66
E1 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required. www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions. KELVIN ® EDUCATIONAL ELECTRONICS SOLDERING LABS O R IG I N AL I DE A S F R O M KELVIN ® Introduction to Soldering Lab With this hands-on soldering lab, yourstudents will learn how to identify components, color-code the resistor values, recognize the component's polarity, mount the components, tin & strip wire, solder correctly and troubleshoot their finished circuits. Grades 7-12. Lab includes: Soldering Kit (soldering iron, [3] copper tips, 40/60 solder, soldering aid and instructions) Solder Iron Stand and Sponge Heat Sink Screwdrivers Mini Diagonal Cutter Long Nose Pliers Wire Stripper Vacuum Desoldering Pump Desoldering Wick Safety Goggles Helping Hand PC Board Holder Soldering Manual How to Solder Video [40] Solder Practice Kits [6] Surface Mount Technology Kits Workstation Sign Lab includes: Circuit Wizard software (circuit and PCB design) Soldering Kit (soldering iron, 3 copper tips, 40/60 solder, soldering aid and instructions) Toner Transfer System Thermal Transfer System Etching Tank Consumables: Copper Clad PC Board, Etch Resist Ink Pen, Dry Transfer Set (Donuts, Tape, Titles), Dry Etchant Book: Making PC Boards Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand PCB Holder, Plastic Tray, PC Board Tongs Plus, Lesson Guide & Workstation Sign KELVIN ® PC Board Fabrication and Soldering Lab With this lab, students will learn how to layout components, create and drill a PC board, and solder components in place. This start-up package includes KELVIN® Printed Circuit Board Layout software that makes it possible for students to lay out circuits. Hands-on activities include etching a PC board (with teacher supervision). Recommended for Grades 7-12 with supervision. Ideal for a Soldering Station! KELVIN ® Soldering Practice Lab Students can gain valuable hands-on experience with soldering and PC board assembly as they complete a solder practice kit. Lab includes: [2] KELVIN® 50LE Multimeters, [2] Tool Kits, and [10] Solder Practice Kits (five different ones). Grades 7-12. 841259 Lab - ....................................................................................................................................$199.95 841149 Introduction to Soldering Lab ....................................................................$695 840789 PC Board Fabrication and Soldering Lab ....................................................$1,795

Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

  • Upload
    others

  • View
    11

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E1Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSSOLDERING LABSORIGINAL IDEAS FROM

KELVIN® Introduction to Soldering LabWith this hands-on soldering lab, yourstudents will learn how to identifycomponents, color-code the resistor values, recognize the component's polarity,mount the components, tin & strip wire, solder correctly and troubleshoot theirfinished circuits. Grades 7-12.

Lab includes:• Soldering Kit (soldering iron, [3] copper tips, 40/60 solder, soldering aid and instructions)• Solder Iron Stand and Sponge• Heat Sink• Screwdrivers• Mini Diagonal Cutter• Long Nose Pliers• Wire Stripper

• Vacuum Desoldering Pump• Desoldering Wick• Safety Goggles• Helping Hand PC Board Holder• Soldering Manual• How to Solder Video • [40] Solder Practice Kits• [6] Surface Mount Technology

Kits• Workstation Sign

Lab includes:• Circuit Wizard software

(circuit and PCB design)• Soldering Kit (soldering iron,

3 copper tips, 40/60 solder,soldering aid and instructions)

• Toner Transfer System• Thermal Transfer System• Etching Tank

Consumables: Copper Clad PCBoard, Etch Resist Ink Pen, DryTransfer Set (Donuts, Tape, Titles),Dry Etchant Book: Making PC BoardsTools: Hand Tools, Mini Drill (withstand and bits), Safety Glasses,Gloves, Helping Hand PCB Holder,Plastic Tray, PC Board Tongs Plus, Lesson Guide & Workstation Sign

KELVIN® PC Board Fabrication and Soldering LabWith this lab, students will learn how to layout components, create and drill aPC board, and solder components in place. This start-up package includesKELVIN® Printed Circuit Board Layout software that makes it possible forstudents to lay out circuits. Hands-on activities include etching a PC board (withteacher supervision). Recommended for Grades 7-12 with supervision.

Ideal for a Soldering Station!

KELVIN® Soldering Practice Lab Students can gain valuable hands-on experience with soldering and PC board assembly as they complete asolder practice kit. Lab includes: [2] KELVIN® 50LE Multimeters, [2] Tool Kits, and [10] Solder Practice Kits(five different ones). Grades 7-12.841259 Lab - ....................................................................................................................................$199.95

841149 Introduction to Soldering Lab ....................................................................$695840789 PC Board Fabrication and Soldering Lab....................................................$1,795

Page 2: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E2 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS CURRICULUM ORIGINAL IDEAS FROM

2www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.KELVIN® Electronics Kits, Labs and Trainers may require soldering, hand tools and advanced assembly. Adult supervision required.

KELVIN® ECONOMICAL ELECTRONIC KITS KELVIN® EDUCATIONAL

Kit, 841123,$3.95 or $2.95 ea./10+Bulk Pack for 30,842162, $58.50Assemb. Demo,842163, $49.95

Blinking LEDsDemonstrates how to blink two LEDswith many common electronic parts.Requires a 9V battery.

$195Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841134,$3.95 or $2.95 ea./10+Bulk Pack for 30,842191, $82.50Assemb. Demo,842192, $49.95

Reaction TesterAnticipate when the LED will lightand release the switch. Stays lit upwhen right. Requires a 9V battery.

Kit, 841131,$3.95 or $2.95 ea./10+Bulk Pack for 30,842193, $82.50Assemb. Demo,842194, $49.95

Decision MakerGreat for making any “YES,” “NO,”or “Heads or Tails” decisions.Requires a 9V battery.

Kit, 841130,$7.95 or $6.95 ea./10+Bulk Pack for 20,842223, $120Assemb. Demo,842160, $49.95

Touch Control CircuitActivates a relay just by touching theON probe. Requires a 9V battery.Enclosure not included.

$600Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 842141,$4.95 or $4.45 ea./10+ or $3.95 ea./20+Bulk Pack for 30,842142, $99.00

Night LightA photocell turns on/off a superbright LED as the room darkens orlightens. Requires [2] AA batteries.

$330Bulk Pack Prices

As Low As

Per EachStudent

Kit

Bulk Pack of 25 Kits,842037, $73.75Assemb. Demo,842259, $39.95

Mini LED FlashlightDesign, assemble and test a keychainflashlight with a super bright LED.Requires a heat gun.

$295Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841568,$9.95 or$8.95 ea./10+Bulk Pack for 10,842250, $79.95Assemb. Demo,842196, $59.95

Kel-Number PickerSelect numbers from 0-9. Push thebutton and the 7-seg. display willshow. Requires a 9V battery.

$799Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841129,$9.95 or $8.95 ea./10+Bulk Pack for 20,842224, $149Assemb. Demo,842161, $59.95

Light Activated CircuitLight triggers a relay for an alarm or robot. Requires a 9V battery.Enclosure not included.

$745Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841124,$9.95 or $8.95 ea./10+Bulk Pack for 20,842225, $149Assemb. Demo,842164, $49.95

Micro-Mazer™Blinking LED eyes and a jumbo LEDgives this kit a ‘robotic face’. Requiresa 9V battery.

$745Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841126,$9.95 or $8.95 ea./10+Bulk Pack for 20,842234, $149Assemb. Demo,842173, $59.95

Water Level MeterA great tool to determine the liquidlevel in a container. Requires a 9Vbattery.

$745Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841569,$9.95 or $8.95 ea./10+Bulk Pack for 20,842248, $149Assemb. Demo,842195, $59.95

Kel-Decision StickPush the button to display theanswers to all of your questions.Requires a 9V battery.

$745Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841132,$9.95 or $8.95 ea./10+Bulk Pack for 20,842235, $149Assemb. Demo,842175, $59.95

Moisture SensorCheck the soil moisture of plantswith probes and keep them alive.Requires a 9V battery.

$745Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841572,$10.95 or$9.95 ea./10+Bulk Pack for 10,842251, $89Assemb. Demo,842197, $59.95

Kel-Wheel of FortunePush the button and see 10 LEDsappear to spin around the wheelRequires a 9V battery.

$890Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841127,$13.95 or $12.95 ea./10+Bulk Pack for 10,842232, $120Assemb. Demo,842170, $59.95

Audio Level MeterUses an LM3915 Bar Graph IC andaudio pre-amp to measure an audiolevel . Requires a 9V battery.

$12Bulk Pack Prices

As Low As

Per EachStudent

Kit

PROJECT LEAD THE WAY

$275Bulk Pack Prices

As Low As

Per EachStudent

Kit$275Bulk Pack

Prices As Low As

Per EachStudent

Kit

Continuity TestersA great tool to test forcontinuity in a circuit. All three kits require a 9V battery.

LED Light OnlyBulk Pack for 30, 842407, $88.50

Mechanical Buzzerwith LED LightBulk Pack for 20,

842405, $73

Electric Buzzer with LED Light

Kit, 841241, $6.45 or $5.95 ea./10+

Bulk Pack for 20, 842233, $99.95

Ass. Demo, 842172, $59.95As Low As $4.99 per Kit

$365As Low As

Per Student

$295As Low As

Per Student

Page 3: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E3Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSCURRICULUMORIGINAL IDEAS FROM

3www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL KELVIN® ECONOMICAL ELECTRONIC KITS

KELVIN® Electronics Kits, Labs and Trainers may require soldering, hand tools and advanced assembly. Adult supervision required.

Kit, 841128,$9.95 or $8.95 ea./10+Bulk Pack for 10,842226, $84.95Assemb. Demo,842165, $59.95

Sound Activated CircuitUsing sound or voice, a relay isenergized. Increase or decrease thesensitivity. Requires a 9V battery.

$849Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841591, $9.75or $9.45 ea./10+Bulk Pack for 10,842230, $85Assemb. Demo,842169, $59.95

Temp. Control CircuitThermostat with range of 41° F –86°F. High power load control with30 second hysteresis. Requires a 9Vbattery. Enclosure not included.

$850Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841596,$9.95 or $8.95 ea./10+Bulk Pack for 10,842228, $78.95Assemb. Demo,842167, $59.95

Bicycle Safety LightConnect to your bicycle for safety.Requires [2] AA batteries. Enclosurenot included.

$789Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 840556,$12.95 or $9.95 ea./10+Bulk Pack for 10,842229, $79.95Assemb. Demo,842168, $69.95

Hollywood Marquee Includes a PC board, parts andinstructions. Requires a 9V battery.Enclosure not included.

$799Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 840662,$16.95 or$15.95 ea./10+Bulk Pack for 10,842231, $135Assemb. Demo,842170, $59.95

Strobe LightControls flash rate. Includes pre-drilled PC board, parts andinstructions. Requires a 9V battery.

$1350Bulk Pack Prices

As Low As

Per EachStudent

Kit

Bulk Pack for 10,842243, $79.95Assemb. Demo,842186, $59.95

Telephone BugTransmit phone conversations to anFM radio. Requires a transistor radio& 9V battery.

$799Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841594,$12.75 or$11.95 ea./10+Bulk Pack of 10,842241, $99.95Assemb. Demo,842184, $69.95

Metal Stud FinderDetects metal studs behind a wall.Requires a 9V battery. Requires a 9Vbattery. Enclosure not included.

$999Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841598,$10.95 or$9.95 ea./10+Bulk Pack for 10,842239, $87.95Assemb. Demo,842182, $69.95

Big EarBuild an ultra sensitive listeningdevice. Use a funnel or build areflective parabolic dish. Requires a9V battery. Enclosure not included.

$880Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 840557,$11.95 or$10.95 ea./10+Bulk Pack for 10,842244, $99.95Assemb. Demo,842187, $69.95

KGB EarListen to a clear broadcast over 100ft. away by using any FM radio.Requires a 9V battery and FM Radio.

$999Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841595,$11.95 or$10.95 ea./10+Bulk Pack for 10,842240, $99.95Assemb. Demo,842183, $69.95

Metal DetectorDetect metal objects in or behindsurfaces. Sensor mounted on a woodstick to avoid interference. Requiresa 9V battery. Enclosure not included.

$999Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841567,$5.75 or$4.95 ea./10+Bulk Pack for 20,842245, $87.95Assemb. Demo,842189, $59.95

Police SirenMimics a police car siren with toneadjustment. Can also be used as aburglar alarm. Requires a 9V battery.

$440Bulk Pack Prices

As Low As

Per EachStudent

Kit

Sound Effects UnitMake four different sound effects;from a Laser Gun to Police Siren.Requires a 9V battery. Enclosure notincluded.

$1120Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841597,$14.95 or$12.95 ea./10+Bulk Pack for 10,842246, $111.95Assemb. Demo,842188, $59.95

Kit, 841034, $39.95Assemb. Demo, 842180, $69.95

2-Way Intercom Kit with Communication LabIncludes a pair of high qualityintercoms, project boxes, one pair ofwires and batteries.

$3995Bulk Pack Prices

As Low As

Per EachStudent

Kit

Kit, 841599, $19.95 or $17.95 ea./10+Bulk Pack for 10, 842238, $159.95Assemb. Demo, 842181, $69.95

Wireless MicrophoneTransmit your voice to anyFM radio up to 100 feetaway. Includes housingmade from a PVC pipe.Requires a 9V battery.

$1599Bulk Pack Prices

As Low As

Per EachStudent

Kit

Booster Audio Amplifier Amplify music from any audio signalup to 1W. Relays to incl. speaker withvolume control. Req. a 9V battery. 841133 Kit $5.45 or $4.45 ea./10+842236 Bulk Pack for 20 ........$87.95842177 Assemb. Demo ..........$59.95

KELVIN®

20W Audio Amplifier Amplify any small signal and drivean 8 ohm speaker with 1% THD.Requires a 12-30 V DC power supply.841570, Kit, $15.95 or $14.95 ea./10+842237 Bulk Pack for 10 ............$125842178 Assemb. Demo ..........$69.95

Page 4: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E4 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALKITS

Interval TimerFor intermittent operation of circuits and equipment. Output relay with dry switch-over contact. Adjustable pulse andpause times. 100 mA. 1.6 x 3.4 in.Requires 12V DC with adapter.282307 Kit ....$8.95 or $7.95 ea./3+KELVIN® Speed Control

Use Pulse-Width Modulation (PWM)to vary the speed of a DC motor from0 to 100%. Can be used for any DCmotors from 3 to 25 Volt with 3 Ampmaximum current draw. It is ideal tocontrol the speed of a fan, toy motor,model train and so on.841732 Kit..$15.95 or $14.95 ea./10+842227 Bulk Pack for 10 ............$125842166 Assemb. Demo ..........$69.95

KELVIN® Kel-Function Frequency GeneratorReal test equipment for an electronictechnician or hobbyist. Produces sine,triangle and square waveforms withfrequency range between 100Hz to100KHz. Includes an amplitudeadjustment. Requires a 9V battery.Does not include enclosure, use#430202.841571 Kit..$12.75 or $12.45 ea./10+842176 Assemb. Demo ..........$69.95

KELVIN®

Dual Power SupplyThis kit contains all parts necessaryto build a dual adjustable powersupply to power your projects.Outputs positive-negative voltagesfrom +/-1.25 to +/-15VDC at 700mAper supply. Requires wall adapter,use #220136.841590 Kit..$23.95 or $22.45 ea./10+842174 Assemb. Demo ..........$79.95

Kitchen Timer1 minute to 1 hour. One button operation. Clear 16-led readout. Audible and visible alarmwith discrete pre-alarm. Auto power-off. Attractive designer enclosure.micro-controller technology. 10mA.Requires AAA batteries.282322 Kit..$19.95 or $18.95 ea./3+

Mini FM Oscillator 100-108 MHz. Features an integrated pre-amplifier that can be connected to any source. Ideal for avariety of amplifying uses. Comeswith PC board, parts and manual.Requires a 9V DC battery.282081 Kit..$19.95 or $18.95 ea./3+

IR Remote CheckerCheck your IR remote for proper operation. Simple operation: point the remote at the sensor and push any button. With 4 flashing leds indicate remoteoperation. 2.2 x 1.2 x 1.3 in. Requiresa 9V DC battery.282331 Kit ....$8.95 or $7.95 ea./3+

Cable Polarity CheckerLED indication for open circuit, shortsand polarity. 2.2 x 1.6 x 1.3. Requiresa 9V DC battery.282326 Kit ....$9.95 or $9.45 ea./3+

ThermostatA general purpose, low-cost thermostat with NTCtemperature sensor. Output relay

with an LED-indicator. Temperaturerange: +5°C to +30°C approx. (41°Fto 86°F). 3A. 2.1 x 2.4 x 1.1 in.Requires 12V DC with adapter.282332 Kit ....$9.95 or $9.25 ea./3+

Multifunctional Clock Time, Date, Temperature, Count;Chronometer with lap; Countdown;Scoreboard; Random numbergenerator; Chime beep; Relay output;US or Europe display. Wirelessremote. Requires a 9V DC battery. 282086 Kit ......$125 or $105 ea./3+

Love TesterEach partner holds an end, then joinhands, watch the 10-LED readoutplus audible indication. 4.1 x 3.1 x0.98 in. Requires a 9V DC battery.282340 Kit..$19.95 or $18.95 ea./3+

Mini SMD Flashing Heart6 flashing LEDs. Use as a necklaceor a pin. 5mA. 1.9 x 1.7 x 0.3 in.Requires a 3V Lithium button battery. 282336 Kit..$12.95 or $11.95 ea./3+

Electronic CricketAutomatically comes on when it gets dark. Cricket repetition (time between two crickets), effect and tone adjustable. Adjustable light sensitivity. 2.4 x 0.4 x 1.0 in. 282300 Kit ....$9.95 or $8.95 ea./3+

One-Button Bandit KitPress the button and away it goes!If the 3 LEDs light, you win! The kitincludes a PC Board, parts and adetailed instruction book. 840258.....$14.95 or $13.95 ea./10+

Digital Roulette KitThe Digital Roulette will be a surewinner with you, your friends andyour relatives. {32} LEDs are arrangedin a 5-in. diameter circle. 282429...$16.95 or $15.95 ea./10+

Magic MessageThe message seems to float in the air withhigh intensity red LEDs.. Use the built-in messages or enter yourown 7-character message. Lowpower. Auto off. Requires AAAbatteries. 6.4 x 1 x 0.9 in.282343 Kit..$18.95 or $17.95 ea./3+

Flashing LED SweetheartShow your love in an original way that your heart still beats fast for them. 28 LEDs form two fastblinking hearts. 2.4 x 2.4 x 1.2 in.Requires a 9V DC battery.282297 Kit ....$9.95 or $8.95 ea./3+

Page 5: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E5Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL RADIO KITS

AM/FM Radio Kit with Transistor & IC“Superheterodyne” designed to receive standard AM (amplitude modulation) and FM (frequency modulation)broadcast frequencies. Includes [7] transistors, [2] diodes, IC, and a radio mounting stand. The PC Board measures5-1/4 in. H x 11-5/8 in. W. Requires Soldering and a 9V DC Battery.842313 Kit ..........................................................................................................................$29.95 or $28.95 ea./6+

Crystal Radio Bulk PackUnique flat design that can be made to look like apostcard. The radio is assembled by soldering 2components on to a pc board. The coil is ‘printed’ on theboard and tuning is done by moving a metal plate overthe coil. Includes crystal earpiece & aerial wire. Self-adhesive postcard graphics are also supplied.283701 Bulk Pack for 10 ..................................$149.95

KELVIN® BoosterAudio AmplifierAmplify music from a CD player or anyaudio signal up to 1W. Relays it to aspeaker with volume control (speakerincluded). Requires a 9V battery. 841133 Kit ..$5.45 or $4.45 ea./10+842236 Bulk Pack for 20 ........$87.95842177 Assemb. Demo ..........$59.95

KELVIN®

20W Audio Amplifier Amplify any small signal and drivean 8 ohm speaker with 1% THD.Requires a 12-30 V DC power supply.841570 Kit..$15.95 or $14.95 ea./10+842237 Bulk Pack for 10 ............$125842178 Assemb. Demo ..........$69.95

KELVIN®

20W+20W Stereo Audio AmplifierHigh quality; uses an LM1875 toamplify any small signal and to drivean 8 ohm speaker with 1% THD.Requires 12-30 V DC power supply.841593, Kit, $21.95 or $20.95 ea./10+842179 Assemb. Demo ..........$69.95

Mini Phono Amplifier 1W phono amp packs a lot of power.Includes a power transformer. 840018 Kit.$16.95 or $15.95 ea./10+842261 Assemb. Demo ........$69.95

AM Radio KitsEasy-to-build, complete radio on a single printed circuitboard. Unique design allows you to place parts over itscorresponding symbol on the PC board. Teaches the basictheory of AM radio operation. Detailed instructions andillustrations make it an educationally sound project.Requires soldering and a 9V Battery.280642 Kit with 2 ICs ..............$13.95 or $12.95 ea./6+840262 Kit ..............................$19.95 or $18.95 ea./6+

Telephone Kit (No Soldering) w/ Training CourseBuild a pushbutton telephone equipped with the followingfeatures: Pulse/tone dialing, automatic redial, a ringer turn offswitch, [4] neon bulbs for visual ringing indicator, and a clearsee-through case to show the total inner workings of the phone.Clear see-through case and wall mounting cradle included. 280111 Kit ..........................................$29.95 or $26.95 ea./3+

Telephone Hold Button KitCreate a hold button for your phone line. Kit includes a PC board,parts and instructions.840243 ......................................$9.95 or $8.95 ea./10+

Page 6: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E6 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS KITS3D Christmas Tree16 flashing red LEDs. Extra green & yellow LEDs provided to customize your tree can be hung and supplied through the wires. 8mA. 3.1 x 3.5 x 4 in. Requires a 9V battery or 12V DC. 282324 Kit ....$9.95 or $9.45 ea./3+

Deluxe Xmas TreeA beautiful “tree” consisting of 134 LEDs. 18 randomly blinking candles. An on/off switch is also included. 5.6 x 3.2 in. Requires a 9V battery or 12V DC. 282312 Kit....$24.95 or $23.95 ea./3+

83 LED Animated BellNo need to remove thebattery when using external supply. 12V DC operation possiblefor use in cars or trucks. On/offswitch included. Requires a 9Vbattery or 12V DC. 282316 Kit....$19.95 or $18.95 ea./3+

Brain GameRepeat a random pattern. 4 LEDs and 4 pushbuttons provide hours of fun. Low power consumption. Micro-processor controlled. Autopower off. 2 x 2.6 in. Requires AAAbatteries.282080 Kit....$14.95 or $13.95 ea./3+

Wheel of Fortune10-LED wheel of fortune. Push the button to start spinning action. When it stops, one LED remains lit. Auto Off. Low poweruse. 2.6 x 1.3 in. Requires a 9Vbattery or 12V DC.282342 Kit ....$9.95 or $8.95 ea./3+

Roulette37 LEDs and spinning sound. Sounds ‘Winner’-tune for each color. Also spins LEDs between games. Kit includes pushbutton operation.Microprocessor. Auto Off. 3.6 x 1.3in. Requires ‘AA’ batteries.282314 Kit..$19.95 or $18.95 ea./10+

Riding Santa126 animated, multicolor LEDs.Includes power switch. 3.2 x 5.7 in.Requires a 9V battery or 12V DC. 282311 Kit..$24.95 or $23.65 ea./10+

Classic NTSC TV Game1-2 players. 4 levels of difficulty. Audio/Video output, adjustable brightness, auto power off. Measures2.9 x 5.5 in. Requires AAA batteries.282344 Kit..$21.95 or $20.95 ea./10+

Shaking DiceNo push buttons required, just give it a shake. Rolls out slowly and flashes last combination. Auto power-off. Microprocessor-controlled. 1.4 x 1.4 x 1.3 in. Requiresa 3V Lithium button battery.282341 Kit..$15.95 or $14.95 ea./10+

Dual Electronic Dice Have no doubt about the displayed results of this electronic dice! Comes with PC board, parts and manual. Requires a 9V DC battery.282084 Kit..$19.75 or $18.95 ea./10+

Siren Sound GeneratorGenerates fourdifferent sounds: police siren, fire brigade, emergency vehicle plus a machine gun. RV1 adjusts soundpitch. On/off switch and PCBspeaker included. 2.4 x 1.6 in.Requires a 9V DC battery. 282308 Kit..$13.75 or $12.95 ea./10+

Steam Engine WhistleSound Generator Generates sound of a vintage steam engine. Adjustable ‘speed’ and volume. Comes with 8 ohm,5W miniature speaker. 3.9 x 3.3 in.Requires a 9V DC battery. 282328 Kit..$12.95 or $11.95 ea./10+

Super Stereo EarStereo audio amplifier boosts sound 50 times. Great for the hearing impaired, as a gadget, science project, etc. With volume control and on/offswitch. 2.4 x 2.1 x 1.7 in. Requires12V DC with adapter. 282330 Kit..$13.75 or $12.95 ea./10+

Telephone Amplifier Use either as an stand-alone amplifier with loudspeaker to follow a telephone conversationor connect it to an amplifier on amixing panel. Comes with a PCboard, parts and manual. Requiresa 9V DC battery.282083 Kit..$16.95 or $15.95 ea./10+

Electronic Recording andPlayback Module KitRecords a few lines of speech to playover and over again when triggered.Requires a 9V DC battery. 282085 Kit..$39.95 or $37.95 ea./10+

Quiz TableUp to 4 players. Daisy-chain two unitsfor 8 players! LED indicates firstbutton pushed. 4.3 x 3.1 x 1.1 in.Requires 9V DC battery.282327 Kit..$14.95 or $13.95 ea./10+

Electronic Christmas TreeChristmas was never so congenial! 16 blinking LEDs. Measures2.4 x 4 x1 in. Requires a 9V battery. 282296 Kit......$10.95 or $9.95 ea./3+

Sound Generator Sounds include: machine gun, police sirens, phasor, engine, tire screech,explosion, mortar shot, "WildCharge” tune, and "SnakeCharmers” tune. Adjustable speed.Requires a 9V DC battery.282087 Kit..$33.95 or $31.95 ea./10+

Electronic DiceElectronic die with an LEDindication. Rolls slowly out when the push button is released. 1.7 x2.4 in. Requires a 9V battery.282305 Kit..$10.75 or $9.95 ea./10+

Page 7: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E7Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSKITSSound to Light UnitFour high-intensity LEDs light up and react with every sound. Adjustable sensitivity with potentiometer. Built-in mic. 0.5mA-12mA. 1.6 x 2.2 x 1.4 in. Requiresa 9V DC battery.282299 Kit ....$9.75 or $8.95 ea./3+

Dual SuperbrightFlashing Red LED LightsVery powerful flash effect. For warning signs, as eye-catcher,alarm, etc. Auto turn on at dark mode with adjustable sensitivity. 2.2 x 1.3 x 1.6 in. Requires a 9V battery or 12V DC.282339 Kit ....$7.95 or $7.45 ea./3+

Dual White LEDStroboscopeTwo super bright white LEDs. Powerful flash effect. Great for parties, attention grabber, etc. Slow & fast selector and speed adjust trimmer. Includes powerswitch. 2.2 x 1.3 x 1.6 in. 40mA.Requires a 9V DC battery.282338 Kit..$12.95 or $11.95 ea./3+

Signal GeneratorWave output: sine, triangle, square andintegrator. Signal frequency about 1KHz (fixed). Output adjustable from 0-100mVrms. 2.2 x1.6 in. Requires a 9V DC battery.282301 Kit ....$9.95 or $8.95 ea./3+

MetronomeLED beat indication. Adjust volumeand beats per minute . Includesspeaker and power switch. 2.4 x 1.7in. Requires a 9V DC battery.282302 Kit..$11.95 or $10.95 ea./3+

LED Running LightLEDs come on one at a time insequence or different selectableeffects. Adjustable speed. 8 LEDs. 3.5x 1.6 in. Requires a 9V DC battery.282303 Kit ....$9.95 or $9.45 ea./3+

Rolling Clock35 LEDs. Animated rolling time/datedisplay with 12 hr. mode (24h-modewhen setting clock). 20mA max. 5 x2.6 in. Requires a 9V DC battery.282317 Kit..$19.95 or $18.95 ea./3+

Rolling MessageCreate a moving message with 35LEDs. Maximum of 16 characters.Adjustable speed. 5 x 2.6 in. 20mAmax. Requires a 9V DC battery.282318 Kit..$19.95 or $18.95 ea./3+

Simple One Channel Light OrganModulates a lamp according to themusic signal. Adjustable sensitivity(2W to 60W). Max. load is 120W at120VAC and 230W at 230VAC. 2.4x 1.6 in. Requires a 9V DC battery.282306 Kit..$13.75 or $12.95 ea./3+

Low Voltage Light OrganMake lamps flash to the music.Optically isolated speaker input.Adjustable sensitivity. 1.8 x 3.5 in.Requires 12VDC with adapter. 282309 Kit..$14.95 or $13.95 ea./3+

Mini Traffic LightIncludes 12 LEDs. Realistic operation with adjustable delay. Kit is great for model railroads, exhibitions or as a toy. 15mA. Includes a power switch. 2 x 1.4 x 4.5 in.Requires a 9V DC battery.282325 Kit ....$9.95 or $8.95 ea./3+

Pocket VU MeterSurprise your friends in the disco! 5red LEDs. Built-in mic. and sensitivityadjustment. Requires a 3V Lithiumbutton battery.282310 Kit..$12.95 or $11.95 ea./3+

Light Sensitive SwitchAutomatically turns on at dusk andoff at dawn. Adjustable sensitivity.Delay circuit avoids cycling. 2.6 x 2in. Requires 12VDC with adapter.282319 Kit ....$9.75 or $8.95 ea./3+

Clap On/Off SwitchOperate lighting with a handclap.Features built-in safety turn-off timer.24V DC / AC 3A. 3.1 x 2.9 x 0.9 in.Requires 12VDC with adapter. 282333 Kit..$19.95 or $18.75 ea./3+

Water AlarmSounds alarm when water is detected. Built-in buzzer. Water sensor can be placed at a distance by cutting the board and using wires to connect the sensor. 1.8 x 2.8 in. Requires a9V DC battery. 282304 Kit ....$8.75 or $7.95 ea./3+

IR Light Barrier AlarmAnnounce visitors, warn against burglars and set boundaries. Audible (85dB) and visible (LED) alert. Includes 9Vbattery holder, on/off switch, adapterjack, receiver, schematics, transmitterand a slalom timing system. Indoorsonly. Requires a 9V DC battery. 282315 Kit..$10.95 or $9.95 ea./3+

Metal Detector Check for metal objects in walls,floors and ceilings. An LED turns onif the detector is in the vicinity ofmetal objects. Includes PC board,parts & manual. Req. 9V DC battery. 282079 Kit..$12.95 or $12.45 ea./3+

Flashing LEDsAdjustable flashing speed with two potentiometers. For a variety of uses such asconstruction and recreational. 1.2 x 1.4 x 0.6 in.Requires a 9V DC battery.282928 Kit ....$5.75 or $4.95 ea./3+

Car Alarm SimulatorLED with realistic appearing flash to simulate an active car alarm.Activates automatically when theengine is turned off. Adj. sensitivity.Comes with pre-wired LED-holderand 2 warning labels. 2.3 x 1.8 in.Requires 12VDC with adapter. 282320 Kit ....$7.45 or $6.95 ea./3+

Page 8: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E8 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALKITS/TRAINERS

Fundamentals of Electronics KitKit includes a breadboard, switch, connection wires,transistors (NPN/PNP), red and green LEDs, capacitors,resistors, diode and photoresistor, buzzer, 9V battery anda teacher's guide. 360186 Grades 7-12 ............................................$79.95

Investigating Electricity LabExplore the concepts of electric currents, open/closedcircuits, and series/parallel circuits. Also investigate staticelectricity using an electroscope. Grades 7-10.282200 Class Lab for 40 ..........................................$135

Snap Circuits™

Educational Kits Make learning electronics a “snap.” Just follow the colorful pictures in the manual and build over 300 projects,such as AM radios, burglar alarms, flashlights, doorbells,and much more. You can even play electronic games withyour friends! Enjoy hours of educational fun while learningabout electronics. No tools required. Uses AA batteries(not included).282378 Snap Circuits Jr. - Over 30 Parts ..................$29.95282379 Snap Circuits - Over 60 Parts ......................$58.95

Build Over 300Projects!

