IMPACT SOCKETS & SLUGGING WRENCHES - … SOCKETS & SLUGGING WRENCHES ... Deep and Thinwall Sockets Up to 3.1/2" square drive Impact Sockets through to 235MM ... inch MODEL NO. D1 inch

IMPACT SOCKETS & SLUGGING WRENCHES

www.impactsocket.com

Sockets in this catalog are designed for impact use. Always use safety goggles when using impact

equipment.

SAFETY NOTICE

Standard, Deep and Thinwall Sockets

Up to 3.1/2" square drive Impact Sockets through to 235MM (9.1/8") across the flats

# 5 spline drive to across the flats

Wide variety of Accessories

PROFILE

The profile is provided on the square drives as well as on the hexagon end of Impact Sockets

1/2" square drive and above.

The benefits of the profile include are

Reduced risk of fastener rounding.

Increased chances of turning worn fasteners.

Elimination of high stress concentration points increasing the impact resistance and the torque

transmitting capability.

Impact Sockets of 1/2" square drive and above feature for flats above 17 mm (5/8").

All Impact Sockets are made from high strength alloy steel.

All Impact Sockets are heat treated for the best combination of strength and impact resistance.

All Impact Sockets have an optimum wall thickness for strength and access on fasteners having restrictions.

The depth of the Hex openings is designed to accomodate the full standard fastener head.

All Impact Sockets have chamfered openings for ease in engagement with the drive tool and the fastener.

Concentric openings and large clearance holes to meet industrial specifications.

All Impact Sockets have a Ring-N-Pin arrangement for securing them to the drive.

Sockets are plated and black oxidized coated for increased protection from rusting.

IMPACT SOCKETS, ACCESSORIES AND SOCKET SETS

80mm (4")

Freecorner

Freecorner

Freecorner

'POWERMASTER' IMPACT SOCKETS

‘POWERMASTER' freecorner

CONVENTIONAL PROFILE

Corner point contact high

stress areas

FREECORNER PROFILE

Distributed surface loads

relieves possible stress

area

Highlights show contact

points on the corner of the

fastener

Highlights show contact

points away from the

corner of the fastener

The Powermaster warranty will replace free to the

original purchaser any qualifying socket found to be

defective in either material or workmanship, indicated

by premature wear or breakage. Determination of free

replacement will be done by your Powermaster

distributor. Impact Sockets, by nature of their

application are subject to extreme stresses, therefore

special application sockets such as thinwall, hex

driver, accessories and slugging wrenches are

specifically excluded from the replacement warranty.

POWERMASTER WARRANTY

3/8” SQUARE DRIVE IMPACT SOCKETS

1/2” SQUARE DRIVE IMPACT SOCKETS1/2” SQUARE DRIVE IMPACT SOCKETS

3/4” SQUARE DRIVE IMPACT SOCKETS

1” SQUARE DRIVE IMPACT SOCKETS

1.1/2” SQUARE DRIVE IMPACT SOCKETS



# 5 SPLINE DRIVE IMPACT SOCKETS

CASTELLATED SOCKETS

STRAIGHT SLUGGING WRENCHES METRIC & SAE

OFFSET SLUGGING WRENCHES METRIC & SAE

OPEN JAW SLUGGING WRENCHES

BOX BI-HEX SLUGGING WRENCHES

STRUCTURAL WRENCHES

INSERT SOCKETS

TURBINE TOOLS

PAGE 4

PAGE 6

PAGE 9

PAGE 13

PAGE 19

PAGE 22

PAGE 25

PAGE 26

PAGE 29

PAGE 31

PAGE 33

PAGE 34

PAGE 35

PAGE 36

PAGE 38

PAGE 39

PO

WE

RM

AS

TE

R

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

5/163/8

7/16

S-0605S-0606S-0607

0.5500.6290.668

0.7470.7470.747

0.2360.2750.314

0.5300.5300.530

1.0021.0021.002

0.0670.0700.072

1/29/165/8

S-0608S-0609S-0610

0.7860.8640.943

0.7860.8640.864

0.3540.3930.393

0.5300.7070.707

1.0021.1791.179

0.0890.1300.144

11/163/4

S-0611S-0612

1.0221.061

0.8640.864

0.4720.472

0.7070.707

1.1791.179

0.1680.181

13/167/8

S-0613S-0614

1.1791.218

0.8640.864

0.4720.511

0.7070.707

1.1791.179

0.2180.233

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

8910

S-06M8S-06M9

S-06M10

14.015.016.0

19.019.019.0

6.07.07.0

14.014.014.0

25.525.525.5

0.0300.0310.032

111213

S-06M11S-06M12S-06M13

17.019.020.0

19.019.020.0

8.09.09.0

14.014.014.0

25.525.525.5

0.0330.0360.041

141516

S-06M14S-06M15S-06M16

21.022.024.0

21.022.022.0

10.010.010.0

18.018.018.0

30.030.030.0

0.0530.0590.066

171819

S-06M17S-06M18S-06M19

25.026.027.0

22.022.022.0

12.012.012.0

18.018.018.0

30.030.030.0

0.0720.0770.082

202122

S-06M20S-06M21S-06M22

29.030.031.0

22.022.022.0

12.012.013.0

18.018.018.0

30.030.030.0

0.0940.0990.106

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

8910

S-06M8LS-06M9L

S-06M10L

14.015.016.0

19.019.019.0

6.07.07.0

42.042.042.0

54.054.054.0

0.0550.0580.062

111213

S-06M11LS-06M12LS-06M13L

17.019.020.0

19.019.020.0

8.09.09.0

42.042.042.0

54.054.054.0

0.0640.0760.084

1415

S-06M14LS-06M15L

21.022.0

21.022.0

10.010.0

48.048.0

60.060.0

0.1010.110

1719

S-06M17LS-06M19L

25.027.0

22.022.0

12.012.0

48.048.0

60.060.0

0.1390.154

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

5/163/8

7/16

S-0605LS-0606LS-0607L

0.5500.6290.668

0.7470.7470.747

0.2360.2750.314

1.6501.6501.650

2.1222.1222.122

0.1220.1350.141

1/29/165/8

S-0608LS-0609LS-0610L

0.7860.8640.944

0.7860.8640.866

0.3540.3930.433

1.6501.8861.811

2.1222.3582.362

0.1840.2430.265

11/163/4

S-0611LS-0612L

1.1791.061

0.8660.864

0.4720.472

2.0471.886

2.5982.358

0.3650.339

13/167/8

S-0613LS-0614L

1.1791.218

0.8640.864

0.4720.511

2.1222.122

2.5932.593

0.3340.348

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

3/87/161/2

0606DH0607DH0608DH

0.6290.6680.786

0.7470.7470.786

0.2750.3140.354

0.5300.5300.530

1.0021.0021.002

0.0700.0720.089

9/165/8

11/16

0609DH0610DH0611DH

0.8640.9431.022

0.8640.8640.864

0.3930.3930.472

0.7070.7070.707

1.1791.1791.179

0.1300.1440.168

3/413/167/8

0612DH0613DH0614DH

1.0611.1791.218

0.8640.8640.864

0.4720.4720.511

0.7070.7070.707

1.1791.1791.179

0.1810.2180.233

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

8910

06M8DH06M9DH

06M10DH

14.015.016.0

19.019.019.0

6.07.07.0

14.014.014.0

25.525.525.5

0.0300.0310.032

111213

06M11DH06M12DH06M13DH

17.019.020.0

19.019.020.0

8.09.09.0

14.014.014.0

25.525.525.5

0.0330.0360.041

141516


21.022.024.0

21.022.022.0

10.010.010.0

18.018.018.0

30.030.030.0

0.0530.0590.066

171819


25.026.027.0

22.022.022.0

12.012.012.0

18.018.018.0

30.030.030.0

0.0720.0770.082

202122


29.030.031.0

22.022.022.0

12.012.013.0

18.018.018.0

30.030.030.0

0.0940.0990.106

IMPACT SOCKETS

A/F Nominal size across flats

D1 Max. outside dia. socket end

D2 Max. outside dia. sq.drive end

OAL Nominal overall length

T Min. depth of socket form

C Bolt clearence depth

A/F A/FT

OAL

D1 D2

C

METRIC BIHEXAGON FRACTIONAL BIHEXAGON

83 “

METRIC HEXAGON FRACTIONAL HEXAGON

METRIC DEEP HEXAGON FRACTIONAL DEEP HEXAGON

IMPACT SOCKETS THINWALL

83 “

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

81011

S-06M8TS-06M10TS-06M11T

12.314.816.1

19.019.019.0

6.07.08.0

14.014.014.0

25.525.525.5

0.0280.0300.031

131719

S-06M13TS-06M17TS-06M19T

18.623.726.3

19.022.022.0

9.012.012.0

14.018.018.0

25.530.030.0

0.0350.0690.081

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

5/163/8

7/16

S-0605TS-0606TS-0607T

0.4840.5510.634

0.7480.7480.748

0.2360.2360.315

0.5310.5310.531

1.0041.0041.004

0.0610.0650.068

1/29/165/8

S-0608TS-0609TS-0610T

0.7320.7870.866

0.7480.7870.866

0.3540.3940.394

0.5310.5310.709

1.0041.0041.181

0.0770.0880.138

Thinwall Deep Hexagon Sockets available on request.

FRACTIONAL HEXAGONMETRIC HEXAGON

IMPACT ACCESSORIES

HEX A/FMM

MODELNO.

BITLENGTH

OALmm

Wt.Kg.

456

06M04H06M05H06M06H

15.015.015.0

45.045.045.0

0.0350.0350.035

810

06M08H06M10H

15.015.0

45.045.0

0.0450.050

OALmm

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

Wt.Kg. (lbs.)

75 (3")150 (6")

300 (12")

E0603E0606E0612

13.0 (0.511) 22.0 (0.866)0.09 (0.20)0.16 (0.35)0.35 (0.77)

SQUAREDRIVE

MODELNO.

DIAmm (inch)

OALmm (inch)

Wt.Kg. (lbs.)

3/8" U0606 22.0 (0.866) 52.0 (2.047) 0.12 (0.27)

OALmm

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

Wt.Kg. (lbs.)

75 (3")125 (5")

250 (10")

S0603S0605S0610

13.0 (0.511) 9.3 (0.366)0.06 (0.13)0.12 (0.26)0.30 (0.66)

SIZEMODEL

NO.HEAD DIAmm (inch)

OALmm (inch)

Wt.Kg. (lbs.)

3/8" F X 1/2" F3/8" F X 3/8" F

AN0608AN0606

22.0 (0.866)38.0 (1.496)35.0 (1.377)

0.09 (0.20)0.07 (0.15)

SIZEMODEL


OALmm (inch)

Wt.Kg. (lbs.)

3/8" F X 1/2" M3/8" F X 1/4" M

A0608A0606

22.0 (0.866)35.0 (1.377)32.0 (1.259)

0.07 (0.15)0.05 (0.11)

HEX A/FSAE

MODELNO.

BITLENGTH

OALinch

Wt.lbs.

5/323/167/32

06005H0603H

06007H

0.5900.5900.590

1.7711.7711.771

0.0800.0800.080

1/45/163/8

0604H0605H0606H

0.5900.5900.590

1.7711.7711.771

0.0800.0900.110

METRIC HEX DRIVER SOCKETS FRACTIONAL HEX DRIVER SOCKETS

REGULAR EXTENSIONS

SQUARE ADAPTORS

UNIVERSAL JOINT

DOUBLE MALE EXTENSIONS

DOUBLE FEMALE ADAPTORS

21 “

IMPACT SOCKETS

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

3/87/161/2

S-0806S-0807S-0808

0.6690.7480.827

0.9840.9840.984

0.3150.3540.394

0.5910.6690.709

1.2601.3391.378

0.1320.1480.160

9/165/8

11/16

S-0809S-0810S-0811

0.9450.9841.063

0.9840.9841.063

0.4330.4330.512

0.7090.7090.787

1.3781.3781.457

0.1810.1880.240

3/413/167/8

S-0812S-0813S-0814

1.1421.2201.339

1.1421.1811.181

0.5510.5510.591

0.8660.8660.984

1.5351.5351.654

0.3010.3410.423

15/161

1.1/16

S-0815S-0816S-0817

1.3781.4571.535

1.1811.1811.181

0.5910.6300.630

0.9841.0241.024

1.6541.6931.693

0.4400.4800.519

1.1/81.3/161.1/4

S-0818S-0819S-0820

1.6541.6721.772

1.1811.7321.732

0.6690.7090.709

1.0631.1021.102

1.7321.7721.772

0.5750.8130.963

1.5/161.3/8

S-0821S-0822

1.8621.869

1.7321.732

0.7090.787

1.1021.181

1.7721.850

1.0831.088

1.7/161.1/2

S-0823S-0824

1.9682.086

1.7321.732

0.8660.866

1.2201.338

1.8892.007

1.2101.255

1.1/16

1.3/16

1.5/16

1.7/16

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

3/87/161/2

S-0806LS-0807LS-0808L

0.6690.7480.827

0.9840.9840.984

0.3150.3540.394

2.4802.4802.480

3.1503.1503.150

0.2700.3100.340

9/165/8

11/16

S-0809LS-0810LS-0811L

0.9450.9841.063

0.9840.9841.063

0.4330.4330.512

2.4802.4802.480

3.1503.1503.150

0.4000.4200.490

3/413/167/8

S-0812LS-0813LS-0814L

1.1421.2201.339

1.1421.1811.181

0.5510.5510.591

2.4802.4802.677

3.1503.1503.346

0.5800.6500.830

15/161

S-0815LS-0816LS-0817L

1.3781.4571.535

1.1811.1811.181

0.5910.6300.630

2.6772.6772.677

3.3463.3463.346

0.8600.9101.010

1.1/8

1.1/4

S-0818LS-0819LS-0820L

1.6541.6721.772

1.1811.7321.732

0.6690.7090.709

2.6772.6772.677

3.3463.3463.346

1.1001.5001.500

1.3/8S-0821LS-0822L

1.8191.869

1.6821.732

0.7870.787

2.6772.677

3.3463.346

1.5601.760

1.1/2S-0823LS-0824L

1.9681.209

1.7321.732

0.8660.866

2.6762.676

3.3463.346

1.8701.910

mmA/F MODEL

NO.D1

mmD2mm

Tmm

Cmm

OALmm

Wt.Kg.

8910

S-08M8LS-08M9L

S-08M10L

15.016.017.0

25.025.025.0

6.07.08.0

63.063.063.0

80.080.080.0

0.1120.1170.122

111213

S-08M11LS-08M12LS-08M13L

19.020.021.0

25.025.025.0

9.09.010.0

63.063.063.0

80.080.080.0

0.1420.1490.156

141516

S-08M14LS-08M15LS-08M16L

22.024.025.0

25.025.025.0

10.011.011.0

63.063.063.0

80.080.080.0

0.1600.1840.192

171819

S-08M17LS-08M18LS-08M19L

26.027.029.0

26.027.029.0

12.013.014.0

63.063.063.0

80.080.080.0

0.2070.2220.264

212223

S-08M21LS-08M22LS-08M23L

31.032.034.0

30.030.030.0

14.014.015.0

63.068.068.0

80.085.085.0

0.2970.3330.375

242526

S-08M24LS-08M25LS-08M26L

35.036.037.0

30.030.030.0

15.016.016.0

68.068.068.0

85.085.085.0

0.3890.4030.415

272830

S-08M27LS-08M28LS-08M30L

39.040.042.0

30.030.030.0

16.017.017.0

68.068.068.0

85.085.085.0

0.4590.4760.501

3236

S-08M32LS-08M36L

45.050.0

44.044.0

18.020.0

68.068.0

85.085.0

0.6840.799

17 S-08M17 26.0 26.0 12.0 20.0 37.0 0.099

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

8910

S-08M8S-08M9

S-08M10

15.016.017.0

25.025.025.0

6.07.08.0

15.015.015.0

32.032.032.0

0.0600.0600.060

111213

S-08M11S-08M12S-08M13

19.020.021.0

25.025.025.0

9.09.010.0

17.017.018.0

34.034.035.0

0.0670.0690.073

141516

S-08M14S-08M15S-08M16

22.024.025.0

25.025.025.0

10.011.011.0

18.018.018.0

35.035.035.0

0.0760.0820.085

1819

S-08M18S-08M19

27.029.0

27.029.0

13.014.0

20.022.0

37.039.0

0.1090.137

212223

S-08M21S-08M22S-08M23

31.032.034.0

30.030.030.0

14.014.015.0

22.022.025.0

39.039.042.0

0.1550.1620.192

242526

S-08M24S-08M25S-08M26

35.036.037.0

30.030.030.0

15.016.016.0

25.026.026.0

42.043.043.0

0.2000.2110.218

272830

S-08M27S-08M28S-08M30

39.040.042.0

30.030.030.0

16.017.017.0

26.027.027.0

43.044.044.0

0.2360.2500.261

3236

S-08M32S-08M36

45.050.0

44.044.0

18.020.0

28.030.0

45.047.0

0.4150.495









A/F A/FT

OAL

D1 D2

C

21 “

IMPACT SOCKET SETS

MODELNO.

QTY. SOCKET A/F

S-08M51 13 PIECES 8,9,10,11,12,13,14,15,16,17,18,19,21

S-08M52 16 PIECES 10,11,12,13,14,15,16,17,18,19,20, 21,22,23,24,27

S-08M53 6 PIECES 13,14,15,16,17,18

S-08LM5116 PIECES

DEEP 10,11,12,13,14,15,16,17,18,19,20,21, 22,23,24,27

S-08LM5212 PIECES

DEEP 10,11,12,13,14,15,16,17,18,19,20,21

MODELNO.

QTY. SOCKET A/F

S-085111 PIECES+ UJOINT

1/2,9/16,5/8,3/4,13/16,7/8,15/16,1, 1.1/16,1.1/8,U-JOINT

S-0852 13 PIECES 7/16,1/2,9/16,5/8,11/16,3/4,13/16, 7/8,15/16,1,1.1/16,1.1/8,1.3/4

S-0853 7 PIECES 7/16,1/2,9/16,5/8,11/16,3/4,13/16

S-08L5114 PIECES

DEEP 3/8,7/16,1/2,9/16,5/8,11/16,3/4,13/16, 7/8,15/16,1,1.1/16,1.1/8,1.1/4

S-08L527 PIECES

DEEP 7/16,1/2,9/16,5/8,11/16,3/4,13/16

1.1/16

1.3/16

1.5/16

1.7/16

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

7/161/2

9/16

0807DH0808DH0809DH

0.7480.8270.945

0.9840.9840.984

0.3540.3940.433

0.6690.7090.709

1.3391.3781.378

0.1480.1600.181

5/811/163/4

0810DH0811DH0812DH

0.9841.0631.142

0.9841.0631.142

0.4330.5120.551

0.7090.7870.866

1.3781.4571.535

0.1880.2400.301

13/167/8

15/16

0813DH0814DH0815DH

1.2201.3391.378

1.1811.1811.181

0.5510.5910.591

0.8660.9840.984

1.5351.6541.654

0.3410.4230.440

1

1.1/8

0816DH0817DH0818DH

1.4571.5351.654

1.1811.1811.181

0.6300.6300.669

1.0241.0241.063

1.6931.6931.732

0.4800.5190.575

1.1/40819DH0820DH0821DH

1.6721.7721.862

1.7321.7321.732

0.7090.7090.709

1.1021.1021.102

1.7721.7721.772

0.8130.9631.083

1.3/8

1.1/2

0822DH0823DH0824DH

1.8691.9682.086

1.7321.7321.732

0.7870.8660.866

1.1811.2201.338

1.8501.8892.007

1.0881.2101.255

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

8910

08M8DH08M9DH

08M10DH

15.016.017.0

25.025.025.0

6.07.08.0

15.015.015.0

32.032.032.0

0.0600.0600.060

111213


19.020.021.0

25.025.025.0

9.09.010.0

17.017.018.0

34.034.035.0

0.0670.0690.073

141516


22.024.025.0

25.025.025.0

10.011.011.0

18.018.018.0

35.035.035.0

0.0760.0820.085

171819


26.027.029.0

26.027.029.0

12.013.014.0

20.020.022.0

37.037.039.0

0.0990.1090.137

212223


31.032.034.0

30.030.030.0

14.014.015.0

22.022.025.0

39.039.042.0

0.1550.1620.192

242526


35.036.037.0

30.030.030.0

15.016.016.0

25.026.026.0

42.043.043.0

0.2000.2110.218

272830


39.040.042.0

30.030.030.0

16.017.017.0

26.027.027.0

43.044.044.0

0.2360.2500.261

3236

08M32DH08M36DH

45.050.0

44.044.0

18.020.0

28.030.0

45.047.0

0.4150.495

IMPACT SOCKETS

METRIC BIHEXAGON

METRIC SIZE FRACTIONAL SIZE

FRACTIONAL BIHEXAGON

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

151617

S-08M15TS-08M16TS-08M17T

22.023.325.0

25.025.025.0

11.011.012.0

18.018.019.0

35.035.036.0

0.0730.0780.086

181921

S-08M18TS-08M19TS-08M21T

26.027.029.5

26.027.030.0

13.014.014.0

20.021.022.0

37.038.039.0

0.0970.1090.137

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

9/165/8

11/16

S-0809TS-0810TS-0811T

0.8640.9170.984

0.9840.9840.984

0.4330.4330.472

0.7090.7090.748

1.3781.3781.417

0.1600.1700.190

3/413/1615/16

S-0812TS-0813TS-0815T

1.0631.1611.341

1.0631.1611.181

0.5510.5510.551

0.8270.8660.905

1.4961.5351.614

0.2400.3000.420

HEX A/Fmm

MODELNO.

