GLASS MOSAIC T ILES

austral ia

setting the industry standards

GUIDE TO BUILDING CONCRETE POOLS

Ph: 1300 EUROPE www.europeimports.com.au

“FOR SOLUTIONS SET IN TILE AND STONE”

SECTION

SECTION HOW TO AVOID COSTLY MISTAKES WHEN FULLY TILING YOUR POOL

AWARDWINNING

TILES

AWARDWINNINGCOMPANY

INCLUDES

COLOUR PALETTE

GUIDE

importers of Qualit y

2

1

EZARRI TILERANGE: NIEBLATILE: 2562-B, 25mm

pds

PAGE 2 ABOUT EUROPE IMPORTS

PAGE 3 POOL AESTHETICS & DESIGN CHOICES

PAGE 4 WHAT TYPE OF POOL DO I WANT?

PAGE 5-6 SHOULD I FULLY TILE MY POOL?

PAGE 7 DO I WANT TO USE A EXTERNAL ARCHITECT OR A POOL BUILDER’S DESIGN SERVICE?

PAGE 8 WHAT DO I NEED TO KNOW ABOUT CHOOSING FINISHING MATERIALS? DESIGN CONSIDERATIONSPAGE 9-10 MISCONCEPTIONS ABOUT HOME OWNER BUILDING

PAGE 11-12 HOW TO CHOOSE A POOL BUILDER

PAGE 13 WHAT TO EXPECT DURING CONSTRUCTION OF A BASIC POOL

PAGE 14 POSSIBLE DELAYS OR UNFORESEEN COSTS INVOLVED IN CONSTRUCTION

PAGE 15 TIPS TO ENSURE A TROUBLE FREE CONSTRUCTION

PAGE 16 ASPECTS OF THE CONSTRUCTION THAT YOU MAY BE RESPONSIBLE FOR

PAGE 17 DEVELOPMENT APPLICATION EXPLAINED (COUNCIL REQUIREMENTS)

PAGE 18 PREPARATION OF PLANS & DRAWINGS

PAGE 19 RELEVANT INFORMATION ABOUT HOME WARRANTY INSURANCE IN NSW

PAGE 20 SWIMMING POOL SAFETY

PAGE 21 SPASA (SWIMMING POOL & SPA ASSOCIATION OF NSW & ACT) CONTRACT CHECKLIST

PAGE 22 ABOUT EZARRI GLASS MOSIAC TILES

PAGE 23 3 STEPS TO SUCCESSFUL POOL TILING

PAGE 24 ENVIRONMENTAL

PAGE 25-26 EZARRI JOINTPOINT® METHOD

PAGE 27 TECHNICAL OPINION

PAGE 28 CASE STUDY

PAGE 29 THERE IS ONLY ONE EZARRI MOSAIC

PAGE 30 ABOUT EZZARI MOSAIC TILES

PAGE 31 ENDORSEMENTS

PAGE 32-34 INSPIRATIONS

PAGE 35-38 POOL & DECOR COLOUR PALETTE

CONTENTS OF THIS GUIDE

SECTION 2 - CONTENT

SECTION 1 - CONTENTGUIDE TO BUILDING CONCRETE POOLS

HOW TO AVOID COSTLY MISTAKES WHEN FULLY TIL ING YOUR POOL

This guide is to assist you in gaining a good understanding of what areas you should consider before approaching a pool builder to commence your new construction or renovation of a pool.

Each section is elaborated and will become an excellent tool that will lead to a successful project.

1

EZARRI RANGE: NIEBLATILE: 2520-A, 25mm

EZARRIRANGE: IRISTILE: GREEN PEARL 25mm

PAGE 22 ABOUT EZARRI GLASS MOSIAC TILES

PAGE 23 3 STEPS TO SUCCESSFUL POOL TILING

PAGE 24 ENVIRONMENTAL

PAGE 25-26 EZARRI JOINTPOINT® METHOD

PAGE 27 TECHNICAL OPINION

PAGE 28 CASE STUDY

PAGE 29 THERE IS ONLY ONE EZARRI MOSAIC

PAGE 30 ABOUT EZZARI MOSAIC TILES

PAGE 31 ENDORSEMENTS

PAGE 32-34 INSPIRATIONS

PAGE 35-38 POOL & DECOR COLOUR PALETTE

GUIDE TO BUILDING CONCRETE POOLS

ABOUT

Europe Imports is a family owned and operated business exclusively importing the prestigious high quality “Ezarri” Glass Mosaic Tiles. The company was founded by Paula Cowell-Yench in 2004 and then joined by her son Carl Yench in 2006. Paula and Carl have grown the business and brand awareness of Ezarri throughout Australia, NZ and parts of South East Asia.

Europe Imports is a company that has been built on a foundation of trust, integrity, quality assurance, technical experience and high customer service values. This foundation has escalated the company and the Ezarri brand into the number one

position and has become a prominent leader in the pool tile surfacing industry. This is a sure sign that you are dealing with a reputable and solid company with values. Europe Imports was given the “Industry Achievement Award in 2014” an award which was proudly accepted and appreciated.

Our goal is to service the industry with high quality products and services. We pride ourselves on delivering this and Client satisfaction is our reward.Directors Paula Cowell Yench Carl John Yench

Mission Statement“Europe Imports’ mission is to supply the tiling and building industries with high quality and stunning products that are not only visually beautiful, but also suitable for their intended application. We will supply the industry with an outstanding customer service, satisfaction-driven solutions and we will support our customer’s, and their clients, with professional design services and advice for their projects, all of which we aim to exceed expectations.

“We have always, and will always, operate our family business with a core focus on building a strong, respectable and ethical industry reputation.”

Directors Paula Cowell-Yench & Carl John Yench

The Spanish Glass Mosaic supplier Ezarri have had over 32 years’ experience in manufacturing their fine mosaics, and export to over 70 countries world-wide. Their invention of the innovative JointPoint® sheet panelling system has cemented Ezarri as industry leader in a safe and proven tile application backing system. Europe Imports are proud to be the exclusive importer and distributor of Ezarri Glass mosaic tiles and are now the largest importer of superior glass mosaics in Australia today.

PDS (Poolside Design & Supply) is a division of Europe Imports and offers an expert design service on behalf of the builders that can alleviate the headaches that product selection can cause. PDS also offers a full supply of surfacing materials such as Ezarri glass mosaics, Natural stone such as Travertine & Granite, also adhesives, designer grouts and sealing products. This service is designed to help the client paint the picture of their dream pool and offer the convenience of a one-stop shop that supplies high quality products. The PDS services offer the complete solution and will give you the confidence to you know you are dealing with a reputable and highly respected company.

GLASS MOSAIC T ILES

GLASS MOSAIC T ILES

2

Swimming Pool & Spa Association (NSW & ACT)

Australian Stone Advisory Association

Australian Tile Council

Master Builders Association

EZARRI RANGE: DECO MIXTILE: 2518-B, 25mm

pds

pds

Tiles & Tiling Industry Association Australia

There are many wonderful benefits of building a concrete swimming pool and one of the great benefits is definitely the design possibilities, in this sense we are only limited to our imaginations!

Concrete pools have the ability to create atmosphere, and integrate seamlessly with landscape and homes or even create a feature that becomes a focal point of your whole property.

As the design possibilities are virtually endless, a concrete pool can become an expression of your creativity which allows the owner to reflect their own personality through construction.

One of the more obvious benefits of building a concrete pool is the extended life of the structure itself. Although conditions vary from place to place, concrete in ground pools can withstand the harshest regional climatic conditions and they make a wise choice regardless of a homeowner’s location. A well-built concrete pool will last many years and will maintain its integrity throughout its life. They can also be renovated at any stage should the owner decide to include further additional features or perhaps change the appearance or surfacing materials to a more modern look.

ONE OF THE MORE OBVIOUS BENEFITS OF BUILDING A CONCRETE POOL IS THE EXTENDED LIFE OF THE STRUCTURE ITSELF.

Being able to create a beautiful, personally designed concrete pool that integrates seamlessly with your property has other advantages than just pure aesthetics. A well-built concrete pool will last a life time and when that pool is also well designed plus you have chosen the finishing items that reflect the investment into the project such as Ezarri tiles, it will increase your property value by what was initially invested and will also serve as a major selling point if you ever decided to sell the property.

BEING ABLE TO CREATE A BEAUTIFUL, PERSONALLY DESIGNED CONCRETE POOL THAT INTEGRATES SEAMLESSLY WITH YOUR PROPERTY HAS OTHER ADVANTAGES THAN JUST PURE AESTHETICS.

LAP SWIMMING POOL SWIM JET POOL OR SPAS LEISURE POOLS

3

AESTHETICS & DESIGN

DESIGN IS ONLY LIMITED BY YOUR IMAGINATION

LONGEVITY RESALE VALUE

SECTION

GUIDE TO BUILDING CONCRETE POOLS1

EZARRIRANGE: LISATILE: 2545-A, 25mm

EZARRIRANGE: IRISTILE: AZUR 25mm

EZARRIRANGE: NIEBLATILE: 2505-A, 25mm

THERE ARE MANY DIFFERENT USES AND FUNCTIONS OF A SWIMMING POOL BUT THE MOST IMPORTANT ELEMENT WHEN DECIDING WHAT KIND OF POOL YOU WANT IS HOW YOUR NEW POOL WILL FIT YOUR LIFESTYLE. TAKE A MINUTE TO THINK ABOUT THE BASIS OF YOUR DESIGN FOR YOUR POOL.

LAP SWIMMING POOLLong and narrow pools designed for the avid swimmer or active persons/families that have the main functionality of swimming laps.

LEISURE POOLS DESIGNER POOLS HYDROTHERAPY POOLS PLUNGE POOLS

LEISURE POOLS Pools that are generally designed for various leisure activities which may include shallow areas for children, a deep end for jumping, a spa for relaxing or a very shallow areas with sunbathing chairs. Leisure pools can also have incorporated lap swimming areas or jet functions.

HYDROTHERAPY POOLHydrotherapy pools are specially designed for hydrotherapy exercises carried out in a specially heated pool. The water is approximately 34 degrees Celsius. The combination of extra heat and the buoyancy of the water provide a relaxing medium in which pain relieving exercises can be carried out and thus improve general fitness levels.

PLUNGE POOL Generally a very small pool that is designed to fit in a more restricted space. Plunge pools are generally a simplistic design that merely offers a smaller area to cool off in.

DESIGNER POOLDesigner pools are often designed purely to be a show piece or design feature of a beautiful home, these pools generally focus mainly on the look of the pool and less on functionality.