50-in-1 Electronic PlaygroundLearn about the basic principles of electronics whilebuilding these exciting circuits: finger touch lamp, magneticbridge, voltmeter, Morse code, alarm, electronicnoisemaker, electronic kazoo, electronic keyboard,transistor radio, a radio announcer and metal detector.Uses spring hook-up method. Includes all the parts neededto perform 50 experiments. Requires a 9V battery.281645 Kit ..........................................................$19.95

Talking Clock KitLearn about the history and currenttechnology of talking machines, digitalsound, time machines and robots. Readabout electricity and electric circuits, andtest knowledge and skills while building atalking clock using the componentsprovided. Includes a 32-page book and allthe parts needed. 282435 ............$29.95 or $28.95 ea./3+

4-1 Action Kit LabDiscover how an electric bell is constructed and made toring. Build an operating motor. Find out how a generatormakes the electricity that makes things work. Metermeasures the amount of electricity used in yourexperiments. Easy-to-read, illustrated, lab-style manualis included. Ages 10 and up. Requires [2] AA batteries.282431 ............................................................$29.95

MicrobugsAttractive bright colored bug-shapedminiature robots. The microbug isalways hungry for light, it drivestowards it! Two open chassis sub-miniature motors. Adjustablelight-sensitivity suits almost any lightcondition, allowing full control of the‘bug-like’ behavior. LED ‘eyes’indicate driving direction. Stops intotal darkness. Adjustable speed.Requires AAA batteries.

Running Microbug KitMeasures 4 x 2.4 in.282321 ..$13.95 or $13.25 ea./3+

Crawling Microbug KitMeasures 4.3 x 3.5 in.282323 ..$17.95 or $16.95 ea./3+

KELVIN® Basics of Electricity LabTeach the basics of a DC electrical circuit, power calculationand cost of electricity using the students' own CD players!The KELVIN® Basics of Electricity attaches to any CD orcassette player with accessible batteries permittingstudents to measure the electrical power they consumewhile listening to music. Kit includes: DC Ammeter, DC Voltmeter, Voltage/Current Measurement Interface Box with Cables, “BoomBox”, Instruction Manual. Also comes with a Power Pointpresentation that teaches students about electrical powermeasurement and the cost of electrical power. 841354 Lab ....................................$295 or $285 ea./3+

ELECTRONICS

Page 9: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E9Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL WORKSHOP

Project Parts Kit• [1] Electrical Inventions Workshop Guide• [1] DesignLab Frisbee• [3] SPST Slide Switch• [2] SPST Momentary Pushbutton, SW, N.O.• [1] AA Battery Holder, 2-Cell with Leads• [2] AA Battery • [2] 3V Lithium Coin Cell Battery, CR2032• [2] Coin Cell Holder for CR2032• [4] Ultrabright Red LED, 1-3/4 with Flange• [1] Alarm Horn, 5-10 V DC• [1] Extra Large LED, Red• [1] Extra Large LED, Green• [1] Extra Large LED, Yellow• [6] Ceramic Disc Magnets, 3/4 in. D, 3/16 in. T• [1] Ceramic Block Magnet, 1.875 x 0.875 x 0.387 in.021291 ..........................................................$29.95

Spare Parts Kit • [2] DesignLab Frisbee• [3] SPST Slide Switch• [3] SPST Momentary Pushbutton, SW, N.O.• [3] AA Battery Holder, 2-Cell with Leads • [6] AA Battery • [3] 3V Lithium Coin Cell Battery, CR2032• [3] Coin Cell Holder for CR2032• [2] Ultrabright Red LED, 1-3/4 with Flange• [2] Alarm Horns, 5-10V DC • [2] Extra Large LEDs, Red• [2] Extra Large LED,s Green• [2] Extra Large LEDs, Yellow• [12] Ceramic Disc Magnets, 3/4 in. D, 3/16 in. T• [6] Ceramic Block Magnets, 1.875 x 0.875 x 0.387 in.021293 ..........................................................$29.95

Electrical Inventions Workshop Enough materials for a workshop of 12 students.• [2] 22 GA. Wire, Black, 100 ft. Roll• [2] 22 GA. Wire, Red, 100 ft. Roll• [25] Foam Boards, 20 x 30 in., 3/16 in. thick, White• [300] Drinking Straws, 19/64 in. dia., 7-3/4 long• [500] Jumbo Craft Sticks• [50] Clothespins, Spring Type• [1] Aluminum Foil sheet, 12 in. wide, 75 ft. Roll• [200] Brass Paper Fasteners, 2 in. L• [3] Jumbo Paper Clips, 100/box• [24] Brass Strips, 0.016 x 2 x 12 in.• [24] Tin Sheets, 4 x 10 in., 0.008 in. thick• [2] Rubber Bands, Assorted, 2 oz.• [1] Cotton Twine 300 ft. long Roll• [1] Velcro, 3/4 x 3 ft. long Strip• [1] Sinkers Egg, Steel, 5 oz., 24/pkg.• [5] 14mm Stell Balls, 5/pkg.• [2] Flat Washers, 1/2 in. ID 100/box• [1] 8D Common Nails, 5lb. Box• [1] Perforated Steel Pipe Strap, 3/4 x 50 ft. long Roll021292 ......................................................$335Complete Classroom PackIncludes: [12] Project Parts Kit (#021291), a WorkshopMaterials Pack (#021292), and a Spare Parts Kit(#021293).021294 ......................................................$695Electrical Inventions Workshop Guide652563 Booklet ..........................................................$15.95

ElectricalInvention

Classroom Kit

DESIGN LAB: ELECTRICAL INVENTIONS

SPONSORED BY

Design and build an alarmsystem for your bedroom, alight-up Frisbee ® you can useat night, and a fortune-tellingbox that is a new electricversion of the old Magic 8Ball® or the fortune tellersyou see at carnivals. This is avery fun, creative, open-ended challenge that isprobably unlike anything youhave done before. Before you can tacklethese design challenges, youfirst need to learn aboutelectricity, learn how to buildcircuits and switches and howto draw schematics ofcircuits. You will learn how towire series and parallelcircuits, and you need tounderstand how these twodifferent types of circuitswork. You will also learn howto strip and solder wires, aswell as how to use otherbasic tools to build things. Electrical Engineersunderstand how to designand build different types ofcircuits to make electricaldevices, like iPods and TVs,cell phones, kids toys,computers, weather satellites,robotic vacuum cleaners,electric cars, and many otherthings. This workshop willgive you the ability to designand build your own electricalinventions, and give yousome idea of what it is like tobe an Electrical Engineer.

Page 10: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E10 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS KITS/TRAINERS

KELVIN®

Investigating Electricity LabKELVIN®’s Investigating Electricity Lab takes a unique approach to teaching basic DC electricity concepts.The experiment board and components use a Velcro like technique to mount parts when assembling circuits.The lab has been designed to teach students the basic fundamentals and concepts behind DC electricityand circuits. The lab provides background information on many topics and activities that allow the studentsto apply their knowledge. The activities include Measuring Voltage, Assembling Simple Electric Circuits,Assembling Circuits Using Schematic Diagrams, Series and Parallel Circuits, Using a Meter to MeasureElectricity in a Circuit and The Effects of Voltage, Current and Resistance in a Circuit. 360029 Lab ....................................................................................................................................$99.95

ORIGINAL IDEAS FROM

KELVIN® Making Wet Cells & Batteries Lab Design, build, test and experiment with electro-chemistry. Students will createwet cells and batteries using a variety of different electrode and electrolyticsolutions while gathering and analyzing output data. This lab kit is the perfectcompanion to author Harry Roman’s booklet, Making Wet Cells and Batteries. Includes: detailed instructions, electrodes (copper, zinc, tin, aluminum, iron),Safe chemicals for creating electrolytic solutions, measuring containers andtools, cell containers, multimeters and alligator leads.842300 Enough for 24 Students ..................................................................$195

Making Wet Cells and BatteriesThe chemistry and materials in wet cells and batteriesare all around us. Under-standing how wet cells work,helps us understand rust and corrosion; and whybatteries behave the way they do and eventually needreplacement. Includes fun information and simpleexperiments. Wait until you see what you can use tomake wet cells and batteries! 652656 Booklet ................$14.95 or $13.95 ea./10+

Basic Parts KitResistors (1/4W), 2 ea.: 10Ω, 100Ω, 470Ω, 1kΩ, 2.2kΩ,4.7kΩ, 8.2kΩ, 10kΩ, 18kΩ, 27kΩ, 47kΩ, 82kΩ, 100kΩ,220kΩ, 330kΩ, 470kΩ, 1MΩLEDs (T 1-3/4 size), 5 each of Red, Green, YellowRadial Electrolytic Capacitors (50V), 2 each: 1mF,4.7mF, 10mF, 47mF, 100mF, 470mF, 1000mFRadial DIP Mylar Capacitors (100V), 2 each: 0.001mF,0.0047mF, 0.01mF, 0.047mF, 0.1mF, 0.33mFCeramic Disc Capacitors (500V), 2 ea.: 2.2pF, 4.7pF,10pF, 1pF, 22pF, 47pF, 100pF, 220pF, 470pF, 680pFInductors, 1 ea.: 4.7mH, 10mH, 47mH, 100mH, 470mH,1mH, 10mH, 33mHTrim Pots (1-Turn), 1 each: 500Ω, 1kΩ, 5kΩ, 50kΩ,100kΩ, 500kΩ, 1MΩSwitches, 2 each: Push-button, SPDT slide, DPDT slide,8-pos. DIPDisplays, 2 ea.: 7-segment common cathode, 7-segmentcommon anodeTransistors, 2 ea.: PN2222, PN2907, 2N3055, 2N3904,2N3906, 2N5457Integrated Circuits, 2 each: 7805, 7812 Reg., LM386Audio Amp, 555 Timer, 741 Op-Amp, 74LS00, 74LS02, 74LS08, 74LS10,74LS47, 74LS74, 74LS86, CD4013, CD4017Diodes, 2 each: 1N4148, 1N4001, 1N34, 1N4728,1N4733, 1N4739, 1N4743, 1N4747Miscellaneous: 25 ft. of 22AWG Hook-up wire, Alligatorlead sets, 5V DIP relay, Photo cell, Microphone, Speaker,Buzzer, 9V battery snap, 1.5A 100V bridge, 4A 200V SCRPlastic Container: 11 x 7 x 1-1/2 in. with 18 divisions

282462 ......................................................$79.95

Page 11: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E11Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSKITS/TRAINERS

KELVIN® Learn About Electronics Mini LabMini Lab—No Soldering is Required! Lab Covers: Whatis a Circuit?, Switches, Series Circuits, Batteries in a Series, ParallelCircuits, Flashlight, Traffic Light Challenge, Even Better Flashlight,Short Circuits, Continuity Tester, Coordination Game, Morse Codeand Maze Game. Includes assembled board, banana plugs and instructions manual.841749 ........................................................................................................................................$29.95

KELVIN® Clip-On™ Electronics Experiment LabA low cost, no frills trainer that expands as your student’s knowledge base builds. Covers a varietyof basic electronic components found in everyday use. Parts are connected together into circuitsusing jumper leads and our “parts holder”. Parts include a variety of switches, lamp, LED, buzzer,piezo buzzer, motor, fixed resistor, photoresistor, variable resistor, power pack (batteries not included),jumpers and instructions. No soldering is required.841980 Mini Lab ..........................................................$39.95 or $34.95 ea./10+ or $32.95 ea./20+

KELVIN® Binary Quartz ClockKELVIN®’s exclusive 24-hour binary quartz accurateclock features built-in alarm and bi-color LEDs.Includes a built-in alarm, DC wall transformer anddetailed assembly instructions.840589 Kit ....................$87.95 or $84.95 ea./10+

ORIGINAL IDEAS FROM

Find more ENERGY PROJECTS in the POWER & ENERGY chapter.

Page 12: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E12 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS SOFTWARE

Circuit WizardCircuit & PCB Design Software

By integrating the entire design process, Circuit Wizard provides you with all the tools necessary toproduce an electronics project from start to finish – even including on-screen testing of the PCB priorto construction! Designing is easy with Circuit Wizard. Just grab the components you need from the library, connectthem together using the intelligent wiring tool and then press the ‘Play’ button to begin simulation. SPICE circuit simulation—Circuit Wizard features a new simulation engine based on BerkeleySPICE. This industry-standard technology is the most advanced in the world, so you can be confidentthat results will be very fast and accurate.121747 Hobbyist Version 1.7, Single User ................................................................................$175121748 Professional Version 1.7, Single User ..................................................................................$275121743 Educational Version 3★, Single User ....................................................................................$275121744 Educational Version 3★, 5-User Network ..............................................................................$695121745 Educational Version 3★, 5-User Extension Network ................................................................$245121818 Educational Version 3 ★, 25-User Site License ....................................................................$1,495

KELVIN® is the Exclusive USADistributor of Circuit Wizard

Circuit Wizard Professional has theseextra features:• 1,000 extra components to choose from.• More virtual instruments including logic

analyzer, function generator, word generatorand DC power supply.

• Double-sided and Interactive PCB routing.• DXF export for CAD/CAM.

Circuit Wizard Educational has theseextra features:• 1,000 extra components to choose from.• More virtual instruments including logic

analyzer, function generator, word generatorand DC power supply.

• Double-sided and Interactive PCB routing.• DXF export for CAD/CAM.• Component fault simulation for

teaching students about fault-finding.• Educational support material & courseware

authoring tools.• Network support for Educational Versions.

★ EDUCATIONAL VERSIONS SOLD TO SCHOOLS ONLY

Designed with EducationalInstitutions in mind. Easy to

teach and easy to learn!

A revolutionary system that combines circuit design, PCBdesign, simulation and CAD/CAM in one complete package.

PCB Wizard 3PCB DESIGN SOFTWAREA powerful package fordesigning single-sided & double-sided PCBs.

PCB WIZARD 3 is great for designing single- and double-sided PCBs. It provides a range of tools for all traditionalsteps in PCB production and eliminates steep learning curves. Drag and drop components to a document andconnect them with the intelligent wiring tool. Select ”Convert to PCB” and PCB Wizard 3 does the rest.PCB Wizard 3 Professional version has these extra features: • 1000 extra components to choose from.• Double-sided and Interactive PCB routing.• DXF export for CAD/CAM

PCB Wizard 3 Educational includes Professional features plus: • 1000 extra components to choose from• More virtual instruments, incl. logic analyzer & word generator• Component fault simulation for teaching students fault-finding.• Educational support material and courseware authoring tools.• Network support (Standard/Pro editions won’t run on networks).

121450 Hobbyist Version, Single User ................$79.95121451 Professional Version, Single User ..............$175121763 Educational Version★, Single User ............$175

121452 Educational Version★, 5-Users..................$495121453 Educational Version★, Add. 5-Users ..........$195

Page 13: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E13Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSSOFTWARE

Circuit Design and Simulation Software Has Never Been More User-Friendly!

LivewireCIRCUIT DESIGN

SOFTWAREFor designing andsimulating circuits

LIVEWIRE is a simulated electronics lab that uses animation and sound to demonstrate principles of electroniccircuits. 100’s of components can be connected to investigate behavior of circuits. Simple interface helps to buildcircuits quickly. Livewire integrates with PCB Wizard 3, so when you’ve simulated a circuit, transfer it with theclick of a button. PCB Wizard 3 automatically places all components & routes the circuit.Livewire Professional has these extra features: • 1000 extra components to choose from.• More virtual instruments, including logic analyzer,

function generator and word generator.

LIvewire Educational includes Professional features plus: • Component fault simulation for teaching fault-finding.• Educational support material and courseware authoring tools.• Network support (Standard/Pro editions don’t run on networks).• Multi-user versions offering discounted prices.

121442 Hobbyist Version, Single User................$79.95121443 Professional Version, Single User ..............$175121764 Educational Version★, Single User ............$175

121444 Educational Version★, 5-Users..................$495121445 Educational Version★, Add. 5-Users ..........$195

Bright SparkTHEORY TEACHING

SOFTWAREA fun simulation

package to learn about the world of electronics.

BRIGHT SPARK combines on-screen animation with realistic simulation to bring circuits to life. It assumes noprior knowledge and includes built-in courseware to learn key electronics principles. Experiment with over 40components as well as a voltmeter, ammeter and oscilloscope to record circuit measurements. Interactiveworksheets teach principles behind electricity and electronics. Activities include Ohm's law, Series and parallelcircuits, AC and DC circuits, Kirchoffís laws, Resistance, Capacitance, Logic and Transistors.Bright Spark Professional has these extra features: • Large component library.• Electronics theory teaching couseware.

Bright Spark Educational includes Professional features plus: • Courseware authoring tools.• Network support (Standard and Pro editions won’t run on networks).• Multi-user versions offering discounted prices.

121438 Hobbyist Version, Single User ................$79.95121439 Professional Version, Single User ..............$175121766 Educational Version★, Single User ............$175

121440 Educational Version★, 5-User Network ......$495121441 Educational Version★, Add. 5-Users ..........$195

Control Studio 2SYSTEMS MODELING

SOFTWAREHighly innovative simulation

package for prototyping electonic systems

CONTROL STUDIO 2 provides a rapid method of developing circuit ideas, allowing you to consider differentscenarios before a final design solution. Compatible with Circuit Wizard, Livewire & PCB Wizard 3, it is easy toturn your ideas into a schematic or PCB. Creating circuits could not be easier. Drag and drop subsystem blocksfrom the parts gallery onto your document, link them with connectors and press “play”. Edit with built-in toolssuch as panning, clipboard and grid. Control Studio Professional version has these extra features: • Larger component library.• Electronics-systems theory teaching courseware.

Control Studio Educational includes Professional features plus: • Courseware authoring tools.• Network support (Standard and Pro editions won’t run on networks).• Multi-user versions offering discounted prices.

121446 Hobbyist Version, Single User ................$79.95121447 Professional Version, Single User ..............$175121765 Educational Version★, Single User ............$175

121448 Educational Version★, 5-User Network ......$495121449 Educational Version★, Add. 5-User ............$195

Page 14: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E14 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS LABS / TRAINERS

ORIGINAL IDEAS FROM

Experiments : • Resistor Color Code• Resistor

measurement• Ohm’s Law• Measuring Voltage• Measuring Current• Series Circuits• Photocells• LED Current

Limiting• Var. Time Constants• Capacitors• Using Switches• Using Buzzers• SPDT Toggle

Switch with LEDs• CMOS OR Gate• CMOS AND Gate• Diode Operation• Transistor as Switch• Transistor as Amp• Crystal Radio

with Amplifier• Kirchhoff’s Law• 555 Timer IC

with LED Flasher• 555 Timer IC

with Buzzer• 555 Timer

Delay Circuit• Basic PA System• Audio Power Amp

with Speaker• Photocell Switch• Alarm Buzzer• Logic Inverter• Microphone• LED with Buzzer• Sound Generation

Circuits• Parallel Circuits• Binary Numbers• Lights & Switches

Actual Size is 6-1/4 x 6-1/2 in.KELVIN® 1st Breadboard Lab™

Introduce beginners to electronics! This easy to use trainerlets students build circuits that are far from simple in function.Breadboards originated as a way to lay out and wire electroniccircuits. This makes it easy to design, experiment with, and testcircuitry without etching and soldering PC boards. Studentsexplore a wide variety of electronic concepts simply by stickingcomponents into the breadboard.This trainer not only contains a small breadboard for studentsto assemble circuits on, but includes basic components thatmost circuits use—right on the board, ready for easy wiring.

In addition, an assortment of loose parts are included to buildthe 30 experiments in the lab manual and to design countlesscircuits. The completely assembled trainer includes a 6-1/4 x 6-1/2" breadboard, all the necessary experiment components anda detailed lab manual.840739 Trainer, English ..............................$99.95 or $95.95 ea./6+841009 Trainer, Spanish..............................$99.95 or $95.95 ea./6+650801 Additional Manual, English ............$19.95 or $17.65 ea./6+

651240 Additional Manual, Spanish ..........$19.95 or $17.65 ea./6+

"The KELVIN® 1st Breadboard Lab™

works well because most of theparts are fixed to the board whichmakes it easier for the students touse and less parts are lost orbroken."– Patrick Klubben, Winner Middle School, SD

KELVIN® has the LowestPrices on Breadboards!

$395AsLowAs

PerEachOne

Available in Spanish or English

Page 15: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E15Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSLABS / TRAINERSORIGINAL IDEAS FROM

The L.D.T. Trainer gives you the basics for logic in electronics! Also available in Spanish!

Board shown Close to Actual Size of 7-1/2 x 4-1/4 in.

KELVIN® L.D.T.™ Laptop Digital Trainer Designed with feedback from electronics teachers, the KELVIN® L.D.T™ hasthe best features of expensive trainers in a low-cost, high-quality version. Eventeachers with basic digital electronics knowledge can follow the instructions,yet the trainer is challenging enough for advanced students. The trainer features one-digit, true hexadecimal display with built-in logic,memory, decoder, drivers and full alpha characters. It also has two independentclocks with adjustable frequency and duty cycles. The Lab Manual explores: Logic Gates, Inverters, Double Inverters, LogicGate Inverters, Logic Functions, Oscillators, Counters, Flip-Flops, HexadecimalNumbers and Binary Numbers. The L.D.T.™ Trainer includes: 400-point breadboard, GND power distributionbus, VCC power distribution bus, SPDT pushbutton switch, [4] data bit switches,[4] LED displays with IC drivers, plug-in power supply, +5V AC voltage regulator,basic components, hook-up wires, compact carrying case, and lab manual. Theassembled trainer is factory-tested with a 1 yr. warranty on parts and labor. 4-1/4 x 7-1/2 in. board. 840460 Laptop Digital Trainer with English Manual......................$125 or $115 ea./3+841008 Laptop Digital Trainer with Spanish Manual ....................$125 or $115 ea./3+

“I have eight Digital Trainers and considerthem the best digital trainer for the money”— Bob Hoskins, Turlock High School, Turlock, CA

“I have 20 Laptop Digital Trainers and havebeen using them over 5 years. I love them.”— Fred Roman, Morristown High School, NJ

Page 16: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E16 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS LABS / TRAINERS

KELVIN® Belly Bear I™ Electronics Trainer Electronic learning made easy with quick disconnect connections on this a self-contained, assembled trainer. Create and test circuitry while learning aboutdiscrete components. Actual board size is 8-1/2 x 10-1/2 in. The Belly Bear I™ includes the following, built-in:

840985 Belly Bear I™ Electronics Trainer - Grades 1 & Up ............$145 or $125 ea./5+

A

B

C

D

E

F

G

MORE FROM KELVIN®Mini Bulb with Threaded Base2.2V, 0.25A. #222.260016 [A] ..........................35¢ ea./5+ or 30¢ ea./50+

Simple Bulb Holder Fits Mini Threaded Bulbs.260129 [B] 20/pkg. ....................$4.95 or $4.65 ea./6+

Batten Mini Bulb HolderPlastic, Fits Mini Threaded Bulbs.250036 [C] 10/pkg. ..................$4.95 or $4.65 ea./6+

Clip-On Mini Threaded Bulb Holder Plastic holder clips on 3/8 in. W craft stick.260130 [D] 10/pkg. ....................$5.95 or $5.45 ea./6+

Diffused LEDs 5mm, T 1-3/4.260020 [E] Red LED ............10¢ ea./20+ or 5¢ ea./100+260027 [E] Green LED ........11¢ ea./20+ or 8¢ ea./100+260026 [E] Yellow LED ........11¢ ea./20+ or 8¢ ea./100+

Reed Switch / Magnets 840981 [F] 5/pkg. ......................$3.95 or $3.65 ea./6+

Buzzer with Wire Lead80dB, 6-9V DC. Includes wire lead.680089 [G] ..........................$1.25 or $1.15 ea./10+

Batteries Are Included • Actual Size is 8-1/2 x 10-1/2 in.

• Buzzer for sound• Motor for motion• Capacitors to demonstrate

hi/low capacitance• Resistors to demonstrate

hi/low resistance• [2] Fuses (a good one and

a bad one for testing)

• [2] Diodes• [3] Light Bulbs• [3] LEDs• Assorted Switches• [6] Batteries wired in series• Student Manual (60 pgs.)• Teacher’s Guide (75 pgs.)

“My 2nd grade students have explored series and parallel circuitswith this trainer [KELVIN®’s Belly Bear™ Trainer]. They learned a lotabout individual components as well as energy requirements. The3rd grade students have explored series and parallel circuits withthis trainer. Quick connects are easy for all age levels. Math clubused the activity on how many batteries you need to provideenergy for certain components really made sense! It also was anatural lead in to learning to use a digital multimeter to testcontinuity in circuits & battery charge.”

– Terry Thode Ernest Hemingway School, Ketchum, ID

ORIGINAL IDEAS FROM

Page 17: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E17Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSLABS / TRAINERSORIGINAL IDEAS FROM

The Belly Bear II™ Lab ManualIncludes: • Meet the KELVIN® Belly Bear

II™• Electrical Safety • Energy Can Change • Continuity & Watt• Also Available in Spanish

• Where Does Electricity ComeFrom?

• Generator vs. Batteries• How much Electricity is Enough?• Lamps, Electrical Motors, LEDs,

Switches, Condensers, Resistors,Diodes & Fuses

• Working with Fractions

KELVIN® Belly Bear II™ Electronics Trainer KELVIN’s® Belly Bear™ Trainers are an economical way for students, grades1 and up, to learn about electronics. No prior electronics knowledge, on thepart of the teacher or student, is needed. Quick disconnect connections makeit easy to create and test circuitry while learning about discrete components. The Teacher Guide includes Lesson Plans, Teacher Aids for each Lab, SuggestedDiscussions, Assessment Tests with Answer Keys, and a Glossary. The StudentManual contains numerous labs and projects. Self-contained, assembled trainer includes built-in: Buzzer for sound,[2] Motor for motion and power generation, Capacitors to demonstratehi/low capacitance, Resistors to demonstrate hi/low resistance, [2] Fuses (agood one and a bad one for testing), [2] Diodes, [3] Light Bulbs, [3] LEDs,Assorted Switches, [6] Batteries wired in series or parallel, Student Manual(60 pgs.)and a Teacher’s Guide (75 pgs.).Board measures 8-1/2 x 10-1/2 in.840993 Belly Bear II™ Trainer with English Manual....................$165 or $145 ea./5+841235 Belly Bear II™ Trainer with Spanish Manual ..................$165 or $145 ea./5+

PROJECTS INCLUDE:Combining a Motor & LED • Traffic Light Door Buzzer for Hearing ImpairedSending a Telegraph Message Door & Showcase Burglar Alarm

Batteries Are Included • Actual Size is 8-1/2 x 10-1/2 in.

