İDİLLAB MATERIAL TESTING EQUIPMENT COMPANYcannesbiotech.com/wp-content/uploads/2018/03/CATALOGUE-Katalog.pdf · EN 933-1, 933-2 - UNI 2331, 2333 - UNE 7050 All Sieves are made with

İDİLLAB MATERIAL TESTING EQUIPMENT COMPANY

İDİLLAB MATERIAL TESTING EQUIPMENT CO.

Page 1


Aggregates represent the mainly used product in the building industry; they are used in concrete, bituminous conglomerates, plasters, road and railways subgrades... etc. The different International Standards together with the new European Standards EN are requiring many different checks on different features as: mechanical, physical, geometrical, kind of density, strength, degradability, etc. A rock stratum will undergo alterations in the mechanical characteristics when it is exposed to excavations, handlings etc. For above reasons a study of the mechanical characteristics of an intact rock becomes

indispensable in order to analyse the relative characteristics when realising underground or

surface structures as galleries, quarries and foundations.


Page 2


ANALYTICAL PRODUCT INDEX AGGRAGATES/ROCK

Catalogue No PRODUCT NAME STANDARDS PAGE

İ/A-007 DRYING OVENS EN 932-5,1097-5,ASTM C127-136 3 İ/A-024 MUFFLE FURNACE EN 196-2,196-21,459-2 4

İ/A-106 MELTING POT 5 İ/A-025 SPEEDY MOISTURE TESTER ASTM D4944/AASHTO T127 5 İ/A-021 MOISTURE METER 5 İ/A-035 DESICATORS WITH AND WITHOUT VACUMM 6 İ/A-048 BAR GRID SIEVES EN 933-3 6 İ/A-049 FLAKINESS SIEVES BS 812 7 İ/A-052 TEST SIEVES WIRE EN 933-1,933-2,AASHTO T27 7 İ/A-031 TEST SIEVES PERFORATED EN 933-2,BS 410 8 İ/A-045 WET WASHING SIEVES ASTM E11 9 İ/A-060 SIEVE SHAKER MOTORIZED 9 İ/A-061 HIGHT CAPACITY SIEVE SHAKER 9-10 İ/A-062 SAMPLE SIPLITTERS (RIFFLE BOXES) EN 933-3,ASTM C136,AASHTO T27,87 11 İ/A-068 LARGE CAPACITY SAMPLE SIPLITTER EN 933-3,ASTM C136,AASHTO T27,87 11 İ/A-069 BULK DENSITY AND VOIDS MEASURES EN 1097-3,ASTMC29,97,AASHTO T19,93 12 İ/A-070 FLAKINESS/THICKNESS GAUGE BS 812 12 İ/A-071 LENGTH GAUGE BS 812 12 İ/A-072 SHAPE GAUGE(SHAPE INDEX) EN 933-4,-5 12

İ/A-081-01 CRUSHING RESISTANCE DETERMINATION EN 13055-1 13 İ/A-073 EFFLUX INDEX APPARATUS 13 İ/A-075 LOS ANGELES ABRASION MACHINE EN 1097-2,12697-17,-43,ASTM C131 13 İ/A-078 MICRO-DEVAL TESTING MACHINE EN 1097-1 14

İ/A-080-04 AGGREGATE IMPACT VALUE APPARATUS BS 812 14 İ/A-124 FILLER COMPACTION APPARATUS EN 1097-4 15 İ/A-082 AGGREGATE CRUSHING VALUE APPARATUS BS 812 15 İ/A-090 LABORATORY CONE CRUSHER 16 İ/A-092 LABORATORY JAVS CRUSHER 16 İ/A-091 JARR MILL 17 İ/A-111 ABRASION MACHINE (FORMERLY DORRY) EN 1097 17 İ/A-128 ACCELERATED POLISHING MACHINE EN 1097-8,1341,1342,1343 18 İ/A-105 CALCIMETER 18 İ/A-117 END –OVER –END SHAKER BS 1377:2 19 İ/A-112 ABRASION TESTER FOR NATURAL STONES EN 1338,1341,1342,1343,14157 19 İ/A-107 DETERMINATION OF DRYING SHRINKAGE EN 1367-4 19

İ/A-122-10 TILT TEST 20 İ/A121 ROCK CRADLE ASTM 5873 20 İ/A-125 DIGITAL POINT LOAD TESTER ASTM D5731 21 İ/A-126 DIGITAL BRAZILIAN TESTER 21 İ/A-300 SPECIMEN GRINDING MACHINE 22 İ/A-130 SLAKE DURABILITY APPARATUS ASTM 4644 23 İ/A-129 PORTABLE ROCK SHEAR BOX ASTM D5607 23


Page 3

http://www.idillab.com/index.php?lang=en&page=13&anIIcat_1=4&anIIitm_1=135


DRYING OVENS Standards: EN 932-5,1097-5,ASTM C127-136

Natural convection, digital thermoregulator-indicator. Designed for drying, baking, conditioning and moisture determination. Sturdy manufacture, double walled with 60 mm thick glass fibre for thermal insulation. Exterior front part is stainless steel made; while interior chamber, grid shelves and external walls are made from zinc coated steel. Temperature from ambient to 200°C. is controlled by a digital thermoregulator-indicator. The oven is equipped of a dual safety thermostat with higher thermic threshold to prevent accidental over-temperatures, and to ensure safe working conditions. The oven is supplied complete with two grid shelves easily removable and that can be positioned at various heights, pilot light, exhaust holes for fast cooling.

Power supply: 230V 50-60Hz 1ph Inside dimensions: 600X610X600 mm Outside dimensions: 840X725X805 mm Doors: n.1 Wattage: 2000W Weight: 60 kg

PRODUCT CAPACITY INSIDE OUTSIDE DOORS WATTAGE WEIGHT

CODE LITRES DIMENSIONS mm DIMENSIONS mm

İ/A-007 50 350X350X400 590X460X620 1 750 40

İ/A-008 100 400X420X600 650X515X810 1 1200 50

İ/A-009 220 600X600X610 840X725X810 1 2000 70

İ/A-010 440 900X700X700 1140X760X910 2 3600 100

İ/A-011 750 900X650X1250 1250X700X1600 2 5000 140

İ/A-012 1000 900X800X1400 1250X900X1700 2 7000 200


Page 4


MUFFLE FURNACE Product Code: İ/A-024 Standards: EN 196-2,196-21,459-2

For the highest avaible temperatures..

İMF Series general purpose furnaces have maximum operating temperature of 1100 C and can be used for a wide range of applications in many different sectors such as metal, ceramic and food industry, jewelry and dentistry. Their perfect design is ideal for: .

Ashing organic and inorganic samples, Firing and sintering of ceramic , stoneware and porcelain, Melting, annealing, hardening, tempering, stress relieving and

heat treatments of ferrous and non-ferrous metals, Thermal aging, Chemical decomposition, Thermal shock testing,

High temperature tests of compenents or finish products,

The chamber of İMF Series furnaces is made of vacuumed fiber board and

refractory bricks. By means of the high grade insulation made of fiber

board, very good temperature homogeneity is obtained in the chamber .

The chimney for discharging the vapors occuring during the operation is

offered as standard. MKF Series furnaces are equipped with PID

microprocessor control system which has temperature displays for actual

and set temperatures. .

Growth rate per minute, 4 Pcs backbone of the program, 1 Fixed Program,


Page 5


MELTING POD Product Code:İ/A-106 Standards:

SPEEDY MOISTURE TESTER Product Code:İ/A-025 Standards: ASTM D4944/AASHTO T127

Used to melt wax and other materials, it maintains heat from room temperature to max. 150°C, with accuracy ± 1,5°C. Complete with adjustable thermostat and pilot lamp fully isolated to CE requirements. Capacity: 3 litres Inter nal dimensions: Ø 200x160 mm.

Power supply: 220-240 V 50 Hz 1ph 800W

The Speedy Moisture is a portable system comprising a vessel with an integral pressure gauge a weighing scale and a carry case. A small sample of the material is prepared, weighed and placed into the vessel. The reagent is then added and the vessel is sealed and shaken to mix the reagent with the sample.

MOISTURE METER Product Code: İ/A-021 Standards:

Measurement Principle: Time-domain measurement

methods

Measurement Units: Percent volumetric water content

Resolution: 0.1% volumetric water content

Accuracy: ±3.0% volumetric water content with electrical

conductivity < 2 mS/cm

Range: 0% to saturation (Saturation typically around 50%

volumetric water)

Battery/Life: 4 AAA alkaline batteries; approximately 12-

month battery life

Data Logger: 3,250 measurements without GPS; 1,350 with

GPS/DGP

İDİLLAB MATERIAL TESTING EQUIPMENT CO. Page 6


DESICATORS WITH AND WITHOUT VAKUMM Product code: Standards:

BAR GRID SIEVES Product Code:İ/A-048 Standards: EN 933-3

The frame is anodized aluminium made and

the grids are from “stainless steel rod bars

having diameter from 5 to 15 mm”

according

to the slot widths. Sieve sizes, slot width tolerances and rod bars diameter are checked one by one, and meet EN 933-3 Standard. Weight: 4 Kg each sieve.


Page 7


FLAKINESS SIEVES Product Code: İ/A-049 Standards: BS 812

TEST SIEVES Product Code: İ/A-052….İ/A-031 Standards: ASTM E 11 - AASTHO T27 - BS 410 - NF X11-504 - ISO 3310 - DIN 4187/1 - EN 933-1, 933-2 - UNI 2331, 2333 - UNE 7050

All Sieves are made with stainless steel woven wire and frame and meet International Specifications. The Sieves are available in the following diameters: 200 –

203,2 - 300 – 304,8 - 400 - 450 mm


Page 8



Page 9


WET WASHING SIEVE Product Code: İ/A-045 Standards: ASTM E11

Stainless steel frame and cloth having 0,074 mm opening (ASTM N. 200) Models: i/A045 Dia. 200 mm by 200 mm height

i/A045-01 Dia. 200 mm by 100 mm height

HIGHT CAPACITY SIEVE SHAKER Product Code: İ/A-061 Standards:

SIEVE SHAKER MOTORIZED Product Code: İ/A-060 Standards:

Sieve Shaker is activated by an electric motor. It can hold up to 8 Sieves dia. 200 mm or 8” plus pan and lid, and it is possible to perform also wet sieving tests Provided of timer 0-60 Min Power supply:220-240 volt 0.18 kw 3000 rpm Dimension:340x340x1200 Weight:20kg

Designed for sieving considerable quantities of any material. The screen shaker accepts up to 30 litres (60 ÷ 70 Kg) of sample. Sturdy made, the machine can hold six screen trays and dust pan. Supplied complete with dust pan, but “without” screen trays to be ordered separately. Provided of timer 0-60 minutes. Power supply 220-240 V 50 Hz 1ph 750 W Dimension : 585 x 790 x 850 Weight : 180 Kg.




Page 11


SAMPLE SIMPLITTERS (RIFFLE BOXES) Product Code: İ/A-062 Standards: EN 933-3,ASTM C136,AASHTO T27,T87

Used for the rapid preparation of representative samples. Made of sheet metal. Each sample splitter is supplied with two metal containers

LARGE CAPACITY SAMPLE SIPLITTER Designed for the reduction İ

Product Code: /A-068

of test samples which are too

Standards: EN 933-3,ASTM C136,AASHTO

T27,T87

large in volume to be

conveniently handled. It

handles any material from

sand sizes up to dia. 108

mm. Each chute bar is 12

mm wide so that openings of

12-24-36-48-60-72-84-

96-108 mm are possible.

Complete with two

collecting pans.

Clam shell hopper: 30 litres

capacity



BULK DENSITY AND VOIDS MEASURES Product Code: İ/A-069 Standards: EN 1097-3,ASTM C29,97,AASHTO T19,T93

FLAKINESS /THICKINESS GAUGE Product Code: İ/A-070 Standards: BS 812

Used to determine the loose bulk density and voids of aggregates. Stainless steel made, the 10 and 20 litres models have handles İ-A069

Measure 1 litre cap. İ/A069-01 Measure 5 litres cap. İ/A069-02 Measure 10 litres cap. İ/A069-03 Measure 20 litres cap.

To verify if aggregate is flaky;

i.e. if its thickness is less than

0,6 of its nominal size.

Constructed of heavy gauge

stainless steel sheet

Weight : 600 g

LENGTH GAUGE Product Code : İ/A-071 Standards : BS 812

SHAPE GAUGE (SHAPE INDEX) Product Code:İ/A-072 Standards: EN933-4,5

To determine if aggregate is elongated; i.e. if length is more than 1,8 of nominal size. Mounted on a hardwood base. Weight : 1 Kg

For measuring the length/thickness ratio of individual particles Weight : 500 g



CRUSHING RESISTANCE

DETERMINATION Product Code:İ/A-

081-01 Standards: EN 13055-1

Apparatus for the determination of the crushing resistance of lightweight aggregate, composed by: ring with adjustable height, upper and lower cylinder piston, base. Made of steel, plated against corrosion Dimensions: 180 mm dia. by 260 mm height Weight: 16 kg.

LOS ANGELES ABRASION TESTING MACHINE Product Code: İ/A-075 Standards: EN 1097-2,12697-17,-43,ASTM C131

EFFLUX INDEX APPARATUS Product Code:İ/A-073 Standards:

Used to measure the efflux index of

fine aggregates (shape and

angularity), having dimensions up to

4 mm. The efflux index of an

aggregate is the required time in

seconds of a known volume of

aggregates to flow from a known

opening. The unit is basically formed by a container, two polycarbonate

funnels having 85 mm height, 60°

conical part, which end has dia. 12

or 16 mm., base support, valve,

decanter.

Dimensions: 200x240x h600 mm Weight: 8 kg approx.

Used to measure the resistance of aggregates to abrasion. The machine has a steel frame that supports the drum. 1 hp electric motor and speed reducer turn the drum at 30-33 rpm. Abrasive charges (standard size and weight according to the standards) are to be ordered apart. Galvanised steel tray for the collection of material. The electronic control panel consists of a mains switch, start/stop button and programmable 5 digit revolution counter (with automatic stop at end of cycle). Power: 220 V, 50 Hz, single phase, 750 W.

Dimensions: 1100 x 1000 x 1140 (h) mm. Weight: 320 kg.



MICRO-DEVAL TESTING MACHINE Product Code:İ/A-078 Standards: EN 1097-1

To determine the resistance to wear of aggregates contained in a rotating cylinder with abrasive charges. The machine essentially comprises a heavy steel frame on which four stainless steel cylinders dia. 200x154 mm are mounted. Programmable revolution counter with automatic stop at the end of cycle. Supplied complete with 20 kg of stainless steel spheres dia. 10 mm.

Power: 220 V, 50 Hz, single phase, 750 W. Dimensions: 1500 x 500 x 650 (h) mm. Weight: 140 kg. Paslanmaz çelik 200 çap 154 mm uzunluğunda silindir Standard stainless steel cylinder, dia. 200 by 154 mm long.

AGGREGATE IMPACT VALUE APPARATUS Product Code :İ/A-080-04 Standards: BS 812

Determines the aggregate impact value of

aggregate which provides a relative measure of

the resistance of an aggregate to sudden impact. Manufactured from plated steel, it is very robust

and comes complete with an automatic counter

to count the number of blows to each sample. Also supplied with cylindrical measure and

tamping rod. Size: 444x300x879mm


Page 15


FILLER COMPACTION APPARATUS Product Code: İ/A-124 Standards: EN 1097-4 - BS 812 - CNR N. 23 - NLT 177 -

The apparatus consists of: - cylinder having inside dia. 25,4 mm; - plunger freely sliding into the cylinder with max. lateral play of 0,20 ± 0,05 mm; - four columns and metallic base holding the whole.

To perform the test a measuring device (vernier

caliper with 0,01 mm accuracy) is required: see

accessory.

Weight: 4 kg

AGGREGATE CRUSHING VALUE APPARATUS Product Code: İ/A-082 Standards: BS 812

Comprising 150 mm nominal

diameter steel cylinder, plunger,

base plate, tamping rod and

measure 115 mm diameter x 180

mm deep. Used for aggregate

passing 12.7 mm and retained by

9.52 mm sieve. The complete assembly is cadmium plated for corrosion protection. Weight: 20 Kg


Page 16

http://www.matest.com/productsearch.asp?ric=1&lg=EN&find_standard=EN%201097-4

http://www.matest.com/productsearch.asp?ric=1&lg=EN&find_standard=BS%20812

http://www.matest.com/productsearch.asp?ric=1&lg=EN&find_standard=CNR%20N.%2023

http://www.matest.com/productsearch.asp?ric=1&lg=EN&find_standard=NLT%20177


LABORATORY CONE CRUSHER Product Code:İ/A-090 Standards:

LABORATORY JAVS

CRUSHER Product

Code:İ/A-092 Standards:

Cone crusher is a quick way mass of material used to make small

particles. Principles study of two

conical shaped inner convex and

concave part formed by the

fragmentation of income. These parts are made of special material and 55-60 HRC hardness has been. The overhead material from the funnel-shaped container is inserted into the machine. Return on average between 700-850 rpm machines operate by hand manually control the rotational speed and edilebilmektedir.sabit It is possible to obtain variable piece sizes. These areas have a wide variety of materials, aggregates, coal, cement, plastic, fly ash, etc. tip.

MAXIMUM SIZE MM 0,5-1-1,5-2 to 10 mm in size SAMPLES ARE DESIGNED FOR ADVICE.

Feed Size: 100 * 100 mm.max. Material Output: <3 MM.MM the Jaws: Mn alloy (16-18%) Motor Power: 1.5 KW

High crushing ratio sahiptir.100 mm to 0-5 mm particle material can be brought at one time. Medium, high hardness of the material used, basalt, clinker, ceramics, concrete, glass, granite, minerals, slag vb.örnek trial with positive results have been made. Sturdy of the construction, design konpakt The platform can be mounted on the bench drawers Between the jaws '0 'is brought to the point to take 0-3 mm grain size Between the jaws easy cleaning Insured motor with safety switch



JARR MILL Product Code:İ/A-091 Standards:

Designed to reduce from 5 mm to powder granulometric materials like: cement, stones, rocks, hard materials. Three models available: 0,3 - 1 - 1,5 litre jar capacity. Jar is in prokorund material with relevant hard porcelain spheres Noise reduction steel cabinet and microswitch to 89/392/CEE Directive. Built in timer. Supplied complete. Rpm: about 400 Power supply: 220-240 V 50 Hz 1ph 750W Dimensions: 350x710x410 mm Weight: 50 Kg

ABRASION MACHINE (FORMERLY DORRY) Product Code: İ/A-111 Standards: EN 1097-8, BS 812:3

The test gives a measure of the resistance of aggregates to surface wear by abrasion. Inadequate abrasion of road-surfacing aggregates means

an early loss of the texture depth required to maintain

high-speed skidding resistance.

The machine consists of a heavy duty mainframe on

adjustable feet, steel lap wheel 615 mm diameter, that

rotates in a horizontal plane at 28/31 r.p.m., precision

machined steel shaft and sealed bearings, resilient mounted

electric gearmotor, scraper blades for sand removal,

revolution counter.

