Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
ICATeM 2018, ICRIS 2018 & ICBME 2018
1
ICATeM 2018, ICRIS 2018 & ICBME 2018
2
CONTENTS
Foreword from Dean, Faculty of Mechanical Engineering 3
Conference Information 4
Keynote Speaker 1 5
Keynote Speaker 2 6
Keynote Speaker 3 7
Keynote Speaker 4 8
Program Schedule 9
ICATeM 2018 11
ICRIS 2018 18
ICBME 2018 22
ICATeM 2018 Committee 32
ICBME 2018 Committee 33
ICRIS 2018 Committee 34
Secretariat, Treasurer, Technical and Logistics Committee 34
Notes 35
ICATeM 2018, ICRIS 2018 & ICBME 2018
3
FOREWORD FROM THE DEAN, FACULTY OF MECHANICAL ENGINEERING
Welcome to all conference participants. This is the first time the
Faculty of Mechanical Engineering UiTM is organising three
parallel conferences simultaneously;
International Conference on Aviation Technology and
Management (ICATEM2018)
International Conference on Biomechanics and
Biomedical Engineering (ICBME2018)
International Conference on Robotics and Intelligent
System (ICRIS2018)
This special event marks an important milestone for the faculty to
provide a platform for presenting, discussing and networking of
research findings among the participants. I believe that
participants from different countries, culture and background
attending this conference will have one ultimate goal; to start or
expand their current networking within and outside of each other’s discipline.
Multidisciplinary and interdisciplinary research is the way forward in the research topics.
Fast advancement in technology creates new problems and questions, resulting in a real need
for sharing multidisciplinary and interdisciplinary research topics. Hence these parallel
conferences are organised to facilitate the participants to interchangeably attend any
conference of their interests seamlessly. All participants of these conferences can easily
share and discuss any of the issues, challenges, and opportunities of research collaboration
that can be further explored. I hope that you will find these conferences useful, exciting and
inspiring.
I would like to take this opportunity to express my gratitude and appreciation to all of
the reviewers who have helped in maintaining the high quality of manuscripts. I would also
like to extend my thanks to the members of the organizing team for their hard work and
excellent job in organizing this event. I wish that all participants have a wonderful and
fruitful time at the conferences, and that our oversea participants will enjoy their stay in
Kuala Lumpur, Malaysia. Finally, thank you very much for being part of this conference.
Your presence is highly appreciated and valued.
Prof. Ir. Dr. Muhammad Azmi bin Ayub
Dean
Faculty of Mechanical Engineering
University Technology MARA UiTM, Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
4
CONFERENCE INFORMATION
Date
12 – 14 September 2018
Venue
Publication
All accepted papers will be published on a special issue of:
International Journal of Engineering & Technology (IJET) (ISSN 2227-524X) (indexed by
SCOPUS, Google Scholar, etc.)
Organizer
BIOMECHANICAL
AND CLINICAL
ENGINEERING
(BIOMEC) RIG
ICATeM 2018, ICRIS 2018 & ICBME 2018
5
Keynote Speaker 1
YBhg. Prof. Dato’ Ir. Dr. Mohammed Rafiq b. Dato’ Abdul Kadir
Dean, Faculty of Engineering, Universiti Teknologi Malaysia
Biodata
Prof. Dato' Ir. Dr. Mohammed Rafiq bin Dato’ Abdul Kadir is a
Professor of Biomedical Engineering and Dean Faculty of
Engineering, Universiti Teknologi Malaysia (UTM). His career
brings over a wealth of experience in research, teaching,
administration, community service as well as practising engineer.
He obtained his first degree in Mechanical Engineering from a
renowned varsity, Imperial College London, and then spent a
year at the University of Cambridge for postgraduate studies. He
later returned to Imperial College London for PhD research in
Biomedical Engineering. His thesis on Cementless Hip
Arthroplasty was accepted without correction. Upon completing
his Ph.D. in 2005 he joined UTM as an academic staff. He was
promoted to Senior Lecturer in 2008, Associate Professor in 2010,
and three years later to a full Professor.
Dato‘ Rafiq established the Medical Devices & Technology Group (MEDITEG) in 2006, and within a
span of ten years, he managed to secure 95 research grants for the group with a total amount of over
RM10 million. He has published over 300 SCOPUS indexed publications in the field of biomedical
engineering and related technologies. Out of these outstanding number of publications, 135 of them
are listed in ISI indexed journals with a cumulative impact factor of 288.214. His current h-index is 23.
His contributions in scientific community also include seven books and 93 proceedings. Besides his
intellectual role in academics, Dato‘ Rafiq is also a prolific innovator. According to MyIPO Database
on Patents (2001-2014), he is Malaysia’s #1 Inventor with 27 Patents Granted. Under his supervisions,
34 PhD students and 35 Masters by research have successfully graduated in various Biomedical
Engineering sub-expertise. Dato‘ Rafiq is a visionary academician and utilizes creativity and
innovation in his teaching and supervision technique. He has been invited in numerous occasions to
facilitate courses on creativity & innovation, as well as on Leadership. He is registered at the Board of
Engineers Malaysia (BEM) as a Professional Engineer with Practising Certificate, and had been
appointed as consultant for several companies.
Keynote Title: Biomechanics & Biomaterials Advances in Medical Applications
Biomechanical analyses, especially in the areas of orthopaedics, dentistry and cardiovascular, has
evolved from purely experimental to a more numerical and computational. These numerical methods
have been successfully used for predicting the outcome of various surgical procedures. More intricate
anatomical models can now be constructed, with time taken to solve the numerical analysis no longer
becoming an issue. Short term and long term predictions of surgical outcomes in complex joints such
as the spine and the wrist can be done with greater efficiency. Comminuted bone fracture healing can
also be simulated with greater accuracy. Other than biomechanics and related analysis, biomaterials
also play a crucial role with research areas focusing on enhanced properties to promote better
integration with human tissues for faster healing and recovery. Magnesium has been the centre of
attention for its high specific stiffness as well as its degradation behavior inside human body.
Enhancement of magnesium alloys include the addition of Calcium and Bismuth as well as coating of
its surface with Silicon biopolymer, fluorine, hydroxyapatite and polycarbonate. Nanocomposites of
Mg/HA/MgO and Mg/HA/TiO2 were also developed. Other biometals under investigation are silver
nanoneedles and cobalt-chromium-based alloys. Research on the enhancement of HA includes the
addition of Barium-fluoride and Erbium, as well as developing bioglass using rice husk. Quinone-rich
polydopamine functionalization of yttria-stabilized-zirconia has also been found to enhance the
growth of apatite biomineralization.
ICATeM 2018, ICRIS 2018 & ICBME 2018
6
Keynote Speaker 2
YBhg. Datuk Wan Hasmar Azim Wan Hassan
Chief Operating Officer, Weststar Aviation Services Sdn. Bhd.
Biodata
Datuk Wan Hasmar Azim is the Chief Operating Officer of
Weststar Aviation Services Sdn Bhd, the largest Oil and Gas
helicopter transportation company operating in South East
Asia. An experienced Licensed Aircraft Engineer with huge
exposure in Engineering Maintenance, Flight Operations
and Airline Management, Datuk Wan Hasmar started his
aviation career in Malaysia Airlines. He then moved on to a
new start-up airline, AirAsia in 1996 which later became the
most well known Low Cost Airline in Asia. Initially as
AirAsia Technical Director, he was part of the management
team which made AirAsia a phenomenal success, expanding
his exposure and later hold the position of Vice President of
Operations managing joint ventures, flight operation, ground operations and engineering
maintenance. After the success of AirAsia, Datuk Wan Hasmar moved on to become an
expatriate in Indonesia as the Technical Director of TigerMandala Airlines and thereafter
moved to the Middle East as FLYNAS Chief Operating Officer, the second National Airline
of Saudi Arabia. Having International experience coupled with strengths in Engineering,
Procurement, Flight Operations and Airline Management, Wan Hasmar has been pivotal in
transforming and rebranding of Flynas and has helped the airline to become a formidable
operator in the Middle East. With the Oil and Gas aviation exposure he currently have, he
now gains comprehensive experience in aviation as a whole thus a valuable part of Weststar
Aviation team.
Keynote Title: Challenges in Southeast Asia Oil & Gas Helicopter Industry
Datuk Wan Hasmar will elaborate on the many challenges in south East Asia oil and gas
Industry. He will give focus on key areas, primarily on the stringent standard and requirement
of the oil and gas industry on which Weststar Aviation operates. The high standard of
maintenance required on its operational machine, preventive maintenances and the process to
train the highly skilful workforce. He will also share his vast experience in engineering and
aviation management on the challenges operating an Off-Shore Helicopter operation.
ICATeM 2018, ICRIS 2018 & ICBME 2018
7
Keynote Speaker 3
En. Mohd Hisham Ab Samad
General Manager, Project and Technical, UMW Manufacturing & Engineering Sdn. Bhd.
Biodata
Mohd Hisham Ab Samad was graduated from Vrije
Universiteit Brussel, Belgium in Mechanical and
Electrical Engineering in 1991. Started his career in
Electronic and Microelectronics Industries in SONY and
later Motorola Semiconductor before joining UMW in
1997 as Engineering Section Head in UMW Auto Parts
Sdn. Bhd. Since then, in 21 years in UMW, he's been in
various industries and responsibilities, from automotive
component manufacturing, metal fabrication and lubricant.