Page 18: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E18 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS LABS / TRAINERS ORIGINAL IDEAS FROM

KELVIN®

Basic 3™ TrainerElectronic circuits andschematic diagrams can be difficult to understandwhen learning about them.Even simple concepts can bedifficult to grasp! What’sneeded are simple, hands-on activities that explore theconcepts as students learnabout them - KELVIN’s® BASIC 3™ Trainer! The original BASIC 3™ concept and activities were designed and written byEarl D. Gates, the author of Introduction to Electronics: A Practical Approach, 5thEdition, published by Delmar Publishers (see details on page 429). Furtherdeveloped by KELVIN® engineers, the BASIC 3™ Input-Process-Output Trainerintroduces students to electronics in a non-threatening, thematic way. Hands-on activities help students, Gr. 5 & up, explore electronics at their own pace. The compact, assembled trainer features a plug-in motherboard, 6-1/4 x 9-1/4 in. , and built-in sensors. Stackable banana plug leads are used forquick circuitry design and hands-on experiments. The assembled trainer includes: Expandable Motherboard, 9V DC WallTransformer, Stackable Banana Plug Leads, Ten Activity Cards, Design Portfolio,Detailed Teacher’s Guide, and Plug-In Module Ready (additional plug-in modulesfor digital and analog are on the next page).840551 Basic 3™ Trainer ..................................................................$135 or $125 ea./6+840796 Basic 3™ Complete Set (See Details on Next Page)............$895 or $845 ea./3+990136 Stackable Banana Cables ..........................................$29.95 or $26.95 ea./10+

INPUT –>PROCESS –>OUTPUT

"8th grade students in my Intro toTechnology course completed a lab activitybased on KELVIN®’s BASIC 3™ Digital Board." –David E. Simpson, Henry V. Burger MiddleSchool, West Henrietta, NY

Actual Size is 9-1/4 x 6-1/4 in.

BASIC 3Activity Cards

Page 19: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E19Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSLABS / TRAINERS

Mounting Bases for Plug-In Boards Organize and store your plug-in Basic 3™ boards.840797 Analog Mounting Base....................$95840798 Digital Mounting Base ....................$95

Introduction to Electronics By Earl D. Gates. Complete introduction to basicelectricity and electronics principles withemphasis on hands-on application of theory.Expanded discussion of Capacitive AC,Inductive AC, and Resonance Circuits.MultiSIM® problems have now been integratedinto this book, providing even greateropportunities to apply basic electronicsprinciples and develop critical thinking skills. 650638 Textbook, 375 Pages ................$215.95650639 Teacher Guide ..........................$29.95650640 Workbook ..............................$113.95

KELVIN® BASIC 3™ External SensorsUse instead of the built-in sensors on the BASIC 3™

motherboard to build a “Smart House,” explorecontrols, etc. External sensors reach up to 3 feetaway from the BASIC 3™ motherboard.

KELVIN®

Basic 3™

TrainerComplete Set

Includes:BASIC 3™ Trainer, 10 Activity Cards,Design Portfolio,

All Digital Plug-In Boards,

All Analog Plug-In Boards, anda Teacher’s Guide.

840796, $895or $845 ea./3+

ModularUnit

KELVIN® Basics of Electricity LabTeach the basics of a DC electrical circuit, power calculation and cost ofelectricity using the students' own CD players! The KELVIN® Basics ofElectricity attaches to any CD or cassette player with accessible batteriespermitting students to measure the electrical power they consume whilelistening to music. Includes a Power Point presentation that teachesstudents about electrical power measurement and the cost of electricalpower. The Power Point presentation shows what is being learned, how theapparatus is to be used, how the measurements are to be taken and howcalculation are to be made as part of this unit. Kit includes: DC Ammeter, DC Voltmeter, Voltage/Current MeasurementInterface Box with Cables, “Boom Box”, Instruction Manual and PowerPoint Presentation.841354 Basics of Electricity Lab ....................................$295 or $285 ea./3+

KELVIN® BASIC 3™ Analog & Digital Plug-In Boards

ORIGINAL IDEAS FROM

ORIGINAL IDEAS FROM

STOCK # SENSOR $ 1-2 $ 3+

840653 LDR 12.95 11.95

840654 Thermistor 12.95 11.95

840655 Micro Lever 12.95 11.95

840656 On/Off 12.95 11.95

840657 Liquid 12.95 11.95

840658 Magnetic 12.95 11.95

840684 Microphone 12.95 11.95

840894 Set of 7 12.95 11.95

STOCK # TYPE # NAME DESC. BRDS. $ 1-2 $ 3+

840553

Analog

A Analog Outputs

Explores analogoutputs, resistors, and potentiometers.

3 125.00 119.00

840650 B 555Timers

Covers circuits and 555 timers.Includes circuitry.

2 99.95 94.95

840625 C Comm.Covers wire, fiberoptics, and infraredcommunications.

2 99.95 94.95

840836 D Op-Amp — 1 59.95 49.95

STOCK # TYPE # NAME DESC. BRDS. $ 1-2 $ 3+

840657

Digital

A LogicGates

Shows multipleinput devices, logicgates, outputs, etc.

3 125.00 —

840658 B DigitalOutputs

Freq. input clocks,enhanced outputdisplays & flip-flops.

3 125.00 —

840684 C CountersGeneral counters,freq. counters & shift registers.

1 49.95 —

840894 D BinaryAdders

4-bit binary addersand subtractors.Includes circuitry.

2 99.95 —

Page 20: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E20 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS LABS / TRAINERS

The 40 page Student Manual and 115 page Teacher Guide werewritten and developed by Robert Campbell. The in-depth Teacher Guideincludes the following chapters: Lesson Plans for 9 Projects, Glossary,Assessment Tests & Answer Keys, The NOT Condition, The AND Condition,The OR Condition, Properties of the 3 Switches, The Diode, The Resistor,The Solar Cell, The Photo Cell, The Electronic Switch, The Thermistor, andCircuit Board Diagrams. Additionally, each chapter lists Vocabulary,Materials, Skills, Standards and Outcome. The Elect™ Trainer includes [5] Input Boards, [5] Process Boards, [6]Output Boards and [4] Additional Boards. Also comes with banana plugleads and a FREE 150LE KELVIN® Digital Multimeter. The kit requiresassembly and soldering. Boards measure 3 x 3 in. 841068 Elect™ Trainer Kit — Grades 6 & Up ................$275 or $265 ea./3+840958 Elect™ Trainer, Assembled ............................$395 or $385 ea./3+

AN IDEAL WAY FOR STUDENTSTO LEARN ABOUT ELECTRONICCIRCUITRY & COMPONENTSThis trainer is the ideal way for students to learn about electronic circuitry andcomponents. Students learn the vocabulary of electronics like: OR, NOT, AND,sensor names, and all of the boards. Students will also use a Multimeter and basicelectronic symbols. Also, learn about conditions and construct a truth table andexperiment with sensors. You can then apply what you've learned to everydayproblems, practice writing as instructed and learn about scientific standards.

INPUTBOARDS

SOLAR CELL • PHOTO CELLTHERMISTOR • MICROPHONE

TOGGLE SWITCH

PROCESSBOARDS

DIODE • POTENTIOMETERLOGIC (AND, OR, NOT) PUSHBUTTON SWITCH

OUTPUTBOARDS

DC MOTOR • BUZZER 3-COLOR LEDS • SPEAKER

SINGLE LAMP • TRIPLE LAMP

POWER GROUP:

BATTERY BOARDPOWER SUPPLY

ADAPTERCONNECTING CABLEs

FREEMULTIMETER!

ORIGINAL IDEAS FROM

Page 21: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E21Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSLABS / TRAINERS

FREE!200LE KELVIN®

DIGITAL MULTIMETER

LEARN ABOUT DISCRETE COMPONENTSIncludes [3] Input Boards, [15] Process Boards, [3] Output Boards, banana plug leads andFREE 201LE KELVIN® Digital Multimeter. Requires assembly and soldering. Boards are 3x 3 in. Teacher Guide includes: Lesson Plans, Glossary, Assessment Tests and AnswerKeys. Contains information on Capacitors, ICs, Zener Diodes, Decade & Binary Counters,Voltage Regulators, Transistors, Generators, Relays, Displays, Decoders, Drivers, Vocabulary,Materials, Skills, Standards and Outcome. Grades 6 and up.841069 RONIX™ Trainer Kit ..................................................................$295 or $285 ea./3+840964 RONIX™ Trainer, Assembled ........................................................$395 or $385 ea./3+

INPUTBOARDS

5V RegulatorSingle Pulse Generator

Variable Pulse Generator

OUTPUTBOARDS Buzzer3 LEDs

7-Segment Display

PROCESSBOARDS

Inductor • NPN Transistor[2] IC 7400 Series • Polarized Capacitor

PNP Transistor • Non Polarized CapacitorSCR • Decade Counter • Zener Diode

NFET • Binary Counter • DelayDecoder Driver • Resistor

BONUS! Create you own circuit designs on the 740 point breadboard

with pins for voltage and ground. [3] sets of 8 pins for connecting your

circuit to the RONIX™ boards.

ORIGINAL IDEAS FROM

Page 22: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E22 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS LABS / TRAINERS ORIGINAL IDEAS FROM

Sense & Control: Programmable Control Without A Computer

KELVIN® If…Then™ Trainer Sense & Control – Programmable Logic Controller. Learn more about the elements of conditionprogramming. Also, use it to control a model of your design such as a greenhouse, light show, house alarm,doll house automation, etc. The If…Then™ programming is written in simple logic for quick learning. The assembled controller includes a light sensor, switch sensor, buzzer, light bulb, motor, wall adapter anda RS232 cable. For Grades 6 and up. 840990 ..........................................................................................................$199.95 or $189.95 ea./3+

Features include:• On-Board Sense and Control Programming • 2-Line Alphanumeric, Backlit Display• Input –> Process –> Output • Built-In Microprocessor & Keyboard • [4] Input Sensors: switch, photocell, etc.• [8] Outputs (buzzers, lights, etc.)

or [4] Motor OutputsFind GENIE® PROGRAMMABLE CONTROLLERS in the Kre8® chapter on pgs. K4-5.

Page 23: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E23Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSLABS / TRAINERS

ORIGINAL IDEAS FROM

KELVIN® Logic Challenge Trainer™ A fresh and exciting way for students to learn about the digital logic circuits that areused in computers and almost all electronics equipment. Teachers can also use pre-wired logic circuits to demonstrate inverters and basiclogic gates. After using this trainer, students will be more prepared for work in advancecomputer operations.Key Features: • Pre-Wired Logic Circuits • Monitor Input/Output States• Interconnect with Banana Plug Leads • Easy to Learn, Easy to Read Student Workbook The Comprehensive Student Workbook contains: six demonstration projects, realworld examples, self-tests, explanation of experiment results and classes or self-pacedlearning.

Table of Contents• Basic Digital Logic• Binary Numbers & Codes• Making Binary Numbers

with Electronic Circuits• How to Use the Logic Challenge Trainer• Project 1 - Logic Inverter• Project 2 - AND Gate• Project 3 - NAND Gate• Project 4 - OR Gate• Project 5 - NOR Gate• Project 6 - XOR Gate Power is provided by a plug-in wall outlettransformer, built-in DC voltage regulator andseparate on/off switch. The assembled trainer comes with astudent workbook written by Lou Frenzel. Board measures 5-3/8 x 8-1/4 in.Ideal for Grades 9 to 12.840870 Logic Challenge Trainer™ ....................................................$135 or $125 ea./3+

The Most Economical and Conveniently-Sized IC Trainer!

KELVIN® IC Analyzer™ Students can explore the basic 7400 TTL series. Simplyinsert the chip into the socket to test theircharacteristics. A detailed lab manual contains an overview,theory of operation, testing procedures, 10experiments, experiment suggestions and reviewquestion answers. Experiments Cover: Logic Inverters,AND Gates, NAND Gates, OR Gates, NOR Gates, RS-Type Flip Flops, D-Type Flip Flops, Decoding, BinaryCounters, and BCD Counters. The KELVIN® IC Analyzer™ includes: 14-/16-pinTest Sockets with pre-wired ground connections forTTL or CMOS Digital ICs, [8] Popular Low-Power &Standard TTL ICs, [4] LED Logic Indicators, High InputIC Driver, 7-Segment LED Readout, BCD to 7-SegmentDecoder Driver IC, Decimal Display for BCD Code,and a 3-3/4 x 5-1/2 in. Breadboard. In addition, thisassembled trainer also comes with stackable bananaplug leads, patch cord wires, student lab manual.Requires four “AA” batteries.840644 ..........................$99.95 or $89.95 ea./3+220016 AA Alkaline Batteries ........80¢ or 75¢ ea./10+

Image is Slightly Smaller than Actual Size of 5-1/2 x 3-3/4 in.

KELVIN®

STUDENT WORKBOOK

LogicChallengeTrainer

Image is Smaller than Actual Size of 5-3/8 x 8-1/4 in.

Page 24: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E24 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS LABS / TRAINERS

KELVIN®

Everything 10™ Trainer The KELVIN® Everything 10™ Trainer is theMOST electronic trainer for your money!In addition to a Wire Jumper Kit and 12VPower Supply, this trainer includes the itemslisted below. Intended for use with yourtextbook; does not include curriculum.[2] Power Supplies• 5V Fixed Power Supply• 1.2-12V Variable Power Supply

[1] Function Generator • 0.4Hz-20KHz with 3 Outputs (Square,

Sinusoidal, Triangular) [4] Potentiometers • 1K Potentiometer• 10K Potentiometer• 100K Potentiometer• 1M Potentiometer

[12] Switches• SPDT Switch• Pushbutton Switch• [2] Fully Debounced Pushbutton

Switches with +/- Signal Outputs• [8] Signal Switches

[9] LEDs / Displays• [8] Fully Buffered LEDs• Large 7-Segment Display (3/4 in. High)[1] Breadboard• 400 Contact Breadboard841121 Kit ..............$135 or $125 ea./3+841122 Assembled ....$165 or $155 ea./3+

Shown Near Actual Size of 5-5/8 x 5-5/8 in.

THE MOST TRAINERFOR YOUR MONEY!

KELVIN® Stepper Motor Trainer Explore the industrial applications and technologyof stepper motors with KELVIN’s® Stepper MotorTrainer. Stepper motors are widely used in industryto provide timed or degree movement in automation,cameras, copy machines, and more. Students willlearn about the basic operation of a stepper motorthrough simple experiments. Additional activity ideasinclude having students design and build a conveyorbelt or elevator that is operated with the steppermotor and controlled by the computer. The softwareinterface helps students learn about computerizedcontrol. Experiments include:• Manual Stepper Motor Operation • Using Reverse Binary Code • Computerized Stepper Motor Operation• Programming • Creating Half-Steps and Full-Steps This assembled trainer includes a detailed lab manual,USB Interface and 5 x 2-7/8 in. board.841965 USB............................$295 or $275 ea./3+

Shown Near ActualSize of 5 x 2-7/8 in.

Students Learn About the Basic Operation ofStepper Motors Through Simple Experiments

ORIGINAL IDEAS FROM

Page 25: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E25Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSLABS / TRAINERS

KELVIN® Everything 50™ TrainerSuper Analog/Digital bench top trainer includes power supplies, function generator, potentiometers, switches (straight & debounced),LEDs (straight & buffered) and two 7-segment LED displays, Wire Jumper Kit and 12V Power Supply. The trainer includes all of the itemslisted below. Intended for use with your textbook; does not include curriculum.841143 Everything 50™ Trainer - Board measures 7-1/4 x 6-3/4 in. ................................................................$235 or $215 ea./9+ or $195 ea./10+220121 DC Wall Adapter (Optional Power Supply for Negative Voltage), 12V, 800mA ....................................................................................$9.95

Shown Close to Actual Size of 7-1/4 x 6-3/4 in.

SUPERANALOG/

DIGITALTRAINER!

[4] Power Supplies

• 5V Fixed

• 1.2 to12V Variable

• -1.2 to -12V Variable(Requires Power Pack #220121)

• 2.5V High Accuracy Voltage Reference Source

[1] Function Generator • 0.4Hz-20KHz with

3 Outputs (Square, Sinusoidal, Triangular)

[3] Inputs• Condenser Microphone• External Microphone Jack• Parallel Port with

DB25 Female Connector

[3] Outputs• Buzzer• 10A/125V Relay• External Speaker Jack

[4] Amplifiers• 0.5W Power Amp with Volume Control• Pre-Amplifier• [2] Independent Op/Amps

[16] Switches• SPDT Switch• Pushbutton Switch• [2] Fully Debounced

Pushbutton Switches with TTL Outputs

• [4] Switches with TTL Outputs

• [8] Fully Debounced Switches w/TTL Outputs

[4] Potentiometers • 1K Potentiometer• 10K Potentiometer• 100K Potentiometer• 1M Potentiometer

[3] Sensors• Photocell• Thermistor• Phototransistor[27] LEDs / Displays• [3] LEDs (Red, Yellow, Green)

with Current Limiting Resistors• [10] LED Bar Graph Display

with IC Driver (0-2.5V Input)• [12] Fully Buffered LEDs with

Dedicated Drivers• [2] 7-Segment LED Disp., 3/4 in.H,

with Hexadecimal Drivers (0-F)

[1] Breadboard• 400 Contact Breadboard

ORIGINAL IDEAS FROM

Page 26: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E26 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS LABS / TRAINERS

KELVIN® AC Troubleshooting Trainer™The assembled AC Troubleshooting Trainer™ includes: Pre-Wired Printed Circuit Boards (8-1/2"x11"); Three-Ring Storage Binder; Working Electronic Circuitswith DIP Switches; Student Lab Manuals with experiments and tests; and a Teacher’s Guide with detailed, documented faults.

840627 AC Troubleshooting Trainer™ ....................................................................................................................................................................$195 or $185 ea./3+

KELVIN® DC Troubleshooting Trainer™ The assembled DC Troubleshooting Trainer™ includes: Pre-Wired Printed Circuit Boards (8-1/2"x11"); Three-Ring StorageBinder; Working Electronic Circuits with DIP Switches; StudentLab Manuals with experiments and tests; and a Teacher’sGuide with detailed, documented faults.15 Problem-Solving Labs Cover:• Series/Parallel Circuits • Voltage Divider with Thermistor• Voltage Divider with Pot • Series Dropping Resistor w/ LED• Series Traces • Parallel Traces• Adjustable Bridge Circuits • Dual Voltage Source Circuits• Resistance Circuits in IC Form • 2-Way Switch Circuit with Bulb• Capacitor Charging/ Discharging • Time Constant• DC Diode Biasing • DC Inductor Effects• Transistor Switch Relay with LED • Photoresistive Input Control• 555 IC Timer as Stable LED Flasher840626 DC Troubleshooting Trainer™ ..........$195 or $185 ea./3+

About KELVIN® Electronic Troubleshooting Trainers with Built-In Troubleshooting Teacher Inputs KELVIN’s® Troubleshooting Trainers™ are ideal for middle school students and up. When workingwithin the field of electronics, students should know how to troubleshoot, evaluate, and repairelectronic circuitry. The KELVIN® Troubleshooting Trainers™ are inexpensive and easy to set-upbecause they require no wiring or soldering. Using troubleshooting and problem-solving procedures, KELVIN® Troubleshooting Trainers™

show students how to find a problem on a PC board and then fix it. The trainers were developedto make teaching troubleshooting fast, easy, and effective – with actual electronic equipment,hardware, and pre-wired circuits. According to the experiments, the teacher inserts a problem into the circuit using DIP switches.By following the circuits and measuring the components, students then isolate the trouble andfix it using problem-solving techniques and by resetting the DIP switches. System concept andstudent manuals developed by Lou Frenzel.

Actual Size is 8-1/2 x 11 in.

14 Problem-Solving Labs Cover:• Series RC/RL Circuits• Parallel RC/RL Circuit

• Series Resonance• Parallel Resonance• Low Pass Filter

• High Pass Filter• Band Pass Filter• Band Reject Filter

• Phase Shift Circuits• Transformers

Actual Size is 8-1/2 x 11

ORIGINAL IDEAS FROM

Page 27: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E27Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSLABS / TRAINERS

KELVIN® Digital Troubleshooting Trainer™

The assembled Digital Troubleshooting Trainer™

includes the following: Pre-Wired Printed CircuitBoards (8-1/2"x11"); Three-Ring Storage Binder;Working Electronic Circuits with DIP Switches; StudentLab Manuals with experiments and tests; and aTeacher’s Guide with detailed, documented faults.12 Problem-Solving Labs Cover:• Logic Gates (both TTL/CMOS) • Decoders / Encoders • Basic Flip Flops • Binary Comparators / Adders• Sequential / Combination Logic Circuits• XOR Gate and Applications • BCD Counters • Shift Registers • Multiplexer / Demultiplexer • Binary Up / Down Counters • 7-Segment Display • 3-State Bus • Static RAM840856 ................................$195 or $185 ea./3+

KELVIN® Communications Troubleshooting Trainer™

The assembled Communications TroubleshootingTrainer™ includes: Pre-Wired Printed Circuit Boards(8-1/2"x11"); Three-Ring Storage Binder; WorkingElectronic Circuits with DIP Switches; Student LabManuals with experiments and tests; a Teacher’sGuide with detailed, documented faults and theCommunication Electronics, 2nd Edition textbookby Lou Frenzel.12 Problem-Solving Labs Cover:• Amplitude Modulator• Diode Detection• Balanced Modulator• Frequency Demodulation• Class ‘C’ Amplifier• FSK Modulation• Fiber Optics Transmission and Receiving• Function Generator• Noise Amplifier• AM Pulse Mode• Parallel/Series Data Converter840951 ................................$385 or $365 ea./3+

Communication ElectronicsBy Louis E. Frenzel, author of the KELVIN® Troubleshooting Trainers™

Student Manuals. The Glencoe Basic Skills in Electricity & Electronicsseries has been designed to provide entry-level competencies foroccupations in the electrical and electronic fields. The series consistsof coordinated instructional materials designed especially for the career-oriented student. Materials focus on the theory, practices, applications,and experiences necessary for those preparing to enter technical careers.Glencoe/McGraw-Hill.650981 Communication Electronics - Textbook, 428 pages ..............$99.95

Actual Size is 8-1/2 x 11 in. Actual Size is 8-1/2 x 11 in. Actual Size is 8-1/2 x 11 in.

Provides Entry-Level CompetenciesFor Occupations in Electronics

KELVIN® Linear/AnalogTroubleshooting Trainer™

The assembled Linear/Analog Troubleshooting Trainerincludes: Pre-Wired Printed Circuit Boards (8-1/2"x11"); Three-Ring Storage Binder; WorkingElectronic Circuits with DIP Switches; Student LabManuals with experiments and tests; and a Teacher’sGuide with detailed, documented faults.12 Problem-Solving Labs Cover:• 1-Stage NPN/PNPCommon Emitter • Diode Biasing • Complementary Symmetry • Emitter Follower • Amplifier Circuits • Single Stage FET Amplifier • Audio Power Amplifier with Tone Control • Differential / Power Amplifiers • Amplifier w/ Constant Current Source • Operational Amplifier Inverter• Non-Inverting Amplifier/Follower • Operational Amplifier Comparator/Integrator • Active Filter with Operational Amplifier• Instrumentation Amplifier

with Bridge Input & Thermistor• Speakers / Mixers / Audio Oscillator • Linear and Switching / SCR Light Dimmer • Power Supply Regulator840857 ................................$195 or $185 ea./3+

KELVIN® TroubleshootingTrainers™ Complete setIncludes all five of KELVIN®’sTroubleshooting Trainers™ in onecomplete set! Trainers include AC, DC,Digital, Analog, Communications. 841402 ..............$995 or $895 ea./3+

Page 28: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E28 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS LABS / TRAINERS

ACVoltage

KELVIN® Home Electrical Wiring Trainer™

Students get valuable experience with home wiringtools and supplies. This comprehensive trainerincludes all the supplies needed for students tocomplete a number of hands-on activities likecreating and testing common AC/DC circuits.Subsequent activities challenge students as theywire progressively harder circuits. For Grades 9through College.Labs include: 1. Install an Unswitched Outlet2. Install [2] Unswitched Outlets3. Install a Switched Lampholder4. Install an Unswitched Outlet

and a Switched Lampholder5. Install an Unswitched Outlet

and a Switched Lampholder6. Install [2] Switched Lampholders7. Install an Unswitched Lampholder

and a Switched Lampholder8. Install an Switched Outlet

and an Unswitched Lampholder9. Install an Unswitched Outlet

and a Switched Outlet10.Install a 3-Way Switched Lampholder11.Install a 3-Way Switched Lampholder

and an Unswitched Outlet12.Install an Unswitched Fluorescent Lamp13.Install a Switched Fluorescent Lamp14.Install Low Voltage Bulbs15.Install a Buzzer840642 Kit ........................................$695

A B C D

E F G H

STOCK # FIG. DESCRIPTION $ 1-9 $ 10+

340050 A Turn Knob Light Socket 2.95 2.75

340008 B 1 in. Plastic Light Socket 2.95 2.75

340036 C Pigtail Light Socket, Rubber 3.95 3.25

340039 D Push-Through Light Socket 6.95 6.25

340161 — Push-Through Light Socket (Import) 1.79 1.61

340051 E Pull Chain Light Socket 6.95 5.95

340092 F 4 in. Ceiling Light Socket, Plastic 4.95 4.39

340034 G 4 in. Ceiling Light Socket, China 5.95 5.45

340049 H 4 in. Ceiling Light Socket, Plastic w/Outlet 6.25 5.75

STOCK # FIG. DESCRIPTION $ 1-9 $ 10+

340028 I Turn Knob Light Socket 3.95 3.55

340048 J 1 in. Plastic Light Socket 2.79 2.59

340007 K Pigtail Light Socket, Rubber 1.25 1.15

340004 L Push-Through Light Socket 3.50 3.15

340027 M Push-Through Light Socket (Import) 3.95 3.59

340011 N Pull Chain Light Socket 4.95 4.45

340081 O 4 in. Ceiling Light Socket, Plastic 3.95 3.45

340038 P Flat Connector, Rubber 4.49 3.95

340022 Q Square Connector 1.95 1.85

340041 — Round Connector 4.40 3.96

340029 — 3-Wire Connector 5.95 5.45

340021 R Adapter Connector .60 .50

340082 S Dead End Connector 5.95 5.45

Light Sockets

I J K

P QR S

L M N O

Plugs & Connectors

ORIGINAL IDEAS FROM

Page 29: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E29Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSLABS / TRAINERSORIGINAL IDEAS FROM

Low Voltage Input • Designed for SafetyKELVIN® Low Voltage Electric SystemThis specially designed lab take the mystery outof every day technological systems found at home. Each lab comes with a portable table top workstation, step by step instructions, explanations,theory and assessments. The supplied curriculumis student friendly and geared for generaleducation not vocational study. This trainer offers children, grades 6-12, theopportunity to see into the walls of their homeand discover how electrical energy is suppliedfor their use. Help your students solve the mystery of: Wheredoes electricity come from? How does it get intoour home? How is electricity distributed throughthe home? How do we make electrical energysafe? and How are circuits created? Using KELVIN®’s EXCLUSIVE proprietary lowvoltage DC system, students will safely wire ACcomponents (such as outlets, switches, breakers,a dimmer switch, light fixture and a ceiling fan)for practice with DC voltage. 841890 Assembled Trainer ..................$895

1 2 3

5 768

4

A B C D E F G H I

J LK M

STOCK # FIG. DESCRIPTION COLOR SIZE In. $ 1-9 $ 10+

340115 A Single w/ 2 Outlets Ivory 4 x 2-1/8 .45 .40

340114 B Single Toggle Switch Ivory 4 x 2-1/8 .70 .60

340118 C Dual Toggle Switch Ivory 4 x 4 .70 .60

340119 — Dual Toggle Switch White 4 x 4 .70 .60

340120 D Dual Outlet/Toggle Switch Ivory 4 x 4 .70 .60

STOCK # FIG. DESCRIPTION SIZE In. $ 1-9 $ 10+

340016 E Single Box Cover 4 x 2-1/8 .48 .40

340017 F Single with 2 Outlets 4 x 2-1/8 .95 .85

340018 — Single Toggle Switch 4 x 2-1/8 .65 .55

340015 G Dual Blank Cover, Flat 4 x 4 .70 .60

340013 H Dual with 4 Outlets, Flat 4 x 4 2.95 2.65

340014 — Dual Outlet/Toggle Switch 4 x 4 1.50 1.25

340031 I Octagon Blank, Flat, Meta 4 x 4 1.17 1.05

340035 — Octagon Toggle Switch, Flat 4 x 4 1.25 .95

340033 J Octagon Dual Outlet, Flat 4 x 4 1.25 .95

Plastic Cover Plates

Metal Electrical Box Cover Plates

STOCK # FIG. DESCRIPTION TYPE SIZE In. $ 1-9 $ 10+

340019 K Single Metal 4 x 2-1/8 2.95 2.65340108 — Single, Angled Nails Plastic * .80 .70340107 — Single, Side-Mount Plastic * 1.30 1.20340020 L Double Metal 4 x 4 1.75 1.55340030 M Octagon Metal 4 x 4 1.95 1.75

Electrical Boxes * 3-11/16 x 2-1/4 in.