BITLENGTH

OALmm

Wt.Kg.

6810

08M6H08M8H

08M10H

15.015.018.0

50.050.055.0

0.0800.0800.090

121417

08M12H08M14H08M17H

18.025.025.0

60.060.060.0

0.1100.1250.145

HEX A/Finch

MODELNO.

BITLENGTH

OALinch

Wt.lbs.

1/45/163/8

0804H0805H0806H

0.5900.5900.708

1.9681.9682.165

0.1600.1750.190

7/161/2

9/16

0807H0808H0809H

0.7080.7080.984

2.3622.3622.362

0.2000.2550.255

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

Wt.Kg. (lbs.)

75 (3")125 (5")200 (8")

E0803E0805E0810

20.0 (0.787) 30.0 (1.181)0.20 (0.44)0.27 (0.59)0.38 (0.83)

SIZEMODEL


OALmm (inch)

Wt.Kg. (lbs.)

1/2" F X 3/8" M1/2" F X 3/4" M

A0806A0812

25.0 (0.984)30.0 (1.181)

40.0 (1.574)50.0 (1.968)

0.07 (0.15)0.12 (0.26)

SQUAREDRIVE

MODELNO.

DIAmm (inch)

OALmm (inch)

Wt.Kg. (lbs.)

1/2" U0808 30.0 (1.181) 72.0 (2.834) 0.25 (0.55)

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

Wt.Kg. (lbs.)

50 (2")127 (5")

S0802S0805

17.0 (0.669) 12.7 (0.500)0.12 (0.26)0.23 (0.50)

1/2" F X 1/2" F1/2" F X 3/4" F

SIZEMODEL


OALmm (inch)

Wt.Kg. (lbs.)

AN0808AN0812

30.0 (1.181)39.0 (1.534)47.0 (1.850)

0.16 (0.35)0.20 (0.44)

21 “


IMPACT ACCESSORIES

Thinwall Deep Hexagon Sockets available on request.


METRIC HEX DRIVER SOCKETS FRACTIONAL HEX DRIVE SOCKETS

REGULAR EXTENSIONS

SQUARE ADAPTORS

UNIVERSAL JOINT



43 “

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

171921

S-12M17S-12M19S-12M21

30.032.036.0

42.042.042.0

12.012.013.0

21.021.024.0

45.045.048.0

0.3030.3060.336

222324

S-12M22S-12M23S-12M24

37.039.039.0

42.042.042.0

13.013.015.0

24.024.024.0

48.048.048.0

0.3380.3480.342

262728

S-12M26S-12M27S-12M28

41.044.044.0

44.044.044.0

15.016.016.0

24.024.024.0

48.048.048.0

0.3760.3960.388

303233

S-12M30S-12M32S-12M33

47.049.050.0

44.044.044.0

18.018.018.0

27.027.027.0

51.051.051.0

0.4430.4530.459

343638

S-12M34S-12M36S-12M38

52.054.057.0

44.054.054.0

20.020.023.0

30.030.035.0

54.054.059.0

0.5090.6470.754

414243

S-12M41S-12M42S-12M43

61.062.063.0

54.054.054.0

23.025.025.0

35.035.038.0

59.059.062.0

0.8110.8140.862

4650

S-12M46S-12M50

67.070.0

54.054.0

25.028.0

38.041.0

62.065.0

0.9410.968

1.11/16

1.13/16

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.Ibs.

9/165/8

11/16

S-1209S-1210S-1211

1.1311.1811.211

1.6541.6541.654

0.4720.4720.472

0.8270.8270.827

1.7721.7721.772

0.6200.6700.690

3/413/167/8

S-1212S-1213S-1214

1.2601.4171.535

1.6541.6541.654

0.4720.5120.512

0.8270.9450.945

1.7721.8901.890

0.6700.7400.770

15/161

1.1/16

S-1215S-1216S-1217

1.5351.6141.732

1.6541.7321.732

0.5910.5910.630

0.9450.9450.945

1.8901.8901.890

0.7500.8300.870

1.1/81.3/161.1/4

S-1218S-1219S-1220

1.8501.8801.929

1.7321.7321.732

0.7090.7090.709

1.0631.0631.063

2.0082.0082.008

0.9700.9701.000

1.5/161.3/8

1.7/16

S-1221S-1222S-1223

2.0472.0762.106

1.7322.1262.126

0.7870.7870.787

1.1811.1811.181

2.1262.1262.126

1.1201.4001.400

1.1/21.9/161.5/8

S-1224S-1225S-1226

2.3442.3522.441

2.1262.1262.126

0.9060.9060.984

1.3781.3781.378

2.3232.3232.323

1.6601.7601.790

1.3/4S-1227S-1228S-1229

2.4802.6882.688

2.1262.1262.126

0.9840.9840.984

1.4961.4961.496

2.4412.4412.441

1.9002.0702.070

1.7/82

S-1230S-1232

2.7062.981

2.1262.441

1.1021.181

1.6141.732

2.5592.677

2.1302.780

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

171921

S-12M17LS-12M19LS-12M21L

30.032.036.0

42.042.042.0

12.012.013.0

61.061.061.0

85.085.085.0

0.4630.4790.542

222324

S-12M22LS-12M23LS-12M24L

37.039.040.0

42.042.042.0

13.013.015.0

61.061.061.0

85.085.085.0

0.5510.5860.595

262728

S-12M26LS-12M27LS-12M28L

41.043.044.0

42.043.044.0

15.016.016.0

66.066.066.0

90.090.090.0

0.6180.6740.699

303233

S-12M30LS-12M32LS-12M33L

47.049.050.0

44.044.044.0

18.018.018.0

66.066.066.0

90.090.090.0

0.7690.7980.812

343638

S-12M34LS-12M36LS-12M38L

52.054.057.0

44.054.054.0

20.020.023.0

66.066.066.0

90.090.090.0

0.8691.0341.125

414243

S-12M41LS-12M42LS-12M43L

61.062.063.0

54.054.054.0

23.025.025.0

66.066.066.0

90.090.090.0

1.2291.2411.255

4650

S-12M46LS-12M50L

67.070.0

54.054.0

25.028.0

76.076.0

100.0100.0

1.5631.573

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.Ibs.

9/165/8

11/16

S-1209LS-1210LS-12011L

1.1311.1811.211

1.6541.6541.654

0.4720.4720.472

2.4022.4022.402

3.3463.3463.346

0.9701.0201.040

3/413/167/8

S-1212LS-1213LS-1214L

1.2601.4171.535

1.6541.6541.654

0.4720.5120.512

2.4022.4022.402

3.3463.3463.346

1.0501.1901.290

15/161

1.1/16

S-1215LS-1216LS-1217L

1.5751.6141.693

1.6541.6541.693

0.5910.5910.630

2.4022.5982.598

3.3463.5433.543

1.3101.3601.480

1.1/81.3/161.1/4

S-1218LS-1219LS-1220L

1.8501.8801.929

1.7321.7321.732

0.7090.7090.709

2.5982.5982.598

3.5433.5433.543

1.6901.7101.760

1.5/161.3/8

1.7/16

S-1221LS-1222LS-1223L

2.0472.1262.156

1.7322.1262.126

0.7870.7870.787

2.5982.5982.598

3.5433.5433.543

1.9102.2802.300

1.1/21.9/161.5/8

S-1224LS-1225LS-1226L

2.2442.4022.441

2.1262.1262.126

0.9060.9060.984

2.5982.5982.598

3.5433.5433.543

2.4702.7002.730

1.11/161.3/4

1.13/16

S-1227LS-1228LS-1229L

2.4802.6382.456

2.1262.1262.126

0.9840.9841.102

2.5982.9922.992

3.5433.9373.937

2.7603.4403.410

1.7/82

S-1230LS-1232L

2.4562.731

2.1262.441

1.1021.181

2.9922.992

3.9373.937

3.4104.180

IMPACT SOCKETS









A/F A/FT

OAL

D1 D2

C

43 “

IMPACT SOCKETS

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

171921


32.033.036.0

44.044.044.0

12.012.013.0

20.020.023.0

45.045.048.0

0.3700.3700.380

222324


37.041.041.0

44.044.044.0

13.013.016.0

23.023.023.0

48.048.048.0

0.3800.3900.400

262728


41.043.045.0

44.044.044.0

16.016.018.0

23.023.023.0

48.048.048.0

0.4000.4000.410

303233


47.050.050.0

44.044.044.0

18.019.019.0

27.027.030.0

52.052.055.0

0.4250.4600.480

343638


52.054.057.0

44.044.044.0

20.020.020.0

30.031.034.0

55.056.059.0

0.5000.5750.600

414243


61.064.064.0

44.044.044.0

22.022.022.0

34.034.039.0

59.059.064.0

0.6250.6250.625

4650

12M46DH12M50DH

67.073.0

54.054.0

23.025.0

39.042.0

64.067.0

0.8251.300

5560

12M55DH12M60DH

78.084.0

54.054.0

28.030.0

46.050.0

71.075.0

1.8502.050

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

9/165/8

11/16

1209DH1210DH1211DH

1.0231.1811.259

1.7321.7321.732

0.4720.4720.472

0.7710.7710.771

1.7711.7711.771

0.7000.8150.815

3/413/167/8

1212DH1213DH1214DH

1.2991.4171.456

1.7321.7321.732

0.4720.5110.511

0.7710.8890.889

1.7711.8891.889

0.8150.8350.835

15/161

1.1/16

1215DH1216DH1217DH

1.6141.6141.629

1.7321.7321.732

0.6290.6290.629

0.8890.8890.889

1.8891.8891.889

0.8800.8800.880

1.1/81.3/161.1/4

1218DH1219DH1220DH

1.7711.8501.968

1.7321.7321.732

0.7080.7080.748

0.8891.0471.047

1.8892.0472.047

0.9000.9351.055

1.5/161.3/8

1.7/16

1221DH1222DH1223DH

2.0472.1252.125

1.7321.7321.732

0.7480.7870.787

1.1651.1651.204

2.1652.1652.204

1.1001.2651.265

1.1/21.9/161.5/8

1224DH1225DH1226DH

2.2442.4012.401

1.7321.7321.732

0.7870.7870.866

1.3221.3221.322

2.3222.3222.322

1.3201.3751.375

1.11/161.3/4

1.13/16

1227DH1228DH1229DH

2.5192.5192.637

1.7321.7321.732

0.8660.8660.905

1.5191.5191.519

2.5192.5192.519

1.3751.5401.815

1.7/82

1230DH1232DH

2.7552.874

2.1252.125

0.9050.984

1.5191.637

2.5192.637

1.8153.080

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

323334

12M32DS12M33DS12M34DS

62.065.065.0

44.044.044.0

19.019.020.0

27.027.030.0

52.052.055.0

0.5100.5400.550

363839


68.070.073.0

44.054.054.0

20.020.020.0

30.030.030.0

55.055.055.0

0.6100.7000.725

404142


73.075.078.0

54.054.054.0

20.022.022.0

30.033.033.0

55.058.058.0

0.7250.7500.750

4346

12M43DS12M46DS

78.083.0

54.054.0

22.023.0

33.035.0

58.060.0

0.7500.940

1.11/16

1.13/16

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

1.1/41.5/161.3/8

1220DS1221DS1222DS

2.4402.5592.677

1.7321.7321.732

0.7480.7480.787

1.0471.0471.165

2.0472.0472.165

1.1201.2101.340

1.7/161.1/2

1.9/16

1223DS1224DS1225DS

2.7552.7552.874

2.1252.1252.125

0.7870.7870.787

1.1651.1651.166

2.1652.1652.165

1.4951.5401.595

1.5/8

1.3/4

1226DS1227DS1228DS

2.9523.0703.149

2.1252.1252.125

0.7870.8660.866

1.2831.2831.283

2.2832.2832.283

1.6501.6501.760

1.7/81229DS1230DS

3.2673.346

2.1252.125

0.9050.905

1.3621.362

2.3622.362

2.0702.110

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

323334

12M32LDS12M33LDS12M34LDS

62.065.065.0

44.044.044.0

19.019.020.0

65.065.065.0

90.090.090.0

0.9100.9400.950

363839


68.070.073.0

44.054.054.0

20.020.020.0

65.065.065.0

90.090.090.0

1.0101.1001.125

404142


73.075.078.0

54.054.054.0

20.022.022.0

65.065.070.0

90.090.095.0

1.1251.1501.150

4346

12M43LDS12M46LDS

78.083.0

54.054.0

22.023.0

70.075.0

95.0100.0

1.1501.340

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

1.1/41.5/161.3/8

1220LDS1221LDS1222LDS

2.4402.5592.677

1.7321.7321.732

0.7480.7480.787

2.5432.5432.543

3.5433.5433.543

2.0002.0902.220

1.7/161.1/2

1.9/16


2.7552.7552.874

2.1252.1252.125

0.7870.7870.787

2.5432.5432.543

3.5433.5433.543

2.3752.4202.475

1.5/81.11/161.3/4


2.9523.0703.149

2.1252.1252.125

0.7870.8660.866

2.5432.7402.740

3.5433.7403.740

2.5302.5302.685

1.13/161.7/8

1229LDS1230LDS

3.2673.346

2.1252.125

0.9050.905

2.9372.937

3.9373.937

2.9503.050


METRIC BISQUARE FRACTIONAL BISQUARE

FRACTIONAL DEEP BISQUAREMETRIC DEEP BISQUARE

43 “


mmMODEL

NO.D1

mmD2mm

Tmm

Cmm

OALmm

Wt.Kg.

A/F

171921

S-12M17TS-12M19TS-12M21T

27.930.432.9

42.042.042.0

12.012.013.0

21.021.024.0

45.045.048.0

0.2920.2960.312

222324

S-12M22TS-12M23TS-12M24T

34.335.336.8

42.042.042.0

13.013.015.0

24.024.024.0

48.048.048.0

0.3170.3180.322

262728

S-12M26TS-12M27TS-12M28T

38.540.542.0

42.042.042.0

15.016.016.0

24.024.024.0

48.048.048.0

0.3200.3290.334

303233

S-12M30TS-12M32TS-12M33T

44.446.848.0

44.044.044.0

18.018.018.0

27.027.027.0

51.051.051.0

0.3910.4100.416

343638

S-12M34TS-12M36TS-12M38T

49.351.954.4

44.044.054.0

20.020.023.0

30.030.035.0

54.054.059.0

0.4490.4770.684

4142

S-12M41TS-12M42T

58.459.4

54.054.0

23.025.0

35.035.0

59.059.0

0.7360.737

4346

S-12M43TS-12M46T

60.464.0

54.054.0

25.025.0

38.038.0

62.062.0

0.7780.833

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

11/163/4

13/16

S-1211TS-1212TS-1213T

1.0781.1971.295

1.6541.6541.654

0.4720.4720.512

0.8270.8270.945

1.7721.7721.890

0.6400.6500.690

7/815/16

1

S-1214TS-1215TS-1216T

1.3901.4491.516

1.6541.6541.654

0.5120.5910.591

0.9450.9450.945

1.8901.8901.890

0.7000.7100.710

1.1/161.1/8

1.3/16

S-1217TS-1218TS-1219T

1.5941.7481.778

1.6541.7321.732

0.6300.7090.709

0.9451.0631.063

1.8902.0082.008

0.7200.8600.880

1.1/41.5/161.3/8

S-1220TS-1221TS-1222T

1.8431.9412.043

1.7321.7321.732

0.7090.7870.787

1.0631.1811.181

2.0082.1262.126

0.9000.9901.050

1.7/161.1/2

1.9/16

S-1223TS-1224TS-1225T

2.0732.1422.299

1.7322.1262.126

0.7870.9060.906

1.1811.3781.378

2.1262.3232.323

1.0801.5001.620

1.5/81.11/16

S-1226TS-1227T

2.3782.378

2.1262.126

0.9840.984

1.4961.496

2.4412.441

1.7101.710

1.3/41.13/16

S-1228TS-1229T

2.5002.530

2.1262.126

0.9840.984

1.4961.496

2.4412.441

1.8101.840

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

171921

S-12M17LTS-12M19LTS-12M21LT

27.930.432.9

42.042.042.0

12.012.013.0

61.061.061.0

85.085.085.0

0.4210.4450.470

222324


34.335.336.8

42.042.042.0

13.013.015.0

61.061.061.0

85.085.085.0

0.4860.4940.512

262728


38.540.542.0

42.042.042.0

15.016.016.0

66.066.066.0

90.090.090.0

0.5450.6430.621

303233


44.446.848.0

44.044.044.0

18.018.018.0

66.066.066.0

90.090.090.0

0.6820.7260.744

343638


49.351.954.4

44.044.054.0

20.020.023.0

66.066.066.0

90.090.090.0

0.7670.8221.020

4142

S-12M41LTS-12M42LT

58.459.4

54.054.0

23.025.0

66.066.0

90.090.0

1.1031.092

4346

S-12M43LTS-12M46LT

60.464.0

54.054.0

25.025.0

66.066.0

90.090.0

1.0951.169

1.11/16

1.13/16

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

11/163/4

13/16

S-1211LTS-1212LTS-1213LT

1.1281.1971.295

1.6541.6541.654

0.4720.4720.512

2.4022.4022.402

3.3463.3463.346

0.9500.9801.030

7/815/16

1

S-1214LTS-1215LTS-1216LT

1.3901.4491.516

1.6541.6541.654

0.5120.5910.591

2.4022.4022.598

3.3463.3463.543

1.0901.1301.200

1.1/161.1/8

1.3/16

S-1217LTS-1218LTS-1219LT

1.5941.7481.778

1.6541.7321.732

0.6300.7090.709

2.5982.5982.598

3.5433.5433.543

1.4101.5001.530

1.1/41.5/161.3/8

S-1220LTS-1221LTS-1222LT

1.8431.9412.043

1.7321.7321.732

0.7090.7870.787

2.5982.5982.598

3.5433.5433.543

1.6001.6901.810

1.7/161.1/2

1.9/16

S-1223LTS-1224LTS-1225LT

2.0732.1422.299

1.7322.1262.126

0.7870.9060.906

2.5982.5982.598

3.5433.5433.543

1.8302.2402.430

1.5/8 S-1226LTS-1227LT

2.3782.378

2.1262.126

0.9840.984

2.5982.598

3.5433.543

2.4102.410

1.3/4 S-1228LTS-1229LT

2.5202.550

2.1262.126

0.9840.984

2.5982.598

3.5433.543

2.5702.600









A/F A/FT

OAL

D1 D2

C

IMPACT ACCESSORIES

43 “

LENGTHHEX A/F

mmMODEL

NO.BIT OAL

mmWtKg.