4

WHATTYPE OF POOL DO I WANT?

BUDGET

YOUR BUDGE T WILL BE A HUGE DE TERMINING FAC TOR IN YOUR CHOICES, IT CAN EITHER TOTALLY LIMIT YOUR OPTIONS OR OPEN UP ENDLESS POSSIBILITIES.

The budget will also reflect the quality of the finished construction/product.

A good point to think about when deciding your budget, is that, when you build a quality pool using the best products your pool will last a lifetime before you will need to even consider renovating. As a result of this longevity, your property value could hold a heightened value for much longer.

EZARRIRANGE: NIEBLATILE: 2505-A, 25mm

EZARRIRANGE: NIEBLATILE: 2508-A WALLS, 2508-A ANT-SLIP FLOOR25mm EZARRI

RANGE: IRIS MIXTILE: ATLANTIC 25mm

5

SHOULD I FULLY TILE MY POOL?

FULLY TILING YOUR POOL WILL NOT ONLY GIVE YOU THE MOST AESTHETICALLY PLEASING RESULT, FULLY TILING WILL ALSO OFFER OTHER GREAT BENEFITS THAT YOU WILL ENJOY FOR YEARS TO COME.

the answer isyes!EZARRIRANGE: IRISTILE: OCEAN 25mm

Ezarri Tiles can give complimentary style to your home and could enhance the visual beauty of your pool area by creating a stunning masterpiece that becomes the highlight of your property. With Ezarri mosaics, you have the opportunity to create visual effects that only an Ezarri mosaic can provide.

The Ezarri glass mosaics are guaranteed for quality by Europe Imports and are backed with guaranteed installation specifications from major adhesive companies for up to 25 years! Having a superior finish installed in your pool such as Ezarri will serve as a selling point for your home. Having a long-lasting finish will also assist in maintaining the value of your pool for many more years when compared to other finishes.

Ezarri also produce a large range of SAFE-STEPS mosaics suitable for areas that are of high risk of slipping. Areas such as step edges, spas and walk in areas are the most common areas that you may slip. Ezarri have the advantage of added safety with the “C” rated antislip range.

The JointPoint® tile backing system (the joints holding the tiles together), is by far the most effective system for swimming pool application which allows the tile to receive over 92% adhesion to the back of the tile, whilst still allowing proper curing of the adhesive and alignment of tiles. The main point to remember is that the longer that the pool finish stays perfect, the less cost there will be in maintenance or repairs.

As glass has a great resistance to bacteria, mould and algae, by covering 90-95% of your pool with glass mosaics you are greatly reducing that surface area that they can cling to which will keep nasties moving through your filtration system and out of the water. The use of epoxy grouts will also assist with water sanitation.

EZARRI GLASS MOSAICS ARE AVAILABLE IN THOUSANDS OF COLOUR COMBINATIONS AND EFFECTS WHICH OFFER ENDLESS DESIGN POSSIBILITY FOR YOUR PROJECT.

BY USING EZARRI GLASS MOSAICS, YOUR POOL WILL BE TILED WITH AN ICONIC AND STUNNING GLASS MOSAIC THAT WILL LOOK LIKE NEW FOR MANY YEARS TO COME.

ALL EZARRI GLASS MOSAICS ARE MANUFACTURED WITH A ROUNDED SOFT EDGE THAT ELIMINATE THE ISSUE OF CUTS AND ABRASIONS THAT ARE POSSIBLE WITH SHARP EDGE MOSAICS.

AS TOUCHED ON IN THE RE-SALE VALUE INFORMATION, WHEN YOU CHOOSE EZARRI GLASS MOSAICS FOR YOUR POOL, YOU HAVE WILL CHOSEN THE BEST POSSIBLE TILE THAT WILL BE GUARANTEED TO ADHERED TO THE WALL FOR A LIFETIME.

A SWIMMING POOL OR SPA THAT IS FULLY TILED WITH GLASS MOSAICS WILL PROVIDE A LOW MAINTENANCE FINISH MATERIAL THAT IS CONSIDERED THE EASIEST SURFACE TO CLEAN.

AESTHETICS

RESALE VALUE

SAFETY

LONGEVITY

MAINTENANCE

6

yes!

EZARRIRANGE: LISATILE: 2545-A, 25mm

Often a new pool will be built at the same time as a new property in which the owner has employed the services of an architect already and the architect may then be involved in the design of the swimming pool. In this scenario, it is always a good idea to have your builder involved in meetings with the architect to ensure that the designs that are produced are practical for the builder to complete.

When building a pool in an existing property you may not wish to

employ the services of an external architect. The builder’s internal design service can offer a simple alternative that can ensure a clean communication and direction with the pool design.

There can be pro’s and con’s for either scenario, you should weigh up the options and discuss them accordingly with your builder and decide what works best for you. Often your budget will make the decision for you.

MANY POOL BUILDERS ARE ABLE TO OFFER DESIGN SERVICES TO HELP INCORPORATE YOUR POOL DESIGN BUT YOU MAY WISH TO EMPLOY THE SERVICES OF AN EXTERNAL ARCHITECT TO DESIGN YOUR POOL, THE CHOICE IS YOURS.

DO I WANT TO USE AN EXTERNAL ARCHITECT OR A POOL BUILDER’S DESIGN SERVICE?

POOL BUILDER OR ARCHITECT?

7

EZARRIRANGE: METALLICATILE: LAVA 25mm

EZARRIRANGE: IRISTILE: PERLA 25mm

8

IF YOU DECIDE TO CHOOSE YOUR OWN FINISHING MATERIALS, UNDERSTAND THAT CHOOSING FINISHING MATERIALS CAN BE VERY DAUNTING AS THERE ARE SO MANY PRODUCTS ON THE MARKET THAT MAY NOT BE SUITABLE FOR CERTAIN APPLICATIONS.

CHOOSING INCORRECT FINISHING PRODUCTS FOR YOUR POOL INTERNAL OR EXTERNAL AREAS COULD CAUSE VERY COSTLY FAILURES THAT YOUR BUILDER WILL NOT BE RESPONSIBLE FOR IF THEY HAVE ADVISED YOU AGAINST USING THOSE PARTICULAR PRODUCTS.

There are many product performance and design considerations that need to be made when selecting materials and this is where you should be consulting with professionals. Design considerations can range from percentage of available sky, sun aspect, surrounding foliage, depth of pool, landscape design, house colour/design or even just how the addition of water to a chosen tile will affect the water colour. Performance considerations can range from product suitability to the Australian standards, stone density, sealing requirements to eliminate corrosion or even salt attack.

Poolside design & supply is a division of Europe Imports Pty Ltd who import Ezarri glass mosaics, natural stones, adhesives, grouts and sealers. We are the largest premium pool mosaic importer in Australia and we offer over 12 years of finishing material design experience. With our knowledge, involvement in the industry and exposure to the best finishing products, we can help you complete your dream project.

WHAT DO I NEED TO KNOW ABOUT CHOOSING FINISHING MATERIALS?

MOSAICS AND STONE

MODERN STYLE

COLONIAL STYLEAlternatively on the other end of the spectrum, you may have purchased, own or have built a colonial style home with many of beautiful windows and balconies that shows off a more traditional look, you may then wish to design a pool to suit. More traditional designs for the pool may be considered that could include overhanging wooden pergola with similar design to the house and more traditions surfacing materials such as beautiful beige French pattern travertine with a beautiful white mosaic which provides a delicate light blue colour to the water.

If you have just finished building your dream modern or contemporary style house that is very symmetrical with the multiple block shape, you would consider having a more modern style symmetrical pool that would complement the new home. Some ideas for a modern style home with symmetrical design may include raised square spa adjoining the pool or raised pool with infinity edge facing the house. Often in these modern contemporary style home there are grey tones incorporated and the design of the pool may then include some bolder material selections that complement such as rectangle silver travertine in a brick pattern complimented by a grey mosaics which gives off a more cooler looking blue grey water.

DESIGN CONSIDERATIONS

EZARRIRANGE: IRISTILE: OCEAN 25mm

EZARRIRANGE: DECO MIXTILE: 2518-B, 25mm

ONE OF THE MOST COMMON MISCONCEPTIONS ABOUT OWNER BUILDING IS THAT YOU WILL SAVE MONEY.

OFTEN THIS IS NOT THE CASE AND IN A LOT OF CIRCUMSTANCES, THE PROJECT BUDGET IS COMPLETELY BLOWN DUE TO THE OWNER BUILDER’S LACK OF EXPERIENCE IN THE CONSTRUCTION OF A POOL.

IF YOU BECOME AN OWNER-BUILDER, YOU WILL BE TAKING ON FULL LEGAL AND FINANCIAL RESPONSIBILITY FOR THE PROJECT AND THIS STEP SHOULD NOT BE TAKEN LIGHTLY.

MISCONCEPTIONS ABOUT HOME OWNER BUILDING

9

EZARRIRANGE: SPACETILE: CAPRICORN 25mm

10

DO YOUR SUMS BEFORE YOU START AND ASK YOURSELF IF ANY SAVING YOU WILL MAKE IS WORTH THE TIME AND RESPONSIBILITY IT WILL TAKE. AS AN OWNER-BUILDER YOU ARE GUARANTEEING THE WORK YOU UNDERTAKE.

It is an offence under the Home Building Act (maximum penalty $22,000) for the holder of an owner-builder permit to:

• Knowingly engage an unlicensed contractor

• Lend your permit to another person

• Refuse to disclose to an authorized officer the names and addresses of contractors working on the site.

RESPONSIBLITIES YOU MAY NOT BE AWARE OF AS A H.O.B.As an owner-builder, you will be responsible for:

• Overseeing and supervising all tradespeople

• Ordering of materials and management of the building site

• Obtaining all necessary council and authority approvals

• Ensuring that the financial, taxation and insurance requirements of the building work are met and fully comply with all laws

• Being aware of your obligations under the Workers Compensation Act 1987 and Occupational Health and Safety Act 2000 and providing a safe work environment that complies with WorkCover requirements

• Ensuring any contractor engaged is appropriately licensed and insured to do the work contracted for

• Warranting that the work and materials will be fit for the purpose and that the work results in a dwelling fit for occupation.

EUROPE IMPORTS DO NOT RECOMMEND HOME OWER BUILDING (HOB), WE RECOMMEND USING PROFESSIONAL POOL BUILDERS TO COMPLETE YOUR PROJECT.

