III YEAR I SEM - manabadi.co.inmanabadi.co.in/Timetables/JNTUH-BTech-III-Year-I-Sem-R05...III YEAR B.TECH - I SEMESTER – R07 REGULATION (R07) SUPPLEMENTARY EXAMINATIONS, MAY / JUNE.,

III YEAR B.TECH. I SEMESTER (R07)

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD

KUKATPALLY - HYDERABAD – 500 085 E X A M I N A T I O N B R A N C H

III YEAR B.TECH - I SEMESTER – R07 REGULATION (R07) SUPPLEMENTARY EXAMINATIONS, MAY / JUNE., 2012

T I M E T A B L E

T I M E - 10-00 AM TO 01.00 PM

BRANCH

DATE & DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

CIVIL ENGINEERING

(01-C E)

MANAGERIAL ECONOMICS AND

FINANCIAL ANALYSIS COM. TO

CE,ME,ECE,ETM,MMT,E.COMP.E,

MEP, ICE, BT AME

DESIGN OF

REINFORCED

CONCRETE STRUCTURES

CONCRETE

TECHNOLOGY

WATER RESOURCES

ENGINEERING-I

STRUCTURAL

ANALYSIS-II ENGINEERING GEOLOGY

ELECTRICAL AND

ELECTRONICS

ENGINEERING (02-E E E)

COMPUTER SYSTEM

ORGANIZATION

ELECTRICAL

MEASUREMENTS POWER SYSTEMS-II

POWER

ELECTRONICS

COM TO EEE, E.CONT.E

ELECTRICAL

MACHINES-III LINEAR SYSTEMS ANALYSIS

MECHANICAL

ENGINEERING

(03-M E)


FINANCIAL ANALYSIS

COM. TO CE,ME,ECE,ETM,MMT,E.COMP.E,

MEP, ICE, BT AME

AUTOMOBILE

ENGINEERING

DYNAMICS OF MACHINERY

COM TO ME, MEP,

AME

MACHINE TOOLS

COM. TO ME, MECT

DESIGN OF MACHINE

MEMBERS-I COM TO ME, MEP

HEAT TRANSFER

COM TO ME, MEP, AME

ELECTRONICS AND

COMMUNICATIONS ENGINEERING

(04-E C E)

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

COM. TO

CE,ME,ECE,ETM,MMT,E.COMP.E, MEP, ICE, BT AME

DIGITAL IC APPLICATIONS

LINEAR IC APPLICATIONS

COMPUTER

ORGANIZATION COM TO ECE,

EIE, ETM

ANTENNAS AND

WAVE PROPAGATION

COM. TO ECE, ETM

DIGITAL COMMUNICATIONS COM. TO ECE, ETM

COMPUTER

SCIENCE AND ENGINEERING

(05-C S E)

FORMAL LANGUAGES AND AUTOMATA THEORY

SOFTWARE

TESTING METHODOLOGIES

COM TO CSE, IT

COMPUTER

GRAPHICS COM TO CSE, IT,

CSSE, E.COMP.E

MICRO

PROCESSORS

AND INTERFACING

COM TO CSE, IT,

E.COMP.E ,ICE

DATA

COMMUNICATION SYSTEMS

COM TO CSE, IT

DESIGN AND ANALYSIS OF ALGORITHMS

CHEMICAL ENGINEERING

(08-C H E M)

DATA BASE MANAGEMENT SYSTEMS

COM TO CHEM, MECT

MATERIAL

SCIENCE FOR

CHEMICAL ENGINEERS

CHEMICAL

ENGINEERING

THERMODYNAMICS-II

CHEMICAL REACTION

ENGINEERING-1

MASS TRANSFER

OPERATIONS-I PROCESS INSTRUMENTATION

ELECTRONICS AND

INSTRUMENTATION ENGINEERING

(10-E I E)

MANAGEMENT SCIENCE COM TO EIE, AE

ELECTRONIC

CIRCUIT

ANALYSIS

CONTROL SYSTEMS COM TO EIE, AE

COMPUTER

ORGANIZATION COM TO ECE,

EIE, ETM

INDUSTRIAL INSTRUMENTATION

PROCESS CONTROL

INSTRUMENTATION

COM TO EIE, ICE

BIO-MEDICAL

ENGINEERING (11-B M E)

HOSPITAL SYSTEM MANAGEMENT

LINEAR AND


COM. TO BME,

E.CONT..E, ETM, E.COMP.E

BIOMEDICAL

EQUIPMENT

BASIC CLINICAL

SCIENCES-II

BIOFLUIDS AND

MECHANICS

DIGITAL SIGNAL PROCESSING

COM. TO BME, E.COMP.E

CONTINUED ON PAGE – 2

III YEAR B.TECH. I SEMESTER (R07) PAGE – 2

BRANCH

DATE , TIME & DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

INFORMATION

TECHNOLOGY

(12- I T)

AUTOMATA & COMPILER

DESIGN

COM. TO IT, CSSE

SOFTWARE TESTING

METHODOLOGIES

COM TO CSE, IT

COMPUTER

GRAPHICS COM TO CSE, IT,

CSSE, E.COMP.E

MICRO PROCESSORS AND

INTERFACING

COM TO CSE, IT, E.COMP.E ,ICE

DATA

COMMUNICATION SYSTEMS

COM TO CSE, IT

DISTRIBUTED DATABASES

ELECTRONICS &

CONTROL ENGINEERING

(13-E Con. E)

COMPUTER ORGANIZATION

LINEAR AND DIGITAL

IC APPLICATIONS Com. to BME, E.CONT..E,

ETM, E.COMP.E

PRIME MOVERS

AND MECHANICAL

COMPONENTS

POWER

ELECTRONICS Com to EEE,

E.CONT.E

PRINCIPLES OF COMMUNICATIONS

PROCESS CONTROL

MECHANICAL

ENGINEERING (MECHATRONICS)

(14-MCT)

DATA BASE MANAGEMENT

SYSTEMS

Com to CHEM, MECT

INDUSTRIAL MANAGEMENT

FINITE ELEMENT METHODS

MACHINE TOOLS Com. to ME, MECT

SWITCHING

THEORY AND

LOGIC DESIGN

KINEMATICS OF MACHINERY

COMPUTER SCIENCE AND

SYSTEMS

ENGINEERING (15-C S S)

