APEM www.apem.com

IKD seriesSurface Mount and Through Board Low Profile Dual in Line Switches

General

Raised and recessed actuators

Even and odd pole numbers

Self-cleaning wiping contacts

Gold plated terminals

Process compatible - withstand IR and vapor phasereflow solderingWashable (tape seal standard), except 1-pole model

• Max. current/voltage rating : -Switching: 25mA 24VDC -Non-switching: 100mA 50VDC• Initial contact resistance : 50mΩ max• Insulation resistance : 100MΩ min. at 500VDC• Dielectric strength: 500VAC min.• Electrical life : 2,000 cycles• Travel : 1 mm (0.39)• Operating temperature : -200C to +850C• Storage temperature : -400C to +850C

• Case & actuator :UL94-V0• Moving contact : phosphor bronze, gold plated, over nickel barrier• Terminal : gold plated• Protection tape : polyimide

MaterialsGeneral Specifications

Packaging• Reels of 900 pieces Tape IEC 286-3 (EIA481A) std• IC Tube (Contact APEM)

APEM

Overview

Through Board

03-Serie IM-A_08-Serie IP-A 31/10/14 08:02 Page12

APEMwww.apem.com

Overview cont

IKD

SERIES

Note: The company reserves the right to change specifications without notice.

Surface Mount and Through Board Dual in Line Switches

Number of ways

08

001 Through hole raised actuators000 Through hole recessed actuators031 SMT raised actuators IC tubes030 SMT recessed actuators IC tubes041 SMT raised actuators T/R040 SMT recessed actuators T/R051 SMT J bend raised actuators IC tubes050 SMT J bend recessed actuators IC tubes061 SMT J bend raised actuators T/R060 SMT J bend recessed actuators T/R

001

00 Top tape seal*01 No tape seal

00

Model Type Tape seal

For other combinations contact APEM

IKD series

01 One way02 Two way03 Three way04 Four way05 Five way06 Six way

07 Seven way08 Eight way09 Nine way10 Ten way11 Eleven way12 Twelve way

Surface mount Gull Wing

Surface mount J bend

* Recessed actuators only

APEM

APEM