Supplied complete with two specimen moulds, two

trays, weights, fixing device. Power supply: 230 V 1ph 50/60 Hz

Dimensions: 1130x710x1100 mm Weight: 200 kg


Page 18


ACCELERATED POLISHING MACHINE PRODUCT CODE:İ/A-128 STANDARDS:EN 1097-8,EN 1341,1342,1343/BS 812:114

It measures the resistance of road aggregates, paving stones, paving blocks, to the polishing action of vehicle tyres on a road surface. The specimens are manufactured with suitable moulds. The specimen is than located on the Road Wheel accepting 14 specimens. The wheel is now rotated and enters in contact with solid rubber tyre, spring loaded. Abrasive charges are continuously introduced by two automatic mechanical feeders (hoppers). The feeders are held by a suitable support disjoined from the machine body; this solution saveguards feeding calibration and realiability/life of the hoppers from the influence of test execution vibrations. Road wheel speed: 310 to 330 r.p.m. The water is supplied at a controlled rate through a water container equipped with flow regulator. The digital control panel, foreseen in the back side of the machine, allows to select the test time. During the test execution the display shows the remaining time and the speed rotation of the wheel holding the specimens. The machine provides a method of preparing polished stone specimens for use with the Skid Resistance Tester The unit is supplied complete with 2 rubber wheels (one for corn and one for flour emery), set of 4 secimen moulds and 2 mould covers, while control stone, corn and flour emery have to be ordered separately (see accessories).

Power supply: 230 V 50 Hz 1ph 750W Dimensions: 1800x820x600 mm Weight: 175 kg

CALCIMETER Product Code:İ/A-105 Standards:

For determining the CaCO3 in limestone and lime marl. Comprising a glass container and connected gas-holder. A reaction in the glass container between the sample calcium carbonate and a solution of diluted hydrochloric acid produces carbon dioxide which is subsequently measured in the gas-holder. This volume can be used to calculate the

CaCO3 content of the sample.

Dimensions: 275 x 200 x 1100 (h) mm

Weight: 12 kg



END-OVER SHAKER ABRASION TESTER FOR NATURAL STONES

Product Code:İ/A-117 İ

Standards: BS 1377:2

Product Code: /A-112

Standards: EN 1338,1341,1342,1343,14157

The End over End Shaker is used to determine the specific gravity of soils containing up to 10% particles retained on a 37.5 mm sieve, it rotates two gas jars at approx 50 rpm to satisfy BS Standard. The shaker is equipped with an original friction device.

Used to determine the resistance to deep abrasion of natural stones and concrete products. Abrasion resistance is determined by measuring the length of the groove produced in the surface of the specimen by a disc rotating at constant speed and pressure. Disc speed is controlled electronically with automatic stop after the set number of revolutions has been reached. Supplied with: 5 kg of white corundum Disc: 70 mm thick Max. sample dimensions: 100 x 100 x 60 mm Power supply: 230V 50Hz 1PH 800 W Dimensions: 530 x 480 x 830 mm Weight: 70 Kg

DETERMINATION OF DRYING SHRINKAGE Product Code:İ/A-107

Standards: EN 1367-4 PRISM MOULD 50 x 50 x 200 mm,

three gang, complete with steel inserts,

to determine the thermal properties and

the weathering of aggregates in drying

shrinkage of concrete.

The test is developed on concretes of

fixed mix proportions and aggregates of

20 mm max. size.

Weight: 8 kg



TILT TEST

Product Code:İ/A-122 Standards: .

The instrument measures the roughness coefficient of a rock specimen or of a joint. The sample is usually a rock core cut in half lengthwise, or a core placed on another two. The unit is also designed to test the possible fluage tendency of bituminous mixtures covering a slope of a dam subject to high sun radiations. The fluage tendency is the permanent viscous deformation of a material. The apparatus consists of an inclined adjustable plane on which the sample is placed. Inclination angle: 0 - 50° Max. sample diameter: 100 mm The plane is slowly tilted until sliding of the upper surface of specimen on the lower one occurs. The roughness index can be evaluated from the measured inclination angle. Dimensions: 270 x 175 x 265 mm. Weight : 5 kg approx.

ROCK CRADLE Product Code:İ/A-121 Standards: .ASTM D5873

ROCK CRADLE, universal

model to locate EX to NX

core rock specimens during

the classification tests by the

Rock Hammer mod. Weight:

10 Kg

ROCK TEST HAMMER Product Code:İ/A-380 Standards: .ASTM D5873

This impact hammer is used for rock classification test. The core rock specimen normally NX 54,7 mm diameter is held on a special cradle (accessory) in horizontal position, and the hammer tests the same in all its length, to obtain an average of the readings. Weight: 2 Kg



DIGITAL POINT LOAD TESTER Product Code:İ/A-125 Standards: .ASTM D5731

Used to determine the strength values of a rock and concrete specimen both inthe field and in the laboratory.It consists of a load frame for applying loads up to 50 KN, on whicha manual hydraulic jack is mounted. The instrument accepts corespecimens up to 4” (101,6 mm) diameter which are loaded bytwo coneshaped points. A graduated scale indicates the distancebetween the conical points. The applied load is measured by a pressure.transducer with a digital display unit range 0-50kN or 0-100 kN,

DIGITAL BRAZILIAN TESTER Product Code:İ/A-126 Standards: .ASTM D5731

The instrument is useful for testing specimen from 50mm dia to 100mm and of thickness of half the diameter. This is to test for indirect measurement of tensile strength of rocks. The specimen is held in circular jaws, this is primarily similar to a compression machine and consists of a small load frame having sturdy base with two vertical threaded rods and an adjustable cross head. The hydraulic jack is fitted at the centre of the base of the load frame. The jack of the load frame is self retracting and two plain platens are supplied. Apressure gauge capacity 0-100 kn x 1 kn is fixed at the base of jack. A maximum pointers is also provided on the gauge, a pair of semi circular platens for 50mm dia samples also provided. The instrument can be used in field als


Page 22


SPECIMEN GRINDING MACHINE Product Code:İ/A-300 Standards: .EN 12390-3,ASTM D 4543

Used to grind and polish concrete specimens, natural stones, ceramic materials, etc. The cube and cylinder specimens can be easily locked on the table and the grinding head 330 mm dia. can be radially moved either manually or automatically in both directions so the only manual operation requested is the lowering of the grinding head by the top hand wheel. The machine is supplied complete with safety chip guard – that when removed stops automatically the machine –, coolant tank, motor pump and one set of abrasive sectors. Diamond grinding sectors are available on request. The machine is supplied complete with clamping element for 100, 150 and 200 mm cubes. Clamping devices for cylinders and device for dry grinding procedure are also available on request. (See accessories) Dimensions:1300x1400x1750 mm Weight:750 kg


Page 23


SLAKE DURABILITY TESTER Product Code:İ/A-130 Standards: .ASTM 4644

PORTABLE ROCK SHEAR BOX Product Code: İ/A-129 Standards: .ASTM 5607

This equipment has been developed to assess the durability of rock to weakening and disintegration when subjected to the simulated effects of climatic slaking. The rock samples are dried and then submitted to wear stress inside a drum which is rotated into water. The test is performed different times and the wear is given by the loss in weight of the sample. The system incorporates a motor drive unit mounted on a baseplate which revolves two (or up to four) stainless steel drums manufactured from 2 mm mesh, 140 mm dia. x 100 mm long. The tanks are filled with water to a level 20 mm below the drum axis. A digital timer automatically stops the motor after the preset time. The equipment is supplied complete with two drums with tanks, and it can accept two additional drums (see accessory).

Power supply: 230V 1ph 50Hz 250W Dimensions: 350x740x300 mm approx. Weight: 30 kg approx.

The portable shear box is used for practical rock testing either in the field or laboratory.

The apparatus consists of a shear box in two parts which can accept a maximum sample size of 115mm x 125mm or cores of up to 102mm diameter. The lower half is fitted with two rams for reversible shearing action, and the upper half is fitted with a ram for normal load application.

The apparatus consists of: 2 Hydraulic Pumps 2 Pressure Gauges 2 Pressure Pipes 1 Dial Gauge 25mm x 0.01 divisions 2 Aluminium formers with Perspex sides



The use of bituminous materials is mainly addressed to roads construction. The asphalt, named also bitumen, is mainly composed by aggregates and binder, with an infinite variation of mixtures. It is therefore necessary to get suitable equipment to perform different test methods and to determine: binder content, internal friction, cohesion, consistency, softening point, viscosity, quality of aggregates, voids percentage, Marshall test, and many other parameters. The equipment described in this Section largely satisfies all these test procedures.


Page 25


ANALYTICAL PRODUCT INDEX ASPHALT/BITUMEN


İ/B-008 AUTOMATIC BINDER EXTRACTION UNIT EN 12697-1,13108 27 İ/B011 CENTRIFUGE EXTRACTOR 1500/3000 g CAPACITY EN 12697-1,ASTM D2172,AASHTO T164A 27 İ/B-014 CONTINUOUS FLOW FILTERLESS CENTRIFUGE EN 12697-1,13108 28 İ/B-021 SOLVENT RECOVERY STILL ASTM D4944/AASHTO T127 28

İ/B-016-10 HOT EXTRACTOR ST EN 12697-1,14,EN 13108 28 İ/B-016-20 SOXHLET MODIFIED METHOD EN 12697-1,13108 29

İ/B-061 KUMAGAWA EXTRACOR EN 12697-1,13108 29 İ/B-019 REFLUX EXTRACOR ASTM D2172,AASHTO T164 B 29 İ/B-067 VAKUUM PYKNOMETER 10 LT EN 12697-5,13108 29 İ/C319 PAVEMENT CORE DRILLING MACHINE 30 İ/B-025 ASPHALT MIXER EN 1697-35 31 İ/B-033 AUTOMATIC MARSHALL COMPACTOR EN 12697-10,12697-30 32 İ/B-042 MARSHALL COMPRESSION MACHINE SEMI AUTO EN 12697-34,13108,ASTMD1559 33 İ/B-043 DIGITAL MARSHALL COMPRESSION MACHINE EN 12697-34,13108,ASTMD1559 33 İ/B-052 DIGITAL MARSHALL WATER BATH EN 12697-34 , ASTM D1559 34 İ/B-051 DIGITAL MARSHAL WATER BATH COOLING SYSTEM EN 12697-34 , ASTM D1559 34 İ/B-053 VIALIT BINDER ADHESION TEST EN 12272-3 34 İ/B-056 DIGITAL PENETROMETER EN 1426,ASTM D5 35 İ/B-059 AUTOMATIC DIGITAL PENETROMETER EN 1426,ASTM D5 35 İ/B-054 DUCTILOMETER EN 13589,13398,ASTM D113 36 İ/B-055 DUCTILOMETER COOLING SYSTEM EN 13589,13398,ASTM D113 36

İ/B-055/A DUCTILOMETER FULL AUTOMATIC SYSTEM EN 13589,13398,ASTM D113 37 İ/B-066 ROLLING THIN-FILM OVEN EN 12607-1 38 İ/B-064 ASPHALT OVEN WITH ROTATING SHELF EN 12607-2,13303,ASTM D6,D1774 38 İ/B-072 RING AND BALL SOFTENING APPARATUS EN 1427,ASTM D36,AASHTO T53 38 İ/B-070 AUTOMATIC RING AND BALL SOFTENING APPRT. EN 1427,ASTM D36,AASHTO T53 39 İ/B-071 WILHELMI SOFTENING POINT APPARATUS EN 1871 39 İ/B-063 EMULSIFIED ASPHALT DISTILATION APPARATUS EN 1431,ASTM D244 39 İ/B-087 DIGITAL SAYBOLT VISCOMETER ASTM D88,AASHTO T72 40 İ/B-080 ENGLER DIGITAL VISCOMETER AASTM D940,AASHTO T54 40 İ/B-081 KINEMATIC VISCOMETER 41 İ/B-084 REDWOOD DIGITAL VISCOMETER EN 12846 41 İ/B-086 CLEVELAND OPEN CUP FLASH POINT TESTER EN 22592,ASTM D92 42 İ/B-094 PENSKY-MARTENS DIGITAL FLASH PINT TESTER EN 22719,ASTM D93,AASHTO T73 42 İ/B-098 SURFACE IREGULARITY TRAVELLING BEAM DEVICE 43 İ/B-099 MOT STRAIGHT EDGE EN 13036-7 44 İ/B-100 BENKELMAN BEAM APPARATUS AASHTO T256,T77 44 İ/B-103 PLATE BEARING EQUIPMENT 200 KN 44


Page 26


AUTOMATIC BINDER EXTRACTION UNIT Product Code:İ/B-008 Standards: .EN 12697-1,13108

EN• ASTM • AASHTO used for automatic extraction of asphalt mix with fi ller content determination and bitumen calculation by difference method. The asphalt mixture is placed on top of the sieves (20-1150..) and by use of trichloroethylene (perchlorethylene on option), vibration and centrifuge extraction divided into aggregates, fi ller and binder-/solvent mixture. The solvent is automatically recovered by use of attached recovery still and is used again for the next extraction. Minerals and fi ller have to be dried after extraction. Max. quantity per extraction appr. 3.5 kg of asphalt mixture. Extraction time appr. 35 min. without drying of minerals and fi ller. Supplied with 3 centrifuge cups 20- 0330. Sieve sets 20-1150... and under frame 20-1125 to be ordered additionally. Dim. appr. 1050x750x1400 mm. 220 V, 50 H, 3 P+N+PE, 3.5 kW.

CENTRIFUGE EXTRACTOR 1500/3000 GR Product Code:İ/B-011 Standards: .EN 12697-1,ASTM D2172,AASHTO T164A

Used for the determination of bitumen percentage in bituminous mixtures. It consists of a removable, precision machined aluminium rotor bowl and cover (accessory 1500 or 3000 g capacity), housed in a sheet box. The electronic pot drives the bowl speed rotatorion ramp from 0 to 3000 rpm

Power supply: 220-240 V 1ph 50/60 Hz 250 W Dimensions: 580x300x480 mm Weight: 50 Kg


Page 27


CONTINUOUS FLOW FILTERLESS CENTRIFUGE Product Code:İ/B-014

Standards: .EN 12697-1,13108

Designed for quick filterless separation of filler from binder solution or

other

mixtures containing sediments (cement, soil, clay), in suspension. As no

filter is

required, there is no dispersion of material so that the highest accuracy is

assured. The solution is poured into the top funnel and falls into the

rotating

test container dia. 70x200 mm. Because of the centrifugal effect, the liquid

rises vertically leaving the filler and mineral particles inside the beaker. The

centrifuge is supplied complete with aluminium beaker, two sieves 0,149

mm.

and 0,074 mm. mesh respectively. The rotation speed is 11500 rpm, with

automatic ramp and preset speed control.

Extraction capacity is up to 100 g. of filler per test.

Power supply: 220-240 V 1ph 50 Hz 600 W

Dimensions: 350x600x720 mm.

Weight: 60 Kg

HOT EXTRACTOR SET SOLVENT RECOVERY STILL Product Code:İ/B-021 Standards: .ASTM D4944/AASHTO T127

Product Code:İ/B-016-10 Standards: .EN 12697-1,14,EN 13108 The unit is used to extract the binder from bituminous mixtures, and to determine the moisture content. Consisting of a

metallic pot complete with gauze

basket and filter, Dean Stark

collector, Liebig condenser, filter

paper 400mm dia. (pack of 25

pcs.)

Dimensions: 480x480x900 mm Weight : 22 kg aprox.

This efficient and compact unit, easy to install, is totally self contained. It is provided of two tanks: one for the clean solvent and one for the dirty solvent and of a water coolant system which only needs to be connected to a tap. A safety cut out is also supplied, being activated when the solvent level becomes too low or once the process is completed. Fully stainless steel made. Power supply: 220-240 V 1 ph 50-60 Hz 1300 W Dimensions: 320x400x650 mm Weight: 17 Kg


Page 28


KUMAGAWA EXTRACTOR Product Code:İ/B-061 Standards: .EN 12697-1,13108

Used to extract the bitumen from mixtures. Consisting of an electric heating device, balloon 1000 ml. capacity, glass pipes, cooling unit and 25 filtering cartridges. Power supply:

220-240 V 1 ph

50/60 Hz 750 W

REFLUX EXTRACTOR Product Code:İ/B-019 Standards: .ASTM D2172,AASHTO T164

This apparatus consists of a cylindrical glass jar containing a stainless steel wire basket cloth opening 0,074 mm. The asphalt sample (max. quantity 4000 g) is placed inside the wire basket, the solvent is poured inside the jar. Now the wire basket is inserted into the jar which is covered by the metal condenser connected to a water supply. The apparatus is placed on a hot plate and the boiling solvent drips into the basket dissolving out the bitumen. The filler passing through the mesh basket must be separated using the centrifuge extractor. Dimensions: dia. 160x335 mm Weight: 5 Kg

VACUUM PYCNOMETER Product Code:İ/B-067 Standards: .EN 12697-5,13108

Transparent plexiglass made, complete with valve and gauge, it is utilized for a rapid determination of asphalt content, bulk specific gravity of aggregates, the max. theoretic specific gravity of bituminous uncompacted road mixtures and the percent air voids in compacted mixtures. Dimensions: dia. 300x450 mm Weight: 10 Kg


Page 29


PAVEMENT CORE DRILLING MACHINE Product Code:İ/C-319 Standards: .

Diamond core drill bits are designed for making holes and to get cores from hard materials like concrete, reinforced concrete, rock, stones, bituminous. The diamond utilized for these bits is quality impregnated sinterized type. All bits are 500 mm. long. The coupling between the bit and the drilling machine requires a suitable expander coupling (see table). Two basic models of diamond bits are available: - to core concrete, rock, stones, hard materials - to core bituminous materials. The core extractor allows an easy removal of the core sample from the hole.

This rugged, compact and portable machine with vertical screw feed, is used for pavement core sampling where it is not easy to get electrical power.

Petrol engine 5 HP power, 4-cycle Briggs & Stratton model. Dimensions: 850x580x1230 mm Weight: 135 Kg



ASPHALT MIXER 5 LITRE CAPACITY Product Code:İ/B-025 Standards: . EN 1697,35

This bench mounting Mixer, is utilized for mixing samples of bituminous materials. Thanks to its double mixing action (shaft and planetary) it ensures uniform mixing. Double speed selection (140 or 285 rpm). The mixer is supplied complete with stainless steel bowl, but “without” beater or whisk to be ordered separately. Power supply: 220-240 V 1 ph 50 Hz 1800 W Dimensions: 450x400x480 mm Weight: 50 Kg

ASPHALT MIXER 10 LITRE CAPACITY Product Code:İ/B-026 Standards: . EN 1697,35

This large capacity mixer has been designed to mix bituminous samples for compaction tests and for other tests where uniformity is required. Thanks to the planetary action this mixer ensures a complete and uniform mixing. The machine is provided with a variable speed drive allowing to set different speeds. The plastic cover can be lifted to inspect the boxl, and in this case the motor automatically turns off to prevent accidents to CE safety Directive. The mixer is supplied complete with hook beater and stainless steel bowl, but without the insomantle electric heater that must be ordered separately. Power supply: 400 V 50 Hz 3 ph 0,5 HP (230V 1 ph on request) Dimensions: 260x760x860 mm - Weight: 160 Kg


Page 31


AUTOMATIC MARSHALL COMPACTOR Product Code:İ/B-033 Standards: . EN 12697-10,30

IMPACT MARSHALL COMPACTOR Product Code:İ/B-034 Standards: .

This ruggedly constructed apparatus automatically compacts the bituminous sample and stops off the motor after the preset number of blows has been completed on the automatic digital display counter. The trip mechanism is structured so that the sliding hammer falls at the same height at every blow. The mould is held in position by a fast clamping device. The compactor includes a vibrated concrete base where a laminate hardwood block is mounted.The machine is equipped with safety door, conforming to CE Safety Directive. When opened it stops automatically and cannot operate. All moving parts are quickly/easily accessible for maintenance. - Sliding mass weight: 4535 ± 15 g - Free fall height: 457 ± 5 mm - Blow frequency: 50 blows in 55/60 seconds Ø Power : 220-240 V 1 ph 50 Hz 750 W Ø Dimensions: 500 x 500 x 1890 mm Weight: 220 Kg

A steel anvil. Sturdy compaction pedestal

with base plate and cast steel anvil.