AUTOMATA & COMPILER

DESIGN

COM. TO IT, CSSE

OPTIMIZATION TECHNIQUES

COMPUTER

GRAPHICS Com to CSE, IT,

CSSE, E.Comp.E

SYSTEMS PROGRAMMING

OPERATING

SYSTEMS Com to CSSE,

E.Comp.E

UNIX PROGRAMMING

ELECTRONICS AND

TELEMATICS ENGINEERING

(17-E T M)

MANAGERIAL ECONOMICS

AND FINANCIAL ANALYSIS Com. to


MEP, ICE, BT AME

LINEAR AND DIGITAL

IC APPLICATIONS COM. TO BME,

E.CONT..E, ETM,

E.COMP.E

BASIC OF

TELEMATICS


Com to ECE, EIE,

ETM

ANTENNAS AND

WAVE

PROPAGATION Com. to ECE, ETM

DIGITAL COMMUNICATIONS

Com. to ECE, ETM

METALLURGY AND

MATERIAL TECHNLOGY

(18-M M T)


Com. to


WELDING

TECHNOLOGY

COM TO MMT, MEP

MECHANICAL METALLURGY

HEAT TREATMENT TECHNOLOGY

PROBABILITY & STATISTICS

IRON PRODUCTION

ELECTRONICS AND

COMPUTER

ENGINEERING (19-E C C)


AND FINANCIAL ANALYSIS Com. to


MEP, ICE, BT AME

LINEAR AND DIGITAL

IC APPLICATIONS COM. TO BME,

E.CONT..E,ETM,

E.COMP.E

COMPUTER

GRAPHICS

Com to CSE, IT, CSSE, E.Comp.E

MICRO

PROCESSORS AND INTERFACING

Com to CSE, IT,

E.COMP.E ,ICE

OPERATING

SYSTEMS

Com to CSSE, E.Comp.E


COM. TO BME, E.COMP.E

MECHANICAL ENGINEERING

(PRODUCTION)

(20-M E P)


Com. to


WELDING

TECHNOLOGY

COM TO MMT, MEP

DYNAMICS OF

MACHINERY Com to ME, MEP,

AME

POWER PLANT

AND TURBO

MACHINERY

DESIGN OF

MACHINE MEMBERS-I

Com to ME, MEP

HEAT TRANSFER Com to ME, MEP, AME

AERONAUTICAL

ENGINEERING (21-A E)

MANAGEMENT SCIENCE

Com to EIE, AE FLIGHT MECHANICS-I

CONTROL

SYSTEMS COM TO EIE, AE

AEROSPACE

VEHICLES STRUCTURES -I

AEROSPACE

PROPULSION-I AERODYNAMICS-II

INSTRUMENTATION AND CONTROL

ENGINEERING (22-I C E)


AND FINANCIAL ANALYSIS

Com. to CE,ME,ECE,ETM,MMT,E.COMP.E,

MEP, ICE, BT AME

ENVIRONMENTAL

STUDIES

INDUSTRIAL

ELECTRONICS

MICRO

PROCESSORS AND

INTERFACING Com to CSE, IT,

E.COMP.E ,ICE

OBJECT ORIENTED

PROGRAMMING

PROCESS CONTROL

INSTRUMENTATION Com to EIE, ICE



PAGE – 3

BRANCH

DATE , TIME & DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

BIOTECHNOLOGY

(23-B O T)



Com. to CE,ME,ECE,ETM,MMT,E.COMP.E,

MEP, ICE, BT AME

TRANSPORT

PHENOMENA IN BIOPROCESSES

BIOCHEMICAL

REACTION ENGINEERING-I

BASIC INDUSTRIAL AND

ENVIRONMENTAL

BIOTECHNOLOGY

GENETIC

ENGINEERING PLANT BIOTECHNOLOGY

AUTOMOBILE

ENGG.

(24 – AME)


Com. to


FLUID MACHINES

AND HYDRAULIC

MACHINERY

DYNAMICS OF

MACHINERY

Com to ME, MEP, AME

DESIGN OF

MACHINE

ELEMENTS

THERMAL ENGINEERING - II

HEAT TRANSFER Com to ME, MEP, AME

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF R07 REGULATIONS

DATE OF EXAMINATION: 19-05-12(SATURDAY) TIME OF EXAMIANTION: 10.00 AM TO 01.00 PM

BRANCH

THE SUBJECT(S) OF R07 REGULATIONS, ALREADY

STUDIED BY THE RE-ADMITTED STUDENTS OF R05

REGULATIONS

SUBSTITUTE SUBJECT(S) FOR THE RE-ADMITTED

STUDENTS OF R05 REGULATIONS

CIVIL ENGINEERING (01 – CE) Managerial Economics & Financial Analysis Electrical & Electronics Engineering 07A3EC01�II YR. I SEM. R07

ELECTRONICS & COMMUNICATION ENGINEERING

(04 – ECE) Managerial Economics & Financial Analysis

Environmental Studies

07A3EC11�II YR I SEM R07

Objective Oriented Programme 07A4EC08 �II YR II SEM R07

COMPUTER SCIENCE ENGINEERING (05 – CSE) Design Analysis of Algorithms

Principles of Programming Languages

07A40501 �II YR II SEM R07

Managerial Economics & Financial Analysis 07A3HS01�II YR I SEM R07

CHEMICAL ENGINEERING (08-CHEM) Material Science for Chemical Engineers Mechanical Unit Operations

07A40803�II YR II SEM R07

ELECTRONICS AND INSTRUMENTATION ENGINEERING (10-E I E)

Control Systems Digital IC Applications


INFORMATION TECHNOLOGY (12- I T) Computer Graphics


07A40501 �II YR II SEM R07

Managerial Economics & Financial Analysis 07A3HS01�II YR I SEM R07

METALLURGY AND MATERIAL TECHNLOGY

(18-M M T) Managerial Economics & Financial Analysis

Basic Electronics


INSTRUMENTATION AND CONTROL ENGINEERING (22-I C E)