STOCK # FIG. DESCRIPTION COLOR $ 1-9 $ 10+

340089 1 1-Pole Toggle Light Switch Ivory 1.25 1.10

340052 — 1-Pole Toggle Light Switch, Ground Brown 1.50 1.25

340053 2 3-Way Toggle Light Switch Ivory 2.25 1.95

340047 3 4-Way Light Switch Ivory 14.95 13.95

340057 4 Dimmer Light Switch, Push On/Off — 6.95 6.75

340059 5 In-Line Switch — 1.25 1.10

340044 6 Bell Pushbutton Switch, 1-3/4 in. dia — 2.85 2.65

640032 7 Plunger Contact Switch — 6.95 6.45

640028 8 Key Lock Switch, 3/4 in. dia. M.H — 13.95 13.25

Switches

Dual Duplex Outlet340010,

Brown, 120V1.05

or 85¢ ea./10+

Page 30: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E30 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS POWER SUPPLIES ORIGINAL IDEAS FROM

KELVIN® Kel-KPS™

Digital Display Power SuppliesBoth the single and dual power supply provide 0-20V DC at 2A. The systemcomes with a bright LED display(s), switchable between voltage and current.Built-in overload protection, overload indicator LED and circuit breaker(s). Easyto control large crank knob(s). Rugged metal case. The dual power supply hastwo independent power supplies in one box and is ideal for the dual maglevor other similar products. Durable and made in the USA.841386 Kel-KPS™ #102 ..............................................$295 or $275 ea./3+841387 Kel-KPS™ #103, Dual ................................................$395 or $375 ea./3+

KELVIN® Kel-KPS™ Variable Power SuppliesVariable, regulated power supplies with low ripple and short circuit protection.Ideal for electronic projects or for use with KELVIN®'s Power Pole™, MaglevRacer™, Community Power Station™, etc. The #100 model has a variable rangeof 0-16V DC, 1.5A. The #101 model supplies fixed voltages of 1.5, 3, 4.5, 6, 9and 12VDC at 1.5A.841051 Kel-KPS™ #100, 0-16VDC ....................................................................$125841052 Kel-KPS™ #101, Voltage Switch ........................................................$135

KELVIN® Variable Regulated Power Supply Kit 1.5-12V DC. High-quality, metered variable power supply. This kit includes projectcase, components, chassis, drilling template, and needed hardware. Requirespoint-to-point wiring, drilling of chassis and does not have a PCboard.840101 Kit ................................................................$37.95 or $35.95 ea./10+

KELVIN® Battery Charger & Power Supply KitFeatures a full wave circuit. This kit includes[4] silicon rectifier diodes, parts and wiringdiagram. 9-12V DC. Requires point-to-point wiring, drilling and does nothave a PC board. 840014 Kit........$12.45 or $11.95 ea./10+

Compact Power SuppliesThese compact power supplies incorporate an externally controlled currentcutoff circuit with an LED indicating current overload. Protected against shortcircuits and overloads.Compact Power Supply with Analog OutputThis power supply has an output of 30VDC @ 5A. 120/240V AC input. Its featuresinclude fine and coarse controls for voltage and current, and contains twoanalog meters. The supply incorporates an externally controlled current cutoff circuit withan LED indicating current overload. Protected against short circuits and overloads. 690047 ................................................................$157.95 or $142.15 ea./3+

Compact Power Supply with Digital OutputThis power supply has an output of 50VDC @ 3A. 120/240V AC input. Its featuresinclude fine and coarse controls for voltage and current, and contains two 3-digit LED Volt / Current meters.690046 ..................................................................................................$249

Find the KELVIN® DUAL POWER SUPPLY KIT in this chapter on pg. E4.

Page 31: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E31Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSMULTIMETERS

ORIGINAL IDEAS FROM KELVIN® has the BEST Prices on Multimeters!

Name 50LE Multimeter 101LE Multimeter 301LE MultimeterStock # 990177 841635 841603

FEATURES FEATURES FEATURES FEATURES

LCD Size 49x16mm 67x32mm 3.5 Digit, 1 in. H

Max. Display 1999 1999 1999

Low BatteryIndicator Yes Yes Yes

Overload Protection Yes Yes Yes

Diode Test Yes Yes Yes

Transistor Test Yes Yes Yes

Continuity BuzzerTest Yes Yes Yes

Square WaveOutput Yes No No

Auto Power Off No Yes Yes

Data Hold No Yes No

Power Supply 9V 6F22 battery 9V 6F22 battery 9V 6F22 battery

Product Size 124 x 70 x 26 mm 190 x 89 x 33 mm 188 x 91 x 32 mm

Product Weight @ 111 g @ 282 g

In The Box Meter, battery, holster, test lead, manual Meter, battery, holster, test lead, manual Meter, battery, holster, test lead, manualSPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS

DC V 200m-2000m-20-200-1000V, ±0.5% 200m-2-20-200-1000V, ±0.5 326m-3.26-32.6-326-1000V, ±0.5

AC V 200-750V, ±1.0% 200m-2-20-200-750V, ±1.0% 3.26-32.6-326-750, ±1.0%

DC/AC A 2000u-20m-200m-10A, ±1.8% 20u-200u-2m-20m-200m-2A-20A, ±1.8%326µ-3260µ-32.6m-326m-10A, ±1.8%

Resistance 200-2000-20K-200K-2000K Ohms, ±1.0% 200-2K-20K-200K-2M-20M Ohms, ±1.0% 326-326M Ohms, ±1.0%

Price $ 3.75 or 3.45 ea./5+ or 2.75 ea./10+ 19.95 or 18.95 ea./5+ or 17.95 ea./10+ 39.95 or 37.95 ea./5+ or 35.95 ea./10+

Page 32: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E32

KELVIN® EDUCATIONALELECTRONICS METERS

Student MetersThese student meters arerecommended for a variety of purposes. Meters feature±2.5% accuracy.

SIMPSON Multimeter – 27 Ranges– DC Volts: 0-0.25: 0-1: 0-2.5: 0-10: 0-50:

0-250: 0-500: 0-1000 – AC Volts: 0-2.5: 0-10: 0-50: 0-250: 0-500:

0-1000 DC mA: 0-1: 0-10: 0-100: 0-500 – Resistance: Rx1, 0-2000 ohms Rx 100, 0-

200 K-ohms Rx 10K, 0-20 mega-ohms– DC Amps: 0-10. – dB Scale: -20 to +/-50 Features include rugged taut-band movement.Varistor protected. Comes with test leads andoperating manual. 5-1/4 in. W x 7 in. H x 3-1/8in. D. 730001 #260-8 ..............$245 or $235 ea./3+

Simpson Multimeter w/ Overload All the features of 730001 in addition to a resetpush-button for releasing when overloadoccurs. Will not reset until overload iseliminated. 730002 #260-8P ............$295 or $285 ea./3+

SIMPSON Volt-Ohm-Milliameter Extra features, including drop-resistantconstruction, low power, ohms and additionalvoltage, current and resistance ranges. Extraranges and standard resistance ranges. With33 low power resistance ranges plus all thefeatures of the famous #260. Includes batteriesand leads.730010 #260-8XLMP ......$295 or $285 ea./3+

SIMPSON Test Leads with Alligator ClipsTest leads with screw-on alligator clips formodels #460-462, #464, #465, #260-7, #260-8, #270-5.730013 ................$38.95 or $34.95 ea./3+

Digital Multimeter Kit Build and use your own multimeter! This 100Kmultimeter will measure AC/DC voltage, DC current,resistance, continuity, diodes, batteries, and more!+/- 0.5% accuracy. Features a 3-1/2 digit LCD display,low battery warning plus a buzzer. Includes partsand a 50 page manual.840447 ..........................$24.95 or $22.95 ea./3+

Digital Clamp MeterLarge Digital/Analog Display. 3,200Count and 33 Segment Bar Graph.Auto/Manual Ranging Method.Backlighted Display. AudibleContinuity. Diode Test. AvailableContinuity Test. Data Hold. PeakHold. Includes Deluxe MoldedCarrying Case.• AC Voltage: 3/30/300V

|+1.0%, 750V +1.2%• DC Voltage: 3/30/300V

+0.8%, 1,000V +1.0%• AC Current: 300A +2.0%,

1,000A <600A +2.0%, >600A +3.0%• Resistance: 300W, 3kW, 30kW, 300kW, 3MW,

+1.5%, 30MW +2.0%• Frequency: 30kHz +2.0%

* NOTE: Digital meter has been designedaccording to IEC-1010-2-032 concerning safetyrequirement for hand-held current clamps forelectrical measurement and test.

720126 ........................$69.95 or $64.95 ea./10+

Analog Clamp MeterWith temperature measurement. TheMeter Lock Switch freezes measuredreading for closer examination atsafe location.• AC Voltage: 150V, 300V, 750V• DC Voltage: 60V• AC Current: 6A, 60A, 300A• Temperature: -20 to 150°C• Resistance: 1W, 10W, 30W,

300WIncludes a manual, test leads, anda carrying case. Requires a AA battery. 720127 ..........................$69.95 or $64.95 ea./3+

STOCK # TYPE V DC OHMS $ 1-9 $ 10+

660018 Voltmeter

0-30 2,400 10.95 9.95

660004 0-100 20K 10.95 9.95

990052 0-150 — 9.95 8.95

660017 0-300 — 14.95 13.95STOCK # TYPE A OHMS $ 1-9 $ 10+

660009

Am

meter

100mA 2 16.95 15.95

660002 0-10 0.2 11.95 10.95

660019 0-25 0.2 11.95 10.95

STOCK # TYPE V DC $ 1-2 $ 3+

710172 Voltmeter

0-3 9.95 9.45

710173 0-5 9.95 9.45

710174 0-10 9.95 9.45

710175 0-3 | 15 | 300 11.95 10.95STOCK # TYPE A $ 1-2 $ 3+

710176

Am

meter

0-1mA 9.95 9.45

710177 0-10 9.95 9.45

710178 0-1 9.95 9.45

710179 0-3 9.95 9.45

710180 0-10 9.95 9.45

Panel Mount MetersPanel mount meters require a 2 in. diameter hole.

Galvanometer -500 µA – 0 – 500 µA720135 ........................$29.95 or $26.95 ea./10+

Voltmeters 0-3V, 0-15V, 0-150V720132 DC ....................$29.95 or $26.95 ea./10+

Ammeter 0-50mA, 0-500mA, 0-5A720133 DC ....................$29.95 or $26.95 ea./10+

Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

Page 33: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E33Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSEQUIPMENT

Electronics Design WorkstationsIdeal for analog, digital, and microprocessor circuits. High and low buffered logic indicators. 8-channel logic monitor. [8] selectable logic switches. FunctionGenerator with continuously variable sine, square and triangle waveforms and TTL pulses. Triple output power supply offers fixed 5VDC supply plus two variableoutputs: +-1 to +-15VDC. Two open collector output pulsers. Audio experimentation speaker. Removable breadboard area and optional additional breadboardsocket plates. Multiple features in one complete test instrument saves hundreds of dollars needed for individual units.680067 Desktop Workstation ................................................................................................................................................................................................$433.50680117 Portable Workstation ....................................................................................................................................................................................................$482

Triple Output DC Power Supply with Digital Panel Meter Two Variable Output: 1.5 to 18V DC @0.5A. FixedOutput: +5V DC @ 1A. Isolated outputs can becombined to double voltage or current. Externalshort circuit protected.680111 ................................$225 or $205 ea./3+

Advanced Electronics TrainerTwo open collector output pulsers. With built-in multi-waveform function generator. Quad Voltage powersupply: 3 DC and 1 low voltage AC. Built-in logic probe with pulse capture. BCD to 7-segment decoder/display. 8-channel logic monitor.680118 ............................................................................................................................................$610

PoweredBreadboardsw/Power Supply+5.5V DC to +18VDC / -5.5V DC to -18V DC @ 0.5A 680119 ..........$180+12 to -12VDC @ 0.25A680014 ..........$203

Page 34: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E34 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS EQUIPMENT

Sine/Square/Audio Wave GeneratorWide range audio signal with sine/square wave simultaneous outputs. Has afrequency range of 20-200KHz square or 20Hz-2MHz sine.690044 [A] ......................................................................$225 or $195 ea./3+

RF Signal Generator 100KHz-150MHz. 6 ranges. 100mVrms. +/- 3% accuracy, with hi-lo switch andfine adjustment control. Includes test leads. 690045 [B] ......................................................................$225 or $195 ea./3+

Sweep Generator 0.02Hz-2MHz. Frequency control. Outputs for sine, triangle, square, pulse, rampslewed sine and TTL square waves.720098 ..........................................................................$295 or $275 ea./2+

Four-in-One Test StationFeatures: 100 KHz to 110 MHz RF Generator. 100 MHz, High Sensitivity Counterwith 5 Digit Display. 1 Hz to 1 MHz Function Generator. Variable 32V, 2A DCPower Supply with Adjustable Voltage and Current Limit. Digital Readout forVoltage or Current.680120 ..............................................................................................$1,300

Frequency Counter 10Hz-1GHz. Measures frequency, period and totalize. 8-digit LED display. 10ppmstability. 25mV sensitivity.720099 ..........................................................................$325 or $295 ea./3+

KELVIN® Kel-Function Frequency Generator KitReal test equipment for an electronic technician orhobbyist. Produces sine, triangle and square waveformswith frequency range between 100Hz to 100KHz.Includes an amplitude adjustment. Requires a 9V battery.Does not include enclosure, use #430202 (see bleow).841571 Kit ..........................$12.75 or $12.45 ea./10+842176 Teacher Demo Unit, Assembled/Tested........$69.95Polystyrene Enclosure with Lid/Screws4.40 x 2.40 x 1.10 in. 430202 ........................................$6.95 or $5.95 ea./10+

Capacitor Substitution Box 20 values: 100pF to 0.1mF. 280097 ....$24.95 or $22.95 ea./3+

Resistor Substitution Box24 Standard resistors from 1/2W.280096 ....$24.95 or $22.95 ea./3+

Resistor Substitution Box 1W, 1%; 1 to 11.111M in 1 Step 280095 ....$49.95 or $47.95 ea./3+

A

B

Page 35: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E35Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSEQUIPMENT

Digital Logic Probes 30ns Pulses. This logic probe features pulse memory.Comes with coiled power cord, ball-type power clipsand a 1 year warranty. 740087 25MHz ................$39.95 or $38.95 ea./3+740088 50MHz ................$59.95 or $54.95 ea./3+

25ns Logic Probe Audio and visual features, tests all logic families TTL/LS and CMOS/MOS digital circuits, color coded LEDsindicate high, low or pulsed logic states. The high speed logic probe is capable of capturing pulses of25nsec. Simultaneous tone output (high/low), 25MHz maximum input frequency.282444 ..............................................................................................................$21.95 or $19.95 ea./3+

2-in-1 Logic Probe & Pulser Combo This combo device simplifies troubleshooting and analyzing digital circuits.

282445 ..............................................................................................................$34.95 or $32.95 ea./3+

4 Digit Totalising CounterRuns on 1.3 - 1.7 VDC. Counting input and externalreset can be a contact closure or an open collectordevice. Has a 10 count per second max. countingrate. Digit height is 3/8".660075 ..........................$16.95 or $15.95 ea./3+

8 Digit Totalising CounterRuns on 2.7 - 3.3 VDC. Has high/low speed countinputs. Low speed counting input and external resetcan be a contact closure or an open collector device.High speed counting input can be a switch closureor TTL/CMOS device. Low speed counting input hasa max. rate of 30 counts/sec. and the high speedinput is 10,000 counts/sec. max. Digit height is 5/16".660076 ..........................$24.95 or $23.95 ea./3+

Pin Tip to Pin Tip Test Probes Pairs with Leads990021 [A] Red/Black..............$2.95 or 2.65 ea./3+

Banana Plug/Pin Tip Test Probes990066 [B] Red/Black............$3.15 or $2.85 ea./3+

Thermocouple Probe K-Type TestProbes720125 [C] Yellow ............$19.95 or $18.95 ea./3+

B

CA

Data Line Monitor and Mini Tester Identify interface problems. 8 LEDs monitor voltage,clocking or no signal present. Passive.120068 ............................$10.95 or $9.95 ea./3+

Logic Probe Specifications • Frequency Response: 50MHz• Detectable Pulse Width: 10ns• Logic Threshold: TTL Hi 2.3V, Lo 0.75V, CMOS Hi 60%

Vcc, Lo 15% Vcc, 7-18Vcc, Lo 40% Vcc• Input Impedance: 120kW• Operating Supply Voltage: 3-18V• Max. Input Protection: +70VAC/DC @ 15 s.• Power Supply Protection: +20V

Logic Pulser Specifications • Pulse Repetition Rate: 0.5/500Hz• Pulse Width: 10ms• Output Current: Pulser Mode @ 0.5Hz, 100mA sink/source,

Square Wave Mode @ 500Hz, 5mA sink/source• Sync Input Impedance: 1MW• Operating Supply Voltage: 5-15V• Max. Sync Input Protection: +120VDC @ 30 s.• Output Protection: +35VDC @ 30 s.• Power Supply Protection: +20VDC @ 30 s.

KELVIN®

Continuity Tester Kit Processes involved include: planning, identifyingparts, processing, manufacturing, cutting, drilling,shaping and assembly with the use of hand tools.Kit includes: solderless phone tip with 1/2 in. beveledspacer, spring, self tapping pan-head with fasteningscrews, PVC pipe, black test lead wire, alligator clips& locking brad pins. Requires [2] ‘AAA’ batteries(#220033).840645 ..$5.95 or $5.45 ea./10+ or $4.95 ea./50+

Industrial Continuity TesterAssembled. Requires AA batteries (#220016).340128 ..............................$6.95 or $6.45 ea./3+

Page 36: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E36 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS SOLDERING

WELLER 12W Pencil Thin Soldering Iron12W soldering iron is pencil thin. Ideal for reaching into those tight spots. Tiptemperature is 800°. Use Weller MP auto slide-in soldering iron tips.810054 ................................................................................$19.95 or $17.95 ea./6+

WELLER Pro Soldering Iron Top-quality, industrial-grade tools create a temperature of 750°. Stainless steel barrel. Long life, double-coatedtips. Popular pencil styling. Light blue handle with black heat shield.810010 25W Soldering Iron ..........................................$49.95 or $44.95 ea./3+810012 35W Soldering Iron ..........................................$49.95 or $44.95 ea./3+810011 1/16 in. Tip, #ST1 ..................................................$6.45 or $5.95 ea./6+810013 1/8 in. Tip, #ST3 ....................................................$6.45 or $5.95 ea./6+810014 1/32 in. Cone Tip, #ST7 $6.45 or $5.95 ea./6+

WELLER All-Purpose Soldering GunThis all-purpose soldering gun features built-in, pre-focused spotlight with pull of trigger. Pistol-grip, replaceable tip.810001 ....................................$48.95 or $44.95 ea./3+810003 Tips, 2/pkg. ........................$6.95 or $6.25 ea./6+

WELLER High Heat Soldering Gun 810007 200-260 Watts ..........................................................................$59.95810008 #7250 Tip ..........................................................$5.95 or $5.45 ea./6+810009 #7250N Tip ..........................................................$5.95 or $5.45 ea./6+

WELLER 80W Soldering IronIdeal for hobby work, stained glass and minor repairs. Soldering iron rest included.3/8"/10mm diameter replaceable iron-plated copper tip. 900°F/482°Ctemperature. Indicator light allows you to instantly see that the iron is on. 93/4"/247mm long.820051 ....................................................................$34.95 or $31.95 ea./3+

810002 25W Soldering Iron ..............................................$22.95 or $2195ea./6+810023 25W Chisel Tip, 2/pkg. ....................................................$5.45 or $4.95 ea./6+810004 25W Cone Tip ........................................................$2.95 or $2.69 ea./6+810005 40W Soldering Iron ..........................................$23.95 or $21.95 ea./6+810006 40W Chisel Tip, 2/pkg. ............................................$9.95 or $8.95 ea./6+

WELLER Marksman Soldering Kit 25W soldering iron, [3] copper tips, 40/60 solder, soldering aid and instructions.810029 ....................................................................$25.95 or $24.95 ea./3+

WELLER Marksman

Soldering Irons Featherweight (1-3/4 oz.)soldering iron is ideal for

reaching hard to get spots.Use 25W for PC board

work. Features replaceable tips.

WELLER SolderingIron Heaters

WELLER Soldering Iron Tips

WELLER Soldering Iron Handles

Student Soldering StationsElectronically controlled to provide variable

heat – 5 to 40 watts – for generalsoldering. Ideal for professionals,students, and hobbyists. The unit includes a soldering iron,

holder funnel for the iron, spongepad and an on/off indicator light.

Assembled Student Soldering Station282438..$35.95 or $33.95 ea./3+Solder Station Kit282439..$33.95 or $31.95 ea./3+

Ideal forProfessionals, Students and

Hobbyists!

5 to 40Watts

STOCK # DESCRIPTION $ 1-2 $ 3+

820036 2-Wire, Red, #7760 23.95 22.75820025 3-Wire, OSHA Grounded, #7500 39.95 34.95

STOCK # THREAD WATTS TEMP. F DIA. IN. MODEL # $ 1-2 $ 3+

820001 In 23W 700° 1/8 535S 24.95 22.95820007 In 33W 800° 1/8 235S 24.95 22.95820004 On 23W 700° 1/4 537S 24.95 22.95820009 On 33W 800° 1/4 1237S 24.95 22.95

STOCK # TYPE THREAD TIP TYPE DIA. IN. MODEL # PRICE 5+ PRICE

820010 Chisel In Copper 1/8 333 3.95 3.59820018 Chisel In Silver-Plated 1/8 PL333 5.95 5.30820016 Pencil In Silver-Plated 1/8 PL331 5.95 5.65820014 Chisel On Silver-Plated 1/4 PL113 6.95 6.45820015 L. Chisel On Silver-Plated 1/4 PL133 6.95 6.45820068 Pencil On Silver-Plated 1/4 PL138 7.95 7.15

WELLER ElectricSoldering Station

High-End Performance. Ideal for continuousproduction soldering or occasional use. New heater and

sensor design that allows for quick heat up and recovery.Temperature lockout and tip temperature offset ability come standard, asdoes an automatic shut off feature that extends tip, iron and station life.

810056 #WES51 ....................................................$129.95 or $119.95 ea./3+

Page 37: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E37Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSSOLDERING

60/40 Solder Pocket-PackNon-corrosive, resin flex core solder in a convenient dispenser pack. 1/2 oz.580022 ..........................................$1.95 or $1.85 ea./4+

Solder Paste 580052 50 grams ....................................................$2.29

Kester 60/40 SolderSpoolsEconomical solder features a non-corrosive,flux resin core. 1 lb. spools.580001 1/16 in. dia. ....$27.95 or $26.95 ea./4+580005 1/32 in. dia. ......$29.95 or $27.95 ea./4+

Weller Solder Mate HolderHolds 1 lb. Spool. Spool of solder not included.580046 ......................$13.95 or $11.95 ea./3+

Soldering Aids KitKit includes a Heat Sink, Fine Probe, Slotted Probe and Brush/Scraper.450032 ............$2.95 or $2.75 ea./10+

Solder Brush with Metal Bristles580043 ..$1.75 or $1.50 ea./3+

Project Soldering Iron 30W Soldering iron with 3/16" long tapered tip and break-resistant plastic handle. 117V, 60Hz (UL).990098 2-Prong Soldering Iron ..................................$4.95 or $4.65 ea./6+990099 2-Prong Soldering Iron Tip Only ....................................95¢ or 85¢ ea./12+990072 3-Prong Soldering Iron ......................................$12.95 or $11.65 ea./6+990117 3-Prong Soldering Iron Tip Only..............................$2.95 or $2.65 ea./12+

Project Soldering Iron Holder and Sponge Heavy-duty spring with bakelite support, steel base, and sponge pad. Soldering Iron Holder/Sponge830010 ....................$2.75 or $2.25 ea./10+Sponge Only990083 ..................................85¢ or 79¢ ea./10+

SAVE!

Heat SinksProtect heat-sensitive components from damage when soldering or desoldering leads.450034 Clip Heat Sink ....................79¢ or 69¢ ea./10+480024 TO-220 Snap-On Heat Sink ..69¢ or 59¢ ea./10+

Clip Heat Sink

Electric Desoldering Iron [A]Includes a cleaning wand.820083 ..$35.95 or $32.95 ea./3+

Desoldering Iron Tip Only820084 ......$4.95 or $4.45 ea./3+

Vacuum Desoldering Pump [B]All metal vacuum desoldering pumpfeatures one-hand operation.450030 ....$2.95 or $2.65 ea./6+

Desoldering Pump ESD-Safe580042 ..$35.95 or $32.95 ea./3+

Economy Desoldering Pumps [C][D]810058 Sm ..$2.95 or $2.75 ea./6+810057 Lg....$3.95 or $3.45 ea./6+

Desoldering Bulb[E]Economical! Includes a high heatresistant, removable tip for removingsolder, but without scratching ordamaging delicate PC boards.990084 ....$4.45 or $3.95 ea./6+

B

D

E

C

Desoldering Wick The easiest way to desolder PC board and terminal connections. 580009 0.150 in. W......$4.45 or $3.95 ea./6+580026 0.190 in. W......$4.65 or $4.25 ea./6+580037 0.050 in. W $27.95 or $25.19 ea./6+

Imported Quality 5 ft. Length580004 0 .075 in. W......$1.45 or $1.25 ea./6+580025 0.100 in. W......$1.45 or $1.25 ea./6+

A

WELLER Soldering Iron Holder810041 ......................................................................$29.95 or $25.95 ea./3+810042 Sponge Only ......................................................$1.95 or $1.75 ea./10+

Soldering Iron Holder 820020 ....................................................................$19.95 or $18.95 ea./3+

Klean Tip Soldering Iron Tray & Sponge820024 ........................................................................$10.95 or $9.95 ea./3+820038 Sponge Only ......................................................$4.59 or $4.13 ea./10+

Page 38: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E38 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS PC BOARDS

Instant Stripper Spray Non-flammable; safe on most plastics. 510006 [A] 12 oz. ......................................$16.95

Instant Chiller Spray Chills to -62 F (-52 C) in seconds. Will not harm plasticor printed circuit boards. 510004 [B] 10 oz. ..................$13.95 or $13.25 ea./3+

Cleaner / Lube Spray510001 [C] 10 oz. ....................$9.95 or $9.45 ea./3+

Dust Remover510058 [D] 10 oz. ....................$7.95 or $7.45 ea./3+

WD-40 Lubricant 870003 [E] 8 oz. ..................$6.95 or $6.25 ea./3+

870004 Gallon ....................$31.95 or $28.75 ea./3+

Transistor Silicon Grease 510002 [F] 6.5 g ..................$3.99 or $3.79 ea./3+

Goo GoneRemoves paint, grease, and sticky problems.870063 [G] 4 oz ......................$4.75 or $4.45 ea./3+

ProBond® Super Fast Epoxy Cement930012 [H] 0.5 oz. ..................$3.95 or $3.59 ea./6+

Copper-Plated Blank Circuit Boards 1 Side

Black Direct Etch Tape

Air Circulation & Agitation Pump450069 ..........................$12.95 or $11.95 ea./3+

Tank HeaterReduces the heating time when etching printed circuitboards. Comes with an adjustable thermostat.440143 ..........................$19.95 or $18.95 ea./6+

A B C D E F G H

AmmoniumPersulfateEconomical!Ammonium SulfateEtchant powderfeatures an indefiniteshelf life. Mix withwater as needed; 4 lbs. makes up to 2 gallonsof 20% solution. 4 lbs.440026 ......................$17.95 or $16.19 ea./3+

Ferric ChlorideFast-Acting! FerricChloride Etchantpowder worksquickly andefficiently asneeded. One lb.makes a half-gallon, 2 lbs. makes a gallon.440139 1 lb. ................$16.95 or $14.95 ea./3+440140 2 lb. ................$21.95 or $20.95 ea./3+

PCB Etch Resist Pens440116 1/64 in. dia. Point ........$3.45 or $3.25 ea./6+440115 1/32 in. dia. Point ......$3.95 or $2.95 ea./6+

STOCK # H in. W in. L in. OZ. $ 1-9 $ 10+

4406231/32

6 5 — 5.99 5.45440624 6 9 — 9.99 9.45STOCK # H in. W in. L in. OZ. $ 1-9 $ 10+

440001

1/16

3 2-1/2 1 1.69 1.52440002 6 4-1/2 1 3.65 3.28440003 7 5 1 5.95 5.35440004 12 9 1 13.95 12.55440014 15-1/2 7-1/2 1 10.95 9.85440013 3/4 2-1/2 1 7.95 7.15440065 36 34 1 76.95 69.25

STOCK # W in. L ft. $ 1-5 $ 6+

440058 1/64 54 3.95 3.45440006 3/32 54 4.25 3.95440008 1/32 54 4.45 4.25440009 1/16 54 5.95 5.45440010 1/8 54 5.95 5.45440007 1/4 54 6.25 5.95

Fast Etching Tank This tank will etch in only 4 minutes! Includes anelectric agitator and hanging accessories. 160 x250mm maximum PC board size. Requires a tankheater (#440143 to the right).440142 ........................$89.95 or $85.45 ea./2+

Etching Tank PartsCombine the followingparts to make your owneconomical etching tank.