81012

12M08H12M10H12M12H

12.018.025.0

62.065.075.0

0.2400.2500.300

141719

12M14H12M17H12M19H

25.035.035.0

75.088.088.0

0.3000.4500.450

222427

12M22H12M24H12M27H

40.045.045.0

93.093.0100.0

0.5000.5500.700

HEX A/Finch

MODELNO.

BITLENGTH

OALinch

Wtlbs.

3/87/161/2

1206H1207H1208H

0.7080.7080.984

2.5592.5592.952

0.5500.5500.660

9/165/83/4

1209H1210H1212H

0.9841.3771.377

2.9523.4643.464

0.6600.7150.990

13/167/81

1213H1214H1216H

1.5741.5741.771

3.6613.6613.937

1.1001.2101.210

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

WtKg. (lbs.)

75 (3")125 (5")175 (7")

E1203E1205E1207 25.0 (0.984) 44.0 (1.732)

0.60 (1.32)0.80 (1.76)1.00 (2.20)

250 (10")330 (13")

E1210E1213

1.20 (2.64)1.50 (3.30)

3/4" F X 1/2" M

SIZEMODEL


OALmm (inch)

WtKg. (lbs.)

3/4" F X 1" MA1208A1216

44.0 (1.732)56.0 (2.204)65.0 (2.559)

0.33 (0.72)0.45 (0.99)

SQUAREDRIVE

MODELNO.

DIAmm (inch)

OALmm (inch)

WtKg. (lbs.)

3/4" U1212 44.0 (1.732) 94.0 (3.700) 0.60 (1.32)

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

WtKg. (lbs.)

75 (3")125 (5")175 (7")

S1203S1205S1207

25.0 (0.984) 19.0 (0.750)

0.40 (0.88)0.55 (1.21)0.75 (1.65)

250 (10")330 (13")410 (16")

S1210S1213S1216

0.95 (2.09)1.05 (2.31)1.60 (3.50)

SIZEMODEL


OALmm (inch)

WtKg. (lbs.)

3/4" F X 1/2" F3/4" F X 1" F

AN1208AN1212

44.0 (1.732)55.0 (2.165)63.0 (2.480)

0.45 (0.99)0.57 (1.25)