AWARDWINNING

EZARRIRANGE: IRIS MIXTILE: ARCTIC DARK 25mm

EZARRIRANGE: AUSTRALIAN DESIGNER

TILE: HARBOUR 25mm

ALWAYS USE THE RIGHT BUILDER FOR AN AWARD

WINNING RESULT

11

AWARDS – INDUSTRY AWARDSIndustry awards of excellence are given by industry organisations (such as the Master Builders Australia, Swimming Pool & Spa Association of NSW & ACT or the Australian Tile Council) over hundreds of categories each year. These awards are a great way to find a builder that specialise in the type of project that you would like to build. Recipients of awards are mentioned on each organisations website each year and are usually also promoted on each builders website also.

EXPERIENCEExperience comes in many forms and it is not only related to the age of the company or the person building your pool. Often successful companies hold their experience as a collective between groups of professionals that have worked in the industry for a period of time. There are also young professionals that retain experience that has been handed down from previous generations of builders. Asking where a builders experience comes from will help you understand their level of knowledge.

CHOOSING THE RIGHT BUILDER FOR A PROJECT IS A VERY IMPORTANT ELEMENT WHEN IT COMES TO CONSTRUCTION. SOME BUILDERS SPECIALIZE IN PARTICULAR KINDS OF CONSTRUCTION AND IT IS CRUCIAL TO YOUR PROJECT THAT YOU CHOOSE A BUILDER WHO POSSESSES THE SKILLSET REQUIRED FOR YOUR NEEDS.

IF YOU ARE UNCERTAIN ABOUT WHAT IT IS THAT YOU ARE AFTER, YOU CAN ALWAYS DISCUSS YOUR PROJECT WITH A FEW PROFESSIONALS TO GET IDEAS ABOUT WHAT YOU ARE ABLE TO BUILD WITHIN YOUR BUDGET AND PROPERTY.

HOW TO CHOOSE A POOL BUILDER

MAKE SURE YOUR TILER IS A LICENCED TILER

IF YOU TAKE THE TIME TO REALLY THINK ABOUT YOUR NEEDS, YOU MAY SAVE YOUR OWN TIME IN FINDING THE RIGHT BUILDER FOR YOUR PROJECT. IN THE FOLLOWING PAGES YOU WILL FIND ASPECTS THAT SHOULD BE CONSIDERED BEFORE SIGNING A CONTRACT WITH ANY BUILDER.

THEY MAY HELP YOU DETERMINE WHETHER OR NOT A PARTICULAR BUILDER IS SUITABLE FOR YOUR PROJECT. MAKE SAFE DECISIONS TO ENSURE A TROUBLE FREE PROJECT.

AWARDWINNING

TILESAWARD

WINNINGCOMPANY

EZARRIRANGE: IRISTILE: OCEAN 36mm

12

MEMBERSHIPS–SPASA/MBA Many quality companies are often involved with industry organisations such as the Swimming Pool & Spa Association (NSW & ACT) and Master Builders Association. These organisations exist purely to benefit and improve the building industry as a whole. However, there are many excellent companies that choose not to affiliate with industry organisations and this is not necessarily a sign of less quality workmanship or ethical standards. Your decisions should be based also on referrals, guarantees, thorough research and personal preference. Do your investigations always before choosing a builder to ensure your complete satisfaction.

REFERENCES – CLIENTSWord of mouth business is the best form of advertising for any company, and most companies (depending on the privacy of their work) should be able to supply you with the details of their latest and or oldest customers for you to speak with in regards to the builders work.

ABILITYDifferent builders hold different skill sets and it is important that your builder is experienced in the type of construction that you are engaging. If you were building an overhanging swimming pool on the edge of a cliff, the construction would require a heavy degree of engineering. In this scenario it would be wise to employ the services of a builder with experience in this kind of construction.

LICENSINGYou may wish to ask builders to show you that all of their licenses and insurances are up-to-date and relevant to the work that you are asking them to carry out before you sign a contract. Always be sure that the builder possesses the appropriate licenses for the scope of work involved.

COMMUNICATION SKILLSIf you asked any customer of a successful pool builder, what they enjoyed the most about the process, they will be sure to answer that it was the communication from the builder that made their experience enjoyable. This is because communication is one of the most important keys to ensuring a successful outcome. Be sure to discuss your expectations relating to communications with your builder.

HONESTY AND ETHICAL CONDUCTNo-one wants to be caught by surprise with hidden costs or processes which were not initially discussed prior to signing the contract. An honest and ethical builder will be sure that you are aware of all possible costs relating to your construction before signing the contract. Always be sure to read literature thoroughly as often there are many considerations that are overlooked in the initial stages. When checking references you may wish to ask how your chosen builder relayed this information to them and how any issues may have been handled.

EZARRIRANGE: IRISTILE: PERLA 25mm

13

EXCAVATION An access way to your site will be made to begin excavation. The pool layout will be marked so that you can protect any trees or areas from being affected by the pool and then the heavy equipment will be brought in to dig the hole. NOTE: Underground utilities will need to be checked before the digging begins. For more information visit “Dial Before You

Dig” at: www.1100.com.au..

STEEL WORKOnce the excavation has been completed and before concrete can be sprayed, the structure will be reinforced with steel rods for structural integrity and this steel work also assists in forming the pool shape.

PLUMBINGThe plumbing work will co-inside with the steel frame and all pipes will be finished with plumbing cap ends before concrete can be sprayed. The equipment will also be put into place to be eventually connected with the plumbing work.

PAVING/DECKINGAfter the steel and plumbing has been set into place you will then have concrete sprayed and shaped to form your pool base. The concrete will have to cure for around 4 weeks depending on the time of year.

POOL BARRIER INSTALLATIONIf contracted by the builder, the pool fence will be installed, otherwise the owner will organise this. It is required by law that the pool fencing is installed and certified before the pool can be filled.

WATER PROOFING & RENDERINGDepending on the project and the products being used, this is the stage where the pool will be rendered to a smooth finish and then waterproofed. If your builder is not waterproofing your pool you may want to ask them what measures that they are taking to eliminate leakage and calcification etc.

EQUIPMENT INSTALLATIONWhile the grout is curing, the builder may then connect the pool equipment in preparation for filling the pool and testing.

FINISHING TOUCHESBefore the pool can be filled, the final touches will be completed. Finishing touches may include inlet and outlets fittings and to the tiling or light fittings etc.

EQUIPMENT TESTINGOnce the pool is now ready to be filled with water and all equipment tested, connected and settings adjusted.

BALANCINGOnce all of the equipment has been tested the builder will introduce chemicals and adjust settings to the equipment to automate the system. NOTE: Additional adjustment may be required once chemical balance has settled

HAND OVERWhile the grout is curing, the builder may then connect the pool equipment in preparation for filling the pool, testing and handing over.

TILINGThe finishing touches are going to start once render and waterproofing (if required) have cured. The tiler will mark out lines, section at a time and then will begin to lay the tiles. Usually the tiler will leave the corners until last, but this will depend on the shape of your pool. Once all the tiles have been adhered, there may be a curing time before the tiler can grout, this will depend on the weather conditions and products being used. After curing, the tiler will then grout the pool and again allow the grout to cure for a predetermined period of time. NOTE: Curing of tile adhesive and grouts can vary from 7-28 days before the pool can be filled with water otherwise the performance of the installation materials could be compromised

WHAT TO EXPECT DURING CONSTRUCTION OF A BASIC POOL

14

WEATHER CONDITIONS Weather conditions can adversely affect the construction schedule as there are many stages of construction that will require clear weather or at least no rain to complete. If you are experiencing poor weather conditions, expect your builder to delay construction. Remember that your builder is only protecting your investment by ensuring that conditions are optimal for construction.

PRODUCT LEAD TIMES As most finishing materials such as glass mosaics and stone pavers come from overseas, you may have to wait for materials to arrive if they are not in stock. Once you have selected your materials, ensure that they can be delivered in time for the builders schedule and then place the order and pay for your materials to ensure that your delivery will be made on time.

TREE REMOVAL If there are trees in the way of your construction, you will incur extra charges and will also require council approval before you can engage the services of an arborist to remove them.

DELIVERY COSTSDelivery costs will depending on the finishing materials selected for your pool and are not avoidable unless you are able to pick up the materials yourself.

TILER AVAILABILITYDuring the busy times of the year which can run September through to December, there are often shortages of experienced

pool tilers which can sometimes cause delays. During these times, it is very important that all of the finishing materials are onsite for when the tiler arrives as they are often booked in week in advance and may have to be re-booked to return.

SUB-CONTRACTOR AVAILABILITYAs with tiler availability during the busy season, the same can be said for the availability of sub-contractors they may be required to complete your project. Keep in mind that sometimes it is out of your builders hands if a sub-contractor causes some delay, the best course of action is to communicate with your builder about the construction schedule.

HITTING ROCK OR STRUCTURESometimes excavators find things underneath your yard such as rock, old buried septic tanks or hidden concrete slabs which can require heaver equipment to break up and remove. If this happens, the cost of excavation may become a lot more than initially anticipated.

RUBBISH REMOVALCheck with your builder that rubbish removal is covered within the quote at the very beginning as this is an area that is often debatable towards the end of a construction. Even when rubbish removal is covered, there may be extra disposal costs if you are to hit rock or other buried structure in your yard.

SITE ACCESSIf for any reason you have blocked site access and are either away or at work you may be stopping crucial contractors from entering to complete your work. Always ensure that you understand what access is required by what dates and keep these areas clear to avoid delays.

RESPONSIBILIT IESThe pool owner may be responsible for certain aspects of the construction such as DA approval, fencing, electrical work and certifications etc. If you have not organised these tradesmen or certifications in time for the next step in the process, you may be holding up your builders schedule and this could cause major delays if the builder has to reorganise multiple contractors during the busy season.

PAYMENTIt is important that you understand your payment schedule and stick to it. If you don’t pay your builder, they may stop work until you do. Your builder will have many bills and contractors to pay that are a result of building your pool, ensuring that your payment schedule is meet will ensure a smoother flow of work.

POSSIBLE DELAYS OR UNFORESEEN COSTS REGARDING CONSTRUCTIONTWO COMMON MISCONCEPTIONS ABOUT BUILDING A CONCRETE POOL ARE THAT YOU CAN BUILD FOR $30,000.00 AND THAT THE CONSTRUCTION WILL ONLY TAKE 3 WEEKS. UNFORTUNATELY, THIS IS NOT TRUE AND IF YOU ARE LOOKING FOR A QUALITY CONCRETE POOL YOU WILL HAVE TO PAY FOR THAT QUALITY AND BE PREPARED TO ALLOW THE TIME TO CREATE PERFECTION.

