Embed Size (px)
Citation preview
Carling Technologies, Inc.60 Johnson Avenue, Plainville, CT 06062Email: [email protected] Support: [email protected]: 860.793.9281 Fax: 860.793.9231
www.carlingtech.com
BD-SERIESBD-Series BATTERY DISCONNECT POWER SWITCHCarling Technologies BD-Series battery disconnect switch is designed to minimize battery drain, ensure maintenance personnel safety, and when used in conjunction with a padlock, provide vehicle theft protection.
Product Highlights: � 100-250 Amps � 12VDC/24VDC � IP67 Sealing Protection � Lock Compatible
Typical Applications: � On/Off-Highway Equipment � Military � Marine
Download 3D CAD Files
Resources:
Watch Product Video
IGS STP
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
2 | BD-Series Battery Power Switch - Design Features
LOCK COMPATIBLE
ROTARY KNOB
BD-Series DESIGN FEATURES
SHAFT SEALS BODY SEAL
STUD SLIDING CONTACT
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
| 3 BD-Series Battery Power Switch - General Specifications
*Manufacturer reserves the right to change product specification without prior notice.
Mechanical
Physical
Application Voltage DC Rated voltage: 12VDC / 24VDC Range of operating voltage: 12VDC: min 9VDC, max 16VDC; 24VDC: min 18VDC, max 32VDC
Current Ratings 12VDC/24VDC: rated 100A, max 250A Intermittent Current 1500A: 3 seconds on, 60 seconds off @24VDC,1500A, repeated 10 times, voltage drop should not be more than 400mV between main terminals.
Dielectric Strength 50HZ, 550VAC for 1 minute between electrically / isolated terminals in main circuit; between terminals of main circuit, knob and enclosure.
Insulation Resistance Minimum of 100 Megohms 1 min @ 500VDC
Temperature rise Terminal should not exceed 60°C above ambient.
Endurance 2 seconds ON and 2 seconds OFF per operation, load with rated current & voltage. 12V test @14V±0.1V; 24V test @28V±0.2V. 50,000 cycles: 100A current; 20,000 cycles: 200A current; 3,000 cycles: 250A current.
Operating Temp. -40 ºC to +85 ºC.
Moisture Resistance IEC 60068-2-38 or G/T 2423.34, Test Z/AD: Composite temperature/humidity cyclic test, ten 24-hour cycles @ -10ºC to+65ºC,≤80-96%RH.
Thermal Cycling IEC 60068-2-14 or GB/T 2423.22, Test Nb,25Cycles-40˚Cto+85˚C
Thermal Shock IEC 60068-2-14 or GB/T 2423.22, Test Na (Five cycles @ -55ºC to +25ºC to +85ºC to +25ºC)
Cold/Heat Resistance IEC 60068-2-1 or GB/T 2423.1 Cold: Test A, work 8 hours @ -40°C IEC 60068-2-2 or GB/T 2423.2 Heat: Test B, work 8 hours @ +85°C
Vibration IEC 60068-2-34 or GB/ T2423.11,10~500Hz, Random vibration test for 8 hours in each of the 3 mutually perpendicular axes. 25Gs @ Z axes, 12.5Gs @ X/Y axes. powered.
Salt Spray IEC 60068-2-11 or GB/T 2423.17, 48 hrs.
Fire and Smoke IEC 60695-11-10 or GB/T 2408, HB
Dust/Waterproof IEC 60529 or GB4208, IP 67
Chemical Splash Gasoline, Diesel, Motor Oil, Brake Fluid, Ammonia, Armor All
UV Protection ASTM G155-05a, cycle 11, 300 hr Xenon Arc, 1.4W/(m2·nm ), wavelength 420 nm.
Number of Poles 1 pole
Wiring Terminals Line/Load terminal: M10 brass nuts Torque value: (6~8 Nm)
Mounting M8 Iron nut, torque value: 10-15 Nm.
Torque Operation 1.0~3.0 Nm
Body Color Black
Actuator Color Red handle, with white color “Arrow” legends.
Weight 340g
Material Base (PBT glass enforced), Bracket & Knob (nylon glass enforced), Studs (Copper + Tin plating), Nuts (Brass)
Free drop No damage after 3 drops from 1000 mm height
Endurance More than 100,000 cycles without load
Electrical
Environmental
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
4 | BD-Series Battery Power Switch - Ordering Scheme & Dimensional Specifications
Dimensional Specifications: in. [mm]
1Series
2Rating
3Termination
4Knob Color
5Legend
BD 10 R AA
1 SERIESBD Battery Disconnect Power Switch
4 KNOB COLORR Red
5 LEGENDA Arrow Legend, White Color
2 RATING / OPERATION CYCLEA 100A @ 24VDC: 50,000 Operation 200A @ 24VDC: 20,000 Operation 250A @ 24VDC: 3,000 Operation
Note:RefertoEnduranceSpecificationsfortestparameters.
3 TERMINATION10 M10 Stud
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
| 5 BD-Series Battery Power Switch - Mounting Method 1
Mounting Method 1: in. [mm]
Notes:1 Switch can be mounted horizontally or vertically.
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
6 | BD-Series Battery Power Switch - Mounting Method 2
Mounting Method 2: in. [mm]
Notes:1 Switch can be mounted horizontally or vertically.
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
| 7
Wiring: in. [mm]
BD-Series Battery Power Switch - Wiring
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
8 | Notes
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
| 9 Reps & Contact
TEMCO NorthwestHanna Lind Ltd.
Sierra NetSales Norris
PacentTSI North
TSI
DM AssocEastDy-tronix Inc.
Sunbelt ComponentsPinnacle Marketing
Omega LimitedBridge Marketing
Alaska, H
awaii
MateraW. Canada
LuscombeEngineering
SignalEnterprises
MateraE. Canada
DMMichigan
DM MexicoMexico
MatrixSouth America
DMAssoc
MelodyEmery
ProRepSolutions
Authorized Sales Representatives
About Carling
Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile.
To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications
Click on the group name on the map below to find your local representative or visit www.carlingtech.com/findarep.
«
«
«««
MIDWEST
NORTHERN
SOUTHEAST
LATIN AMERICA
WEST
Canada
Mexico
South America
Europe
Middle East
Africa
Asia-PacificOceania
Worldwide HeadquartersCarling Technologies, Inc.60 Johnson Avenue, Plainville, CT 06062Phone: 860.793.9281 Fax: 860.793.9231Email: [email protected]
Northern Region Sales Office: [email protected] Region Sales Office: [email protected] Region Sales Office: [email protected] Region Sales Office: [email protected] America Sales Office: [email protected]
Asia-Pacific HeadquartersCarling Technologies, Asia-Pacific Ltd.,Suite 1607, 16/F Tower 2, The Gateway,Harbour City, 25 Canton Road,Tsimshatsui, Kowloon, Hong KongPhone: Int + 852-2737-2277 Fax: Int + 852-2736-9332Email: [email protected]
Shenzhen, China: [email protected], China: [email protected], India: [email protected], Taiwan: [email protected], Japan: [email protected]
Europe | Middle East | Africa HeadquartersCarling Technologies LTD4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UKPhone: Int + 44 1392.364422 Fax: Int + 44 1392.364477Email: [email protected]
Germany: [email protected]: [email protected]
www.carlingtech.com REV_09_2016