Attached to the pedestal is the chain operated drop weight lifting device, driven by an electric motor. The drop weight is lifted and released by a special system from two sides reducing friction during fall to a minimum and ensuring an almost constant compaction energy. A safety cover with viewing windows is provided around the chain and drop weight release device. The rigid mould spanner set fi xed on the anvil is equipped with a compaction rammer lifting device. The blow counter with electrical control is installed in a separate control box connected with a cable. A presetting counter stops the motor after reaching the preselected number of drops. Including compaction rammer. Moulds not included - see below 20-1550. Dim. appr. 600x600x2000 mm, Weight appr.210 kg. 220 V, 50 Hz



/ MARSHALL COMPRESSION MACHINE SEMI AUTOMATIC

Product Code:İ/B-042 Standards: . EN 12697-34,13108,ASTM D1559

Ruggedly constructed with frame to encompass the strain and loads, easy to use, it is designed to operate with the minimum of maintenance. Platen rate is 50.8 mm/minute also maintained under load thanks to an overpowered electric motor. The applied load is measured by a precision proving ring 30 kN capacity incorporating a stem brake holding the maximum reading and it is supplied with relevant calibration certificate. The machine includes: electric device for automatic stop when reaching the max capacity load of the proving ring, so as to prevent any overload damage, limit switches stopping the platen at max. and min. excursions. The unit is supplied complete with load ring 30 kN capacity, stability mould flow meter with dial gauge. Power supply: 220-240 V 1 ph 50 Hz 750 W Dimensions: 410x400x1110 mm Weight: 110 Kg

DIGITAL MARSHALL COMPRESSION MACHINE Product Code:İ/B-043 Standards: . EN 12697-34,13108,ASTM D1559

Ruggedly constructed with frame to encompass the strain and loads, easy to use, it is designed to operate with the minimum of maintenance. Platen rate is 50.8 mm/minute also maintained under load thanks to an overpowered electric motor. The applied load is measured by a precision load cell 50 kN capacity and max load is shown on the display. Safety devices limit cylinder stroke while controlling stability measuring instrument and mould.

stability mould flow digital with loadcell.

Max. vertical span: 645 mm

Horizontal span: 275 mm. Cylinder stroke: 60 mm. Power: 220-240 V 1 ph 50 Hz 750 W Weight: 155 Kg


Page 33


DIGITAL MARSHALL WATER BATH COOLING SYSTEM Product Code:İ/B-051 Standards: . EN 12697-34 ,ASTM D1559

DIGITAL MARSHALL WATER BATH Product Code:İ/B-052 Standards: . EN 12697-34 ,ASTM D1559

The internal tank and cover are stainless steel made, outside box is from painted steel sheet with wool insulation. The specimens are held by a stainless steel perforated shelf spaced from the bottom. The bath has a capacity of 46 litres and is designed to hold up to 20 Marshall specimens. Temperature range: from ambient to 95°C. Inside dimensions: 615 x 505 x 150 mm Overall dimensions: 660 x 540 x 230 mm Weight: 18 kg

The internal tank and cover are stainless steel made, outside box is from painted steel sheet with wool insulation. The specimens are held by a stainless steel perforated shelf spaced from the bottom. The bath has a capacity of 46 litres and is designed to hold up to 20 Marshall specimens. Temperature range: from ambient to 95°C. Inside dimensions: 615 x 505 x 150 mm Overall dimensions: 660 x 540 x 230 mm Weight: 18 kg

VIALIT BINDER ADHESION TEST Product Code:İ/B-053 Standards: . EN 12272-3

Used to evaluate the global adhesion and the active adhesion between bitumen and aggregates for road surfaces realization. The equipment is formed by: Six metal test plates Steel ball weighing 512 g Metallic base with three vertical support points and metallic rod 500 mm high Metallic hand operated roller, rubber lined with lead shots ballast. Weight: 40 kg approx.


Page 34


DIGITAL PENEROMETER Product Code:İ/B-056 Standards: . EN 1426,ASTM D5

Used to determine the consistency of a bituminous

sample under fixed conditions of load, time and

temperature. The penetration is expressed in

distance of tenths of millimeters vertically

penetrated by a standard needle. The standard

penetrometer is ruggedly con-structed, with a base

table in light alloy with levelling screws, plated

vertical rod, micrometric vertical adjustment device.

The slider is brass made with free fall. The digital

dialgauce, capacity 100 mm (division 0,01 mm.),The

penetrometer is supplied with stop and release push

button, automatic zero set, micrometer adjustment,

set of weights 50 and 100 g. penetration needle, two

sample cups dia. 55x35 mm and 70x45 mm.

Dimensions: 220x170x410 mm. Weight: 11 Kg

AUTOMATIC DIGITAL PENEROMETER Product Code:İ/B-059 Standards: . EN 1426,ASTM D5

Used for determination of the needle penetration according to EN

1426, ASTM D5 and AASHTO T49 standards.

A standard needle penetrates in the sample under

standardized conditions as required by the standards. The

penetration depth of the needle is determined with an

electronic measuring system, which is separated from the

plunger during the test. The free guidance of the plunger and

the influence of the load means friction is virtually eliminated,

creating a more accurate test. Before start of the test the measuring system is automatically

referenced, then the penetration needle moved up to the sample with

an electric drive, which is moved by finely adjustable joystick (a

magnifying glass and an ultra- bright LED lamp available). Then the

plunger is approved by an automatic device and blocked again after

the testing period.

The test result is displayed on the digital display. The plunger can

easily be removed to calibrate the weight. The penetrometer is

supplied complete with 6 needles, transfer dish and 3 x Ø55x35 mm

sample cup.


Page 35


DUCTLOMETER Product Code:İ/B-054 Standards: . EN 13589,13398,ASTM D113

Used to determine the bituminous ductility, that is to say, the distance to which a briquette of molten bitumen can be extended

under controlled condi-tions, before its breaking. The Ductilometer basically consists of a moving carriage travelling along guide

ways. The carriage is driven by an elec-trical motor, inside a large tank which is fitted with digital thermostat, immersion electric

heater, cooling coil for cold water circulation and pump unit. This model works in an automatic way at a speed of 50 mm/min. and

its max. stroke is 1500 mm. The tank made from stainless steel . Water bath tempera-ture is maintaned constant at 25°C ±

0,5°C. The ductilometer can accept up to 3 specimens simultaneously. Supplied complete except for the briquette mould and

base plate that must be ordered separately. Power supply: 220-240 V 1 ph 50 Hz 1000 W Dimensions: 2140x350x400 mm

Weight: 95 Kg

DUCTLOMETER COOLING SYSTEM Product Code:İ/B-055 Standards: . EN 13589,13398,ASTM D113

Used to determine the bituminous ductility, that is to say, the distance to which a briquette of molten bitumen can be extended

under controlled condi-tions, before its breaking. The Ductilometer basically consists of a moving carriage travelling along guide

ways. The carriage is driven by an elec-trical motor, inside a large tank which is fitted with digital thermostat, immersion electric

heater, COOLING SYSTEM for cold water circulation and pump unit. This model works in an automatic way at a speed of 50

mm/min. and its max. stroke is 1500 mm. The tank made from stainless steel . Water bath tempera-ture is maintaned constant at

25°C ± 0,5°C. The ductilometer can accept up to 3 specimens simultaneously. Supplied complete except for the briquette mould

and base plate that must be ordered separately. Power supply: 220-240 V 1 ph 50 Hz 1000 W Dimensions: 2140x350x400 mm

Weight: 95 Kg


Page 36


DUCTLOMETER FULL AUTOMATIC SYSTEM Product Code:İ/B-055/A Standards: . EN 13589,13398,ASTM D113,6084

This method is used for determining the ductility of bituminous materials by measuring the elongation before

breaking when two ends of briquette specimens are pulled apart at a specified speed and temperature. Conforming to the ASTM D113, D6084 and EN 13398standards, the test is performed in water at a temperature of

25±0.5°C (ASTM/AASHTO) or 25±0.2°C (EN) at a constant speed of 50 mm/min. The EN 13589 and 13703, also require the test to be performed from 5 to 30°C, at the testing speed adjustable up to

100 mm/min, and the determination of the tensile properties of modified bitumen. This High performancemodel, fitted

with the Load cells and the suitable Water chiller fully satisfy these requirements. İDİLLAB produce other models as the standard ductilometer conforming to ASTM D113, ASTM D6084, and EN

13398; and a Research version performing testing speed up to 200 mm/min and suitable for testing at temperatures

from 5 to 30°C.


Page 37


ROLLING THIN FILM Product Code:İ/B-066 Standards: . EN 12607-1

Utilized to measure the air and heat effect on a moving film of asphaltic semisolid materials. External frame and internal chamber are stainless steel made with insulated fiberglass intermediate chamber. Provided of large glass door for inspections. The oven must be connected to a suitable air pressure supply. Supplied complete with precision digital thermostat to maintain 163°C temperature, control thermometer ASTM 13C, ventilation device, set of eight glass containers dia. 64x140 mm. Power supply: 220-240 V 1 ph 50 Hz 1300 W Dimensions: 620x620x910 mm Weight: 55 Kg

ASPHAL OVEN WITH ROTATING SHELF Product Code:İ/B-064 Standards: . EN 12607-2,13303,ASTM D6,D1774

For.determining.the.softening.point. The.equipment.consists.of:

Double wall construction, inside and outside in stainless steel. Double wall door incorporating tempered crystal window. Electric heating with resistors located on the bottom of the oven. Protective double bottom. Digital setting and reading with thermostatic control between 50° and 180°C. Internal rotating plate (6 rpm) driven by gear reduction unit. Power supply: 220-240 V 1ph 50 Hz 600 W Internal dimensions: 330 x 330 x 330 (h) mm. External dimensions: 460 x 450 x 705 (h) mm. Weight: 30 Kg

RING AND BALL SOFTENING APPARATUS Product Code:İ/B-072 Standards: . EN 1427,ASTM D36,AASHTO T53

-.a.set.of.two.balls.dia..3/8”,.2.rings,.2.centering.collars. - two-gang framework to support rings, collars and balls and for thermometer insertion. - pyrex beaker diameter 85 x 130 mm for the immersion of the frame and samples Accessories PRODUCT CODE:İ/B-072-01Thermometer ASTM 15 C -2 to+80°C subd. 0,2°C PRODUCT CODE:İ/B-072-02Thermometer ASTM 16 C +30 to+200°C subd. 0,5°C


Page 38


AUTOMATIC RING AND BALL SOFTENING APPARATUS Product Code:İ/B-070 Standards: . EN 1427,ASTM D36,AASHTO T53

WILHELMI SOFTENING POINT APPARATUS Product Code:İ/B-071 Standards: . EN 1871

With glass ceramic heating plate and magnetic stirring motor with variable speed range below. Operation by use of a touch panel. The microprocessor controlled system provides a temperature rise of 5 K/min. as per standard with continuous temperature measurement inside the glass beaker. The ring and ball values are automatically registered by two photoelectric cells right and left with digital display of results and difference. Two test option 30 to 80° C for water and 80 to 150° C for glycerole are provided. Supplied with glass beaker 600 ml, stirring rod as well as a test frame with two rings, two balls and two ball centring supports. 230 V, 50 Hz, 1 kW.

Used for determining the softening point of bituminous materials for road construction, according to Wilhelmi method. The softening point is the temperature where a layer of thermoplastic material has a deformation given by a steel sphere weighting 13,9 g. The apparatus comprises a ring divided in two halves on a metal support frame, glass beaker, steel ball 15 mm dia.

Weight: 2 kg approx.

EMULSIFIED ASPHALT DISTILATION APPARATUS Product Code:İ/B-063 Standards: . EN 1431,ASTM D244

Used for the determination of cut-back asphaltic materials by the distillation test. The set is formed by: aluminium still container, glass connectors including condenser, stands, graduated cylinder, two thermometers ASTM 7C range -2 to +300°C, bunsen burner with gas stop valve. Weight: 12 Kg



DIGITAL SAYBOLT VISCOMETER Product Code:İ/B-087

Standards: . ASTM D88,AASHTO T72

Used to determine the viscosity of petroleum products at specified temperatures between 70 to 210 °F. Stainless steel made, the Saybolt viscometer is supplied complete with two interchangeable orifices “Furol” and “Universal”, oil bath, electric heater with digital thermoregulator, stirrer, cooling coil, viscosity flask. Thermometers are not included and must be ordered separately. Power supply: 220-240 V 1 ph 50 Hz 500 W Dimensions: 270x270x550 mm Weight: 12 kg

DIGITAL ENGLER VISCOMETER Product Code:İ/B-080 Standards: . ASTM D940,AASHTO T54

Conventional Engler Viscometer ASTM D1665 Brass test cup with stainless steel level-control of capillary flow outcropping Lid with Teflon tipped rod for closing the capillary hole Hand stirrer Bath with stainless steel heater regulated by table electronic regülatör Calibrated brass cup for oils with stainless steel orifice Teflon® tipped closing rod 18/8 stainless steel water bath Lid with stirrer motor Cooling coil Stainless steel heater Digital thermoregulator with over-temperature alarm and PT 100A probe Insulated double wall Front opened jacket


Page 40


KINEMATIC VISCOMETRE Product Code:İ/B-081 Standards: . ASTM D445 - ASTM D446 - ASTM D2170

The temperature, from room temperature to 135°C, remains constant within ± 0. 1°C. Electric stirrer, electric heater and cooling (COIL) system. Digital read-out and regulation of temperature. Safety device for temperature and water level with alarms. 19 litre bath in pyrex glass with external protection in plexiglass. Support base with housing seats. Capacity: five viscometers to be ordered separately according to viscosity.

Power supply: 220 V, 50 Hz, single phase, 1700 Watts Dimensions: 300 x 300 x 500 (h) mm. Weight: 12 kg.

DIGITAL

REDWOODVISCOMETRE

Product Code:İ/B-084

Standards: . EN 12846

Used to determine the viscosity of cut-

back bitumen and road oil. The

instrument consists of a stainless steel

bath (tank), agitator, rheostat,

immersion electric heater with digital

thermostat to take the water to the

desired temperature, cooling coil for

water supply connection. Supplied with

control glass thermometer IP 8C, range

0 - 45°C., subd. 0,2°C., graduated glass

cylinder 100ml capacity. Supplied

“without” Cup, Go/not go gauge, ball

valve to be ordered separately (see

accessories). Power supply: 230V

50/60Hz 1ph 300W Dimensions: 265 x

270 x 550 mm Weight: 12 kg



Distillation of Cut-back Asphaltic (Bituminous) Products Product Code:İ/B-090 Standards: . ASTM D402

CLEVELAND OPEN CUP FLASH POINT TESTER Product Code:İ/B-086 Standards: . ASTM D92,EN 22592,AASHTO T48

Electric Distillation of Cut-back Asphaltic Apparatus ASTM D402 Electric heater 500ml side arm distillation flask Chimney Ø 117 mm with insulated metal shield Insulated cover split in two halves Lamp screen Ø 100 mm Two sheets of 16 mesh gauze Cylinder lamp 100 ml Empty tube glass cooler Nozzle extensor made in glass Ball 500 ml Supported on a height adjustable platform

o determine the “open-cup”, flash and fire points of oil products with a fl ash point above 80°C. Calibrated cup. Gas or liquid gas lighting device above the cup. 550 W electric thermostatic heater. Power supply: 220-240 V 1ph 50 Hz 550 W Dimensions: 220 x 220 x 450 (h) mm. Weight: 11 Kg

PENSKY-MARTENS CLOSE CUP FLASH POINT TESTER Product Code:İ/B-086 Standards: . ASTM D93,EN 22719,AASHTO T73

Used for the determination of the flash point of petroleum products by the Closed Cup Test, with a Flash Point higher than 50°C. Supplied complete with stirrer, shield for radiations, cast iron bath, electric heater with thermoregulator two thermometers ASTM 9C -5 + 110°C div. 0,5 C, and ASTM 10C +90 +370°C div. 2°C. Power supply: 220-240 V 1 ph 50 Hz 600 W. Weight: 8 Kg



SURFACE IREGULARITY TRAVELLING BEAM DEVICE Product Code:İ/B-098 Standards: .

The 3 metre long Travelling Beam Device is used to check for any irregularities in both concrete and bituminous road surfaces. A sensing unit comprising a wheel connected to an indicator provides a magnification of 4:1. Deviation of the surface from a straight-line is shown on a scale calibrated in increments of 2 mm up to 10 mm and 5 mm up to 25 mm. A dye-marker is fitted which may be used to identify suspect areas. Outrigger wheels provide mobility on site. The device is supplied as three sub-assemblies which are quickly assembled on site. The Travelling Beam is supplied fitted with an autographic recorder providing a permanent record of the surface profile. Records up to 1 kilometre can be recorded on the special chart paper rolls used.

ELECTRONIC SURFAVE IREGULARITY TRAVELLING BEAM DEVICE Product Code:İ/B-098/10 Standards: .

The 3 metre long Travelling Beam Device is used to check for any irregularities in both concrete and bituminous road surfaces. A sensing unit comprising a wheel connected to an indicator provides a magnification of 4:1. Deviation of the surface from a straight-line is shown on a scale calibrated in increments of 2 mm up to 10 mm and 5 mm up to 25 mm. A dye-marker is fitted which may be used to identify suspect areas. Outrigger wheels provide mobility on site. The device is supplied as three sub-assemblies which are quickly assembled on site. The Travelling Beam is supplied fitted with an autographic recorder providing a permanent record of the surface profile. Records up to 1 kilometre can be recorded on the special chart paper rolls used.


Page 43


MOT STRAIGHT EDGE Product Code:İ/B-099 Standards: . EN 13036-7

Manufactured from alluminium alloy, it is utilized to measure irre-gularities on road pavement, floors, concrete pavement. Lenght is 3 metres, and it is supplied complete with two graduated measuring wedges. Weight: 10 Kg

PLATE BEARING EQUIPMENT 100 KN Product Code:İ/B-103 Standards: .

Utilized with the Benkelman Beam B100 or B102, to measure the static deflection in the centre of the plate from an indipendent point of the local load deflections: EV1/EV2 (roads) and Westergard (platforms) The equipment consists of: - Bearing plate dia. 300 mm with central measuring device - 100 kN capacity hydraulic ram complete with hand pump - Manometer range 0-100 kN - Extension rods, spherical

bearing, couplings, hoses,

accessories

- Portable wooden carring case - Weight: 72 Kg

BENKELMAN BEAM APPARATUS Product Code:İ/B-100 Standards: . AASHTO T256,77

Alluminium alloy made, complete with dial indicator and accessories, it is utilized to measure the deflection of the road surface when loaded by the wheels of vehicles. The beam is put in contact with the pavement under test between the tires of the vehicle. The measurement of the deflection is performed when the vehicle passes over the test area. Lenght of the Benkelman beam is 250 cm. Beam fulcrum ratio 4:1 Supplied complete with wooden carrying case. Weight: 15 Kg



The accurate and satisfactory test of fresh and hardened concrete are essential elements for any type of building realization. The final quality of the concrete utilized in the structure depends from many variables like: workability, consistency, setting, time, volumic mass, air content, compressive strength, temperature, linear variations, corrosion etc. İDİLLAB proposes a complete range of testing and research equipment on concrete to satisfy practically all the above quality variables, in compliance with the EN, ASTM and the most known International Standards.