REGULAR EXTENSIONS

SQUARE ADAPTORS

UNIVERSAL JOINT



1“IMPACT SOCKETS

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

2.15/16 S-1647 4.094 3.386 1.575 2.205 3.504 6.77

3/413/167/8

S-1612S-1613S-1614

1.4171.4961.575

2.0082.0082.008

0.5510.5510.551

0.9840.9840.984

2.1652.1652.165

1.131.131.14

15/161

1.1/16

S-1615S-1616S-1617

1.6541.7721.811

2.0082.0082.008

0.6300.6300.630

1.0631.0631.063

2.2442.2442.244

1.201.241.25

1.1/81.3/161.1/4

S-1618S-1619S-1620

1.8901.9692.047

2.0082.1262.126

0.7090.7090.709

1.1421.1421.142

2.3232.3232.323

1.291.451.49

1.5/161.3/8

1.7/16

S-1621S-1622S-1623

2.1262.1262.244

2.1262.1262.126

0.7870.7870.787

1.2201.2201.220

2.4022.4022.402

1.541.511.68

1.1/21.9/161.5/8

S-1624S-1625S-1626

2.3232.3622.520

2.1262.1262.126

0.8660.8660.945

1.3391.3391.417

2.5202.5202.598

1.861.882.13

1.11/161.3/4

1.13/16

S-1627S-1628S-1629

2.5592.6772.677

2.1262.1262.126

0.9450.9451.024

1.4171.4171.496

2.5982.5982.677

2.152.272.25

1.7/81.15/16

2

S-1630S-1631S-1632

2.7952.7952.963

2.1262.1262.126

1.0241.0241.102

1.4961.4961.575

2.6772.6772.756

2.372.372.67

2.1/162.1/8

2.3/16

S-1633S-1634S-1635

2.9633.1103.150

2.1262.4412.441

1.1021.1021.181

1.5751.5751.732

2.7562.7562.913

2.673.133.21

2.1/42.5/162.3/8

S-1636S-1637S-1638

3.3073.3073.405

2.4412.4412.441

1.1811.1811.260

1.7321.7321.850

2.9132.9133.031

3.503.503.77

2.7/162.1/2

2.9/16

S-1639S-1640S-1641

3.5433.5433.711

2.4412.4412.441

1.3391.3391.417

1.9291.9292.008

3.1103.1103.189

4.174.174.38

2.5/82.11/162.3/4

S-1642S-1643S-1644

3.7113.8983.898

2.4413.3863.386

1.4171.4961.496

2.0082.1262.126

3.1893.3073.307

4.386.196.19

2.13/162.7/8

S-1645S-1646

3.8984.094

3.3863.386

1.4961.575

2.1262.205

3.3073.504

6.196.77

33.1/163.1/8

S-1648S-1649S-1650

4.0944.4254.425

3.3863.3863.386

1.5751.6541.654

2.2052.2832.283

3.5043.5833.583

6.777.807.80

3.3/163.1/4

3.5/16

S-1651S-1652S-1653

4.4254.6514.742

3.3863.3863.386

1.6541.7321.732

2.2832.3622.362

3.5833.6613.661

7.808.138.48

3.3/83.7/163.1/2

S-1654S-1655S-1656

4.7424.8034.803

3.3863.3863.386

1.7321.8111.811

2.3622.4412.441

3.6613.7403.740

8.488.448.44

3.5/83.3/43.7/8

S-1658S-1660S-1662

5.1185.1185.276

4.1734.1734.173

1.8901.8901.969

2.5202.5202.598

3.8193.8193.898

11.2911.2911.44

44.1/84.1/4

S-1664S-1666S-1668

5.5915.5915.727

4.1734.1734.173

2.0472.0472.126

2.6772.6772.835

3.9763.9764.134

12.8212.8213.05

4.3/84.1/2

S-1670S-1672

6.0246.024

5.0005.000

2.2052.205

2.8352.835

4.1344.134

16.2016.20

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

192021

S-16M19S-16M20S-16M21

36.036.038.0

51.051.051.0

14.014.014.0

25.025.025.0

55.055.055.0

0.510.500.52

222324

S-16M22S-16M23S-16M24

40.040.042.0

51.051.051.0

14.014.016.0

25.025.027.0

55.055.057.0

0.530.520.55

252627

S-16M25S-16M26S-16M27

43.045.046.0

51.051.051.0

16.016.016..0

27.027.027.0

57.057.057.0

0.550.560.57

282930

S-16M28S-16M29S-16M30

47.048.049.0

51.051.054.0

16.018.018.0

27.029.029.0

57.059.059.0

0.570.590.66

313233

S-16M31S-16M32S-16M33

50.052.054.0

54.054.054.0

18.018.018.0

29.029.029.0

59.059.059.0

0.660.680.69

343536

S-16M34S-16M35S-16M36

54.054.057.0

54.054.054.0

20.020.020.0

31.031.031.0

61.061.061.0

0.700.690.78

373839

S-16M37S-16M38S-16M39

57.059.060.0

54.054.054.0

20.022.022.0

31.034.034.0

61.064.064.0

0.760.840.88

404142

S-16M40S-16M41S-16M42

60.062.064.0

54.054.054.0

22.022.024.0

34.034.036.0

64.064.066.0

0.850.900.97

434445

S-16M43S-16M44S-16M45

65.066.068.0

54.054.054.0

24.024.024.0

36.036.036.0

66.066.066.0

0.980.981.03

464748

S-16M46S-16M47S-16M48

68.071.071.0

54.054.054.0

26.026.026.0

38.038.038.0

68.068.068.0

1.021.121.08

495051

S-16M49S-16M50S-16M51

74.074.077.0

54.054.062.0

28.028.028.0

40.040.040.0

70.070.070.0

1.171.171.40

525455

S-16M52S-16M54S-16M55

77.079.079.0

62.062.062.0

28.028.030.0

40.040.044.0

70.070.074.0

1.401.421.45

565758

S-16M56S-16M57S-16M58

80.084.084.0

62.062.062.0

30.030.030.0

44.044.044.0

74.074.074.0

1.461.591.59

596062

S-16M59S-16M60S-16M62

87.087.090.0

62.062.062.0

32.032.034.0

47.047.049.0

77.077.079.0

1.751.751.89

657075

S-16M65S-16M70S-16M75

93.099.0104.0

62.086.086.0

36.038.040.0

51.054.056.0

81.084.089.0

1.992.813.08

808590

S-16M80S-16M85S-16M90

112.0119.0122.0

86.086.086.0

42.044.046.0

58.060.062.0

91.093.095.0

3.543.853.84

95100105

S-16M95S-16M100S-16M105

130.0134.0142.0

106.0106.0106.0

48.050.052.0

64.066.068.0

97.099.0101.0

5.135.205.83

110115

S-16M110S-16M115

147.0153.0

106.0127.0

54.056.0

72.072.0

105.0105.0

6.007.36








A/F A/FT

OAL

D1 D2

C

IMPACT SOCKETS1“

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

192021

S-16M19LS-16M20LS-16M21L

36.036.038.0

51.051.051.0

14.014.014.0

72.072.072.0

102.0102.0102.0

0.790.760.81

222324

S-16M22LS-16M23LS-16M24L

40.040.042.0

51.051.051.0

14.014.016.0

72.072.072.0

102.0102.0102.0

0.860.840.89

252627

S-16M25LS-16M26LS-16M27L

43.045.046.0

51.051.051.0

16.016.016.0

72.072.072.0

102.0102.0102.0

0.900.950.97

282930

S-16M28LS-16M29LS-16M30L

47.048.049.0

51.051.054.0

16.018.018.0

72.072.072.0

102.0102.0102.0

0.980.991.07

313233

S-16M31LS-16M32LS-16M33L

50.052.054.0

54.054.054.0

18.018.018.0

72.072.072.0

102.0102.0102.0

1.091.141.19

343536

S-16M34LS-16M35LS-16M36L

54.054.057.0

54.054.054.0

20.020.020.0

72.072.069.0

102.0102.0102.0

1.161.131.31

373839

S-16M37LS-16M38LS-16M39L

57.059.060.0

54.054.054.0

20.022.022.0

69.069.069.0

102.0102.0102.0

1.281.381.41

404142

S-16M40LS-16M41LS-16M42L

60.062.064.0

54.054.054.0

22.022.024.0

69.069.069.0

102.0102.0102.0

1.371.451.53

434445

S-16M43LS-16M44LS-16M45L

66.066.068.0

54.054.054.0

24.024.024.0

69.069.069.0

102.0102.0102.0

1.611.561.65

464748

S-16M46LS-16M47LS-16M48L

68.071.071.0

54.054.054.0

26.026.026.0

69.067.067.0

102.0102.0102.0

1.591.731.68

495051

S-16M49LS-16M50LS-16M51L

74.074.077.0

54.054.062.0

28.028.028.0

80.080.075.0

110.0110.0110.0

1.961.962.23

525455

S-16M52LS-16M54LS-16M55L

77.079.079.0

62.062.062.0

28.028.030.0

75.075.075.0

110.0110.0110.0

2.232.262.19

565758

S-16M56LS-16M57LS-16M58L

80.084.084.0

62.062.062.0

30.030.030.0

75.075.075.0

110.0110.0110.0

2.212.422.42

596062

S-16M59LS-16M60LS-16M62L

87.087.090.0

62.062.062.0

32.032.032.0

80.080.080.0

115.0115.0115.0

2.712.712.86

657075

S-16M65LS-16M70LS-16M75L

93.099.0104.0

62.062.086.0

34.036.038.0

80.085.085.0

115.0120.0120.0

2.903.284.17

808590

S-16M80LS-16M85LS-16M90L

112.0119.0122.0

86.086.086.0

40.042.044.0

85.090.090.0

120.0125.0125.0

4.735.275.15

95100105

S-16M95LS-16M100LS-16M105L

130.0134.0142.0

106.0106.0106.0

46.048.050.0

95.095.095.0

130.0130.0130.0

6.916.887.58

110115

S-16M110LS-16M115L

147.0153.0

106.0127.0

52.054.0

105.0105.0

140.0140.0

8.389.81

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

3/413/167/8

S-1612LS-1613LS-1614L

1.4171.4961.575

2.0082.0082.008

0.5510.5510.551

2.8352.8352.835

4.0164.0164.016

1.731.781.85

15/161

1.1/16

S-1615LS-1616LS-1617L

1.6541.7721.811

2.0082.0082.008

0.6300.6300.630

2.8352.8352.835

4.0164.0164.016

1.952.102.13

1.1/81.3/161.1/4

S-1618LS-1619LS-1620L

1.8901.9692.047

2.0082.1262.126

0.7090.7090.709

2.8352.8352.835

4.0164.0164.016

2.182.392.51

1.5/161.3/8

1.7/16

S-1621LS-1622LS-1623L

2.1262.1262.244

2.1262.1262.126

0.7870.7870.787

2.8352.8352.717

4.0164.0164.016

2.562.492.82

1.1/21.9/161.5/8

S-1624LS-1625LS-1626L

2.3232.3622.520

2.1262.1262.126

0.8660.8660.945

2.7172.7172.717

4.0164.0164.016

3.033.023.36

1.11/161.3/4

1.13/16

S-1627LS-1628LS-1629L

2.5962.6772.677

2.1262.1262.126

0.9450.9451.024

2.7172.7172.717

4.0164.0164.016

3.533.623.49

1.7/81.15/16

2

S-1630LS-1631LS-1632L

2.7952.7952.963

2.1262.1262.126

1.0241.0241.102

2.6382.6383.150

4.0164.0164.331

3.693.694.41

2.1/162.1/8

2.3/16

S-1633LS-1634LS-1635L

2.9233.1103.150

2.1262.4412.441

1.1021.1811.181

3.1502.9532.953

4.3314.3314.331

4.414.814.85

2.1/42.5/162.3/8

S-1636LS-1637LS-1638L

3.3072.5983.405

2.4412.1262.441

1.1810.9451.260

2.9532.7173.150

4.3314.0164.528

5.323.446.04

2.7/162.1/2

2.9/16

S-1639LS-1640LS-1641L

3.5432.7963.741

2.4412.1262.441

1.2601.0241.339

3.1502.6383.150

4.5284.0164.528

6.303.816.38

2.5/82.11/162.3/4

S-1642LS-1643LS-1644L

3.7413.0313.898

2.4412.4412.441

1.3391.1021.417

3.1502.9533.346

4.5284.3314.724

6.384.907.22

2.13/162.7/8

2.15/16

S-1645LS-1646LS-1647L

3.8984.0944.094

2.4413.3863.386

1.4171.4964.496

3.3463.3463.346

4.7244.7244.724

7.229.189.18

33.1/163.1/8

S-1648LS-1649LS-1650L

4.0944.4254.425

3.3863.3863.386

1.4961.5751.575

3.3463.3463.346

4.7244.7244.724

9.1810.4010.40

3.3/163.1/4

3.5/16

S-1651LS-1652LS-1653L

4.4254.6514.751

3.3863.3863.386

1.5751.6541.654

3.3463.5433.543

4.7244.9214.921

10.4010.8411.60

3.3/83.7/163.1/2

S-1654LS-1655LS-1656L

4.7514.8034.803

3.3863.3863.386

1.6541.7321.732

3.5433.5433.543

4.9214.9214.921

11.6011.4511.45

3.5/83.3/43.7/8

S-1658LS-1660LS-1662L

5.1185.1185.276

4.1734.1734.173

1.8111.8111.890

3.7403.7403.740

5.1185.1185.118

15.2015.2015.14

44.1/84.1/4

S-1664LS-1666LS-1668L

5.5915.5915.787

4.1734.1734.173

1.9691.9692.047

3.7403.7404.134

5.1185.1185.512

16.6816.6818.58

4.3/84.1/2

S-1670LS-1672L

6.0246.024

5.0005.000

2.1262.126

4.1344.134

5.5125.512

21.5921.59








A/F A/FT

OAL

D1 D2

C

IMPACT SOCKETS1“

3/4 1612DH 1.417 2.008 0.551 0.984 2.165 1.13

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

13/167/8

1613DH1614DH

1.4961.575

2.0082.008

0.5510.551

0.9840.984

2.1652.165

1.131.14

15/161

1.1/16

1615DH1616DH1617DH

1.6541.7721.811

2.0082.0082.008

0.6300.6300.630

1.0631.0631.063

2.2442.2442.244

1.201.241.25

1.1/81.3/161.1/4

1618DH1619DH1620DH

1.8901.9692.047

2.0082.1262.126

0.7090.7090.709

1.1421.1421.142

2.3232.3232.323

1.291.451.49

1.5/161.3/8

1.7/16

1621DH1622DH1623DH

2.1262.1262.244

2.1262.1262.126

0.7870.7870.787

1.2201.2201.220

2.4022.4022.402

1.541.511.68

1.1/21.9/161.5/8

1624DH1625DH1626DH

2.3232.3622.520

2.1262.1262.126

0.8660.8660.945

1.3391.3391.417

2.5202.5202.598

1.861.882.13

1.11/161.3/4

1.13/16

1627DH1628DH1629DH

2.5592.6772.677

2.1262.1262.126

0.9450.9451.024

1.4171.4171.496

2.5982.5982.677

2.152.272.25

1.7/81.15/16

2

1630DH1631DH1632DH

2.7952.7952.963

2.1262.1262.126

1.0241.0241.102

1.4961.4961.575

2.6772.6772.756

2.372.372.67

2.1/162.1/8

2.3/16

1633DH1634DH1635DH

2.9633.1103.150

2.1262.4412.441

1.1021.1021.181

1.5751.5751.732

2.7562.7562.913

2.673.133.21

2.1/42.5/162.3/8

1636DH1637DH1638DH

3.3073.3073.405

2.4412.4412.441

1.1811.1811.260

1.7321.7321.850

2.9132.9133.031

3.503.503.77

2.7/162.1/2

2.9/16

1639DH1640DH1641DH

3.5433.5433.711

2.4412.4412.441

1.3391.3391.417

1.9291.9292.008

3.1103.1103.189

4.174.174.38

2.5/82.11/162.3/4

1642DH1643DH1644DH

3.7113.8983.898

2.4413.3863.386

1.4171.4961.496

2.0082.1262.126

3.1893.3073.307

4.386.196.19

2.13/162.7/8

2.15/16

1645DH1646DH1647DH

3.8984.0944.094

3.3863.3863.386

1.4961.5751.575

2.1262.2052.205

3.3073.5043.504

6.196.776.77

33.1/163.1/8

1648DH1649DH1650DH

4.0944.4254.425

3.3863.3863.386

1.5751.6541.654

2.2052.2832.283

3.5043.5833.583

6.777.807.80

3.3/163.1/4

3.5/16

1651DH1652DH1653DH

4.4254.6514.742

3.3863.3863.386

1.6541.7321.732

2.2832.3622.362

3.5833.6613.661

7.808.138.48

3.3/83.7/163.1/2

1654DH1655DH1656DH

4.7424.8034.803

3.3863.3863.386

1.7321.8111.811

2.3622.4412.441

3.6613.7403.740

8.488.448.44

3.5/83.3/43.7/8

1658DH1660DH1662DH

5.1185.1185.276

4.1734.1734.173

1.8901.8901.969

2.5202.5202.598

3.8193.8193.898

11.2911.2911.44

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

192021


36.036.038.0

51.051.051.0

14.014.014.0

25.025.025.0

55.055.055.0

0.510.500.52

222324


40.040.042.0

51.051.051.0

14.014.016.0

25.025.027.0

55.055.057.0

0.530.520.55

252627


43.045.046.0

51.051.051.0

16.016.016..0

27.027.027.0

57.057.057.0

0.550.560.57

282930


47.048.049.0

51.051.054.0

16.018.018.0

27.029.029.0

57.059.059.0

0.570.590.66

313233


50.052.054.0

54.054.054.0

18.018.018.0

29.029.029.0

59.059.059.0

0.660.680.69

343536


54.054.057.0

54.054.054.0

20.020.020.0

31.031.031.0

61.061.061.0

0.700.690.78

373839


57.059.060.0

54.054.054.0

20.022.022.0

31.034.034.0

61.064.064.0

0.760.840.88

404142


60.062.064.0

54.054.054.0

22.022.024.0

34.034.036.0

64.064.066.0

0.850.900.97

434445


65.066.068.0

54.054.054.0

24.024.024.0

36.036.036.0

66.066.066.0

0.980.981.03

464748


68.071.071.0

54.054.054.0

26.026.026.0

38.038.038.0

68.068.068.0

1.021.121.08

495051


74.074.077.0

54.054.062.0

28.028.028.0

40.040.040.0

70.070.070.0

1.171.171.40

525455


77.079.079.0

62.062.062.0

28.028.030.0

40.040.044.0

70.070.074.0

1.401.421.45

565758


80.084.084.0

62.062.062.0

30.030.030.0

44.044.044.0

74.074.074.0

1.461.591.59

596062


87.087.090.0

62.062.062.0

32.032.034.0

47.047.049.0

77.077.079.0

1.751.751.89

657075


93.099.0104.0

62.086.086.0

36.038.040.0

51.054.056.0

81.084.089.0

1.992.813.08

8085

16M80DH16M85DH

112.0119.0

86.086.0

42.044.0

58.060.0

91.093.0

3.543.85

9095

16M90DH16M95DH

122.0130.0

86.0106.0

46.048.0

62.064.0

95.097.0

3.845.13


IMPACT SOCKETS1“

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

1.1/41.5/161.3/8

1620DS1621DS1622DS

2.5592.5592.677

2.1252.1252.125

0.8260.8260.826

1.1411.1411.220

2.2832.2832.401

1.891.891.98

1.7/161.1/2

1.9/16

1623DS1624DS1625DS

2.7952.9132.834

2.1252.1252.125

0.9840.9840.984

1.2201.3771.377

2.4012.5592.559

2.022.532.55

1.5/81.11/161.3/4

1626DS1627DS1628DS

3.0313.1493.267

2.1252.1252.125

1.1021.1021.102

1.3771.5741.574

2.5592.7552.755

2.553.303.30

1.13/161.7/8

2

1629DS1630DS1632DS

3.3853.5033.661

2.1252.1252.125

1.1021.1021.102

1.5741.5741.692

2.7552.7552.874

3.523.523.96

2.1/162.1/8

2.3/16

1633DS1634DS1635DS

3.7793.7793.937

2.1252.1252.125

1.1021.1021.181

1.6921.8501.850

2.8743.0313.031

4.954.956.49

2.1/42.3/82.1/2

1636DS1638DS1640DS

4.0554.1734.409

3.3853.3853.385

1.1811.2591.259

2.0072.0862.204

3.1883.2673.385

6.497.048.47

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

323334


65.065.068.0

54.054.054.0

21.021.021.0

28.028.031.0

58.058.061.0

0.860.860.90

353638


68.071.074.0

54.054.054.0

21.025.025.0

31.031.035.0

61.061.065.0

0.900.921.15

394041


74.077.077.0

54.054.054.0

25.025.028.0

35.035.035.0

65.065.065.0

1.151.161.16

424346


80.080.086.0

54.054.054.0

28.028.028.0

35.040.040.0

65.070.070.0

1.361.461.50

505154


90.093.098.0

54.054.054.0

28.028.028.0

43.043.047.0

73.073.077.0

1.701.802.25

555760


98.0103.0106.0

54.086.086.0

30.030.032.0

47.047.053.0

77.077.083.0

2.252.953.20

65 16M65DS 112.0 86.0 38.0 56.0 86.0 3.65

1.11/16

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

1.1/41.5/161.3/8


2.5592.5592.677

2.1252.1252.125

0.8260.8260.826

3.1493.1493.149

4.3304.3304.330

3.213.213.30

1.7/161.1/2

1.9/16


2.7952.9132.834

2.1252.1252.125

0.9840.9840.984

3.1493.1493.149

4.3304.3304.330

3.343.853.87

1.5/8

1.3/4


3.0313.1493.267

2.1252.1252.125

1.1021.1021.102

3.1493.1493.149

4.3304.3304.330

3.874.754.84

1.13/161.7/8

2


3.3853.5033.661

2.1252.1252.125

1.1021.1021.102

3.1493.1493.149

4.3304.3304.330

5.065.285.72

2.1/162.1/8

2.3/16


3.7793.7793.937

2.1252.1252.125

1.1021.1021.181

3.1493.1493.149

4.3304.3304.330

6.496.498.03

2.1/42.3/82.1/2


4.0554.1734.409

3.3853.3853.385

1.1811.2591.259

3.1493.9373.937

4.3305.1185.118

8.038.8010.01

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

323334


65.065.068.0

54.054.054.0

21.021.021.0

80.080.080.0

110.0110.0110.0

1.461.461.50

353638


68.071.074.0

54.054.054.0

21.025.025.0

80.080.080.0

110.0110.0110.0

1.501.521.75

394041


74.077.077.0

54.054.054.0

25.025.028.0

80.080.080.0

110.0110.0110.0

1.751.761.76

424346


80.080.086.0

54.054.054.0

28.028.028.0

80.080.080.0

110.0110.0110.0

1.962.162.30

505154


90.093.098.0

54.054.054.0

28.028.028.0

80.080.080.0

110.0110.0110.0

2.502.602.95

555760


98.0103.0106.0

54.086.086.0

30.030.032.0

80.080.0100.0

110.0110.0130.0

2.953.654.00

65 16M65LDS 112.0 86.0 38.0 100.0 130.0 4.55

FRACTIONAL BISQUAREMETRIC BISQUARE

METRIC DEEP BISQUARE FRACTIONAL DEEP BISQUARE







A/F A/FT

OAL

D1 D2

C

IMPACT SOCKETS THINWALL1“

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

7/815/16

1

S-1614LTS-1615LTS-1616LT

1.4171.5071.574

2.1252.1252.125

0.6290.6290.629

3.1493.1493.149

4.3304.3304.330

2.212.212.42

1.1/161.1/8

1.3/16

S-1617LTS-1618LTS-1619LT

1.6531.7281.807

2.1252.1252.125

0.6290.6290.826

3.1493.1493.149

4.3304.3304.330

2.532.532.70

1.1/41.5/161.3/8

S-1620LTS-1621LTS-1622LT

1.8891.9682.047

2.1252.1252.125

0.8260.8260.826

3.1493.1493.149

4.3304.3304.330

2.752.952.86

1.7/161.1/2

1.9/16

S-1623LTS-1624LTS-1625LT

2.1252.2002.283

2.1252.1252.125

0.9840.9840.984

3.1493.1493.149

4.3304.3304.330

3.223.303.52

1.5/81.11/16

S-1626LTS-1627LT

2.3582.437

2.1252.125

1.1021.102

3.1493.149

4.3304.330

3.523.52

1.3/41.13/16

S-1628LTS-1629LT

2.5192.594

2.1252.125

1.1021.102

3.1493.149

4.3304.330

3.743.74

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

222324

S-16M22TS-16M23TS-16M24T

35.637.038.0

51.051.051.0

14.014.016.0

25.025.027.0

55.055.057.0

0.480.480.50

252627

S-16M25TS-16M26TS-16M27T

39.540.842.0

51.051.051.0

16.016.016.0

27.027.027.0

57.057.057.0

0.500.510.52

282930

S-16M28TS-16M29TS-16M30T

43.344.545.9

51.051.051.0

16.018.018.0

27.029.029.0

57.059.059.0

0.520.540.55

313233

S-16M31TS-16M32TS-16M33T

47.048.349.5

51.051.051.0

18.018.018.0

29.029.029.0

59.059.059.0

0.550.560.56

343536

S-16M34TS-16M35TS-16M36T

51.052.053.4

51.054.054.0

20.020.020.0

31.031.031.0

61.061.061.0

0.590.650.69

373839

S-16M37TS-16M38TS-16M39T

54.055.957.1

54.054.054.0

20.022.022.0

31.034.034.0

61.064.064.0

0.690.750.78

404142

S-16M40TS-16M41TS-16M42T

58.159.960.9

54.054.054.0

22.022.024.0

34.034.036.0

64.064.066.0

0.790.820.85

4344

S-16M43TS-16M44T

62.063.4

54.054.0

24.024.0

36.036.0

66.066.0

0.860.88

4546

S-16M45TS-16M46T

64.665.9

54.054.0

24.026.0

36.038.0

66.068.0

0.890.93

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

7/815/16

1

S-1614TS-1615TS-1616T

1.4571.5081.606

2.0082.0082.008

0.5510.6300.630

0.9841.0631.063

2.1652.2442.244

1.061.101.12

1.1/161.1/8

1.3/16

S-1617TS-1618TS-1619T

1.6541.7521.850

2.0082.0082.008

0.6300.7090.709

1.0631.1421.142

2.2442.3232.323

1.131.181.21

1.1/41.5/161.3/8

S-1620TS-1621TS-1622T

1.9022.0082.047

2.0082.0082.126

0.7090.7870.787

1.1421.2201.220

2.3232.4022.402

1.231.291.44

1.7/161.1/2

1.9/16

S-1623TS-1624TS-1625T

2.1262.2012.287

2.1262.1262.126

0.7870.8660.866

1.2201.3391.339

2.4022.5202.520

1.511.651.73

1.5/81.11/16

S-1626TS-1627T

2.3982.437

2.1262.126

0.9450.945

1.4171.417

2.5982.598

1.871.89

1.3/41.13/16

S-1628TS-1629T

2.5432.594

2.1262.126

0.9451.024

1.4171.496

2.5982.677

1.972.05

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

222324


35.637.038.3

54.054.054.0

14.014.016.0

80.080.080.0

110.0110.0110.0

1.051.051.05

252627


39.540.842.0

54.054.054.0

16.016.016.0

80.080.080.0

110.0110.0110.0

1.101.101.10

282930


43.344.545.9

54.054.054.0

16.016.021.0

80.080.080.0

110.0110.0110.0

1.151.151.22

313233


47.048.349.5

54.054.054.0

21.021.021.0

80.080.080.0

110.0110.0110.0

1.211.251.27

343536


50.852.053.4

54.054.054.0

21.021.025.0

80.080.080.0

110.0110.0110.0

1.301.301.30

373839


54.055.957.1

54.054.054.0

25.025.025.0

80.080.080.0

110.0110.0110.0

1.451.501.60

404142


58.159.960.9

54.054.054.0

25.028.028.0

80.080.080.0

110.0110.0110.0

1.601.601.65

4344

S-16M43LTS-16M44LT

61.963.4

54.054.0

28.028.0

80.080.0

110.0110.0

1.701.70

4546

S-16M45LTS-16M46LT

64.665.9

54.054.0

28.028.0

80.080.0

110.0110.0

1.702.15



HEX A/Fmm

MODELNO.

BITLENGTH

OALmm

WtKg.

101214

16M10H16M12H16M14H

20.025.025.0

85.090.090.0

0.600.650.75

171922

16M17H16M19H16M22H

30.030.045.0

95.095.0115.0

0.800.800.90

242730

16M24H16M27H16M30H

45.050.050.0

115.0120.0120.0

0.951.151.20

3236

16M32H16M36H

50.050.0

120.0120.0

1.301.30

HEX A/Finch

MODELNO

BITLENGTH

OALinch

Wtlbs.

1/29/165/8

1608H1609H1610H

0.9840.9841.181

3.5433.5433.740

1.431.651.65

3/413/167/8

1612H1613H1614H

1.1811.7711.771

3.7404.5274.527

1.761.871.98

11.1/161.1/8

1616H1617H1618H

1.9681.9681.968

4.7244.7244.724

2.202.202.42

1.3/161.1/4

1619H1620H

1.9681.968

4.7244.724

2.642.86

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

WtKg. (lbs.)

100 (4")125 (5")150 (6")

E1604E1605E1606

36.0 (1.417) 54.0 (2.125)

1.10 (2.42)1.30 (2.86)1.50 (3.30)

180 (7")250 (10")330 (13")

E1607E1610E1613

1.75 (3.85)2.00 (4.40)2.45 (5.39)

110.0 (4.330)

SIZEMODEL


OALmm (inch)

WtKg. (lbs.)

1" F X 3/4" M1" F X 1.1/2" M

1" F X #5 M

A1612A1624A1695

54.0 (2.125)70.0 (2.755)90.0 (3.543)

0.64 (1.40)0.90 (1.98)1.20 (2.64)

117.0 (4.606)

SQUAREDRIVE

MODELNO.

DIAmm (inch)

OALmm (inch)

WtKg. (lbs.)

1" U1616 54.0 (2.125) 1.20 (2.64)

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

WtKg. (lbs.)

75 (3")125 (5")180 (7")

S1603S1605S1607

35.0 (1.377) 25.0 (1.000)

0.70 (1.54)1.00 (2.20)1.45 (3.19)

250 (10")330 (13")

S1610S1613

1.70 (3.74)2.20 (4.84)

380 (15")430 (17")

S1615S1617

2.50 (5.50)3.00 (6.60)

SIZEMODEL


OALmm (inch)

WtKg. (lbs.)

1" F X 3/4" F1" F X 1" F

1" F X 1.1/2" F

AN1612AN1616AN1624

54.0 (2.125)65.0 (2.559)70.0 (2.755)80.0 (3.149)

0.75 (1.65)0.95 (2.09)1.10 (2.42)

