Cyclone Viewer Installation:

1. Right-click on the CycloneSetup91_x64.exe and “Run as administrator”.

2. Press “Next” to begin the installation process.

IMS Map360 Point Cloud runs on the powerful Cyclone platform. If you do not have a current licensed version of Cyclone installed on your computer you can download the free Cyclone Viewer program from this link below: Leica Cyclone 9.1.1 Installer https://lgshds.sharefile.com/d-sc2d2a4a5f9349598

The instructions for installing the free Viewer version of Cyclone are below. The entire process can take ½ hour or slightly more depending on your internet speed and your computer.

3. Select “Yes” if you agree with the licensing agreement.

4. Accept the destination default setting and press “ Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

9. Select “Install”.

10. Check shortcut locations and select “Next” .

11. Select “Finish”

12. Press “OK”.

13. Now select “Create New User Configuration Manager” and “Next”.

14. Press “Next” to install default folders.

15. Then select “Finish”.

16. Then “Close”.

17. Select “Finish” to complete the installation.

https://lgshds.sharefile.com/d-sc2d2a4a5f9349598

Cyclone Viewer Installation:

1. Right-click on the CycloneSetup91_x64.exe and “Run as administrator”.

2. Press “Next” to begin the installation process.

IMS Map360 Point Cloud runs on the powerful Cyclone platform. If you do not have a current licensed version of Cyclone installed on your computer you can download the free Cyclone Viewer program from this link below: Leica Cyclone 9.1.1 Installer

The instructions for installing the free Viewer version of Cyclone are below. The entire process can take ½ hour or slightly more depending on your internet speed and your computer.

3. Select “Yes” if you agree with the licensing agreement.

4. Accept the destination default setting and press “Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

9. Select “Install”.

10. Check shortcut locations and select “Next” .

11. Select “Finish”

12. Press “OK”.

13. Now select “Create New User Configuration Manager” and “Next”.

14. Press “Next” to install default folders.

15. Then select “Finish”.

16. Then “Close”.

17. Select “Finish” to complete the installation.

Cyclone Viewer Installation:

1. Right-click on the CycloneSetup91_x64.exe and “Run as administrator”.

2. Press “Next” to begin the installation process.

IMS Map360 Point Cloud runs on the powerful Cyclone platform. If you do not have a current licensed version of Cyclone installed on your computer you can download the free Cyclone Viewer program from this link below: Leica Cyclone 9.1.1 Installer

The instructions for installing the free Viewer version of Cyclone are below. The entire process can take ½ hour or slightly more depending on your internet speed and your computer.

3. Select “Yes” if you agree with the licensing agreement.

4. Accept the destination default setting and press “ Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

9. Select “Install”.

10. Check shortcut locations and select “Next” .

11. Select “Finish”

12. Press “OK”.

13. Now select “Create New User Configuration Manager” and “Next”.

14. Press “Next” to install default folders.

15. Then select “Finish”.

16. Then “Close”.

17. Select “Finish” to complete the installation.

Cyclone Viewer Installation:

1. Right-click on the CycloneSetup91_x64.exe and “Run as administrator”.

2. Press “Next” to begin the installation process.

IMS Map360 Point Cloud runs on the powerful Cyclone platform. If you do not have a current licensed version of Cyclone installed on your computer you can download the free Cyclone Viewer program from this link below: Leica Cyclone 9.1.1 Installer

The instructions for installing the free Viewer version of Cyclone are below. The entire process can take ½ hour or slightly more depending on your internet speed and your computer.

3. Select “Yes” if you agree with the licensing agreement.

4. Accept the destination default setting and press “ Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

7. Select “Next” to start copying the files.

8. Select “No license, operate in free viewer mode” and then select “Next”.

9. Select “Install”.

10. Check shortcut locations and select “Next” .

11. Select “Finish”

12. Press “OK”.

13. Now select “Create New User Configuration Manager” and “Next”.

14. Press “Next” to install default folders.

15. Then select “Finish”.

16. Then “Close”.

17. Select “Finish” to complete the installation.

Cyclone Viewer Installation:

1. Right-click on the CycloneSetup91_x64.exe and “Run as administrator”.

2. Press “Next” to begin the installation process.

IMS Map360 Point Cloud runs on the powerful Cyclone platform. If you do not have a current licensed version of Cyclone installed on your computer you can download the free Cyclone Viewer program from this link below: Leica Cyclone 9.1.1 Installer

The instructions for installing the free Viewer version of Cyclone are below. The entire process can take ½ hour or slightly more depending on your internet speed and your computer.