Toner Transfer System Laser print schematic designs onto water-solublepaper before etching. Paper can be removed withoutdamaging line art. 10/pkg.440200 ........................$19.95 or $18.95 ea./3+

Press-n-Peel Transfer FilmPhotocopy or laser print circuit designs onto Press-N-Peel Film. Iron the film onto copper clad board andpeel it off before etching. [5] 8.5x11 in. sheets.440198 ........................$12.95 or $11.95 ea./6+

Page 39: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E39Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSTOOL SETS

With Xcelite, Weller and Miller Tools

Beginner Set

PROFESSIONAL Set

Basic Tool Case Large zipper canvas case with handles. This canvas case is lightweight butdurable enough to hold a meter, soldering, tools, etc. 14-3/4"x9"x2-1/4".490060 ....................................................................$24.95 or $22.95 ea./3+

Deluxe Tool CaseMetal reinforced tool case with metal handle, locks, tool pallet, meter ramp anddividers. Ideal for the technician. 18"x13"x7".490061 ....................................................................$59.95 or $56.95 ea./3+

840074 ....................................................................$99.95 or $94.95 ea./3+

Professional Tool Set

• [2] Slotted Screwdrivers • [2] Phillips Screwdrivers• Diagonal Cutter • Nose Pliers• Slip Joint Pliers • Nut Driver

• Miller Wire Stripper/Cutter • Soldering Iron• 2.5 oz. Resin Core Solder • BONUS: Tool Box (with twin

latches, removable tray andpadlock eye)

Electronics Tool Set

840213 ....................................................................$23.95 or $21.55 ea./6+

• 30W Soldering Iron• Sponge Pad• Mini-Nose Pliers

• Diagonal Cutters• Wire Stripper/Cutter

• Slotted Screwdriver• Phillips Screwdriver

Multi-Purpose Tool Set• Stubby Slotted Head Screwdriver

• [2] Slotted Screwdrivers• [2] Phillips Screwdrivers• Wire Stripper• Long Nose Pliers

with Side Cutter• Combination Pliers• Adjustable Wrench• Hex Nut Driver• Tape Rule• Tool Box530159 ...$120 or $108 ea./3+

AKRO-MILLSTool BoxesLightweight Tool BoxLightweight tool box with tray. Smallcompact size makes it ideal for carryingit around the lab to your projects. 13 x 7 x 6 in.430038 ..........$7.95 or $7.15 ea./6+

Heavy-Duty Tool Box This durable hevy-duty tool box canhold up to 60 lbs. of tools, parts andequipment. The tool box features asure-lock latch, lift out tray & padlockeye. 16 x 8 x 7 in.430033 ....$16.95 or $15.95 ea./6+

General Set

Page 40: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E40 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS TOOLS

AB

C

D

A

A B C

DF

E

GH

BF

CD

EG

H

STOCK # FIG. L in. $ 1-5 $ 6+

520023 A 4-1/2 3.45 2.95520303 B 6 5.95 5.45520022 B 6-1/2 4.95 3.95

Diagonal CuttersCan be used for most electronics worksuch as cutting wire and pc boards.

STOCK # FIG. L in. FEATURES $ 1-5 $ 6+

520021 A 4-1/2 Cutter, Serrated Jaws 3.25 2.95520020 B 6 Cutter, Serrated Jaws 5.95 4.45530146 B 6 Curved 22.95 21.95

Long Nose Pliers

STOCK # FIG. L in. FEATURES $ 1-5 $ 6+

530114 C 7-1/2 CRESCENT, Serrated Jaws 19.95 18.95530028 D 8 XCELITE, Serrated Jaws 24.95 22.95

Chain Nose Pliers

STOCK # FIG. L in. FEATURES $ 1-5 $ 6+

530001 D 4 Submini 17.95 15.95850457 E 5 Cutter, Serrated Jaws 19.95 18.95530144 F 5-1/2 Cutter, Serrated Jaws 20.95 18.95530014 G 6 Cutter, Serrated Jaws 22.95 20.95530145 H 6 Extra Long Jaws 26.95 24.25

XCELITE Long Nose Pliers

STOCK # FIG. L in. $ 1-5 $ 6+

530002 C 4 19.95 18.95530110 D 5 20.95 19.95530013 E 6 21.95 20.95

XCELITE Diagonal CuttersWith beveled edges, forged alloy steelconstruction and precision machining.

STOCK # FIG. L in. $ 1-5 $ 6+

520026 A 7 5.95 5.50530015 A 8 8.95 8.45

Electrician’s Pliers For cutting or twisting wire or removingmetal box knockouts.

STOCK # FIG. L in. $ 1-5 $ 6+

520001 B 6 3.95 3.79520164 B 8 4.95 4.45

Slip Joint Pliers Versatile, heavy duty pliers with a wirecutter for your electrical needs.

Xcelite Heavy Duty Diagonal Pliers530026 [F] 7 in. ........................................................$19.95 or $18.95 ea./6+

XCELITE ShearcutterFlush cuts soft wire up to 20AWG (0.8mm). Static-dissapative grips. 530091 [G] 5 in. ..............................................................$9.95 or $8.95 ea./6+820077 {H] 5 in. w/ Safety Clip to Reduce Flying Debris ......$12.95 or $10.95 ea./6+

Wire Brush Heavy-duty wire brush can be used for cleaning circuit boards and metal. 520009 [E] 10 in. Long................................................................$1.95 or $1.75 ea./6+

Acid BrushesFor working with PC boards.580044 [F] 1/4 in. Wide, 100/pkg. ..............................................$2.95 or $2.75 ea./6+580045 [F] 3/8 in. Wide, 100/pkg. ..............................................$2.95 or $2.75 ea./6+Find X-ACTO® KNIVES in the PROJECT TOOLS chapter on pg. PT5.

Page 41: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E41Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSTOOLS

EF

H

Economy Wire StripperFor stranded and solid wires up to 10AWG (2.6mm).520298 [A] ....................................................................$3.95 or $3.55 ea./6+

Premium Wire StripperAll-purpose wire stripper, cutter, pliers, and crimper. Cushion grip. AWG 16 - 26. 520302 [B] 6 in. ..............................................................$7.95 or $7.45 ea./6+

Coaxial Cable Stripper3-step coaxial cable stripper. Strips RG/U 6, 58, 59, 62 and 3C2V, 5C2V. 520301 [C] $16.95 or $15.95 ea./6+

Round Cable CutterCuts multi-conductor cable up to 1/2 in. and solid or stranded wire up to 8 AWG.Spring return with safety lock.520300 [D] ....................................................................$7.95 or $6.95 ea./6+

A

C

D

STOCK # FIG. L in. FEATURES $ 1-5 $ 6+

480001 L 5-1/2 Straight Tips 2.95 2.75480006 L 6-1/4 Straight Tips 3.95 3.45480004 M 5-1/2 Curved Tips 3.95 3.45480007 M 6-1/4 Curved Tips 4.95 3.95

Locking Forceps Use to select and position delicate and small parts. Ideal for precision work.

MILLER Wire Stripper/CuttersFor stranded and solid wires up to 10AWG (2.6mm). 520010 [E] w/Adjustable Stop, #101 ..............................$13.95 or $12.60 ea./6+520011 [E] w/Adjustable Stop & Spring, #101-S ................$14.95 or $13.50 ea./6+520159 [E] w/ Extruded Cam & Spring, #103-S..................$15.95 or $15.15 ea./6+

Strip-Er-ClipEconomical precision tool with safeguard to prevent cuts. 8-stop gauge can beused to cut 12-26 AWG wire to any length.520207 [F] ....................................................................$4.29 or $3.86 ea./6+

Self-Adjusting Wire Stripper/CutterUse for stripping insulation from 0.2-6mm wire. Maximum strip length is 25mm. 520069 [G] ..............................................................$17.95 or $16.20 ea./6+

Automatic Wire Stripper This automatic wire stripper holds the wire in place while the blade strips offthe insulation. Use to strip 12 to 22 gauge wire. 520194 [H] ..............................................................$24.95 or $22.95 ea./6+

L M

Inch Crimping Tool & Wire StripperCrimps insulated and non-insulated lugs. Strips 10 to 22AWG solid and stranded wire. Cuts bolts from #4 to #10.520002 [A] ..........................................................$3.19 or $2.89 ea./6+

KLEIN Crimping PlierAll-purpose tool crimps insulated and non-insulated lugs. Strips 8-22AWGsolid and 10-26AWG stranded wire. Cuts bolts from #4-#10. 520206 [B] High Quality, #1001 ............................$20.95 or $19.95 ea./6+

Modular Crimping ToolCuts, strips, and crimps modular plugs 8P/RJ45 and 6P/RJ12, RJ11. 520299 [C] Cushion Grip, 7-1/2 in. ........................$29.95 or $27.95 ea./6+

BG

A

B C

Tweezers Ideal for picking up small components in hard to reach places as well as assemblyon pc boards. Made of durable stainless steel.480002 [I] Straight, 6 in. ............................................................$2.95 or $2.80 ea./6+480008 {J] Soldering, Self-Closing, Curved Tip ......................$4.95 or $4.40 ea./6+

Pick SetsFor precision work such as scribing, marking, seperating, positioning and counting.Hardened, tempered stainless steel.670025 [K] ....................................................................$5.95 or $4.95 ea./6+

I

J

K

Find ELECTRONICPARTS in this chapter

starting on pg. 44.

Page 42: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E42 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS WORK CENTERS

Circuit Board Holder HeadAccommodates PC boards of anyshape and size, from 1/8 in. (3mm) to12 in. (308mm) wide and 5/32 in.(4mm) thick. Arms moveindependently and may bepositioned adjacent to eachother. Fits all 300 series bases. Thestem is 5/8 in. (16mm) in dia. Overallheight (including stem) is 10 7/8 in. (279mm).540007 ..........$36.95 or $33.95 ea./3+

Standard BaseThe patented single load control knob and exclusivesplit-ball feature firmly lock the head into place.Holds all 300 series heads. This base has three1/4 in. (6mm) countersunk mounting holes ona 4 5/16 in. (111mm) bolt circle for attachingdirectly to a work bench or to a portable BaseMount. Accepts all 5/8 in. (16mm) stems.Overall height is 3-3/4 in. (96mm).540001 ............$24.95 or $22.95 ea./3+

Low-Profile BaseThis base has all the tilt, turn and rotate controlfeatures of the Standard Base, but it’s only 2-1/2in. high. Designed for working close to the benchsurface. Holds all 300 series heads. This basehas three 1/4 in. (6mm) countersunk mountingholes on a 4-5/16 in. (111mm) bolt circlefor attaching directly to a work bench orto a portable Base Mount. Accepts all5/8 in. (16mm) stems.540002 ....................................................................$23.95 or $21.95 ea./3+

Weighted Base MountThe husky, cast iron 308 Base Mount weighs 5lbs.(2.3kg), making it compact and stable. Included are four non-marring, anti-skid neoprene base pads. Two 1/4 - 20 holes are drilled and tappedon the side extension for conveniently mountingthe accessories. Three screws and nuts areincluded for mounting a base to the WeightedBase Mount.540004 ..........................$29.95 or $27.95 ea./3+

Bench Clamp Base MountThe 311 Bench Clamp Base Mount clamps to the edge of any work bench or table up to 3-7/16 in. (88mm) thick. For use with the 300 StandardBase and the 305 Low-Profile Base. Fourneoprene pads are included and may be used when additional anti-slip characteristics are desired without excessive tightening of the clamping screw. Three screws and nuts are included for mounting a base to the Bench Clamp.540003 ....................................................................$39.95 or $37.95 ea./3+

Standard HeadFits all 300 series bases. Jawsopen to 2-1/4 in. (58mm).Jaws are 2-1/2 in. wide(64mm). The stem is 2-1/8 in.(54mm) long and 5/8 in.(16mm) in diameter. Nylonjaws have a satin finish toimprove grip. Steel, brass,Teflon and grooved nylon jawsare available as accessories for this head. As ageneral purpose head, you can’t go wrong with itsexceptional strength and quality.540005 ....................................................................$29.95 or $27.95 ea./3+

Rapid Assembly PC Board HolderFeatures an eightposition rotating adjustment and six positive lockpositions inthe verticalplane. Springloaded, this modelfeatures tilt angleadjustment, height adjustment, andquick board rotation for componentinsertion and soldering. 6 lbs. 7 oz. (2.9kg). Heightfrom base to top of vertical shaft is 10 in.(25.4cm).540011 ..........................$79.95 or $74.95 ea./3+

Multi-PurposeWork CenterThis is one of the most versatile combinations, perfect for home or hobby needs. Start with a 376 Self-Centering Extra-Wide Opening Head, include the 300 Standard Base, and finish off withthe 312 Parts Tray Base Mount. The 350 Multi-PurposeWork Center stands 7-7/8 in. (201mm) tall andweighs 5lbs. (2.3kg).540010 ..........................$89.95 or $84.95 ea./3+

Standard Head & Vacuum BaseThe 381 Vacuum Base PanaVise is a combination of the 380 Vacuum Base and the 303 Standard Head. A half turn of the mount lever attaches or releases thepowerful suction pad and allows rapid set-ups in a variety of locations (for useon smooth, non-porous surfaces only). Thiscombination stands 6-1/8 in. (157mm) tall and weighs2lbs. 13oz. (1.3kg).540009 ..........................$69.95 or $64.95 ea./3+

WideOpeningHeadA versatile,general purpose electronicshead created especially for productionlines, technicians, and designers. Jaws opento 6 in. (164mm) and fits most PC boardsin its molded, deep-ribbed neoprene jaw pads. When pads are reversed, thewide “V” can be used for securing delicate items, such as tuners, coils, motorarmatures, etc. The jaw’s control knob is micro-adjustable so it exerts the exactamount of pressure you need. Fits all 300 series bases The stem is 2-1/4 in.(58mm) long and 5/8 in. (16mm) in diameter. Overall height is 5-1/8 in. (131mm).540006 ....................................................................$37.95 or $34.95 ea./3+

Page 43: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E43Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSWORK CENTERS

PCB Holder and Work CenterComplete work center for PC boards. Sturdy base with non-tip bars. Cushioned jaws and a cushioned arm hold pc boards in place as you work. The pc board can be rotated 360˚; allowing work to be done at any angle.810055 ..................................................................................$59.95 or $57.95 ea./3+

Helping Hand Frees hands for soldering withtwo adjustable arms withalligator clip jaws. Six lockingball joints permit hands-freeoperation and a heavy basethat prevents tipping. Use ina vise or clamped to a workbench.470058 ....................$3.35

or $2.95 ea./6+

Fluorescent Magnifier Lamp Beige lamp with a precision magnifying lens(up to 3X). Sturdy spring balance arm has an extended reach of 45 in. long. Comes with a 22 watt fluorescent circline bulb. (Not Luxo brand).210101 ............$59.95

or $54.95 ea./3+

Magnifier Glasses Binocular style. 2.5X. Adjustable.240002 ......................$19.95 or $18.95 ea./3+

STOCK # DIA. in. L ft. $ 1-9 $ 10+

330078 1/8 10 2.95 2.75330079 3/16 10 2.95 2.75330080 1/4 10 5.45 4.95330081 5/16 10 6.95 6.45330371 1/2 10 6.95 6.45330409 3/4 4 6.95 6.45

Heat Shrink Tubing Shrinks to 50% of inside diameter.

Heat Gun Top quality gun with dualtemperature and 6 ft. longcord. 1000 watts.820054 ............$69.95

or $64.95 ea./3+

Utility BoxesIdeal for storing and organizing all of your components, small parts, and more in the classroom. The boxes include two removable dividers.430027 Utility Box, 3-18 Drawers ..............................$5.95 or $5.45 ea./3+

Storage CabinetsFor organizing and storing electronic supplies and parts in addition toother small parts in your classroom.430074 Storage Cabinet, 26 Drawers ......................$34.95 or $31.45 ea./3+430073 Storage Cabinet, 64 Drawers ......................$39.95 or $37.95 ea./3+

Utility Box

Storage Cabinet

Page 44: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E44 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS PROTOTYPING

$395As Low As

Per 3+

BreadboardsSuitable for a variety of prototyping needs and circuit design. These solderlessbreadboards accept most electronic components including integrated circuitsand transistors for digital and/or analog circuitry.

General Purpose Boards Multi-purpose boards with pre drilledholes. Accept DIPs, sockets, headers.Indexed for pin-out ID. These boardsare a convenient and economicalway to assemble circuit components.Good for circuit design work.

Prototyping Boards

Wire Jumper Kit Kit includes Quick Test Sockets, Bus Strips and 22-Gauge Wire (pre-cut, pre-stripped and color-coded).330289 140 Piece Kit ......................................................$4.95 or $4.45 ea./3+330290 350 Piece Kit ..................................................$13.95 or $13.25 ea./3+

Fahnestock Spring ClipsBrass and nickel-plated clips for prototyping andcircuit design work. Small clip is 19/32 x 7/32 x 1/4in. with a 3/32 in. diameter hole. Large clip measures3/4 x 5/16 x 3/8 in. with a 1/8 in. dia. hole.390059 Small, 100/pkg. ..........$15.95 or $14.35 ea./6+390060 Large, 10/pkg. ..............$5.95 or $5.35 ea./10+

Stackable Banana Plugs SetFor prototyping & circuit design. 2mm with Leads. Thisset of 10 plugs with leads includes half in yellow andhalf in white.990136 10/pkg. ................$29.95 or $26.95 ea./3+

Quick Connect Tabs Use insulated tabs for working with 14-gauge and 18-gauge wire.390191 Female, 59/64 in. , 100/pkg. ................................$29.95 or $27.95 ea./3+

Stackable Banana Plugs 990131 Black, 4mm Dia.....................99¢ or 89¢ ea./10+990132 Red, 4mm Dia. ..............$2.49 or $2.39 ea./10+990135 White, 4mm Dia. ..................99¢ or 89¢ ea./10+

Stackable Banana Plugs/Leads 4mm990129 Black, 20 in. L ....................................................$2.95 or $2.75 ea./10+990130 Red, 20 in. L ......................................................$2.95 or $2.75 ea./10+

Solderless Banana PlugsIncludes mounting screw. Measures 1-5/8 in. L.400016 Red .................... $4.25 or $3.95 ea./10+400017 Black .................. $4.25 or $3.95 ea./10+

Spacer Supports Use for breadboards and PCboards. Requires a 3/16 in. dia.mounting hole.

$395As Low As

Per 3+

IC Clips OnlySolder-type clips are spring loaded.990105 Red ..............65¢ ea./4+ or 60¢ ea./25+990104 Black ..................65¢ ea./4+ or 60¢ ea./25+

STOCK # FIG. CONTACTS BINDING POSTS FEATURES $ 1-2 $ 3+

680093 A 400 0 — 5.95 5.65680094 B 100 0 2 Pieces 3.95 3.45680095 C 640 0 — 5.95 5.45680096 D 740 0 — 7.45 8.95680097 E 840 0 Large 8.95 7.95

STOCK # SIZE in. HOLES FEATURES $ 1-5 $ 6+

440209 2-27/32 x 1-27/32 356 Solder-Ringed 2.75 2.45440208 3-3/4 x 2-3/4 750 Solder-Ringed 4.25 3.95440207 6-5/8 x 4-1/2 2200 Solder-Ringed 8.95 7.95440066 6 x 2 x 0.062 — Phenolic 2.45 2.25440067 6-1/2 x 4-1/2 x 0.062 — Phenolic 8.15 7.95440129 17 x 6 x 0.047 — Phenolic 15.95 13.95

STOCK # FIG. CONTACTS BINDING POSTS FEATURES $ 1-2 $ 3+

680030 A 840 3 Proto-Board 10 29.95 27.95680098 B 1380 2 — 15.95 14.95680099 C 1580 3 — 17.95 16.95680100 D 2390 4 — 29.95 27.95

STOCK # DIA. in. L in. $ EA. $ 100+

390366 5/32 1/4 .29 .25390367 5/32 1/2 .29 .25390368 5/32 3/4 .29 .25390369 5/32 1 .35 .30

A

A

B C D

B C D E

Page 45: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E45Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSWIRE

Bell Wire [C]

Speaker Wire [H]

Copper Enamel Magnet Wire [B]

22 AWG Project Wire Ends Stripped. [J]

STOCK # TYPE AWG COLOR $ 1-2 $ 3+

330247

Solid

14

Black 95.00 93.00

330259 Green 95.00 93.00

330260 Red 95.00 93.00

330261 White 95.00 93.00

330101

12

White 115.00 105.00

330248 Black 115.00 105.00

330263 Red 115.00 105.00

330262 Green 115.00 105.00STOCK # TYPE AWG COLOR $ 1-2 $ 3+

330250

Stranded

14

Black 125.00 115.00

330268 Green 125.00 115.00

330269 Red 125.00 115.00

330270 White 125.00 115.00

330251

12

Black 150.00 140.00

330271 Green 150.00 140.00

330272 Red 150.00 140.00

330273 White 150.00 140.00

SOLID STOCK # AWG COLOR L ft. $ 1-2 $ 3+

330343 18 Bare 50 13.95 12.95STRANDED

STOCK # AWG COLOR $ 1-2 $ 3+

33005020

White 1000 69.95 62.95

330044 Brown 1000 69.95 62.95

STOCK # W lbs. AWG L ft. $ 1-2 $ 3+

330128

1

22 514 14.95 13.95

330130 24 817 15.95 14.95

330132 26 1300 15.95 14.95

330134 28 2067 16.95 15.95

330136 30 3287 16.95 15.95STOCK # AWG COLOR $ 1-2 $ 3+

330036

10

18 2030 125.00120.00

330037 20 3230 128.00123.00

330038 22 5140 128.00123.00

330039 24 8170 130.00125.00

330040 26 13000 135.00125.00

330041 28 20670 140.00135.00

THHN Building Wire 500 ft. Long [E] [F]

STOCK # TYPE COLOR L ft. $ 1-2 $ 3+

330193

Solid

Red 100 7.95 6.95

330017 Red 1000 39.95 37.95

330208 Black 100 7.95 6.95

330011 Black 1000 39.95 37.95

330192 Blue 100 7.95 6.95

330012 Blue 1000 39.95 37.95

330209 Brown 100 7.95 6.95

330013 Brown 1000 39.95 37.95

330210 Green 100 7.95 6.95

330014 Green 1000 39.95 37.95

330211 Gray 100 7.95 6.95

330015 Gray 1000 39.95 37.95

330213 Violet 100 7.95 6.95

330018 Violet 1000 39.95 37.95

330214 White 100 7.95 6.95

330019 White 1000 39.95 37.95

330194 Yellow 100 7.95 6.95

330020 Yellow 1000 39.95 37.95

330212 Orange 100 7.95 6.95

330016 Orange 1000 39.95 37.95STOCK # TYPE COLOR L ft. $ 1-2 $ 3+

330032

Stranded

Red 1000 51.95 46.75

330026 Black 1000 51.95 46.75

330027 Blue 1000 51.95 46.75

330028 Brown 1000 51.95 46.75

330029 Green 1000 51.95 46.75

330030 Gray 1000 51.95 46.75

330033 Violet 1000 51.95 46.75

330034 White 1000 51.95 46.75

330035 Yellow 1000 51.95 46.75

330031 Orange 1000 51.95 46.75

22 AWG Wire [K]

Copper Wire [A]

A B C D E F

★ PLEASE NOTE: Copper prices fluctuate and are subject to change at timeof order. We will notify you if there is more than a 10% increase in price.

Zip Cords [I]Stranded cord is heavy-duty vinyl. 18/2 and 16/3 areUL-listed. 16/3 is also SJT-type.

STOCK # TYPE AWG COLOR L ft. IW $ ea.

330365

Solid 18

Red 100 PVC 9.95

330366 Black 100 PVC 9.95

330367 Brown 100 PVC 9.95

330368 Yellow 100 PVC 9.95

330118 Red 1000 PVC 79.95

330116 Black 1000 PVC 79.95

330117 Brown 1000 PVC 79.95

330364 Yellow 1000 PVC 79.95

STOCK # AWG COLOR L ft. $ 1-9 $ 10+

330122 20/2 Clear 250 34.95 31.45STOCK # AWG COLOR L ft. $ 1-9 $ 10+

330152 18/2 White 250 34.95 32.95

330010 18/2 Black 250 34.95 32.95

330119 18/2 Brown 250 34.95 32.95

330120 18/2 Clear 250 34.95 32.95STOCK # AWG COLOR L ft. $ 1-9 $ 10+

330082 16/3 Black 250 194.00 174.95

STOCK # AWG COLOR L ft. $ 1-2 $ 3+

330154 24 Clear 25 3.95 3.65

330155 24 Clear 50 10.95 9.85

Phone Wire [G]

STOCK # DESCRIPTION L ft. $ 1-2 $ 3+

860025 4 wires for 2 lines 50 3.95 3.65

Test Lead Wire [D]

STOCK # kV AWG COLOR L ft. IW $ ea.

330007

5

18 Red 100 PVC 25.95

330008 Black 100 PVC 25.95

330167 Black 1000 PVC 249.00STOCK # kV AWG COLOR L ft. IW $ ea.

33011810 18

Red 50 Rubber 12.95

330116 Black 50 Rubber 12.95

SOLID STOCK # COLOR L in. QTY. $ 1-2 $ 3+

330425 Red 10 50 7.95 6.95

330426 Black 10 50 7.95 6.95STRANDED

STOCK # COLOR L in. QTY. $ 1-2 $ 3+

330427 Red 10 50 7.95 6.95

330428 Black 10 50 7.95 6.95

H I K

G J

Page 46: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E46 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS PROJECT BOXES

Project Cases [A] These clear plastic cases are ideal for your electronicprojects and storage! Plastic cover snaps off for yourworking convenience.

Instrument Cases [B] Bakelite black gloss instrument cases with 1/8 in.wall thickness. Outside dimensions listed. Plasticmatching cover panels for Instrument The cases are pre-drilled. Screws are sold separately (#390005or 390011).

Metal Cases [D] Sturdy two-piece construction. Top is made of 0.040in. thick steel with a black finish. Front and bottomis made of #20 gauge aluminum. Louvered on both sides for ventilation. Cover and feet held onwith screws.

STOCK # L x W x H in. $ 1-19 $ 20+

430014 2-1/8 x 1-5/8 x 1 .35 .25

430015 2-7/8 x 1-3/16 x 1 .38 .29

430016 2-7/8 x 2 x 1 .40 .30

430017 3-1/2 x 2-9/16 x 1 .69 .62

430018 4-3/8 x 2-1/16 x 1-1/6 .59 .48

430019 4-5/8 x 3-1/2 x 1-1/4 1.40 1.26

430064 4-5/8 x 3-1/2 x 1-3/4 1.49 1.39

STOCK # L x W x H in. $ 1-19 $ 20+

430007 4 x 2-7/8 x 1-5/6 3.95 3.39

430008 For Stock #430007 1.89 1.60

430001 5-7/8 x 3-1/8 x 2-1/4 9.95 8.95

430003 For Stock #430001 1.75 1.60

430040 6-1/4 x 3-3/4 x 2 9.95 8.95

430006 For Stock #430040 3.95 3.75

430002 6-13/16 x 5-1/4 x 2-5/16 6.95 6.45

430004 For Stock #430002 4.95 4.45

430039 8-3/8 x 7-7/16 x 3-1/16 29.95 26.95

430005 For Stock #430039 13.95 12.55

STOCK # L x W x H in. $ 1-2 $ 3+

990058 3-1/4 x 2-3/16 11.95 10.95

990059 4 x 2-3/8 x 5-7/8 17.95 15.95

990060 5-1/4 x 3 x 5-7/8 18.95 16.95

STOCK # COLOR L x W x H in. $ 1-4 $ 5+

390172 Gray

1/2 sq. x 15/64 12.85 10.95

390174 3/4 sq. x 5/16 19.95 16.95

390145 5/8 dia. x 11/32 19.95 16.95STOCK # COLOR L x W x H in. $ 1-4 $ 5+

390175 Black

1/2 sq. x 15/64 19.95 16.95

390176 3/4 sq. x 5/16 19.95 16.95

390173 5/8 dia. x 11/32 33.95 30.95U-Chassis Blank Aluminum [E]

STOCK # GA. L x W x H in. $ 1-5 $ 6+

230001 16 5 x 5 x 2 2.45 2.25

230006 14 11 x 7 x 2 5.95 5.45

STOCK # FIG. L x W x H in. $ 1-5 $ 6+

430182 K 3 x 2 x 1 3.95 3.45

430184 L 6 x 3 x 2 7.95 7.45

430187 M 7 x 5 x 3 11.95 10.95

STOCK # L x W x H in. $ 1-9 $ 10+

430201 3.90 x 2.00 x 0.80 5.95 4.95

430202 4.40 x 2.40 x 1.10 6.95 5.95

430203 4.70 x 2.60 x 1.40 6.95 5.95

430204 5.90 x 3.20 x 1.80 9.95 8.95

430205 7.50 x 4.30 x 2.20 10.95 9.95

IR Transmitter Enclosure [F]Open ended enclosure ideal to house an infraredtransmitter or remote control. Includes a batterycompartment for a 9V battery (not included).Measures 4.6 x 2-3/4 x 1 in. Red lens end panel soldseparately (see below).430167 Enclosure ..................$7.95 or $7.25 ea./6+430177 Red Filter Lens End Panel......................$3.50

Test Equipment Case [G]Has a cutout for a LCD or LED display. Includesinternal mounting bosses for display and PC boards.Contains a battery compartment for [4] AA batteries.7-5/8 x 3-15/16 x 1-3/8 in. 430141 ..........................$34.95 or $29.95 ea./6+

Adhesive Feet [J]Self-sticking feet are ideal for your project cases.Made of polyurethane polymer. 100/pkg.

K

L

M

ABS Boxes with Aluminum and Plastic Tops

Polystyrene Plastic Enclosures [C] Suited for mounting printed circuit boards. Integralcard guides accept 1.5 mm (0.062 in.) P.C. cards.Wall thickness is 0.150 in. Lid secured with self-tapping #4 x 0.5 in. Phillips screws.

A

B

C

D

E

F G

H

I

J

Logic Probe Case / Hardware [H] 430068 5-3/4 x 3/4 x 1-1/8 in. $3.75 or $3.45 ea./10+

Plug Cord [I] 330314 4.71 in. long ............$2.45 or $2.25 ea./10+

Page 47: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E47Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSPROJECT PARTS

STOCK # TYPE FIG. SIZE in. V $ 1-9 $ 10+

120246 Fan A3 x 3 125 DC 3.95 3.45

120254 4 x 4 115 AC 18.95 16.95STOCK # TYPE FIG. SIZE in. V $ 1-9 $ 10+

120253

Guard B

3 x 3 — 1.95 1.65

120252 4 x 4 — 2.45 2.25

A B

A B

C D

E F G H

Project Case FansKeep electronic circuitry cool with these fans that fit into project cases.