Managerial Economics & Financial Analysis Computer Organization

07A4EC13�II YR II SEM R07


III YEAR B.TECH. I SEMESTER (R07) PAGE – 4


DATE OF EXAMINATION: 19-05-12(SATURDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM

BRANCH


STUDIED BY THE RE-ADMITTED STUDENTS OF R05

REGULATIONS


STUDENTS OF R05 REGULATIONS

COMPUTER SCIENCE ENGINEERING

(05 – CSE) Microprocessor & Interfacing

Unix & Shell Programming

07A3EC17 �II YR I SEM R07

INFORMATION TECHNOLOGY

(12- I T) Microprocessor & Interfacing

Unix & Shell Programming

07A3EC17 �II YR I SEM R07

NOTE:

i. ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY. ii. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL.

iii. THE PRINCIPALS ARE REQUESTED TO INFORM THE UNIVERSITY ANY OTHER SUBSTITUTE SUBJECTS THAT ARE NOT INCLUED IN THE ABOVE LIST IMMEDIATELY.

Sd/-xxxxx

DATE: 28-03-12 CONTROLLER OF EXAMINATIONS


JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD KUKATPALLY - HYDERABAD – 500 085

E X A M I N A T I O N B R A N C H

III YEAR B.TECH - I SEMESTER– R05 REGULATION (R05)- SUPPLEMENTARY EXAMINATIONS, MAY / JUNE, 2012

T I M E T A B L E T I M E - 10-00 AM TO 01.00 PM

BRANCH

DATE AND DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

CIVIL ENGINEERING

(01-C E)

Electrical & Electronics

Engineering

Basic Reinforced Concrete

Design & Drawing Concrete Technology

Water Resources

Engineering Structural Analysis-II Engineering Geology

ELECTRICAL AND ELECTRONICS

ENGINEERING

(02-E E E)

Computer Organization

Com. to EEE, ECE, EIE, E.CON.E, ETM

Electrical Measurements

Power Systems-II Electrical Machines-III

Linear & Discrete Systems

Analysis Power Electronics

MECHANICAL

ENGINEERING

(03-M E)

Hydraulic Machinery &

Systems Com. to ME, AME

MEFA Com. to ME, ECE, CSE,

IT, ETM, CSS, ECC,

MEP, ICE, AME

Production Technology

Com. to ME, MCT, AME

Kinematics of Machinery

Com. to ME, MEP, MCT, AME

Design of Machine

Members –I Com. to ME, MEP

Thermal Engineering-II

Com. to ME, AME

ELECTRONICS AND

COMMUNICATIONS

ENGINEERING (04-E C E)

Computer Organization Com. to EEE, ECE, EIE,

E.CON.E, ETM

MEFA

Com. to ME, ECE, CSE,

IT, ETM, CSS, ECC, MEP, ICE, AME

Linear IC Applications Antennas And Wave

Propagation

Com. to ECE, ETM

Digital IC Applications

Com. to ECE, EIE

Digital Communication

Com. to ECE, ETM

COMPUTER SCIENCE

AND ENGINEERING

(05-C S E)

Formal Languages & Automata Theory

MEFA

Com. to ME, ECE, CSE, IT, ETM, CSS, ECC, MEP,

ICE, AME

Object Oriented Analysis

And Design

Com. to CSE, IT, CSS

Operating Systems

Com. to CSE, IT, EIE,

E.CON.E, CSS, ECC

Computer Networks Com. to CSE, IT


CHEMICAL

ENGINEERING (08-C H E M)

Energy Engineering Mechanical Unit

Operations

Chemical Engineering

Thermodynamics-II Mass Transfer Operations-I

Chemical Reaction

Engineering-I Process Instrumentation

ELECTRONICS AND

INSTRUMENTATION ENGINEERING

(10-E I E)


Com. to EEE, ECE, EIE,

E.CON.E, ETM

Management Science Com. to EIE, MMT

Industrial Instrumentation

Operating Systems


E.CON.E, CSS, ECC

Digital IC Applications Com. to ECE, EIE

Process Control

Instrumentation

Com. to EIE, ICE

BIO-MEDICAL

ENGINEERING

(11-B M E)

Digital Signal Processing Com. to BME, ECC

Hospital System Management

Linear And Digital IC

Applications Com. to BME, E.CON.E

ECC ETM

Basic Clinical Sciences–II Bio Fluids And Mechanics Bio Medical Equipment

INFORMATION

TECHNOLOGY (12- I T)

Automata & Compiler

Design Com. to IT, CSS


IT, ETM, CSS, ECC,

MEP, ICE, AME


And Design Com. to CSE, IT, CSS

Operating Systems

Com. to CSE, IT, EIE, E.CON.E, CSS, ECC

Computer Networks

Com. to CSE, IT Web Technologies



PAGE – 2

BRANCH

DATE AND DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

ELECTRONICS &

CONTROL ENGINEERING

(13-E Con. E)


Com. to EEE, ECE, EIE,

E.CON.E, ETM,

Principles of Communications

Linear And Digital IC

Applications Com. to BME, E.CON.E

ECC ETM

Operating Systems


E.CON.E, CSS, ECC

Operations Research Process Control


(MECHATRONICS)

(14-MCT)

Industrial Management Finite Element Methods Production Technology




Switching Theory and

Logic Design Machine Tools

COMPUTER SCIENCE AND SYSTEMS

ENGINEERING

(15-C S S)

Automata & Compiler

Design Com. to IT, CSS


IT, ETM, CSS, ECC,

MEP, ICE, AME


And Design Com. to CSE, IT, CSS

Operating Systems


Optimization Techniques Unix Programming

ELECTRONICS AND

TELEMATICS

ENGINEERING (17-E T M)


Com. to EEE, ECE, EIE, E.CON.E, ETM


IT, ETM, CSS, ECC,

MEP, ICE, AME

Linear And Digital IC Applications

Com. to BME, E.CON.E

ECC ETM

Antennas And Wave

Propagation Com. to ECE, ETM

Basics of Telematics Digital Communication

Com. to ECE, ETM

METALLURGY AND

MATERIAL TECHNLOGY

(18-M M T)

Electrical Engineering Management Science Com. to EIE, MMT

Mechanical Metallurgy Heat Treatment Technology Iron Making Welding Metallurgy

ELECTRONICS AND COMPUTER

ENGINEERING

(19-E C C)