When constructing a pool, it should be noted that there may be extra cost associated that you may not have thought of, or circumstances that could cause delays. It is near impossible to predict every little hiccup that may occur when you are at the mercy of mother nature and third party contractors and it is important to understand that there may be some small delays or extra charges if certain circumstances arise. Your builder will always do their best to avoid such inconveniences however, it is important to understand that it may happen. Below are some examples of situations that may cause such problems.

ENSURE THAT YOU HAVE CLEAR COMMUNICATIONFor requirements or specifications in writing to your builder and that they are agreed upon and understood by both parties, this will ensure that no communications are lost in translation.

LISTEN TO YOUR BUILDER’S ADVICEAn experienced builder will be knowledgeable about every aspect of the construction including finishing materials such as stone and glass mosaics and if they have a preference for certain products it is because they know how they perform. Remember that no builder wants to return to a site for rectification that may have been caused by their customer overriding their advice on product selections.

CONFIRM YOUR SURFACING MATERIALSYour builder needs 8 weeks notice prior to the date that they will require them. This will assist in ensuring that the products will be in stock or are secured on an arriving container and that your products are supplied in an efficient timeline to your construction schedule. Most surfacing materials come from overseas and there can often be lead times.

BE AWARE THAT THERE WILL BE CURING TIMESBetween 7-28 days when building with concrete and adhesive products for various stages of the process. Curing is very important for concrete & adhesives and curing times should never be ignored.

RESEARCHEnsure that you have researched the suitability of the finishing products. Europe Imports are able to alleviate this issue as swimming pools are our specialty and all products that we supply are 100% suitable for submerged conditions.

UNDERSTAND YOUR PAYMENT SCHEDULEEnsure that you have your payments ready when they are due. This will ensure that your builder is able to pay his suppliers or staff and continue to proceed in an efficient manner.

BE PREPARED TO RECEIVE DELIVERIESWhen deliveries are scheduled you may need to clear a path and being home to accept goods or allowing access to storage areas etc.

START PLANNING YOUR CONSTRUCTIONAround March is an ideal time to start and plan to have it completed by October which is before the busy season, this way you will avoid some of the possible delays that arises due to the busy season.

NEVER CUT COSTSNever cut costs on finishing materials or installation materials. Using the correct products for your pool will ensure there are no heavy rectification costs in the near future..

CHECK YOUR PROPERTYCHECK FOR UNDERGROUND UTILITIES WITH YOUR LOCAL COUNCIL BEFORE APPROACHING BUILDERS TO ENSURE THAT YOU ARE ABLE TO BUILD AN IN GROUND SWIMMING POOL TO BEGIN WITH. For more information visit “Dial Before You Dig” at: www.1100.com.au.

READ AND UNDERSTAND YOUR CONTRACTSO THAT THERE ARE NO CONFUSIONS AS TO WHAT WORK WILL BE COMMENCED. THE MAJORITY OF ISSUES COULD HAVE BEEN SIMPLY RECTIFIED BY COMMUNICATING TO THE BUILDER ABOUT AREAS OF THE CONTRACT THAT ARE NOT CLEAR.

TIPS TO ENSURE A SMOOTH AND TROUBLE FREE CONSTRUCTION

15

EZARRIRANGE: NIEBLATILE: 2512-C, 25mm

16

DEVELOPMENT APPLICATIONS AND APPROVALSYOU WILL NOT BE ABLE TO COMMENCE WORK WITHOUT HAVING THE DEVELOPMENT APPLICATION SUBMITTED AND APPROVED BY YOUR LOCAL COUNCIL.

ASPECTS OF THE CONSTRUCTION THAT YOU MAY BE RESPONSIBLE FOR

TREE REMOVALIf there are trees in the way of your construction, you will require council approval before you can engage the services of an arborist to remove them.

ORDERING OF F INISHING MATERIALS AND ASSURING SUITABILITYIf you are looking after the selections and purchase of finishing materials, you will need to have suitable products delivered before the tiler is due to arrive.

FENCING INSTALLATION AND CERTIFICATIONYou will not be able to fill your pool without this being finished and certified.

RUBBISH REMOVAL AFTER CONSTRUCTIONFor safety reasons the rubbish should be removed as soon as the construction has been completed, ask your builder to let you know when this can be done if you are unsure and to know if further mess will be made.

ELECTRICAL CONNECTIONS AND CERTIFICATIONSNothing will be running without electrical connections and you builder will not start the systems without electrical certifications.

GAS CONNECTIONS AND CERTIFICATIONSIf you have organise gas heating, you will have to connect and certify the connection before you are able to run this equipment.

SEALING OF ALL NATURAL STONEAll natural stone should be sealed with the appropriate sealers and it is wise to do this as early as possible by an approved sealer applicator.

MAINTENANCE OF THE POOL AFTER HANDOVEROnce the handover has been made, you will have to read the equipment manual and understand how to maintain your pool. Your builder will give you a run down on how to maintain your pool however it is also a good idea to approach a local pool maintenance store and organise for them to check your pool from time to time.

THERE ARE CERTAIN ASPECTS THAT YOU AS THE POOL OWNER MAY BE RESPONSIBLE FOR AND IT IS WISE TO DISCUSS THESE POINTS WITH YOUR BUILDER SO THAT YOU UNDERSTAND WHAT IS INVOLVED. OFTEN THE POOL BUILDER WILL LOOK AFTER SOME OF THESE AREAS HOWEVER, IF THEY ARE NOT, YOU MAY HAVE TO ORGANISE CERTAIN TRADES OR CERTIFICATIONS IN LINE WITH THE PRODUCTION SCHEDULE.

THESE AREAS SHOULD BE ORGANISED AS EARLY AS POSSIBLE WHEN YOU ARE APPROACHING THE TIME THAT THEY ARE ABLE TO BE STARTED, AREAS SUCH AS THESE BELOW:

PERFECT PLANNING

EQUALS PERFECT RESULTS

EZARRIRANGE: NIEBLATILE: 2512-C, 25mm

17

EXEMPT DEVELOPMENTExempt Developments are minor developments which do not require any approval from Council. State Environmental Planning Policy (Exempt and Complying Development Codes) 2008.

COMPLYING DEVELOPMENTComplying Development is a combined Development Application and Construction Certificate which meets specific criteria. Complying developments must meet the requirements as outlined in State Environmental Planning Policy (Exempt and Complying Development Codes) 2008.

To obtain approval for a Complying Development, you are required to submit an application for Complying Development Certificate (CDC). A CDC may be obtained from Council or a Private Certifier.

If your proposal does not meet all of the Complying Development requirements applicable to your development, then a Development Application will need to be lodged and approved by Council before you can build.

Proposals that are not exempt or complying are required to go through the development process as outlined in this guide.

DO I NEED TO LODGE A DEVELOPMENT APPLICATION?Some examples of proposals requiring the submission of a Development Application are:

• Erecting a new swimming pool, retaining walls, etc.

• Addition or alteration to an existing swimming pool

• Carrying out of demolition works

• Carrying out earthworks, excavation or filling

Plans must contain all relevant information, so as to reasonably assist Council’s assessment of your proposal. Investing in this process will often produce a better design and clearer plans that contain all relevant information.

Should you require further information or assistance, contact SPASA on 1800 802 482 or visit www.planning.nsw.gov.au/housingcode.

DEVELOPMENT APPLICATION (DA) EXPLAINEDA DEVELOPMENT APPLICATION (OR DA) IS A FORMAL REQUEST FOR PERMISSION TO USE A PREMISES FOR A PARTICULAR PURPOSE, TO DEVELOP LAND, SUBDIVIDE LAND AND/OR CARRY OUT BUILDING WORKS.

A DA APPLICATION CONSISTS OF:• PLANS AND DRAWINGS OF THE PROPOSED DEVELOPMENT

• DOCUMENTATION SUCH AS STRUCTURAL DETAILS, BASIX CERTIFICATE (WHERE APPLICABLE), A STATEMENT OF ENVIRONMENTAL EFFECTS.

TO LODGE A DEVELOPMENT APPLICATION, FOLLOW THESE FIVE (5) STEPS:

1. ASK ABOUT COUNCIL CONTROLS AND POLICIES (THESE ARE AVAILABLE OVER THE COUNTER AND ON YOUR LOCAL COUNCIL’S WEBSITE)

2. PREPARE PLANS AND DRAWINGS

3. PREPARE A STATEMENT OF ENVIRONMENTAL EFFECTS

4. COMPLETE THE APPLICATION FORM AND ASSOCIATED CHECKLISTS

5. LODGE THE COMPLETED FORM, ACCOMPANIED BY PLANS, RELEVANT DOCUMENTATION AND FEES.

EZARRIRANGE: NIEBLATILE: 2560-A, 25mm

SITE ANALYSIS PLANThe plan should show existing site conditions in relation to surrounding land and buildings. The plan should be drawn to a standard 1:100, 1:200 or 1:500 scale and should include the following:

• Orientation: North point, (true north), Scale (ratio and scale bar) and date

• Property Details: Property boundaries and dimensions, lot and deposited (DP numbers), strata plan, site area (square metres or hectares), easements, rights of way, sewer mains.

• Access: Access to public roads etc.

• Existing Development: Existing structures on site and adjoining property, location, distances from boundary height, current use (front and rear entrances), overshadowing by adjoining premises, fence locations and height, street frontage features (trees, kerbs, footpaths and crossings).

PLANS AND ELEVATIONSThese drawings should clearly show the proposed pool structure. The submitted drawings should be drawn to scale. Plans:

• True North point (not magnetic north)

• Scale showing ratio

• Plan number, date and address of proposal

• Front, side and rear setbacks

• Existing building/s on premises

• Location of windows and internal layout

• Dimensions, areas and proposed use.

ELEVATION AND SECTIONS• Elevations should show each orientation of the proposal

• A section from at least one direction of proposal

• Plan number, date and address of proposal

• Finished ground levels

• Height of retaining walls and fences

• Extent and level of any excavation to be carried out on the site

BASIX CERTIFICATE?BASIX (the Building Sustainability Index), is a web-based planning tool that measures the potential performance of new residential dwellings against a range of sustainability indices: Energy, Water, Thermal Comfort, Storm water, and Landscape. By reducing the environmental impact of these features, NEW homes are more comfortable and cheaper to run than most existing homes.

BASIX Certificates are currently required for all new residential dwellings, residential flat buildings, townhouse development, dwelling additions over $50,000.00 and swimming pools which exceed 40,000 litres.

Compliance with these targets is demonstrated through the completion of a BASIX assessment and the issuing of a BASIX Certificate.