STOCK # FIG. Type MOUNT D in. SHAFT D in. COLOR $ 1-24 $ 25+

300002 A Instrument Set Screw 11/16 1/8 Black .99 .85

990039 B Skirted Instrument Set Screw 15/16 1/4 Black .85 .75

300006 C Instrument Split Knurl 3/4 1/4 Black .85 .75

300007 D Instrument Split Knurl 1 1/4 Black .85 .75

990075 E Instrument — 1/2 1/4 Red 1.75 1.55

990078 F Instrument — 1/2 1/4 Blue 1.25 .95

990080 E Instrument — 3/4 1/4 Red 1.65 1.45

990082 F Instrument — 3/4 1/4 Blue 1.65 1.45

990020 G Pointer Set Screw 1-1/4 1/4 Black 1.35 1.25

300013 H Crank — — — Black 29.95 26.95

Knobs

BA D

EWire Nuts

STOCK # FIG. SIZE COLOR QTY. $ 1+

340024 A Small Black 100 15.95

340085 A Small Orange 100 17.95

340025 B Medium Black 100 15.95

340086 B Medium Yellow 100 17.95

340087 D Large Red 100 28.95

340088 E Jumbo Gray 50 24.95

STOCK # PINS $ 1-99 $ 100+

250023 8 .99 .85

250027 20 1.15 1.05

250029 28 1.25 1.15

Socket Wrap I.D. Simplifies wire wrappingneeds. Allows for quickidentification of pin numbers.

FF

G H

STOCK # FIG. # TYPE $ 1-9 $ 10+

390066 A 2 Solder .59 .53

390070 B 3 Solder .85 .80

390073 C 4 Solder .40 .36

390099 D 6 Solder .50 .47

390076 E 6 Solder .95 .90

390077 F 8 Solder .45 .40

390056 G 2 Threaded 1.09 .98

390101 — 3 Threaded .95 .85

390102 — 4 Threaded .70 .63

390103 — 5 Threaded .88 .71

390137 — 6 Threaded .95 .75

390104 — 7 Threaded 1.18 .94

390105 — 8 Threaded 1.34 1.07

390106 — 9 Threaded 1.75 1.55

390063 H 2 Spade Lug .20 .18

391071 I 7 Post 5.95 4.95

STOCK # FIG. # TYPE QTY. $ 1-9 $ 10+

450062 K T42 PushIn

100 9.95 8.95

450063 K T42 1000 69.95 59.95

450060 L T49 Wire Wrap

100 22.95 20.95

450061 L T49 1000 145.00 135.00

STOCK # # SIZE mm COLOR $ 1-9 $ 10+

390323 2 5 Blue .95 .85

390319 4 5 Blue 1.45 1.25

390320 10 5 Blue 2.95 2.50

Terminal Strips

Low-Profile Terminal Blocks [M]Connect wires to PC boards.

STOCK # # SIZE in. COLOR $ 1-9 $ 10+

390111 2 13/32 x 1/4 Black 2.95 2.65

390112 3 13/32 x 1/4 Black 2.15 1.95

390113 4 13/32 x 1/4 Black 3.25 2.95

390114 5 13/32 x 1/4 Black 3.45 3.25

390115 6 13/32 x 1/4 Black 3.50 3.30

390117 8 13/32 x 1/4 Black 3.95 3.75

390118 9 13/32 x 1/4 Black 5.45 4.95

390120 10 13/32 x 1/4 Black 5.55 5.15

Terminal Barrier Strips [J]Equivalent to Cinch Jones 140 series. Molded glossbakelite. Nickel-plated screws. Terminal verticalcenters 5/16 in. ; horizontal centers 3/8 in.

Micro Terminal ClipsConnect IC leads that lay in the terminal slot. Designed to fit 0.042 in. dia. hole and hold 3-4 wires.

A

B

C

D

E

K LM

IJ

Terminals

Page 48: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E48 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS BATTERIES

Button BatteriesMaxell brand button batteries. For watches, calculators and more! 220046 #LR44, 1.5V ....................95¢or 75¢ ea./10+220154 #CR2032, 3V ........................................75¢Button Battery Holder220080 Single ....................$1.55 or $1.39 ea./10+220081 Double ....................$2.85 or $2.65 ea./10+

Lithium Battery220114 #123 ..........$7.95 or $6.95 ea./10+220117 9V Radio ....$9.95 or $8.95 ea./10+

Ni-Cad/Ni-mh 4-Cell BatteryChargerCharges D, C, AA,AAA, 6V, and 9V Ni-Cad/Ni-mh batteries.LEDs indicate propercharging and switchcharges at 50mAHor 120mAH. 220035 ......$29.95

or $25.60 ea./3+

A[AAA]

B[AA]

C[C]

D[D]

E[RADIO]

STOCK # TYPE V QTY. $ 1-9 $ 10+

220009 AA 1.5 4 1.75 1.55

220008 C 1.5 4 2.79 2.65

220007 D 1.5 4 3.29 2.96

220010 Radio 9 1 1.15 .99

220012 Lantern Screw 6 1 7.95 7.45

220045 Lantern Screw 6 1 7.95 7.45

STOCK # FIG. TYPE V $ 1-9 $ 10+

220009 A AAA 1.5 .85 .80

220008 B AA 1.5 .80 .75

220007 C C 1.5 1.25 1.10

220010 D D 1.5 1.75 1.55

220012 E Radio 9 2.35 1.85

Carbon Batteries

Alkaline Batteries Eveready or Duracell Quality

STOCK # FIG. TYPE mAH V $ 1-5 $ 6+

220009

F

AAA — 1.2 .85 .80

220008 AA 500 1.2 .80 .75

220007 AA 500 1.2 1.25 1.10

220010 C 1200 1.2 1.75 1.55

220012 Radio — 9 2.35 1.85

Rechargeable Ni-Cad Batteries 1.2V (except the 9V radio) sealed Nickel Cadmium cells provide up to 1,000 charge/discharge cycles.

STOCK # FIG. TYPE mAH V $ 1-9 $ 10+

220107

G

Hobby — 7.2 12.95 10.95

220123 — 650 9.6 19.95 17.95

851073 — 900 9.6 34.95 32.95

Rechargeable Ni-Cad Battery Packs 1.2V (except the 9V radio) sealed Nickel Cadmium cells provide up to 1,000 charge/discharge cycles.

AC Adapter Includes 2.1 mm plug. 12V AC, 1A.220074 [D] ..................$7.95 or $7.45 ea./3+220136 Top quality wall adapter ............$19.95

Car Lighter Adapter310004 [E] 12V ..................95¢ or 85¢ ea./3+

Surge Protector Plugs into outlet, plug cord into it. 15A, 250V.340079 [F] ..................$9.95 or $9.45 ea./3+

STOCK # FIG. V DC mA $ 1-2 $ 3+

220118

A

6 500 8.45 7.95

220101 8.5 1200 14.95 13.95

220069 9 500 5.95 5.65

220099 9 1200 19.95 17.95

220068 12 500 13.95 12.95

220121 12 800 9.95 —

220100 B 12 2000 33.95 30.95

220032 C 3-12 500 5.95 5.45

DC Adapters with 2.1 mm plug.

A

B

C

DE

F

KELVIN® HELPS YOU SAVE ON BATTERIES!

F

G

STOCK # TYPE PRONGS L ft. $ 1-9 $ 10+

33002518/2

2 3 1.29 1.16330153 2 6 3.45 3.10330005 3 6 4.95 4.45

Line Cords Molded plugs

STOCK # TYPE PRONGS L ft. $ 1-9 $ 10+

120052 18/2 3 6 4.95 4.45

Computer Line Cord Molded plugs

Galvanized Locknuts 1/2 in., 100/pkg.340147 [A]..................$7.25 or $6.85 ea/100+

Set Screw Connectors 1/2 in. dia., 50/pkg.340143 [B] ..................$9.95 or $9.45 ea/100+

Coupling340144 [C] ................$10.95 or $9.95 ea/100+

A B C

Page 49: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E49Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSBATTERY HOLDERS

B

C D E

F

H

I

J

N

M

P

O

Q

A B C D E

STOCK # FIG. SHAPE TYPE CONNECTION $ 1-9 $ 10+

220001 A T Snap Tinned leads (6 in. L) .19 .18

220017 B I Snap Tinned leads (4-1/2 in. L) .19 .18

220013 C Clip Metal Solder-Type .23 .18

220078 D Clip Plastic PCB-Mount 1.79 1.53

220018 E Clip Aluminum Solder-Type 2.95 2.65

Plastic Battery Holders

STOCK # FIG. TYPE CELL # $ ea.

220050 C C 1 2.35

220051 C C 2 3.95

220052 C C 3 6.75

220053 — C 4 6.75

220054 D D 1 2.95

220079 E C 6 9.35

220055 — D 2 4.95

STOCK # FIG. TYPE CELL # $ ea.

220041 A AAA 1 1.69

220047 B AAA 2 3.95

220085 — AAA 4 3.95

220049 C AA 1 2.59

220048 — AA 2 3.75

220042 — AA 3 5.75

220040 — AA 4 5.75

Aluminum Battery Holders

K

L

FOR AAABATTERIES

FOR AABATTERIES

FOR CBATTERIES FOR D

BATTERIES

9V Radio Battery Snaps and Clips

Stackable Plastic D-Cell Battery Holders Battery holders can be snapped together to form series and parallel battery packs. 220083 ..........$1.49 or $1.29 ea./10+

FOR DBATTERIES

STOCK # FIG. MATERIAL COLOR $ 1-9 $ 10+

220131 A AAA 2 1.55 1.45

220132 B AAA 4 2.75 2.65

220089 C AA 1 .50 .35

220128 D AA 1 1.45 1.35

220129 E AA 2 .95 .85

STOCK # FIG. MATERIAL COLOR $ 1-9 $ 10+

220090 F AA 2 .60 .50

220091 G AA 4 1.25 1.10

220004 H AA 4 1.05 .95

220092 I AA 6 2.25 2.05

282094 J AA 6 2.15 2.05

220093 K C 1 1.40 1.30

STOCK # FIG. MATERIAL COLOR $ 1-9 $ 10+

220094 L C 2 1.45 1.25

220095 M C 4 1.75 1.65

220098 N D 4 .95 .85

220133 O D 1 .85 .76

220096 P D 1 .75 .65

220097 Q D 2 1.49 1.34

G

A B C D E

Plastic Spacers 100/pkg. [A]

STOCK # # L in. $ 1-5 $ 6+

390146

4

1/4 13.95 12.95

390147 3/8 17.95 16.95

390148 1/2 17.95 16.95

390150 1 29.95 26.95STOCK # # L in. $ 1-5 $ 6+

390151

6

1/4 13.95 12.95

390152 3/8 17.95 16.95

390153 1/2 18.95 17.95

390154 5/8 18.95 17.95

390155 3/4 18.95 17.95

390156 1 19.95 18.95STOCK # # L in. $ 1-5 $ 6+

390157

8

1/4 18.95 17.95

390158 3/8 18.95 17.95

390159 1/2 18.95 17.95

390160 5/8 8.95 17.95

390161 3/4 19.95 18.95

390162 1 19.95 18.95STOCK # # L in. $ 1-5 $ 6+

39016310

1/4 19.95 18.95

390165 1 35.95 34.95

Aluminum Spacers [B]

STOCK # # L in. $ 1-9 $ 10+

3901446

1/2 .19 .17

390128 1 .23 .21

Find more SCREWS in thePROJECT TOOLS chapter

on pg. PT8

A B

Sheet Metal ScrewsFlat Head, Phillips, Steel/Zinc

STOCK # # L in. QTY. $ ea.

390539

6

3/4 100 2.65

390541 1 100 2.85

390543 1-1/4 100 3.25

390545 1-1/2 100 3.65STOCK # # L in. $ ea.

390540

8

3/4 100 3.65

390542 1 100 3.65

390544 1-1/4 100 5.45

390546 1-1/2 100 5.75

390547 1-3/4 100 5.95

Page 50: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E50 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS PLUGS / JACKS

Phone Jacks

B C

B B B

D E F

D EF

A

C

Solder-Type Plugs

STOCK # FIG. TYPE M. H. in. COLOR QTY. $ 1-9 $ 10+

400030 — Plastic with Nut 5/16 Red 10 21.95 20.95

400029 A Plastic with Nut 5/16 Black 10 14.90 13.50

400001 B Insulated, Solder — Red 1 .85 .75

400002 — Insulated, Solder — Black 1 .85 .75

600056 C Dual Banana to Dual Banana — — 1 1.95 1.65

990103 D Female BNC to Dual Banana — — 1 3.95 3.75

600058 E Male BNC to Dual Banana — — 1 5.95 5.35

STOCK # TYPE FIG. DESCRIPTION INSULATED? COLOR SIZE $ 1-9 $ 10+

400009

Pin Tip

A Bare N — — 1.69 1.59

400043 B RCA — — 13/16 in. L .69¢ .59

400020 B RCA — — 1-1/16 in. L .69¢ .59

400006 — Standard Yes Black 1-29/32 in. L 3.59 3.39

400007 C Standard Yes Red 1-29/32 in. L 3.59 3.39

990045

Phone

D Standard Yes Black 2.5 mm dia. .24 .20

990043 E Standard Black 3.5 mm dia. .26 .22

400041 — Stereo Black — .99 .89

400035 — Standard Black .25 in. dia. .99 .89

400011 F Stereo Black .25 in. dia. .52 .44

990053 — Large Barrel Yes Black .25 in. dia. .40 .34

990014 — Standard Yes Red .25 in. dia. .50 .40

A

B

5-Way Binding Posts Insulated and assembled. 0.25 in. post length.

Economy Binding Posts Requires 0.3 in. dia. mounting hole and 0.28 in.maximum panel thickness.

A

C D E

Banana Jacks

DC Power Supply Plugs and Jacks

STOCK # FIG. MATERIAL COLOR $ 1-9 $ 10+

400034 A Phenolic Red .99 .89

400033 — Phenolic Black .99 .89

400003 — Bakelite Red .99 .89

400004 — Bakelite Black .99 .89

400014 — Bakelite Yellow .99 .89

STOCK # FIG. SHAPE COLOR $ 1-9 $ 10+

400021 — Round Red 2.25 1.95

400022 C Round Black 2.25 1.95

400012 D Hex Red 2.95 2.75

400013 — Hex Black 2.95 2.75

STOCK # FIG. TYPE STEREO? DIA. mm INCLUDES $ 1-9 $ 10+

990024 A Submini — 2.5 Nut & Washer .28 .26

990023 — Mini No 3.5 Nut & Washer .25 .22

400048 B Mini Yes 3.5 Nut & Washer 1.12 1.00STOCK # FIG. TYPE STEREO? DIA. in. INCLUDES $ 1-9 $ 10+

400019 C Open — .25 Nut & Washer .40 .35

400018 D Closed — .25 Nut & Washer .47 .39

400010 E Open Yes .25 Nut & Washer .45 .40

990057 F Closed Yes .25 Nut & Washer 1.75 1.60

STOCK # FIG. L in. COLOR $ 1-9 $ 10+

990161 A 1.7 Red .57 .43

400043 B 1.7 Black .57 .43

STOCK # FIG. TYPE SHAPE $ 1-9 $ 10+

400005 B Phone Oval .65 .69

400042 — Phone Rect. .25 .23

400008 C Phono Round .29 .26

PLUGSTOCK # FIG. TYPE SIZE mm $ 1-9 $ 10+

370051 A Standard 2.1x5.5 .35 .25JACKS

STOCK # FIG. TYPE SIZE mm $ 1-9 $ 10+

370052 B Chassis 2.1x5.5 2.59 2.39

370058 C R. Angle 2.1 .40 .34

Tip Jacks Includes nut. 0.08 in. dia.

RCA Jacks Includes nut. 0.25 in. dia. mounting hole.

A B

C D

A B

C

A B C

Page 51: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E51Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSCLIPS / LEADS

A

B C

D

K

L

M

E F

GH

I J

Component Test Leads Banana to alligator for testing capacitors, inductors, and resistors. Leads measure7 in. long in length. 282442 [F] ....................................................................$3.95 or $3.65 ea./3+

IC Clip to Banana Plug Test Leads36 in. long leads for use with meters. Set of 2 leads; 1 Black / 1 Red.990100 [G] ....................................................................$5.95 or $5.65 ea./3+

Test Leads HolderFor patch cords and cable assemblies.

D E

F G

Male BNC to 2 Mini Alligator Clips Test Leads39 in. long leads. Set of 2 leads; 1 Black / 1 Red.990070 [A] ....................................................................$3.95 or $3.75 ea./3+

Male BNC to 2 IC Mini Clips Test Leads 39 in. long leads.Set of 2 leads; 1 Black / 1 Red.990069 [B] ....................................................................$3.95 or $3.75 ea./3+

Alligator Clip Test LeadsSet of 10 leads in assorted colors with small clips.330009 [C] 22AWG, 20 in. Long Leads ......................$2.45 or $2.25 ea./10+330114 [C] 20AWG, 24 in. Long Leads ..............................$5.95 or $5.35 ea./10+330410 [C] 22AWG, 180 in. Long Leads, High Quality ............$7.95 or $7.45 ea./10+

A B C

STOCK # FIG. DESC. $ 1-9 $ 10+

310009 A Micro, Solder-type, #34 .59 .55310008 B Mini, Bare, #30 .39 .35990013 C Mini, Black, Insulated .30 .28990012 D Mini, Red, Insulated .30 .28310001 E Bare, Fits Banana Plugs, #60, Solder .39 .36310013 F Bare, 2 in. Long, Threaded, #60-S .59 .55310010 G Bare, Threaded, #70-S .65 .60310012 — Red, Insulated, Threaded, #60-HS .85 .79310011 H Black, Insulated, Threaded, #60-HS .85 .79

STOCK # FIG. DESC. $ 1-99 $ 100+

310018 K Pygmy Hippo, Red, Insulated, Solder-type .69 .62310019 — Pygmy Hippo, Blk, Insulated, Solder-type .69 .62310003 L Crocodile, Threaded, #85 .79 .75310002 M Pee Wee, Threaded, #45 .65 .59

STOCK # FIG. DESC. $ 1-9 $ 10+

310015 I Fits #34, Red .10 .09310014 — Fits #34, Black .10 .09310007 J Fits # 60, #60-S, & #70-S, Red .24 .22310006 — Fits # 60, #60-S, & #70-S, Black .24 .22

STOCK # DIA. in. COLOR $ 1-2 $ 3+

960041 0.21 Orange 19.95 18.95

960042 0.32 Black 19.95 18.95

960043 0.45 Blue 19.95 18.95

Banana to Alligator Test LeadsStackable banana to alligator clip. 36 in. long. 282440 [D] ....................................................................$3.95 or $3.65 ea./3+

Minigrabber to Minigrabber Test LeadsIC clip test lead set. Length - 36 in. 282441 [E] ....................................................................$3.95 or $3.65 ea./3+

Alligator Clips

Flexible Vinyl Alligator Clip Insulators

Other Clips

Page 52: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

A B C D

E F H

I L

G

J K M

N

O

Coaxial Wire Stripper530163 [P] For RG-58/79 Cable ....................................$19.95 or $17.95 ea./3+

STOCK # FIG. PLUG #1 PLUG #2 SHAPE $ 1-9 $ 10+

370012 A AF-59A Female RG-59U Straight .25 .23

370013 B AF-81B Female AF-81B Female Straight .18 .16

370020 C Male Phono Female Straight .75 .67

370022 D Female Phono Male Straight .75 .67

770008 E Female Male Straight .48 .43

370031 F Female Male R. Angle .89 .80

370010 — UG-175 RG-58 Straight .21 .19

370011 G UG-176 RG-59 Straight .49 .44

370001 H PL-259 UHF Male PL-259 UHF F Straight 1.00 .90

370004 I SO-239 UHF Male SO-239 UHF F Straight 1.00 .90

370029 J UG-273 UHF Male BNC Female Straight 3.95 3.75

370003 K PL-258 UHF Male PL-258 UHF Male Straight .95 .85

370002 L M-358 UHF Male M-358 UHF F T 2.95 2.65

370005 M M-359 Male M-359 Female R. Angle 2.20 1.98

STOCK # FIG. TYPE PLUG #1 PLUG #2 L ft. $ 1-5 $ 6+

780005 N Threaded Female Female 3 1.95 1.75

780006 N Threaded Female Female 6 2.25 2.00

780001 — Quick Connect Female Female 6 1.95 1.75

780009 — Standard RCA RCA 3 1.00 .90

780002 — Standard RCA RCA 6 2.25 2.00

780008 — Standard Dual RCA Dual RCA 3 5.95 5.65

780010 — Standard Dual RCA Dual RCA 6 6.95 6.25

STOCK # FIG. TYPE RATING COLOR L ft. $ 1-2 $ 3+

330115 O RG-58U 50 ohms Black 100 14.95 14.45

330001 O RG-59U 75 ohms Black 100 13.95 13.45

Video Connectors

Gold Ends Brand Video Cables

R TU

S

Video Splitters

E52 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS VIDEO

Coaxial Cable

STOCK # FIG. TYPE DESCRIPTION RATING L ft. $ 1-2 $ 3+

990101 Q RG-58U Male to Male 50 ohms 3 3.45 2.95

990102 Q RG-58U Male to Male 50 ohms 6 4.45 3.78

STOCK # FIG. TYPE $ 1-9 $ 10+

370027 R 2-Way .65 .58

770066 S 3-Way .48 .40

770007 T 4-Way 1.20 1.08

370028 U A-B Switch 4.25 3.95

BNC Test Cables

P

Q

A B C D

STOCK # FIG. TYPE DB V DC V AC $ 1-9 $ 10+

680089 A Wire Lead 80 3-12 — 1.25 1.15

680104 B PCB-Mount / Leads 80 6-9 — 1.95 1.75

680135 C Piezo 80 3-6 — 2.95 2.75

680103 C Piezo 70 3-6 — 4.95 4.75

340043 D Double-Coil — 3-6 6-10 8.95 —

Project Buzzers

E F G H

STOCK # FIG. TYPE V DC V AC A D in. $ 1-9 $ 10+

340040 E Double-Coil 3-6 6-10 — — 1.25 1.15

320032 F Transformer — 115 5-10 — 14.95 13.95

340044 G Switch — — — 1.75 3.95 3.55

640001 H Alarm Horn 5-10 — — — 3.95 3.55

Project Bells

Page 53: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E53Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSCOMPUTERS

Ribbon Cable

AD

J

M

N O P

Q

RS

K L

E F G H I

B

C

STOCK # TYPE FIG. AWG # OF WIRES L ft. $ 1-4 $ 5+

330297 Stranded

B

24 4 10 4.50 3.90

330298 24 9 10 7.50 6.90

330299 24 15 10 9.90 8.90

330300 24 25 10 7.50 6.00

STOCK # TYPE FIG. PINS TYPE SOLDER? HOOD? $ 1-9 $ 10+

391073 USB D — B — — .90 .81STOCK # TYPE FIG. PINS TYPE SOLDER? HOOD? $ 1-9 $ 10+

120288

D-Sub M

ini

E 9 Right Angle, PC Yes No .95 .85

370037 F 9 Male Yes No .59 .49

370042 G 9 Female Yes No .59 .49

370038 H 15 Male Yes No .79 .69

370043 I 15 Female Yes No .89 .79

370039 J 25 Male Yes No .75 .65

370044 K 25 Female Yes No .90 .80

370047 L 25 F, R. Angle, PC Yes No 1.65 1.45STOCK # TYPE FIG. PINS TYPE SOLDER? HOOD? $ 1-9 $ 10+

370061 Centronics

M 36 Male No Yes 1.75 1.57

370062 N 36 Female No Yes 3.95 3.65

120064 O 36 Male Yes Yes 3.25 2.95

370049 P 36 F, R. Angle, PC No Yes 1.35 1.25STOCK # TYPE FIG. AWG # OF WIRES L ft. $ 1-4 $ 5+

330309

StrandedC

24 10 10 5.00 4.00

330301 24 16 10 6.00 5.00

330302 24 20 10 6.50 5.50

330303 24 25 10 6.50 5.50

330304 24 26 10 6.50 5.50

330305 24 34 10 8.90 7.90

Computer Connectors

Connector Covers/Hood [Q] Gender Changers [R] [S]

STOCK # PINS TYPE $ 1-9 $ 10+

370056 9 M / F .79 .69

120236 15 M / F .79 .69

120060 25 M / F .89 .79

STOCK # PINS TYPE $ 1-9 $ 10+

780053 9 F / F 3.50 3.25

780052 25 F / F 6.95 6.45

120191 25 F / M 7.95 7.45

Multiconductor Computer Cable

STOCK # PLUG #1 PLUG #2 L ft. $ 1-9 $ 10+

780030 9-pin Male 9-pin Female 6 5.95 5.45

780034 9-pin Male 9-pin Male 6 5.95 5.45

780051 9-pin Female 25-pin Male 6 7.95 7.45

780027 25-pin Male 25-pin Male 6 7.95 7.45

780026 25-pin Male 25-pin Female 6 8.95 8.45

120220 25-pin Male 35-pin M Centronics 6 5.95 5.45

780025 36-pin M Centronics 36-pin M Centronics 6 8.95 8.45

900036 DB25 DB36 Printer 6 10.95 10.45

780071 USB A USB B 6 5.95 5.45

Computer Cables [A]

STOCK # PRONGS FITS $ 1-9 $ 10+

330076 2 18/2 8.95 8.45

330093 2/3 16/3 10.45 9.95

Strain Relief Bushing For line cord, 100/pkg. [C]

STOCK # L in. $ 1-5 $ 6+

390083 1/8 5.95 5.75390085 3/16 6.95 6.75390086 1/4 6.95 6.75390087 5/16 7.95 7.45390088 3/8 7.95 7.45390089 7/16 8.95 8.75

STOCK # L in. $ 1-5 $ 6+

390090 1/2 16.95 15.95390078 5/8 16.95 15.95390079 3/4 19.95 18.95390080 7/8 19.95 18.95390081 1 20.95 19.95390082 1-3/16 61.95 59.95

STOCK # L in. $ 1-9 $ 10+

390169 4 3.95 3.55

390299 8 5.95 5.55

Cable Clamps Plastic, 100/pkg. [A]

Locking Ties Plastic, 100/pkg. [B]

A B

C

Page 54: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E54 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS AUDIO

Pushbutton TerminalTerminal includes spring-loaded posts for easyconnection with 4positions: 2 red, 2 black. 390737 ..............................................$1.50Air Suspension Woofer Quality Sound! 91dB, 8 ohm impedance, 40-4,000HZ frequency response, 60W peak power, 36Hz resonant frequency, 20 oz. magnet, 1 in. aluminum voice coil, 8 in. diameter.350039 ..................$12.95 or $11.95 ea./2+

Build Your Own® Speaker System

Build YourOwn® Antenna!

Copper Enamel Magnet Wire

H

M

Project Microphone 350041 [H] 10V DC, 1K ........$2.25 or $1.95 ea./10+

Multi-Purpose Microphone Ideal for project or tape recorders. Includes a 9 ft.long shielded cord with a 3.5mm mini phone plug.990047 [I] ..........................$8.95 or $8.05 ea./10+

Microphone Connectors370009 [J] 5501F ......................52¢ or 46¢ ea./10+

Microphone Plug Panel Mount370017 [K] Female ..............$2.95 or $2.65 ea./10+

Microphone Plug w/ Positive Latch Lock370016 [L] Female ............$2.40 or $2.04 ea./10+

Low Impedance Earphones 8 ohm, 3.5mm, 3.55mm earplug hanger. 990140 [M] 6-foot cord..........$1.75 or $1.65 ea./6+

High Impedance Earphones 2K ohms, 3.5mm plug. 3-foot cord.990015 ..............................$2.95 or $2.75 ea./6+

Lightweight Stereo Headphones100dB, 20-19K, 4-32 ohms. 3.5mm stereo plug.350043 [N] ........................$3.95 or $3.60 ea./10+

Shielded Microphone Cable Stranded, 2-conductor cable. 250 ft. long.330151 ................................$54 or $49.95 ea./2+

IN

K

L

J

Use the Ferrite Rod (8mmx10cm),Inductive Coil (100mH, 10mA,PC board mount, PCM) andMagnet Wire (#22 CopperEnamel). Loop the ferrite rod with magnet wireto build your own antenna. 220109 Ferrite Rod ......$1.85 or $1.75 ea./10+290014 Inductive Coil ..$4.95 or $3.95 ea./10+

STOCK # AWG L ft. WT.

lbs. $ 1-2 $ 3+

330128 22 514 1 14.95 13.95

330130 24 817 1 15.95 14.95

330132 26 1300 1 15.95 14.95

330134 28 2067 1 16.95 15.95

330136 30 3287 1 16.95 15.95

330036 18 2030 10 125.00 120.00

330037 20 3230 10 128.00 123.00

330038 22 5140 10 128.00 123.00

330039 24 8170 10 130.00 125.00

330040 26 13000 10 135.00 125.00

330041 28 20670 10 140.00 135.00

AB C

PM Speakers

Standard Brands for Projects

D

STOCK # FIG. DIA. in. WATTS OHMS $ ea.

350009 A 2 0.1 8 .59

350004 — 2.25 0.2 8 2.95

350002 — 2.5 0.5 8 1.65

350003 — 3 0.5 8 1.95

350016 B 4 1 8 2.45

Project Speakers

STOCK # FIG. DIA. in. WATTS OHMS $ ea.