Digital Signal Processing

Com. to BME, ECC


IT, ETM, CSS, ECC,

MEP, ICE, AME

Linear And Digital IC Applications

Com. to BME, E.CON.E

ECC ETM

Operating Systems


Microprocessors &

Interfacing Com. to E.CC, ICE

Computer Graphics

MECHANICAL

ENGINEERING

(PRODUCTION) (20-M E P)

Instrumentation & Control

Systems


IT, ETM, CSS, ECC,

MEP, ICE, AME

Power Plant & Turbo

Machinery



Design of Machine

Members –I Com. to ME, MEP

Metrology & Quality

Control

AERONAUTICAL


Aircraft Production

Technology Flight Mechanics-I Aerodynamics-II

Aerospace Vehicle

Structures-I Aerospace Propulsion-I Control Systems

INSTRUMENTATION

AND CONTROL ENGINEERING

(22-I C E)

Environmental Studies

MEFA

Com. to ME, ECE, CSE, IT, ETM, CSS, ECC,

MEP, ICE, AME

Industrial Electronics OOP’s Through Java

Microprocessors &

Interfacing

Com. to ECC, ICE

Process Control

Instrumentation

Com. to EIE, ICE



PAGE – 3

BRANCH

DATE AND DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

BIOTECHNOLOGY

(23-B O T)

Biochemical Reaction

Engineering

Basic Industrial

Biotechnology

Environmental

Biotechnology Genetic Engineering

Mass Transfer &

Separation Plant Biotechnology

AUTOMOBILE ENGG.

(24 – AME)

Hydraulic Machinery & Systems

Com. to ME, AME

MEFA

Com. to ME, ECE, CSE,

IT, ETM, CSS, ECC, MEP, ICE, AME

Production Technology


Kinematics of Machinery Com. to ME, MEP, MCT,

AME

Design of Machine

Elements

Thermal Engineering-II

Com. to ME, AME



BRANCH


STUDIED BY THE RE-ADMITTED STUDENTS OF RR

REGULATIONS


STUDENTS OF RR REGULATIONS

CIVIL ENGINEERING (01 – CE)

EE 05187 ELECTRICAL & ELCTRONICS ENGG.

ENVIRONMENTAL STUDIES CE 05239�II YEAR II SEM R05

ELECTRICAL AND ELECTRONICS ENGINEERING

(02 - EEE)

EE05343

LINEAR DISCRETE SYSTEMS ANALYSIS

ENVIRONMENTAL STUDIES

CE 05239�II YEAR II SEM R05

ELECTRONICS & COMMUNICATION ENGINEERING (04 – ECE)

HS 05353 MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS

ENVIRONMENTAL STUDIES CE 05239�II YEAR I SEM R05

COMPUTER SCIENCE ENGINEERING (05 – CSE) HS 05353

MANAGERIAL ECONOMICS & FINANCIAL ANALYSIS




(12 – IT)

HS 05353




IT2224�II YEAR II SEM RR

COMPUTER SCIENCE AND SYSTEMS ENGINEERING (15 - CSS)



ELECTRONICS AND TELEMATICS ENGINEERING

(17 - ETM)

HS 05353



CE 05239�II YEAR I SEM R05

METALLURGY AND MATERIAL TECHNOLOGY (18 - MMT)

EE 05192 ELCTRICAL ENGINEERING


ELECTRONICS AND COMPUTER ENGINEERING

(19 - ECC)

HS 05353



CE 05239�II YEAR I SEM R05

MECHANICAL (PRODUCTION) ENGINEERING (20 –MEP)

EE 05323

INSTRUMENTATION & CONTROL SYSTEMS




INDUSTRI INSTRUMENTAION EI 05309�II YEAR II SEM R05

BT 05071

BASIC INDUSTRIAL BITO TECHNOLOGY





PAGE : 4



BRANCH



REGULATIONS



COMPUTER SCIENCE ENGINEERING (05 – CSE) CS 05435

OPERATING SYSTEM

CS 3121 INTERFACING THROUGH MICROPROCESSORS III YEAR I SEM RR

ADVANCED DATA STRUCTURES

CS 05007 � II YEAR I SEM R05

INFORMATION TECHNOLOGY (12 – IT) CS 05435

OPERATING SYSTEM IT 3121 INTER FACING THROUGH MICROPROCESSORS

III YEAR I SEM RR

COMPUTER SCIENCE AND SYSTEMS ENGINEERING

(15 - CSS)

CS 05435

OPERATING SYSTEM

CSS 3122 INTERFACING THROUGH MICROPROCESSORS

III YEAR I SEM RR

ELECTRONICS AND COMPUTER ENGINEERING (19 - ECC)

EC 05342 LINEAR AND DITITAL IC APPLICATIONS

CONTROL SYSTEMS EE 05149 � II YEAR II SEM R05

INSTRUMENTATION AND CONTROL ENGINEERING

(22 – ICE)

CS 05434

OOPS THROUGH JAVA

PULSE AND DIGITAL CIRCUITS

EC 05497 � II YEAR II SEM R05



BRANCH


STUDIED BY THE RE-ADMITTED STUDENTS OF NR

REGULATIONS


STUDENTS OF NR REGULATIONS


(12 – IT)

HS 05353



IT2224 � II YEAR II SEM RR

NOTE:

i. ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY.

ii. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL. iii. THE PRINCIPALS ARE REQUESTED TO INFORM THE UNIVERSITY ANY OTHER SUBSTITUTE SUBJECTS THAT ARE NOT INCLUED IN THE ABOVE LIST IMMEDIATELY.