PREPARATION OF PLANS & DRAWINGSYOU WILL NEED TO PREPARE SEVERAL TYPES OF PLANS AND DRAWINGS, THE FOLLOWING IS A GENERAL GUIDE AS TO WHICH PLANS YOU MAY NEED TO PREPARE.

PLANS YOU MAY NEED• SITE ANALYSIS PLAN• SITE PLAN (REQUIRED FOR ALL APPLICATIONS)• PLANS AND ELEVATIONS (REQUIRED FOR ALL APPLICATIONS)• REDUCED PLAN (A4) (REQUIRED FOR ALL APPLICATIONS

REQUIRING NOTIFICATION)• SURVEY PLAN• LANDSCAPE PLAN• STORM WATER DISPOSAL (DRAINAGE) PLAN• SOIL & WATER MANAGEMENT PLAN

SCALE – THE SCALE MUST BE SHOWN ON EVERY PLAN.

LEVELS – PLANS AND ELEVATIONS SHOULD SHOW INFORMATION SUCH AS CONTOURS, GROUND LEVELS, FLOOR LEVELS, ROOF LEVEL, ETC.

NUMBER OF COPIES TO BE PROVIDED – GENERALLY 4 SETS OF PLANS ARE REQUIRED. BE SURE TO CHECK WITH YOUR LOCAL COUNCIL.

Should you require further information or assistance, contact SPASA on 1800 802 482 or visit www.planning.nsw.gov.au/housingcode.

18

19

From 1 February 2012, home warranty insurance is required to be obtained where the contract price is over $20,000 or, if the contract price is not known, the reasonable market cost of the labour and materials involved is over $20,000. Prior to 1 February 2012, the threshold was $12,000.

Where the contract price or the reasonable market cost of the labour and materials involved does not exceed $20,000, there is no legal requirement for home warranty insurance to be obtained.

Contractors who carry out residential building work must still hold an appropriate licence with Fair Trading where the labour and materials involved are valued at over $1,000.

Persons who contract and/or carry out specialist work (ie. electrical wiring, plumbing, gas-fitting, air-conditioning and refrigeration) require a licence regardless of the value of the work.

The builder’s name shown on the insurance certificate should be exactly the same as that on the building contract and the builder’s licence. Without home warranty insurance, you are not covered for defective or incomplete work should your builder sadly pass away, or he become insolvent or simply “leave the job”.

Policies issued after 19 May 2009 also cover you where your builder’s licence is suspended for failure to comply with a money order of a tribunal or court in your favour. Refer to the Home warranty insurance page on the Fair Trading website for more information.

It is recommended that prior to making any payment under your contract, you check the validity of the certificate of home warranty insurance by contacting the home warranty insurer whose contact details appear on the certificate. Refer to the Approved insurance agents and past approved insurer’s pages on the Fair Trading website for more information.

Other insurance may be required and it is also strongly recommended that you sight current contract works and public liability insurance policies covering your own and neighbours’ properties. For your own protection, check that all the people you engage to undertake any part of your building project have the necessary insurances in place and that the certificates are current.

Refer to the Insurance page on the Fair Trading website for more information.

GENERAL BUILDERS WARRANTY PERIODSStructural warranty = 6 years Finishing warranty = 2 years

Tip: Increase your finishing warranty with a product warranty that covers the glass mosaics, adhesives and grouts, from the glass mosaic and adhesive suppliers.

To obtain a full system warranty that the product suppliers will cover for up to 15 years, use glass mosaics that have been tested with the adhesive products that are being used. Quality product suppliers will offer system warranties that will cover the internal finish of your pool for much longer than the standard 3 years finishing warranty that your builder is required by law to supply.

Note: System warranties are only valid with an up to date written installations specification that has been written specifically for the supplier’s mosaics and may incur extra cost.

RELEVANT INFORMATION ABOUT HOME WARRANTY INSURANCE IN NSW

HOME WARRANTY INSURANCE NEEDS TO BE PROVIDED BY:• A builder or tradesperson before taking any money

(including a deposit) from a home owner (including an owner-builder) under a residential building contract and before starting any work under that contract

• A ‘spec’ builder before starting any residential building work on a property owned by the builder

• A developer before entering into a contract for the sale of a property on which a builder is doing or has done residential building work for the developer

• An owner-builder (i.e. a home owner who did owner-builder work under an owner-builder permit) before entering into a contract for sale of the property on which residential building work was done within the previous 6 years.

Swimming Pool & Spa Association (NSW & ACT)

Australian Stone Advisory Association

Australian Tile Council

Master Builders Association

Tiles & Tiling Industry Association Australia

While swimming pools allow us to get together with our friends and family to share fun, fitness and relaxation, they can also pose a risk. There are some easy to remember rules that need to be followed to ensure the safe use of swimming pools and spas at all times. SPASA recommends these safety guidelines be followed at all times:

• Supervise children at all times around water. If you need to leave the pool or water area, even for a moment, take the child with you.

• Make sure your pool or spa has compliant fencing and childproof locking. Always remember that a swimming pool fence is not a substitute for supervision.

• Don’t leave furniture or other items accessible that children can climb on near your pool or spa fence.

• Be aware that hair, bathing suit strings and tassels or body parts can become entangled in an improperly covered drain or suction point.

• Display a resuscitation chart on your pool fence and take a CPR course so you will know what to do in an emergency.

• Familiarise children with water by taking them to swimming lessons at the local pool.

• Make sure all pool users are warned against sitting on, or covering, a drain or suction point. This can cause injury, or in extreme cases, death.

SOURCE REFERRALS AND USEFUL CONTACTS

Europe Imports Pty Ltd www.europeimports.com.au

Swimming Pool and Spa Association (NSW & ACT) www.spasa.org.au

Australian Tile Council (ATC) www.australiantilecouncil.com.au

Australian Stone Advisory Association (ASAA) www.asaa.com.au

NSW Swimming Pool Register www.swimmingpoolregister.nsw.gov.au

BASIX www.basix.nsw.gov.au

NSW Health www.health.nsw.gov.au

Sydney Water www.sydneywater.com.au

Master Builders Association www.masterbuilders.com.au

Department of Fair Trading www.fairtrading.nsw.gov.au

Standards Australia (SAI Global) www.standards.org.au

Work Cover www.workcover.nsw.gov.au

Bureau of Meteorology (for rainfall & Evaporation etc) www.bom.gov.au/weather/nsw

NSW Swimming Association www.nswswimming.com.au

Royal Life Saving Society Australia www.royallifesaving.com.au

AUSTSWIM www.austswimnsw.com.au

ACT Planning & Land Authority www.actpla.act.gov.au

Dial Before You Dig www.1100.com.au

THE BACKYARD SWIMMING POOL IS AN AUSTRALIAN ICON THAT FOR MANY YEARS HAS PROVIDED GOOD TIMES AND HEALTHY RECREATION FOR PEOPLE OF ALL AGES.

SWIMMING POOL SAFETY

20

EZARRIRANGE: IRISTILE: AZUR 25mm

21

SPASA require contracts be presented in a clear and concise manner so as consumers cannot be misled. We recommend that members use SPASA contracts for Concrete Pools, Fibreglass Pools and Pool Renovations. The association also produces Preliminary Agreements, Variation booklets and Pool Handover Books. Please speak to your pool builder about utilising a SPASA contract.

SPASA (SWIMMING POOL & SPA ASSOCIATION OF NSW & ACT ) CONTRACT CHECKLIST

• The pool location on the property and the position of the filtration equipment must be clearly shown on a diagram and the contract price must allow for the supply and installation in these positions and for the supply and installation of all necessary pipework.

• Access for all necessary building works and machinery must form part of the contract price and therefore not to be deemed as an extra at a later time.

• A datum or fixed reference point must be nominated and the height of the pool to that datum point must be clearly shown.

• The cost of all “Prime Cost” items and site cost must be clearly shown on the contract before you sign. “Price on application” is not acceptable for such items as rock excavation, tip fee, special equipment, etc.

• The cost of overburden excavation and all above-ground formwork and structural requirements necessary to construct the pool in the nominated position, taking into account the height of the pool relative to its surroundings.

• If the walkway and coping is included in the contract price, the width must be nominated.

• The costs of plans and specifications and local government application fees (except for deposits and other charges).

• All applicable State and Federal taxes.

• The type and size of equipment appropriate for the excavation, including transporting to site, taking into account the access and working space.

• Suitable filtration, sanitation and heating equipment to do the job. Make sure you check the suitability of the equipment before you sign or you may find you are charged more lately for a “bigger size” or you haven’t got suitable performance out of the equipment provided. Check manufacturers’ recommendations.

• If cost of tipping is quoted, it must be included in the contract price.

• Full details of the type and size of filtration to be supplied, including any accessories (light, heater, chlorinator, etc.) should be provided.

• To prevent lengthy delays in obtaining approval from council, insist that your sales consultant submits plans to council within a reasonable time.

• The maximum deposit you are required to pay on signing a contract is 10% regardless of the value of the work.(Effective as of March 2015)

• Make sure the penalty costs (liquidated damages) for late completion are realistic…so your pool gets finished on time. (At least $50 per week for 10 weeks).

• Sanitisation. What will it cost to keep your pool suitable for swimming and healthy for your family? Your consultant should be able to provide the answer. If in doubt consult the manufacturer.

• Solar Heating. Are you getting enough “collector” to adequately heat your pool? A rule of thumb is that a collector area of 80 percent to 100 percent of the surface area of the pool is required. Insist that the amount of collector is mentioned in the contract. If in doubt consult the manufacturer.

• A cooling off period of 5 business days must be included in contracts exceeding $20,000.

• Information regarding statutory warranty must be included in the contract.

• A customer checklist must be included in the contract. It should be read and completed before signing the contract.

• If you are in any doubt about your contract, contact SPASA on (02) 9630 6300.

• While SPASA has no mandatory powers, it does have strict control over its Members. Before being admitted, an applicant must be able to prove to a Board of Directors that they maintain a high standard of work, stick to ethical business practice, and have experience in successfully completing contracts.

NEVER SIGN A CONTRACT WITHOUT FIRST HAVING YOUR SITE INSPECTED BY A POOL CONSULTANT. IF YOUR CONTRACT READS “SUBJECT TO SITE INSPECTION” SIGN NOTHING AND PAY NO MONEY. YOU COULD LOSE YOUR DEPOSIT AND MUCH MORE.

Useful information to assist consumers in fact Sheets are available at no cost which will provide consumers with advice on a wide range of topics such as pool chemical treatment, pool heating, pool safety etc. This information is available to download from the SPASA website www.spasa.org.au or by calling the Association for a FREE consumer pack, which includes the colour magazine “Pool & Spa Essentials”.