350013 — 8 10 8 10.95

350014 — 12 15 8 26.95STOCK # FIG. SIZE in. WATTS OHMS $ ea.

350005 C 3 x 5 1.5 4 3.95

350012 D 5 Oval 5 4-8 3.95

Audio Amplifier Speaker100Hz-10KHz. Frequency: 1mV, 5K. 1KHz poweroutput, 200mV, 16 ohm load. Requires a 9V batteryor 9V DC adapter.350049 [E] ....................................$19.95Indoor/Outdoor SpeakerWeatherproof. Built-in dual matching transformer.8 ohm impedance. 32W nominal outputs. 25V/70.7V.450-8,000Hz Frequency: Swivel bracket, high impactABS plastic casing, tan. 11 x 6-1/2 in.350026 [F] ..........................$39.95 or $34.95 ea./4+

Radio Cabinet EnclosureDoes not include knobs or backplate. Measures 9.78x 5.24 x 3.78 in.840072 [G]................$1.95 or $1.45 ea./30+

Multi Purpose Antenna Telescopic for AM/FM Radio/TV. 290013 ....................$1.95 or $1.75 ea./3+

EF

G

Find WIRE in this chapter on pg. E45.

Page 55: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E55Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSPOTENTIOMETERS

B

CA

F

E

D

STOCK # TYPE FIG. PCB? OHMS $ 1-9 $ 10+

110034

Mini A No

500 .99 .85

110035 1k .99 .85

110036 2k .99 .85

110038 10k .99 .85

110039 20k .99 .85

110040 50k .99 .85

110041 100k .99 .85

110042 200k .99 .85

110043 500k .99 .85

110044 1M .99 .85

110045 2M .99 .85

STOCK # TYPE FIG. PCB? OHMS $ 1-9 $ 10+

110118

Standard

C No

500 1.65 1.45

110119 1k 1.65 1.45

110120 5k 1.65 1.45

110121 10k 1.65 1.45

110123 1M 1.65 1.45STOCK # TYPE FIG. PCB? OHMS $ 1-9 $ 10+

110082

Standard

D Yes

1k 1.95 1.75

110083 5k 1.95 1.75

110100 5k 1.95 1.75

110117 10k 1.95 1.75

110072 50k 1.95 1.75

110073 100k 1.95 1.75

110106 2.2M 1.95 1.75STOCK # TYPE FIG. PCB? OHMS $ 1-9 $ 10+

110099 Top Adj.

E Yes

1k 2.25 1.95

110107 47k 2.25 1.95

110110 1M 2.25 1.95STOCK # TYPE FIG. PCB? OHMS $ 1-9 $ 10+

110109

CTS F Yes

10k 1.25 .95

110111 100k 1.45 1.25

110122 100k 1.65 1.45

110102 500k 1.95 1.75

110103 2.5k 1.95 1.75

110112 25k 1.95 1.75

STOCK # OHMS $ 1-9 $ 10+

110051 500 1.15 1.05

110052 1k 1.15 $1.05

110053 2.5k 1.15 1.05

110054 5k 1.15 1.05

110055 10k 1.15 1.05

110056 25k 1.15 1.05

110057 50k 1.15 1.05

110058 100k 1.15 1.05

110059 250k 1.15 1.05

110060 500k 1.15 1.05

110061 1M 1.15 1.05

110063 5M 1.15 1.05

Rotary SwitchesWith 30° indexing, singlephenolic wafer sections and silver-plated contacts.

STOCK # OHMS POS. $ 1-9 $ 10+

990031 2 6 1.95 1.75

990037 6 2 1.95 1.75

990029 1 12 1.95 1.75

990030 2 5 1.95 1.75

990033 3 4 1.95 1.75

990035 4 3 1.95 1.75

Linear Taper [H]

Vertical

STOCK # TYPE FIG. PCB? OHMS $ 1-9 $ 10+

110078 Standard

B Yes

1k 1.35 .99

110079 5k 1.35 .99

110080 10k 1.35 .99

110081 100k 1.35 .99

15-Turn

Horizontal

STOCK # OHMS $ 1-9 $ 10+

110064 1k 2.95 2.50

110065 5k 1.15 1.05

110066 10k 1.15 1.05

110067 50k 1.15 1.05

110068 100k 1.15 1.05

110069 500k 1.15 1.05

110029 500k w/Switch 1.50 1.35

110070 1M 1.15 1.05

Audio Taper [C]

STOCK # OHMS $ 1-9 $ 10+

110132 1k 1.95 1.76110136 2k 1.95 1.76110130 10k 1.95 1.76110137 50k 1.95 1.76110133 100k 1.95 1.76110135 500k 1.95 1.76110134 1M 1.95 1.76

Vertical PCB-Mount [A]

STOCK # OHMS $ 1-9 $ 10+

110085 1k 19.95 18.95110086 5k 19.95 18.95110087 10k 19.95 18.95110088 100k 19.95 18.95

High-Quality 2W, 10-Turn [B]

STOCK # OHMS $ 1-9 $ 10+

110090 1k 13.95 12.95

110091 5k 13.95 12.95

110092 10k 13.95 12.95

110093 100k 13.95 12.95

Linear 2W [F]

STOCK # OHMS $ 1-9 $ 10+

110049 1M 1.15 1.05

Linear Control PCB-Mount [E]

STOCK # OHMS $ 1-9 $ 10+

590431 50k 5.95 5.36

Digital Quad [D] STOCK # OHMS $ 1-9 $ 10+

110076 10k 3.95 3.75

110077 100k 3.95 3.75

Slide 3-1/2 in. L [G]

A B C D E F G H

Key Lock Switch Use for creating a burglar alarm system. Two positions; on/off. Requires 3/4 in. dia.mounting hole. 102V AC. 2.1A; 46V DC, 2.5A.640028 ..................$13.95 or $13.25 ea./6+

Magnetic Contact Switch Use with closed or open systems. The magnetcan operate the switch with a gap as wide as1/2 in. Contact points are gold-plated. SPDT. 1Pair. UL listed. 640022 ......................$7.95 or $7.45 ea./10+

Find moreSwitches in

this chapter onpgs. E60-61

Trimming Potentiometers

Potentiometers

Page 56: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

H

E56 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS SWITCHES

C

B

C

A

D

A B CD E

A

B

CE

F

I

J

KL

M

GD

STOCK # FIG. TYPE CONTACT V AC A L x W x H in. NUT? $ 1-9 $ 10-99 $ 100+

990097 A PCB Mount SPDT 125 0.3 5/16 x 3/8 x 3/16 No 1.95 1.80 1.75

270063 B PCB Mount DPDT 125 0.3 3/8 x 3/8 x 5/16 No 7.95 7.45 6.95

270034 C – SPST 125 6 1/2 x 3/8 x 1/4 Yes .90 .79 .65

270035 D – SPDT 125 6 1/2 x 1/2 x 3/8 Yes .99 .84 .69

270036 E Center Off SPDT 125 6 1/2 x 3/8 x 5/16 Yes 1.25 .99 .89

270037 F – DPDT 125 6 1/2x1/2x3/8 Yes .89 .79 .70

270007 G – SPST 125 4 1x1/2x1/2 Yes 1.05 .85 .75

270001 H – SPST 125 8 7/8x1/2x5/16 Yes 4.95 4.45 3.95

270005 I – SPDT 125 15 1-3/8x3/4x1/2 Yes 1.20 1.10 .99

270011 J – DPST 125 6 1-1/4x3/4x3/4 Yes 1.15 .95 .85

270013 K Center Off DPDT 125 15 1-1/4x3/4x7/8 Yes 1.75 1.45 1.25

270059 L Bat Handle SPST 125 20 1x1/2x1/2 Yes 3.95 3.75 3.50

270060 M Bat Handle DPDT 125 6 1-3/8x7/8x3/4 Yes 5.95 5.75 5.50

STOCK # FIG. TYPE CONTACT V AC A L x W x H in. $ 1-9 $ 10-24 $ 25+

270084 A Submini SPDT 125/250 6 1/2 x 1/4 x 3/8 1.45 1.25 1.00

270085 B Mini Roller SPDT 250 5 1-1/8 x 1/4 x 5/8 1.65 1.55 1.45

270061 C Hinge SPDT-NC 125/250 10 1.1 x 0.4 x 0.63 4.95 4.45 4.20

STOCK # FIG. CONTACT $ 1-9 $ 10-24 $ 25+

990193 A SPST 1.59 1.49 1.35

990194 B SPDT 1.69 1.52 1.43

990195 C DPDT 2.35 1.95 1.75

STOCK # FIG. CONTACT $ 1-9 $ 10-24 $ 25+

990191 – SPDT 1.95 1.80 1.75

990192 D DPST 1.79 1.60 1.50

990085 E DPDT 4.95 4.45 4.25

Toggle Switches Doll House Switches

Momentary Switches

Knife Switches

Lever with Fahnstock connections. [A]

STOCK # TYPE CONTACT QTY. $ 1-9 $ 10+

270077 On-Off SPST 1 1.25 1.15

Toggle Requires connection screw. [B]

STOCK # TYPE CONTACT QTY. $ 1-9 $ 10+

270095 On-Off SPST 10 8.95 7.95

Pushbutton Requires connection screw. [C] [D]

STOCK # TYPE CONTACT QTY. $ 1-9 $ 10+

270096 On-Off SPST 10 8.95 7.95

270097 N.O. SPST 10 8.95 7.95

STOCK # FIG. TYPE CONTACT $ 1-9 $ 10+

270096 A R. Angle SPST 1.75 1.58

270052 B N.O. SPST .95 .85

270074 B N.O./N.C. SPDT 2.45 2.25

Lever Switches

Snap Action 270061 is QuickConnect, Screw Mount

A B C

Screw-Type Binding Post Type

Lighted Rocker SwitchSPST, 250V AC, 10A. Requires 1-1/8 x 1/2 in. panelcutout.340130 [C]...$1.85 or $1.80 ea./10+ or $1.75 ea./25+

Hall Effect Switch/Sensor 270051 [D] ......................$2.75 or $2.45 ea./10+

Slotted Optocoupler Interrupter 250045 [E] ........................$2.95 or $2.75 ea./10+

A B

C

D

E

Page 57: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E57Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSSWITCHES / SENSORS

Ultrasonic Sensor Set40kHz ± 1.0 kHz. Aluminum flower case. 680115 [I] ....................$12.95 or $11.95 ea./10+

Ultrasonic TransducerTransmits or receives 40K Hz ultrasonic waves. 680105 [J] 40kHZ ............$10.95 or $9.95 ea./10+

LED Transmitter/Infrared Detector Set260061 [K] ......................$1.95 or $1.75 ea./10+

Infrared Sensors260093 Detector ................85¢ or 75¢ ea./20+260094 Transmitter....................85¢ or 75¢ ea./20+260111 Transmitter, Rectangular ..90¢ or 80¢ ea./20+

Thermistors Raises the temperature as resistance goes down.110097 [D] 100 Ohms ..............$1.35 or $1 ea./10+110108 [D] 1K Ohms ..........$4.95 or $4.75 ea./10+110098 [D] 10K Ohms ..............$1.35 or $1 ea./10+

Humidity SensorTypically 1M at 30% relative humidity to 1K at 90%relative humidity. 15 x 12 x 4.5mm.260199 [E] ..................$12.95 or $11.95 ea./10+

Photo CellsLight sensors with variable resistance. 260017 [F] 450 Ohms ..............99¢ or 85¢ ea./100+260018 [F] 1.5K Ohms ............99¢ or 85¢ ea./100+

LDR Resistor Top Quality260125 [G] ..............$2.75 or $2.45 ea./10+

E

F

B

C

D

H

G

Tilt Switch Metal Can270086 [A] ......................$2.65 or $2.45 ea./10+

Magnetic Reed Switch [d] 270065 [B] ......................$1.49 or $1.34 ea./10+

Reed Switch with Magnets 840981 [C] 5/pkg. ..............$3.95 or $3.45 ea./10+

I J K

STOCK # FIG. TYPE CONTACT V DC V AC A L x W x H in. $ 1-9 $ 10-24 $ 25+

270099 A Horizontal SPDT 50 — 0.5 0.43 x 0.20 x 0.20 1.95 1.80 1.75

270111 A Horizontal SPST — 125 0.5 1/2 x 1/4 x 1/4 7.95 7.45 6.95

270064 B Standard SPDT — 30 0.2 7/16 x 3/16 x 1/8 .90 .79 .65

270089 C Standard SPDT 125 — 0.5 1/2 x 1/4 x 1/2 .99 .84 .69

STOCK # FIG. CONTACT V DC A L x W x H in. $ 1-9 $ 10-24 $ 25+

270092 D DPDT 50 0.5 5/8 x 1/4 x 1/4 1.25 .99 .89

270054 E DPTT 125 0.5 13/16 x 5/16 x3/8 .89 .79 .70

C

D E

F

G

H

Slide SwitchesTilt Switches

Pushbutton Switches

B C D E

F G H I

A

A B

PCB-Mount [D]

Side-Mount [D]

STOCK # FIG. CONTACT V DC A DC A AC L x W x H in. $ 1-9 $ 10-24 $ 25+

270042 F SPST 125 0.5 — 5/8 x 1/4 x 3/8 1.05 .85 .75

270004 G SPST 125 0.5 3 7/8 x 5/16 x 1/2 4.95 4.45 3.95

270002 H SPDT 125 0.5 3 7/8 x 5/16 x 1/2 1.20 1.10 .99

270009 I DPDT 125 0.5 3 7/8 x 5/16 x 1/2 1.15 .95 .85

STOCK # FIG. TYPE V DC A M.H. DIA.in. NUT? COLOR $ 1-99 $ 100+

990074 A Normally Closed 110 3 1/4 Yes Black .35 .28

990002 B Normally Closed 110 3 1/4 Yes Red .35 .28

270058 C On-Off 230 3 1/2 Yes Red 1.35 1.25

270109 G Normally Open 125 3 1/2 Yes Black 3.95 3.75

270110 H Normally Open 125 3 3/8 Yes Red 3.95 3.75

Solder-Type [D]

Solder-Type

STOCK # FIG. TYPE V DC A M.H. DIA.in. NUT? COLOR $ 1-99 $ 100+

270022 D N.O. 14 2 3/8 Yes Red 1.29 1.16

270021 E On-Off 14 2 3/8 Yes White 1.29 1.16

270023 F N.C. 14 2 3/8 Yes Black 1.29 1.16

With Leads

A

Page 58: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E58 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS SWITCHES / TRANSISTORS

A

B

STOCK # FIG. A V AC TYPE $ 1-9 $ 10+

380056 A 3 250 Panel 4.45 3.95

380074 B 2 — Reset 6.95 6.45

380073 B 5 — Reset 9.99 8.99

Circuit Breakers

General Purpose AccelerometersUsed for vibration, automobile testing, seismic vibration, tilt, sway andorientation measurement. Low DC voltage. 260164 [A] 3-Axis, 4g Accelerometer ..................................................$295260165 Serial Interface Card ..............................................................$295

Infrared Sensor PacksIdeal for robotics, positioning, control, targeting, measurement, navigation,and automation; a low-cost alternative to an ultrasonic range finder.Connects directly to microcontroller. Built-in receiver and transmitter. 8-bit serial range; measuring range 4 - 31 in. (10 to 80 cm). Uses only twoI/O lines. Comes with 12 in. cable. 260167 [B] A.I.R.R.S. Analog ................................$29.95 or $27.95 ea./3+260166 D.I.R.R.S. Digital ......................................$49.95 or $44.95 ea./3+

Thumbwheel BCD Switch Binary Coded Decimal(BCD) switch. Theswitches snap together.10-position switch. Sp.270068 [E]..........$5.95

STOCK # POS. $ 1-9 $ 10+

270026 4 .80 .69

270027 6 .99 .86

270029 8 1.45 1.35

270030 10 1.75 1.60

STOCK # TYPE CONN. H in. D in. $ 1-9 $ 10+

250003 TO-3 Leads 3/16 23/64 .99 .89

250009 TO-5 PCB — 1/4 .54 .49

A B

C

DIP Switches Suitable for flow soldering on PC boards or mounting with standard DIP sockets.Actuators 0.035 in. above switch housing.SPST. Standard, 0.100 x 0.300 in. DIP centers.

STOCK # VALUE $ 1-9 $ 10+

630007 2N1098 2.95 2.75630012 2N1302 4.95 4.45630033 2N2102 1.15 .90630038 2N2218A 1.35 1.15630039 2N2219 .95 .75630040 2N2219A .95 .80630041 2N2222 .40 .36630042 2N2222A .40 .36 630045 2N2613A 1.95 1.75630047 2N2646 3.50 2.95630055 2N2905A .65 .45630056 2N2907 .65 .45630057 2N2907A .65 .55630059 2N2923 .75 .65STOCK # VALUE $ 1-9 $ 10+

630067 2N3055 1.50 1.28630068 2N3390 .95 .85630073 2N3394 .45 .35630079 2N3504 1.15 .95630083 2N3568 .75 .65630084 2N3611 1.80 1.50630085 2N3612 2.95 2.75630087 2N3638A .95 .80630088 2N3641 .95 80630090 2N3643 .95 .80630091 2N3644 .95 .80630092 2N3645 .95 .80630095 2N3691 .95 .80630096 2N3692 .95 .80630099 2N3704 .95 .80630101 2N3706 .95 .80630103 2N3709 .95 .80630116 2N3903 .29 .24630117 2N3904 .12 .10630118 2N3905 .10 .9 630119 2N3906 .9 .8STOCK # VALUE $ 1-9 $ 10+

630124 2N4037 1.85 1.60850244 2N4220 1.45 1.25630370 2N4222 1.15 .95630144 2N4237 .95 .80

STOCK # VALUE $ 1-9 $ 10+

630146 2N4274 .95 .80 850243 2N4403 .13 .11630152 2N464 3.95 3.75630154 2N4870 2.95 2.45630159 2N4913 1.95 1.60630160 2N4916 .95 .80630373 2N4918 1.35 1.15630374 2N4921 .95 .85STOCK # VALUE $ 1-9 $ 10+

630161 2N5040 1.95 1.60630162 2N5060 .95 .80630163 2N5062 .95 .80630164 2N5064 1.25 1.05630167 2N5132 .95 .80630169 2N5134 .95 .80630170 2N5138 .95 .80630173 2N5210 .55 .45630174 2N5219 .95 .80 630175 2N5224 .55 .45 630179 2N5294 1.20 .90630181 2N5366 1.45 1.20630182 2N5400 .55 .40630185 2N5457 .1.50 .1.25630187 2N5496 1.25 .95630188 2N5497 1.25 .95630192 2N5810 .65 .45630193 2N5813 1.25 .95630194 2N5815 2.25 1.95630197 2N5820 .95 .80630198 2N5821 .95 .80630200 2N585 1.50 1.25STOCK # VALUE $ 1-9 $ 10+

630203 2N6004 .95 .80630204 2N6005 .95 .80630322 2N6027 .50 .45630210 2N696 1.85 1.60630211 2N697 1.25 .95STOCK # VALUE $ 1-9 $ 10+

630215 2N709 .90 .75630218 2N730 .95 .75STOCK # VALUE $ 1-9 $ 10+

630221 2N956 .85 .75STOCK # VALUE $ 1-9 $ 10+

630383 PN2222A .12 .8STOCK # VALUE $ 1-9 $ 10+

630395 TIP29 .89 .79

TransistorsSAVE WITH Red Specials!

SAVE on2N222

32¢ea. for100+

SAVE on2N222A

32¢ea. for100+

SAVE on2N3904

6¢ea. for100+

SAVE onPN2222A

5¢ea. for100+

STOCK # FIG. # KEYS KEYS $ 1-5 $ 6+

270047 A 12 0-9, *, # 4.95 3.95

270093 B 12 0-9, *, # 15.95 14.95

270094 C 16 0-9, A-F 19.95 18.95

Keypads

STOCK # FIG. TYPE $ 1-5 $ 6+

270047 D Normally Open 4.95 3.95

270093 D Norm. Open, SPST 15.95 14.95

270094 — 6 in Row 19.95 18.95

Key Switches

D

E

Transistor Sockets

A B

Page 59: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E59Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSFUSES

Auto Fuses30A, 32V. 3 AG. 1-1/4 x 1/4 in. Min. order of 10. 380028 ..18¢ ea./10+ or 16¢ ea./100+

Slow-Blow Fuses1/4 x 1/4 in. 125 V. Min. order of 10.

STOCK # AMPS $ 10-99 $ 100+

380008 1/4 .49 .45

380009 1/2 .49 .45

380002 1 .49 .45

380024 1-1/2 .49 .45

380003 2 .49 .45

380025 2-1/2 .49 .45

380004 3 .49 .45

380005 4 .39 .35

380006 5 .39 .35

380007 6 .39 .35

STOCK # AMPS $ 10-99 $ 100+

380050 1 .42 .39

380051 2 .42 .39

380052 3 .42 .39

STOCK # T °C A V $ 1-9 $ 10+

380058 128 10 250 2.25 1.95

380059 228 10 250 2.75 2.55

STOCK # TYPE $ 1-9 $ 10+

380060 Standard 1.95 1.85

380061 Heavy Duty 3.75 3.45

STOCK # AMPS $ 10-99 $ 100+

380041 1/2 .35 .30

380043 1-1/2 .35 .30

380044 2 .35 .30

380045 3 .35 .30

380046 4 .35 .30

380047 5 .35 .30

Fast-Acting FusesAGC. 1/4 x 1/4 in. 250 V. Min. order of 10.

Pigtail Fuses GJV. 1-1/4 x 1/4 in. 250 V. Min. order of 10.

Slow Blow

Fast BlowSTOCK # V A $ 10-99 $ 100+

380014

125

2 .49 .45

380015 3 .65 .59

380016 4 .65 .59

380018 6 .65 .59STOCK # V A $ 10-99 $ 100+

380021

250

1/8 .95 .85

380011 1/4 .65 .55

380012 1/2 .65 .55

380013 1 .65 .55

STOCK # AMPS $ 10-99 $ 100+

380034 0.5 .15 .11

380035 1 .15 .11

380036 2 .15 .11

380037 3 .15 .11

380038 4 .15 .11

380039 5 .15 .11

GMA Test Instrument Fuses5 mm x 20 mm. 250 V. Min. order of 10.

Fast Blow

Thermal Protectors Fuse

AC Surge Protectors AC Varistor

STOCK # FIG. CONTACT V AC V DC A COIL RATING OHMS SIZE IN. $ 1-9 $ 10+

410030 A SPST — 200 0.5 5 V DC, 10 mA 500 0.95 x 0.335 3.99 3.05

410008 B SPST 125 — 1 5 V DC, 20 mA 250 1 x 3/8 4.25 3.95

410009 B SPST 125 — 0.5 12 V DC, 11 mA 1050 1 x 3/8 4.45 4.25

410006 C SPDT 120 — 5 5 V DC, 125 mA 40 1 x 3/4 2.45 2.20

410010 D SPDT 125 30 .4 AC, 2 DC 5 V DC, 77 mA 65 5/8 x1/4 8.95 8.05

410024 E SPDT 120 24 10 6 V DC, 60 mA 100 3/4 x 5/8 2.29 2.06

410013 F SPDT 120 24 12 9 V DC, 18 mA 500 3/4 x 3/4 6.95 6.45

410007 G SPDT 125 — 1 12 V DC, 38 mA 320 3/8 x 3/8 4.95 4.45

410012 H SPDT 120 28 10 12 V DC, 30 mA 400 7/8 x 5/8 6.95 6.45

410027 I SPDT 250 30 7 12 V DC, 30 mA 400 3/4 x 5/8 3.95 3.55

410025 J DPDT 110 24 5 6 V DC, 86 mA 700 7/8 x 11/16 3.29 2.96

410014 K DPDT 250 28 5 12 V DC, 60 mA 200 1-1/8 x 3/4 9.50 9.45

410016 L DPDT 110 24 10 12 V DC, 75 mA 160 1 x 1-3/8 17.95 16.15

410015★ M DPDT 250 32 5 13.2 V DC, 75 mA 160 1-1/8 x 1-3/4 15.95 14.95

C

H

Relays

K

G

L

A

Assorted Fuses Kit Includes: [35] Slo-Blo and [100] fast-acting fuses with a plastic storage box. 840093 ....$59.95 or $55.95 ea./3+

Fuse Mounting BlocksSingle Black Phenolic. Solder Lug. Measures1/2 x 1-7/8 in. Fits 1/4 x 1-1/4 in. fuse.380030 [A] ..$1.45 or $1.25 ea./10+

Double Black Bakelite. Measures 1 x 2-1/4 in.with 5/8 in. mounting center. Fits 1/4x 1-1/4 in. fuse.380010 [B] ..$3.95 or $3.50 ea./10+

Fuse HoldersInline With 7 in. of #14 insulated wire.380022 [C] ..$3.75 or $3.55 ea./10+

Bayonet-Type With mounting nut. 2-3/16 in. long.Fits 1/4 x 1-1/4 in. fuse.380001 [D] ..$7.95 or $7.15 ea./10+

Post-Type With mounting nut. 15A @ 250V. 380019 [E] ..$1.50 or $1.40 ea./10+

A

B

C

D

E

BD E

F I

J

M

★ NOTE: With Socket.

Page 60: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E60 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS LEDS

STOCK # RATE FIG. COLOR V mA W $ 1-9 $ 10+

260168 4000-800 mcd

i

White 3.5 20 120 .59 .54

260169 Green 3.5 30 120 .90 .81

260170 Red 2.2 20 80 .73 .65

260171 Yellow 2.4 20 800 .97 .87

260172 Orange 2.0 20 100 .37 .34

STOCK # FIG. SEG. PINS COMMON SIZE COLOR $ 1-19 $ 20+

260021

N

7 10 Anode 14 mm Red 1.95 1.75

260022 7 14 Anode 0.3 in. Red .95 .75

590337 7 11 Cathode 0.375 in. Red 1.25 .99

260090 7 14 Cathode 0.3 in. Red 1.25 .99

STOCK # FIG. SEG. SOCKET COLOR $ 1-19 $ 20+

260059

Q

10 20-pin Red 1.99 1.75

260088 10 20-pin Green 2.25 1.95

260089 10 20-pin Yellow 3.25 2.95

LED Readouts

STOCK # COLOR $ 20-99 $ 100+

260020 Red .10 .05

260027 Green .11 .08

260026 Yellow 2.20 1.60

260067 Br. Red 4.40 3.80

Neon Bulb Assembly Includes red indicator and housing.125V AC.260113 [C] ..........................................................$4.95 or $4.45 ea./10+

Neon Bulb Panel KitsIncludes #NE2 neon bulb; colored, plastic, high temperature lens cap;Tinnerman mounting clip; and a 68K, 1/2W current limiting resistor. Soldertabs.115V AC. 7/8 in. long; 11/32 in. dia. 5/16 in. dia. mounting hole.

Xenon Strobe TubeUse for photoflashes. Features a 4KVtrigger with a 200-300V DC anode.260050 ............$5.95 or $5.35 ea./10+

Trigger Coil320037 4K V ......$3.75 or $3.39 ea./10+

A B C D E F G H

Super Bright LEDs

N O P Q

Diffused LEDs [A]5mm. T 1-3/4. Min. order of 20.

STOCK # COLOR $ 20-99 $ 100+

260080 Red .10 .09

260081 Green .14 .12

260082 Yellow .14 .12

Mini LEDs [B]3mm. T1. Diffused. Min. order of 20.

STOCK # COLOR $ 3-99 $ 100+

260075 Red .75 .65

260076 Green .85 .75

260077 Yellow .95 .85

Blinking LEDs [D]5mm. Diffused. Min. order of 3.

STOCK # FIG. TYPE W V AC INCLUDES $ 1-19 $ 20+

260003 A #NE2 .059 — Leads .15 .12

260076 B #WE51 .04 117 Cover 1.25 1.15

$ 10-99 $ 100+

.60 .50260004 - Red • 260005 - Green • 260007 - Blue260008 - White • 260009 - Clear

STOCK # # OF LEGS $ 20-99 $ 100+

260078 2 .29 .25

260079 3 .29 .25

Dual Color LEDs [C]Red/Green, T 1-3/4. Min. order of 20.

STOCK # COLOR $ 1-9 $ 10+

260020 Red .22 .18

260027 Green .22 .18

Rectangular LEDs [E]2 x 5mm, Diffused.

STOCK # COLOR $ 10-99 $ 100+

260102 Red .17 .14

260103 Green .28 .25

260107 Yellow .26 .20

Triangular LEDs [F]Min. order of 10.

STOCK # COLOR $ 3-99 $ 100+

260085 Red .39 .35

260086 Green .39 .35

260087 Yellow .39 .35

Extra Large LEDs [H]10mm. Min. order of 10.

STOCK # # OF LEGS $ 10-99 $ 100+

260104 Red .25 .20

260105 Green .25 .20

260106 Yellow .25 .20

260160 Orange .25 .20

260159 White 1.45 1.29

260158 Blue .89 .80

PC Board Mount LEDs [G]5mm. Min. order of 10. Ultra Violet LED

Use for curing UV adhesives, lightingup fluorescent and phosphorescentmaterials as well as exposing UVsensitive PC boards.260200 [J].......$3.95 or $3.75 ea./10+

Red LED 260153 50 MBPS ..................$14.95

KELVIN® Kel-Pack™

LED Assortment 670 pcs.840485 [M]...$59.95 or $54.95 ea./3+

LED HoldersSTOCK # FIG. SIZE $ 10-99 $ 100+

250020 K 3mm .15 .10

250019 L 5mm .48 .32

I J

K

L M

Panel Meter Display 2-Line, Alpha Numeric.260116 [O] ..............................................................$24.95 or $22.95 ea./3+

Alpha Numeric Display Bright red display. Common anode. 1-3/16 in. high.260137 [P] ..................................................................$6.95 or $5.95 ea./10+

LED Bar Easily adds fast responsemetering to audioand other circuits.