Sd/-xxxxx




E X A M I N A T I O N B R A N C H III YEAR B.TECH - I SEMESTER – R09 REGULATION (R09) SUPPLEMENTARY EXAMINATIONS, MAY / JUNE, 2012

T I M E T A B L E

T I M E - 10-00 AM TO 01.00 PM

BRANCH

DATE, TIME & DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

CIVIL ENGINEERING

(01-C E)

CONCRETE TECHNOLOGY

DESIGN OF

REINFORCED

CONCRETE STRUCTURES

WASTE MANAGEMETN

WATER RESOURCES

ENGINEERING-I

GEOTECHNICAL

ENGINEERING-I ENGINEERING GEOLOGY

ENVIRONMENTAL

IMPACT ASSESSMENT AND

MANAGEMENT

ADVANCED STRUCTURAL

ANALYSIS

ELECTRICAL AND

ELECTRONICS ENGINEERING

(02-E E E)

IC APPLICATIONS

COM. TO

ETM, ECE, EEE

MANAGEMENT

SCIENCE

COM. TO EEE, AE

CONTROL SYSTEMS

COM. TO

ECE,EEE, ETE

POWER

ELECTRONICS

ELECTRICAL MACHINES-III

POWER SYSTEMS-II


(03-M E)


COM. TO

ME,EIE ,IT, E.COMP.E, MECT, ICE, BT, AME, BME

METROLOGY &

SURFACE

ENGINEERING

DYNAMICS OF

MACHINERY COM. TO

ME, MECT, AME

MACHINE TOOLS

DESIGN OF MACHINE

MEMBERS-I

APPLIED THERMODYNAMICS-II

COM. TO

ME, AME

ELECTRONICS AND

COMMUNICATIONS

ENGINEERING (04-E C E)

IC APPLICATIONS COM. TO

ETM, ECE, EEE

ELECTRONIC MEASUREMENTS &

INSTRUMENTATION

CONTROL SYSTEMS COM. TO

ECE,EEE, ETE

COMPUTER

ORGANIZATION

ANTENNAS AND

WAVE

PROPAGATION COM. TO ECE, ETM

ANALOG COMMUNICATIONS

COMPUTER SCIENCE AND

ENGINEERING (05-C S E)

PRINCIPLES OF PROGRAMMING

LANGUAGES

SOFTWARE ENGINEERING

COM. TO CSE, ECOMP, IT

MICRO

PROCESSORS & INTERFACING

OPERATION

RESEARCH OPERATING

SYSTEMS

COM. TO CSE, IT

DATA COMMUNICATION AND

COMPUTER NETWORKS

INTELLECTUAL

PROPERTY RIGTHS & CYBER LAWS

COMPUTER

FORENSICS

CHEMICAL

ENGINEERING (08-C H E M)


THERMODYNAMICS-II

CHEMICAL

REACTION ENGINEERING-1

MASS TRANSFER

OPERATIONS-I

PROCESS HEAT

TRANSFER

BIO PROCESS ENGINEERING

ENERGY ENGINEERING NANO TECHNOLOGY

INTELLECTUAL

PROPERTY RIGHTS

ELECTRONICS AND

INSTRUMENTATION

ENGINEERING (10-E I E)


FINANCIAL ANALYSIS COM. TO

ME,EIE ,IT, E.COMP.E, MECT,

ICE, BT, AME, BME

ANALOG AND


COM. TO

EIE, BME, ICE

PULSE AND

DIGITAL CIRCUITS

COM. TO EIE,ICE

SIGNAL CONDITIONING

CIRCUITS

PRINCIPLES OF ELECTRONIC

INSTRUMENTATION

---



PAGE – 2

BRANCH

DATE, TIME & DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

BIO-MEDICAL

ENGINEERING

(11-B M E)


COM. TO


ANALOG AND DIGITAL


EIE, BME, ICE

PRINCIPLES OF COMMUNICATIONS

BASIC CLINICAL SCIENCES-II

BIOFLUIDS AND MECHANICS


COM. TO

ECOMPE, ICE, BME, ETM


(12- I T)


AND FINANCIAL ANALYSIS COM. TO


ICE, BT, AME, BME

SOFTWARE

EMGINEERING COM. TO

CSE, ECOMP, IT

COMPUTER

NETWORKS

LINUX

PROGRAMMING

OPERATING

SYSTEMS

COM. TO CSE, IT

AUTOMATA & COMPILER DESIGN

MECHANICAL

ENGINEERING (MECHATRONICS)

(14-MCT)


COM. TO


FINITE ELEMENT TECHNIQUES

DYNAMICS OF

MACHINERY COM. TO

ME, MECT, AME

SWITCHING

THEORY AND

LOGIC DESIGN

MACHINE TOOLS

PRINCIPLES OF MACHINE DESIGN

ELECTRONICS AND

TELEMATICS

ENGINEERING (17-E T M)


ETM, ECE, EEE

ANALOG & DIGITAL

COMMUNICATIONS

CONTROL

SYSTEMS

COM. TO ECE,EEE, ETE

COMPUTER

ORGANIZATION

ANTENNAS AND

WAVE PROPAGATION

COM. TO

ECE, ETM

DIGITAL SIGNAL PROCESSING COM. TO


METALLURGY AND

MATERIAL

TECHNLOGY (18-M M T)

BASIC ELECTRONICS WELDING

TECHNOLOGY

MECHANICAL

METALLURGY

HEAT TREATMENT

TECHNOLOGY

NON FERROUS EXTRACTIVE

METALLURGY

IRON PRODUCTION

ELECTRONICS AND COMPUTER

ENGINEERING

(19-E C C)



COM. TO ME,EIE ,IT, E.COMP.E, MECT,

ICE, BT, AME, BME

SOFTWARE ENGINEERING

COM. TO

CSE, ECOMP, IT

COMPILER DESIGN

DATA BASE

MANAGEMENT SYSTEMS

DESIGN &

ANALYSIS OF ALGORITHMS


COM. TO ECOMPE, ICE, BME, ETM

AERONAUTICAL


FLIGHT MECHANICS-II

MANAGEMENT

SCIENCE

COM. TO EEE, AE

AEROSPACE

PROPULSION-I

AEROSPACE

VEHICLES STRUCTURES -II

AIR

TRANSPORTATION SYSTEMS

AERODYNAMICS-II

INSTRUMENTATION

AND CONTROL ENGINEERING

(22-I C E)


COM. TO


ANALOG AND DIGITAL


EIE, BME, ICE

PULSE AND

DIGITAL CIRCUITS COM. TO

EIE,ICE

INSTRUMENTATION

PRACTICES IN

INDUSTRIES

---


COM. TO


BIOTECHNOLOGY

(23-B O T)


AND FINANCIAL ANALYSIS COM. TO


ICE, BT, AME, BME

TRANSPORT PHENOMENA IN

BIOPROCESSES

BIOCHEMICAL REACTION

ENGINEERING

BASIC INDUSTRIAL

AND

ENVIRONMENTAL BIOTECHNOLOGY

GENETIC

ENGINEERING

FUNDAMENTALS OF ENZYME MECHANISMS &

TECHNOLOGY

AUTOMOBILE

ENGG.