The latest was project management for UMW ventures
into Aerospace component manufacturing. it's a grounds
up and pioneering project for UMW to be Tier-1 supplier
for Rolls Royce Civil Aircraft engine. In the span of 26
year working life, he developed in depth manufacturing skill set especially in Lean
management, Engineering design, product development and costing. And in later years into
marketing and business management.
Keynote Title: Building New Capabilities for the Nation
A brief introduction to UMW Group of the companies and about our strategy on High Value
Manufacturing (HVM). UMW use Rolls Royce Fan Case Assembly project to leapfrog our
way into HVM. There are specific challenges that we face in the meeting the deadline.
Building the factory and equipped it with the right capability is only part of the problem. We
faced more challenges in getting the workforce fully trained to the required skillset and
certified, and about coming up with the right culture for HVM.
ICATeM 2018, ICRIS 2018 & ICBME 2018
8
Keynote Speaker 4
Associate Professor Dr. Hanafiah Yusof
Chief Executive Officer, Robopreneur Sdn. Bhd.
Faculty of Mechanical Engineering, Universiti Teknologi MARA Malaysia
Biodata
Dr. Hanafiah Yussof graduated from Iwate University Japan
in 1998 in Mechanical Engineering, and started his career as
Engineer at the Research & Design unit, Sharp Electronics
Malaysia. After 3 years, Dr. Hanafiah pursued his interest in
robotics. He continued his Masters study at Yamagata
University Japan, with research focusing on humanoid
robots and further incorporated sensor application in robots
during his PhD at Nagoya University until 2008. He
continued as JSPS Postdoctoral researcher in Nagoya
University and completed his Postdoctoral research in 2010,
which focused on development of optical 3-axis tactile
sensor for application in humanoid robot. Dr. Hanafiah is
currently the CEO of Robopreneur Sdn Bhd, and holding a
post as an Associate Professor in the Faculty of Mechanical Engineering, Universiti
Teknology MARA. He is also the Visiting Professor in University of Toyama, Visiting
Researcher in Nagoya University and Hosei University Japan.
His achievement and recognition in the area of robotics is nothing shy of exceptional. He has
won several academic and research awards including more than 8 Best Paper Awards at
various international conferences. In 2010, the American Society of Mechanical Engineering
(ASME) Dynamic Systems and Control Division (DSCD) awarded Dr Hanafiah with the Best
Paper Award in Mechatronics. In 2016, he was awarded the Best Researcher Award by UiTM.
Dr. Hanafiah was the past Chairman of IEEE Robotics and Automation Society (RAS)
Malaysia Chapter from 2013 until 2015. He also the founder and heads the Center of
Excellence for Humanoid Robotics and Bio-Sensing (HuRoBs), and Head of Business Unit in
the Faculty of Mechanical Engineering, UiTM. He has received more than RM6 million
research grants in UiTM, including for his research on application of humanoid robot for
children with autism. His had also served as an editor in several high-impact international
journals, and founder of IEEE International Conference on Robotics and Intelligent Sensors
(IRIS) and International Robot PRIDE competition.
Keynote Title: Service Robotics Industry: Development and Challenges
It is all about managing future demand. In order to have something that we never had, we
must do something that we never did. Learn how to manage your future demand by
empowering your supply capability. "The Next Big Things" is always "A Nice to Have
Things", don't confuse between Dream and Demand. Focus on the values. The future
breakthrough is not totally relying on AI, Machine Learning and etc., because those are only
the key enablers. The future is relying on how well we balance between economic innovation
and humanity innovation. Disruptive innovation may only impact economy, but not humanity
as a whole.
ICATeM 2018, ICRIS 2018 & ICBME 2018
9
PROGRAM SCHEDULE
Wednesday, 12 September 2018
Hotel Lobby
14:00 – 17:00 Registration
Thursday, 13 September 2018
Pacific Ballroom
08:00 – 08:20 Opening Remarks
08:20 – 08:45 Keynote Speech 1
Prof. Dato’ Ir. Dr. Mohammed Rafiq b. Dato’ Abdul Kadir
Biomechanics & Biomaterials Advances in Medical Applications
08:45 – 09:10 Keynote Speech 2
Datuk Wan Hasmar Azim Wan Hassan
Challenges in Southeast Asia Oil & Gas Helicopter Industry
09:10 - 09:35 Keynote Speech 3
Mr. Mohd Hisham Ab Samad
Building New Capabilities for The Nation
09:35 – 10:00 Keynote Speech 4
Assoc. Prof. Dr. Hanafiah Yusof
Service Robotics Industry: Development and Challenges
10:00 – 10:30 Photo Session & Coffee Break
Bunga Kenanga Bunga Tanjung Bunga Melor Pacific Ballroom
10:30 – 11:45 ICATeM -1 ICRIS - 1 ICBME – 1 ICBME – 5
11:45 – 13:00 ICATeM -2 ICRIS - 2 ICBME – 2 ICBME – 6
13:00 – 14:00 Lunch Break
14:00 – 16:00 ICATeM -3 ICRIS - 3 ICBME – 3 ICBME – 7
16:00 – 16:15 Coffee Break
16:15 – 17:45 ICATeM -4 ICRIS - 4 ICBME – 4 -
Ballroom Foyer
10:00 – 16:00 Poster Presentation
Friday, 14 September 2018
Hotel Lobby
08:00 – 13:00 Academic Visit
Assemble at Hotel Lobby
ICATeM 2018, ICRIS 2018 & ICBME 2018
10
SCIENTIFIC PROGRAM
Thursday, 13 September 2018
08:00 – 08:20
Pacific Ballroom Opening Remarks
08:20 – 08:45
Keynote Speech 1
Biomechanics & Biomaterials Advances in Medical Applications
Prof. Dato’ Ir. Dr. Mohammed Rafiq b. Dato’ Abdul Kadir
Dean, Faculty of Engineering
Universiti Teknologi Malaysia
08:45 – 09:10
Keynote Speech 2
Challenges in Southeast Asia Oil & Gas Helicopter Industry
Datuk Wan Hasmar Azim Wan Hassan
Chief Operating Officer, Westar Aviation Services Sdn. Bhd.
09:10 – 09:35
Keynote Speech 3
Building New Capabilities for The Nation
Mr. Mohd Hisham Ab Samad
General Manager (Project & Technical), UMW Manufacturing &
Engineering Sdn. Bhd.
09:35 – 10:00
Keynote Speech 4
Service Robotics Industry: Development and Challenges
Assoc. Prof. Dr. Hanafiah Yusof
Chief Executive Officer, Robopreneur Sdn. Bhd. &
Universiti Teknologi MARA Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
11
INTERNATIONAL CONFERENCE ON AVIATION TECHNOLOGY &
MANAGEMENT 2018 (ICATeM 2018)
BUNGA KENANGA ROOM
10:30 – 11:45
Bunga Kenanga
Room
Session A1 – Aerodynamics
Chairperson: Dr.-Ing. Alhassan Salami Tijani
ICATeM 51
10:30 – 10:45
Thermal Energy Recovery from a Grid Connected Photovoltaic-
Thermal (PVT) System using Water as Working Fluid
Alhassan Salami Tijani, Amer Farhan Bin Md Tahir, Jeeventh
Kubenthiran, Baljit Singh Bhathal Singh
Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Malaysia
ICATeM 35
10:45 – 11:00
Review of Photovoltaic Cells for Solar-Powered Aircraft
Applications
Safyanu Bashir Danjuma1, Zamri Omar1, Mohd Noor Abdullah2 1Faculty of Mechanical and Manufacturing Engineering and 2Faculty
of Electrical and Electronics Engineering, Universiti Tun Hussein Onn
Malaysia
ICATeM 31
11:00 – 11:15
Effect of Wing Locations to the Aerodynamic of UiTM’s Blended
Wing Body-Unmanned Aerial Vehicle (BWB-UAV) Prototype
Farah Diyana Nasri Huang1, Wirachman Wisnoe1, Rizal Effendy
Mohd. Nasir1, Ehan Sabah Shukri Askari2 1Flight Technology and Test Centre (FTTC), Faculty of Mechanical
Engineering, Universiti Teknologi MARA, Malaysia 2Engineering Technical College-Baghdad, Middle Technical
University (MTU), Baghdad, Iraq
ICATeM 11
11:15 – 11:30
Effect of Outward and Inward Dimple Located on Different
Positions of Aerofoil Section at a Typical Low Reynolds Number
