A

B

（B）OUTPUT1 （B）OUTPUT2

（B）OUTPUT3 （B）OUTPUT4

（C）OUTPUT1 （C）OUTPUT2

（C）OUTPUT3 （C）OUTPUT4

C

B C

2x2 Video wall controller: Cascading mode(Normal mode)

(3 units)2x4 splicing method

Note: Setting unit A splicing mode as 1x2, unit B&C set as 2x2 Connect Output 1 of unit A with input port of unit B, connect output 2 of unit A with input port of unit C, Outputs of unit B&C connect with corresponding displays respectively

A

B D

（B）OUTPUT1 （B）OUTPUT2

（B）OUTPUT3 （B）OUTPUT4

（C）OUTPUT1 （C）OUTPUT2

（C）OUTPUT3 （C）OUTPUT4

（D）OUTPUT1 （D）OUTPUT2

（D）OUTPUT3 （D）OUTPUT4

C

B C D

(4 units)2x6 splicing method

Note: Setting unit A splicing mode as 1x3, unit B,C,D set as 2x2 Connect Output 1 of unit A with input port of unit B, connect output 2 of unit A with input port of unit C, Connect output 3 of unit A with input of unit D. Outputs of unit B,C,D connect with corresponding displays respectively.

（B）OUTPUT1 （B）OUTPUT2

（B）OUTPUT3 （B）OUTPUT4

（C）OUTPUT1 （C）OUTPUT2

（C）OUTPUT3 （C）OUTPUT4

（D）OUTPUT1 （D）OUTPUT2

（D）OUTPUT3 （D）OUTPUT4

（E）OUTPUT1 （E）OUTPUT2

（E）OUTPUT3 （E）OUTPUT4

A

B DC

B C ED

E

(5 units)2x8 splicing method

Note: Setting unit A splicing mode as 1x4, unit B、C、D、E set as 2x2 Connect Output 1 of unit A with input port of unit B, connect output 2 of unit A with input port of unit C, Connect output 3 of unit A with input of unit D, connect output 4 of unit A with input of unit E. Outputs of unit B,C,D,E connect with corresponding displays respectively.

（B）OUTPUT1 （B）OUTPUT2

（B）OUTPUT3 （B）OUTPUT4

（C）OUTPUT1 （C）OUTPUT2

（C）OUTPUT3 （C）OUTPUT4 B

DC

（D）OUTPUT1 （D）OUTPUT2

（D）OUTPUT3 （D）OUTPUT4

A

B DC

(4 units)6x2 splicing method

Note: Setting unit A splicing mode as 3x1, unit B、C、D set as 2x2 Connect Output 1 of unit A with input port of unit B, connect output 2 of unit A with input port of unit C, Connect output 3 of unit A with input of unit D. Outputs of unit B,C,D connect with corresponding displays respectively

（B）OUTPUT1 （B）OUTPUT2

（B）OUTPUT3 （B）OUTPUT4

（C）OUTPUT1 （C）OUTPUT2

（C）OUTPUT3 （C）OUTPUT4

BCDE

（D）OUTPUT1 （D）OUTPUT2

（D）OUTPUT3 （D）OUTPUT4

（E）OUTPUT1 （E）OUTPUT2

（E）OUTPUT3 （E）OUTPUT4

A

B DC E

(5 units)8x2 splicing method

Note: Setting unit A splicing mode as 4x1, unit B、C、D、E set as 2x2 Connect Output 1 of unit A with input port of unit B, connect output 2 of unit A with input port of unit C, Connect Output 3 of unit A with input of unit D, connect output 4 of unit A with input of unit E. Outputs of unit B,C,D,E connect with corresponding displays respectively

A

B

（B）OUTPUT1 （B）OUTPUT2

（B）OUTPUT3 （B）OUTPUT4

（C）OUTPUT1 （C）OUTPUT2

（C）OUTPUT3 （C）OUTPUT4

C

BC

(3 units)4x2 splicing method

Note: Setting unit A splicing mode as 2x1, unit B、C set as 2x2 Connect Output 1 of unit A with input port of unit B, connect output 2 of unit A with input port of unit C, Outputs of unit B.C connect with corresponding displays respectively.

（B）OUTPUT1

（B）OUTPUT3

（B）OUTPUT2

（B）OUTPUT4

（C）OUTPUT1

（C）OUTPUT3

（C）OUTPUT2

（C）OUTPUT4

（D）OUTPUT1

（D）OUTPUT3

（D）OUTPUT2

（D）OUTPUT4

（E）OUTPUT1

（E）OUTPUT3

（E）OUTPUT2

（E）OUTPUT4

B CD E

A

B DC E

(5 units)4x4 splicing method

Note: Setting unit A splicing mode as 2x2, unit B、C、D、E set as 2x2 Connect output 1 of unit A with input port of unit B, connect output 2 of unit A with input port of unit C, connect output 3 of unit A with input of unit D, connect output 4 of unit A with input of unit E. Outputs of unit B,C,D,E connect with corresponding displays respectively.