Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
=
52
42 41
6
5
43
C31
1/3 49 661
IAI Kfir C7 interior S.A.
49 6611/48 scale detail set for AMK kit • sada detailů pro model 1/48 AMK
ORIGINAL KIT PARTSPŮVODNÍ DÍLY STAVEBNICE
PHOTO-ETCHED PARTSLEPTANÉ DÍLY
PARTS TO BE REMOVEDDÍLY K ODSTRANĚNÍ
FILLTMELIT
eduard
REMOVEODSTRANIT
OPTIONVOLBA?REPLACENAHRADIT
BENDOHNOUT
GRINDOBROUSIT
SYMETRICAL ASSEMBLYSYMETRICKÁ MONTÁŽ
DRILL HOLEVRTAT OTVOR
APPLY EXPRESS MASK AND PAINT BEFORE GLUINGPOUŽÍT EXPRESS MASK NABARVIT PRED SLEPENÍM
1 COLORED ETCHED PARTSLEPTANÉ BAREVNÉ DÍLY
49 661IAI Kfir C7
FILM
=
32
24
2246
20
23
4
C30
=
21
25
31
14
14
53
film2 pcs.
D18
© EDUARD M.A. 2013 www.eduard.com Made in Czech Republic
eduardFor further detail sets look for 48 795 IAI Kfir C2/C7 exterior(not included in this set)
2/3 49 661
=
48
29
3
18
A=
49
28
30
26
15
A
54
19
47
35
J1
7
44 45
51
J2
=
21
11
3838
16 17
27
50
H2, H3,H4, H5
13
12
8
40
36
37
39
34
33
9
10
H1
2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part.
2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem přilepíte, při pokusu o odlepení dojde k poškození dílu.
3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na části dílů, na kterých je naneseno lepidlo.1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames.
1.Samolepící díly oddělujte od rámečku na podkladovém papíře. Po oddělení je sejměte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive.
4. Samolepící díly berte za hrany nebo za části, na kterých není nanesené lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will be permanently affixed when pressed onto its intended location, its location can be adjusted.
5. Díl lehce položte do pozice, ve které má být nalepen. Upravte přesnou pozici a přimáčkněte. Díl dokonale přilne až po přimáčknutí, před přimáčknutím lze dílem opatrně manipulovat.
PARTS WITH GLUE DÍLY OPATŘENÉ LEPIDLEM
3/3 49 661