A

C

B

Neon Bulbs

Page 61: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E61Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSBULBS

Bulbs and Holders BoardIdeal for learning activities. Board holds five (5) bulbs. For series or parallel circuits.Includes manual and bulbs.710191 ..................................................................$17.65 or $16.15 ea./10+

C D

LH I J K M

E

FG I J

A B CD E

G H

Threaded E-10 Base Mini Bulbs

Threaded E-5 Base Mini Bulbs

F

★ 14V Bulbs work well with 9V batteries.

★ 14V Bulbs work well with 9V batteries.

A B STOCK # FIG. COLOR V A # QTY. $ 1-9 $ 10+

260016 A Clear 2.2 0.25 222 1 .35 .30

260156 — Clear 2.3 0.27 233 1 .75 .65

260138 B Red 3.5 0.2 — 10 3.25 2.95

260139 C Yellow 3.5 0.2 — 10 3.25 2.95

260140 D Green 3.5 0.2 — 10 4.95 4.45

260019 E Clear 6.3 0.15 40 1 .35 .30

260025 E Clear 6.3 0.25 46 1 .35 .30

260051 — Clear 7.5 0.22 50 1 .35 .30

260024 — Clear 14 ★ 0.2 1449 1 .35 .30

STOCK # FIG. DESCRIPTION QTY. $ 1-9 $ 10+

260127 A 2 Solder Tabs, Insulated 1 2.65 2.25

260154 B 1 Solder Tabs, Bare 1 1.25 .99

250012 C 6 in. Leads, Bare 1 .75 .60

260155 D 2-6 in. Leads, Insulated 1 1.50 1.25

STOCK # FIG. DESCRIPTION QTY. $ 1-9 $ 10+

260062 H Bare 1 .49 .45

250059 I PC Mounting Tabs 10 3.45 3.25

250056 J 2 Solder Tabs 10 3.75 3.55

260129 K Simple 2 Solder Tabs 20 4.95 4.65

250057 L Fits E-10 Base Bulb, Raised, Solder Tab 10 3.95 3.75

250060 M U-Shape Bracket, Recessed, Solder Tab 10 3.95 3.75

STOCK # FIG. DESCRIPTION QTY. $ 1-9 $ 10+

260117 E Fahnestock Clips 1 1.25 1.15250036 F Screw terminal, 1-3/8 in. dia. x 7/8 in. h 10 4.95 4.65250056 G Clip-On, 3/8 in. w, Plastic 10 3.75 3.55

STOCK # FIG. COLOR V A # QTY. $ 1-9 $ 10+

260157 F Clear 2.5 0.27 1769 1 .75 .55

260012 F Clear 6.3 0.04 342 1 .75 .55

Flange Base Mini Bulbs STOCK # FIG. COLOR V A # QTY. $ 1-9 $ 10+

260053 I Clear 2.33 0.27 PR-4 2 2.95 2.75

PC Board Mount Mini BulbsSTOCK # FIG. COLOR V A # QTY. $ 1-9 $ 10+

260109 J Clear 12 0.75 — 1 3.95 3.55

Bayonet Base Mini BulbsSTOCK # FIG. COLOR V A # QTY. $ 1-9 $ 10+

260015 G Clear 2 0.06 49 1 .34 .29

260014 G Clear 6.3 0.25 44 1 .34 .29

260002 G Clear 6.3 0.15 47 1 .34 .29

260023 G Clear 14 ★ 0.2 1815 1 .49 .45

260052 H Clear 14 ★ 0.12 53 1 .34 .29

260128 G Clear 14.4 0.1 1813 1 .65 .55

Pilot Light Housing OnlyRequires 11/16 in.mounting hole. Bulb notincluded. 10 per package.

STOCK # COLOR $ 1-9 $ 10+

260040 Green 4.25 3.95

260041 Red 4.25 3.95

260043 White 4.25 3.95

Bulb Reflectors 10 per package.

STOCK # FITS mm TYPE $ 1-9 $ 10+

260142 14 Submini 4.95 4.45

260141 24 Mini 4.95 4.45

Mini Bayonet Bulb Sockets

Mini Bulb Sockets Fits an E-10 Bulb.

Mini Bulb Sockets Fits an E-10 Bulb.

Page 62: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E62 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS RESISTORS

Ω 1/4 W 1/2W 1 W

10 010016 030016 05001615 010033 030035 05003422 010057 030063 05006127 010065 030071 05006933 010081 030085 05008639 010089 030093 05009447 010101 030106 05010756 010113 030119 05012168 010125 030132 05013582 010137 030145 050148100 010018 030019 050018120 010026 030029 050027150 010035 030038 050036180 010043 030047 050044200 010055 030061 —220 010059 030065 050063270 010067 030073 050071300 010079 030083 —330 010083 030087 050088360 010087 030091 —390 010091 030095 —470 010103 030108 050109510 010111 030117 050119

Ω 1/4 W 1/2W 1 W

560 010115 030121 050123620 010123 030130 —680 010127 030134 050137820 010139 030147 050150910 010145 030153 0501561K 010014 030014 050014

1.2K 010004 030004 0500041.5K 010008 030008 0500081.6K 010010 030010 —1.8K 010012 030012 —2K 010051 030057 —

2.2K 010045 030050 0500472.7K 010049 030055 0500523.3K 010069 030075 0500733.6K 010071 030076 —3.9K 010073 030078 0500784.7K 010095 030100 0501015.1K 010105 030110 0501125.6K 010107 030113 0501156.8K 010119 030126 0501297.5K 010129 030136 —8.2K 010135 030143 0501469.1K 010141 030149 050152

Ω 1/4 W 1/2W 1 W

10K 010017 030017 05001715K 010034 030036 05003516K 010038 — —18K 010042 — —20K 010054 030060 —22K 010058 030064 05006227K 010066 030072 05007033K 010082 030086 05008736K 010086 030090 —39K 010090 030094 05009547K 010102 030107 05010851K 010110 030116 05011856K 010114 030120 05012268K 010126 030133 05013682K 010138 030146 050149100K 010019 030020 050019120K 010027 030030 050028130K 010032 030034 —150K 010036 030039 050037180K 010044 030048 —220K 010060 030066 050064240K 010064 030070 —270K 010068 030074 050072

Ω 1/4 W 1/2W 1 W

330K 010084 030088 050089360K 010088 030092 —390K 010092 030096 050097470K 010104 030109 050110510K 010112 030118 050120560K 010116 030122 050124680K 010128 030135 050138820K 010140 030148 0501511M 010015 030015 050015

1.1M 010003 030003 —1.2M 010005 030005 0500051.5M 010009 030009 —2.2M 010046 030051 0500482.7M 010050 030056 0500533.3M 010070 040050 0500743.6M 010072 030077 —3.9M 010074 030079 0500794.7M 010096 030101 0501025.1M 010106 030111 0501135.6M 010108 030114 0501166.2M 010118 030124 —6.8M 010120 030127 0501308.2M 010136 030144 —9.1M 010142 030150 —

2W Resistors

Ω STOCK # Ω STOCK #

0.51 070150 1.8K 0700111 070149 11K —

2.2 070148 15K 07003210 070015 16K —11 — 18K —12 — 20K 07005230 — 120K 07002647 070099 160K —51 070107 180K —

100 070017 220K 070058110 — 470K 070102120 070025 1M 070014130 — 1.3M —1K 070013 2M —

1.1K 070001 2.7M 070048

Resistors Kel-Pack™

1/2W, 16 Values = 3,200 pcs.

840487, $49.95

Resistors Kel-Pack™

1/4W, 24 Values = 4,800 pcs.

840486, $49.95

Light DependentResistor Top Quality.260125, $2.75

SIPResistors

Bending Gauge 390364 1/4 & 1/2W....................$5.95390365 1W & 2W ......................$5.95

$3.001/4 W Pack of 200

$4.001/2 W Pack of 200

17¢ea. per 10+

12.5¢ea. per 10+

10W Resistors

Ω STOCK # Ω STOCK #

2 100012 50 1000075 100006 75 100020

10 100005 100 100001 20 100014 150 10000825 100015 200 10002235 100017 500 10002847 100019 1K 100002

40¢ea.

38¢ea. per 100+

5W Resistors

Ω STOCK #

5.1 08000010 080001

29¢ea.

13.5¢ea. per 200+

$8.001 W Pack of 50

$18.001 W Pack of 100

STOCK # SIZE PINS $ EA.

010161 22K 10 .48 010162 270K 10 .48 010163 1.8K 8 .48 010164 15K 6 .48 010165 33K 6 .48 010166 47K 6 .48 010167 10K x 9 10 .48 010168 220 x 9 10 .48 010169 3.3K x 9 10 .48

Resistor KitContains five each of 73 standard values from 1W to 1MW, 1/4W. 282452 365 pieces total................................................$13.95 or $12.95 ea./3+

Page 63: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E63Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSCAPACITORS

Polyester Metallized CapacitorsWith radial leads. ±10% tolerance.

Axial CapacitorsElectrolytic capacitors, insulated.

Ceramic Disc Capacitors

Radial CapacitorsElectrolytic aluminum. *NOTE: Low ESR.

Mini Axial CapacitorsElectrolytic, Non-Polarized.

STOCK # VOLTS FARADS pF QTY. $ 1-9 $ 10+

140031

50

4.7 20 3.00 2.75

140038 6.8 20 3.00 2.75

140012 10 20 3.00 2.75

140014 12 20 3.00 2.75

140016 15 20 3.00 2.75

140018 18 20 3.00 2.75

140028 33 20 3.00 2.75

140030 39 20 3.00 2.75

140013 100 20 3.00 2.75

140015 120 20 3.00 2.75

140017 150 20 3.00 2.75

140023 220 20 3.00 2.75

140029 330 20 3.00 2.75

140034 470 20 3.00 2.75STOCK # VOLTS FARADS µF QTY. $ 1-9 $ 10+

140005

50

0.0047 20 3.00 2.75

140004 0.0033 20 3.00 2.75

140003 0.0022 20 3.00 2.75

140001 0.001 20 3.00 2.75

140009 0.022 20 3.00 2.75

140008 0.015 20 3.00 2.75

140007 0.01 20 3.00 2.75

140011 0.1 20 3.00 2.75STOCK # VOLTS FARADS µF QTY. $ 1-9 $ 10+

130001500

0.001 20 3.00 2.75

130008 0.01 20 3.00 2.75

STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

180003 10 47 1 .20 .18STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

180002 16 10 1 .20 .18

180023 16 100 1 .20 .18

180026 16 220 1 .35 .32

180027 16 470 1 .30 .27

180005 16 1,000 1 .50 .45

180029 16 2,200 1 .50 .45 STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

180004 25 47 1 .20 .18

180006 25 100 1 .20 .18

180007 25 470 1 .25 .20 STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

180017 35 10 1 .20 .18

180019 35 22 1 .20 .18

180021 35 47 1 .20 .18

180008 35 1,000 1 .50 .45 STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

180033 35* 100 1 .40 .36

180034 35* 1,000 1 1.20 1.08STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

190037 50 0.1 1 .20 .18

180012 50 1 1 .20 .18

180013 50 2.2 1 .20 .18

180015 50 4.7 1 .20 .18

180018 50 10 1 .20 .18

180022 50 47 1 .20 .18

STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

190028 15 100 1 .25 .23STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

190001

25

10 1 .25 .23

190007 100 1 .27 .24

190008 220 1 .31 .26

190019 470 1 .32 .27

190009 1,000 1 .69 .62STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

190027 35 2,200 1 1.39 1.25STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

190022

50

1 1 .25 .23

190002 4.7 1 .15 .13

190021 10 1 .69 .62

190024 22 1 .30 .27

190018 47 1 .25 .23

190020 100 1 .95 .85

190010 1,000 1 .80 .72STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

190006 450 22 1 2.95 2.65

STOCK # VOLTS FARADS pF QTY. $ 1-9 $ 10+

19004150

4.7 10 3.50 3.30

190013 10 10 3.50 3.30

STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

130055

250

0.01 1 .18 .15

130058 0.1 1 .30 .25

130060 0.22 1 .30 .27

130061 0.47 1 .35 .32

130063 1.0 1 .50 .45

Resin Tantalum Capacitors-55 to +85° C, ±20% tolerance.

STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

190054

16

2.2 10 4.00 3.75

190056 4.7 10 4.50 3.95

190058 10 10 5.50 4.95

190060 22 10 6.50 5.95STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

190052 35 1.0 10 3.50 2.95

Ceramic Monolithic Capacitors

STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

140046

50

0.01 10 1.20 1.08

140047 0.047 10 1.50 1.25

140048 0.1 10 1.50 1.25

140049 0.22 10 1.90 1.70

140050 0.47 10 2.50 2.25

Mini Radial Capacitors

Electrolytic & Axial Capacitor Bulk Pack2 Types x 100 ea. = 200 Total.840490 ....................................................$49.95

Ceramic Disc Capacitor Bulk Pack5 Values x 100 ea. = 500 Total.840489 ........................$49.95

As low as 13¢ ea.

As low as 10¢ ea.

STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

180037 16 100 1 .25 .23STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

180035 35 10 1 .25 .23STOCK # VOLTS FARADS QTY. $ 1-9 $ 10+

180036 50 1 1 .25 .23

Find SUPER CAPACITOR CARSin the CARS chapter on pg. T16-17.

Variable Capacitor Trimmer 15pfd-90pfd. Use for FM microphone and transmitter.130084 ....$2.95 or $2.75 ea./10+

AM SuperHET Variable Capacitor550–17KHz. (15pfd/150pfd) and (15 pfd/70pfd). Includes dial and screw. 10/pkg.990086 ................................$24.95 or $22.95 ea./3+

Page 64: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E64 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONALELECTRONICS INTEGRATED CIRCUITS

Serial EEPROM600225 16kx8..............$2.95 or $2.66 ea./10+

Infrared Opto-Coupler 600040 TIL III ..............$1.19 or $1.07 ea./10+

Semi-Conductors600203 UM3561........................................$2.35

Crystals1MHz

590257, $5.50

3.57MHz 590258, $1.65

7400 Series ICsNOTE: The 7400 IC series isbecoming obsolete. If we’reout of stock, we’ll substitutean equal 74LS00 Series IC.

STOCK # TYPE $ ea.

590088 00 .50590124 01 .40590089 02 .35590125 03 .35590126 04 .40590127 05 .42590090 08 .75590130 09 .35590131 10 .30590132 11 .35590134 13 .55590098 14 .50590135 15 .35590136 20 1.50590108 21 40600122 27 .35600121 30 .30590109 32 .65590143 40 .75600123 42 .45

STOCK # TYPE $ ea.

590272 00 .35590273 02 .35590274 04 .35590275 08 1.25590281 30 35590286 85 .79590291 112 .49590303 161 .59590304 163 .49590327 373 .65590330 393 .79

STOCK # TYPE $ ea.

590001 00 .95590002 01 .40590003 02 .70590004 03 .35590005 04 1.75590006 05 35590007 06 .45590008 07 .45590009 08 .55590011 10 .35590014 11 .75590019 13 .55590029 20 .50590030 21 4.95590033 32 90590034 37 .40590038 42 .90590042 46 1.20590043 47 1.95590045 50 40590046 51 .45590047 53 .55590052 73 .55590053 74 .55590055 76 4.95590057 83 2.70590058 86 1.05590059 89 3.75590012 100 3.45 590096 111 3.45590016 122 85590017 123 .48590097 132 .44590021 145 .59590022 150 1.45590023 151 40590024 153 .40590025 154 1.75590103 155 45850297 157 .40590117 180 .50590028 193 .85850292 197 .85850248 279 .60

STOCK # TYPE $ ea.

590144 47 1.99590145 48 4.45590150 73 45590080 74 .85590151 75 .60590152 76 3.49590110 83 1.95590099 85 64590111 90 .90590156 92 .79590157 93 1.20590160 109 39590161 112 .30590164 122 .55590165 123 1.25590091 125 45590166 126 .45590168 133 .52590092 138 .69590171 139 .45

STOCK # TYPE $ ea.

590172 145 1.25590173 148 90590105 151 .95590093 153 .45590174 154 6.45590175 155 45850271 156 .90590176 157 .45590177 158 .35590178 160 .60590094 161 .45590180 163 .45590181 164 .55590182 165 .85590184 168 .70590185 169 .59590187 173 .48590188 174 .45590190 181 2.25590191 189 3.25

STOCK # TYPE $ ea.

590192 190 4.95590193 191 65590194 193 .65590100 194 .75590197 197 .65590081 240 .68590119 241 .68590120 243 .68590113 244 .75590200 245 .78590076 259 .45590210 266 .45590101 279 .45590213 283 .65590071 367 .45590102 373 .85590095 374 .78

74LS00 Series Integrated Circuits

STOCK # TYPE $ ea.

600124 4001 .65600117 4002 .35590229 4011 .30600118 4012 .65590084 4013 .40850559 4015 .50600120 4016 .49590228 4017 .89600176 4020 .59600177 4023 .29600178 4027 .59600179 4028 .59590334 4029 .60590413 4035 .75600180 4042 .59600181 4046 79600116 4047 .65590106 4049 .50600182 4050 .49600183 4051 .75590107 4066 .49590384 4069 .50600185 4070 .39590343 4078 .45600186 4081 .49590074 4511 .89600187 4518 .75600188 4528 .69600189 4553 3.95 850247 4584 1.10

CD4000 Series ICs

PLLs LM565, 600035,

$1.95 or $1.75 ea./10+

IC Sockets

WIREWRAP

ZIF ROUND

MACHINESOLDER

ZIF FLAT

74HC Series ICs

Anti-Static Foam 4 x 5-1/2 in.470062 [C] ........................$1.45 or $1.25 ea./10+

Anti-Static Mat 18 x 24 in.470060 ..........................$79.89 or $71.90 ea./3+

Elastic Wrist Strap 470061 [D] ..............................$6.95 or $5.95 ea./3+

IC Test Clips The narrow, deep throat brings IC leads up from crowded PC boards for fast signal tracing. Features gripping teeth for scopeprobes and test leads. Clips are made of plastic withnon-corrosive nickel/silver contacts.680008 14-pin ......................$5.95 or $5.45 ea./3+680012 16-pin ......................$6.45 or $5.95 ea./3+680064 40-pin ..................$14.95 or $14.45 ea./3+

DIP IC Extractor Tools [A]450019 LS1, MS1 & SSI ..........$2.95 or $2.90 ea./3+450028 CMOS, MOS & DIP....$22.95 or $21.95 ea./3+

Insertion Tool and Straightener450017 [B] ..........................$22.95 or $21.95 ea./3+

STOCK # PINS TYPE $ 1-9 $ 10+ $ 100+

250013 8 Solder .10 .7 .6250008 14 Wire Wrap 1.35 1.20 1.05250004 14 Solder 10 .7 .6250010 16 Wire Wrap 1.15 .99 .90250005 16 Solder .10 .7 .6250049 20 Solder .85 .80 .75250006 24 Solder .25 .23 .22250011 24 Wire Wrap 1.40 1.30 1.20250038 24 ZIF Round 12.95 12.75 12.50250047 28 Machine 2.95 2.85 2.75250021 28 Solder .20 .18 .16250039 28 ZIF Round 13.95 13.75 13.50250048 28 ZIF Flat 9.95 9.45 8.95250046 40 Machine 3.95 3.85 3.75250022 40 Solder .25 .23 .22

A

B

C

D

Page 65: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E65Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

KELVIN® EDUCATIONAL ELECTRONICSINTEGRATED CIRCUITSOp Amps

Opto-Isolators

Full Wave Bridge Rectifier [C]

Timers STOCK # TYPE $ 1-9

600021 555 ★ .29600029 556 Dual .50590344 NE558 .90600164 7555 .95600172 MC1648 14.95600173 MC1496 1.25

STOCK # A PIV $ 1-4 $ 5+

620103

1

1N4001 .15 .12620045 1N4002 .15 .12620104 1N4003 .18 .14620089 1N4004 .20 .15620090 1N4005 .21 .16620091 1N4006 .22 .17620092 1N4007 .22 .18STOCK # A PIV $ 1-4 $ 5+

620098

4

1N5400 .45 .35620094 1N5401 .48 .38620095 1N5402 .52 .42620096 1N5404 .58 .48620097 1N5406 .65 .54

STOCK # A V DC $ 1-4 $ 5+

320028 0.3 12.6 14.95 13.95320010 1 6.3 11.95 10.95320004 1 12.6 12.95 11.95320005 1 24 12.95 11.95320009 2 12.6 19.95 18.95320047 4 12 22.95 20.95

STOCK # A PIV $ ea.

620099

2

50 .95620100 100 .90620101 200 1.05620102 400 1.35STOCK # A PIV $ ea.

620110

4

50 1.15620111 100 1.34620112 200 1.54620113 400 1.75

ConvertersSTOCK # B TYPE $ 1-9 $ 10+

590247 8 ADC-0804 4.75 4.49 590248 8 DAC-0808 2.45 2.19 STOCK # B TYPE $ 1-9 $ 10+

600209 12 ADCSOIC-16 15.95 14.36

TriacsSTOCK # W TYPE $ ea.

620099

1

ST2/6408 .49620100 SC41D 1.80620101 SC141B 1.80620102 40526 2.70620110 40529 3.95620111 SC40D 6.95

Silicon Power Epoxy Rectifiers [B]

STOCK # A PIV $ 1-4 $ 5+

600002.8

50 3.75 3.45600001 200 1.35 1.10STOCK # A PIV $ 1-4 $ 5+

600012

4

50 .95 80.600013 100 .95 .80600014 200 .89 .79600015 300 1.05 .95600019 400 1.19 1.07

STOCK # W TYPE $ 1-4 $ 5+

600096 1 LM386 .45 .40600022 2 LM380 1.15 1.03600226 20 LM1875T 1.95 1.79600227 68 LM3886T 5.95 5.50600213 1 TDA7052 3.89 3.50

Silicon Controlled Rectifiers [A]

STOCK # A V $ 1-9 $ 10+

620152 8 200 1.99 1.79

Bridge Rectifiers [D]

STOCK # A V TYPE $ 1-9 $ 10+

620145 3 40 1N5822 .99 .89

Shottky Diode

Power Amplifiers

STOCK # mH TYPE $ 1-9 $ 10+

290015 1 PC 1.95 1.75290016 10 PC 1.95 1.75290011 27 — 2.45 2.25290020 150 SA 4.79 4.30290014 100 10 4.95 3.95

Coils

STOCK # TYPE $ EA.

630369 4N26 .69630386 4N30 .69

Power Transformers CT

8051 Microcontrollers

RectifiersA B C D

★BESTBUY!

#600021,25¢ ea.per 10+or 20¢ea. per100+

Diodes

STOCK # TYPE $ 1-9 $ 10+

620042 1N34 .38 .36620043 1N34A .38 .36620071 1N60 .45 .42620072 1N60A .35 .31620033 1N100 1.15 .99620039 1N270 .35 .30620040 1N277 .69 .65620056 1N456 .60 .54620057 1N457A .35 .30620125 1N751 .35 .30620134 1N753 .35 .30620121 1N755 .35 .30620080 1N914 .23 .19620081 1N914A .25 .20620051 1N4148 .24 .20620052 1N4149 .35 .20620136 1N4731 .35 .30620060 1N4764A 1.26 1.21620124 1N5392 .35 .30620064 1N5402 .35 .30620146 3A, 100V .60 .55

STOCK # TYPE $ 1-9 $ 10+

600016 709C .65 .58600018 741C .55 .49600026 1458 .49 .45600147 LM301N .60 .54600148 LM308N 3.95 3.50600149 LM318N 1.35 1.19600027 LM324N .48 .43600034 LM339 .45 .40600171 LM733 1.65 1.60

ArraysSTOCK # TYPE $ 1-9 $ 10+

600174 CA3046 .75 .69590421 ULN2803A .95 .89590269 ULN2003 .75 .69

MicroprocessorsSTOCK # TYPE $ 1-4 $ 5+

590243 Z80A 2.95 2.75590235 8085A 3.95 3.75590232 8088 5.95 5.45

Voltage RegulatorsSTOCK # TYPE $ 1-9 $ 10+

600023 7805 .95 .80 600046 7806 .95 .80 600048 7808 .95 .80 600049 7809 1.15 .95 600050 7810 1.15 .95 600024 7812 1.15 .95 600025 7815 1.15 .95 600051 7818 1.15 .95 600053 7824 1.15 .95 STOCK # TYPE $ 1-9 $ 10+

600213 LM2575N 3.89 3.50600210 LM2576H 7.95 7.65600208 LM2940CT 2.95 2.66600043 LM317K 3.95 3.60 600044 LM317T .85 .70 600093 LM337T 1.45 1.25 600211 LM385BZ .89 .79600045 LM723 1.45 1.25620151 LM78L05 .49 .45

NTE ComponentsSTOCK # TYPE $ 1-9 $ 10+

630319 102 3.15 2.95 630313 103A 1.65 1.45630366 128 1.45 1.35 630306 129 1.95 1.75630385 131 3.95 3.75 630375 152 1.89 1.75630330 159 .95 .89 630351 163A 6.95 6.65 630305 197 2.25 2.05630393 219 4.45 3.95 630321 294 2.45 2.25 600087 970 12.95 11.95

STOCK # FLASH $ 1-9 $ 10+

590432 1K 9.95 9.45590424 2K 10.95 9.95590433 8K 12.95 11.95600214 20K 14.95 13.46

Rectifier Diodes

STOCK # W V $ 1-9 $ 10+

620132

1

2.7 .18 .15620023 5.1 .18 .15620024 5.6 .18 .15620025 6.2 .18 .15620026 6.8 .18 .15620027 7 .18 .15620028 7.5 .18 .15620029 8 .18 .15620030 8.2 .18 .15620031 9.1 .18 .15620032 9.5 .18 .15620006 10 .18 .15620007 11 .18 .15620008 12 .18 .15620009 13 .18 .15620010 14 .18 .15620011 15 .18 .15620012 16 .18 .15620014 18 .18 .15620016 20 .18 .15620017 22 .18 .15620018 24 .18 .15620019 27 .18 .15

Zener Diodes

Page 66: Ideal for a Soldering Station! - Kelvinkelvin.com/content/zPDFs/Cat281/electronics.pdf · Tools: Hand Tools, Mini Drill (with stand and bits), Safety Glasses, Gloves, Helping Hand

E66 Electronics kits, labs and trainers may require soldering, hand tools, electric use and advanced assembly techniques. Adult supervision required.www.kelvin.com • KELVIN®, 280 Adams Blvd., New York 11735, USA • Copyright © Kelvin L.P. • Prices in this catalog represent discounted pricing for educational institutions.

ELECTRONICS COMM. TESTERS

DataCom/Coax Cable TesterOffers easy testing of datacom cables with RJ-11 or RJ-45 connectors and coaxcables. One button operation makes checking cables for opens, shorts, and pairmapping a snap! Locates up to 7 cables after installation. Test the DataCom and coax cables before or after the installation. Mapping functiontests pin-to-pin connection. Check for straight or cross-pinned cables. Identifiespairs and open/short condition. Low battery indicator and auto shut-off. Includesa protective holster and custom molded carrying case. 9V Battery (#590009)included.530178 TCT-455 ................................................................................................$129.95

Telephone Line AnalyzerA telephone line analyzer that tests active phone lines with RJ-11 or RJ-45modular jacks.530180 TWT-1 ........................................................................................................$7.95

Telephone Test SetTests insulation resistance and determines line conditions without help fromthe central office. High impedance monitor mode. Includes last number redial,hook & flash, speaker phone, mute, polarity check, battery check, touch tone,and pulse dialing. High impact material for shock resistance. 9V battery included.530175 Set with Ear Microphone for Hands-Free Use ........................................$214.95

TeleCom Data TesterChecks datacom and coax wires not yet installed—up to 1,500 feet! Both endsof the cable must be plugged into the tester. Includes a unique speech and lightfeature that indicates condition of cable with one press of a button. Identifiesopen, shorted and good cables before installation. Checks RJ-11, RJ-45 and Fconnectors. 9V Battery Included.530176 DCT-1 ......................................................................................................$48.95

Tone Generator/Probe SetIncludes both a probe and generator. Quickly locate wires in applications suchas TeleCom, Networking, CATV. HVAC, Electrical and Automotive Circuits. Locatetermination point of all types of communication cables. Single or dual tone withadjustable volume, audible continuity on Telco and bare wires, LED signalconfirmation. Probe works with any tone generator, Non-conductive plastic tipfor safety. Low battery indicator. Carrying case Included530177 Tone Generator and Probe Set ................................................................$48.95530179 Tone Probe Only ......................................................................................$23.95

AC Outlet Analyzer Plug the AC Outlet Analyzer into any 3-wire (grounded) 120V AC outlet to checkfor faults. 740096 ......................................................................$10.95 or $9.89 ea./3+

Neon Circuit Tester Neon lamp glows to indicate voltages from 90 to 300 volts, AC or DC. Use tocheck AC outlets, cables, circuits in equipment and much more. 340023 ......................................................................................$1.95 or $1.75 ea./6+

Magnetic TesterFor science and electronics. Finds North and South poles of magnetic fields.Two-color LED and buzzer indication. Includes two LR44 batteries.740118 ....................................................................$17.95 or $16.95 ea./3+

KELVIN® EDUCATIONAL