IBM.Testking.C2010-517.v2015-03-10.by.Carrol - … · IBM Workload Automation V9.2 ... during an IBM Tivoli Workload Scheduler installation on UNIX ... the system hosting the Dynamic

Testking.C2010-517.70 Questions

Number: C2010-517Passing Score: 800Time Limit: 120 minFile Version: 4.6

http://www.gratisexam.com/

C2010-517

IBM Workload Automation V9.2 Implementation

Best stuff I have ever used for my exam preparation. I love Examcollection guys. It allows for the most affordable learning solution without sacrificing the quality of

your exam preparation. This is my first share of braindumps questions. Very helpful study center it is. Best

Testing VCE it is.This is my first share of braindumps questions. Very helpful study center it is. Best

Testing VCE it is. It provides you with exactly the same quality and reliability of our learning materials.

Exam A

QUESTION 1Which utility checks the SOAP port number used by an IBM Tivoli Workload Scheduler instance?

A. backupConfig.shB. modifyThreadPool.shC. showHostProperties.shD. showDataSourceProperties.sh

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 2When uninstalling an IBM Tivoli Workload Scheduler agent from a Windows computer, the to wsinstcommand is run using which option?

A. JavaB. PythonC. Windows PowerShellD. Windows Visual Basic Script

Correct Answer: ASection: (none)Explanation


QUESTION 3How is a successful IBM Tivoli Workload Scheduler agent installation confirmed?

A. Check the master domain manager processes.B. Review the output writtento theinstallation logs.C. Review the IBM WebSphere Application Server installation logs.D. Confirm if the agent is visible from the Dynamic Workload Console.

Correct Answer: DSection: (none)Explanation


QUESTION 4Which task would a Dynamic Workload Console user use to check for a full mailbox on a fault-tolerantagent?

A. ConnectionsB. Check Health StatusC. Monitor Operator MessagesD. Monitor Computers on Broker

Correct Answer: CSection: (none)

Explanation

Explanation/Reference:answered well.

QUESTION 5Which workstation type is required when defining the workstation definition for a dynamic domain managerconfigured as a backup?


A. FTAB. AGENTC. BROKERD. MANAGER

Correct Answer: BSection: (none)Explanation

Explanation/Reference:References:

QUESTION 6When is a local parameter in a job scheduled turn on a fault-tolerant agent (FTA) resolved?

A. When the job runs.B. When the job stream is defined.C. When the FINAL job stream runs.D. When the job stream is submitted.



QUESTION 7Which statement is true when allowing users to authenticate with the same credentials when they use thecomposer command and the Dynamic Workload Console (DWC)?

A. Configure Federated Repositories in the IBM WebSphere Application Server (WAS).B. Configure WAS touse the same directory repository.C. Configure both instances of WAS touse the same LTPA token keys.D. Configure direct connections between the DWC and themaster domain manager using SSLcertificates.



QUESTION 8Which two processes are specific to the dynamic agent?

A. agentB. writerC. mailmanD. batchmanE. JobManager

Correct Answer: DESection: (none)Explanation


QUESTION 9

Which statement is true for the given Security file extract?

A. TWS and root have full access.B. The mastersm role has norights.C. The listed users can only use the default variable table.D. The user must log in as TWS_user or root tohave mastersm access.


Explanation/Reference:properly answered.

QUESTION 10Which log on the system where event processor is running shows the deploying actions of event rules?

A. EventOut.logB. PlanEvent.logC. SystemOut.logD. EventRuleOut.log

Correct Answer: DSection: (none)

Explanation


QUESTION 11Which conman command switches the event processor component?

A. switchmgr <newmgr>B. switchmgr <domain>;<newmgr>C. switcheventpcocessor <workstation>D. switcheventprocessor <domain>;<workstation>



QUESTION 12What is the significance of having more than one two instance<n>TWA.properties file in the /etc/TWAdirectory?

A. There were failed installations.B. The installed instance has been upgraded one or more times.C. There is more than one Tivoli Workload Automation instance installed.D. The Tivoli Workload Scheduler instance has more than one JazzSM profile.



