Upload
vothien
View
239
Download
4
Embed Size (px)
Citation preview
Москва, 29-30 октября 2012 г.
Международная конференция
Состояние и перспективы развития
интегрированной модульной авионики
IMA System Qualification
Saulin V. N. Stepanenko N. I.
Международная конференция по модульной авионике
IAC AR Working Group
WG Chairman Saulin V. N. ([email protected])
WG Tasks IAC AR Regulations Preparation for
Integrated Modular Avionic System
Qualification
WG Members
Международная конференция по модульной авионике
Regulation Drafts
Integrated Modular Avionics
Development and Certification Guidance
(Р-297)
Qualification Requirements
«Integrated Modular Avionics Hardware Elements»
(KT-XXX)
Advisory material
«Integrated Modular Avionics Systems Qualification»
(PM-297)
Международная конференция по модульной авионике
Guidance
Guidance
should be considered as technical translation
of the document RTCA DO-297/EUROCAE ED-124
" Integrated Modular Avionics (IMA) Development
Guidance and Certification Considerations ".
In this document all sections and subsections of the DO-297/ED-124
are retained
References to IAC AR documents are included in Subsection 1.5
Международная конференция по модульной авионике
Qualification Requirements
Qualification Requirements
are prepared on basis of FAA TSO-C153
«Integrated Modular Avionics Hardware Elements»
This document prescribes the minimum performance standards criteria that an
Integrated Modular Avionics hardware element must meet to be identified with
the applicable qualification requirements markings
The standards of this QR apply to hardware modules, and cabinets or racks that
host hardware modules
Международная конференция по модульной авионике
Advisory material
Advisory material
is divided on sections
IMA system qualification procedures (on basis of the IAC AR РМ 21-9СЛ «Complex Appliances Qualification»)
Reusable Software Components Qualification (on basis of the FAA AC 20-148 «Reusable Software Components»)
Data bus Assurance (on basis of the FAA AC 20-156 «Aviation Databus Assurance»)
Международная конференция по модульной авионике
AM – Qualification procedures
This Section
provides approval procedures, which determine: IMA system qualification perform in order which is described in chapter 9 AP-21.
Documents Р-297, КТ-178В, КТ-254 etc. are used.
Incremental acceptance for IMA system qualification must be used. This is a
process for obtaining credit toward appliance approval by accepting that an IMA
module, application, and off-aircraft IMA system complies with specific
requirements/objectives. Credit for specific on-aircraft requirements/objectives and
assessment of all qualification works results are also needed for IMA system
approval.
The IAC AR establish Group of experts for system life data examinations and
assessments that IMA system modules, applications and system in whole complies
with applicable requirements/objectives. If all applicable requirements/objectives
for the module etc. are reached, than Group issue «Acceptance conclusion». It may
be used only in current qualification process, unlike system life data reviewed which
may be used in other qualification processes.
Other procedures and instructions...
Международная конференция по модульной авионике
AM – Software components
This Section
provides one acceptable means of compliance, but not the only means, for reusable
software component developers and applicants to gain:
IAC AR approval of a software component that may be only a part of an
appliance’s software intended functions
Credit to the objectives of KT-178B for the reuse of a software component
in other appliances approval projects
Subsections are
Qualification liaison process
Guidelines for the RSC developer
Guidelines for the applicant using the RSC
Common software reuse issues
Changes to reusable software components
Concurrent use of an RSC
Международная конференция по модульной авионике
AM – Data bus
This Section
provides guidelines for an assessment a data bus, external and internal, when
complex appliances are qualified. The assessment criteria are divided in eight
categories :
Safety
Data integrity
Data bus performance
Software and hardware assurance
Electromagnetic compatibility
Verification and validation
Configuration management
Security assurance
Международная конференция по модульной авионике
Thank you for your attention
All Persons Concerned
are Welcome
to Participate in
IAC AR Working Group