IMPACT ACCESSORIES1“


REGULAR EXTENSIONS

SQUARE ADAPTORS

UNIVERSAL JOINT



IMPACT SOCKETS

21 “1

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

323334

S-24M32S-24M33S-24M34

58.059.060.0

82.082.082.0

19.019.020.0

33.033.033.0

75.075.075.0

1.911.911.91

353637

S-24M35S-24M36S-24M37

62.063.064.0

82.082.082.0

21.021.021.0

35.035.035.0

77.077.077.0

1.971.971.97

383940

S-24M38S-24M39S-24M40

65.067.068.0

84.084.084.0

21.022.022.0

35.036.036.0

77.078.078.0

2.072.122.13

414243

S-24M41S-24M42S-24M43

69.070.071.0

84.084.084.0

23.023.024.0

37.037.038.0

79.079.080.0

2.142.152.17

444546

S-24M44S-24M45S-24M46

73.074.075.0

84.084.086.0

24.025.026.0

38.039.040.0

80.081.082.0

2.202.222.35

474849

S-24M47S-24M48S-24M49

77.078.079.0

86.086.086.0

26.026.027.0

40.040.041.0

82.082.083.0

2.382.392.41

505152

S-24M50S-24M51S-24M52

80.081.082.0

86.086.086.0

27.027.028.0

41.041.042.0

83.083.084.0

2.422.422.45

545556

S-24M54S-24M55S-24M56

84.086.088.0

86.086.086.0

28.029.029.0

42.043.043.0

84.085.085.0

2.472.522.71

575859

S-24M57S-24M58S-24M59

88.090.090.0

86.086.086.0

29.030.032.0

43.044.046.0

85.086.088.0

2.672.782.75

606162

S-24M60S-24M61S-24M62

90.094.094.0

86.086.086.0

32.032.032.0

46.046.046.0

88.088.088.0

2.752.922.92

656770

S-24M65S-24M67S-24M70

98.0101.0104.0

86.086.086.0

34.036.038.0

48.050.053.0

90.092.095.0

3.093.263.40

737576

S-24M73S-24M75S-24M76

108.0111.0118.0

86.086.086.0

40.042.044.0

55.059.061.0

97.0101.0103.0

3.714.044.41

808586

S-24M80S-24M85S-24M86

118.0124.0124.0

86.086.086.0

44.048.050.0

61.066.068.0

103.0108.0110.0

4.414.884.82

9095100

S-24M90S-24M95

S-24M100

130.0135.0143.0

106.0106.0106.0

53.056.059.0

71.074.077.0

113.0116.0119.0

6.246.567.48

105110115

S-24M105S-24M110S-24M115

148.0154.0161.0

106.0106.0127.0

62.065.068.0

82.085.088.0

124.0127.0130.0

7.938.51

10.48

120125130

S-24M120S-24M125S-24M130

168.0174.0180.0

127.0127.0127.0

71.074.077.0

91.096.099.0

133.0138.0141.0

11.3812.3113.09

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

1.3/81.7/161.1/2

S-2422S-2423S-2424

2.4412.5202.559

3.2283.2283.307

0.8270.8270.827

1.3781.3781.378

3.0313.0313.031

4.304.304.60

1.9/161.5/8

1.11/16

S-2425S-2426S-2427

2.6772.7172.795

3.3073.3073.307

0.8660.9060.945

1.4171.4571.496

3.0713.1103.150

4.704.704.80

1.3/41.13/16

1.7/8

S-2428S-2429S-2430

2.9132.9533.071

3.3073.3863.386

0.9841.0241.024

1.5351.5751.575

3.1893.2283.228

4.905.205.30

1.15/162

2.1/16

S-2431S-2432S-2433

3.1103.1893.228

3.3863.3863.386

1.0631.0631.102

1.6141.6141.654

3.2683.2683.307

5.305.305.40

2.1/82.3/162.1/4

S-2434S-2435S-2436

3.3073.4653.465

3.3863.3863.386

1.1021.1421.142

1.6541.6931.693

3.3073.3463.346

5.406.005.90

2.5/162.3/8

2.7/16

S-2437S-2438S-2439

3.5433.5433.701

3.3863.3863.386

1.1811.2601.260

1.7321.8111.811

3.3863.4653.465

6.106.106.40

2.1/22.9/162.5/8

S-2440S-2441S-2442

3.7513.8583.976

3.3863.3863.386

1.2601.3391.417

1.8111.8901.969

3.4653.5433.622

7.306.807.20

2.11/162.3/4

2.13/16

S-2443S-2444S-2445

4.0264.0944.144

3.3863.3863.386

1.4171.4961.496

1.9692.0872.087

3.6223.7403.740

7.407.508.30

2.7/82.15/16

3

S-2446S-2447S-2448

4.2524.3724.420

3.3863.3863.386

1.5751.6541.654

2.1652.3232.323

3.8193.9763.976

8.208.909.80

3.1/163.1/8

3.3/16

S-2449S-2450S-2451

4.6464.6464.716

3.3863.3863.386

1.7321.7321.732

2.4022.4022.402

4.0554.0554.055

9.709.7010.70

3.1/43.5/163.3/8

S-2452S-2453S-2454

4.7164.8824.882

3.3863.3863.386

1.7321.9691.969

2.4022.6772.677

4.0554.3314.331

10.7010.6010.60

3.7/163.1/2

3.9/16

S-2455S-2456S-2457

5.1185.1185.193

4.1734.1734.173

2.0872.0872.087

2.7952.7952.795

4.4494.4494.449

13.7013.7013.80

3.5/83.11/163.3/4

S-2458S-2459S-2460

5.1935.3155.315

4.1734.1734.173

2.0872.2052.205

2.7952.9132.913

4.4494.5674.567

13.8017.0017.00

3.13/163.7/8

3.15/16

S-2461S-2462S-2463

5.6705.6705.745

4.1734.1734.173

2.3232.3232.323

3.0313.0313.031

4.6854.6854.685

17.0017.0017.90

44.1/164.1/8

S-2464S-2465S-2466

5.7455.8275.827

4.1734.1734.173

2.3232.4412.441

3.0313.2283.228

4.6854.8824.882

17.9017.4017.40

4.3/164.1/44.3/8

S-2467S-2468S-2470

6.1036.1036.193

4.1734.1734.173

2.5592.5592.559

3.3463.3463.346

5.0005.0005.000

18.7018.7019.70

4.1/24.5/84.3/4

S-2472S-2474S-2476

6.3396.4196.614

5.0005.0005.000

2.6772.6772.795

3.4653.4653.583

5.1185.1185.236

23.0024.2025.00

55.1/8

S-2480S-2482

6.9307.087

5.0005.000

2.9133.031

3.7803.898

5.4335.551

28.3028.80








A/F A/FT

OAL

D1 D2

C

IMPACT SOCKETS

21 “1

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

323334

S-24M32LS-24M33LS-24M34L

58.059.060.0

82.082.082.0

19.019.020.0

78.078.078.0

120.0120.0120.0

2.552.572.58

353637

S-24M35LS-24M36LS-24M37L

62.063.064.0

82.082.082.0

21.021.021.0

78.078.078.0

120.0120.0120.0

2.652.672.69

383940

S-24M38LS-24M39LS-24M40L

65.067.068.0

82.084.084.0

21.022.022.0

78.078.078.0

120.0120.0120.0

2.702.912.92

414243

S-24M41LS-24M42LS-24M43L

69.070.071.0

84.084.084.0

23.023.024.0

83.083.083.0

125.0125.0125.0

3.033.053.07

444546

S-24M44LS-24M45LS-24M46L

73.074.075.0

84.084.086.0

24.025.026.0

83.083.083.0

125.0125.0125.0

3.163.173.30

474849

S-24M47LS-24M48LS-24M49L

77.078.079.0

86.086.086.0

26.026.027.0

83.083.083.0

125.0125.0125.0

3.393.413.42

505152

S-24M50LS-24M51LS-24M52L

80.081.082.0

86.086.086.0

27.027.028.0

83.083.088.0

125.0125.0130.0

3.443.463.64

545556

S-24M54LS-24M55LS-24M56L

84.086.088.0

86.086.086.0

28.029.029.0

88.088.088.0

130.0130.0130.0

3.673.804.12

575859

S-24M57LS-24M58LS-24M59L

88.090.090.0

86.086.086.0

29.030.032.0

88.088.088.0

130.0130.0130.0

4.054.204.04

606162

S-24M60LS-24M61LS-24M62L

90.094.094.0

86.086.086.0

32.032.032.0

88.088.088.0

130.0130.0130.0

4.044.354.35

656770

S-24M65LS-24M67LS-24M70L

99.0101.0104.0

86.086.086.0

34.036.038.0

98.098.098.0

140.0140.0140.0

5.055.115.23

737576

S-24M73LS-24M75LS-24M76L

109.0111.0118.0

86.086.086.0

40.042.044.0

98.0108.0108.0

140.0150.0150.0

5.736.276.82

808586

S-24M80LS-24M85LS-24M86L

118.0124.0124.0

86.086.086.0

44.048.050.0

108.0118.0118.0

150.0160.0160.0

6.827.797.57

9095100

S-24M90LS-24M95L

S-24M100L

130.0135.0143.0

106.0106.0106.0

53.056.059.0

128.0128.0128.0

170.0170.0170.0

9.689.9711.03

105110115

S-24M105LS-24M110LS-24M115L

148.0154.0161.0

106.0106.0127.0

62.065.068.0

138.0138.0138.0

180.0180.0180.0

11.9912.6114.69

120125130

S-24M120LS-24M125LS-24M130L

167.0174.0180.0

127.0127.0127.0

71.074.077.0

148.0148.0148.0

190.0190.0190.0

16.2517.3518.11

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.lbs.

1.3/81.7/161.1/2

S-2422LS-2423LS-2424L

2.4412.5202.559

3.2283.2283.228

0.8270.8270.827

3.0713.0713.071

4.7244.7244.724

5.805.905.90

1.9/161.5/8

1.11/16

S-2425LS-2426LS-2427L

2.6772.7172.795

3.3073.3073.307

0.8660.9060.945

3.0713.2683.268

4.7244.9214.921

6.406.706.80

1.3/41.13/16

1.7/8

S-2428LS-2429LS-2430L

2.9132.9533.071

3.3073.3863.386

0.9841.0241.024

3.2683.2683.268

4.9214.9214.921

7.007.307.50

1.15/162

2.1/16

S-2431LS-2432LS-2433L

3.1103.1893.228

3.3863.3863.386

1.0631.0631.102

3.2683.2683.465

4.9214.9215.118

7.507.608.00

2.1/82.3/162.1/4

S-2434LS-2435LS-2436L

3.3073.4653.465

3.3863.3863.386

1.1021.1421.142

3.4653.4653.465

5.1185.1185.118

8.109.108.90

2.5/162.3/8

2.7/16

S-2437LS-2438LS-2439L

3.5433.5433.701

3.3863.3863.386

1.1811.2601.260

3.4653.4653.465

5.1185.1185.118

9.208.909.60

2.1/22.9/162.5/8

S-2440LS-2441LS-2442L

3.7513.8983.976

3.3863.3863.386

1.2601.3391.417

3.4653.8583.858

5.1185.5125.512

10.5011.1011.20

2.11/162.3/4

2.13/16

S-2443LS-2444LS-2445L

4.0264.0944.144

3.3863.3863.386

1.4171.4961.496

3.8583.8583.858

5.5125.5125.512

11.4011.5012.30

2.7/82.15/16

3

S-2446LS-2447LS-2448L

4.2914.3704.420

3.3863.3863.386

1.5751.6541.654

3.8584.2524.252

5.5125.9065.906

12.6013.8014.70

3.1/163.1/8

3.3/16

S-2449LS-2450LS-2451L

4.6464.6464.716

3.3863.3863.386

1.7321.7321.732

4.2524.2524.252

5.9065.9065.906

15.0015.0016.00

3.1/43.5/163.3/8

S-2452LS-2453LS-2454L

4.7164.8824.882

3.3863.3863.386

1.7321.9691.969

4.2524.6464.646

5.9066.2996.299

16.0016.7016.70

3.7/163.1/2

3.9/16

S-2455LS-2456LS-2457L

5.1185.1185.193

4.1734.1734.173

2.0872.0872.087

5.0395.0395.039

6.6936.6936.693

21.3021.3021.40

3.5/83.11/163.3/4

S-2458LS-2459LS-2460L

5.1935.3155.315

4.1734.1734.173

2.0872.2052.205

5.0395.0395.039

6.6936.6936.693

21.4021.9021.90

3.13/163.7/8

3.15/16

S-2461LS-2462LS-2463L

5.6705.6705.745

4.1734.1734.173

2.3232.3232.323

5.0395.0395.039

6.6936.6936.693

24.9024.9025.80

44.1/164.1/8

S-2464LS-2465LS-2466L

5.7455.8275.827

4.1734.1734.173

2.3232.4412.441

5.0395.4335.433

6.6937.0877.087

25.8026.4026.40

4.3/164.1/44.3/8

S-2467LS-2468LS-2470L

6.1036.1036.193

4.1734.1734.173

2.5592.5592.559

5.4335.4335.433

7.0877.0877.087

27.7027.7028.70

4.1/24.5/84.3/4

S-2472LS-2474LS-2476L

6.3396.5756.575

5.0005.0005.000

2.6772.7952.795

5.4335.8275.827

7.0877.4807.480

32.3035.7035.70

55.1/8

S-2480LS-2482L

6.9307.087

5.0005.000

2.9133.031

5.8275.827

7.4807.480

39.4039.90








A/F A/FT

OAL

D1 D2

C

IMPACT ACCESSORIES

21 “1

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

WtKg. (lbs.)

150 (6")304 (12")

E2406E2412

52.0 (2.047) 86.0 (3.386)3.90 (8.58)

6.30 (13.86)

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

WtKg. (lbs.)

100 (4")125 (5")

250 (10")510 (20")

S2404S2405S2410S2420

52.0 (2.047) 38.1 (1.500)

2.50 (5.50)2.80 (6.16)3.60 (7.92)5.10 (11.20)

SIZEMODEL


OALmm (inch)

WtKg. (lbs.)

1.1/2" F X 1" M1.1/2" F X 2.1/2" M

1.1/2" F X #5 M

A2416A2440A2495

86.0 (3.386)100.0 (3.937)113.0 (4.448)115.0 (4.527)

1.98 (4.37)3.92 (8.65)4.20 (9.25)

SQUAREDRIVE

MODELNO.

DIAmm (inch)

OALmm (inch)

WtKg. (lbs.)

1.1/2" U2424 86.0 (3.386) 158 (6.220) 3.85 (8.47)

SIZEMODEL


OALmm (inch)

WtKg. (lbs.)

1.1/2" F X 1" F1.1/2" F X 1.1/2" F1.1/2" F X 2.1/2" F

AN2416AN2424AN2440

86.0 (3.386)80.0 (3.149)95.0 (3.740)110.0 (4.330)

2.30 (5.06)3.60 (7.92)4.50 (9.90)

TORQTOOL Impact Sockets ideal for use with

Hydraulic Torque Wrenches.

REGULAR EXTENSIONS

SQUARE ADAPTORS

UNIVERSAL JOINT



IMPACT SOCKETS

21 “2

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.Ibs.

1.5/81.3/41.7/8

S-4026S-4028S-4030

3.3863.3863.386

4.5674.5674.567

1.1021.1021.102

1.8111.8111.811

4.0944.0944.094

11.3011.3011.30

22.1/82.1/4

S-4032S-4034S-4036

3.5433.6423.789

4.5674.8824.882

1.1421.1811.260

1.8111.8112.047

4.0944.0944.331

11.1012.9013.50

2.3/82.1/22.5/8

S-4038S-4040S-4042

3.9374.1334.281

5.0005.0005.000

1.4171.4961.496

2.2052.2832.283

4.4884.5674.567

14.6015.0015.20

2.3/42.7/8

2.15/16

S-4044S-4046S-4047

4.4294.5774.675

5.0005.0005.000

1.5751.5751.654

2.3622.3622.520

4.6464.6464.803

15.5015.7016.20

33.1/83.1/4

S-4048S-4050S-4052

4.7744.9214.999

5.0005.0005.000

1.7321.7321.890

2.5202.5202.677

4.8034.8034.961

16.4016.5016.70

3.3/83.1/23.5/8

S-4054S-4056S-4058

5.1975.3545.394

5.0005.0005.000

1.9692.0472.047

2.6772.7562.756

5.0795.1185.118

18.9019.5020.40

3.3/43.7/8

4

S-4060S-4062S-4064

5.5915.7875.827

5.0005.0005.000

2.1262.2052.205

2.8353.0713.071

5.1975.4335.433

20.6021.6022.40

4.1/84.1/44.3/8

S-4066S-4068S-4070

6.0636.2996.379

5.0005.0005.000

2.3622.5202.520

3.2283.3863.386

5.5915.7485.748

24.2025.5026.40

4.1/24.5/84.7/8

S-4072S-4074S-4078

6.4966.5367.047

5.0005.0005.000

2.6382.6382.874

3.5043.5043.740

5.8665.8666.024

26.8028.0030.10

55.1/85.1/4

S-4080S-4082S-4084

7.1637.2037.203

5.0005.0005.000

2.9922.9922.992

3.8583.8583.858

6.1426.1426.142

31.0032.1032.10

5.3/85.1/25.5/8

S-4086S-4088S-4090

7.6097.7177.757

5.9845.9845.984

3.1103.2283.228

4.0554.1734.173

6.3396.4576.457

41.1040.9041.70

5.3/46.1/86.1/2

S-4092S-4098

S-40104

8.0819.0169.016

5.9846.8906.890

3.3463.7803.780

4.2914.8034.803

6.5757.0877.087

45.2059.8059.80

6.7/87

7.1/4

S-40110S-40112S-40116

9.5289.68510.000

6.8906.8906.890

3.9374.0554.173

5.0395.1575.276

7.3237.4417.559

66.4066.6071.60

7.1/27.5/87.3/4

S-40120S-40122S-40124

10.27610.43310.433

6.8906.8906.890

4.2914.4094.409

5.3945.5915.591

7.6777.8747.874

74.9076.6076.60

7.7/88

8.1/8

S-40126S-40128S-40130

10.74810.74811.220

6.8906.8906.890

4.5284.5284.724

5.7095.7095.906

7.9927.9928.189

82.5083.6087.80

8.1/48.3/88.1/2

S-40132S-40134S-40136

11.22011.22511.496

6.8906.8906.890

4.7244.7244.843

5.9065.9066.024

8.1898.1898.307

87.8088.7092.30

99.1/4

S-40144S-40148

12.02912.029

6.8906.890

5.1185.118

6.2996.299

8.5838.583

101.80101.80

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

434445

S-40M43S-40M44S-40M45

86.086.086.0

116.0116.0116.0

28.028.028.0

46.046.046.0

104.0104.0104.0

5.245.205.15

464748

S-40M46S-40M47S-40M48

86.086.086.0

116.0116.0116.0

28.028.028.0

46.046.046.0

104.0104.0104.0

5.115.065.01

495051

S-40M49S-40M50S-40M51

86.086.190.0

116.0116.0116.0

28.028.029.0

46.046.046.0

104.0104.0104.0

4.974.925.07

525455

S-40M52S-40M54S-40M55

90.092.593.8

116.0124.0124.0

29.030.032.0

46.046.052.0

104.0104.0110.0

5.025.876.08

565758

S-40M56S-40M57S-40M58

95.096.397.5

124.0124.0124.0

32.032.032.0

52.052.052.0

110.0110.0110.0

6.106.126.14

596062

S-40M59S-40M60S-40M62

98.8100.0103.0

127.0127.0127.0

34.036.036.0

54.056.056.0

112.0114.0114.0

6.556.646.69

656770

S-40M65S-40M67S-40M70

106.0109.0113.0

127.0127.0127.0

38.038.040.0

58.058.060.0

116.0116.0118.0

6.836.897.05

737576

S-40M73S-40M75S-40M76

116.0119.0120.0

127.0127.0127.0

40.042.044.0

60.064.064.0

118.0122.0122.0

7.137.387.39

808586

S-40M80S-40M85S-40M86

125.0129.0132.0

127.0127.0127.0

44.048.050.0

64.068.068.0

122.0126.0129.0

7.508.068.59

9095100

S-40M90S-40M95

S-40M100

136.0142.0148.0

127.0127.0127.0

52.054.056.0

70.072.078.0

130.0132.0138.0

8.879.3710.20

105110115

S-40M105S-40M110S-40M115

154.0161.0165.0

127.0127.0127.0

60.064.067.0

82.086.089.0

142.0146.0149.0

10.9911.8912.19

120125130

S-40M120S-40M125S-40M130

173.0179.0185.0

127.0127.0127.0

70.073.076.0

92.095.098.0

152.0153.0156.0

13.3013.6814.52

135140145

S-40M135S-40M140S-40M145

192.0196.0204.0

152.0152.0152.0.

79.082.085.0

103.0106.0109.0

161.0164.0167.0

18.3718.5820.22

150155160

S-40M150S-40M155S-40M160

211.0215.0223.0

152.0152.0152.0

88.091.094.0

112.0117.0120.0

170.0175.0178.0

21.3722.0423.92

165170175

S-40M165S-40M170S-40M175

229.0235.0242.0

175.0175.0175.0

96.098.0100.0

122.0126.0128.0

180.0184.0186.0

27.1928.9330.20

180185190

S-40M180S-40M185S-40M190

246.0254.0261.0

175.0175.0175.0

103.0106.0109.0

131.0134.0137.0

189.0192.0195.0

30.2832.5434.04

195200210

S-40M195S-40M200S-40M210

265.0273.0285.0

175.0175.0175.0

112.0115.0120.0

142.0145.0150.0

200.0203.0208.0

34.8037.4939.91

215225

S-40M215S-40M225

292.0304.0

175.0175.0

123.0130.0

153.0160.0

211.0218.0

41.9445.71








A/F A/FT

OAL

D1 D2

C

IMPACT SOCKETS

21 “2

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

Wt.Ibs.

1.5/81.3/41.7/8

S-4026LS-4028LS-4030L

3.3863.3863.386

4.1734.1734.567

1.0241.0241.102

4.3314.3314.331

6.6146.6146.614

13.8013.8013.80

22.1/82.1/4

S-4032LS-4034LS-4036L

3.5433.6423.789

4.5674.8824.882

1.1421.1811.260

4.3314.3314.606

6.6146.6146.890

15.9017.8018.90

2.3/82.1/22.5/8

S-4038LS-4040LS-4042L

3.9374.1334.281

5.0005.0005.000

1.4171.4961.496

4.6065.0005.000

6.8907.2837.283

20.0021.8022.30

2.3/42.7/8

2.15/16

S-4044LS-4046LS-4047L

4.4294.5774.675

5.0005.0005.000

1.5751.5751.654

5.0005.0005.000

7.2837.2837.283

22.8023.4023.70

33.1/83.1/4

S-4048LS-4050LS-4052L

4.7744.9214.999

5.0005.0005.000

1.7321.7321.890

5.0005.0005.394

7.2837.2837.677

24.1024.6026.30

3.3/83.1/23.5/8

S-4054LS-4056LS-4058L

5.1975.3545.394

5.0005.0005.000

1.9692.0472.047

5.2765.3155.315

7.6777.6777.677

28.7029.5030.40

3.3/43.7/8

4

S-4060LS-4062LS-4064L

5.5915.7875.827

5.0005.0005.000

2.1262.2052.205

5.4725.3155.315

7.8357.6777.677

31.8032.4033.20

4.1/84.1/44.3/8

S-4066LS-4068LS-4070L

6.0636.2996.379

5.0005.0005.000

2.3622.5202.520

5.7095.8665.866

8.0718.2288.228

35.9038.2039.10

4.1/24.5/84.7/8

S-4072LS-4074LS-4078L

6.4966.5367.047

5.0005.0005.000

2.6382.6382.874

5.9065.9066.181

8.2688.2688.465

39.0040.2045.30

55.1/85.1/4

S-4080LS-4082LS-4084L

7.1637.2037.203

5.0005.0005.000

2.9922.9922.992

6.1816.1816.181

8.4658.4658.465

47.2048.3048.30

5.3/85.1/25.5/8

S-4086LS-4088LS-4090L

7.6097.7177.757

5.9845.9845.984

3.1103.2283.228

6.3786.5756.575

8.6618.8588.858

57.2057.7058.50

5.3/46.1/86.1/2

S-4092LS-4098L

S-40104L

8.0819.0169.016

5.9846.8906.890

3.3463.7803.780

6.7727.1657.165

9.0559.4499.449

64.1082.6082.60

6.7/87

7.1/4

S-40110LS-40112LS-40116L

9.5289.68510.000

6.8906.8906.890

3.3974.0554.173

7.1657.3627.559

9.4499.6469.843

89.9091.60100.30

7.1/27.5/87.3/4

S-40120LS-40122LS-40124L

10.27610.43310.433

6.8906.8906.890

4.2914.4094.409

7.5597.8357.835

9.84310.11810.118

103.20106.20106.20

7.7/88

8.1/8

S-40126LS-40128LS-40130L

10.74810.79811.220

6.8906.8906.890

4.5284.5284.724

7.9537.9537.953

10.23610.23610.236

114.20115.30120.40

8.1/48.3/88.1/2

S-40132LS-40134LS-40136L

11.22011.22511.496

6.8906.8906.890

4.7244.7244.843

7.9537.9538.346

10.23610.23610.630

120.40121.30130.70

99.1/4

S-40144LS-40148L

12.02912.029

6.8906.890

5.1185.118

8.6618.661

10.63010.630

138.50138.50

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

Wt.Kg.