QUESTION 13What is the purpose of running the command conman cancel job <jobselect>; pend?

A. Tocancel the job without prompting.B. Tocancel the job and hold subsequent jobs.C. Tocancel the job and release subsequent jobs.D. Tocancel the job only after its dependencies are resolved.



QUESTION 14Which process can have a lock on the Symphony file?

A. logmanB. planmanC. stagemanD. batchman


Explanation/Reference:correct answer.

QUESTION 15What is the effect on the queue size after running the evtsize <filename> 15000 command on the masterdomain manager (MDM)?

A. It sets the maximum queue size t15,000 bytes.B. It increases <filename> on the local agent by 15,000 bytes.C. It sets <filename> on all agents managed by the MDM t15,000 bytes.D. It increases <filename> on all agents managed by the MDM by 15,000 bytes.



QUESTION 16How are the logging and tracing messages changed for IBM Tivoli Workload Scheduler to identifybatchman issues?

A. Open <TWAhome>/TWS/TWSCCLog.properties and modify the appropriate objects.B. Open <TWShome>/TWS/logs/TWSLog.properties and change the levels toDEBUG_MAX.C. Select the logging and tracing panel in the Dynamic Workload Console and set the appropriate levels.D. Open <WAS_profile_path> /logs/towaserverN and modify the logs.ini file changing the levels toDEBUG

MAX.



QUESTION 17Which directories are created outside of <TWAhome> during an IBM Tivoli Workload Scheduler installationon UNIX systems?

A. /usr/TWA,/etc/ITM,/etc/binB. /etc/TWA,/etc/TWS, /etc/citC. /etc/reports,/etc/DWC,/etc/TEPD. /etc/IBM,/etc/system32,/etc/maestro



QUESTION 18A customized job type has been created to meet a scheduling requirement. What must be done before jobscan be dynamically scheduled using the new job type?

A. The application needs tobe placed in the methods directory and the IBM Workload Automationprocesses restarted.

B. A customized job type plug-in jar file installed on the system hosting the Dynamic Workload Console.CAcustomer needs toinstall Eclipse on the master domain manager (MDM) and migrate the plug-intoenterprise Java.

C. A job type plug-in jar file needs tobe installed on the MDM and the agent running a customized job type.



QUESTION 19Where is the to wsinst output written to when installing an agent on a 64-bit Windows system for usertwa92?

A. c:\temp\logsB. c:\USERS\twa92\logsC. <TWSJNST_DIR>\logs\twsinst_A9.2.0.00.logD. <TWAhome>Mogs\twsinst_WINDOWS_X86_64_twa92.9.2.0.00log



QUESTION 20Which additional feature is provided by integrating IBM Tivoli Workload Scheduler with IBM Tivoli EndpointManager?

A. UpgradingB. MonitoringC. StoragemanagementD. Resourcemanagement


Explanation/Reference:good answer.

QUESTION 21How is job-to-job latency reduced by changing localopts?


A. Set tcp timeout t10.B. Set mm cache size t1024.C. Set jm read, bm read, nm read, and wr read t0.

D. Set localopts jm read, bm read, and bm look t1.



QUESTION 22What must occur in the case of a long-term switch from the primary master domain manager (MDM) to thebackup MDM?

A. Change the IP address of the MDM in the DNS.B. Assign fault-tolerant agentsto thedomain of the new MDM.C. Change all of the workstation definitions toreference the new MDM.D. Change the manager of the master domain in the IBM Tivoli Workload Scheduler database.



QUESTION 23When configuring High Availability for Dynamic Workload Console, which file must be modified to makechanges to DBhost and DBport?

A. security.xmlB. tipha.propertiesC. ha_twa.propertiesD. changeDataSourceProperties



QUESTION 24Which tool upgrades a fault-tolerant agent to IBM Tivoli Workload Scheduler V9.2?

A. silentB. towsinstC. towspatchD. SETUP.bin



QUESTION 25An event processor is running on a master domain manager (MDM) when defining an event rule for a fault-tolerant agent, FTA1, which uses the generic action plug-in run command. Where is the run commandexecuted?