P. A. Aswatha Narayana, Rasya K. A., Spoorthi S. Prasad
Department of Aerospace Engineering, International Institute for
Aerospace Engineering and Management, Jain University, Bengaluru,
India
ICATeM 2018, ICRIS 2018 & ICBME 2018
12
ICATeM 17
11:30 – 11:45
Comparison on the Aerodynamic Coefficients Obtained from
Three Different Size of Wind Tunnel Model on Baseline V Set at 45
degree Sweep Tail Angle
Mohamad Zulfazli Arief Bin Abd Latif1, Rizal Effendy Mohd Nasir1,
Muhammad Aiman Bin Ahmad1, Wirachman Wisnoe1, Wahyu
Kuntjoro1, Iskandar Shah Ishak2 , Mohd Rashdan Saad3 1Aviation Tech. Research Group, Flight Tech. & Test Centre, Faculty
of Mechanical Engineering, Universiti Teknologi MARA, Malaysia 2AEROLAB, Dept. Of Aeronautical, Automotive and Ocean
Engineering, Faculty of Mechanical Engineering, Universiti Teknologi
Malaysia 3Faculty of Mechanical Engineering, Universiti Pertahanan Nasional
Malaysia
11:45– 13:00
Bunga Kenanga
Room
Session A2 - Aerodynamics
Chairperson: Mr. Wah Yen Tey
ICATeM 24
11:45 – 12:00
Numerical Modelling of Convective Wave Using Fractional-Step
Method
Wah Yen Tey1,2, Jared Tang Tze Hou2, Hooi Siang Kang3 1Department of Mechanical Engineering, Faculty of Engineering,
UCSI University. Kuala Lumpur, Malaysia 2Takasago i-Kohza, Malaysia-Japan International Institute of
Technology, Universiti Teknologi Malaysia 3Faculty of Mechanical Engineering, Universiti Teknologi Malaysia
ICATeM 32
12:00 – 12:15
Performance of a Monarch Butterfly for Various Flapping Angle
Aaroh1, Mohammad Zuber1, Shah Md Abdul Khader2, Sagar
Kalburgi1, Ernnie Illyani Basri3, Kamarul Arifin Ahmad3 1Department of Aeronautical & Automobile Engineering, Manipal
Institute of Technology, MAHE, Manipal, Karnataka, India 2Department of Mechanical & Manufacturing Engineering, Manipal
Institute of Technology, MAHE, Manipal, Karnataka, India 3Department of Aerospace Engineering, Universiti Putra Malaysia
ICATeM 20
12:15 – 12:30
The Effect of Wing Margin Shape Generalisation on the
Aerodynamic Performance of a Bat Inspired Wing
Shafiq Suhaimi1, Solehuddin Shuib1, Hamid Yusoff2, and A. Halim
Kadarman3 1Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Malaysia 2Faculty of Mechanical Engineering, Universiti Teknologi MARA
Pulau Pinang, Malaysia 3School of Aerospace Engineering, Universiti Sains Malaysia
ICATeM 05
12:30 – 12:45
Contra Rotating Ducted Propeller Analysis Using Computational
Fluid Dynamic
Putra Adnan Fadilah, Dadang Furqon Erawan
Chroma International, Bandung, Indonesia
ICATeM 2018, ICRIS 2018 & ICBME 2018
13
ICATeM 22
12:45 – 13:00
The Development of Student Station for Drag Polar Testing
Ony Arifianto, Hari Muhammad, Pramesthi Sukma Windratih, Imam
Safi’i
Faculty of Mechanical and Aerospace Engineering, Institut Teknologi
Bandung (ITB), Bandung, Indonesia
14:00– 16:00
Bunga Kenanga
Room
Session B - Aircraft Structure & Flight Dynamics
Chairperson: Assoc. Prof. Dr. Mohd Harridon bin Mohamed Suffian
ICATeM 29
14:00 – 14:15
Rate of Perceived Exertion of Potential Avionics Male Students
and Proposed Exercises to Decrease Strain
Mohd Harridon
Universiti Kuala Lumpur, Malaysia
ICATeM 28
14:15 – 14:30
Educational Software for Stress Analysis of Idealized Closed Thin
Walled Sections
J. S. Mohamed Ali, Hasna Nur Fadhila, Burhani M. Burhani, Miah
Mohammed Riyadh
Dept. of Mechanical Engineering, International Islamic University
Malaysia, Kuala Lumpur, Malaysia
ICATeM 46
14:30 – 14:45
Flutter Analysis of High Aspect Ratio Wing of Sailplane Aircraft
Anis Khoirun Nisa, Yorgi A. Ndaomanu, R.A. Sasongko1, L.
Gunawan, T. Mulyanto, Annisa Jusuf
Flight Phtsics Research Group, Faculty of Mechanical and Aerospace
Engineering, Institut Teknologi Bandung, Indonesia
ICATeM 15
14:45 – 15:00
Numerical Simulation Platform for a Generic Aircraft Flight
Dynamic Simulation
Adam Adila Arif, Stepen, Rianto Adhy Sasongko
Institut Teknologi Bandung, Faculty of Mechanical and Aerospace
Engineering, Indonesia
ICATeM 30
15:00 – 15:15
A Matlab Based Educational Software for the Study on the Effect
of Cut-Out in Aircraft Wings
Miah Mohammed Riyadh, J. S. Mohamed Ali
Dept. of Mechanical Engineering, International Islamic University
Malaysia, Kuala Lumpur, Malaysia
ICATeM 14
15:15 – 15:30
Development of Motion Manipulator System for a Generic
Aircraft Flight Dynamics Simulator
Yusuf Kurniawan Asalani, Rianto Adhy Sasongko, Ony Arifianto
Flight Physics Research Group, Faculty of Mechanical and Aerospace
Engineering, Institut Teknologi Bandung, Indonesia
ICATeM 2018, ICRIS 2018 & ICBME 2018
14
ICATeM 34
15:30 – 15:45
Trilinear Finite Element Solution of Three Dimensional Heat
Conduction Partial Differential Equations
Erwin Sulaeman1, S. M. Afzal Hoq1,4, Abdurahim Okhunov2, Marwan
Badran3 1Department of Mechanical Engineering, International Islamic
University Malaysia 2Department of Science in Engineering, International Islamic
University Malaysia 3Department of Mechatronics Engineering, International Islamic
University Malaysia 4Department of Civil Engineering, Southern University Bangladesh,
Bangladesh
ICATeM 44
15: 45– 16:00
Simulation and Analysis of Aircraft Dynamic Response in The
Presence of System Failures
Adam Adila Arif, Rianto Adhy Sasongko
Institut Teknologi Bandung, Faculty of Mechanical and Aerospace
Engineering, Indonesia
16:15– 17:45
Bunga Kenanga
Room
Session C - Aviation Management & UAV
Chairperson: Prof. Dr. Kuncoro Diharjo
ICATeM 26
16:15 – 16:30
Effect of Particles Content And Size on Density, Void and Tensile
Properties of Sokka-Clay/Phenolic Composite
Kuncoro Diharjo, Yudit C. N. Nyoto Saputro, Triyono
Mechanical Engineering Department, Engineering Faculty, Sebelas
Maret University, Indonesia
ICATeM 03
16: 30– 16:45
The Use of Drone in Property Valuation
Nurul Ain Wahida Mohd Radzali, Khairul Nizam Tahar
Centre of Studies for Surveying Science and Geomatics, Faculty of
Architecture, Planning and Surveying, Universiti Teknologi MARA,
Malaysia
ICATeM 12
16: 45– 17:00
Aviation Safety Management: Minimizing the Deleterious Effect of
an Aviation Disaster
Ainul Hafiza Zainudin1, Nor Akhmal Hasmin1, Ahmad Waseem
Dhihny1, Rohani Mohd Shah2 1Fakulti Undang-Undang, Universiti Teknologi MARA, Malaysia 2Pusat Asasi, Universiti Teknologi MARA, Dengkil Campus, Malaysia
ICATeM 53
17: 00– 17:15
General Aviation in Iran - Challenges and Opportunities
Meysam Mohammadi-Amin, Nima Karimi
Aerospace Think Tank, Aerospace Research Institute, Tehran
1465774111, Iran
ICATeM 2018, ICRIS 2018 & ICBME 2018
15
ICATeM 18
17: 15– 17:30
Extraction of Building Footprints from Different Unmanned
Aerial Vehicle (UAV) Platforms
Nabila Ismail, Khairul Nizam Tahar
Centre of Studies for Surveying Science and Geomatics, Faculty of
Architecture, Planning and Surveying, Universiti Teknologi MARA,
Malaysia
ICATeM 37
17: 30– 17:45
Assessment of images of birds captured by low-cost drone using
Agisoft Photoscan
Adry Aqil Nizamudin1, Wan Mazlina Wan Mohamed1,2 1Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Shah Alam 2Malaysia Institute of Transport (MITRANS), Universiti Teknologi
MARA, Malaysia
POSTER PRESENTATION
BALLROOM FOYER
10:00-16:00
ICATeM 02
Preliminary Study On Air Traffics Density of Peninsular Malaysia
Using Visual Flight Path Trajectories From Automatic Dependent
Surveillance-Broadcast (ADS-B) Data
Masnawi Mustaffa1, Shaharudin Ahmad2, Radhiah Mohd Nor1, Nur
Hidayah Binti Zahari1 1Faculty of Applied Sciences, Universiti Teknologi MARA, Malaysia 2Faculty of Mechanical Engineering,Universiti Teknologi MARA,,