SPASA ALSO INSISTS THAT THE CONTRACT PRICE MUST INCLUDE AND/OR CLEARLY STATE THE FOLLOWING.

HOW TO AVOID COSTLY MISTAKES WHEN FULLY TILING YOUR POOL

22

JOINTPOINT ®

ABOUT EZARRI GLASS MOSAIC TILES

GLASS MOSAIC T ILES

The backing system that joins the tiles together on a sheet is as important a factor if not more important as the quality of the tile itself.

THE JOINTPOINT® SYSTEM ON THE EZARRI MOSAICS IS ONE OF THE MOST TRUSTED AND SAFEST BACKING SYSTEMS ON THE MARKET TODAY. EZARRI IS THE MOST CHOSEN MOSAIC

TILE FOR A FULLY TILED OR WATERLINE TILED POOLS AS IT IS GUARANTEED QUALITY.

IMPORTANT: Be very wary of cheap imitations with similar backing systems that have emerged. If your purchased tile is not called Ezarri and in an

Ezarri box, then it is not an original Ezarri mosaic and will not be guaranteed.

WARNING

SECTION

HOW TO AVOID COSTLY MISTAKES WHEN FULLY TILING YOUR POOL

2

EZARRIRANGE: VULCANOTILE: STROMBOLI 25mm

EZARRI IS FULLY AWARE OF THE IMPORTANCE OF ENVIRONMENTAL CARE AND SUSTAINABLE DEVELOPMENT.100% of the glass we use as raw material is recycled. Ezarri hold the ISO 14021 Product Environmental Certification, which guarantees that Ezarri has implemented a control system to ensure that: 100% of the glass used is recycled and that 96% of Ezarri mosaic is made from recycled glass raw materials, with the remaining 4% from colouring and JointPoint®.

Ezarri also hold the EPD Environmental Certificate issued by the Swedish company Environdec. Ezarri certify what is known as the life cycle analysis of the project, in other words, the kilos of CO2 Ezarri produces to manufacture 1m2 of product, from the moment the raw material enters until the finished product leaves our warehouse.

Ezarri also hold the ISO 14001 Environmental Management Certification, which recognises the maturity and efficiency of our environmental management system.

Ezarri is also an associate company of the Green Building Council.

STEPS TO SUCCESSFUL POOL TILING3Whether you are the home owner, pool builder or tiler, a mistake in the finishing of a swimming pool

can result in repair costs that far outweigh the initial cost of quality products and systems. Following 3 basic steps ensures that your project is covered by suppliers as well as the builders.

Experienced craftsman + Specified adhesive systems + Ezarri Tiles quality mosaics = Success!

STEP 1 – CHOOSE EXPERIENCE (AUSTRALIAN ISSUED LICENCED)Choose a licensed pool builder who employs licensed tilers who have experience in swimming pool applications.

Ask to see their portfolio of work in previous pools, if you feel unsure, then ask them to guarantee their workmanship as it is a good sign of their reputation and integrity.

STEP 2 – CHOOSE COMPLETE SYSTEMSEnsure that the adhesive, grout and mosaic systems are specified tested systems that are designed to be used in submerged conditions.

Europe Imports heavily promote the use of tested and complete tiling systems. All adhesive companies design each of their products to be used only in conjunction with products from the same manufacturers. Combining products from different manufacturers can result in failure and will void any guarantee from the companies.

STEP 3 – CHOOSE EZARRI GLASS MOSAIC TILESEzarri Tiles are of the highest quality. The small and consistant JointPoint® backing system allows 92% glue adhesion without compromising grout coverage and performance, giving you the confidence that your tiles are there to stay.

At Europe Imports we guarantee our tiles and offer you a “Certificate of Quality and Authenticity” with every order and personally signed by the Director.

23

We are confident that you will be completely satisfied with their unique beauty and their high quality. “Ezarri” the company was founded in 1979 and

is one of the largest glass mosaic manufacturers today and exports to 80 countries worldwide. With state of the art machinery and carrying the BVQi

certificate of management, Ezarri boasts the highest technology along with the most energy efficient methods of production, thus assisting the world’s

determination to have an ecologically friendly planet.

This document you have received is your guarantee of quality of Ezarri Glass Mosaic Tiles. It is also a guarantee that you have received an

authentic Ezarri product and not an inferior substitute. Ezarri tiles are highly suitable for use in Pools, Spas, Kitchens, Bathrooms, Murals, Wellness

areas and walls both indoor and outdoor, for both domestic and commercial. They are produced from the highest quality 100% recycled pure glass

with the finest colour pigments selected. Ezarri tiles are non-porous and are guaranteed against colour fade.

The proven JointPoint® backing system of the tile was pioneered by Ezarri and complies with the very strict European and Australian Standards

AS3958.1.2007, giving you confidence, and ensures that you have maximum glue coverage for adhesion. It is the safest backing system on the market

today. This guarantee does not cover the tiling nor the maintenance of the finished product. It is therefore essential to choose a qualified and licensed

tiler who uses the precise glue and grout for the project, who follows the manufactures’ instructions for the project and guarantees his workmanship.

For pools, it is also essential that you maintain the correct chemical balance to ensure longevity. Please keep this certificate for your reference.

Europe Imports strongly advises the use of complete adhesive tiling systems intended for the application. For further advice on installation please

call the adhesive company.

Invoice #:Date: On behalf of Ezarri Spain

Director of Europe Imports

GLASS MOSAIC T ILES

austral ia

setting the industry standards

Certificate of Guarantee & Authenticity

Thank you for having chosen Ezarri glass mosaic tiles for your unique project.

Phone: 1300 EZARRI (392-774)

founded

2004

AWARDWINNING

TILES

AWARDWINNINGCOMPANY

2424

WE ALL HAVE A RESPONSIBILITYSupplier responsibilitiesAs suppliers, it is our responsibility to ensure that we are supplying the tiler and admirer with a product that is fit for the purpose, produced to the highest quality standard and passes Australian standards. Ezarri S.A. is an ISO 9001 certified manufacturer which basically means that we have systems in place that ensure the end product is consistently produced to a high quality standard. Another responsibility that we have as suppliers, is to ensure that our tiles have been successfully tested with adhesive manufacturers to ensure compatibility and suitability for the intended application.

Installers responsibilitiesAs for the installer, it is their responsibility to ensure that all stages of installation are carried out correctly, and, in accordance with the product installation specifications and Australian standards. It is also the responsibility of the installer to consider the possible effects that the surrounding environment may have on the installation. Substrate conditions, weather, temperature and humidity can all effect the performance of glues and grouts and will be taken into consideration by any quality installer.

Consumers responsibilitiesAs a consumer and admirer, your only responsibility will be choosing a supplier of quality products, along with an installer of experience and knowledge.

HIGH MOISTURE AREAS ARE THE HARSHEST CONDITIONSEnvironmental ConsiderationsThe most common areas that tile failures can occur are inside swimming pools, spa baths and steam rooms. High levels of exposure to water, complete submersion, expansion and contraction from freeze thaw, temperature fluctuation, adverse weather conditions or high levels of chemical exposure, are some of the common reasons behind failures in each of these areas. Even without environmental considerations, tiling in the above areas can be troublesome at the best of times, each party involved in any project, whether supplier, installers or consumer, each have a certain level of responsibility to ensure that the project is finished to a standard that will withstand the test of time.

EZARRIRANGE: NIEBLATILE: 2510-A, 25mm

EZARRIRANGE: NIEBLA

TILE: 2560-A, 25mm

ENVIRONMENTAL

CHOOSE EZARRI GLASS MOSIACS FOR QUALITY GUARANTEE AND EXTERNAL BEAUTY

JointPoint® is the builders preferred system because it lasts a lifetime, it is easy to work with ensuring a beautiful finish and they can rely on the fact that they will not have to return to a job to correct a tile failure. JointPoint® offers a consistent 92% adhesion area because the Joint adhesive is specially developed to be inert.

This means that the JointPoint® backing system will not be affected by heat, moisture or chemicals found in swimming pools. The special development of the JointPoint® system enables Ezarri to produce a consistently high quality product whilst enabling installers to obtain a perfect finish that will last a lifetime on any project.

BEFORETiles falling off within 5 years

25

EZARRI JOINTPOINT® METHOD

GLASS MOSAIC T ILES

AFTERRetiled with

Ezarri JointPoint®

LIFETIME GUARANTEE

JOINTPOINT® SYSTEM→

OTHER BRAND USED HERE

EZARRIRANGE: NIEBLATILE: 2502-A, 25mm

“A POOL RECTIFICATION”

1. CORD/STRIP METHODHere you can see that the backing method used is covering the back side of the tile which is reducing the adhesion area to below the minimum 90% required for submerged conditions as stated by the Australian standards for swimming pools. This system can also be affected by heat from the sun once laid around the pool ready for tiling. Once heated, this system can be difficult to handle as the sheet can sag and distort affecting the alignment of the mosaics.

2. DOT MOUNT METHOD (NOT ALL ARE THE SAME)Here you can see that the backing method used looks similar to Ezarri except for the size of the joints. This ‘Dot mount’ is often described by suppliers as being exactly the same as the Ezarri JointPoint® system however, this system often uses a material for the joint which is affected by moisture or heat which can cause difficulties in production which results in inconsistent dot width and height. This system often doesn’t meet the minimum 90% required for submerged conditions as stated by the Australian standards for swimming pools.

3. POLYURETHANE CORD/STRIP METHODAgain you can see that this system doesn’t meet the minimum 90% required for submerged conditions as stated by the Australian standards for swimming pools. Cord systems can be difficult to use during the hotter months which can affect the quality of the finish and alignment of the tiles.

4. MESH MOUNTING METHODMesh mounted mosaics can fail due to the adhesive used to mount the mesh onto the tile, essentially the mesh is adhered to the adhesive (not the tile) which can eventually fail over time due to the mesh glue deteriorating.

EXAMPLE 2Here the missing mosaic tile has left a neat impression confirming that it was pressed firmly against the adhesive layer but did not achieve a bond. Parts of the dried film of backing-mesh glue remain on the surface where they prevented contact between the tile and adhesive.

EXAMPLE 1This picture of the rear of the sheet shows how cheap mosaics often come out of the box with a dirty oily residue that must be cleaned before the tiles can be laid. This is generally caused by poorly maintained production machinery and if this is not thoroughly cleaned, it will inhibit the adhesive from adhering to the tile which will cause the sheets to peel off.