Page 45


ANALYTICAL PRODUCT INDEX CONCRETE


İ/C-021 COMPR. MACHINE HAND OPERATED 1300 KN ASTM C39,AASHTO T22 47 İ/C-061 COMPR. TESTING MACHINE 2000KN SEMI AUTO ASTM C39,AASHTO T22 47 İ/C-066 COMPR. TESTING MACHINE 3000KN SEMI AUTO ASTM C39,AASHTO T22 47 İ/C-060 COMPR. TESTING MACHINE 2000KN AUTOMATIC EN 12390-4,ASTM C39,AASHTO T22 48 İ/C-065 COMPR. TESTING MACHINE 3000KN AUTOMATIC EN 12390-4,ASTM C39,AASHTO T22 48 İ/C-070 COMPR/FLEXURAL TESTING MACHINE 2000/100KN EN 12390-4,ASTM C39,AASHTO T22 49 İ/C-090 FLEXURAL TESTING MACHINE 200 KN SEMI AUTO EN 12390-5,1340:4,ASTMC78,C293 50 İ/C-091 FLEXURAL TESTING MACHINE 200 KN AUTOMATIC EN 12390-5,1340:4,ASTMC78,C293 50 İ/C-100 CYLINDER TENSILE TEST APPARATUS EN 12390-6,ASTM C496 51 İ/C103 SPLITTING TENSILE TEST APPARATUS EN 1338,12390-6 51 İ/C-162 PANT TYPE MIXER 56 LITRE 51 İ/C-163 ROLLING TYPE MIXER 90 LITRE SEMI AUTO 52 İ/C-164 DRUM TYPE MIXER 53

İ/C SAMPLE MOULDS CUBE AND CYLINDERS 53 İ/C-302 CURING TANK 54 İ/C-129 BOHME ABRASION TESTER EN 1338,1339,1340,13892-3,14157 54 İ/C-130 ABRASION TESTER FOR CONCRERE EN 1338,1339,1340,13892-3,14157 55 İ/C-171 V FUNNEL 55 İ/C-172 L BOX 55 İ/C-173 U BOX 56 İ/C-174 J RING EN 12350-12 56 İ/C-175 FILL BOX 56 İ/C-178 SLUMP CONE SET EN 12350-2,ASTM C143,AASHTO T119 57 İ/C-183 VEBE CONSISTOMETER EN 12350-3 57 İ/C-185 COMPACTION FACTOR APPARATUS BS 1881:103,5075 57 İ/C-192 FLOW TABLE EN 12350-5 57 İ/C-186 KELLY BALL APPARATUS ASTM C360 58 İ/C-213 COCRETE PENETROMETER ASTM C403,AASHTO T197 58 İ/C-198 AIR ENTRAINMENT METER 8 LIRES EN 12350-7 58

İ/C-200-205 UNIT WEIGHT MEASURES EN 1097-3,ASTM C29,C138,AASHTO T19 59 İ/C-270 POKER VIBRATOR EN 12390-2,ASTM C31,C192,AASHTO T23 59 İ/C-278 VIBRATING TABLE EN 12390-2 59 İ/C-314 CLIMATIC TEST CABINETS EN 196-1,1367-1 60 İ/C-300 SPECIMEN GRINDING MACHINE EN 12390,3 61 İ/C-301 SPECIMEN GRINDING MACHINE SMALL SIZE 61 İ/C-350 SPECIMEN CUTTING MACHINE 62 İ/C-322 UNIVERSAL CORE DRILLING MACHINE 62 İ/C-319 PAVEMENT CORE DRILLING MACHINE PETROL ENG. 63 İ/C-098 PULLOUT TEST APPARATUS 63 İ/C-099 PULL OFF TESTER DIGITAL 0-5 KN CAPACITY 64 İ/C-380 CONCRETE TEST HAMMER EN 12504:2,ASTM C805 65 İ/C-390 ANVIL EN 12504:2 65 İ/C-386 DIGITAL CONCRETE TEST HAMMER EN 12504:2,ASTM C805 65 İ/C-425 WATER IMPERMEABILITY TESTER EN 12390-8,DIN 4048 66


Page 46


COMPRESSION TESTING MACHINE 2000 KN SEMI AUTO Product Code:İ/C-061 Standards: . ASTM C39,AASHTO T22

Speed Control: Manuel with handle

Load Measure : 400 Bar Pressure Transducer

Oil Flow Control : Manuel with handle

Max vertical daylight : 310 mm

Compression planets dia: 300 mm

Compress. Plate Hardened : 60 HRC

Max ram travel : 50 mm

Power : 220-240 V 1 ph 50 Hz

Dimension: 600 x 1000 x 1185 mm

Weight : 1200 kg

COMPRESSION TESTING MACHINE 3000 KN SEMI AUTO Product Code:İ/C-066 Standards: . ASTM C39,AASHTO T22

Speed Control: Manuel with handle

Load Measure : 400 Bar Pressure Transducer

Oil Flow Control : Manuel with handle

Max vertical daylight : 310 mm

Compression planets dia: 300 mm

Compress. Plate Hardened : 60 HRC

Max ram travel : 50 mm

Power : 220-240 V 1 ph 50 Hz


Weight : 1500 kg


Page 47


COMPRESSION TESTING MACHINE 2000 KN FULL AUTO Product Code:İ/C-060 Standards: . EN 12390-4,ASTM C39,AASHTO T22

Control unıt:Digital screen or computer full automatic. Speed rate control:Motor speed control unit Load masure:450 bar pressure transdiser. Oil flow control:24 vold selonoid valve. Compression planets diameter 300mm. Max ram travel:50 mm. Power:220V-50Hz-1.1kw. Dimensions:500x1000x1185mm Weight:700 kg

COMPRESSION TESTING MACHINE 3000 KN FULL AUTO Product Code:İ/C-065 Standards: . EN 12390-4,ASTM C39,AASHTO T22

Control Unit : Dijital and/or Computer, Full Automatic Speed Rate Control: Motor Speed Control Unit Load Measure : 400 Bar Pressure Transducer Oil Flow Control : 24 V Selenoid Valve Max vertical daylight : 310 mm Compression planets dia: 300 mm Compress. Plate Hardened : 60 HRC Max ram travel : 50 mm Power : 220-240 V 1 ph 50 Hz

Dimension: 600 x 1050 x 1650

mm Weight:1500 kg


Page 48


COMPRESSION AND FLEXURAL TESTING MACHINE 2000/100 KN FULL AUTO Product Code:İ/C-070 Standards: . EN 12390-4,ASTM C39,AASHTO T22

Flexural .Testing Frame 100 kN

Standards: TS EN 12390/5, BS 1881:118, ASTM C78, DIN 51302, GOST 10180 Product No: IL-B065/01 Max vertical daylight : 180 mm Distance between upper rollers:

200 mm

Distance between lower rollers:

450 mm Rollers dia: 40 mm Rollers Hardened : 40 HRC

Control Unit : Dijital and/or

Computer, Full Automatic Speed Rate Control: Motor Speed

Control Unit Load Measure Compression:450 Bar

Press.Trans. Load Measure Flexure: 250 Bar

PressureTransducer Oil Flow Control : 24 V Selenoid

Valve Power : 220-240 V 1 ph 50 Hz


Weight : 2000 kg

Compression Test Frame 2000kN Standards : TS EN 12390-4, BS 1881, ASTM C78, DIN 51302, GOST 10180 Product No: İ/C-070 Max vertical daylight : 310 mm Compression planets dia: 300 mm Compress. Plate Hardened : 60 HRC Max ram travel : 50 mm



FLEXURAL TESTING MACHINE 200 KN SEMI AUTO Product Code:İ/C-090 Standards: . EN 12390-5,1340:4,ASTM C78,C293

Control Unit : Dijital and/or Computer, Semi Automatic Speed Control: Manuel with handle Load Measure Flexure: 200 Bar PressureTransducer Oil Flow Control : Manuel with handle Max vertical daylight : 160 mm Distance between upper rollers: 400 mm Distance between lower rollers: 1000 mm Rollers dia: 20 mm Rollers Hardened : 40 HRC Power : 220-240 V 1 ph 50 Hz Dimension: 1000 x 1000 x 1185 mm Weight:300 kg

FLEXURAL TESTING MACHINE 200 KN AUTOMATIC Product Code:İ/C-091 Standards: . EN 12390-5,1340:4,ASTM C78,C293

Control Unit : Dijital and Computer, Automatic Speed Control: Load Measure Flexure: 200 Bar PressureTransducer Oil Flow Control : Manuel with handle Max vertical daylight : 160 mm Distance between upper rollers: 400 mm Distance between lower rollers: 1000 mm Rollers dia: 20 mm Rollers Hardened : 40 HRC Power : 220-240 V 1 ph 50 Hz Dimension: 500 x 1100 x 1200 mm Weight:4500 kg


Page 50


CYLINDER TENSILE TEST APPARATUS

SIPLITTING TENSILE TEST

APPARATUS

Product Code:İ/C-100

Product Code:İ/C-103

Standards: . EN 12390-6,ASTM C496 Standards: . EN 1338,12390-6

For the Splitting and indirect tensile testing (“Brazilian” test) of concrete cylinders with diameters 100, 150 to 160 mm Max.test load: 500 kN

Max test chamber height 100 mm Min test chamber height 100 mm

PAN TYPE MIXER 56 LITRE CAPACITY Product Code:İ/C-162 Standards: .

Maximum test load 500 KN Upper edge is movable Max test chamber height 160 mm Min test chamber height 120 mm Test chamber widht 200 mm Hard fibres strip 4X10X350

It can be moved by rubber wheel The Mixing pan is removable and tils"135 °" for mixing operation. Gearbox is designed as parellel to floor, in this way the motor is protected from load. Power: 220-240 V AC, 50 Hz 3 KW Weight : 120 kg



AUTOMATIC CONCRETE MIXER 75 LITRE CAPACITY Product Code:İ/C-163 Standards: .

For production of quality concrete of all quality classes, special concrete, light-weight concrete as well as other mixable bulk goods. Applicable for chemical and process-technology industries. Two-zone counter-flow mixing system. Mixer lining and mixer spirals of highly wear-resistant steel cast. Exchangeable mixing goods. Supporting legs of canted steel sheet with industrial rollers. Electric motor drive via slip-on gear mechanism 3,0 kW. Infinitely adjustable mixing rotation through frequency control. Material feeding via inlet funnel from top. Observation of mixing process via grate protected opening in mixer body. Mechanical dust guard cover. Discharge of material via manual slewing of mixer trough. This allows a 100 % discharge of the mixer.


Page 52


DRUM TYPE MIXER Product Code:İ/C-164 Standards: .

Description: The mixer is used for efficient mixing of concrete, plaster and mosaic, and with a capacity of 125 lt. this lightweight mixer is equipped with rubber wheels which provide high portability. Available in two models, electrical and diesel. 230 V, 50–60 Hz, 1 ph

Overall Dimensions: 800 x 1400 x 1300mm Capacity: 135 litres Mixing Capacity: 125 litres Power: 3700 W, 3.5 Hp Weight (approx.): 90 kg

SAMPLE MOULDS CUBE ,BEAM AND CYLINDER Product Code: Standards: .

CYLINDIR MOULDS Models Dimensions Weight IL-C258 100x200 mm 8 IL-C258-01 112,8x220 mm 8 IL-C258-02 150x300 mm 15

IL-C258-03 6” x 12” 15 IL-C258-04 160x320 mm 17

IL-C258-05 250x500 mm 80 IL-C258-06 150x150 mm 10



CURING TANK Product Code::İ/C-302 Standards: .

Control Unit : Dijital thermostat heating system. Made from extremely robust and stable polyethylene, complete with galvanized base rack. Submersible water circulating pump, also used for an easy water discharge from the tank Power supply: 220-240 V 1 ph 50 Hz In Dimension: 800 x 1500 x 800 mm Weight: 50 Kg

BOHME ABRASION TESTER Product Code::İ/C-129

Standards: . EN 1338,1339,1340,13892-3,14157

The instrument measures a volume loss in a specimen under abrasion test and

it’s used in tests such as: - paving stones - concrete slabs - slabs made of natural rocks - natural stone slabs The test is performed by positioning a specimen to be verified in a abrasion tester

Böhme apparatus on the test track on which has been spread normalized abrasive;

the grinding wheel it’s made rotate and the specimen submitted to the abrasive load

of 294 N for a certain number of cycles. Before doing a test, establish the specimen’s bulk density by measuring weight and thickness. Perform the test for 16 cycles composed of 22 turn each, calculating at the end a worn as a average loss in volume and weight.

The apparatus is basically composed of: - cast iron horizontal disc with a speed of 30 rpm and a

diameter of 750mm furnished of a 200mm test track to

position a specimen. - Control panel with digital revolutions counter with automatic stop after preset

revolutions - Specimen’s holder

Power supply: 230V 50Hz 1PH 800 W Dimension: 1500 x 1000 xh 850 mm Weight: 250 Kg


V FUNNEL Product Code::İ/C-

171 Standards: .


ABRASION TESTER FOR CONCRETE Product Code::İ/C-130 Standards: . EN 1338,1339,1340,13892-3,14157

Used to determine the resistance to deep abrasion of natural stones and concrete products. Abrasion resistance is determined by measuring the length of the groove produced in the surface of the specimen by a disc rotating at constant speed and pressure. Disc speed is controlled electronically with automatic stop after the set number of revolutions has been reached. Supplied with:

5 kg of white corundum Disc: 70 mm thick Max. sample dimensions: 100 x 100 x 60 mm Power supply: 230V 50Hz 1PH 800 W Dimensions: 530 x 480 x 830 mm Weight: 70 Kg

L BOX Product Code::İ/C-

172

Standards: .

V-FUNNEL, “stainless L-BOX, “stainless steel” made,

steel” made, having 10 consisting of:

litres capacity, stand container with inside rigid

mounted surfaces

Rectangula

r

bar

, 900 -obstacle formed by 3 vertical

mm long bars

Box, polythene made having 16 mm dia.with free

light of 38 mm

gate in guillotine form



J RING

U

BOX

Product Code::İ/C-174

Product Code::İ/C-

173

Standards: . EN 12350-12 Standards: .

J-RING, galvanized steel, rectangular section 30 x 25 mm and median diameter of 300 mm, rings bars dia. 10 x 100 mm, The bars have distance of 48 mm CONE MOULD, galvanized steel Square base plate, galvanized steel, Dimensions 800 x 800 mm

FILL BOX Product Code::İ/C-175

Standards: . EN 12350-12

U-BOX, “stainless steel” made, with inside smooth walls, foreseen of a flow obstacle, formed by vertical reinforcement bars. The bar’s diameter and their distance can be modified as requested by Standards. A gate in guillotine form splits the vertical portion of the box from the horizontal one. Dimensions: 280 x 200 x 680 mm Weight : 20 kg approx.

This test is also known as ‘Kajima test’. The test is used to measure the filling ability of self compacting concrete with a maximum aggregate size of 20 mm. the

apparatus consists of a container (transparent) with a flat and smooth

surface. In the container are 35 obstacles are made of PVC with a diameter

of 20mm and a distance centre to centre of 50mm, see figure. At the top

side is a put filling pipe (diameter 100mm height 500mm) with a funnel

(height 100mm). The container is filled with concrete through this filling pipe

and difference in height between two sides of the container is a measure for

the filling ability.



VEBE CONSISTOMETER

SLUMP CONE

TEST

Product Code::İ/C-183 Product Code::İ/C-178

Standards: . EN 12350-2,ASTM C143,AASHTO T119 Standards: . EN 12350-3

Slump cone, Vibration time can be adjustable

galvanized steel Complete set including :

Tamping rod, Vibration table

galvanized dia Cylindirical Container

16x600 Slump cone, galvanized steel

Cone funnel, Graduated rod

galvinized steel Cone funnel, Fiber Base plate

Base

plate

Power supply 220 V, 50 Hz, 1

ph

Steel rule 300mm Dimensions: 400 x 250 x 690 mm.

long Weight: 80 kg.

COMPACTION FACTOR APPARATUS

FLOW TABLE


Product Code::İ/C-

192 Standards: . BS 1881:103,5075 Standards: . EN

12350-5 Designed to undertake a more precise and sensitive test procedure than the simple slump test. The apparatus consists of two conical hoppers mounted on a cylinder. Galvinezed double steel sheet flow table with top plate The compacting factor is the ratio between the weight of the partially compacted concrete and the weight of the fully compacted concrete. Supplied complete with tamping rod dia. mm 16x600 long. Dimensions: mm 500x400x1510. Weight: 55 Kg

Galvanized steel conical mould dia.130x130 h 200 mm Galvinezed double steel sheet flow table with top plate Tamper 40x40 h:200 The top table has a square surface of 700x700 mm Weight : 30 kg



CONCRETE

PENETROMETER KELY BALL

APPARATUS

Product Code::İ/C-213 Product Code::İ/C-192

Standards: . ASTM C403,AASHTO T197

Standards: . ASTM C360 Consisting of a

hemispherically ended

cylinder with guiding frame

and a handle graduated in

inch, it is used to determine

the workability of fresh

concrete. The ball is lowered

into the concrete and the

penetration measured. It can be used on site or in laboratory. Cadmium plated for rust protection. Weight: 15 Kg

AIR ENTRAINMENT METER Product Code::İ/C-198

Standards: EN 12350-7

Used to determine the setting time of the mortar fraction in concrete mixes with slump greater than zero, by testing mortar sieved from mix. The apparatus consists of a spring penetrometer (capacity 100 Kgf, precision 1 Kgf) and six interchangeable stainless steel needle pointers of 16-32-65-160-325-650 mm2 area. A sliding ring indicates the reached load on the handle of the penetrometer. Supplied complete with carrying case. Dimensions: 450x160x70 mm. Weight: 5 Kg

It consists of an aluminium cylindrical vessel with airtight cover assembly incorporating an air pump, a precision pressure gauge 90 mm dia. and valves. Capacity: 7 litres. Air content range: 0 - 100% Gauge graduations: 0,1% up to 6% of the scale; 0,2% from 6% to 10% of the scale. Lightweight, compact and durable, this meter allows quick clamping system and testing with few pump strokes. It is not affected by change in atmospheric pressures. The container can be used also for unit weight measures of fresh concrete and aggregates. Supplied complete with calibration kit, accessories, robust plastic carrying case. Dimensions: dia. 250 by 500 mm approx. Weight: 10 kg



UNIT WEIGHT MEASURES Product Code:: Standards: EN 1097-3,ASTM C29,C138,AASHTO T19

POKER VIBRATOR Product Code::İ/C-270

Standards: EN 12390-2,ASTM C31,C192

VIBRATING TABLE Product Code::İ/C-278 Standards: EN 12390-2,

POKER VIBRATOR, HEAVY DUTY, portable,

electric. Tip dimensions: dia. 25 by 290 mm

long. Flexible shaft 2 metres long.

Frequency: 12000 vibr./minute. Amplitude:

0,65 mm Centrifugal force: 0,8 kN (80 kg)

Power supply: 230V 1ph 50/60Hz 2300W

Dimensions: 200 x 300 x 350 mm approx.

Weight : 10 kg approx.

Capacity. Up to 136 kg Deck. Cushioned steel; 600 x 400 mm Vibrator. High-speed 3,000 rpm Control Panel. ; includes

operating switch, fuse, rectifying element and digital timer and digital speed control Amplitude. 1.58 mm linear vibration. Weight: 60 kg



CLIMATIC TEST CABINETS Product Code::İ/C-314

Standards: EN 196-1,1367-1

Environmental Testing under your control.. MIT Test Cabins are developed to simulate real enviromental conditions by controlling temperature, humidity and day & night lighting cycles. By means of their wide temperature and humidity control range various kinds of tests could be performed in different areas. Stability, artificial aging and storage test can be easily done as well. The excellent design of MIT Series test cabinets allows them to be used for different purposes in different sectors such as;

Electronic Industry, Automobile Supply Industry, Aircraft and Aviation Industy, Chemical Industry, Plactic Industry, Textile Industry, Pharmaceutical Industry, Construction Materials Industry, Food Industry, Military Equipment and Armament Industry, Packaging Industry,

To ensure maximum durability and reliability, adequate materials were chosen fort he construction of the products. The chamber is made of Stainless Steel. The outer body is made of Epoxy coated Galvanic Steel to resist high humidity levels. The lights are located inside the door and protected with a glass window. There is an also internal glass door which allows controlling the samples without disturbing the temperature and humidity conditions inside the chambers. The insulation becomes more important for the efficiency of the product when cold and hot temperatures are concerned. It is made of high density injected polyurethane. The humidity is produced by the humidity generator and measured by a humidity sensor. The recovery time is fast and humidity measurement is sensitive. The heating function is controlled by PID while cooling and humidity are controlled by proportional system. User friendly control panel includes 128x64 pixel display.