Malaysia
ICATeM 04
Effect of Turbulence Intensity on Low Reynolds Number Airfoil
Aerodynamics
Ashish Kumar Gupta, P. A. Aswatha Narayana, G. Ramesh
Dept. of Aerospace Engg., Jain University, NH-209, Jakkasandra Post,
Ramanagara Dist.-562112, KK, India
ICATeM 08
Roles of Atomizing Gas in Swirl Effervescent Atomization
Ahmad H. A. Hamid, Zulkifli A. Ghaffar , Nurulhanis C. Rus
Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Malaysia
ICATeM 16
The Effect of Slurry Erosion Wear on Boronized Ductile Iron
Bulan Abdullah, Khalissah Yusof, Abu Zarr Ahmad Bakhtiar, Nor
Hayati Saad
Fakulti Kejuruteraan Mekanikal, Universiti Teknologi MARA,
Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
16
ICATeM 19
Lift and Drag Performances of O-Ring Paper Plane
N. I. Ismail1, Hamid Yusoff 1, Hazim Sharudin1, Arif Pahmi1, S.
Suhaimi2, Abdul Rahman Hemdi1 1Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Pulau Pinang, Malaysia 2Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Malaysia
ICATeM 21
Lift of Cambered Flapping Wing Inspired by Bats
Hamid Yusoff1, Noor Iswadi Ismail1, Solehuddin Shuib2, Muhad Rpzi
Mat Nawi2, Shafiq Suhaimi2 1Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Pulau Pinang, Malaysia 2Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Malaysia
ICATeM 23
Lift Generation of Compliant Wing Mechanism of Flapping Wing
H. Yusoff1, N. I. Ismail1, M. R. Rakmi1, S. Suhaimi2, W. Wisnoe3 1Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Pulau Pinang, Malaysia 2Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Malaysia 3Flight Technology & Test Centre (FTTC), Faculty of Mechanical
Engineering, Universiti Teknologi MARA, Malaysia
ICATeM 25
The Study of Water Media in Green Tower’s Solar Collector
Zainoor Hailmee Solihin, Wirachman Wisnoe, Ramlan Zailani, Noriah
Yusoff
Faculty of Mechanical Engineering, Universiti Teknologi Mara,
Malaysia
ICATeM 36
X-Type Tilted Quadrotor Flight Dynamic Modeling
W. Kuntjoro1,2, M. R. Abdullah3, R. E. M. Nasir1,2, J. Jaafar4 1Flight Technology and Test Centre, Faculty of Mechanical
Engineering, Universiti Teknologi MARA, Malaysia 2Aviation Technology Research, Universiti Teknologi MARA, Malaysia 3SIRIM Berhad, Bukit Jalil, Kuala Lumpur, Malaysia 4Faculty of Architecture, Planning, and Surveying, Universiti
Teknologi MARA, Malaysia
ICATeM 38
Aerodynamics of A Blended Wing Body Aircraft with Close-
Coupled Tail: Computational Fluid Dynamics Simulations of Two
Different Tail Sweep Angle Cases
Nur Azan Haiqal Mohamed Shafari, Rizal Effendy Mohd Nasir,
Mohamad Zulfazli Arief Abd Latif, M. Aiman Ahmad, Wirachman
Wisnoe, Wahyu Kuntjoro
Aviation Technology Research Group, Flight Technology & Test
Centre, Faculty of Mechanical Engineering, University Teknologi
MARA, Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
17
ICATeM 40
Air Traffic Controller Perception towards Air Traffic and
Taskload
S.M.B. Abdul Rahman1, M.F. Sidik2, F.N. Nazir2, M.S. Abu Jamil1 1Flight Technology & Test Centre, Faculty of Mechanical Engineering,
Universiti Teknologi MARA, Malaysia 2Kuala Lumpur Air Traffic Control Centre, Department of Civil
Aviation Malaysia, Subang, Malaysia
ICATeM 43
Multi-Configuration Stiffened Panels under Compressive Load:
Part 2 – Finite Element Analysis
Ramzyzan Ramly1, Amir Radzi Abdul Ghani2, Rizal Effendy Mohd
Nasir1, Zulkifli Mohamed3, Wahyu Kuntjoro1 1Flight technology & Test Centre (FTTC), Faculty of Mechanical
Engineering, Universiti Teknologi MARA, Malaysia 2Automotive Research & Test Centre (ARTeC), Faculty of Mechanical
Engineering, Universiti Teknologi MARA, Malaysia 3Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Malaysia
ICATeM 45
Numerical Calculation of Three Phase Flow (Gas – Solid – Liquid)
of Thermal Spray Process
Mohd Hafiz Bin Mohd Noh1, Naoki Sawada2, Koichi Mori3 1Faculty of Mechanical Engineering, University Technology MARA,
Malaysia 2Department of Aerospace Engineering, Nagoya University
ICATeM 49
Design and Analysis of a Formula SAE Car Engine Restrictor
Amir Radzi Ab. Ghani, M. Fitri Hassan, Ramzyzan Ramly
Faculty of Mechanical Engineering, Universiti Teknologi MARA
(UiTM), Malaysia
ICATeM 50
Velocity and Pressure Analysis in a Divergent Area Fitted with
Dimpled Hub
Ehan Sabah Shukri Askari1, Wirachman Wisnoe2 1Engineering Technical College-Baghdad, Middle Technical
University (MTU), Baghdad, Iraq 2Flight Technology and Test Centre (FTTC), Faculty of Mechanical
Engineering, Universiti Teknologi MARA (UiTM), Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
18
INTERNATIONAL CONFERENCE ON ROBOTICS & INTELLIGENT SYSTEM
2018 (ICRIS 2018)
BUNGA TANJUNG ROOM
10:30 – 12:45
Bunga Tanjung
Room
International Conference on Robotics and Intelligent System
(ICRIS2018)
Chairperson: Prof. Yoon Sang Kim
ICRIS 38
10:30 – 10:45
A Study on Photoneutrons Generated in A Linear Accelerator
Head Using GEANT4
Junho Ko and Yoon Sang Kim
Korea University of Technology and Education
ICRIS 11
10:45 – 11:00
A Study on The Effect of Local Neighbourhood Parameter
Towards The Performance of SAFIRO Algorithm
Tasiransurini Ab Rahman, Zuwairie Ibrahim, Nor Azlina Ab. Aziz,
Nor Hidayati Abdul Aziz, Suad Khairi Mohammed, Badaruddin
Muhammad and Zulkifli Md Yusof
Universiti Malaysia Pahang
ICRIS 07
11:00 – 11:15
Impedance Control Approach on Leg Motion Speed Variation on
Soft Surface Interaction
Wan Mohd Nafis Wan Lezaini, Addie Irawan and Akhtar Razul Razali
Universiti Malaysia Pahang
ICRIS 15
11:15 – 11:30
Extended-Based Fuzzy: Control Design of An Upper-Limb
Exoskeleton
Siti Khadijah Ali
Universiti Putra Malaysia
ICRIS 18
11:30 – 11:45
Mobile Robot Path Planning Using Q-Learning With Guided
Distance
Ee Soong Low, Pauline Ong and Cheng Yee Low
Universiti Tun Hussein Onn Malaysia
ICRIS 02
11:45 – 12:00
Kinect Structural Noise Elimination Technique for ITIS Mobile
Robot Data Collector
Aditya Kurniawan and Kholilatul Wardani
Politeknik Kota Malang
ICRIS 12
12:00 – 12:15
A Brief Survey on SLAM methods in Autonomous Vehicle
Talha Takleh Omar Takleh, Nordin Abu Bakar, Shuzlina Abdul
Rahman, Raseeda Hamzah and Zalilah Abd Aziz
Universiti Teknologi MARA
ICRIS 41
12:15 – 12:30
A Study on The Effect of Intelligent Speed Adaptation (Isa) By
Using Human Speech and Their Acceptance
Ahmad Khushairy Bin Makhtar
Universiti Teknologi MARA
ICATeM 2018, ICRIS 2018 & ICBME 2018
19
ICRIS 42
12:30 – 12:45
Two-Envelope System for Consultant Selection using Weighted
Sum Model
Mohd Faizal Omar
Universiti Utara Malaysia
14:00 – 16:00
Bunga Tanjung
Room
International Conference on Robotics and Intelligent System
(ICRIS2018)
Chairperson: Assoc. Prof. Zuwairie Ibrahim
ICRIS 10
14:00 – 14:15
Distance Evaluated Simulated Kalman Filter with State Encoding
for Combinatorial Optimization Problems
Zulkifli Md Yusof, Zuwairie Ibrahim, Asrul Adam, Kamil Zakhwan
Mohd Azmi, Tasiransurini Ab Rahman, Badaruddin Muhammad, Nor
Azlina Ab Aziz, Nor Hidayati Abd Aziz, Norrima Mokhtar, Mohd
Ibrahim Shapiai and Mohd Saberi Muhammad
Universiti Malaysia Pahang
ICRIS 13
14:15 – 14:30
Asynchronous Simulated Kalman Filter Optimization Algorithm
Nor Azlina Ab Aziz, Zuwairie Ibrahim, Nor Hidayati Abdul Aziz and
Tasiransurini Ab. Rahman
Universiti Malaysia Pahang
ICRIS 23
14:30 – 14:45
Effect of Fuzzy Logic based-Skyhook policy with Particle Swarm
Optimization for semi-active ride comfort
Mat Hussin Ab Talib, Intan Zaurah Mat Darus and Pakharuddin Mohd
Samin
Universiti Teknologi Malaysia
ICRIS 25
14:45 – 15:00
A simulated Kalman filter optimizer with white hole operator
Suad Khairi Mohammed, Badaruddin Muhammad, Nor Azlina Ab.