26

OTHER BACKING METHODSDISTORTED

CORDSTRIP

KNOWLWDGE IS POWER

CROSS SECTION VIEWThe comparison of the dot between the two samples shows that the dots on the imitation sample in Image 4 are much larger in width and also height than that of the Ezarri sample in Image 3. The Ezarri sample has smaller dots which allows for sufficient grout coverage.

OVERHEAD VIEWThe Ezarri sample in Image 5 shows that the spaces between the mosaics are slightly wider than that of the imitation sample in Image 6. The Ezarri sample offers more space for the grout when compared to the imitation sample.

AFTER THE EXAMINATION OF THE GLASS MOSAICS OBTAINED FROM A BONDI JUNCTION PROJECT, THE FOLLOWING PHYSICAL DIFFERENCES WERE NOTED WHEN COMPARED TO AN EZARRI SAMPLE.

Image 2. Ezarri JointPoint® is

consistent

Image 3. Ezarri Joint Point® is consistent Image 4. Imitation with inconsistent dot heights

Image 5. Ezarri Joint Point® has ample spacing

Image 6. Imitation with minimal spacing

Image 1. Imitation with

inconsistent backing

JOINT CONSISTENCYThe sample of the imitation mosaic in Image 1 has an inconsistent dot mount backing compared to the Ezarri sample in Image 2.

In one area of the imitation sample, the dot is missing and in other areas, the dot is much larger than that of the Ezarri samples.

THE EZARRI SAMPLES OFFER

AVAILABLE ADHESIONAREA92%

✔

✔

✘

✘

✘27

TECHNICAL OPINIONPHYSICAL APPEARANCE OF PROJECT SAMPLES

✔

THE BELOW CASE STUDY SHOWS HOW POORLY PRODUCED MOSAIC TILES, AND OR, ILL CHOSEN TILING SYSTEMS CAN CONTRIBUTE TO FAILURES IN SUBMERSED CONDITIONS. THIS PARTICULAR CASE PRESENTED WITH THE LARGE AREAS OF EXPOSED DOT MOUNT BACKING. AFTER EXAMINATION OF THE GLASS MOSAICS AND THE CHOSEN GROUT PRODUCTS, IT WAS REVEALED THAT THE LARGE IRREGULAR SIZED DOTS HOLDING THE SHEETS TOGETHER DID NOT ALLOW FOR SUFFICIENT GROUT COVERAGE, WHICH RESULTED IN A VISIBLE FAILURE.

Cause: Large and irregular sized dot mounting can result in poor grout coverage, some expansion and contraction seem to have caused the grout to pop off. It is possible, that a combination of large dot mounts and grout containing fine sand has resulted in weak points deteriorating over the backing.

Imitation Mosaic “Dot-mounted”

Tile: Imitation of Ezarri

Origin: ?

Project: Swimming pool

Location: Bondi Junction

Backing: Inconsistent “Dot Mount”.

Repair Cost: $5,000+

Failure: Dot Protrusion & Grout popping

“JointPoint®” has sufficient grout allowance throughout all products and

sheets.

Imitations may not allow for sufficient grout coverage due to irregular dot

sizes.

Ezarri JointPoint®

Excellent Grout Coverage Insufficient Grout Coverage✔ ✘

28

CASE STUDY

DOT PROTRUSIONCAUSED BYSWELLING

2829

If your tiles are not delivered in a box that clearly displays the brand name Ezarri and accompanied by a certificate of guarantee and authenticity, then they are NOT THE REAL DEAL and may be a poorly produced imitation.

Some businesses may lead you to believe that the product you are purchasing is an Ezarri product OR that they look the exact same – THIS IS NOT TRUE! If you find that you have been misled, please report it to Europe Imports on 1300 EUROPE (387-673). We appreciate your protection of our brand EZARRI.

OVER THE PAST FEW YEARS THERE HAS BEEN SOME CONFUSION IN THE INDUSTRY ABOUT WHICH BRANDS ARE PRODUCED AND BOXED AT THE EZARRI FACTORY IN LAZKAO. EUROPE IMPORTS WOULD LIKE TO CLEAR THE AIR AND ASSURE AUSTRALIA THAT THERE IS ONLY ONE BRAND MANUFACTURED BY EZARRI AND THAT BRAND IS EZARRI. THERE WILL NEVER BE ANY OTHER BRAND NAME OTHER THAN EZARRI ON AUTHENTIC EZARRI BOXES.

NOTE:

Pool box

Deco box

THERE IS ONLY ONE EZARRI MOSAICDO NOT BE CONFUSED

EZARRI TILES ARE MANUFATURED AND PACKED TOTALLY IN SPAIN

RESEARCH & DEVELOPMENTContinual research and development into application is the reason why Ezarri have been setting the industry standards for over 30 years. Ezarri are committed to the quality production of glass mosaic tiles that are suitable for the harshest areas of applications. When you purchase the Ezarri brand, you are not just purchasing a quality glass mosaic tile, you are purchasing a quality product that is second to none, aesthetic perfection and peace of mind for your project.

THERE IS A DIFFERENCEThere are many companies that are supplying a variety of panelling systems including dot mount, polyurethane chord, polymer glue chord, paper face, plastic face and mesh mounted mosaic tiles. Unlike other sheeting systems, the Ezarri JointPoint® system is completely controlled in production and allows for 92% available adhesion area contact area without the need for paper or plastic face.

BE ARMEDBeing armed with the information to make safe decisions is the key to ensuring a trouble free installation,

Europe Imports fully supports the tiling industry and promotes the use of suitable products, installation specifications and correct installation methods.

The JointPoint® system surpasses the adhesive contact requirements from Australian standard AS 3958.1-2007 for:

Ensure that when you are considering a tile for any application, that the Australian standards and installation methods are considered. The Ezarri JointPoint® system is suitable for almost every application and with the support of specifications for installation from major adhesive companies from across Australia, Ezarri is the obvious choice.

Internal residential walls (65%)Residential floors (80%)Commercial and industrial walls (80%)Commercial and industrial floors (90%)Wet areas (90%)Swimming pools (90%)External walls (90%)External floors, decks and roofs (90%)

EZARRI ARE PROUD TO SUPPLY THE TILING INDUSTRY WITH THE MOST DESIRABLE POOL FINISH AVAILABLE, BEAUTIFUL GLASS MOSAIC TILES. THE QUALITY OF THE EZARRI GLASS MOSAICS AND THE DESIGN OF THE

CERTIFIED JOINTPOINT® SYSTEM, ASSIST IN ELIMINATING POOL TILING ISSUES SUCH AS DELAMINATING TILES, SHARP CORNERS AND GROUT EROSION BY PROVIDING A CONSISTENT, QUALITY CONTROLLED SYSTEM THAT

IS DESIGNED FOR USE IN ALL AREAS OF APPLICATION, INCLUDING SUBMERGED CONDITIONS.

JOINTPOINT® SYSTEM – THE SAFEST SYSTEM

ABOUT EZARRI GLASS MOSAIC TILES

30

EZARRIRANGE: METALLICATILE: ESMERALDA 25mm

ENDORSEMENT 4Adhesion is one of the most critical in Tiling performance. The patented and Innovative JointPoint® System developed by Ezarri, combined with Dribond Construction Chemicals’ specified adhesive provides the maximum percentage of adhesive coverage.

This provides Peace of mind for the Merchant, Contractor, Tiler and Customer, who chooses this system. Construction Chemicals will provide, written project specifications, tailored to the individual requirements of each project .

These Specifications ensure quality system compatibility, ensuring the best outcomes for all parties.

ENDORSEMENT 6ParexGroup builds partnerships with quality manufacturers and wholesalers within the ceramic tiling and building industries. In the development of these partnerships, it is our belief that quality and performance should never be compromised. Therefore expect our partners to share and endorse these same beliefs. ParexGroup promotes a complete systems approach to the market and provides individual site specific specifications when required to complement and back up our fully guaranteed products. ParexGroup have systems that complement the Ezarri Mosaics range and together provide a finish of excellence.

Robert Luc NSW Sales Manager

ENDORSEMENT 5LATICRETE have been successfully specifying pool installation systems for more than 50 years. We have the runs on the board and know the right tile is an important ingredient in this equation. We are delighted to partner with a company like Ezarri who also share many of the same values as LATICRETE in being the best in its field.

Fred Gray Technical Service Manager

ENDORSEMENT 2Successful tiling is not just about high quality tile adhesive. Quality tiles and good workmanship are key to a worry free installation. This is especially true for demanding installations such as pool tiling. Bostik welcomes Ezarri’s focus on quality and workmanship as it helps ensure the tiling lasts for the lifetime of the structure.

Gary Schwarz Product Manager – ASA

ENDORSEMENT 3CTA Australia has the adhesive for every tiling application. When it comes to tiling Swimming Pools it is important to use quality tiles that are fit for purpose and quality adhesives and grouts. That’s why CTA and Ezarri have worked together to provide possible solutions for a quality installation.

Charlie Graham CTA Sales Manager

ENDORSEMENT 1Ardex Aust advocate a complete system selling approach to Tiling installation titled SYSTEM ARDEX, which combines high quality, totally compatible products, matched to unparalleled technical and field support.Ardex Australia endorse the Ezarri Mosaic range of Mosaic tiles. We consider the product to be of the highest standard, reflecting superior quality and performance as evidenced with the patented JointPoint® technology.In combination together, we believe this to be the best possible solution available in the Australian market for all mosaic applications.

31

FEATURING EZARRI GLASS MOSIAC TILESINSPIRATIONS...

EZARRIRANGE: IRIS TILE: JADE 25mm

EZARRIRANGE: IRIS MIXTILE: DIAMOND 25mm

EZARRIRANGE: METALLICATILE: LAVA 25mm

EZARRIRANGE: IRISTILE: EBANO 25mm

32

33

EZARRIRANGE: IRIS MIXTILE: ARCTIC LIGHT 25mm

EZARRIRANGE: VULCANOTILE: STROMBOLI 25mm

EZARRI RANGE: IRISTILE: OCEAN 25mm

EZARRIRANGE: NIEBLATILE: 2505-A, 25mm

EZARRIRANGE: IRISTILE: OCEAN 25mm

34

EZARRI RANGE: DECO MIXTILE: 2518-B, 25mm

EZARRI (Spa)RANGE: SPACETILE: CAPRICORN 25mm

EZARRIRANGE: IRISTILE: PERLA 25mm

EZARRI (Pool)RANGE: METALLICATILE: INOX 25mm

EZARRIRANGE: VULCANOTILE: TEIDE 25mm

35

2522-A

2576-B

Jade

2529-B

2596-B

2502-A

2545-A

2509-C

Arena

2503-D

2511-A

Azur

2504-A

2560-A

2516-B

Cobre

2505-A 2507-A

2562-B

2518-B

Perla

2508-A

Cuarzo

2521-B

Safe-Steps Anti-slip range

Ocean Zafiro

The Safe-Steps range is the perfect choice when a gentle

grip is required. Projects such as pool steps, floors

in bathrooms, showers or any area where safety is of a

concern or where water may be present. Safe-Steps are

very popular on pool steps for their safety for children.