Powerful air circulation system maintains temperature and humidity uniformity and stability even at low temperatures. Directional airflow assures quick recovery after door openings. The state-of-art control system is based on programmable microprocessor technology. Program name: There are ten programs memories, Temperature: - 20 ̊C/ +60 ̊C, Humidity Range : %20-%95 Rh, Time: 0-999 hours – 59 minutes +hold position, No of Step: 1-9, No of program repetition: 1-99,

The Test Cabinets are enviromentally friendly with CFR-Free insulation and refrigerant


Page 60


SPECIMEN GRINDING MACHINE Product Code::İ/C-300


Used to grind and polish concrete specimens, natural stones, ceramic materials, etc. The cube and cylinder specimens can be easily locked on the table and the grinding head 330 mm dia. can be radially moved either manually or automatically in both directions so the only manual operation requested is the lowering of the grinding head by the top hand wheel. The machine is supplied complete with safety chip guard – that when removed stops automatically the machine –, coolant tank, motor pump and one set of abrasive sectors. Diamond grinding sectors are available on request. The machine is supplied complete with clamping element for 100, 150 and 200 mm cubes. Clamping devices for cylinders and device for dry grinding procedure are also available on request. (See accessories) Dimensions:1300x1400x1750 mm Weight:750 kg

SPECIMEN GRINDING MACHINE SMALL SIZE Product Code::İ/C-301


Used to grind and polish concrete specimens, natural stones, ceramic materials, etc. The cube and cylinder specimens can be easily locked on the table and

the grinding head 140 mm dia. can be radially moved either manually or

automatically in both directions so the only manual operation requested is

the lowering of the grinding head by the top hand wheel. The machine is

supplied complete with safety chip guard – that when removed stops

automatically the machine –, coolant tank, motor pump and one set of

abrasive sectors. Diamond grinding sectors are available on request. The

machine is supplied complete with clamping element for 40-50 and 75 mm

cubes. Clamping devices for cylinders 100mm and device for dry grinding

procedure are also available on request. (See accessories)


Page 61


SPECIMEN CUTTING MACHINE Product Code::İ/C-350

Standards:

The machine accepts blades up to

dia. 350 mm

Useful cutting height: 110 mm

Dimensions of the sliding table:

500x450 mm

Power : 220-240 V 1 ph 50 Hz,3 HP

Dimensions: 700x1100x 680 mm

Weight : 80 kg

The blade can be oriented for cuts at

45°

UNIVERSAL CORE DRILLING

MACHINE

SIMPLE MODEL CORE DRILLING

MACHINE


Product Code::İ/C-323 Standards:

Standards:

Coring angle :90°

Elektric motor at two speeds: 460,

900

rpm.

All working and moving parts are

phosphate for rust protection.

The drilling excursion is 550 mm and

the machine can drill cores up to 255

mm dia.

The slinding group is rectified so as

to

assure a very soft and accurete drilling

movement.

Power: 220-240 V 1ph 50 Hz 2600 W

Weight: 30 kg

Coring angle :360° Elektric motor at three speeds: 670, 1140, 1590 rpm. All working and moving parts are cadmium plated for rust protection. The drilling excursion is 550 mm and the machine can drill cores up to 200 mm dia. The slinding group is rectified so as to assure a very soft and accurete drilling movement. Power: 220-240 V 1ph 50 Hz 2400 W Weight: 85 kg


Page 62


PAVEMENT CORE DRILLING MACHINE Product Code::İ/C-319

Standards:

This rugged, compact and portable machine with vertical screw feed, is used for pavement core sampling where it is not easy to get electrical power. Petrol engine 5 HP power, 4-cycle Briggs & Stratton model. Dimensions: 850x580x1230 mm Weight: 135 Kg

PULL OUT TEST APPARATUS Product Code::İ/C-098

Standards:

The objective of the test method is to measure the working and ultimate capacities of rock bolt anchors. The system comprises of a central hole jack, hand pump with a load gauge, directional control value (only for central hole jacks above the capacity of 500 kn), flexible hose pipe 5 mts,

truss high tensile bolts with coupling. In general the pull

out force is indicated on the load gauge, however a load

cell with digital indicator can be used to measure the pull

out load. Arrangement is provided for fixing the dial

gauge for estimating deflection against the load.


Page 63


PULL OFF TESTER DIGITAL 5-6-16 KN Product Code::İ/C-099,İ/C-100 Standards: EN 1452,EN 12399,EN 12618-2,EN 13279-2,BS 1881-207,EN 13678-1

LOADCELL MODEL İ/ C-099 MANOMETER MODEL İ/C-100

This dynamometer measures the adhesive force and the tensile

strength of two layers of materials (concrete, facing plasters, mortars,

building plasters, lime etc.) and is particularly suitable for applications

concerning testing repairs of any structure where the bond strength between two layers is an essential

factor. Compact, light, for use in any

location, this Pull-Off Tester is fitted

with a load cell and high resolution

large digital display unit; it is

therefore suitable for measurements

from low loads up to 5 kN, granting

a wide working range and ideal for a

large number of applications and

materials. The direct tensile force is

applied by rotating the hand wheel.

Specifications: - Load capacity: 5-6-16 kN

- Resolution: 10 N - Working range: 0,25 to 16 kN

- Accuracy and repeatability: better than +/- 1% - Complete with traceable calibration certificate

- Battery operated - Hand wheel rounds: 60 with

mechanical round/counte

r - Seat ball assuring axial/central load application

Supplied complete with carrying case, but

“WITHOUT” accessories to perform the test,

which have to be ordered separately.

To perform the test a common electric drill is required.

Dimensions: 410 x 210 xh 270 mm Weight : 3,5 kg approx.



CONCRETE TEST HAMMER MECHANIC

CONCRETE TEST HAMMER

DIGITAL


Product Code::İ/C-386 Standards: EN 12504:2,ASTM C805

Standards: EN 12504:2,ASTM C805

Ölçüm Aralığı : 10-70 N/mm2 Çarpma Enerjisi : 2.207 Joule (0,225 mkgf Çarpma değeri çekiç üstüden direk okunur Alimünyum gövde Taşıma kabı, aşındırma taşı ve kalibrasyon eğrisi Ağırlık :1.2 kg

Ölçüm Aralığı : 10-70 N/mm2 Çarpma Enerjisi : 2.207 Joule (0,225 mkgf Çarpma değeri çekiç üstüden direk okunur Alimünyum gövde Taşıma kabı, aşındırma taşı ve kalibrasyon eğrisi Ağırlık :1.2 kg

ANVIL Product Code::İ/C-386 Standards: EN 12504:2

Made of special steel with guide for routine checks on concrete test hammers.

Dimensions: 215 x 215 x 270 (h) mm.

Weight: 17 kg.



WATER IMPERMEABILITY TESTER 6 UNIT Product Code::İ/C-425 Standards: EN 12390-8,DIN 4048

Apparatus at 6 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure The unit accepts up to 3 or 6 concrete cubic, cylindrical or prismatic specimens having max. dimensions of 200x200x200 mm The specimen is put into the test chamber, clamped with suitable flanges and gaskets, and then a known water pressure is applied on the specimen’s surface for a time as requested by Standard, by using a suitable air compressor (accessory) having at least 5 bar pressure capacity The water penetrated is measured by breaking the specimen, or by reading the water permeated through the graduated burette fixed on the front panel Dimension : 1290 x 450 x1280 mm Weight :120 kg

WATER IMPERMEABILITY TESTER 3 UNIT Product Code::İ/C-426 Standards: EN 12390-8,DIN 4048

Apparatus at 3 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure The unit accepts up to 3 or 6 concrete cubic, cylindrical or prismatic specimens having max. dimensions of 200x200x200 mm The specimen is put into the test chamber, clamped with suitable flanges and gaskets, and then a known water pressure is applied on the specimen’s surface for a time as requested by Standard, by using a suitable air compressor (accessory) having at least 5 bar pressure capacity The water penetrated is measured by breaking the specimen, or by reading the water permeated through the graduated burette fixed on the front panel Dimension : 1290 x 450 x1280 mm Weight :120 kg


Page 66


The raw materials like: limestone, chalk, shale, clay etc., mixed with water, are crushed, ground and blended. They are now submitted to a chemical process in a rotary kiln until they combine into clinker. From the clinker opportunely mixed with gypsum, the cement factories obtain the modern Portland cement, that may be modified in more and more sophisticated binders like expansive mortars, pre-mixed cements etc. In section “Cement & Mortars” İDİLLAB proposes a complete range of equipment for: Fineness, Consistency, Setting-time, Workability, Soundness, Flow, Fly Ash, Chemical

Tests etc.; and for Mixing, Moulding, Curing and Strength Tests, to satisfy all the above

quality variables, in compliance with the EN, ASTM and the most known International

Standards.


Page 67


ANALYTICAL PRODUCT INDEX CEMENT/MORTAR


İ/D-009 BLAIN AIR PERMEABILTY APPARATUS EN 196-6,ASTM C204,AASHTO T153 69 İ/D011 DIGITAL BLAIN AIR PERMEABILITY TESTER EN 196-6,ASTM C204,AASHTO T153 69 İ/D-016 WATER FLOWING SIEVES DEVICE D.M.3/6/68 69 İ/D-017 FINENESS OF FLY ASH BY WET SIEVING EN 451-2,ASTM D430 69 İ/D-021 PACKAGED CEMENT TUBE SAMPLER EN 196-7,ASTM C183,AASHTO T127 70 İ/D-027 AIR CONTENT METER 1 LITRE CAPACITY EN 413-2,EN 459-2 70 İ/D-091 BULK DENSITY OF LIME EN 459-2 70 İ/D-038 FLOW CONE APPARATUS EN 445 70 İ/D-055 VICAT APPARATUS EN 196-3,480-2,AASHTO T131 71 İ/D-044 AUTOMATIC VICAT EN 196-3,480-2,ASTM C187,C191 71 İ/D-061 CALORIMETER EN 196-8,ASTM C186 72 İ/D-070 AUTOCLAVE ASTM C151,C141 72

İ/D- CEMENT PRIZM MOULDS 72 İ/D-077 LENGHT COMPARATOR EN 12617-4,1367-4,ASTM C151,C490 73 İ/D-064 LE CHATELIER WATER BATH EN 196-3 73 İ/D-083 PLUNGER PENETRATION APPARATUS EN 413-2,459-2,1015-4 74 İ/D-084 LEVER SUPPORT EN 1015-9,13294 74 İ/D-090 FLOW TABLE MANUEL EN 459-2,1015-3,ASTM C230 74 İ/D-091 FLOW TABLE MOTORIZE SYSTEM EN 459-2,1015-3,ASTM C230 74 İ/D-094 MORTAR MIXER EN 191-1,196-3,413-2,459-2,ASTM C305 75 İ/D-095 AUTOMATIC MORTAR MIXER EN 191-1,196-3,413-2,459-2,ASTM C305 75 İ/D-142 DIGITAL PULL OFF TESTER EN 1542,1348,1015-12,13687-2,13963 76 İ/D-130 JOLTING TABLE EN 196-1 76 İ/D-132 VIBRATING TABLE FOR 70,7 CUBE MOULDS BS 4550 76 İ/D-159 COMPRESSION MACHINE 250 KN CAPACITY EN 196-1,ASTM C109,C349 77 İ/D-160 COMPRESSION AND FLEXURAL TESTING MACHINE EN 196-1,ASTM C109,C349 77


Page 68


BLAIN AIR PERMEABILITY APPARATUS Product Code::İ/M-

009 Standards: EN 196-6,ASTM C204,AASHTO T153

DIGITAL BLAIN AIR PERMEABILITY APPARATUS Product Code::İ/M-011

Standards: EN 196-6,ASTM C204,AASHTO T153

Used to determine the fineness

of Portland cement in terms of

the specific surface expressed

as total surface area in square

centimeters per gram of

cement. The apparatus is

supplied with glass U-tube

manometer with valve, steel

stand, test cell with disk and

plunger all in stainless steel,

rubber aspirator bulb, 1000

filter paper disks, manometric

liquid, accessories.

Dimensions: 200x160x400 mm

Weight: 9 Kg

WATER FLOWING SIEVES DEVICE Product Code::İ/M-016 Standards: D.M.3/6368

Used to determine the fineness of cement. It consists of a spr ying unit with feed cock

and gauge; brass sieve body 85 mm

dia.and 95 mm high with two stainless steel

cloth disks having opening 0,18 and 0,09

mm. A cement sample of 25 g. is placed inside the

sieve and washed for two minutes by means

of the sprying unit put on top of the sieve. The residue of the retained cement is

obtained by drying the sieve at 110 °C .

Weight:3 Kg

An automatic, microprocessor-controlled analyzer for measurement of the specific surface (Blaine value) of powders. This device operates with 1 or 2 measuring cells. After entry of test-specific sample data into the controller, the test is completely automatically carried out and evaluated. The device has an interface for a generally commercially available printer. Scope of equipment delivered: automatic air permeability tester, 1 bottle of fill oil, 500 ea. round filters (diam. 41 mm), 100 ea. dust filters (diam. 13 mm), 1 ea. Tamper Dimensions: 200x160x400 mm Weight: 12 Kg

FINENESS OF FLY ASH BY WET SIEVING Product Code::İ/M-017 Standards: EN 451-2,ASTM D430

The set, brass made: Consisting of spray nozzle 17,5 mm ID with 17 holes as specified in EN 451-2, a pressure gauge, Digital Manometre 160 kPa capacity sensitive 1 kPa divisions and fittings to attach the apparatus to a standard domestic water supply. Special sieve, ID 50 mm, Stainless steel mesh 0.045 mm Weight: 3 Kg



PACKAGED CEMENT TUBE SAMPLER

BULK DENSITY OF

LIME

Product Code::İ/M-091

Product Code::İ/M-

091 Standards: EN 196-7,ASTM C183,AASHTO T127 Standards: EN 459-2

Used to sample cement homogeneously from cement

bags. Dimensions: dia. 32 x 1050mm Weight: 3 Kg

AIR CONTENT METER 1 LITRE CAPACITY Product Code::İ/M-027 Standards: EN 196-1,EN 413-2,EN 459-2

Designed to deter mine the air content in cement mortar, cement paste and lime mor tar. Made from cast aluminium, the test pot one litre capacity and the upper par t are air-tight sealed by means of two quick action spring clamps. The whole is connected to a dial gauge directly indicating the air entrainment in ercentage, withrange 0 - 50%. A built-in operated air pump is also included. The push-buttons TEST and CORRECTION are arranged to perform the test in a simple and quick system. Dimensions: dia. 200 by 320 mm Weight: 4 kg

Consists of a 1 litre capacity cylindrical container, fi lling ring with opening and hopper with spring-loaded trap. Dimensions: 150 x 150 x 400 mm. Weight: 5.5 kg.

FLOW CONE APPARATUS Product Code::İ/M-038

Standards: EN 445

Used for viscosity and fluidity determinations of mortars, muds, grouts, fluid materials, etc. Mortar fluidity is considered suitable when the flow time of 1000 cc of mortar is comprised between 17 to 25 seconds. Entirely brass made,it is supplied complete with four interchangeable nozzles dia.8 -9 -10 -11 mm. Stand adjustable in heigh, plastic graduated cup. Cone top dia. is 155 mm, total lenght 290 mm, capacity 1700 cc. Weight:10 Kg



MANUEL VICAT APPARATUS Product Code::İ/M-055

Standards: EN 196-3,480-2,AASHTO T131

AUTOMATIC VICAT Product Code::İ/M-044 Standards: EN 196-3,480-2,AASHTO T131

Automatic Vicat needle is a 32 bits equipment, of the last generation which enables to perform the following tests automatically: Initial and final setting time in cement, as per EN 196-3:2005 and ASTM C191 Setting times in gypsum as per EN 13279-2. Normal consistency as per EN 196-3: 2005 and ASTM C187. Setting times in additives for concretes, mortars and pastes, as per EN 480-2. Any other standard or testing rocedure, by means of standard editor incorporated and easily programmable by the user himself. Power supply: 220-240 V 1 ph 50 Hz 40 W Dimensions: 230 x 290 x 355 mm Weight: 16 kg

Used to determine the amount of water required to produce a cement paste of standard consistency and the setting time. The frame is supplied complete with a 300 g consistency plunger (dia. 10 mm). The measurement of the movement is given by an indicator which moves along a scale graduated in millimetres. The apparatus is supplied complete with glass plate and EN Needle and mould. Dimensions: 260 x 250 x 450 (h) mm.



CALORIMETER Product Code::İ/M-061 Standards: EN 196-8,ASTM C186

Used to determine the heat of hydration of low heat Portland and hydraulic cement. The apparatus consists of a Dewar flask contained in an insulated material and housed in a wooden box which is hinged so that the flask can be easily removed or replaced. A “second” hinged wooden box contains the first one, granting a better insulation, as expressly requested by the a.m. Standards. The Calorimeter is supplied complete with a constant speed electric stirrer, Beckman centesimal thermometer, filler glass funnel. The standard supply “does not include the propeller” which must be ordered separately, selecting it from the specific Standard (see accessories) Power supply: 230V 1ph 50Hz 150W Dimensions: 350 x 250 xh 680 mm Weight : 12 kg approx.

AUTOCLAVE Product Code::İ/M-070

Standards: ASTM C151,C141 It consists of a high pressure boiler made from stainless steel, inside dia. mm. 154x430 high, receiving a holding rack for 10 cement

specimens. The heating system is achieved by electric resistances.

The control panel encloses: “digital thermometer” to visualize the

boiler temperature, pressure gauge scale 0 - 600 psi with built in

pressure regulator and power switches. Supplied complete with

safety valves, rack for holding the speci-mens. Power supply: 230 V

1ph 50/60 Hz 3500 W 295 psi Dimensions: 450x475x1080 mm

Weight: 75 Kg CEMENT

MOULDS

Product Code:: Standards:

İ/D-072 PRIZ MOULD 25X25X250 mm TWO GANG ASTM C490

İ/D-073 PRIZM MOULD 75X75X254 mm TWO GANG BS:1881,6073

İ/D-075 PRIZM MOULD 40,1X40X160 mm THREE GANG EN 12617-4,ASTMC438

İ/D-107 PRIZM MOULD 40X40X160 mm THREE GANG EN 196-1,ASTM C348

İ/D-113 PRIZM MOULD 70X70X280 mm THREE GANG NF P18-427

İ/D-115 CUBE MOULD 40X40X40 mm THREE GANG

İ/D-116 CUBE MOULD 50X50X50 mm THREE GANG

İ/D-117 CUBE MOULD 70X70X70 mmm THREE GANG


Page 72


LENGHT COMPARATOR Product Code::İ/M-077

Standards: EN 12617-4,1367-4,ASTM C151,C490

DIGITAL İ/M-077/1 MECHANIC

Precision apparatus used for measuring length changes. Consists of steel base with

levelling feet, chrome plated columns with support for 0.01 dial gauge ,(DIGITAL 0,001 mm) as required by Standards, and two stainless steel contact points. Dial indicator and references must be ordered separately, selecting it from the specific Standard

LE CHATELIER WATER BATH AND MOULD Product Code::İ/M-066

Standards: EN 196-3,BS 6463


Page 73

moulds which are maintained at a height of approx. 50 mm above water level. A device located beneath the lid prevents condensation from falling onto specimens. Two heating elements, 800 W and 200 W, guarantee that the water reaches boiling point within approx. 30 minute. Supplied complete 12 Le Chatelier capacity removable rack, Le Chatelier mould orderer separately.