Aziz, Nor Hidayati Abdul Aziz, Tasiransurini Ab Rahman, Norazian
Subari and Zuwairie Ibrahim
Universiti Malaysia Pahang
ICRIS 32
15:00 – 15:15
An Improved Adaptive Extended Kalman Filter Algorithm of
SINS/GPS Loosely-coupled Integrated Navigation System Aditya
Yuyan Wang, Xiuyun Meng and Jilu Liu
Beijng Institute of Tehcnology
ICRIS 30
15:15 – 15:30
Operational Modal Analysis on a 3D Scaled Model of a 3-Storey
Aluminium Structure
M. Fadhil Shazmir, N. Ayuni Safari, Muhamad Azhan Anuar, Ahmad
Azlan Mat Isa and Zamri Abdul Rahman
Universiti Teknologi MARA
ICRIS 34
15:30 – 15:45
Conception of Logistics Management System for Smart Factory
Cheng Yee Low and Mohd Saiful Bahari Shaari
Universiti Tun Hussein Onn Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
20
ICRIS 26
15:45 – 16:00
Nonlinear Hysteresis Compensation via an Adaptive Extended
Discrete-Prescribed Performance Control
Mohd Hanif Mohd Ramli, Noor Ayuni Che Zakaria, Zulkifli Mohamed
and Mohd Azuwan Mat Dzahir
Universiti Teknologi MARA
16:15 – 18:00
Bunga Tanjung
Room
International Conference on Robotics and Intelligent System
(ICRIS2018)
Chairperson: Mohamad Dzulhelmy Amari
ICRIS 06
16:15 – 16:30
Optimization of Velocity Flap Structures in High Sensitivity
Macrofluidic Airflow Sensor
Mohamad Dzulhelmy Amari, Sukarnur Abdullah and Muhamad
Saifuddin Abdull Shukor
Universiti Teknologi MARA
ICRIS 17
16:30 – 16:45
Robotic Arm System with Computer Vision for Color Object
Sorting
Kok Meng Ong, Pauline Ong, Ee Soong Low and Chee Kiong Sia
Universiti Tun Hussein Onn Malaysia
ICRIS 20
16:45 – 17:00
Semantic Knowledge Base in Support of Activity Recognition in
Smart Home Environments
Abdul Syafiq Abdull Sukor, Ammar Zakaria, Norasmadi Abdul Rahim
and Rossi Setchi
University Malaysia Perlis
ICRIS 35
17:00 – 17:15
Feedback Effects for Epiduroscopy Education Based on Serious
Game
Seong-Wook Jang, Junho Ko, Yujin Choi and Yoon Sang Kim
Korea University of Technology and Education
ICRIS 36
17:15 – 17:30
A Study on Cybersickness Reduction Method Using Oculomotor
Exercise
Yeol Ho Kim, Junho Ko, Seong-Wook Jang, Kwang-Ho Seok,
Wookho Son and Yoon Sang Kim
Korea University of Technology and Education
ICRIS 27
17:30 – 17:45
Application of wavelet analysis in tool wear evaluation using image
processing method
Lee Woon Kiow, Syed Mohamad Aiman Tuan Muda, Ong Pauline and
Sia Chee Kiong
Universiti Tun Hussein Onn Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
21
POSTER PRESENTATION
BALLROOM FOYER
10:00-16:00
ICRIS 05
Athletes Tracking Using Homography Method: A Preliminary
Study
Khairul Imran Sainan, Mirwansah Mohamad, Zulkifli Mohamed,
Mohd Saiful Bahari Shaari and Muhd Faiz Mat
Universiti Teknologi MARA
ICRIS 14
Energy & Path Optimization of Robot Arm Simulator via Multi-
Objective Evolutionary Algorithm
Zulkifli Mohamed
Universiti Teknologi MARA
ICRIS 19 Development of Universal Wheelchair Transporter
Zulkifli Mohamed
Universiti Teknologi MARA
ICRIS 21
Integrity analysis of O&G standpipe separator : Numerical Study
Muhamed Faizal Hakim Hidzir, Khairul Imran Sainan and Hazran
Husain
Universiti Teknologi MARA
ICRIS 24
Modelling of Horizontal Flexible Plate Structure using Artificial
Bee Colony Algorithm
Muhamad Sukri Hadi and Intan Zaurah Mat Darus
Universiti Teknologi MARA
ICRIS 28 Performance Analysis of Solar Car Suspension System
Zulkifli Mohamed
Universiti Teknologi MARA
ICRIS 31
Simulation in Single and Multi-Flow Direction of Airflow Sensor
Sukarnur Abdullah, Amirul Shafiq Abdullah Sabil and Mohamad
Dzulhelmy Amari
Universiti Teknologi MARA
ICRIS 37 Tactile Sensor for Manipulation of Deformable Object
Muhammad Azmi Ayub and Abdullah
Universiti Teknologi MARA
ICRIS 40
Psychophysics Behavior of Human Tactile Mechanism to
Discriminate Extremely Thin Copper Foils
Mohammad Azzeim Mat Jusoh, Masahiro Ohka, Sukarnur Abdullah,
Hafizan Bin Hashim and Tetsu Miyaoka
Universiti Teknologi MARA
ICATeM 2018, ICRIS 2018 & ICBME 2018
22
INTERNATIONAL CONFERENCE ON BIOMECHANICS & MEDICAL
ENGINEERING 2018 (ICBME 2018)
BUNGA MELOR ROOM
10:30 – 11:45
Bunga Melor
Room
Session 1: Biomechanics I
Chairperson: Assoc. Prof Dr. Mohd Juzaila Abd Latif
Invited Speech
ICBME 25
10:30 – 10:45
Correlation of biomechanical properties and grayscale of articular
cartilage using low-field magnetic resonance imaging
Assoc. Prof Dr. Mohd Juzaila Abd Latif
Faculty of Mechanical Engineering, Universiti Teknikal Malaysia
Melaka.
ICBME 02
10:45 – 11:00
Knee and Hip Extension Responses to Prolonged Simulated Soccer
Match-Play: A 2D Study
Muhammad Hamdan1, Siti Norfariza Mohd Noh1, Wojciech
Stefaniak2 , Hosni Hasan1,3 , Hashbullah Ismail1,3, Raja Mohammed
Firhad Raja Azidin1,3 1Faculty of Sports Science and Recreation, Universiti Teknologi
MARA, 2Faculty of Physical Education and Physiotherapy, Opole University of
Technology, Poland 3National Football Academy UiTM-MOHE-FAM, Malaysia
ICBME 03
11:00 – 11:15
The Effect of Magnetic Induction Spectroscopy Signal for
Cylindrical Screw with Different Length
M. Amran1, R. Daud1 , Z. Zakaria1 , M.K. Ali Hassan1 , M. I. Omar2 ,
F. Mat1 1School of Mechatronic Engineering Universiti Malaysia Perlis
(UniMAP), 2University Health Center, Universiti Malaysia Perlis (UniMAP)
ICBME 05
11:15 – 11:30
Simplified Femoral Bone Model for Numerical Analysis of
Proximal Femur
M. H. Khan1, R. Daud1 , M. K. Ali Hassan1 , A. F. Azizan2
1 School of Mechatronic Engineering, Universiti Malaysia Perlis
(UniMAP) 2 Hospital Tuanku Fauziah, Kangar, Perlis, Malaysia
ICBME 23
11:30 – 11:45
Blood Flow Modelling to Improve Cardiovascular Diagnostics: A
Preliminary Review of 1-D Modelling
A. T. Butt, Y. A. Abakr, K. B. Mustapha
Department of Mechanical, Materials and Manufacturing Engineering,
University of Nottingham Malaysia Campus.
ICATeM 2018, ICRIS 2018 & ICBME 2018
23
11:45 – 13:00
Bunga Melor
Room
Session 2: Biomaterials I
Chairperson: Assoc. Prof Dr. Wan Mohd Nazri Wan Abdul Rahman
Invited Speech
ICBME 22
11:45 – 12:00
Oriented Strand Board Using Smaller Strand Size as a Core Layer
Assoc. Prof Dr. Wan Mohd Nazri Wan Abdul Rahman
Faculty of Applied Sciences, Universiti Teknologi MARA
ICBME 8
12:00 – 12:15
Microstructure and Bending Strength of Metallic Bone Staple
Nur Hidayatul Nadhirah Elmi Azham Shah, Muhammad Afiq Hanizar ,
Muhammad Hussain Ismail
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICBME 47
12:15 – 12:30
Quantifying and Comparing the Hyperelastic Properties of Skin,
Leather and Silicone
Zurri Adam Mohd Adnan, Mohd Azman Yahaya, Nor Fazli Adull
Manan and Jamaluddin Mahmud
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICBME 54
12:30 – 12:45
The effectiveness of different insole material in plantar pressure
reduction : a pilot study
Solehuddin Shuib1, Anis Salwa Ahmad1, Abdul Rahman Omar1,
Muhammad Faiz Borhanuddin1 and Shahfuan Hanif Ahmad Hamidi 2 1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2Fabrication and Joining Section, Universiti Kuala Lumpur, Malaysia
France Institute.
ICBME 62
12:45 – 13:00
Evaluation of the Performance of Natural Fiber Reinforced
Polymer Composites
Anizah Kalam, Fauziah Md Yusof, Muhammad Surahman Ramli and
Ibrahim Yuni
Faculty of Mechanical Engineering, Universiti Teknologi MARA
14:00– 16:00
Bunga Melor
Room
Session 3: Medical Engineering I Chairperson: Assoc. Prof Dr. Kahar Osman
Invited Speech
ICBME 26
14:00 – 14:15
Studies on the Spray Characteristics of Pressure-Swirl Atomizers
for Automatic Hand Sanitizer Application.