434445

S-40M43LS-40M44LS-40M45L

86.086.086.0

106.0106.0106.0

26.026.026.0

110.0110.0110.0

168.0168.0168.0

6.436.366.29

464748

S-40M46LS-40M47LS-40M48L

86.086.086.0

106.0106.0116.0

27.028.028.0

110.0110.0110.0

168.0168.0168.0

6.226.147.03

495051

S-40M49LS-40M50LS-40M51L

86.086.090.0

116.0116.0116.0

28.029.029.0

110.0110.0110.0

168.0168.0168.0

6.956.867.24

525455

S-40M52LS-40M54LS-40M55L

90.092.593.8

116.0124.0124.0

29.030.032.0

110.0110.0110.0

168.0168.0168.0

7.168.118.18

565758

S-40M56LS-40M57LS-40M58L

95.096.397.5

124.0124.0124.0

32.032.032.0

117.0117.0117.0

175.0175.0175.0

8.518.588.65

596062

S-40M59LS-40M60LS-40M62L

98.8100.0103.0

127.0127.0127.0

34.036.036.0

117.0117.0127.0

175.0175.0185.0

9.049.109.66

656770

S-40M65LS-40M67LS-40M70L

106.0109.0113.0

127.0127.0127.0

38.038.040.0

127.0127.0127.0

185.0185.0185.0

9.9010.1310.37

737576

S-40M73LS-40M75LS-40M76L

116.0119.0120.0

127.0127.0127.0

40.042.044.0

127.0127.0127.0

185.0185.0185.0

10.6210.7810.85

808586

S-40M80LS-40M85LS-40M86L

125.0129.0132.0

127.0127.0127.0

44.048.050.0

127.0137.0134.0

185.0195.0195.0

11.2012.4213.03

9095100

S-40M90LS-40M95L

S-40M100L

136.0142.0148.0

127.0127.0127.0

52.054.056.0

135.0139.0135.0

195.0199.0195.0

13.4014.4715.07

105110115

S-40M105LS-40M110LS-40M115L

154.0161.0165.0

127.0127.0127.0

60.064.067.0

145.0149.0150.0

205.0109.0210.0

16.3317.6717.72

120125130

S-40M120LS-40M125LS-40M130L

173.0179.0185.0

127.0127.0127.0

70.073.076.0

150.0157.0157.0

210.0215.0215.0

19.2320.5721.44

135140145

S-40M135LS-40M140LS-40M145L

192.0196.0204.0

152.0152.0152.0

79.082.085.0

162.0167.0172.0

220.0225.0230.0

25.6726.2228.82

150155160

S-40M150LS-40M155LS-40M160L

211.0215.0223.0

152.0152.0152.0

88.091.094.0

172.0177.0177.0

230.0235.0235.0

30.3830.9733.49

165170175

S-40M165LS-40M170LS-40M175L

229.0235.0242.0

175.0175.0175.0

96.098.0100.0

182.0182.0182.0

240.0240.0240.0

37.5339.2240.86

180185190

S-40M180LS-40M185LS-40M190L

246.0254.0261.0

175.0175.0175.0

103.0106.0109.0

187.0192.0192.0

245.0250.0250.0

41.6345.6146.93

195200210

S-40M195LS-40M200LS-40M210L

265.0273.0285.0

175.0175.0175.0

112.0115.0120.0

199.0202.0202.0

257.0260.0260.0

48.2851.8954.71

215225

S-40M215LS-40M225L

292.0304.0

175.0175.0

123.0130.0

212.0220.0

270.0270.0

59.4262.42


IMPACT ACCESSORIES

21 “2

TORQTOOL Impact Socket used along with a TORQPLUS Torque Multiplier

OALmmc (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

125 (5")150 (6")200 (8")

S4005S4006S4008

85.0 (3.346) 63.5 (2.500)250 (10")380 (15")510 (20")

S4010S4015S4020

SIZEMODEL


OALmm (inch)

2.1/2" F X 1.1/2" M2.1/2" F X 3.1/2" M

A4024A4056

127.0 (5.000)140.0 (5.511)185.0 (7.283)

SIZEMODEL


OALmm (inch)

2.1/2" F X 1.1/2" F2.1/2" F X 2.1/2" F2.1/2" F X 3.1/2" F

AN4024AN4040AN4056

127.0 (5.000)115.0 (4.527)120.0 (4.724)162.0 (6.377)

SQUAREDRIVE

MODELNO.

DIAmm (inch)

OALmm (inch)

2.1/2" U4040 127.0 (5.000) 232.0 (9.133)

UNIVERSAL JOINT

SQUARE ADAPTORS



IMPACT SOCKETS

21 “3

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

120130135

S-56M120S-56M130S-56M135

180.0193.0197.0

175.0175.0175.0

72.080.083.0

102.0110.0118.0

182.0190.0198.0

145150155

S-56M145S-56M150S-56M155

213.0218.0225.0

175.0175.0175.0

86.090.092.0

134.0134.0134.0

214.0214.0214.0

165170175

S-56M165S-56M170S-56M175

237.0243.0249.0

175.0175.0175.0

98.0100.0102.0

151.0151.0151.0

231.0231.0231.0

180195200

S-56M180S-56M195S-56M200

255.0275.0280.0

175.0175.0175.0

108.0118.0120.0

157.0165.0170.0

237.0245.0250.0

215230235

S-56M215S-56M230S-56M235

298.0317.0325.0

175.0175.0175.0

125.0132.0136.0

183.0199.0199.0

263.0279.0279.0

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

4.5/84.7/85.1/4

S-5674S-5678S-5684

6.8897.2837.755

6.8896.8896.889

2.8342.8343.149

4.0154.3304.645

7.1657.4807.795

5.3/85.5/85.3/4

S-5686S-5690S-5692

7.8748.2678.385

6.8896.8896.889

3.2673.3853.385

4.6455.2755.275

7.7958.4258.425

66.1/86.1/2

S-5696S-5698

S-56104

8.7008.8589.330

6.8896.8896.889

3.5433.6223.858

5.2755.2755.944

8.4258.4259.094

6.7/87.1/47.5/8

S-56110S-56116S-56122

9.8031027510.826

6.8896.8896.889

4.0154.4094.645

5.9446.1816.496

9.0949.3309.645

88.3/89.1/8

S-56128S-56134S-56146

11.22011.65312.598

6.8896.8896.889

4.7244.8035.196

7.2047.2047.834

10.35410.35410.984

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

4.5/84.7/85.1/4

S-5674LS-5678LS-5684L

6.8897.2837.755

6.8896.8896.889

2.8342.8343.149

7.7567.7567.874

10.90610.90611.024

5.3/85.5/85.3/4

S-5686LS-5690LS-5692L

7.8748.2678.385

6.8896.8896.889

3.2673.3853.385

7.8748.5438.543

11.02411.69311.693

66.1/86.1/2

S-5696LS-5698L

S-56104L

8.7009.0559.330

6.8896.8896.889

3.5433.6223.858

8.5438.5439.173

11.69311.69312.323

6.7/87.1/47.5/8

S-56110LS-56116LS-56122L

9.80310.27510.826

6.8896.8896.889

4.0154.4094.645

9.1739.4489.763

12.32312.59812.913

88.3/89.1/8

S-56128LS-56134LS-56146L

11.22011.65312.598

6.8896.8896.889

4.7244.8035.196

10.47210.47211.102

13.32213.62214.252

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

120130135

S-56M120LS-56M130LS-56M135L

180.0193.0197.0

175.0175.0175.0

72.080.083.0

197.0200.0200.0

277.0280.0280.0

145150155

S-56M145LS-56M150LS-56M155L

213.0218.0225.0

175.0175.0175.0

86.090.092.0

215.0215.0217.0

295.0295.0297.0

165170175

S-56M165LS-56M170LS-56M175L

237.0243.0249.0

175.0175.0175.0

98.0100.0102.0

233.0233.0233.0

313.0313.0313.0

180195200

S-56M180LS-56M195LS-56M200L

255.0275.0280.0

175.0175.0175.0

108.0118.0120.0

240.0248.0252.0

320.0328.0332.0

215230235

S-56M215LS-56M230LS-56M235L

298.0317.0325.0

175.0175.0175.0

125.0132.0136.0

266.0279.0282.0

346.0359.0362.0

IMPACT ACCESSORIES

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

250 (10")510 (20")

S5610S5620

120.0 (4.724) 175.0 (6.889)

SIZEMODEL


OALmm (inch)

3.1/2" F X 2.1/2" M A5640 175.0 (6.889) 185.0 (7.283)

SIZEMODEL


OALmm (inch)

3.1/2" F X 2.1/2" F AN5640 175.0 (6.889) 165.0 (6.496)



SQUARE ADAPTORS



IMPACT SOCKETS# 5

SPLINEDRIVE

3.1433.2223.222

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

3/413/167/8

S-9512S-9513S-9514

2.2002.2002.200

0.9110.9791.051

0.6290.6290.629

1.3751.3751.375

2.6722.6722.672

15/161

1.1/16

S-9515S-9516S-9517

2.2002.2002.200

1.1231.1961.268

0.6290.7070.707

1.3751.4541.454

2.6722.7502.750

1.1/81.3/161.1/4

S-9518S-9519S-9520

2.2002.2002.200

1.3401.4131.485

0.7860.8640.864

1.5321.6111.611

2.2892.9082.908

1.5/161.3/8

1.7/16

S-9521S-9522S-9523

2.2002.2002.200

1.5571.6251.697

0.8640.9820.982

1.6111.7291.729

2.9083.0263.026

1.1/21.9/161.5/8

S-9524S-9525S-9526

2.2002.2002.200

1.7701.8421.914

0.9820.9821.100

1.7291.7291.847

3.0263.0263.143

1.11/161.3/4

1.13/16

S-9527S-9528S-9529

2.2002.2002.200

1.9862.0592.131

1.1001.1001.100

1.8471.9251.925

1.7/81.15/16

2

S-9530S-9531S-9532

2.2002.2002.200

2.1992.2762.352

1.1001.1001.179

1.9252.0042.083

3.2223.3013.379

2.1/162.1/8

2.3/16

S-9533S-9534S-9535

2.2002.2002.200

2.4202.5062.560

1.1791.1791.336

2.0832.0832.318

3.3793.3793.615

2.1/42.5/162.3/8

S-9536S-9537S-9538

3.3793.3793.379

2.6332.7052.777

1.3361.3361.415

2.3182.3182.397

3.6153.6153.694

2.7/162.1/2

2.9/16

S-9539S-9540S-9541

3.3793.3793.379

2.8502.9222.994

1.4151.4931.493

2.3972.4752.475

3.6943.7723.772

2.5/82.11/162.3/4

S-9542S-9543S-9544

3.3793.3793.379

3.0663.1343.211

1.4931.5721.572

2.4752.5542.554

3.7723.8513.851

2.13/162.7/8

2.15/16

S-9545S-9546S-9547

3.3793.3793.379

3.2793.3563.423

1.5721.5721.650

2.5542.6632.711

3.8513.9294.008

33.1/163.1/8

S-9548S-9549S-9550

3.3793.3793.379

3.4963.5723.640

1.6501.6501.650

2.7112.7112.711

4.0084.0084.008

3.1/43.5/163.3/8

S-9552S-9553S-9554

3.3794.9125.039

3.7853.8623.385

1.7291.8071.850

2.9473.0263.149

4.2444.3224.921

3.1/23.5/83.3/4

S-9556S-9558S-9560

5.1185.2755.354

3.3853.3853.385

1.8501.9682.125

3.1493.1493.149

4.9214.9214.921

3.7/84

S-9562S-9564

5.4335.511

3.3853.385

2.1252.125

3.1493.149

4.9214.921

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

192021

S-95M19S-95M20S-95M21

48.048.048.0

56.056.056.0

16.016.016.0

35.035.035.0

68.068.068.0

222324

S-95M22S-95M23S-95M24

48.048.048.0

56.056.056.0

16.016.016.0

35.035.035.0

68.068.068.0

252627

S-95M25S-95M26S-95M27

50.050.052.0

56.056.056.0

18.018.020.0

37.037.039.0

70.070.072.0

282930

S-95M28S-95M29S-95M30

52.053.053.5

56.056.056.0

20.022.022.0

39.041.041.0

72.074.074.0

313233

S-95M31S-95M32S-95M33

54.054.058.0

56.056.056.0

22.022.022.0.

41.041.041.0

74.074.074.0

343536

S-95M34S-95M35S-95M36

58.059.864.0

56.056.056.0

22.025.025.0

41.044.044.0

74.077.077.0

373839

S-95M37S-95M38S-95M39

63.063.564.0

56.056.056.0

25.025.025.0

44.044.044.0

77.077.077.0

404142

S-95M40S-95M41S-95M42

64.068.068.0

56.056.056.0

25.028.028.0

44.047.047.0

77.080.080.0

434445

S-95M43S-95M44S-95M45

68.073.073.0

56.056.056.0

28.028.028.0

47.049.049.0

80.082.082.0

464748

S-95M46S-95M47S-95M48

73.073.077.0

56.056.056.0

28.028.028.0

49.049.049.0

82.082.082.0

495051

S-95M49S-95M50S-95M51

77.378.078.0

56.056.056.0

28.028.030.0

51.051.053.0

84.084.086.0

525455

S-95M52S-95M54S-95M55

82.082.086.0

56.056.056.0

30.030.034.0

53.053.059.0

86.086.092.0

565758

S-95M56S-95M57S-95M58

86.088.088.0

56.086.086.0

34.034.034.0

59.059.059.0

92.092.092.0

596061

S-95M59S-95M60S-95M61

88.088.092.3

86.086.086.0

34.036.036.0

59.061.061.0

92.094.094.0

626567

S-95M62S-95M65S-95M67

93.597.399.8

86.086.086.0

34.038.038.0

59.063.063.0

92.096.096.0

707375

S-95M70S-95M73S-95M75

104.0107.0107.0

86.086.086.0

40.040.042.0

65.067.069.0

98.0100.0102.0

7680

S-95M76S-95M80

111.0116.0

86.086.0

42.042.0

69.069.0

102.0102.0

METRIC # 5 SPLINE FRACTIONAL # 5 SPLINE







A/F A/FT

OAL

D1 D2

C

IMPACT SOCKETS

IMPACT ACCESSORIES

# 5SPLINEDRIVE

A/Fmm

MODELNO.

D1mm

D2mm

Tmm

Cmm

OALmm

212223

S-95M21LS-95M22LS-95M23L

48.048.048.0

56.056.056.0

14.014.014.0

115.0115.0115.0

160.0160.0160.0

242526

S-95M24LS-95M25LS-95M26L

50.050.052.0

56.056.056.0

16.016.016.0

115.0115.0115.0

160.0160.0160.0

272829

S-95M27LS-95M28LS-95M29L

52.052.054.0

56.056.056.0

16.016.016.0

115.0115.0115.0

160.0160.0160.0

303132

S-95M30LS-95M31LS-95M32L

54.060.060.0

56.056.056.0

21.021.021.0

115.0115.0115.0

160.0160.0160.0

333435

S-95M33LS-95M34LS-95M35L

60.060.060.0

56.056.056.0

21.021.021.0

115.0115.0115.0

160.0160.0160.0

363738

S-95M36LS-95M37LS-95M38L

63.063.063.0

56.056.056.0

25.025.025.0

115.0115.0115.0

160.0160.0160.0

394041

S-95M39LS-95M40LS-95M41L

67.067.067.0

56.056.056.0

25.025.028.0

115.0115.0115.0

160.0160.0160.0

424344

S-95M42LS-95M43LS-95M44L

67.067.073.0

56.056.056.0

28.028.028.0

115.0115.0115.0

160.0160.0160.0

454647

S-95M45LS-95M46LS-95M47L

73.073.073.0

56.056.056.0

28.028.028.0

115.0115.0115.0

160.0160.0160.0

484950

S-95M48LS-95M49LS-95M50L

73.073.082.0

56.056.056.0

28.028.028.0

115.0115.0115.0

160.0160.0160.0

5152

S-95M51LS-95M52L

82.082.0

56.056.0

28.028.0

115.0115.0

160.0160.0

A/Finch

MODELNO.

D1inch

D2inch

Tinch

Cinch

OALinch

3/413/167/8

S-9512LS-9513LS-9514L

1.8891.8891.889

2.3622.3622.362

0.5510.5510.551

4.5274.5274.527

6.2996.2996.299

15/161

1.1/16

S-9515LS-9516LS-9517L

1.9681.9682.047

2.3622.3622.362

0.6290.6290.629

4.5274.5274.527

6.2996.2996.299

1.1/81.3/161.1/4

S-9518LS-9519LS-9520L

2.0472.1252.362

2.3622.3622.362

0.6290.8260.826

4.5274.5274.527

6.2996.2996.299

1.5/161.3/8

1.7/16

S-9521LS-9522LS-9523L

2.3622.3622.480

2.3622.3622.362

0.8260.8260.984

4.5274.5274.527

6.2996.2996.299

1.1/21.9/161.5/8

S-9524LS-9525LS-9526L

2.4802.6372.637

2.3622.3622.362

0.9840.9841.102

4.5274.5274.527

6.2996.2996.299

1.11/161.3/4

1.13/16

S-9527LS-9528LS-9529L

2.6372.8742.874

2.3622.3622.362

1.1021.1021.102

4.5274.5274.527

6.2996.2996.299

1.7/81.15/16

2

S-9530LS-9531LS-9532L

2.8742.8743.228

2.3622.3622.362

1.1021.1021.102

4.5274.5274.527

6.2996.2996.299

2.1/162.1/8

2.3/16

S-9533LS-9534LS-9535L

3.2283.2283.228

2.3622.3622.362

1.1021.1021.181

4.5274.5274.527

6.2996.2996.299

2.1/42.5/162.3/8

S-9536LS-9537LS-9538L

3.4643.4643.464

3.3853.3853.385

1.1811.1811.259

4.5274.5274.527

6.2996.2996.299

2.7/162.1/2

2.9/16

S-9539LS-9540LS-9541L

3.4643.9373.937

3.3853.3853.385

1.2591.2591.496

4.5274.5274.527

6.2996.2996.299

2.5/82.11/16

S-9542LS-9543L

3.9373.937

3.3853.385

1.4961.496

4.5274.527

6.2996.299

METRIC DEEP # 5 SPLINE FRACTIONAL DEEP # 5 SPLINE

OALmm (inch)

MODELNO.

SHANK DIAmm (inch)

HEAD DIAmm (inch)

200 (8")381 (15")

E9508E9515

42.0 (1.653) 60.0 (2.362)

SIZEMODEL


OALmm (inch)

# 5 F X 1" M# 5 F X 1.1/2" M

A9516A9524

60.0 (2.362)90.0 (3.543)100.0 (3.937)

SPLINEDRIVE

MODELNO.

DIAmm (inch)

OALmm (inch)

# 5 # 5 SPLINE 60.0 (2.362) 152.0 (6.000)

SQUARE ADAPTORS

REGULAR EXTENSIONS

UNIVERSAL JOINT

SOCKET ACCESSORIES

SQUAREDRIVE

MODELNO.

APP.OAL

Wt.Kg.

3/81/2

PRH38PRH50

220290

0.580.65

3/41

PRH75PRH100

500610

2.804.30

SQUAREDRIVE

MODELNO.

APP.OAL

Wt.Kg.

1/23/41

PRA50PRA75

PRA100

75100117

0.200.450.95

SQUAREDRIVE

MODELNO.

APP.OAL

Wt.Kg.

3/81/23/4

PTH38PTH50PTH75

250300500

0.350.622.40

11.1/2

PTH100PTH150

750920

4.9515.80

SQUAREDRIVE

MODELNO.

APP.OAL

Wt.Kg.

3/81/2

PSH38PSH50

270380

0.300.60

3/41

PSH75PSH100

530800

2.604.55

SQUAREDRIVE

MODELNO.

APP.OAL

Wt.Kg.

3/81/2

PSC38PSC50

3545

0.020.05

3/41

PSC75PSC100

5080

0.130.40

SQUAREDRIVE

MODELNO.

DIAAPP.OAL

Wt.Kg.

1/23/41

UJ08BUJ12BUJ16B

304462

6885110

0.250.551.15

SQUARE COUPLERS

BALL TYPE UNIVERSAL JOINT

SWIVEL HANDLE

RATCHET ADAPTORS

REVERSIBLE RATCHETS

-INDUSTRIAL T HANDLE

CASTELLATED SOCKETS

NOMINALSIZE

MODELNO.