Power: 220 V, 50 Hz, single phase Dimensions: 390 x 180 x 320 (h) mm.

Weight: 7 kg

In stainless steel, it contains up to 12


PLUNGER PENETRATION APPARATUS Product Code::İ/M-083

Standards: EN 413-2,459-2,1015-4

LEVER SUPPORT Product Code::İ/M-084 Standards: EN 1015-9,13294

Used to determine the consistency of fresh mortar, lime and masonry cement. This apparatus consists in a base, a vertical support, a graduated rod with 25 mm dia. plunger, a test cup 80 mm dia. x 70 mm deep and a 40 mm dia. tamper.Drop height 100 mm. Overall weight of plunger assembly is 90 g. Dimensions: 260 x 250 x 450 (h) mm. Weight : 5 kg

FLOW TABLE MOTORIZED Product Code::İ/M-091

Standards: EN 459-2,1015-3,ASTM C230

LEVER SUPPORT (drill-holder type) Complete with washer and penetration rod brass made, clamp and locking support Used for the determination of stiffening time on products and systems for the protection and repair of concrete structures Contanier dia 90mm height 60 mm Dimensions: 380 x 300 x h500 mm Weight: 12 kg approx ACCESSORIES:DIGITAL BALNCE

15KG 0,5GR DIV. FLOW TABLE MANUEL Product Code::İ/M-090

Standards: EN 459-2,1015-3,ASTM C230

Used for determining the fl ow of mortar and building lime. To perform this test, a specimen contained in a cone mould is placed on a metal surface which is then raised and dropped from a known height, after releasing the specimen from the mould. The equipment consists of a circular top table with spindle, tripod, bronze flow mould, filling hopper and tamper. Weight: 20÷25KG



MORTAR MIXER Product Code::İ/M-094

Standards: EN 196-1,196-3,413-2,459-2,ASTM C305

Planetary speeds: 62 and 125 r.p.m. (clockwise) Beater speeds: 140 and 285 r.p.m. (anticlockwise) The stainless bowl has a 5 litre capacity and quickly engaging clasps ensure that it is easy tsecure tor remove from the mixer The beater is in polished stainless steel. Equipped with double safety devices as required by CEdirectives: one on the bowl lowering assembly and one on the upper safety screen. automatic EN 196-1,EN196-3 standards test. Touchmatic color screen 4,3 " Power : 220 V, 50 Hz, single phase, Wattage: 400 W Dimensions: 550 x 600 x 600 (h) mm Weight: 45 kg

MORTAR MIXER Product Code::İ/M-095 Standards: EN 196-1,196-3,413-2,459-2,ASTM C305

This very robust mixer is expressly designed for the efficient mixing of cement pastes and mortar, with “three” automatic sequences of mixing cycle, in compliance with: EN 196/1, EN 196/3 and EN 480/1 Specifications. Bowl capacity is 4,7 litres Two speeds can be selected: 140 or 285 rpm for the revolving action 62 or 125 rpm for the planetary action It is possible to select the manual working, or one of the two automatic programs. By operating automatically on changes of speed, stops and mixing sequences, outlined by acoustic signal, the unit performs the mixing cycle. The unit is equipped of an automatic sand dispenser which fills the sand into the mixing bowl for a period of 30 seconds (only EN 196/1 program). Complete with safety door conforming to 89/392/CEE Directive; if opened it automatically stops the machine. Supplied complete with stainless steel bowl, but “without beater” which has to be ordered separately. Power supply: 220-240 V 1ph 50 Hz Dimensions: 340x460x700 mm Weight: 45 Kg


Page 75


DIGITAL PULL OF TESTER Product Code::İ/M-142

Standards: EN 1542,1348,1015-12,13687-2,13693

Specifications: - Load capacity: 5-6-16 kN - Resolution: 10 N - Working range: 0,25 to 16 kN - Accuracy and repeatability: better than +/- 1% - Complete with traceable calibration certificate - Battery operated - Hand wheel rounds: 60 with mechanical round/counter - Seat ball assuring axial/central load application Supplied complete with carrying case, but “WITHOUT” accessories to perform the test, which have to be ordered separately. To perform the test a common electric drill is required. Dimensions: 410 x 210 xh 270 mm Weight : 3,5 kg approx.

JOLTING TABLE Product Code::İ/M-130

Standards: EN 196-1,413-2

Used to compact cement mortar prisms 40x40x160 mm in the three gang mould, as requested by the above Specifications. The apparatus, consists of a table holding the mould, seated on a rotating cam driven at 60 revolutions per minute. The jolting group is connected to the table by bayonet joints for quick checking of the weights. The drop height 15,0 mm is adjustable to keep it correct also after intensive uses. The apparatus is supplied with control panel including main switch, automatic digital drop counter, start/stop push buton Power: 220-240 V, 1 faz, 50 Hz, 500 W

Dimensions: 1000x380x420 mm Weight: 60 kg

VIBRATING TABLE FOR 70,7mm CUBE MOULD Product Code::İ/M-132

Standards: BS 4550

The mould is mounted on a vibration platform with excentric mechanism. The machine is supplied complete with control panel with timer, but “without cube moulds” to be ordered separately. Power supply: 220-240V 1ph 50 Hz 250 W Weight: 100 Kg



COMPRESSION /FLEXURAL TESTING MACHINE 15/250 KN CAPATIES Product Code::İ/M-160 Standards: EN 196-1,ASTM C109,C349

it performs a fully automatic test procedure, including speed rate and software for Certificate printing. Upper and lower compression platens dia. 165 mm. The vertical daylight The vertical daylight between platens is 189 mm Dual

loading chamber

:

0 - 250 kN (for

compressio

n tests)

0 - 15 kN (for flexure tests) The low capacity piston (15kN) permits very accurate tests on specimens having low strength (both in compression and in flexure). Max piston’s stroke: 35 mm approx. Safety guards to CE Directive, polycarbonate made with hinges. Two columns rigid frame fitted on a steel base, Calibration and Accuracy: Grade 1.0 The machine is supplied complete with lower compression platen and coupling piece to easily fix the compression / flexural devices. Power supply: 220-240V 1ph 50z 750W Dimensions: 700 x 400 xh 1500 mm Weight : 310 kg approx.

COMPRESSION DEVICE İ/M-162 SAMPLE SIZE FOR 40X40X40X AND 50X50X50 MM CUBE

FLEXURAL DEVICE İ/M-163 SAMPLE SIZE FOR 40X40X160 AND 540,1X40X160 MM CUBE


Page 77


In this section İdillab proposes a wide range of universal electromechanical and hydraulic machines to perform tensile, elongation, flexural, bending, resilience tests on metallic materials, with the possibility to extend these test applications on plastics, rubber, composed materials, wires, ropes, paper, textiles etc. This range of machines satisfies both control tests on steel bars for reinforced concrete,

and quality tests in the iron metallurgy, metals, plastics etc.


Page 78


ANALYTICAL PRODUCT INDEX STEEL


İ/D-003 UNIVERSAL HYDRAULIC TESTING MACHINE 600 KN EN 10002/ASTM A370 80 İ/D-010 HYDRAULIC TENSILE AND COMPRESSION MACHINE ASTM C39,E4,AASHTO T22 81 İ/D-020 MARKING OF MACHINE UNI 556 82 İ/D-050 DRY-ACE MAKER 82 İ/D-052 COOLING BATH FOR RESILIENCE TESTS EN 196-7,ASTM C183,AASHTO T127 82 İ/D-054 SPECIMEN CUTTING MACHINE FOR BAR AND EN 413-2,EN 459-2 83 RECTANGULAR

İ/D-060 PANDULUN IMPACT CHARPY TESTER EN 10045-1,ASTM E23 83 İ/D-065 COLD BEND MACHINE EN 445 83 İ/D-055 TORSION TESTING MACHINE EN 196-3,480-2,AASHTO T131 84


Page 79


UNIVERSAL HYDRAULIC TENSILE TESING MACHINE 600 KN CAPATIES Product Code::İ/D-003 Standards: EN 10002/ASTM A370

It basically consists of: - Strong loading frame - Hydraulic servo-controlled unit, for the data

acquisition, control and processing. The whole is built in

a console. The frame is designed to carry out tensile tests using the grips placed in the clamping heads. In the upper part, between the head and traverse, it is possible to carry out flexion, compression, bending by using the suitable accessories devices. The hydraulic servocontrolled unit regulates the load rate by the Computer. An emergency device stops the machine in any moment as per the International Safety Standards. The machine is supplied complete with loading frame, control console, software, ronud samples :8-32 grips and flat samples grips.

Capacity : 600kN Clemping head : pneumatic control Max. crosshead stroke : 120 mm Max. distance between the jaws : 420 mm Distance between Compression plates : 320 mm Load reading : Sensing by loading cell. Resolution 0,01% U.V. Accuracy : Class 1 EN 10002/2 Stroke reading Sensing by linear transducer Resolution : 0,01 mm Deformation reading : Sensing by electronic extensometer Resolution : 0,001 mm Needed height : 3000 mm Frame weight : 1500 kg approx. Power Supply 220 V 1ph 50 Hz


Page 80


HYDRAULIC TENSILE AND COMPRESSION MACHINE 500 KN CAPATIES Product Code::İ/D-010 Standards: ASTM C39,E4,AASHTO T22

This machine of compact design, is utilized to carry out tensile tests

on steel reinforced bars from dia. 6 to 25 mm. and flat max. 25x15

mm.

It can also carry out compression tests on concrete cube specimens max.

side 150 mm. and cylinders max. dia. 160x320 mm. The four columns loading frame is overdimensioned to assure high rigidity

and stability. The loading piston, double action, is rectified and lapped. The

piston is foreseen of an hydraulic maximum and minimum piston stroke’s

security device, by avoiding any damage risk due to wrong manipulations

of the unit. An hydraulic selector allows to select the tensile or the

compression test. The heads holding the jaws are obtained from only one

block of high tungsten steel, while the jaws are hardened over 65 HRC.

The “V” autoclamping form allows a quick and practical churking of the

specimen.

The machine is supplied complete with pair of jaw-holders, but

“without” accessoires for the tensile and compression tests, which

must be ordered separately

TECHNICAL SPECIFICATIONS: - Maximum tensile load: 500 kN - Maximum compression load: 1500 kN - Distance between the jaws: min. 300 mm - max. 400 mm - Distance between the compression platens: 340 mm - Distance between the columns: 270 mm - Piston’s stroke: 100 mm - Precision and repeatability: ± 1% of read value - Power supply: 230 V 1 ph 50 Hz 750 W - Dimensions: 780x420x1700 - Weight: 850 ÷ 900 kg


Page 81


MARKING OF MACHINE Product Code::İ/D-020 Standards: UNI 556

Manual, motorised Used to mark off specimens with round, square shape and with improved bond for the measurement of the percentage elongation after their breaking, in accordance with the Standards. The machine can mark specimens as follows: - Round from 4 mm up to 50 mm. diameter. - Flat from 4 mm. up to 50 mm thickness. - Square from 4 mm. to 45 mm. side. Useful length 300 mm. Power.220V 1ph 50 Hz Dimensions: 500x450x450 mm. Weight: 50 Kg

DRY-ACE MAKER FOR SOLID CO2 Product Code::İ/D-050 Standards:

COOLING BATH FOR RESILIENCE TESTS Product Code::İ/D-052 Standards:

This device instantaneously produces the quantity of dry ice (solid CO2) required to reach temperatures down to -80 °C. The dry -ice maker must be connected to a liquid CO2 bottle with connecting pipe and it produces 100 g. dry-ice tablets, having mm. 75 diameter and mm. 25 thickness. Weight: 3 Kg

This apparatus is meant for Charpy tests to be carried out at low temperatures. It is made from double chambered stainless steel with isolating cavity wall from foamed polyurethan, 65 mm. thick. Complete with double chambered cover and specimen rack. Internal dimensions: mm. 125x125xh 180 Weight: 12 Kg



SPECIMEN CUTTING MACHINE FOR BAR AND RECTANGULAR SAMPLES Product Code::İ/D-054 Standards:

PANDULUN IMPACT CHARPY TESTER Product Code::İ/D-060 Standards: EN 10045-1,ASTM E23

It accepts blades up to dia. 350 mm Shear capacity: 120 mm Power supply: 220-240 V 1F 50 Hz 2000W Dimensions: 560x460x390 Weight: 20 Kg

COLD BEND MACHINE Product Code::İ/D-065 Standards: ASTM A615,A615M

The tester is equipped with a falling pendulum hammer, able to break, with

a single blow, a sample carved in the middle and positioned on two supports The test is carried out on a CHARPY sample in order to check the energy absorbed during the impact, which is measured in JOULE. The value stands for the impact strenght of the material (resilience). Cast iron frame Pendulum with hardened knife Brake device to stop the pendulum Impact energy 300J with 2J Graduation Falling angle: 140° Real weight Kg. 21,300 Impact speed: 5,182 m/s Dimensions : 450x900x1700 mm Weight: 470 Kg

This equipment has been studied and designed to perform bending tests on steel bars for reinforced concrete. The test consists in bending the bar at 180° or to bend the same at 90° and then straighten if of at least 20°. This bending machine is composed of a rugged frame supporting a beam having a cylinder with relevant load piston fixed on it, being activated by an hydraulic cell complete with speed adjuster for the piston, direction control valve, max. pressure valve, control gauge. The whole is cased to protect every single component from the dust, and the operator from any possible danger. A small bowl has been fitted under the beam, where the steel bar is bent. Two contrasting rollers are fitted on the beam. They may easily be adjusted in distance to be in accordance with the Standards concerning bars having diameter between 5 and 40 mm. Fixing and changing the mandrels on top of the thrust cylinder is easy and practical and grants the operator a perfect interchangeability of the same. A device prevents the unlocking of the bar under test from the relevant rollers and the contrasting mandrel both during the bending and the staightening operation. The machine accepts bars up to Ø 40 mm. and is supplied complete with two series of rollers, having respectively Ø mm. 50 and 100. The mandrels, the mandrel-holders and the brackets are not included in the standard supply and have to be ordered separately.



TORSION TESTING MACHINE Product Code::İ/D-055 Standards:

The torsional rigidity of the metal Materials will this device is designed to detect. The device can be designed according to different capacities. There are 9 different models including 100-200-300-400-500-750-1000-2000-3000 NMR. The device consists of the following main sections namely: One fixed and one movable holder including two 0.1 degree precision encoder Torkcell that vary according to capacity. Automatic color touch screen control panel. The maximum speed of 3 rpm like to use two-way adjustable soundless movement and the group is composed of frame. Dimensions: 760x1100x1060 mm Weight: 150 kg


Page 84


For the realization of civil engineering structures, the engineer during the design stage must base his calculations according to the soil properties where the structure will have to integrate. This section studies and analyses a soil sample to evaluate and to know its characteristics, by

proposing a complete range of testing equipment for: sampling, preparation, classification,

consolidation, shear strength, triaxial, compaction, penetration, bearing capacity, permeability,

density, geotechnical and chemical tests, in compliance with the EN, ASTM, BS and the most

known International Standards.


Page 85


ANALYTICAL PRODUCT INDEX STEEL


İ/T-051 DYNAMIC CONE PENETROMETER EN 932-5,1097-5,ASTM C127-136 87 İ/T-052 MACKINTOSH PROSPECTING KIT 87 İ/T-092 SAMPLE AUGER SET 88 İ/T-095 AUGER POWER HEAD 88 İ/T-086 PROVING RING PENETROMETER 88 İ/T-088 PROCTOR PENETROMETER ASTM D1558 89 İ/T-060 NUCLEAR MOISTURE DENSITY GAUGE ASTM D6938,2950,C1040,AASHTO T310 89 İ/T-111 MOTORIZE HYDRAULIC EXTRUDER 90 İ/T-114 UNIVERSAL EXTRUDER HAND OPERATED 90 İ/T-120 SOIL LETHE 90 İ/T-147 CONE PYKNOMETER BS 1377:2 91 İ/T-148 SAND ABSORPTION CONE AND TAMPER BS 812 91 İ/T-155 PARTICLE SIZE ANALYSIS OF SOILS ASTM D422,AASHTO T88 91 İ/T-152 BLUE MATHYLENE TEST SET EN 933-9 92 İ/T-158 SAND EQUIVALENT TEST SET EN 933-8 92 İ/T-159 SAND EQUIVALNET SHAKER HAND OPERATED EN 933-8,ASTM D2419,AASHTO T176 92 İ/T-160 SAND EQUIVALNET SHAKER MOTORIZED EN 933-8,ASTM D2419,AASHTO T176 93 İ/T-165 LIQUID LIMIT CONE PENETROMETER BS 1377:2 93 İ/T-170 LIQUID LIMIT CASAGRANDE HAND OPERATED ASTM D4318,AASHTO T89,BS 1377:2 93 İ/T-171 LIQUID LIMIT CASAGRANDE MOTORIZED ASTM D4318,AASHTO T89,BS 1377:2 94 İ/T-178 PLASTIC LIMIT ASTM D4318,AASHTO T90,BS 1377:2 94

İ/T- PROCTOR TEST MOISTURE-DENSITY RELATIONSHIP ASTMD558,D698,ASSHTO T99,134,BS:1377 94 İ/T- PROCTOR RAMMERS ASTM-EN-DIN 95

İ/T-199 SOIL COMPACTOR PNEUMATIC SYSTEM 96 İ/T-200 SOIL COMPACTOR MOTORIZE SYSTEM 96

İ/T- CALIFORNIA BEARING RATIO SETS (CBR) ASTMD1883,AASHTO T193,BS 1377:4,1924 97 İ/T-238 RELATIVE DENSITY OF COHESIONLESS SOIL ASTM D4253,D4254 98 İ/T-210 CBR LOADING MACHINE HAND OPERATED ASTM D1883,AASHTO T193,BS 1377:4 98 İ/T-211 CBR LOADING MACHINE MOTORIZED WITH L.RING ASTM D1883,AASHTO T193,BS 1377:4 99 İ/T-216 CBR LOADING MACHINE MOTORIZED DIGITAL ASTM D1883,AASHTO T193,BS 1377:4 99 İ/T-222 PLATE BEARING TEST SET ASTM D194,D1195,1196,BS 1377:9 100 İ/T-230 BALLON DENSITY METHOD ASTM D2167,AASHTO T205 101 İ/T-234 SAND DENSITY CONE 6,5” ASTM D1556,AASHTO T191 101 İ/T-245 CONSTAND HEAD PERMEAMETERS ASTM D2434,AASHTO T215,BS 1377:5 102 İ/T-246 FALLING HEAD PERMEAMETERS 102 İ/T-265 CONSOLIDATION TEST SET 3 UNIT ASTM D2435,D3877,D4546,AASHTO T216 103 İ/T-277 DIRECT RESIDUAL SHEAR TEST APPARATUS ASTM D3080,BS 1377:7,AASHTO T236 104


Page 86


DYNAMIC CONE PENETROMETER Product Code::İ/T-051 Standards: EN 932-5,1097-5,ASTM C127-136

Single Mass dynamic cone penetrometer is faster, cheaper and valuable tool for identifying weak spots in embankments,

measuring uniformity of material and locating boundaries of subcuts and also be used to delineate between layers of

frozen and unfrozen soils. (It should not be used in highly stabilized or cemented materials or for granular materials

containing aggregates greater than 50mm) The instrument is manufactured from stainless steel to the following

specifications:- Hammer weight measurement of 8 Kg. Tolerance is 0.004K- Drop of hammer measurement of 575mm.