Assoc. Prof Dr. Kahar Osman
Universiti Teknologi Malaysia
ICBME 13
14:15 – 14:30
Tissue Differentiation by Refractive Index Using Fiber Optic Dis-
Placement Sensor
Rania Al-Ashwal, Amirul Ridhwan Sazali, Alex Lo Zhen Kai,
Mohamad Hafiz Mohamad Afandi, Muhammad Syafiq Mohd Najib,
Nurul Afiqah Fadzil and Syakirah Mohamed Amin
School of Biomedical Engineering and Health Sciences, Faculty of
Engineering, Universiti Teknologi Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
24
ICBME 39
14:30 – 14:45
Development and Evaluation of A Spot Sensor Glove for The
Tactile Prosthetic Hand
Mohammed Najeh Nemah1,2 , Cheng Yee Low1, Pauline Ong1 , Noor
Ayuni Che Zakaria3
1Faculty of Mechanical and Manufacturing Engineering, University
Tun Hussein Onn Malaysia, 2Engineering Technical College-Najaf, Al-Furat Al-Awsat Technical
University 3Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICBME 40
14:45 – 15:00
Mechanics of Total Ankle Replacement During Flexion in Relation
to Geometrical Design: A Finite Element Study
Muhammad Ajmal Mohd Taqayuddin , Mohd Afzan Mohd Anuar
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICBME 41
15:00 – 15:15
An Alternative Wavelength Range for Noninvasive Assessment of
Wound Tissue Oxygenation Status
Sheena P. Philimon, Audrey K. C. Huong , Xavier T. I. Ngu
Faculty of Electrical and Electronic Engineering University Tun
Hussein Onn Malaysia
ICBME 43
15:15 – 15:30
Design and Development Approach of Smart Glove for Post Stroke
Rehabilitation
Nurhazlinda Fariha Mohd Nawi1 , Audrey Huong Kah Ching1 ,
Nabilah Ibrahim1 , Wan Nur Hafsha Wan Kairuddin1 , Nur Anida
Jumadi1 , Raja Mohd Aizat Raja Izaham2 , Gan Hong-Seng3 , Wan
Mahani Hafizah Wan Mahmud1 1Faculty of Electrical and Electronic Engineering, Universiti Tun
Hussein Onn Malaysia, 2Kolej Kemahiran Tinggi MARA Ledang 3Universiti Kuala Lumpur, British Malaysian Institute
ICBME 44
15:30 – 15:45
Design and Analysis of Adjustable Ankle Foot Orthosis for
Cerebral Palsy Children
Eka Noorul Amanina Darwin1 , Giha Tardan2 and Abdul Halim
Abdullah1 1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2Department of Mechanical Engineering, Politeknik Sultan Salahuddin
Abdul Aziz Shah
ICBME 51
15: 45– 16:00
Nanoscale Zinc Hydroxyapatite Particles for Bone Tissue
Engineering
Noorainol Faiz Noor Haris, Mardziah Che Murad and Nik Rozlin Nik
Masdek
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICATeM 2018, ICRIS 2018 & ICBME 2018
25
16:15– 17:45
Bunga Melor
Room
Session 4: Biomaterials II Chairperson: Dr Munir Faraj Almbrouk Alkbir
Invited Speech
ICBME 18
16:15 – 16:30
Uncertainty Factors and Their Effects in Experimental Results of
Composite Structures
Dr Munir Faraj Almbrouk Alkbir
Faculty of Innovative Design and Technology, Universiti Sultan Zainal
Abidin
ICBME 19
16: 30– 16:45
Influence of Resin Content and Particle Size on Particleboard
From Leucaena Leucocephala
Nor Yuziah Mohd Yunus , Jamaludin Kasim , Zulhilmi Razali and
Wan Mohd Nazri Wan Abdul Rahman
Faculty of Applied Sciences, Universiti Teknologi MARA
ICBME 21
16:45– 17:00
The Effect of Surface Curvature on Biomechanical Properties
Characterization of Articular Cartilage
Yusra Liyana Jaafar1 , Mohd Juzaila Abd Latif1,2, Nur Hikmah
Hashim1 , Muhamad Noor Harun3 , Jamaluddin Mahmud4 1Faculty of Mechanical Engineering, Universiti Teknikal Malaysia
Melaka. 2Centre for Advanced Research on Energy (CARe), Universiti Teknikal
Malaysia Melaka. 3Faculty of Mechanical Engineering, Universiti Teknologi Malaysia. 4Faculty of Mechanical Engineering, Universiti Teknologi MARA.
ICBME 32
17:00– 17:15
The Characteristic of Cobalt-Nickel-Iron Alloy Coating Coated On
Aluminium, Brass and Stainless Steel
Nik Rozlin N.M Masdek1, Zuraidah Salleh1 , Muhammad Akmal Bin
Zamri1 , Md Zin Abu2 1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2AANS Technical and Services Sdn Bhd.
ICBME 64
17:15 – 17:30
Tactile Sensing Fingers Device Using Quantum Tunneling
Composite (QTC) Pills
Ahsana Aqilah Ahmad, Nur Izzah Lina Azaman , Muhammad Azmi
Ayub
Faculty of Mechanical Engineering, UiTM Shah Alam, Malaysia
PACIFIC BALLROOM
10:30 – 11:45
Pacific
Ballroom
Session 5: Biomechanics II Chairperson: Dr. Shahrul Azam Abdullah
Invited Speech
ICBME 48
10:30 – 10:45
Design of Thumb Exoskeleton Rehabilitation Device
Dr. Shahrul Azam Abdullah
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICATeM 2018, ICRIS 2018 & ICBME 2018
26
ICBME 12
10:45 – 11:00
The Development of Lower Limb Exoskeleton for Stroke Patients H.M. Desa1,2, M.I. Ideris1 , R. Jailani1, N.M. Tahir1 1Faculty of Electrical Engineering, Universiti Teknologi MARA 2UniKL British Malaysian Institute.
ICBME 28
11:00 – 11:15
Computational Analysis on Skull Fractures and Brain Injury using
Finite Element Analysis
Mohd Hazwan Mohamed Norli1 , Mohammad Al Faiz Hilmi Mohd Al
Zahari 2 , Shahrul Hisyam Marwan 4, Abdul Halim Abdullah 3 1Sultan Azlan Shah Polytechnic, 2Universiti Teknologi MARA, Shah Alam 3Universiti Teknologi MARA, Bukit Besi
ICBME 34
11:15 – 11:30
Effects of Screw and Plate Positions in the Dual Plating of Distal
Humerus Fixation
Luqman Hakim Noordin1 , Shahrul Hisyam Marwan2 , Abdul Halim
Abdullah1, 1Faculty of Mechanical Engineering Universiti Teknologi MARA
2Faculty of Mechanical Engineering Universiti Teknologi MARA,
Bukit Besi
ICBME 37
11:30 – 11:45
Electromyography Analysis of Lower Extremity Muscles During
Squat and Stoop Movement
Noor Ayuni Che Zakaria1, Muhammad Syukran Al-Baria Noor
Sazali1 , Nadia Mohd Mustafah2 , Aizreena Azaman3 1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2Faculty of Medicine, Universiti Teknologi MARA 3School of Biomedical Engineering and Health Science, Faculty of
Engineering, Universiti Teknologi Malaysia
11:45 – 13:00
Pacific
Ballroom
Session 6: Medical Engineering II Chairperson: Assoc. Prof Dr. Muhammad Hussain Ismail
Invited Speech
ICBME 09
11:45 – 12:00
Rheological Behaviour of Nickel -Titanium Powder Mixture
Feedstock Prepared by Dual Assymetric Centrifuge (DAC) Speed
Mixer
Assoc. Prof Dr. Muhammad Hussain Ismail
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICBME 04
12:00 – 12:15
Cardiac Seismocardiography (SCG) Analysis using Accelerometer:
A review
Ng Seng Hooi1 , Kamarulafizam Bin Ismail1,2, M. Mailah2 , Md
Rizman Md Lazim@Lazin3 1Centre for Biomedical Engineering, Institute of Human Centered
Engineering, UTM
2Department Applied Mechanics and Design, Faculty of Mechanical
Engineering, UTM
3Department of Physiology, Pusat Pengajian Sains Perubatan
(PPSM), Universiti Sains Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
27
ICBME 38
12:15 – 12:30
Profile of Blood Glucose and Insulin After Vitamin C and Vitamin
E Supplementation on Active Teenagers
Irfiansyah Irwadi1,3 , Hayuris Kinandita1 , Jamaluddin Mahmud2 , Lilik
Herawati1,3 1Department of Physiology, Faculty of Medicine, Universitas
Airlangga, Surabaya, Indonesia
2Faculty of Mechanical Engineering,Universiti Teknologi MARA
3 Sport Clinic, Faculty of Medicine, Universitas Airlangga and Dr
Soetomo Hospital, Surabaya, Indonesia
ICBME 55
12:30 – 12:45
Design and Simulation of MEMS Moisture Sensor Using COM-
SOL Multiphysics Software
Muhamad Nazrin Ismail , Noriah Yusoff, Nor Hayati Saad , Amirul
Abd Rashid
Faculty of Mechanical Engineering, UiTM Shah Alam, Malaysia
ICBME 24
12:45 – 13:00
Blood Flow Modelling to Improve Cardiovascular Diagnostics:
Application of a GTF to Predict Central Aortic Pressure using a 1-
D Model
A. T. Butt, Y. A. Abakr, K. B. Mustapha
Department of Mechanical, Materials and Manufacturing Engineering,
University of Nottingham Malaysia Campus
14:00– 16:00
Pacific
Ballroom
Session 7: Mechanics and Materials Chairperson: Dr. Hafizan Hashim
Invited Speech
ICBME 56
14:00 – 14:15
Theoretical Bending Collapse of Hat-Section Tubes
Dr. Hafizan Hashim
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICBME 14
14:15 – 14:30
Experimental Investigations on the Performance of a Single Slope
Solar Still Coupled with Shallow Solar Pond under Malaysian
Conditions
Kamarul Baharin Z. A., Safie M. A, Azmi A.M. , Singh B. S. B.