A. onFTA1B. on the MDMC. on the MDM and on FTA1D. on the dynamic domain manager



QUESTION 26Which command is run to extract the IBM Tivoli Workload Scheduler Security file?

A. dumpsecB. composer makesecC. exportSecurity.shD. composer > dumpsec



QUESTION 27What should be checked when a previously working workstation does not link after FINAL job stream runs?

A. POBOX filesB. trace TWSMERGE logC. /etc/TWA toconfirm entry for the workstationD. the output from the composer chs command



QUESTION 28Which database type is bundled with IBM Workload Automation?

A. OracleB. MySQLC. InformixD. IBMDB2



QUESTION 29

Which two options should be set in order for a job to be flagged as mission-critical?

A. CriticalB. MonitoredC. Latest StartD. Job DeadlineE. Requires Confirmation

Correct Answer: ABSection: (none)Explanation


QUESTION 30What is the purpose of the TWSRegistry.dat file?

A. It is a backup of the localopts and current plan.B. It stores the communications attributes for SSL.C. It stores the binary representation of the installed IBM Tivoli Workload Scheduler (TWS) instance.D. It documents all TWS installed components and fixpacks on the machine.



QUESTION 31Which script creates the IBM Tivoli Workload Scheduler SQL tables on a UNIX/Linux system?

A. createdb_root.shB. db_create_root.shC. createdb_<TWSuser>.shD. db create <TWSuser>.sh



QUESTION 32In a working production environment, a customer would like to change the start of day from 0600 t0000 andhave the current plan span 0000-2359 each day.

After changing global option sd. which command fulfills this requirement?

A. JnextPlanB. JnextPlan -t0000C. JnextPlan -for 0000D. JnextPlan -foe 1800



QUESTION 33What are three considerations when planning an IBM Workload Automation V9.2 installation?

A. network topologyB. user rights for applicationC. password retention history rulesD. new changes on the Security fileE. workload environment integration with external systemsF. scope of workload environment static and dynamic elements

Correct Answer: BDFSection: (none)Explanation


QUESTION 34Where are the IBM Installation Manager troubleshooting log files located on Linux/UNIX systems?

A. /etc/TWAB. <instDir>/logsC. <tempDir>/TWA/tws92D. /var/ibm/lnstallationManager/logs


Explanation/Reference:proper answer.

QUESTION 35Which statement is true when the global option enTimeZone is set to No?

A. Values assigned tall time zone keywords in the definitions are ignored.B. IBM Tivoli Workload Scheduler converts the value set for the time zones intoobject definitions.C. Values assignedto thestartOfDay option on the master domain manager is not converted tolocal time.D. Values assignedto thetime zone settings are used tocalculate the time when the jobs and job streams

run on the target workstations.



QUESTION 36Which command cleans up job log files that are over 10 days old on a master domain manager or fault-tolerant agent?

A. logmanB. cancelC. delete

D. rmstdlist



QUESTION 37What must be done to enable the calculation of predicted start times for each job based on the average jobdurations?

A. Change the enForecastStartTime global option.B. Change the enForecastJobDuration global option.C. Run the dbforecast.sh script from the dbtools directory.D. Create the forecast using the planman crtfc -starttimes option.



QUESTION 38A calendar can be specified with which three jobs stream keywords?

A. ONB. NEEDSC. EXCEPTD. DEADLINEE. FREEDAYSF. SCHEDTIME

Correct Answer: BCDSection: (none)Explanation


QUESTION 39Which command confirms if the event management feature is enabled?

A. optmanshowedB. planman showinfoC. conmanstarteventprocessorD. showEventProcessorProperties.sh



QUESTION 40Which statement is true if a time restriction is specified in a run cycle group and in the job stream's ATtime?

A. The time restriction in the run cycle group takes precedence.B. A time restriction in the job stream's AT time takes precedence.C. Twooccurrences of the job stream are produced in the preproduction plan, one for each time restriction.D. The time restriction in the run cycle group takes precedence only if it is later than the job stream's AT

time.