3. Select “Yes” if you agree with the licensing agreement.

4. Accept the destination default setting and press “ Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

9. Select “Install”.

10. Check shortcut locations and select “Next”.

11. Select “Finish”

12. Press “OK”.

13. Now select “Create New User Configuration Manager” and “Next”.

14. Press “Next” to install default folders.

15. Then select “Finish”.

16. Then “Close”.

17. Select “Finish” to complete the installation.

Cyclone Viewer Installation:

1. Right-click on the CycloneSetup91_x64.exe and “Run as administrator”.

2. Press “Next” to begin the installation process.

IMS Map360 Point Cloud runs on the powerful Cyclone platform. If you do not have a current licensed version of Cyclone installed on your computer you can download the free Cyclone Viewer program from this link below: Leica Cyclone 9.1.1 Installer

The instructions for installing the free Viewer version of Cyclone are below. The entire process can take ½ hour or slightly more depending on your internet speed and your computer.

3. Select “Yes” if you agree with the licensing agreement.

4. Accept the destination default setting and press “ Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

9. Select “Install”.

10. Check shortcut locations and select “Next” .

11. Select “Finish”.

12. Press “OK”.

13. Now select “Create New User Configuration Manager” and “Next”.

14. Press “Next” to install default folders.

15. Then select “Finish”.

16. Then “Close”.

17. Select “Finish” to complete the installation.

Cyclone Viewer Installation:

1. Right-click on the CycloneSetup91_x64.exe and “Run as administrator”.

2. Press “Next” to begin the installation process.

IMS Map360 Point Cloud runs on the powerful Cyclone platform. If you do not have a current licensed version of Cyclone installed on your computer you can download the free Cyclone Viewer program from this link below: Leica Cyclone 9.1.1 Installer

The instructions for installing the free Viewer version of Cyclone are below. The entire process can take ½ hour or slightly more depending on your internet speed and your computer.

3. Select “Yes” if you agree with the licensing agreement.

4. Accept the destination default setting and press “ Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

9. Select “Install”.

10. Check shortcut locations and select “Next” .

11. Select “Finish”

12. Press “OK”.

13. Now select “Create New User Configuration Manager” and “Next”.

14. Press “Next” to install default folders.

15. Then select “Finish”.

16. Then “Close”.

17. Select “Finish” to complete the installation.

Cyclone Viewer Installation:

1. Right-click on the CycloneSetup91_x64.exe and “Run as administrator”.

2. Press “Next” to begin the installation process.

IMS Map360 Point Cloud runs on the powerful Cyclone platform. If you do not have a current licensed version of Cyclone installed on your computer you can download the free Cyclone Viewer program from this link below: Leica Cyclone 9.1.1 Installer

The instructions for installing the free Viewer version of Cyclone are below. The entire process can take ½ hour or slightly more depending on your internet speed and your computer.

3. Select “Yes” if you agree with the licensing agreement.

4. Accept the destination default setting and press “ Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

9. Select “Install”.

10. Check shortcut locations and select “Next” .

11. Select “Finish”

12. Press “OK”.

13. Now select “Create New User Configuration Manager” and “Next”.

14. Press “Next” to install default folders.

15. Then select “Finish”.

16. Then “Close”.

17. Select “Finish” to complete the installation.

Cyclone Viewer Installation:

1. Right-click on the CycloneSetup91_x64.exe and “Run as administrator”.

2. Press “Next” to begin the installation process.

IMS Map360 Point Cloud runs on the powerful Cyclone platform. If you do not have a current licensed version of Cyclone installed on your computer you can download the free Cyclone Viewer program from this link below: Leica Cyclone 9.1.1 Installer

The instructions for installing the free Viewer version of Cyclone are below. The entire process can take ½ hour or slightly more depending on your internet speed and your computer.

3. Select “Yes” if you agree with the licensing agreement.

4. Accept the destination default setting and press “ Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

5. Select “Cyclone: VIEWER” and press “Next”.

6. Leave the Program Folder at default setting speci�ed below and select “Next”.

9. Select “Install”.

10. Check shortcut locations and select “Next” .

11. Select “Finish”

12. Press “OK”.

13. Now select “Create New User Configuration Manager” and “Next”.

14. Press “Next” to install default folders.

15. Then select “Finish”.

16. Then “Close”.

17. Select “Finish” to complete the installation.