(24 – AME)


COM. TO


MACHANICS OF

FLUIDS AND HYDRAULIC

MACHINES

DYNAMICS OF

MACHINERY COM. TO

ME, MECT, AME

DESIGN OF

MACHINE

ELEMENTS

VEHICLE DYNAMICS

APPLIED THERMODYNAMICS-

II COM. TO

ME, AME


PAGE : 4



BRANCH



REGULATIONS



ELECTRICAL AND ELECTRONICS ENGINEERING (02-E E E)

Control Systems Electronic Circuits (EEE R09 II/II)

ELECTRONICS AND COMMUNICATIONS ENGINEERING

(04-E C E) Control Systems Software Engineering (CSE R09 III/I)

COMPUTER SCIENCE AND ENGINEERING (05-C S E)

Principles of Programming Language Net work Programming (CSE R07 IV/I)

Principles of Programming Language Formal Languages & Automata Theory (CSE R09 II/II) Software Engineering

ELECTRONICS AND INSTRUMENTATION ENGINEERING

(10-E I E) Managerial economics & Financial Analysis Principles of Communication (EIE R09 II/II)

INFORMATION TECHNOLOGY (12- I T)

Managerial economics & Financial Analysis E-Commerce(IT R07 III/II)

ELECTRONICS AND TELEMATICS ENGINEERING

(17-E T M) Control Systems Software Engineering (CSE R09 III/I)


Pulse & Digital Circuits Transduction of physical Variables

(ICE R09 II/I)



BRANCH



REGULATIONS



ELECTRONICS AND INSTRUMENTATION ENGINEERING

(10-E I E)

Pulse & Digital Circuits

Control Systems (EIE R09 II/II)

Transduction of physical Variables

(EIE R09 II/ I)

INFORMATION TECHNOLOGY (12- I T)

Operating Systems Distributed Database (IT R07 III/I)

COMPUTER SCIENCE AND ENGINEERING

(05-C S E) Microprocessor & Interfacing

Unix and Shell Programming

(CSE R07 II/I)


Pulse & Digital Circuits

Control Systems (EIE R09 II/II)




BRANCH



REGULATIONS



ELECTRICAL AND ELECTRONICS ENGINEERING (02-E E E)

IC Applications Network Theory (EEE R09 II/II)II/II)

ELECTRONICS AND COMMUNICATIONS ENGINEERING

(04-E C E) Analog Communications


(CSE R09 III/I)


Signal Conditioning Circuits Transducers & Applications (EIE R09 II/II)


(12- I T) Software Engineering

Microprocessor & Interfacing (IT R07 III/I)

Design and Analysis of Algorithms (CSE R09 II/II)

Data Communication Systems (IT R07 III/ I)

ELECTRONICS AND TELEMATICS ENGINEERING (17-E T M)

Analog Communications Principles of Programming Languages

(CSE R09 III/I)

INSTRUMENTATION AND CONTROL ENGINEERING

(22-I C E) Linear & Digital IC Applications Environmental Studies (ICE R09 II/II)


DATE OF EXAMINATION: 14-06-12(THURSDAY) TIME OF EXAMIANTION: 02.00 PM TO 05.00 PM

BRANCH



REGULATIONS




Linear & Digital IC Applications

Electrical Circuits Analysis (EIE R09 II/II)

COMPUTER SCIENCE AND ENGINEERING

(05-C S E) Software Engineering

Design and Analysis of Algorithms

(CSE R09 II/II)


(12- I T) Managerial Economics & Financial Analysis

Design and Analysis of Algorithms

(CSE R09 II/II)

NOTE:

i. ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY. ii. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL.


Sd/-xxxxx


III YEAR B.TECH. I SEMESTER (RR)


E X A M I N A T I O N B R A N C H

III YEAR B.TECH - I SEMESTER– REVISED REGULATIONS (RR) - SUPPLEMENTARY EXAMINATIONS, MAY / JUNE, 2012

T I M E T A B L E T I M E - 10-00 AM TO 01.00 PM

BRANCH

DATE AND DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

CIVIL ENGINEERING

(01-C E)

STRUCTURAL

ENGINEERING DESIGN

AND DRAWING – I

(RCC)

ENVIRONMENTAL

ENGINE

ERING – I

CONCRETE

TECHNOLOGY AND

PRESTRESSED

CONCRETE

WATER RESOURCES

ENGINEERING – I

ENGINEERING

GEOLOGY

MANAGERIAL

ECONOMICS &

FINANCIAL ANALYSIS

(Common to CE, BOT,

ME, MEP, MMT)

ELECTRICAL AND

ELECTRONICS

ENGINEERING

(02-E E E)

COMPUTER

ORGANISATION

(Common to EEE, EIE,

ECE, ETM, ICE)

ELECTRICAL

MEASUREMENTS

POWER

SYSTEMS – II POWER ELECTRONICS

ELECTRO-MECHANICS

– III

MANAGEMENT

SCIENCE

(Common to EEE, ECE,

MCT, ICE, BME, CSS,

EconE, EIE

MECHANICAL

ENGINEERING

(03-M E)

PRODUCTION

TECHNOLOGY

KINEMATICS OF

MACHINES

(Common to ME, MEP,

MCT)

THERMAL

ENGINEERING – II

HYDRAULIC

MACHINERY AND

SYSTEMS

DESIGN OF MACHINE

MEMBERS – I

(Common to ME, MEP)

MANAGERIAL

ECONOMICS &

FINANCIAL ANALYSIS

(Common to CE, BOT,

ME, MEP, MMT)

ELECTRONICS AND

COMMUNICATIONS

ENGINEERING

(04-E C E)

COMPUTER

ORGANISATION


ECE, ETM, ICE)

ANTENNAS AND WAVE

PROPAGATION

(Common to ECE, ETM)