QUESTION 41Which value must the enCarryForward global option be set tin order for incomplete job streams to carryforward when running JnextPlan -for 0000?

A. ONB. NC. ALLD. ALWAYS



QUESTION 42When troubleshooting event rules, which option is checked by the command optman 1s?

A. Ifthe rule is activeB. If the rule has been performedC. If event drivenworkload automation is enabledD. If the deployment of the new monitoringconfiguration worked correctly



QUESTION 43How is security access granted to run reports using the Dynamic Workload Console (DWC)?

A. Use the command line command composer togrant the access.B. Open the DWC and select the Security panel, then select the access tobe granted.C. Update the Security file togive the user ADD,DISPLAY access for the REPORT object.D. Run the report command from the command line and enter the access code at the prompt.



QUESTION 44Which action is required before a Dynamic Workload Console user can monitor workload on a new IBMTivoli Workload Scheduler (TWS) engine?

A. Define the scheduling environment.B. Create a connectionto theTWS engine.C. Define the scheduling objects in the database.D. Create tasks tomanage TWS objects in the plan.



QUESTION 45Which IBM Tivoli Workload Scheduler command can be used to import a workload application on UNIX/Linux?

A. optmanB. wappmanC. dataimportD. datamigrate



QUESTION 46Courier.msg is growing and TWSMERGE log contains a very large number of Check n(On) entries.What can be done to reduce the number of On entries?

A. Set jm check in localopts toa lower number.B. Set wr check in localopts toa larger number.


C. Set bm check file in localopts toa larger number.D. Increase the size of the Courier.msg file using evtosize.


Explanation/Reference:good answer.

QUESTION 47What must be configured when there is a requirement for more than one IBM WebSphere ApplicationServer to connect?

A. server.xmlB. WAS profileC. SSL certificatesD. LTPA token keys



QUESTION 48Which additional feature is provided by integrating IBM Tivoli Workload Scheduler with IBM Tivoli EnterpriseConsole?

A. UpgradingB. MonitoringC. StoragemanagementD. Resourcemanagement


Explanation/Reference:

QUESTION 49Which log should be reviewed if a job running on a fault-tolerant agent (FTA) abends?

A. joblogB. SystemOut.logC. TWSMERGE on the FTAD. TWSMERGE on the master domain manager



QUESTION 50The scripts, tws_env.cmd (Windows) and tws_env.sh (UNIX), are used for which purpose?

A. Toturn auditing on and off.B. Torun jobs in the correct directories.C. Toconfigure the IBM Tivoli Workload Scheduler environment.D. Toset up SSL connections between the master domain manager and the dynamic agents.



QUESTION 51What will be the effect of jobs on a workstation if the workstation FENCE is set to GO?

A. Jobs will not run.B. Jobs with a priority of 101 will runC. Jobs with a priority of Gowill run.D. All jobs will get have a priority of GO.



QUESTION 52Where is the ResourceAdvisorUrl parameter changed in order to configure an existing dynamic agent tocommunicate this master domain manager or dynamic domain manager through a local gateway?

A. ITA.iniB. preferences.iniC. JobManager.iniD. JobManagerGW.ini



QUESTION 53Which command launches the tutorial utility installation script when populating a test environment?

A. IBMIM.shB. customizeDB.shC. createSample.shD. sampledbsetup.sh



QUESTION 54A workstation has a FENCE of 10, LIMIT of 5, and a job with a priority of 10 currently on HOLD.What must be changed to enable a job to launch?

A. Change the FENCE t9.B. Change the workstation LIMIT t0.C. Change the workstation LIMIT t10.D. Change the job stream PRIORITY toGO.


Explanation/Reference:appropriate answer.

QUESTION 55Which three IBM Tivoli Workload Scheduler processes trigger the first failure data capture (collector.shscript) in the event of failure?

A. writerB. netmanC. mailmanD. monmanE. stagemanF. batchman

Correct Answer: BCFSection: (none)Explanation


QUESTION 56Which three services should be running on a Windows server for an active IBM Tivoli Workload Schedulerfault-tolerant agent installed under the to twsuser account?