ODinch

OAL (W/O S)inch

OAL (S)inch

Binch

1.1/41.3/81.1/2

CS1620CS1622CS1624

2.1/42.3/42.3/4

222

3.1/23.3/4

4

1.1/81.1/41.3/8

1.3/42

2.1/4

CS1628CS1632CS1636

33.1/83.1/2

2.1/82.1/82.1/4

4.1/84.1/84.3/4

1.5/81.7/82.1/8

2.1/22.3/4

3

CS1640CS1644CS1648

3.7/84.1/44.5/8

2.1/42.1/22.1/2

4.3/45.3/85.3/8

2.3/82.5/82.7/8

3.1/24

4.1/2

CS1656CS1664CS1672

5.3/86.1/86.7/8

2.3/42.3/4

3

6.3/86.7/87.5/8

3.3/83.7/84.3/8

NOMINALSIZE

MODELNO.

ODinch

OAL (W/O S)inch

OAL (S)inch

Binch

2.1/42.1/22.3/4

CS2436CS2440CS2444

3.1/23.7/84.1/4

2.3/82.3/82.5/8

4.1/84.1/85.1/2

2.1/82.3/82.5/8

33.1/2

4

CS2448CS2456CS2464

4.5/85.3/86.1/8

2.5/82.7/82.7/8

5.1/26.1/2

7

2.7/83.3/83.7/8

4.1/25

5.1/2

CS2472CS2480CS2488

6.7/87.5/88.3/8

3.1/83.1/83.3/8

7.3/47.7/88.7/8

4.3/84.7/85.3/8

66.1/2

7

CS2496CS24104CS24112

9.1/410

10.5/8

3.3/83.1/23.1/2

9.3/89.1/210.3/8

5.7/86.3/86.7/8

NOMINALinch

MODELNO.

ODinch

OAL (W/O S)inch

OAL (S)inch

Binch

4.1/25

5.1/2

CS56072CS56080CS56088

6.7/87.5/88.3/8

55

5.1/4

9.5/89.3/410.3/4

4.3/84.7/85.3/8

66.1/2

7

CS56096CS26104CS56112

9.1/410

10.5/8

5.1/45.5/85.5/8

1111.1/2

12

5.7/86.3/86.7/8

NOMINALinch

MODELNO.

ODinch

OAL (W/O S)inch

OAL (S)inch

Binch

2.3/43

3.1/2

CS40044CS40048CS40056

4.1/44.5/85.3/8

3.1/43.1/43.1/2

6.1/86.1/87.1/8

2.5/82.7/83.3/8

44.1/2

5

CS40064CS40072CS40080

6.1/86.7/87.5/8

3.1/23.3/43.3/4

7.5/88.3/88.1/2

3.7/84.3/84.7/8

5.1/26

CS40088CS40096

8.3/89.1/4

44

9.1/210

5.3/85.7/8

6.1/27

CS40104CS40112

1010.5/8

4.1/84.1/8

10.1/211

6.3/86.7/8

Note: Skirted Sockets with long clearance for stud

can be made to specific length against order.

FRACTIONAL 1” SQ. DRIVE FRACTIONAL 1.1/2” SQ. DRIVE

FRACTIONAL 2.1/2” SQ. DRIVE FRACTIONAL 3.1/2” SQ. DRIVE

OD Max. outside dia. socket end

W/O S Without skirt

S Skirted

B Bore dia.

B

B

OD

SLUGGING WRENCHES

‘POWERMASTER’ SLUGGING WRENCHES1. Drop forged from high tensile alloy.

2. Machined to closed tolerances to ISO specifications.

3. Heat treated to achieve optimum Impact resistance.

4. Electroplating followed by black oxidizing to prevent from rusting.

5. Larger striking area to increase safety in use.

6. Greater sectional area for longer life.

7. Hexagon opening depth to ensure positive seating on nuts / bolts.

8. Chamferred openings for ease of location on nuts / bolts.

9. Greater offset height allows clear hammering in offset Slugging Wrenches.

10. Clear marking of size and model.

STRAIGHT SLUGGING WRENCHES

A / Fmm

MODELNO.

Tmm

Dmm

OALmm

Wt.Kg.

768085

MSW76MSW80MSW85

35.038.038.0

110.0126.0126.0

315.0340.0340.0

3.3704.8604.400

869095

MSW86MSW90MSW95

38.042.042.0

126.0152.0152.0

340.0400.0400.0

4.3004.6504.360

100105110

MSW100MSW105MSW110

42.050.050.0

152.0172.0172.0

400.0410.0435.0

7.49010.58011.670

115120125

MSW115MSW120MSW125

50.056.056.0

172.0194.0194.0

435.0475.0475.0

10.76016.07016.960

130135140

MSW130MSW135MSW140

60.060.065.0

205.0205.0230.0

505.0510.0565.0

16.85016.55019.000

145150155

MSW145MSW150MSW155

65.065.065.0

230.0230.0230.0

565.0565.0565.0

18.81018.55018.350

160165170

MSW160MSW165MSW170

70.070.070.0

270.0270.0270.0

635.0635.0635.0

29.90029.70029.250

175180185

MSW175MSW180MSW185

70.070.075.0

270.0270.0295.0

635.0635.0680.0

28.85028.50035.600

190195200

MSW190MSW195MSW200

75.075.075.0

295.0295.0295.0

680.0680.0680.0

35.40035.20034.900

205210215

MSW205MSW210MSW215

75.080.080.0

295.0325.0325.0

680.0725.0725.0

34.70050.85050.550

220225230

MSW220MSW225MSW230

80.080.080.0

325.0325.0325.0

725.0725.0725.0

50.10049.80049.500

A / Fmm

MODELNO.

Tmm

Dmm

OALmm

Wt.Kg.

222324

MSW22MSW23MSW24

18.018.018.0

48.048.048.0

182.0182.0182.0

0.6100.6100.610

252627

MSW25MSW26MSW27

18.018.018.0

48.048.048.0

182.0182.0182.0

0.5900.5900.590

282930

MSW28MSW29MSW30

18.018.018.0

54.054.054.0

185.0185.0185.0

0.5800.5600.550

313233

MSW31MSW32MSW33

18.018.018.0

54.054.054.0

185.0185.0185.0

0.5400.5500.540

343536

MSW34MSW35MSW36

18.018.022.0

54.054.064.0

185.0185.0215.0

0.5400.5401.060

373839

MSW37MSW38MSW39

22.022.022.0

64.064.064.0

215.0215.0215.0

1.0601.0401.030

404142

MSW40MSW41MSW42

22.022.022.0

64.064.064.0

215.0215.0215.0

1.0301.0301.020

434445

MSW43MSW44MSW45

25.025.025.0

76.076.076.0

238.0238.0238.0

1.4801.4701.430

464748

MSW46MSW47MSW48

25.025.025.0

76.076.080.0

238.0238.0240.0

1.4001.3801.360

495051

MSW49MSW50MSW51

25.025.025.0

80.080.080.0

240.0240.0240.0

1.3501.3401.400

525455

MSW52MSW54MSW55

25.025.028.0

80.080.088.0

240.0240.0262.0

1.4002.3502.320

565758

MSW56MSW57MSW58

28.028.028.0

88.088.088.0

262.0262.0262.0

2.3252.3102.300

596061

MSW59MSW60MSW61

28.028.028.0

94.094.094.0

265.0265.0265.0

2.2502.1402.140

626567

MSW62MSW65MSW67

28.030.030.0

94.0104.0104.0

265.0285.0285.0

2.5002.7102.770

707375

MSW70MSW73MSW75

35.035.035.0

110.0110.0110.0

315.0315.0315.0

3.4103.4103.400

Table continued next column

METRIC BIHEXAGON METRIC BIHEXAGON (cont.)


D Maximum width of head

T Maximum thickness of ring


OAL

A/F

D

T

Table continued next column

A / Finch

MODELNO.

Tinch

Dinch

OALinch

Wt.lbs.

7/815/16

1

ASW14ASW15ASW16

0.7080.7080.708

1.8891.8891.889

7.1657.1657.165

1.3901.3401.320

1.1/161.1/8

1.3/16

ASW17ASW18ASW19

0.7080.7080.708

1.8892.1252.125

7.1657.2837.283

1.3001.3651.200

1.1/41.5/161.3/8

ASW20ASW21ASW22

0.7080.7080.708

2.1252.1252.125

7.2837.2837.283

1.5001.2001.200

1.7/161.1/2

1.9/16

ASW23ASW24ASW25

0.8660.8660.866

2.5192.5192.519

8.4648.4648.464

2.3002.4002.350

1.5/81.11/161.3/4

ASW26ASW27ASW28

0.8660.9840.984

2.5192.9922.992

8.4649.3709.370

2.3003.0803.080

1.13/161.7/8

1.15/16

ASW29ASW30ASW31

0.9840.9840.984

2.9922.9923.149

9.3709.3709.448

3.0803.2303.230

22.1/162.1/8

ASW32ASW33ASW34

0.9840.9840.984

3.1493.1493.149

9.4489.4489.448

3.0802.9303.020

2.3/162.1/4

2.5/16

ASW35ASW36ASW37

1.1021.1021.102

3.4643.4643.700

10.31410.31410.433

4.8404.9704.990

2.3/82.7/162.1/2

ASW38ASW39ASW40

1.1021.1021.102

3.7003.7003.700

10.43310.43310.433

5.0404.7003.080

2.9/162.5/8

2.11/16

ASW41ASW42ASW43

1.1811.1811.181

4.0944.0944.094

11.22011.22011.220

5.8757.5007.500

2.3/42.13/16

2.7/8

ASW44ASW45ASW46

1.3771.3771.377

4.3304.3304.330

12.40112.40112.401

7.5007.1807.195

2.15/163

3.1/16

ASW47ASW48ASW49

1.3771.3771.496

4.3304.3304.960

12.40112.40113.385

7.2007.4009.130

3.1/83.3/163.1/4

ASW50ASW51ASW52

1.4961.4961.496

4.9604.9604.960

13.38513.38513.385

8.9109.1309.350

3.5/163.3/8

3.7/16

ASW53ASW54ASW55

1.4961.4961.653

4.9604.9605.984

13.38513.38515.748

9.5709.6809.460

3.1/23.9/163.5/8

ASW56ASW57ASW58

1.6531.6531.653

5.9845.9845.984

15.74815.74815.748

9.4609.5009.480

3.11/163.3/4

3.13/16

ASW59ASW60ASW61

1.6531.6531.653

5.9845.9845.984

15.74815.74815.748

9.5309.5909.640

A / Finch

MODELNO.

Tmm

Dmm

OALmm

Wt.lbs.

3.7/83.15/16

4

ASW62ASW63ASW64

1.6531.6531.653

5.9845.9845.984

15.74815.74815.748

15.00016.48019.470

4.1/164.1/8

4.3/16

ASW65ASW66ASW67

1.6531.9681.968

5.9846.7716.771

15.74816.14116.141

19.69023.28023.100

4.1/44.5/164.3/8

ASW68ASW69ASW70

1.9681.9681.968

6.7716.7716.771

16.14117.12517.125

22.80024.55024.200

4.7/164.1/24.5/8

ASW71ASW72ASW74

1.9681.9682.204

6.7716.7717.637

17.12517.12518.700

23.98023.67029.480

4.3/44.7/8

5

ASW76ASW78ASW80

2.2042.2042.204

7.6377.6378.070

18.70018.70019.881

29.70037.31036.850

5.1/85.3/165.1/4

ASW82ASW83ASW84

2.2042.2042.204

8.0708.0708.070

19.88119.88119.881

36.63036.52036.520

5.3/85.1/25.5/8

ASW86ASW88ASW90

2.5592.5592.559

9.0559.0559.055

22.24422.24422.244

43.56041.80041.580

5.3/45.7/8

6

ASW92ASW94ASW96

2.5592.5592.559

9.0559.0559.055

22.24422.24422.244

41.56040.81040.370

6.1/86.1/46.3/8

ASW98ASW100ASW102

2.5592.7552.755

9.05510.62910.629

22.24425.00025.000

39.82066.55066.000

6.1/26.5/86.3/4

ASW104ASW106ASW108

2.7552.7552.755

10.62910.62910.629

25.00025.00025.000

65.34065.12064.240

6.7/87

7.1/8

ASW110ASW112ASW114

2.7552.7552.952

10.62910.62911.614

25.00025.00026.771

63.47063.03078.760

7.1/47.3/87.1/2

ASW116ASW118ASW120

2.9522.9522.952

11.61411.61411.614

26.77126.77126.771

78.32078.10078.880

7.5/87.3/4

7.13/16

ASW122ASW124ASW125

2.9522.9522.952

11.61411.61411.614

26.77126.77126.771

77.66077.44076.780

7.7/88

8.1/8

ASW126ASW128ASW130

2.9522.9523.149

11.61411.61412.795

26.77126.77128.543

76.12076.560112.420

8.1/48.3/88.1/2

ASW132ASW134ASW136

3.1493.1493.149

12.79512.79512.795

28.54328.54328.543

111.540110.660110.220

8.5/88.7/8

9

ASW138ASW142ASW144

3.1493.1493.149

12.79512.79512.795

28.54328.54328.543

109.780109.340108.900

STRAIGHT SLUGGING WRENCHES

FRACTIONAL BIHEXAGON FRACTIONAL BIHEXAGON (cont.)

OFFSET SLUGGING WRENCHES

A / Fmm

MODELNO.

Tmm

Dmm

OALmm

Wt.kg.

242730

MOSW24MOSW27MOSW30

20.025.025.0

42.052.052.0

250.0270.0270.0

1.0001.0601.150

323435

MOSW32MOSW34MOSW35

25.025.032.0

52.052.068.0

270.0270.0312.0

1.2901.6401.550

363840

MOSW36MOSW38MOSW40

32.032.032.0

68.068.068.0

312.0312.0312.0

1.5001.7501.950

414346

MOSW41MOSW43MOSW46

32.035.035.0

68.082.082.0

312.0340.0340.0

2.1502.8502.630

474849

MOSW47MOSW48MOSW49

35.035.035.0

82.082.082.0

340.0340.0340.0

2.6102.6002.450

505152

MOSW50MOSW51MOSW52

35.035.038.0

82.082.082.0

340.0340.0360.0

2.3503.1903.000

545556

MOSW54MOSW55MOSW56

38.038.038.0

82.082.082.0

360.0360.0360.0

3.0002.9302.980

575859

MOSW57MOSW58MOSW59

38.038.038.0

82.082.082.0

360.0360.0360.0

4.8504.7504.900

606162

MOSW60MOSW61MOSW62

44.044.044.0

110.0110.0110.0

380.0380.0380.0

4.4304.3504.300

656770

MOSW65MOSW67MOSW70

44.044.050.0

110.0110.0127.0

380.0380.0400.0

5.6505.5007.320

737576

MOSW73MOSW75MOSW76

50.050.050.0

127.0127.0127.0

400.0400.0400.0

7.0006.8806.750

808586

MOSW80MOSW85MOSW86

50.050.057.0

127.0127.0152.0

400.0400.0465.0

8.6307.4809.100

9095100

MOSW90MOSW95

MOSW100

57.057.057.0

152.0152.0152.0

465.0465.0465.0

8.97011.68011.470

105110115

MOSW105MOSW110MOSW115

63.563.563.5

194.0194.0194.0

540.0540.0540.0

12.00011.74011.710

120125130

MOSW120MOSW125MOSW130

63.563.563.5

194.0194.0194.0

540.0540.0540.0

11.55011.25011.050

A / Finch

MODELNO.

Tinch

Dinch

OALinch

Wt.lbs.

15/161

1.1/16

AOSW15AOSW16AOSW17

0.7870.7870.984

1.6531.6532.047

9.8429.84210.629

2.1602.2002.330

1.1/81.3/161.1/4

AOSW18AOSW19AOSW20

0.9840.9840.984

2.0472.0472.047

10.62910.62910.629

2.2202.4202.530

1.5/161.3/8

1.7/16

AOSW21AOSW22AOSW23

0.9841.2591.259

2.0472.6772.677

10.62912.28312.283

4.0703.5203.300

1.1/21.5/8

1.11/16

AOSW24AOSW26AOSW27

1.2591.2591.377

2.6772.6773.228

12.28312.28313.385

3.8904.7304.950

1.3/41.13/16

1.7/8

AOSW28AOSW29AOSW30

1.3771.3771.377

3.2283.2283.228

13.38513.38513.385

4.8406.0506.530

22.1/162.3/16

AOSW32AOSW33AOSW35

1.3771.4961.496

3.2283.2283.228

13.38514.17314.173

6.29013.18013.130

2.1/42.5/162.3/8

AOSW36AOSW37AOSW38

1.4961.4961.732

3.2283.2284.330

14.17314.17314.960

11.96011.55011.180

2.7/162.1/2

2.9/16

AOSW39AOSW40AOSW41

1.7321.7321.732

4.3304.3304.330

14.96014.96014.960

16.94016.94016.830

2.5/82.3/4

2.13/16

AOSW42AOSW44AOSW45

1.7321.9681.968

4.3305.0005.000

14.96015.74815.748

16.28016.10415.730

2.7/82.15/16

3

AOSW46AOSW47AOSW48

1.9681.9681.968

5.0005.0005.000

15.74815.74815.748

15.40015.40015.140

3.1/83.3/83.1/2

AOSW50AOSW54AOSW56

1.9682.2442.244

5.0005.9845.984

15.74818.30718.307

14.74023.50023.430

3.3/43.7/8

3.15/16

AOSW60AOSW62AOSW63

2.2442.2442.244

5.9845.9845.984

18.30718.30718.307

23.21022.55022.220

4.1/84.1/4

4.5/16

AOSW66AOSW68AOSW69

2.4802.4802.480

7.6377.6377.637

21.25921.25921.259

26.40026.29025.830

4.1/24.5/84.3/4

AOSW72AOSW74AOSW76

2.4802.4802.480

7.6377.6377.637

21.25921.25921.259

25.48024.97024.420

4.7/85

5.1/8

AOSW78AOSW80AOSW82

2.4802.4802.480

7.6377.6377.637

21.25921.25921.259

24.20023.87023.430






OAL

A/FD

T

OPEN JAW SLUGGING WRENCHES

A / Fmm

MODELNO.

Tmm

Dmm

OALmm

242730

MOJ24MOJ27MOJ30

171718

585866

175175190

323436

MOJ32MOJ34MOJ36

181820

667378

190200205

384146

MOJ38MOJ41MOJ46

202022

9090100

225225245

505560

MOJ50MOJ55MOJ60

222525

110120130

270300310

657075

MOJ65MOJ70MOJ75

303232

142156164

340370370

808590

MOJ80MOJ85MOJ90

353540

175175197

395395440

95100105

MOJ95MOJ100MOJ105

404848

197230230

440480480

110115120

MOJ110MOJ115MOJ120

505656

238250258

505505530

130135145

MOJ130MOJ135MOJ145

565662

278278308

560560630

150155165

MOJ150MOJ155MOJ165

626270

308308345

630630705

170175180

MOJ170MOJ175MOJ180

707070

345345345

705705705

200215230

MOJ200MOJ215MOJ230

758080

405425475

760830830

A / Finch

MODELNO.