DIGITAL

COMMUNICATION


LINEAR I C

APPLICATIONS

DIGITAL I C

APPLICATIONS

MANAGEMENT

SCIENCE


MCT, ICE, BME, CSS,

EconE, EIE

COMPUTER SCIENCE

AND

ENGINEERING

(05-C S E)

INTERFACING

THROUGH

MICROPROCESSORS

(Common to CSE, IT, CSS)

DATA

COMMUNICATION


THEORY OF

COMPUTATION

(Common to CSE, CSS)

ARTIFICIAL

INTELLIGENCE

PRINCIPLES OF

PROGRAMMING

LANGUAGES


OBJECT ORIENTED

ANALYSIS AND DESIGN

THROUGH U M L

(Common to CSE, IT)

CHEMICAL

ENGINEERING

(08-C H E M)

MECHANICAL UNIT

OPERATIONS

CHEMICAL

ENGINEERING

THERMO-

DYNAMICS – II

HEAT TRANSFER PROCESS

INSTRUMENTATION

MASS TRANSFER

OPERATIONS – I ENERGY ENGINEERING

ELECTRONICS AND

INSTRUMENTATION

ENGINEERING

(10-E I E)

COMPUTER

ORGANISATION


ECE, ETM, ICE)

PROCESS CONTROL

INSTRUMENTATION

(Common to EIE, ICE)

ELECTRONIC

EQUIPMENT DESIGN


INDUSTRIAL

INSTRUMENTATION

LINEAR AND DIGITAL

IC APPLICATIONS

(Common to EIE, ETM,

BME, Econ.E, MCT)

MANAGEMENT

SCIENCE


MCT, ICE, BME, CSS,

EconE, EIE



PAGE – 2

BRANCH

DATE AND DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

BIO-MEDICAL

ENGINEERING

(11-B M E)

BIO-FLUIDS AND

MECHANICS

DIGITAL SIGNAL

PROCESSING

(Common to BME, ECC)

BASIC CLINICAL

SCIENCES – II

BIO-MEDICAL

EQUIPMENT

LINEAR AND DIGITAL

IC APPLICATIONS


BME, Econ.E, MCT)

MANAGEMENT

SCIENCE


MCT, ICE, BME, CSS,

EconE, EIE

INFORMATION

TECHNOLOGY

(12- I T)

INTERFACING

THROUGH

MICROPROCESSORS


DATA

COMMUNICATIONS


SOFTWARE

ENGINEERING

COMMUNICATION

THEORY

COMPUTER GRAPHICS

(Common to ECC, IT)

OBJECT ORIENTED

ANALYSIS AND DESIGN

THROUGH

U M L

(Common to CSE, IT)

ELECTRONICS &

CONTROL

ENGINEERING

(13-E Con. E)

OPERATIONS

RESEARCH

COMMUNICATION

ENGINEERING PROCESS CONTROL

COMPUTER

OPERATING SYSTEMS

LINEAR AND DIGITAL

IC APPLICATIONS


BME, Econ.E, MCT)

MANAGEMENT

SCIENCE


MCT, ICE, BME, CSS,

EconE, EIE)

MECHANICAL

ENGINEERING

(MECHATRONICS)

(14-MCT)

MANUFACTURING

TECHNOLOGY

KINEMATICS OF

MACHINES

(Common to ME, MEP,

MCT)

DIGITAL ELECTRONICS FINITE ELEMENT

METHOD

LINEAR AND DIGITAL

IC APPLICATIONS


BME, Econ.E, MCT)

MANAGEMENT

SCIENCE


MCT, ICE, BME, CSS,

EconE, EIE)

COMPUTER SCIENCE

AND SYSTEMS

ENGINEERING

(15-C S S)

INTERFACING

THROUGH

MICROPROCESS-ORS


DATA

COMMUNICATIONS


THEORY OF

COMPUTATION


SYSTEMS

PROGRAMMING

PRINCIPLES OF

PROGRAMMING

LANGUAGES


MANAGEMENT

SCIENCE


MCT, ICE, BME, CSS,

EconE, EIE)

ELECTRONICS AND

TELEMATICS

ENGINEERING

(17-E T M)

COMPUTER

ORGANISATION


ECE, ETM, ICE)

ANTENNA AND WAVE

PROPAGATION


DIGITAL

COMMUNICATION


BASICS OF

TELEMATICS

LINEAR AND DIGITAL

IC APPLICATIONS


BME, Econ.E, MCT)

MICROWAVE

ENGINEERING

METALLURGY AND

MATERIAL

TECHNLOGY

(18-M M T)

PROBABILITY AND

STATISTICS

MECHANICAL

METALLURGY

HEAT TREATMENT

TECHNOLOGY

METALLURGICAL

THERMODYNAMICS

TECHNIQUES OF

METAL JOINING

MANAGERIAL

ECONOMICS &

FINANCIAL ANALYSIS

(Common to CE, BOT,

ME, MEP, MMT)

ELECTRONICS AND

COMPUTER

ENGINEERING

(19-E C C)

DIGITAL SYSTEM

DESIGN

DIGITAL SIGNAL

PROCESSING

(Common to BME, ECC)

MICROPROCESSORS

AND INTERFACING

OPERATING SYSTEMS

AND SYSTEMS

PROGRAMMING

COMPUTER GRAPHICS

(Common to ECC, IT)

EMBEDDED SYSTEMS

DESIGN



PAGE-3

BRANCH

DATE AND DAY

29-05-12

TUESDAY

31-05-12

THURSDAY

02-06-12

SATURDAY

05-06-12

TUESDAY

12-06-12

TUESDAY

14-06-12

THURSDAY

MECHANICAL

ENGINEERING

(PRODUCTION)

(20-M E P)

MICROPROCESSORS

AND INTERFCING

KINEMATICS OF

MACHINES

(Common to ME, MEP,

MCT)

METROLOGY AND

QUALITY CONTROL TURBO MACHINERY

DESIGN OF MACHINE

MEMBERS – I

(Common to ME, MEP)

MANAGERIAL

ECONOMICS &

FINANCIAL ANALYSIS

(Common to CE, BOT,

ME, MEP, MMT)