Faculty of Mechanical Engineering, UiTM Malaysia
ICBME 35
14:30 – 15:45
Low Grade Heat Power Generation using Thermoelectric
Generator
Khairunnissa Julaihie1, Raihan Abu Bakar1, Baljit Singh1, Muhammad
Fairuz Remeli1, Amandeep Oberoi2 1Faculty of Mechanical Engineering, UiTM Malaysia 2Thapar Institute of Engineering and Technology, Punjab, India.
ICBME 45
14:45 – 15:00
Comparative Analysis of Engineering and Art Learner’s Readiness
towards the use of E-Portfolio
Rosnadiah Bahsan1 and Syamsul Nor Azlan Mohamad2 1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2Faculty of Education, Universiti Teknologi MARA
ICATeM 2018, ICRIS 2018 & ICBME 2018
28
ICBME 49
15:00 – 15:15
Simple Progression Law in Predicting the Damage Onset and
Propagation in Composite Notched Laminates
Mohd Suhairil Meon1,2, Narasimha Rao Mekala2 , Kai-Uwe Schroeder2 1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2 Institute of Structural Mechanics and Lightweight Design, RWTH
Aachen University.
ICBME 59
15:15 – 15:30
Numerical Analysis of Sio2 Nanofluid Performance in Serpentine
PEMFC Cooling Plate
Irnie Azlin Zakaria1,Wan Ahmad Najmi Wan Mohamed1 , Wan Azmi
Wan Hamzah2 1Alternative Energy Research Centre (AERC), Faculty of Mechanical
Engineering, University Teknologi MARA 2Faculty of Mechanical Engineering, University Malaysia Pahang
ICBME 61
15:30 – 15:45
Modeling Analysis of Guided Ultrasonic Waves in Composite
Plates with Impact Damage
Noorfaten Asyikin Ibrahim and Bibi Intan Suraya Murat
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICBME 53
15:45– 16:00
Dynamic Stress Analysis of Skin and Synthetic Skin under Low
Impact Loading : A Review and Framework
Zurri Adam Mohd Adnan , Jamaluddin Mahmud, Mohd Azman
Yahaya
Faculty of Mechanical Engineering, Universiti Teknologi MARA
POSTER PRESENTATION
BALLROOM FOYER
10:00-16:00
ICBME 06
The synthesis of agar silicone biocomposite and its mechanical
properties
N.N. Azmi1, J. Mahmud 2,3 , M. J. Abd Latif 4
1Faculty of Mechanical Engineering, Universiti Teknologi MARA,
Pulau Pinang
2 Faculty of Mechanical Engineering, Universiti Teknologi MARA
Shah Alam
3Biomechanical and Clinical Engineering (BioMeC) Research Group,
Universiti Teknologi MARA
4 Faculty of Mechanical Engineering, Universiti Teknikal Malaysia
Melaka.
ICATeM 2018, ICRIS 2018 & ICBME 2018
29
ICBME 07
Effect of Ring Materials and Diameter on External Fixation
Stability
Nur Fatin Izzati Ibrahim1 , Ruslizam Daud1 , Muhammad Khairul Ali
Hassan1 , Noor Alia Md Zain2 , Nur Saifullah Kamaruddin1 , Asrul
Fahmi Azizan3 , Yazid Bajuri4
1Fracture and Damage Mechanics SIG, School of Mechatronic
Engineering, Universiti Malaysia Perlis (UniMAP)
2 Institute of Mathematics, Universiti Malaysia Perlis (UniMAP) 3Department of Orthopaeics and Traumatology, Hospital Tuanku
Fauziah, Kangar, Perlis
4Department of Orthopaedics and Traumatology, Faculty of Medicine,
Universiti Kebangsaan Malaysia Medical Centre
ICBME 10
Screw-bone implant loosening : complication, cause and
assessment
M. A Ghani, M. K. Ali Hassan , R. Daud
Fracture and Damage Mechanics (FDM) SIG, School of Mechatronic
Engineering, Universiti Malaysia Perlis (UniMAP)
ICBME 11
Stress Cracking Behavior of Interstitial Matrix and Cement Line
Interface Deflection
Raja Nor Syazwani Izzati Raja Ali1*, Ruslizam Daud1 , Muhammad
Khairul Ali Hassan1 , Noor Alia Md Zain2 , Nurul Najwa Mansor1
1Fracture and Damage Mechanic Research Group, School of
Mechatronic Engineering, Pauh Putra Campus, Universiti Malaysia
Perlis (UniMAP)
2 Institute of Engineering Mathematics, Universiti Malaysia Perlis
(UniMAP)
ICBME 20
Characterisation of Skin Biomechanical Properties via
ExperimentNumerical Integration
Nor Fazli Adull Manan1, Jamaluddin Mahmud1 and Linasuriani
Muhamad2
1Faculty of Mechanical Engineering. Universiti Teknologi MARA 2Centre for Renewable Energy. Universiti Tenaga Nasional
ICBME 29
Mechanical and Physical Properties of Kelempayan (Neolamarckia
cadamba) Particleboard
Wan Mohd Nazri Wan Abdul Rahman1 , Jamaludin Kasim1 and Nur
Sakinah Mohamed Tamat2
1Center of Wood Industries, Universiti Teknologi MARA. 2Faculty of Applied Sciences,Universiti Teknologi MARA.
ICBME 31
Multiple Angle of Bisector Rinn Holder for Oral X-Ray
Nik Amirul Khalid Bin Nik Dziauddin1, Nor Fazli Adull Manan1,
Mohd Yusmialdil Putera Mohd Yusof 2, Jamaluddin Mahmud1,
Shahrul Azam Abdullah1.
ICATeM 2018, ICRIS 2018 & ICBME 2018
30
1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2Faculty of Dentistry, Sungai Buloh Campus, Universiti Teknologi
MARA
ICBME 33
Electrodeposition of Co-Ni-Fe on Stainless Steel Bolts
M.S. Md.Nor1 , Z. Salleh1, N. R. N. M. Masdek3 , Y.M Taib4 , M.Z.
Abu2
1 Faculty of Mechanical Engineering, Universiti Teknologi MARA 2AANS Technical and Services Sdn Bhd.
ICBME 36
Innovation of New System Pf Water Supply for Wudhu
C.F Mat Taib , S.S Iqubal, Fauziah Md Yusoff
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICBME 46
Real-Time Measurement Ground Reaction Force For Motion
Control Of Active Ankle Foot Orthosis
Mohd Nor Azmi Ab Patar 1, Hokyoo Lee 3 , Azim Patar 2 , Muhammad
Azmi Ayub 1 , Aminuddin Hamid 1
1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2Department of Neurosciences, School of Medical Sciences, Universiti
Sains Malaysia
3Department of Mechanical and Control Engineering, Niigata
Institute of Technology, Japan
ICBME 50
Finite Element Analysis of Uncemented Total Hip Replacement:
The Effect of Bone-Implant Interface
Nur Faiqa Ismail1, Solehuddin Shuib1 , Muhd Azman Yahaya1 ,
Ahmad Zafir Romli2 , Amran Ahmed Shokri3
1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2 Institute of Science, Universiti Teknologi MARA 3School of Science Health, Universiti Sains Malaysia.