Europe Imports have designed a mosaic range exclusively for Australia to add to our already stunning ranges designed by Ezarri in Spain. The Exclusive

Designer range is diverse in colour, tone and texture and

will compliment the many facets of design that are in

demand today.

Cocktail range

Deco Mixrange

Exclusive Australian

Designer range

Eclipse

Margarita

25006-D

25015-D

Gin Fizz

Mojito

25007-C

25016-D

Alexander

2514-B

Grasshopper

San Francisco

25008-D

Blue Moon

25001-C

Bellini

2518-B

Kir Royal

Tomahawk

25009-D

25011-D

Caipirinha

25002-C2576-B

Long Island

25010-D 25014-E

Cosmopolitan

25003-B

Bloody Mary

2577-C

ManhattanDaikiri

25004-B

Blue Lagoon

2578-B

25005-D

The glass mosaic Cocktail range has been designed

to combine the brilliant hues mixed with textures of various glass mosaic ranges.

The versatility of this range has the essence for perfect

fusion of colour and style, be it bold or subtle. Pools and décor projects come

alive with this tasteful range of pure elegance. Taste our

cocktails today!

The glass mosaic Deco Mix range has a beautiful combination of Niebla and Lisa

ranges that can bring a soft and subtle note or strikingly decadent feel to any project.

Suitable for pools, kitchens and bathrooms, the Deco Mix range

is an adventure in blends that offer a point of difference.

Aquamarine Atlantic

Tourmaline

Black RussianBali Dark Reef

Dry Martini Emerald Sapphire TopazTahiti

Arctic LightArctic Dark

Harbour

2528-C 2569-C

36

50 50

50 50

36 36 36 36 36

Other tile sizes available

36 50

All tile sheets shown are in 25mm x 25mm

All tile sheets shown are in 25mm x 25mm

All tile sheets shown are in 25mm x 25mm

All tile sheets shown are in 25mm x 25mm

POOL & DéCOR

White Russian

Other tile sizes available

36 50

Other tile colours in this range.

2514-B2585-B2586-B2523-B

Anti-slip DIN 51097Anti-slip DIN 51130Anti-slip (Pendulum) UNE-ENU 12633: 2003

Classification: C

Classification: R10

Class 3

36www.europeimports.com.au • Phone: 13001300 EUROPE (387-673)

Iris Mix range

Iris range

Lisa range

2541-A

2548-C

2556-C

2542-B

2549-A

2557-D

Ambar

2530-D

2543-D

2551-A

2558-B

Cuarzo

Nacar

Sky

2535-A

Arena

2531-B

2544-A

2552-A

2559-B

Ebano

Ocean

Moon

Stone

2536-C

Azur

2532-B

2545-A

2553-B

Green Pearl

Perla

Oasis

2537-E

Cobre

Diamond

2533-A

Jade

Zafiro

2538-D

2546-A

2554-C

Coral

2534-A

Marfil

Sahara

2539-B

2547-A

2555-C

The brilliant glass mosaic Lisa range offers bold and solid colours to emphasise

style and make a statement of solidity and controlled design.

The Lisa range is suitable for both pool and décor

situations.

The glass mosaic Iris Mix range has all the advantages of the

Iris pearl finish range with the addition of complimentary mixes

from the Niebla and Lisa ranges. You will find these combinations

will unlock endless ideas and bring them to reality for your

décor or pool projects.

The glass mosaic Iris range is a delicate yet daring design with a

pearl finish that creates a stunning effect throughout any project. The

shimmering effect and superb colours are very popular for pools

due to the movement of colour that reflects light and shade. Décor projects that require a

sophisticated and elegant style are perfect for this range.

Metallica range

Aurum Azurita Esmeralda

Opalo

Inox

Oxido

Lava Nickel

Rubi Vanadium

The reflective and edgy glassmosaic Metallica range will capture

your eye at every angle with thebold sophisticated metallic finish.

This range is especially appropriatefor intense designer styles and is

perfect for making a statement inevery project that will take your

imagination to new heights.

Simply go to www.europeimports.com.au/tilesand click on the MIXTURE GENERATOR LINK

CREATE YOUR OWN

Custom mix

36

36

36

36

3636

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

3650

50

50

50

5050 50

50

50

50

50

50

50

50

50

Other tile sizes available

36 50

Other tile sizes available

36 50

All tile sheets shown are in 25mm x 25mm

All tile sheets shown are in 25mm x 25mm

All tile sheets shown are in 25mm x 25mm

All tile sheets shown are in 25mm x 25mm

a touch of SpanishGlass

AWARDWINNING

AWARDWINNING

TILES

COMPANY

37

Niebla range

Vulcano range

Topping range

2511-A

2562-B

2523-B

2512-C

2564-B

2524-B

2501-B

Colima

Flowers

2513-A

2585-B

2506-C

2525-B

Masaya

Violet

Teide

Drops

Raisins

2502-A

Etna

Mochi

2516-B

2586-B

2507-A

2526-B

Mauna Loa

Almonds

Vesubio

Blue Berries

2503-D

Fuji

Silver Bits

2596-B

2508-A

Sajama

Leaves

Roses

2504-A

Iruzu

Cookies

Santorini

KiwiGrapes

2521-B

2597-B

2509-C

2529-B

2505-A

Kilauea

Choc Bits

Stromboli

Marigold Pecans

2510-A

2560-A

2522-B

Space range

SagittariusAquarius

Scorpio

Capricorn

Taurus

Leo

The universal glass mosaic Space range has a matt finish with

fine but dense pigments for a cosmos effect. Very popular with architects due to its uniqueness, and suitable for both pools and

décor situations that demand to be noticed. The Space range is

out of this world!

The glass mosaic Vulcano range features a rich pearl base colour which has been splashed with a

raised lava-like design resembling the flow of a volcano. This range

is extremely popular in décor and pool situations where a play with

design, texture and freedom in movement is certain to be noticed.

Topping range will add a touch of colour, personality, freshness and taste – just the right mix for your palette. Topping combines colour, digitally printed images

and patterns, creating small masterpieces for all tastes to

savour. 100% original Ezarri, with fresh, highly creative ingredients,

enriched with magical colours, unique motifs and textures.

The stunning glass mosaic Niebla range with its gentle

dappled effect offers movement of flowing colours, allowing tone and light variations to

your project. The popular pool and spa shades harmonize with

natural landscapes. The décor colours offer a selection from

light delicate shades to bold dark shades which will adapt to the

most diverse of projects.2520-A

CREATE YOUR OWN

Custom mixSimply go to www.europeimports.com.au/tilesand click on the MIXTURE GENERATOR LINK

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

36

3636

36

36

36

36

36

36

36

36

36

36

36

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

50

All tile sheets shown are in 25mm x 25mm

All tile sheets shown are in 25mm x 25mm

All tile sheets shown are in 25mm x 25mm

All tile sheets shown are in 25mm x 25mm

Other tile sizes available

36 50

POOL & DéCOR

38

a touch of SpanishGlass

Degrado range

Blues Rock Baja

Ondulato range

Anti-SlipCorners

Fosfo range

Wood

Stone

Lisa 2530-D

Ash Black Marble Bluestone Creamstone Dolerite

Rustic

Phyllite Riverstone Sandstone TigratoMakauba Sarsen

Carrara

Pale Cherry

Travertino

Lisa 2545-A

Gris Grey Verde Green

“Glow in the dark” Fosfo tiles make striking effects possible. Fosfo tiles can be used in

pools, kitchens, bathrooms, on walls or projects that require highlighting for either fun or safety.

Creating a statement, the Ondulato range has a decorative undulating surface to soften any space with elegance and character.

C O L L E C T I O N

The Zen Stone range draws its inspiration from the natural beauty of Stone and marble.

The Zen Wood range draws its inspiration from the warmth and natural beauty of a

selection of the world’s woods.

Now with Ezarri Curved 50mm Anti-Slip tile you will find you can lay the perfect step edge. The corners come in five different colours

Gradients of colour adorn the Degrado range satisfying

projects which require a visual difference and a smooth

transformation from dark to light tones and dramatic to

subtle effects.

Borders rangeOur classic Borders range

offer a dramatic yet classical statement, providing your

project with style and individuality.

Lisa 2545-A Back ground / Lisa 2543-D Design

Lisa 2543-D Back ground / Lisa 2545-A Design

www.europeimports.com.au • Phone: 1300 1300 EUROPE (387-673)

25mm x 25mm tile shown

25mm x 25mm tile shown

BEIGE BLUE GREY

NightNight NightDay Day Day

STANDARD

NightDay

Serpens

Fosfo Deco Mix range

Argo

Delphinus

Aquila

Draco

Lepus

2503-D

2505-A

2560-A

2545-A

2516-B

Randomly placed “glow in the dark” tiles allow this range to be an unexpected yet cool feature

in any project that is looking for that something unique with an

“after-dark” surprise!

All tile sheets shown are in 25mm x 25mm

Other border combinations of colours and styles are available.

GiftsASK US

ABOUT OUR

CONDITIONS APPLY

GYMTOWELS &

POOLTOWELS

Fior Di Bosco

Oak Palisandro

for

NEW

Corners also come in Fosfo

PDSTRAVERTINECOLOUR: PREMIUM LIGHT

EZARRIRANGE: IRISTILE: AZUR

EZARRI GLASS MOSAICSPREMIUM NATURAL STONE

PORCELAINOUTDOOR SHOWERS

STONE CLADDINGSKIMMER LIDS WITH STONE INLAYADHESIVES & GROUT SOLUTIONS

DRYTREAT SEALER & MORE

SUPPLYING

importers & suppiers

of Quality

Ezarri tiles

pds traverinethe perfect marriage

&

PRESENTS

YOUR

COMPLETE SOLUTIONS

FOR OUTDOOR & INDOOR PROJ

ECTS

GLASS MOSAIC T ILES

PORCELAIN

STONE

a preferred supplier

Email: sales@europeimports.com.auwww.europeimports.com.au

Phone: 1300 EUROPE (387-673)

pds

Waterproofing systemswedi

COMPLETE BUILDING SOLUTIONS