Tolerance is 1.0mm.- Tip included angle measurement of 60 degrees. tolerance is 1 degree.- Tip base diameter

measurement of 20mm. tolerance is 0.25mm. Full information and descriptions for how to assemble the instrument, conduct a test and DCP test

worksheet are included in our brochures and the user guide documents.

MACKINTOSH PROSPECTING KIT Product Code::İ/T-052 Standards:

This equipment is particularly useful for initial site investigation work in remote areas. The kit is capable boring to a depth 10 - 12 mtrs depending on ground conditions. The use of specially designed extension rod couplers reduces borehole friction to a minimum, permitting easy operation to considerable depth.

Equipment consists of: - 12 boring rods 1 mtr long with 12 couplers - 2 pipe wrench and 1 tap wrench - Core tube adaptor and clay core tube - Driving head and clearing rod - Long and short driving point - Auger tool and standard core tube - Lifting/driving tool and hammer - Die nut and hand tap All equipment supplied in a strong wooden box

Weight: 45 kg approx



SAMPLE AUGER SET Product Code::İ/T-092 Standards:

This kit contains a range of selected items for boring and sampling up t a diameter of 150 mm. The kit consists of: 1 Soil Auger 50 mm Diameter 1 Soil Auger 75 mm Diameter 1 Soil Auger 100 mm Diamater 1 Soil Auger 150 mm Diamater 10 Extension Rods Each 1 m Long 2 Stillson Wrenches 1 Chisel 10 Sample Tubes 38 mm Dia. x 230 mm Long 5 Adaptors 1 Jarring Link

AUGER POWER HEAD Product Code::İ/T-095 Standards:

Piston displacement:44,9 CC Engine:2 (HP) Fuel:GASOLINE Augers:DIA 80 MM LENGHT 800 MM Max. drilling capacity:DIA 220 MM Max drilling depth:1,4 M Operation:ONE OPERATOR Weight :11 KG

T95-01 Auger 60 mm dia. x 1 m long T95-02 Auger 80 mm dia. x 1 m long T95-03 Auger 100 mm dia. x 1 m long T95-04 Auger 150 mm dia. x 1 m long T95-05 Auger 200 mm dia. x 1 m long T95-06 Extension rod

PROVING RING PENETROMETER

Product Code::İ/T-086

Standards:

Used to determine the bearing strength,

compaction degree of subgrades, and also for

determining the penetration resistance of soil.

Supplied complete with “T ” handle,proving ring

100 kgf (1 kN) with maximum load pointer and

calibration chart, extension rod 500 mm.long

graduated ever y 100 mm., removable cone

point 30 ° with 1 sq.in.top area.

Cadmium plated against corrosion.

Weight:5Kg



PROCTOR PENETROMETER Product Code::İ/T-088 Standards: ASTM D1558

Used to determine in field the moisture-

penetration resistance relationship of fine grained

soils. Spring load with direct reading in Kg. on the sliding rod. Complete with 9 interchangeable stainless steel needles dia. 4,52 - 5,23 - 6,40 - 9,07 - 12,83 - 16,54 - 20, 22 - 24,79 - 28,55 mm., accessories, carrying case. Chromed finishing. Weight: 8 Kg

NUCLEAR MOISTURE DENSITY GAUGE Product Code::İ/T-060 Standards: ASTM D6938,2950,C1040,AASHTO T310

Density Measurement Range : 1120 to 2720 Kg/m3 (70 to 170 Ib/ft3) Moisture Measurement Range : 0 to 640 Kg/m3 (0 to 40 Ib/ft3) Density Source : Cesium 137 Moisture Source : Americium 241: Beryllium Density Source Activity : 370 Mbq, (10 mCi) Moisture Source Activity : 1.48 Gbq, (40 mCi) BS Precision at 2000 Kg/m3,(125 Ib/ft3) : 7.8 Kg/m3 (0.49 Ib/ft3) Direct Transmission Precision at 2000 Kg/m3 (125 lb/ft3J : 3.5 Kg/m3 (0.22 Ib/ft3) Moisture Precision at 240 Kg/m3 (15 Lb/ft3) : 4.42 Kg/m3 (0.28 Lb/ft3) Composition Error BS : 22.4 Kq/m3 (1.4 Lb/ft3) Composition Error Direct Transmission : 22.4 Kg/m3 (1.4 Ib/fB) Surface Error BS : 48 Kg/m3 (3 Ib/ft3) Surface Error 150 mm (6") depth : 16 kg/m3 (1 Ib/ft3) Backlight Display : Yes Internal Temp Monitoring : Yes Shielding Materials : Lead, Tungsten and Cadmium Top Shell : UV Stabilized Plastic Base and tower : Aluminum Source Rod and Handle : Stainless Steel Index Rod : Stainless Steel Operating Temperature (ambient) : -10 to 70 C (14 to 158 F)_ Surface Temperature : 170 C (338 F) Gauge Size : H 58.4 cm X L 30,8cm X W Shipping Weight : 42 Kg (94 Ib)


Page 89


MOTORIZE HYDRAULIC EXTRUDER Product Code::İ/T-111 Standards:

UNIVERSAL SAMPLE EXTRUDER Product Code::İ/T-114 Standards: Hand operated, actuated by a 5 tons hydraulic jack, it is designed to extrude samples having dia. 4” and 6”. It can therefore extrude Marshall, CBR, Standard and Modified Proctor specimens. Dimensions: 300x500X450 mm Weight: 30 Kg

SOIL LATHE Product Code::İ/T-120 Standards:

Designed to reduce by trimming the diameter of a soil sample unitil reaching the desired diameter size by using a wire saw. The lathe is hand-operated, the height is adjustable up to 230 mm, and it accepts samples from dia. 38 to 110 mm. Supplied complete with three sets of platens for samples dia. 38 50,47 - 60 mm, wire saw and 6 wires. Dimensions: dia. 460x720 mm Weight: 20 Kg

Used for a smooth and rapid extrusion of soil samples from tubes also of thin walls with minimum disturbance. The unit extrudes samples from dia. 35 up to 101,6 mm with max. stroke of 900 mm. The hydraulic piston is equipped of speed adjuster and can be stopped in any excursion’s position. Max. load: 30 kN The extruded sample is held in place by a receiving table adjustable in height and easily lowered along side the machine to save space. Complete with adaptors (ring + tamper) to extrude samples having dia. 38, 83, 100 mm Power supply: 220-240 V 1ph 50/60 Hz 1300 W Dimensions (working position): 2741 x 635 xh 1200 mm Weight: 160 kg



CONE PYKNOMETER SAND ABSORPTION CONE AND TAMPER Product Code::İ/T-147 Product Code::İ/T-148 Standards: BS 1377:2 Standards: BS 812,ASTM C128

For particle density (specific gravity) of sands and fine aggregate, relative density and water absorption for aggregates max. 10 mm size. Glass jar made with aluminium cone and rubber seal. Capacity: 1000 g.

For the determination of

the particle

density (specific

gravity) of fine

aggregates, max.

20 mm size.

PARTICLE SIZE ANALYSIS OF SOILS Product Code::İ/T-155 Standards: ASTM D422,AASHTO T88

To determine the quantitative granulometric distribution of particle-size in soils passing through the ASTM n° 200 sieve (0,074 mm) The set consists of: T-155-01 Sedimentation cylinder 1000 ml capacity (total n° 6 pieces) V-172 Soil Hydrometer 151 H, scale: 0,995÷1,038 g/ml with div. 0,001 T-155-04 Glass tank, dimensions: 600x300x380 mm T-104-03 Pyrex beaker, 250 ml capacity V-300-23 Sodium hexametaphosphate, 1000 g T-156-01 Mechanical analysis stirrer, 10000 rpm, complete with paddle, cup and anti-splash baffle. Used for dispersing soil samples in water. 220-240 V 1ph 50 Hz T-155-08 Heater, thermostat, cooling coil, circulation unit, thermometer. 220-240 V 1ph 50 Hz 1000 W. Weight of the set: 60 Kg



BLUE MTHYLENE TEST SET Product Code::İ/T-152 Standards: EN 933-9

Electric stirrer adjustable from 400 to 700 rpm, complete with 70 mm dia. propeller. 200-240 V 1ph 50 Hz Support base for stirrer Burette 50 x 0,1 ml with stopcock Support base for burette Pan 200x150x80 mm Filter paper 90 mm dia. (pack of 100) Glass rod dia. 8x300 mm 3000 ml capacity plastic beaker Methylene blue, 100 g Kaolinite, 500 g Total Weight: 10 Kg

SAND EQUIVALENT TEST SET Product Code::İ/T-158 Standards: EN 933-9

Used to determine the relevant proportions of clay-like or plastic fines and dusts in granular soils and fine aggregates The apparatus consists of 4 graduated plastic cylinders, rubber stopper, irrigator tube, weighted foot assembly, syphon assembly, rubber tubing, measuring tin, funnel and bottle of special concentrated solution (250 ml).

SAND EQUIVALENT SHAKER MANUEL Product Code::İ/T-159 Standards: EN 933-8,ASTM

Hand operated working

through handwheel. Complete

with mechanical strokes

counter. Dimensions:

700x350x420 mm Weight: 20

Kg


Page 92


SAND EQUIVALENT SHAKER MOTORIZED Product Code::İ/T-160 Standards: EN 933-8,ASTM

The unit provides a constant uniform shaking with automatic cycle test. Oscillating excursion is 200 ± 10 mm at 180 strokes/min rate.

Complete with timer that automatically stops the shaker at the end of the test. Power supply: 220-240V 1ph 50 Hz 250 W Dimensions: 700x360x350 mm Weight: 30 kg.

LIQUID LIMIT CONE PENETROMETER Product Code::İ/T-165 Standards: BS 1377:2

Equipped with a magnetic controller device with

electronic digital programmable timer that

automatically releases the plunger head and

ensures free falling of the cone during the 5-

seconds test. Supplied complete.

Power supply: 230V 1ph 50Hz 200W Dimensions: 220x280x410 mm Weight: 15 kg approx.

LIQUID LIMIT CASAGRANDE HAND OPERATED Product Code::İ/T-170 Standards: ASTM D4318,AASHTO T89,BS 1377:2

With ebonite base and removable brass cup. The height of drop of the cup may be adjusted via the hand crank mechanism. A built-in blow counter is supplied as standard. Grooving tool is not supplied and must be ordered separately. Dimensions: 150 x 150 x 120 (h) mm. Weight: 3 Kg


Page 93


LIQUID LIMIT CASAGRANDE MOTORIZED Product Code::İ/T-171 Standards: ASTM D4318,AASHTO T89,BS 1377:2

With ebonite base and removable brass cup. The height of drop of the cup may be adjusted via the hand crank mechanism. A built-in blow counter is supplied as standard. Grooving tool is not supplied and must be ordered separately. Dimensions: 150 x 170 x 120 (h) mm. Weight: 3,5Kg

PLASTIC LIMIT Product Code::İ/T-178 Standards: ASTM D4318,AASHTO T89,BS 1377:2

The plastic limit determines the lowest moisture content of a soil, by wich a sample can be rolled into threads 3 mm. dia. without breaking the same neither longitudinally or transversely. The set complete with carrying case comprises: T-178-01 Glass plate 300x250x10 mm T-178-02 Rod caliper 3 mm dia. V114-03 Mixing porcelain dish 120 mm dia. V192 Flexible spatula, 100 mm. blade V122 Aluminium moisture tins dia. 55x35 mm. (Q.ty 6) T-178-03 Plastic carrying case Weight: 5 Kg

PROCTOR TEST MOISTURE-DENSITY RELATIONSHIP Product Code::İ/T- Standards: EN 13286:2,ASTM D558,D698,AASHTO T99,T134,T180,BS 1377:4,1924:2

Used for determining the relationship between the moisture content and density of

compacted soils. Steel made, complete with mould body, collar and base; plated

against corrosion.

İ/T-185 STANDARD PROCTOR MOULD ASTM/AASHTO/NF DIA.101,6 mm HEIGHT 116,4 mm

İ/T-186 MODIFIED PROCTOR MOULD ASTM/AASHTO DIA.152,4 mm HEIGHT 116,4 mm

İ/T-190 MODIFIED PROCTOR MOULD NF DIA.152 mm HEIGHT 152 mm

İ/T-191 STANDARD PROCTOR MOULD BS DIA 105 mm HEIGHT 115,5 mm

İ/T-194 STANDARD PROCTOR MOULD EN 13268:2 DIA 100 mm HEIGHT 120 mm

İ/T-194 MODIFIED PROCTOR MOULD EN 13268:2 DIA 150 mm HEIGHT 120 mm



PROCTOR RAMMERS Product Code::İ/T- Standards: EN 13286:2,ASTM D558,D698,AASHTO T99,T134,T180,BS 1377:4,1924:2

Used to compact the soil sample into the mould. The spherical hand knob is from bakelite

with metal screw and protection ring nut; guide sleeve with vent holes. Plated against

corrosion.

İ/T-187 STANDARD PROCTOR RAMMER ASTM/AASHTO DIA.50,8 mm HEIGHT 304,8..WEIGHT.2,495 kg

İ/T-187-01 STANDARD PROCTOR RAMMER EN 13286:2 DIA.50 mm HEIGHT 305 mm..WEIGHT.2,5 kg

İ/T-188 MODIFIED PROCTOR RAMMER ASTM/AASHTO/NF DIA.50,8 mm HEIGHT 457,2 mm.WEIGHT.4,536 kg

İ/T-188-01 MODIFIED PROCTOR RAMMER EN 13286:2 DIA 50 mm HEIGHT 457 mm..WEIGHT 4,5 kg

İ/T-194-05 PROCTOR RAMMER DIN 18127 DIA 50 mm HEIGHT 300mm…WEIGHT 2,5 kg

İ/T-194-06 PROCTOR RAMMER DIN 18127 DIA 50 mm HEIGHT 450mm… WEIGHT 2,5 kg

İ/T-194-07 PROCTOR RAMMER DIN 18127 DIA 75 mm HEIGHT 450mm.. WEIGHT 4,5 kg

RAMMERS

MOULDS


Page 95


SOIL COMPACTOR PNEUMATIC SYSTEM Product Code::İ/T-199 Standards: TS 1900-1, BS1377,1924; ASTM D558, D560, D698, D1557, AASHTO T99, T134, T136, T180

Pneumatically operated automatic soil compaction hammer produces consistent

results and quieter operation. 25 blows delivered in 31 seconds at 12 in (304.8

mm) drop (42 seconds for 18 in (457.2 mm) drop). No manual adjustments

required. Easy hammer and mold change takes only 15 seconds. Hammer stops

in raised position for easy mold change or filling. Air cylinders and sensors

assure precise, consistent, repeatable drop every time. The Automatic Soil

Compaction Hammer comes complete with 2 hammers and 2 compaction molds:

- Hammer, 5.5 lb (2.5 kg), without pie shaped foot - Hammer, 10 lb (4.5 kg), with

pie shaped foot - Mold, (101,60 mm) diameter - Mold, (152,40 mm)diameter

SOIL COMPACTOR MOTORIZE SYSTEM Product Code::İ/T-200 Standards: TS 1900-1, BS1377,1924; ASTM D558, D560, D698, D1557, AASHTO T99, T134, T136, T180

Preset blow pattern ensures even compaction. Solid state controls for reliability and maintenance. Automatic digital counter which re-sets t zer on completion of test. Adjustable rammer drop height 0-450mm. Rammer weight adjustable 2.5-4.5 kg.

Preset number of blows per layer by thumb wheel control Rammer : BS Circular faced, 50 mm dia, adjustable t 2.5 kg or 4.5 kg weight ASTM Circular faced 2 in (50.8 mm0 dia, adjustable t 5.5 lb (2.5 kg) dia, or 10 lb (4.5 kg) weight Drop: BS Adjustable t 300 mm or 450 mm ASTM Adjustable t 12 in (305 mm) or 18 in (457 mm) Dimensions: 450x 600 x 1680 mm. Weight: 180 Kg


Page 96


CALIFORNIA BEARING RATIO SETS(CBR) Product Code::İ/T-200 Standards: ASTM D1883, D3668 - AASHTO T193 - CNR/UNI 10009 - UNE 103:502 - NF P94-078, P94-093 - BS 1377:4, 1924:2

CBR Moulds ve Accessories / CBR Kalıpları ve Aksesuaraları Models / Modeller Description Standards Standards Standards

ASTM NF P94-078 BS 1377:4

AASHTO NF P94-093 BS 1924:2

CBR mould complete with collar and perforated base:

Dia. 6" (152,4 mm) x 7" (177,8 mm) height İ/T-200-01

Dia. 152 mm x 152 mm height İ/T-201

Dia. 152 mm x 127 mm height İ/T-202

Split CBR mould with collar and peforated base: Dia. 6" (152,4 mm) x 7" (177,8 mm) height İ/T-200-13

Dia 152 mm x 152 mm height İ/T-201-01

Solid base plate for CBR mould İ/T-200-12 Perforated base plate for CBR mould İ/T-201-12

Filter screen, stainless steel dia. 149 mm İ/T-200-02 İ/T-200-02 İ/T-200-02

mesh0,150mm(ASTMn° 100)

Spacer disc with "T" handle : Dia.5 15/16" (150,8 mm) x 2,416" (61,4 mm) height. İ/T-202-03

Dia. 151 x25,4 mm height İ/T-201-02

Dia. 151x36 mm height İ/T-201-06

Dia. 150x50 mm height İ/T-202-07

Perforated (sweel) plate İ/T-200-04 İ/T-200-04 İ/T-200-04

with adjustable stem

Tripod (dial gauge support) İ/T-200-05 İ/T-200-05 İ/T-200-05

Dial gauge 10 mm range, 0,01 mm subd İ/T-376 Dial gauge 25 mm range, 0,01 mm subd İ/T-377 İ/T-377

Annular surcharge weight 2270 g. İ/T-200-07 Annular surcharge weight 2300 g. İ/T-200-07

Annular surcharge weight 2000 g. İ/T-202-08

Slotted surcharge weight 2270 g İ/T-200-08 Split surcharge weight 2300 g İ/T-201-04

Split surcharge weight 2000 g İ/T-202-09

Cutting İ/T-200-09 İ/T-200-09 İ/T-200-09

Compaction rammer: Ø 50,8, mm fall height 457,2 mm, weight 4,54 Kg İ/T-188

Ø 50, mm fall height 457,2 mm, weight 4,54 Kg İ/T-188-01

Ø 50, mm fall height 450 mm, weight 4,5 Kg İ/T-193

Straight edge 300x30x3 mm İ/T-200-11 İ/T-200-11 İ/T-200-11

Filter paper dia. 150 mm (pack of İ/T-200-14 İ/T-200-14 İ/T-200-14

Soaking tank 600x400x400 mm İ/T-201-05 İ/T-201-05 İ/T-201-05


Page 97


RELATIVE DENSITY OF COHESIONLESS SOIL Product Code::İ/T-238 Standards: ASTM D4253,D4254

The equipment consists of: vibrating table 765x765 mm, actuated by a

vibrator of 3600 rpm. with adjustable amplitude. Relative density mould sets 0,1 and 0,5 cu.ft.,

cylindrical shape, complete with two guide

sleeve with clamp assembly, two surcharge

base with handle, two surcharge weights. Dial gauge with measuring device.