ICBME 52
Failure Analysis of Woven Kevlar/Epoxy under Uniaxial Tension
Norzihan Rahimi1 , Ahmad Kamil Hussain1 , Mohd Sultan Ibrahim
Shaik Dawood2, Adib Zulfadhli Mohd Alias1 , Muhamed Hafiy Afiq
Md Yusoff1 , Jamaluddin Mahmud1
1Faculty of Mechanical Engineering, Universiti Teknologi MARA. 2Department of Mechanical Engineering, International Islamic
University Malaysia
ICATeM 2018, ICRIS 2018 & ICBME 2018
31
ICBME 57
Development of a Quantitative Assessment System for Upper Limb
Motor Disorder in Occupational Therapy
Mohd Nor Azmi Ab Patar 1, Hokyoo Lee 2 , Jamaluddin Mahmud 1 ,
Azim Patar 3
1Faculty of Mechanical Engineering, Universiti Teknologi MARA 2Department of Mechanical and Control Engineering, Niigata Institute
of Technology, Japan
3Department of Neurosciences, School of Medical Sciences, Universiti
Sains Malaysia
ICBME 58
Quantifying Tensile Properties of Bamboo Silicone Biocomposite
using Yeoh Model
Kamarul Nizam Hassan1 , Jamaluddin Mahmud1, Anwar P.P. Abdul
Majeed2 , Mohd Azman Yahaya1
1Faculty of Mechanical Engineering, Universiti Teknologi MARA. 2Innovative Manufacturing, Mechatronics and Sports Laboratory,
Faculty of Manufacturing Engineering, Universiti Malaysia Pahang
ICBME 60
Rheological Behavior of ZirconiaToughened Alumina (ZTA) via
Ceramic Injection Moulding
Siti Norazlini Abd Aziz ,Wan Saiful Sarhan Wan Saidi , Mimi Azlina
Abu Bakar, Muhammad Hussain Ismail
Faculty of Mechanical Engineering, Universiti Teknologi MARA
ICBME 63
Biomorphic Silicon Carbide from Malaysian Hardwood
Noor Leha Abdul Rahman1, Koay Mei Hyie2, Anizah Kalam1 and
Fauziah Md Yusof1 1Faculty of Mechanical Engineering, Universiti Teknologi MARA Shah
Alam 2Faculty of Mechanical Engineering, Universiti Teknologi MARA
Pulau Pinang
ICBME 65
System Integration of Finger Contracture Prevention System
Device For Early Post Stroke Rehabilitation
Ahmad Faiz Ahmad Nazri1, Mohd Nor Azmi Ab Patar1, Hokyoo Lee2,
Jamaluddin Mahmud1 1Humanoid Robot and Bio-Sensing Center, Faculty of Mechanical
Engineering, Universiti Teknologi MARA, Malaysia 2Department of Mechanical and Control Engineering, Niigata Institute
of Technology, Japan
ICATeM 2018, ICRIS 2018 & ICBME 2018
32
ICATeM 2018 Committee
Honorary Chair
Prof. Ir. Dr. Muhammad Azmi Ayub Dean, Faculty of Mechanical Engineering,
Universiti Teknologi MARA, Malaysia
Conference Chair
Prof. Dr. Wirachman Wisnoe Universiti Teknologi MARA, Malaysia
Program Chairs
Dr. Wan Mazlina Wan Mohamed Universiti Teknologi MARA, Malaysia
Dr. Rizal Effendy Mohd. Nasir Universiti Teknologi MARA, Malaysia
Technical Chairs
Prof. Dr. Wahyu Kuntjoro Universiti Teknologi MARA, Malaysia
Dr. Siti Mariam Abdul Rahman Universiti Teknologi MARA, Malaysia
ICATeM 2018 Advisory Committee
Prof. Dr. Yulfian Aminanda International Islamic University Malaysia
Dr. Zulhilmy Sahwee UniKL - Malaysian Institute of Aviation
Technology, Malaysia
Dr. Omar Kassim Ariff University of Salford, UK
Prof. Dr. N. Yagnesh Sharma Manipal Institute of Technology, India
Prof. Dr. Essam E. Khalil Cairo University, Egypt
Prof. Ir. Dr. Mohd Zulkifly Abdullah Universiti Sains Malaysia
Prof. Dr. Hassan Bevrani University of Kurdistan, Iran
Assoc. Prof. Tiauw Hiong Go, Sc. D. Florida Institute of Technology, USA
Dr. Mohd Rashdan Saad Universiti Pertahanan Nasional Malaysia
Prof. Dr. Ir. Max Mulder Delft University of Technology, The
Netherlands
Dr. Nor Azlina Kamaruddin Civil Aviation Authority Malaysia
Prof. Ir. Dr. Shuhaimi Mansor Universiti Teknologi Malaysia
Prof. Dr. Ir. Hari Muhammad Institut Teknologi Bandung, Indonesia
Assoc. Prof. Dr. Cosmas Pandit Pagwiwoko University of Nottingham Malaysia Campus
Prof. Dr. Jieh-Shian Young National Changhua University of Education,
Taiwan
Dr. Fairuz Izzuddin Romli Universiti Putra Malaysia
Prof. Mohamed Abdellatif Future University in Egypt
Assoc. Prof. Gregory Sheard Monash University, Australia
Dr. Pierre Gajan ONERA - Centre de Toulouse, France
ICATeM 2018, ICRIS 2018 & ICBME 2018
33
ICBME 2018 Committee
Honorary Chair
Prof. Ir. Dr. Muhammad Azmi Ayub Dean, Faculty of Mechanical Engineering,
Universiti Teknologi MARA, Malaysia
Conference Chair
Assoc. Prof. Ir. Dr. Jamaluddin Mahmud Universiti Teknologi MARA, Malaysia
Program Chairs
Ts. Dr. Abdul Halim Abdullah Universiti Teknologi MARA, Malaysia
Dr. Nor Fazli Adull Manan Universiti Teknologi MARA, Malaysia
Technical Chairs
Dr. Mohd Nor Azmi Ab Patar
Dr Nik Rozlin Nik Mohd Masdek
Universiti Teknologi MARA, Malaysia
Universiti Teknologi MARA, Malaysia
ICBME 2018 National Committee
Assoc. Prof. Dr. Mohd Juzaila Abd Latif Universiti Teknikal Malaysia Melaka, Malaysia
Assoc. Prof. Ir. Dr. Ruslizam Daud Universiti Malaysia Perlis, Malaysia
Assoc. Prof. Dr. Kahar Osman Universiti Teknologi Malaysia
Assoc. Prof. Dr. Rozita Jailani Universiti Teknologi MARA, Malaysia
Assoc. Prof. Dr. Engku Fadzli Hasan Syed
Abdullah
Universiti Sultan Zainal Abidin, Malaysia
Assoc. Prof. Dr. Yousif Abdalla Abakr University of Nottingham, Malaysia
Assoc. Prof. Dr. Mohammad Shakir Nasif Universiti Teknologi PETRONAS, Malaysia
Assoc. Prof. Dr. Sazmal Effendi Arshad Universiti Malaysia Sabah, Malaysia
Dr. Ardiyansyah Syahrom
Sport Innovation and Technology Center,
Universiti Teknologi Malaysia, Malaysia
Dr. Ahmad Jazlan Haja Mohideen International Islamic University Malaysia
Dr. Mazatusziha Ahmad Universiti Tun Hussien Onn Malaysia
Dr. Munir Faraj Alkbir Universiti Sultan Zainal Abidin, Malaysia
Dr. Mohd Yusmiaidil Putera Mohd Yusof Universiti Teknologi MARA, Malaysia
Dr. Muhammad Fairuz Azmi Universiti Teknologi MARA, Malaysia
Dr. Mohd Sultan Ibrahim Shaik Dawood International Islamic University, Malaysia
Dr. Halikul Lenando Universiti Malaysia Sarawak, Malaysia
ICBME 2018 International Advisory Committee
Prof. Dr. Cathy A. Holt Cardiff University, United Kingdom
Prof. Dr. Shin-ichiroh Yamamoto Shibaura Institute of Technology, Japan
Prof. Dr. S. Darius Gnanaraj Karuya University, India
Assoc. Prof. Dr. Hokyoo Lee Niigata Institute of Technology, Japan
Assoc. Prof. Dr. Yongtao Lu Dalian University of Technology
Assoc. Prof. Dr. Kheng-Lim Goh Newcastle University, Singapore
Assoc. Prof. Dr. Ragab Kamal Abdel Magied Beni-Suef University, Egypt
Dr. Mahmoud Chizari Brunel University, United Kingdom
Dr. Mahdi A. Al Qahtani King Saud University, Saudi Arabia
Dr. Ahmed Imran Ajman University, UAE
Dr. Lilik Herawati Universitas Airlangga, Indonesia
Dr. June Madet Kenyatta University, Kenya
Dr Khurshid Alam Sultan Qaboos University, Sultanate of Oman
ICATeM 2018, ICRIS 2018 & ICBME 2018
34
ICRIS 2018 Committee
Honorary Chair
Prof. Ir. Dr. Muhammad Azmi Ayub Dean, Faculty of Mechanical Engineering,
Universiti Teknologi MARA, Malaysia
Conference Chair
Dr. Sukarnur C. Abdullah Universiti Teknologi MARA, Malaysia
Program Chairs
Mohd Saiful Bahari Shaari Universiti Teknologi MARA, Malaysia
Technical Chairs
Dr. Muhamad Sukri Hadi Universiti Teknologi MARA, Malaysia
Dr. Mohammad Azzeim Mat Jusoh Universiti Teknologi MARA, Malaysia
Khairul Imran Sainan Universiti Teknologi MARA, Malaysia
ICRIS 2018 Advisory Committee
Prof. Masahiro Ohka Nagoya University, Japan
Assoc. Prof. Dr. Intan Zaurah Mat Darus Universiti Teknologi Malaysia
Assoc. Prof. Dr. Hanafiah Yussof Universiti Teknologi MARA, Malaysia
Secretariat, Treasurer, Technical and Logistics Committee
Secretariat
Nor Hana Nasrudin
Fazilon Baadari
Izan Sufinah Mat Tohid
Treasurer
Dr. Zuraidah Salleh
Technical and Logistics
Ts. Ameran Sainan
Mohamad Suhairi Zainudin
Mohamad Asrul Mahamad Razali
Mohd Helmi Mohd Mustamil
ICATeM 2018, ICRIS 2018 & ICBME 2018
35
NOTES