A. Tivoli Writer (for <TWSuser>)B. Tivoli Netman (for <TWSuser>)C. Tivoli Network (for <TWSuser>)D. Tivoli Batchman (for <TWSuser>)E. Tivoli Token Service (for <TWSuser>)F. Tivoli Workload Scheduler (for <TWSuser>)

Correct Answer: ABDSection: (none)Explanation


QUESTION 57When creating a new job stream using the Dynamic Workload Console, what are the minimumrequirements for a job stream to be selected for launch after FINAL job stream introduces a new Plan?

A. RunCycle and at least one jobB. RunCycle and not in Draft modeC. At least one job and not in Draft modeD. A scheduled timespecified and not in Draft mode



QUESTION 58What is the first step when upgrading an IBM Tivoli Workload Scheduler V8.6 fault-tolerant agent (FTA)with a distributed connector?

A. Upgradethe FTAB. Uninstallthe FTAC. Upgradethe connectorD. Uninstallthe connector


Explanation/Reference:proper answer.

QUESTION 59What is the purpose of the planman command?

A. Todisplay information from an archive planB. Tocreate a trialplan and create a forecast planC. Tolist the previousplans and lock the current planD. Tolist previous plans and switch ta previous plan



QUESTION 60Which file is used to store common options when configuring IBM Tivoli Workload Scheduler forApplications SAP R/3?

A. r3optsB. globaloptsC. <XA>_r3optsD. r3batch.opts



QUESTION 61Which IBM WebSphere Application Server utility is used to change the j2cPassword property?

A. updateWas.shB. changeHostProperties.shC. changeSecurityProperties.shD. changeDataSourceProperties.sh



QUESTION 62

What are the two main object types of event management plug-ins?

A. AlertB. Action


C. ConditionD. ReportingE. Monitoring

Correct Answer: BCSection: (none)Explanation


QUESTION 63What are three parameters that can be configured in the localopts file?

A. plan auditingB. mailman cachingC. agent SSL configurationD. netman configuration parametersE. number of days tosave job statisticsF. maximum length of the preproduction plan in days

Correct Answer: BCFSection: (none)Explanation

Explanation/Reference:Nicely answered.

QUESTION 64A job in a Windows environment abends when run through IBM Tivoli Workload Scheduler (TWS). but itworks when a user logs in and runs it. Which option can resolve this issue after the option is changed andnetman is restarted?

A. Set local option jm load user profile toOn.B. Set local option jm load user profile toYes.C. Set global option jm load user profile toOn.D. Set global option jm load user profile toYes.



QUESTION 65What should be used as a backup master domain manager (MDM) for an AIX 64-bit MDM?

A. z/OSB. i SeriesC. HP-UX (ia64>D. Windows (32-bit)



QUESTION 66Which command can move the event processor function to a different eligible workstation?

A. planman -deployB. conman switchmgrC. optman chg=evtprocD. conman switcheventprocessor



QUESTION 67Given a running IBM Tivoli Workload Scheduler (TWS) environment, which IBM product after beingintegrated with TWS delivers automatic High Availability of TWS components?

A. IBM Tivoli Endpoint ManagerB. IBM SmartCloud ProvisioningC. IBM Tivoli System Automation for MultiplatformsD. IBM Tivoli System Automation Application Manager



QUESTION 68Which conman command confirms if any event rules are deployed on the workstation LINUX01?

A. scLINUX01;infoB. scLINUX01;getmonC. showcpusLINUX01;keysD. showcpusLINUX01;link



QUESTION 69Which script upgrades the IBM Tivoli Workload Scheduler database from a previous version?

A. dbgrant.shB. UpgradeDB.shC. createdb_root.shD. migratedb_root.sh


Explanation/Reference:updated answer.

QUESTION 70Which object exists independently in the database and can be used in multiple job streams?

A. run cycleB. local promptC. run cycle groupD. follows dependency




Documents

IBM.Testking.C2010-517.v2015-03-10.by.Carrol - … · IBM Workload Automation V9.2 ... during an IBM Tivoli Workload Scheduler installation on UNIX ... the system hosting the Dynamic