Power supply: 220-240 V 1ph 50

Hz Weight: 300 Kg approx

CBR LOADING MACHINE HAND OPERATED Product Code::İ/T-210 Standards: ASTM D1883,AASHTO T193,BS 1377:4

Load is applied through a meckanical jack and handwheel. Upper beam can be adjusted in height. F"n of fast approach device of the base plate. The machine is supplied complete with: Load Ring 30 kN capacity, calibrated with relevant Calibration Certificate Penetration piston Dial gauge with dial gauge

holder Dimensions:

430x380x1180 mm Weight: 80

Kg



CBR LOADING MACHINE MOTORIZED WITH LOAD RING Product Code::İ/T-211 Standards: ASTM D1883,AASHTO T193,BS 1377:4

Load is applied through a screw jack driven by an electric motor at a costant penetration rate of 1,27 mm/min achieved by a built in gear box and assured also under load. Upper beam an be adjusted in height. Foreseen of fast approach device of the base plate and electric end of stroke switches of the load plate to save the machine from wrong manipulations. The machine is supplied complete with:

• Load Ring 50 kN capacity, calibrated with relevant Calibration Certificate

• Penetration piston • Dial gauge with dial gauge holder Power supply: 220-240 V 1ph 50 Hz 750 W Dimensions: 430x380x1180 mm Weight: 98 Kg

CBR LOADING MACHINE MOTORIZED WITH LOADCELL Product Code::İ/T-212 Standards: ASTM D1883,AASHTO T193,BS 1377:4

Ruggedly constructed with frame t encompass the strain and loads, easy t use, it is designed t operate with the minimum of maintenance. Platen rate is 1.27-1 mm/minute als maintained under load thanks t an overpowered electric motor. The applied load is measured by a precision load cell 50 kN capacity and max load anf flow are shown on the display. Safety devices limit cylinder stroke while controlling stability measuring instrument and mould. The unit is supplied complete with load cell 50 kN capacity, penetration piston with displacement transducer. Max. vertical span: 645 mm Horizontal span: 275 mm. Cylinder stroke: 60 mm. Power: 220-240 V 1 ph 50 Hz 750 W Dimensions: 520 x 550 x 1450 (h) mm. Weight: 155 Kg


Page 99


PLATE BEARING TEST SET Product Code::İ/T-222 Standards: ASTM D194,D1195,D1196,BS 1377:9

Complete test set comprising: Triple-gauge measuring beam, made of aluminium tubes with 3 height adjustable support Bearing plate 300 mm dia. with 3 rods and holding ring Set of pluggable extension rods, made of light alloy Upper ball and socket joint Hydraulic system 100 kN comprising piston, pressure tube 2 m and hand operated pump with pressure gauge

100 mm dia., range 0-290 bar/0-0.8 MN/m2 for bearing plate 300 mm dia. Dial gauge 30 mm, sens. 0.01 mm with bracket

Hydraulic Jack 100-200-500 kN capacity, complete with hand pump Pressure gauge dia. 200 mm, range 0-100 kN, div. 100 N Carrying cases. Weight: 110 Kg approx.


Page 100


BALLON DENSITY METHOD Product Code::İ/T-230 Standards: ASTM D2167,AASHTO T205

Used to determine the in-situ density of fine graded compacted orbonded soil. The apparatus is placed over the hole excavated in the soil, and water is pumped into a rubber balloon and forced into the hole. The amount of water displaced into the ballon is measured from the graduation of the scale. The instrument consists of a graduated plexiglass cylinder 1600 ml. capacity, fitted in a corrosion resistant frame, a rubber pump with stop valve, a density plate and 12 rubber balloons. Dimensions: 250x240x680 mm Weight: 6.5 Kg

SAND DENSITY CONE 6,5 “ Product Code::İ/T-234 Standards: ASTM D1556,AASHTO T191

Used to determine the in-situ density of fine graned compacted soil. The apparatus consists of a steel double metal cone with valve, plastic 5 litre jars, metal base with centre hole. Weight: 5 Kg

with cone diameter of 12” (305 mm), recommended for coarse grained soil and gravel (over 38 mm diameter) Weight: 20 Kg



CONSTAND HEAD PERMEAMETER Product Code::İ/T-245 Standards: ASTM D2434,AASHTO T215,BS 1377:5

Used to determine the permeability of granular, gravel and sand soils. The specimen is formed in an acrylic permeability cell, and water is passed through it from a constant level tank. The permeability cell has pressure points at different levels which are connected to the manometer tubes fixed on a stand with graduated scale. Two constant head permeability cells are available: 75 mm and 114 mm diameter.

FALLING HEAD PERMEAMETER Product Code::İ/T-246 Standards: ASTM D2434,AASHTO T215,BS 1377:5

Used to determine the permeability of granular, gravel and sand soils. The specimen is formed in an acrylic permeability cell, and water is passed through it from a constant level tank. The permeability cell has pressure points at different levels which are connected to the manometer tubes fixed on a stand with graduated scale. Two constant head permeability cells are available: 75 mm and 114 mm diameter.


Page 102


CONSOLIDATION TEST SET 2 UNIT Product Code::İ/T-265 Standards: ASTM D2435,D3877,D4546,AASHTO T216

Rigidly manufactured from aluminium alloy casting to provide a high degree of accuracy with any frame distorsion under load. The load bridge group is supported in high accuracy self-aligning seat balls. The beam provides three loading ratio: 9:1 10:1 11:1 and the beam assembly is fitted with an adjustable counterbalance weight. Maximun load: 150 kg of slotted weights. The oedometer accepts cells up to 100 cm2. Supplied without: consolidation cell, weights, dial gauge , holding bench which have to be ordered separately. Weight: 23 Kg


Page 103


DIRECT RESIDUAL SHEAR TEST APPARATUS Product Code::İ/T-121 Standards: ASTM D3080,BS 1377:7,AASHTO T236

The System is capable of performing the consolidation and shearing phases of a standard direct shear and residual shear test under semi atomatic control. The system consists of a computer-controlled unit that utilizes micro-stepper motors to apply the vertical and horizontal loads to the soil specimen. The system is capable of running a consolidation phase for up to 32 increments automatically. Horizontal shearing can be applied at a specified rate of deformation or at a specified rate of horizontal force change, or at a specified set of force steps of a specified duration. The system is capable of displaying the current status of a test and graphically portraying the progress of the test in real time. The system includes the capability for the operator to alter the test process and conditions at any stage of the test. CAPACITY 2.5, 5, or 10 kN VERTICAL MOTOR Stepper motor with built-in controls for vertical load HORIZONTAL MOTOR Stepper motor with built-in controls for horizontal load SPEED RANGE 0.0001 to 10mm per min. HORIZONTAL TRAVEL +125 mm VERTICAL TRAVEL 12.5 mm Power supply: 220-240 V 1 ph 50 Hz 750 W Dimensions: 228 mm x560 mm x 762 mm Weight: 63 Kg



This section proposes a wide range of laboratory equipment and accessories that cannot be located in a specific application, but they are utilized for general purposes and are suitable to perform properly

different measuring procedures of liquids and solids, weighing, temperature,

containers, still, pH, chemicals, reagents etc.


Page 105


LABORATORY GLASSWARE Ölçülü Silindirler (Measuring cylinders)

cam opak şeffaf Kapasite kapağı ile plastik cam birlikte oluk ağızlı oluk ağızlı

10 ml. IL-V099 IL-V100 IL-V101

25 ml. IL-V099-01 IL-V100-01 IL-V101-01

50 ml. IL-V099-02 IL-V100-02 IL-V101-02

100 ml. IL-V099-03 IL-V100-03 IL-V101-03

250 ml. IL-V099-04 IL-V100-04 IL-V101-04

500 ml. IL-V099-05 IL-V100-05 IL-V101-05

1000 ml. IL-V099-06 IL-V100-06 IL-V101-06

2000 ml. IL-V099-07 IL-V100-07 IL-V101-07

Piknometre Pyknometers, pyrex cam, delikli kapağı ile birlikte Kapasite Ağız 29 mm Geniş Ağızlı 50 mm 250 ml V105-03 =

500 ml V105 V105-04 1000 ml V105-01 V105-05 2000 ml V105-02 V105-06 STANDARD: EN1097-6

500 ml V103

1000 ml V103-01

Beherler Beakers, pyrex cam Balon Joje Volumetric flask, cam, kapağı ile birlikte

Model Kapasite Model Kapasite IL-V104 25 ml. V109 100 ml.

IL-V104-0150 ml. V109-01 250 ml.

IL-V104-02100 ml. V109-02 500 ml.

IL-V104-03250 ml. V109-03 1000 ml.

IL-V104-04600 ml.

IL-V104-051000 ml.

IL-V104-062000 ml.

IL-V104-075000 ml.

Ölçekli Test Şişeleri Graduated impurities test bottles, camDesiccators / Desikatörler,cam Model Kapasite Model Kapasite

IL-S132-01 500 ml IL-A035 200 mm

IL-S132-03 1000 ml IL-A036 250 mm

IL-A036-01 300 mm

Vakum Tip / Vacuum type desicc

Karıştırma Çubuğu / Stirring rod, cam Model Kapasite

IL-V147-01 8X250 mm IL-A039 200 mm

Markalalama Kalemi / Marking Pen IL-A040 250 mm

IL-V147-01 8X250 mm IL-A040-01 300 mm

Dereceli Pipet / Graduated pipettes,soda cam Dereceli Büret / Graduated burettes, soda cam Model KapasiteBölüm Model Kapasite Bölüm

V142 1 ml 0,01 ml V143 1 ml 0,01 ml V142-01 5 ml 0,1 ml V143-01 5 ml 0,1 ml V142-02 10 ml 0,1 ml V143-02 10 ml 0,1 ml V142-03 25 ml 0,1 ml

V142-04 50 ml 0,1 ml V142-05


Page 106


Porcelain, Plastic, Thermometer, Hgrometer Pruducts

Havan ve Tokmak / Mortar and Pestle, porselen Porselen Pota / Evaporating dishes, porselen

Model Çap Derinlik Model Çap IL-V112 100 mm 60 mm IL-V114 60 mm IL-V112-01 125 mm 65 mm IL-V114-01 80 mm IL-V112-02 150 mm 76 mm IL-V114-02 100 mm IL-V112-03 180 mm 92 mm IL-V114-03 120 mm IL-V112-04 200 mm 100 mm IL-V114-04 160 mm

IL-V114-05 210mm IL-V113 Rubber heated pestle IL-V114-06 245 mm

Porselen Kroze / Pocelain Crucible Piset / Wash bottles,plastik

Model Kapasite Model Kapsite IL-V117 30 ml IL-V120 100 ml. IL-V117-01 30 ml için kapak IL-V120-01 250 ml. IL-V117-02 50 ml IL-V120-02 500 ml. IL-V117-03 50 ml için kapak IL-V120-03 1000 ml. IL-V117-04 Platiyum kroze 25 ml IL-V140 Buchner hunisi

Huni / Funnels,plastik Kova-Bidon / Bucket-Bottles,plastik Numune Torbası / Sam

Model Kapsite Model Kapsite Model IL-V135 100 mm IL-V128 9 lt IL-V135 IL-V135-01 140 mm IL-V128-01 12 lt IL-V135-01 IL-V135-02 210mm IL-V128-02 15 lt

IL-V121 5 lt Dijital Termometre / Digital Thermometers Model Isı Aralığı Hassasiyet Çözünürlük Prop Uzunluk IL-V150 -50 +150 ºC 1 0.1 265 mm IL-V151 -50 +300 ºC 1 0.1 133 mm IL-V152 -50 +300 ºC 1 0.1 1 mt harici

Cam Termometre / Glass Thermometer Metal Termometre / Bimetal Thermometer Model Isı Aralığı Bölüntü Model Isı Aralığı Bölüntü IL-V164-01 -10+ 100 °C 1 °C IL-V160 -40 +40 °C 5 °C, 250 mm IL-V164-02 -10 + 200°C 1 °C IL-V160-01 0+ 250 °C 5 °C, 250 mm IL-V164-03 -10 + 300°C 1 °C IL-V160-02 0+ 250 °C 5 °C, 600 mm Max./Min. Termometre / Max./Min Thermometer Korumalı Termometre / Armoured Thermometer IL-V163 8X250 mm IL-V162 0 ÷ 200 °C, 2 °C

Higrometre / Hair hygrometer Toprak Hidrometresi / Soil hygrometer IL-V169 0 to 100% Model Isı Aralığı

IL-V172 0,995-1,038 g/ml, 0,001-151 H

IL-V172-02 -5 + 60 g/litre - 152 H

IL-V172-03 0,995 - 1,030 g/ml - BS 1377

IL-V172-04 1,000 to 1,200 g/ml

IL-V172-05 1200 to 1300 g/ml EN 1367-2



Metal Containers and Tools

Numuen Kapları / Sample Containers

Model Çap mm Malzeme IL-V122 55x36 alüminyum

IL-V122-01 55x65 alüminyum

IL-V122-02 75x50 alüminyum

IL-V122-05 55x35 prinç

IL-V122-06 70x45 prinç

Numune Kapları / Tins Numune Tepsileri / Trays, Paslanmaz Çelik

Model Kapasite lt Model Ebat cm IL-V125 1.5 IL-V182-14 21x32x5

IL-V125-01 1 IL-V182-15 25x37x5

IL-V125-02 3 IL-V182-16 27x45x5

IL-V125-03 5

IL-V125-04 10

Bakkal Kürekleri / Scoops, Çelik Spatula / Spatulas

Model Ölçü mm Kapasite ml Model Bıçak mm

IL-V183 245x80 325 IL-V192 100

IL-V184 260x90 500 IL-V192-01 150

IL-V184-01 335x120 1000 IL-V192-02 200

IL-V184-02 380x145 1550 IL-V192-03 300

IL-V184-03 420x160 2600

Fıçalar / Brushes Eldivenler / Gloves

Model Açıklama Model Açıklama

IL-V178 Yumuşak Fırça, Elek için / Soft Brush V177 Yanmaz Eldiven / Heat Re

IL-V178-01 İnce Telli fırça / FINE WIRE BRUSH V177-01 Lastik eldiven /Neoprene

IL-V178-03 Şişe Fırça / BOTTLE BRUSH

IL-V179 BRISTLE, round, 35 mm. dia. soft hair

IL-V179-01 Kıl Fırça, BRISTLE, yassı

IL-V179-02 Elek Fırçası, SIEVE BRUSH, çift taraflı, naylon

IL-V179-03 Elek Fırçası, SIEVE BRUSH, çift taraflı, sert naylon

IL-V179-04 Elek Fırçası, SIEVE BRUSH, çift taraflı, ince prinç

IL-V179-05 Yumuşak Saç Fırçası /SOFT HAIR BRUSH

IL-V179-06 Kalın sert fırça / BRISTLE, yatay, naylon Alet Edavatlar / Tools

Model Açıklama Alet Edavatlar / Tools IL-V193 Çelik Çekiç Steel Hammer, 300 g

IL-V194 Çelik Çekiç Steel Hammer, 1000 g Model Açıklama IL-V195 Lastik Tokmak / Rubber Mallet IL-V186 Numune Kaşığı / SAMPLING SPOON

IL-V196 Kürek / Shovel IL-V186-01 Kepçe / Ladle

IL-V197 Kazma / Pick Mattock IL-V187 Dikdörtgen Mala / Rectangulartrowel

IL-V198 Murç / Density Chisel IL-V188 Mala / Trowel

IL-V199 Yoğunluk Kazması / Density Pick IL-V189 Mala / Trowel


Page 108


This European Standard (EN 12691:2006) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2006, and conflicting national standards shall be withdrawn at the latest by September 2006. This European Standard supersedes EN 12691:2001. In order to receive more precise test results a revision of the test procedure was necessary. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Page 109


COLD BENDING TEST MACHINE Product Code::İ/Y-001 Standards: EN 1109

Determination of resistance to impact Product Code::İ/Y-001 Standards: EN 12691

Device (20 ± 0.1) mm in diameter fixed two cylinder and movable upwardly between these two cylinders, (30 ± 0.1) mm diameter, cylinder or semicylindrical comprises twisting mandrel. Between rollers set a uzakluk. away from the bending mandrel of the plate cylinder and can be set according to the thickness

All of the equipment, + 20 ° and?? 40 ° C between 0.5 ° C can be controlled precisely thermostatted sõcaklõğõ bathroom. The cooling fluid used can be one of the following mixture: Çözeltisi2/s monopropylene glycol (volume ratio = 1/1) -25 ° C?? For up to sõcaklõk Ethanol / water mixture (volume aspect ratio = 1/1) -20 ° C?? From low temperatures for

The test specimen is struck on the top surface of the sheet by a free falling drop mass with a puncturing tool. The test specimen is lying on a hard support (method A) and if required additionally on a soft support (method B). After the impact the test specimen is tested for leakage. The testing is performed using a test apparatus, which enables vertically falling of the drop mass and consists of the parts indicated in 5.1 to 5.7 and can be used with a hard support (method A) or a soft support (method B). The stand can be constructed for free falling of the drop mass or optionally for rail guided falling and should be at least as long (high) as the maximum drop height to be tested (for most practical purposes 2 m will be sufficient). Ballast ring in steel with mass of at least 2 000 g with inner diameter of approximately 100 mm



WATER PEMEABILTY TESTER Product Code::İ/Y-003 Standards: EN 1928

METHOD A 150 mm in diameter made of aluminum metal cells. Manual pressure pump. Glass plates <5mm to 10 kPa. <8mm to 60 kPa. Digital pressure sensor and indicator 0-103 kPa. Size 400X380X350 Weight about 20 kg

METHOD B Menbrane bituminous waterproofing menbrane those of this device and the water permeability at high pressure is used in testing. The pressure regulator on the device, and controlled and monitored by the pressure gauge. pressure chamber complete with sample HANDLE. dimensions 350x350x300 mm Weight: 15 kg

VACUMM TESTER Product Code::İ/Y-005 Standards: EN 112691,EN 12730

The vacuum chamber is 120 mm in diameter made from brass material. Plasty over 100 mm transparent glass material of the cell and below 20 mm in diameter glass tube materials are plasty. Digital vacuum gauge sensor and measuring range 0-103 kPa Vacuum pump rate of 3 m3. Vacuuming capacity of 150 millibars. Engine power 0.10 kW Digital time relay 599.9 seconds 99:59 h to 99:59 minutes. Size 200x220x250 mm. Weight about 15 kg


Page 111


STATIC LOAD DEVICE Product Code::İ/Y-006 Standards: EN 12730

To apply the vertical load is applied on the sample On the load on the sample from the installation disk is set to 40 mm. Loading bar and punching balls 2 was calibrated in kilograms. The installation disk 1 to 3 kg, 5 kg given as 3. Punching ball 10 mm in diameter and hardness is 50 HRC. Polystyrene 50X500X500 mm dimensions method (A) is applied. Concrete plates 300X300X30 mm in size method (B) is applied for. Size 700X700X550 mm. Weight about 50 kg

ADHESION TESTER FOR BITUMEN MENBRANE Product Code::İ/Y-007 Standards: EN 12039

This tester who menbrane Bituminous insulation material used to take a test on adhesion of abrasive. Load of 25 Newtons applied on the test sample indicated to standatdt 6.6 4000 mm square area in the quality of the polyamide through the brush 55 is applied again as a result. The degree of adhesion of the test sample of 0.01 grams of pre and post-test weights were the results of weighing with a balance has a sensitivity. The device can be set on a counter in the indicator, door safety sensor and is complete with on-off button. Power: 220 volts, 50 Hz 1 hp. Dimensions: 850x300x300mm Weight: 45 kg

SAMPLE CUTTING MACHINE Product Code::İ/Y-008 Standards:

These devices, plastics, rubber, and bituminous materials menbrane flat and circular-shaped spoon is designed to prepare samples. The device has an operating pressure of 5 bar from about 3 to 5 tons of cargo can be applied. systems and air compressors for air and mold must be ordered separately.



İDİLLAB MAK. SAN. İTH. İHR. TİC. VE. LTD. ŞTİ.


Page 113

Documents

İDİLLAB MATERIAL TESTING EQUIPMENT COMPANYcannesbiotech.com/wp-content/uploads/2018/03/CATALOGUE-Katalog.pdf · EN 933-1, 933-2 - UNI 2331, 2333 - UNE 7050 All Sieves are made with