Tinch

Dinch

OALinch

15/161.1/161.1/8

AOJ15AOJ17AOJ18

0.6690.6690.708

2.2832.2832.598

6.8906.8907.480

1.1/41.5/161.3/8

AOJ20AOJ21AOJ22

0.7080.7080.708

2.5982.8742.874

7.4807.8747.874

1.7/161.1/21.5/8

AOJ23AOJ24AOJ26

0.7870.7870.787

3.0713.5433.543

8.0718.8588.858

1.11/161.13/16

1.7/8

AOJ27AOJ29AOJ30

0.7870.8660.866

3.5433.9374.331

8.8589.64610.630

22.1/162.3/16

AOJ32AOJ33AOJ35

0.8660.9840.984

4.3314.7244.724

10.63011.81111.811

2.1/42.3/8

2.7/16

AOJ36AOJ38AOJ39

0.9840.9841.181

5.1185.1185.590

11.81112.20413.385

2.9/162.5/82.3/4

AOJ41AOJ42AOJ44

1.1811.2591.259

5.5906.1416.141

13.38514.56714.567

2.13/162.15/16

3

AOJ45AOJ47AOJ48

1.2591.2591.259

6.4576.4576.457

14.56714.56714.567

3.1/83.3/83.1/2

AOJ50AOJ51AOJ56

1.3781.3781.575

6.8906.8907.756

15.55115.55117.323

3.3/43.7/84.1/8

AOJ60AOJ62AOJ66

1.5751.8901.890

7.7569.0559.055

17.32318.89818.898

4.1/44.1/24.5/8

AOJ68AOJ72AOJ74

1.9682.2042.204

9.3709.84210.157

19.88219.88220.866

4.7/85

5.1/4

AOJ78AOJ80AOJ84

2.2042.2042.204

10.94510.94510.945

20.86622.04722.047

5.3/85.5/85.3/4

AOJ86AOJ90AOJ92

2.2042.4412.441

10.94512.12612.126

22.04724.80324.803

66.1/86.1/2

AOJ96AOJ98

AOJ104

2.4412.4412.756

12.12612.12613.582

24.80324.80327.756

6.7/87.1/87.1/4

AOJ110AOJ114AOJ116

2.7562.7562.756

13.58213.58215.157

27.75627.75629.921

7.5/87.7/8

8

AOJ122AOJ126AOJ128

2.7562.9522.952

15.15715.94515.945

29.92129.92129.921

8.3/88.3/49.1/8

AOJ134AOJ140AOJ146

3.1503.1503.150

16.73217.52018.700

32.67732.67732.677

METRIC SIZES FRACTIONAL SIZES

T

OAL

DA/F



T Maximum thickness






T

D

OAL

A/F

BOX BI-HEX SLUGGING WRENCHES

A / Fmm

MODELNO.

Tmm

Dmm

OALmm

242730

MBSW24MBSW27MBSW30

40.040.040.0

47.047.054.0

180.0180.0195.0

323436

MBSW32MBSW34MBSW36

45.045.045.0

54.054.060.0

195.0195.0200.0

384146

MBSW38MBSW41MBSW46

45.045.050.0

66.066.075.0

220.0220.0230.0

505560

MBSW50MBSW55MBSW60

50.060.060.0

80.088.094.0

245.0260.0270.0

657075

MBSW65MBSW70MBSW75

70.070.080.0

104.0110.0110.0

290.0320.0320.0

808590

MBSW80MBSW85MBSW90

80.090.090.0

126.0126.0152.0

350.0350.0385.0

95100105

MBSW95MBSW100MBSW105

95.095.0105.0

152.0155.0172.0

385.0415.0420.0

110115120


110.0115.0120.0

172.0172.0194.0

440.0440.0485.0

130135145


130.0135.0145.0

205.0205.0230.0

515.0515.0575.0

150155165


150.0155.0165.0

230.0230.0270.0

575.0575.0645.0

170175180


170.0175.0180.0

270.0270.0270.0

645.0645.0645.0

200215230


200.0215.0230.0

295.0325.0325.0

690.0735.0735.0

A / Finch

MODELNO.

Tinch

Dinch

OALinch

15/161.1/161.1/8

ABSW15ABSW17ABSW18

1.5751.5751.575

1.8501.8502.126

7.0867.0867.677

1.1/41.5/161.3/8

ABSW20ABSW21ABSW22

1.7721.7721.772

2.1262.1262.126

7.6777.6777.677

1.7/161.1/21.5/8

ABSW23ABSW24ABSW26

1.7721.7721.772

2.3622.5982.598

7.8748.6618.661

1.11/161.13/16

1.7/8

ABSW27ABSW29ABSW30

1.9681.9681.968

2.9522.9522.952

9.0559.0559.055

22.1/162.3/16

ABSW32ABSW33ABSW35

1.9681.9682.362

3.1493.1493.464

9.6459.64510.236

2.1/42.3/8

2.7/16

ABSW36ABSW38ABSW39

2.3622.3622.362

3.4643.7003.700

10.23610.63010.630

2.9/162.5/82.3/4

ABSW41ABSW42ABSW44

2.7562.7562.756

4.0944.0944.330

11.41711.41712.598

2.13/162.15/16

3

ABSW45ABSW47ABSW48

2.7563.1493.149

4.3304.3304.330

12.59812.59812.598

3.1/83.3/83.1/2

ABSW50ABSW51ABSW56

3.1493.5433.543

4.9614.9615.984

13.77913.77915.157

3.3/43.7/84.1/8

ABSW60ABSW62ABSW66

3.7403.7404.133

5.9846.1026.772

15.15716.33816.535

4.1/44.1/24.5/8

ABSW68ABSW72ABSW74

4.1334.1334.133

6.7726.7727.637

16.53516.53519.094

4.7/85

5.1/4

ABSW78ABSW80ABSW84

4.5274.5274.527

7.6378.0718.071

19.09420.27620.276

5.3/85.5/85.3/4

ABSW86ABSW90ABSW92

4.5274.9214.921

8.0719.0559.055

20.27622.63822.638

66.1/86.1/2

ABSW96ABSW98

ABSW104

5.3145.3145.905

9.0559.05510.630

22.63822.63825.394

6.7/87.1/87.1/4

ABSW110ABSW114ABSW116

5.9055.9055.905

10.63011.61411.614

25.39427.16527.165

7.5/87.7/8

8


5.9055.9055.905

11.61411.61411.614

27.16527.16527.165

8.3/88.3/49.1/8


6.2996.2996.299

12.79512.79512.795

28.93728.93728.937


STRUCTURAL WRENCHES

A / Fmm

MODELNO.

Tmm

Dmm

OALmm

Wt.kg.

242730

MOTOJ24MOTOJ27MOTOJ30

252525

525252

430430430

1.2001.2001.200

323436


253030

526868

430530530

1.2001.4001.400

384146


303038

686882

530530650

1.4001.4002.700

505560


383841

828294

650650710

2.7002.7002.950

A / Finch

MODELNO.

Tinch

Dinch

OALinch

Wt.lbs.

15/161.1/161.1/8

AOTOJ15AOTOJ17AOTOJ18

0.9840.9840.984

2.0472.0472.047

16.92916.92916.929

2.6402.6402.640

1.1/41.5/161.3/8


0.9840.9841.102

2.0472.0472.670

16.92920.87016.929

2.6402.6403.080

1.7/161.1/21.5/8


1.1021.1021.102

2.6702.6702.670

20.86620.86625.590

3.0803.0803.080

1.11/161.13/16

1.7/8


1.4901.4901.490

3.2283.2283.228

25.59025.59022.834

5.9405.9405.940

22.1/162.3/16


1.4901.4901.490

3.2283.2283.228

24.60624.60625.984

5.9405.9405.940

2.1/42.3/8

2.7/16


1.4901.6141.614

3.2283.7003.700

25.98427.95227.952

5.9406.3806.380

METRIC SIZES FRACTIONAL SIZESMETRIC SIZES FRACTIONAL SIZES

DA/F

OAL





D

A/F

OAL

T

A / Fmm

MODELNO.

Tmm

Dmm

OALmm

Wt.kg.

242730

MOTW24MOTW27MOTW30

252525

525252

430430430

1.2001.2001.200

323436

MOTW32MOTW34MOTW36

253030

526868

430530530

1.2001.4001.400

384146

MOTW38MOTW41MOTW46

303038

686882

530530650

1.4001.4002.700

505560

MOTW50MOTW55MOTW60

383841

828294

650650710

2.7002.7002.950

A / Finch

MODELNO.

Tinch

Dinch

OALinch

Wt.lbs.

15/161.1/161.1/8

AOTW15AOTW17AOTW18

0.9840.9840.984

2.0472.0472.047

16.92916.92916.929

2.6402.6402.640

1.1/41.5/161.3/8

AOTW20AOTW21AOTW22

0.9840.9841.102

2.0472.0472.677

16.92916.92916.929

2.6402.6403.080

1.7/161.1/21.5/8

AOTW23AOTW24AOTW26

1.1021.1811.496

2.6772.6773.228

20.86620.86625.590

3.0803.0803.080

1.11/161.13/16

1.7/8

AOTW27AOTW29AOTW30

1.4961.4961.220

3.2283.2282.952

25.59025.59022.834

5.9405.9405.940

22.1/162.3/16

AOTW32AOTW33AOTW35

1.3771.3771377

3.1493.1493.464

24.60624.60625.984

5.9405.9405.940

2.1/42.3/8

2.7/16

AOTW36AOTW38AOTW39

1.3771.6141.614

3.4643.7003.700

25.98427.95227.952

5.9406.3806.380

STRUCTURAL WRENCHES


(OFFSET OPEN JAW TYPE)

(OFFSET RING TYPE)

STRUCTURAL WRENCHES

A / Fmm

MODELNO.

Tmm

Dmm

OALmm

Wt.kg.

242730

MTOJ24MTOJ27MTOJ30

171718

585866

375375375

0.7600.7600.920

323436

MTOJ32MTOJ34MTOJ36

181820

667378

430430530

0.9200.9500.950

384146

MTOJ38MTOJ41MTOJ46

202022

9090100

530530580

1.6501.8501.850

505560

MTOJ50MTOJ55MTOJ60

222525

110120130

625660710

2.2502.2502.250

A / Finch

MODELNO.

Tinch

Dinch

OALinch

Wt.lbs.

15/161.1/161.1/8

ATOJ15ATOJ17ATOJ18

0.6690.6690.708

2.2832.2832.598

14.76314.76314.763

1.6701.6702.000

1.1/41.5/161.3/8

ATOJ20ATOJ21ATOJ22

07080.7080.708

2.8742.8742.874

16.92916.92916.929

2.0002.1502.150

1.7/161.1/21.5/8

ATOJ23ATOJ24ATOJ26

0.7870.7870.787

3.0703.5433.543

20.86620.86620.866

3.5204.1004.100

1.11/161.13/16

1.7/8

ATOJ27ATOJ29ATOJ30

0.7870.8660.866

3.5433.9374.330

20.86622.83422.834

4.9504.9504.950

22.1/162.3/16

ATOJ32ATOJ33ATOJ35

0.8660.9840.984

4.3304.7244.724

24.60624.60625.984

5.6105.6106.000

2.1/42.3/8

2.7/16

ATOJ36ATOJ38ATOJ39

0.9840.9841.181

5.1185.1185.590

25.98427.95227.952

6.0006.2706.270

STRUCTURAL WRENCHES

A / Fmm

MODELNO.

Tmm

Dmm

OALmm

Wt.kg.

242730

MTW24MTW27MTW30

171718

474754

375375375

0.7600.7600.920

323436

MTW32MTW34MTW36

181820

545460

430430530

0.9200.9500.950

384146

MTW38MTW41MTW46

222225

666675

530530580

1.6501.8501.850

505560

MTW50MTW55MTW60

252628

808894

625660710

2.2502.2502.250

A / Finch

MODELNO.

Tinch

Dinch

OALinch

Wt.lbs.

15/161.1/161.1/8

ATW15ATW17ATW18

0.6690.6690.708

1.8501.8502.125

14.76314.76314.763

1.6701.6702.000

1.1/41.5/161.3/8

ATW20ATW21ATW22

0.7080.7080.708

2.1252.1252.125

16.92916.92916.929

2.0002.1502.150

1.7/161.1/21.5/8

ATW23ATW24ATW26

0.7870.8660.866

2.3622.5982.598

20.86620.86620.866

3.5204.1004.100

1.11/161.13/16

1.7/8

ATW27ATW29ATW30

0.9840.9840.984

2.9522.9522.952

20.86622.83422.834

4.9504.9504.950

22.1/162.3/16

ATW32ATW33ATW35

0.9840.9841.023

3.1493.1493.464

24.60624.60625.984

5.6105.6106.000

2.1/42.3/8

2.7/16

ATW36ATW38ATW39

1.0231.1021.102

3.4643.7003.700

25.98427.95227.952

6.0006.2706.270


METRIC SIZES FRACTIONAL SIZES

D A/F

OAL

D

A/F

OAL

T





(FLAT RING TYPE)

(FLAT OPEN JAW TYPE)

INSERT SOCKETS

A / Fmm

MODELNO.

Tmm

Bmm

Dmm

OALmm

242730

MIS24MIS27MIS30

15.016.017.0

162022

39.043.047.0

41.043.046.0

323436

MIS32MIS34MIS36

18.019.020.0

242426

49.062.054.0

49.051.053.0

384146

MIS38MIS41MIS46

21.023.025.0

282933

57.061.067.0

55.061.067.0

505560

MIS50MIS55MIS60

27.029.032.0

363840

74.080.086.0

74.080.086.0

657075

MIS65MIS70MIS75

34.035.039.0

454852

92.099.0105.0

93.099.0103.0

808590

MIS80MIS85MIS90

40.042.045.0

556064

111.0117.0125.0

108.0112.0119.0

95100105

MIS95MIS100MIS105

48.050.051.0

687276

131.0137.0143.0

125.0130.0134.0

110115120

MIS110MIS115MIS120

53.054.057.0

808590

150.0156.0162.0

141.0147.0154.0

130135145

MIS130MIS135MIS145

60.064.068.0

95100105

175.0181.0194.0

161.0168.0175.0

A / Finch

MODELNO.

Tinch

Binch

Dinch

OALinch

15/161.1/161.1/8

AIS15AIS16AIS18

0.5910.6300.669

0.6290.7870.864

1.5351.6931.850

1.6101.6901.810

1.1/41.5/161.3/8

AIS20AIS21AIS22

0.7090.7480.787

0.9950.9451.000

1.9292.0472.126

1.9302.0102.090

1.7/161.1/21.5/8

AIS23AIS24AIS26

0.7870.8270.906

1.0001.1021.181

2.1262.2442.402

2.0902.1702.400

1.11/161.13/16

1.7/8

AIS27AIS29AIS30

0.9840.9841.065

1.1811.2991.299

2.5222.6382.750

2.6402.6402.910

22.1/162.3/16

AIS32AIS33AIS35

1.0631.1421.142

1.4171.4171.496

2.9133.0003.150

2.9103.1503.150

2.7/162.9/162.5/8

AIS39AIS41AIS42

1.2601.3391.339

1.6001.7701.700

3.4853.6223.720

3.3903.6603.660

2.3/42.13/162.15/16

AIS44AIS45AIS47

1.3781.3781.535

1.8901.9502.000

3.8983.9984.134

3.9003.9004.060

33.1/83.3/8

AIS48AIS50AIS54

1.5351.5751.654

2.1002.1502.450

4.2354.3704.720

4.0604.2504.410

3.1/23.3/43.7/8

AIS56AIS60AIS62

1.7721.8901.969

2.4502.7002.700

4.9215.1575.394

4.6904.9205.120

4.1/84.1/44.1/2

AIS66AIS68AIS72

2.0082.0872.160

2.9003.0003.000

5.6306.9066.142

5.2805.5505.790

4.5/84.7/8

5

AIS74AIS78AIS80

2.2242.3622.362

3.1963.4463.446

6.3786.7506.820

6.0606.3406.340

5.1/45.3/8

AIS84AIS86

2.5202.520

3.7253.735

7.1307.250

6.6106.610

5.5/85.3/4

AIS90AIS92

2.6672.677

3.8853.985

7.6407.780

6.8906.890


Note: Insert sockets are also made to different

female hex for any one suitable male hex

as per requirement.


D Max. outside dia. socket end

B Bolt clearance hole


T Hex bit length

D

OAL

T

B

A/F

B


B Bolt clearance hole


B B

OAL OAL

D D

TURBINE TOOLS

NOMINALSIZE

MODELNO.

Binch

Dinch

OALinch

Wt.Kg.

2.1/42.1/22.3/4

141B8001141B8002141B8003

2.1/82.3/82.5/8

3.1/23.7/84.1/4

3.5/83.7/84.3/8

2.5303.3006.200

33.1/2

4

141B8004141B8005141B8006

1.7/81.3/81.7/8

4.5/85.3/86.1/8

4.3/85.3/85.7/8

6.80010.80015.650

4.1/25

5.1/2

141B8007141B8008141B8009

4.3/82.1/83.5/8

6.7/87.5/88.3/8

6.5/87.1/88.1/8

18.89029.00038.500

62.1/22.1/2

141B8010141B8011141B8012

3.7/82.3/82.3/8

9.1/43.7/83.7/8

8.5/81824

50.00012.50018.900

3.3/447

141B8013141B8014141B8015

1.13/161.7/84.7/8

5.3/46.1/810.5/8

5.5/823.5/8

10

15.00079.0008.600

1.3/424

141B8016141B8017141B8018

1.5/81.7/83.7/8

2.3/43.1/86.1/8

2.5/82.7/8

23.5/8

1.1501.630

52.000

43.1/2

141B8019141B8020

3.7/83.3/8

6.1/85.3/8

5.7/85.3/8

11.8408.500

A / Finch

MODELNO.

Tinch

Dinch

OALinch

Wt.Kg.

1.11/161.7/8

2.1/16

M968914M968915M968916

7/81

1.1/16

2.5/82.5/82.7/8

2.3/82.5/8

2.15/16

0.7200.9601.325

2.1/42.7/162.5/8

M968917M968918M968919

1.1/81.1/4

1.5/16

3.1/83.5/83.5/8

3.1/83.5/8

3.9/16

1.6402.0002.480

2.13/163

3.3/8

M968920M968921M968922

1.3/81.1/21.5/8

3.7/84.1/84.5/8

3.3/44

4.3/8

2.8503.2403.720

3.3/44.1/84.1/2

M968923M968924M968925

1.7/82

2.1/8

5.1/85.3/46.1/8

4.7/85.1/45.3/4

6.3108.50010.710

4.7/85.1/45.5/8

M968926M968927M968928

2.3/82.1/22.5/8

6.5/87.1/87.3/4

6.1/46.5/87.1/8

12.80016.00020.000

66.3/47.1/2

M968929M968930M968931

2.3/43

3.1/2

8.1/89.1/810.1/8

7.1/28.3/89.1/2

24.00029.00034.000

NOMINALSIZE

MODELNO.

Binch

Dinch

OALinch

Wt.Kg.

2.3/43

3.1/2

141B8101141B8102141B8103

2.5/82.7/83.3/8

4.1/44.5/85.3/8

11.1/812.5/1613.7/8

3.2004.0006.500

44.1/2

5

141B8104141B8105141B8106

3.7/84.3/84.7/8

6.1/86.7/87.5/8

15.1/1616.7/1618.1/18

8.00010.00013.500

5.1/26

2.1/4

141B8107141B8108141B8109

5.3/85.7/82.1/8

8.3/89.1/43.1/2

19.3/1620.5/810.1/8

15.00019.0002.600

2.1/23.3/41.3/4

141B8110141B8111141B8112

2.3/83.13/16

1.5/8

3.7/85.3/42.3/4

10.1/414.3/8

8.13/16

3.1007.8002.100

3.1/810.5/8

141B8113141B8114

1.7/86.7/8

3.1/810.5/8

10.1/222.5/16

2.50030.000

SPANNER WRENCH SOCKET

WRENCH SOCKET

SPANNER SLEDGING WRENCH


B Maximum thickness of ring


D

OAL

T

BD

OAL


B Maximum thickness of ring


229, Pragati Industrial Estate, 316, N. M. Joshi Marg, Bombay - 400 011. INDIA.Phone: +91.22.43453100 Fax: +91.22.2307 3761 email: [email protected]

POWERMASTER ENGINEERS PVT. LTD.

t ubeex pande rs . c om t ubec l eane rs . c om i m pac t s oc k e t . c om s p r i ngba l anc e rs . c o m

Documents

IMPACT SOCKETS & SLUGGING WRENCHES - … SOCKETS & SLUGGING WRENCHES ... Deep and Thinwall Sockets Up to 3.1/2" square drive Impact Sockets through to 235MM ... inch MODEL NO. D1 inch