AERONAUTICAL

ENGINEERING

(21-A E)

AIRCRAFT

PERFORMANCE

AIRCRAFT

STRUCTURES – I

AEROSPACE

PROPULSION – I AERODYNAMICS – II

WIND TUNNEL

TECHNIQUES

AIRCRAFT

PRODUCTION

TECHNOLOGY

INSTRUMENTATION

AND CONTROL

ENGINEERING

(22-I C E)

COMPUTER

ORGANISATION


ECE, ETM, ICE)

PROCESS CONTROL

INSTRUMENTATION


ELECTRONIC

EQUIPMENT DESIGN


ANALYTICAL

INSTRUMENTATION

INDUSTRIAL

ELECTRONICS

MANAGEMENT

SCIENCE


MCT, ICE, BME, CSS,

EconE, EIE

BIOTECHNOLOGY

(23-B O T)

MASS TRANSFER AND

SEPARATION

GENETIC

ENGINEERING

BIO-CHEMICAL

ENGINEERING

PLANT

BIO-TECHNOLOGY

ENVIRONMENTAL BIO-

TECHNOLOGY

MANAGERIAL

ECONOMICS &

FINANCIAL ANALYSIS

(Common to CE, BOT,

ME, MEP, MMT)

AUTOMOBILE ENGG.

(24 – AME)

MANAGERIAL

ECONOMICS &

FINANCIAL ANALYSIS

PRODUCTION

TECHNOLOGY

KINEMATICS OF

MACHINERY

HYDRAULIC

MACHINERY AND

SYSTEMS

THERMAL

ENGINEERING – II

DESIGN OF MACHINE

ELEMENTS

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF RR REGULATIONS


BRANCH

THE SUBJECT(S) OF RR REGULATIONS, ALREADY


REGULATIONS




(03 – ME)

PRODUCTION TECHNOLOGY

BASIC ELECTRONICS

(COURSE NUMBER MP2124)

OFFERED AT II B.TECH.M (P) E. I SEMESTER OF 2002-2003

REGULATIONS


(PRODUCTION)

(20 – MEP)



PAGE - 4

TIME TABLE FOR SUBSTITUTE SUBJECTS FOR READMITTED STUDENTS OF RR REGULATIONS


BRANCH

THE SUBJECT(S) OF RR REGULATIONS, ALREADY


REGULATIONS



CIVIL ENGNEERING (01-C E) CH 3122 STRUCTURAL ENGINEERING

STRUCTURAL ANALYSIS-I

(COURSE NUMBER CE 3102 OFFERED AT III B.TECH (CE) I –

SEMESTER OF 1999-2000 RGULATIONS)

MECHANICAL ENGINEERING (03 – ME)

ME 3124 KINEMATICS OF MACHINES

INSTRUMENTATION & CONTROL SYSTEMS

(COURSE NUMBER ME 3203 OFFERED AT III BTECH, (ME) II-

SEMESTER OF 1999-2000 REGULATIONS) MECHANICAL ENGINEERING

(PRODUCTION) (20 – MEP)

ELECTRONICS & COMMUNICATION ENGINEERING

(04 – ECE)

EC 3121 MANAGEMENT SCIENCE

COMPUTER GRAPHICS

(COURSE NUMBER ECM 3126 OFFERED AT III B.TECH, (ECM)

I-SEMESTER OF 2002-2003 REGULATIONS)


(08-C H E M) CH 3121 ENERGY ENGINEERING

PETROCHEMICAL ENGINEERING

(COURSE NUMBER CH 3206 OFFERED AT III B.TECH, (CHE) II

– SEMESTER OF 1999-2000 REGULATIONS IN ELECTIVE-I)

BIO-MEDICAL ENGINEERING

(11-B M E)

BM 3125 BIO-FLUIDS AND MECHANICS

COMPUTERS IN MEDICINES

(COURSE NUMBER BME 305 OFFERED AT III B.TECH, (BME) I

– SEMESTER OF 1999-2000 REGUATIONS)


(12 – IT) IT 3124 COMMUNICATION THEORY

DATABASE MANAGEMENT SYSTEMS

(COURSE NUMBER IT 3106 OFFERED AT III BTECH, (IT) I –

SEMESTER OF 1999-2000 REGULATIONS)

THEORY OF COMPUTATION

(COURSR NUMBER IT-3104 OFFERED AT III BTECH, (CSIT) I

SEMSTER OF 1999-2000 REGULATONS)


(MECHATRONICS)

(14-MCT)

MC 3125 KINEMATICS OF MACHINES

COMPUTER GRAPHICS

(COURSE NUMBER OFFERED AT III BTECH, ME(MECH) I-

SEMESTER OF 1999-2000 REGULARIONS)

COMPUTER SCIENCE & SYSTEMS ENGINEERING

(15-C S S) CSS 3121 PRINCIPLES OF PROGRAMMING LANGUAGES

DESIGN & ANALYSIS OF ALGORITHMS

(COURSE NUMBER CSS 3105 OFFERED AT III B.TECH,(CSSE)

I-SEMESTER OF 1999-2000 REGULATIONS)

MECHANICAL ENGINEERING (PRODUCTION)

(20 – MEP)

MP3121 MANAGERIAL ECONOMICS AND FINANCIAL

ANALYSIS

ENTREPRENEURSHIP AND MANAGEMENT

(COURSE NUMBER OFFERED AT IV BTECH, ME(PROD) II-

SEMESTER OF 1999-2000 REGULATIONS)

NOTE:

i. ANY OMISSIONS OR CLASHES IN THIS TIME TABLE MAY PLEASE BE INFORMED TO THE CONTROLLER OF EXAMINATIONS, IMMEDIATELY.

ii. EVEN IF GOVERNMENT DECLARES HOLIDAY ON ANY OF THE ABOVE DATES, THE EXAMINATIONS SHALL BE CONDUCTED AS USUAL.


Sd/-xxxxx


Documents

III YEAR I SEM - manabadi.co.inmanabadi.co.in/Timetables/JNTUH-BTech-III-Year-I-Sem-R05...III YEAR B.TECH - I SEMESTER – R07 REGULATION (R07) SUPPLEMENTARY EXAMINATIONS, MAY / JUNE.,