Upload
davor-vidan
View
200
Download
15
Tags:
Embed Size (px)
DESCRIPTION
Implementation of International Maritime Solid Bulk Code.
Citation preview
IMSBCInternational Maritime Solid Bulk
Cargoes Code
2
General info to this course
All info only refers to solid bulk cargoes Unless specified differently:
Grain is not a part of the IMSBC Code (International Code for the Safe Carriage of Grain in
Bulk (International Grain Code), 1991) Text in slides is often shortened.
– For correct text, always refer to the IMSBC Code
3
Abbreviations
AoR Angle of Repose BC Code Bulk Code. Now obsolete BCSN Bulk Cargo Shipping Name IMSBC Replaces the BC Code ISPS Int. Ship & Port Facility Security Code MHB Matarial Hazardous only in Bulk TML Transportable Moisture Limit
4
IMSBC intro
Why? The code: Incidents, history, BC code Training: mandatory like IMDG Code chapter 1.3
Who? Master, deck officers, terminal staff, shore stuff,
surveyors, PSC.. Structure of the Code
5
History
Incidents => BC code (guidelines only) Voluntarily and not working too well
Resulted in IMSBC Code (updated version of the BC Code) MANDATORY FROM 1st January 2011!
Resolution MSC.268(85) - On 4 December 2008 Adopts the IMSBC Code text and SOLAS amendments
to Chapters VI and VII Deals with future amendments – every 2 years
6
SOLAS amendments, ch. VI Regulation 1-1 - Definitions For the purpose of this chapter, unless expressly provided otherwise, the
following definitions shall apply: 1 IMSBC Code means the International Maritime Solid Bulk Cargoes (IMSBC)
Code adopted by the Maritime Safety Committee of the Organization by resolution MSC.268(85), as may be amended by the Organization, provided that such amendments are adopted, brought into force and take effect in accordance with the provisions of article VIII of the present Convention concerning the amendment procedures applicable to the Annex other than chapter I.
2 Solid bulk cargo means any cargo, other than liquid or gas, consisting of a combination of particles, granules or any larger pieces of material generally uniform in composition, which is loaded directly into the cargo spaces of a ship without any intermediate form of containment.
Regulation 1-2 Requirements for the carriage of solid bulk cargoes other than grain
The carriage of solid bulk cargoes other than grain shall be in compliance with the relevant provisions of the IMSBC Code.
Regulation 7 (BLUE CODE…)
7
SOLAS amendments, ch. VII Regulation 7-5 (New) Requirements for the carriage of
dangerous goods in solid form in bulk The carriage of dangerous goods in solid form in
bulk shall be in compliance with the relevant provisions of the IMSBC Code, as defined in regulation VI/1-1.1.
8
by Resolution MSC.268(85) IMO adopted new regulations for the carriage of solid bulk cargoes, the IMSBC Code.
on a voluntary basis since 2009-01-01
mandatory for all ships carrying solid bulk cargoes, from 2011-01-01
9
IMSBC Amendments:
International Maritime Solid Bulk Cargoes Code and Supplement, 2012 Edition
incorporating Amendment 01-11 (Res.MSC.318(89) from 20.05.2011)
update to the original IMSBC Code 2009
Mandatory from 2013-01-01
10
IMSBC Code 2012 - What has changed?Changes in this edition include:
Fully updated individual schedules for solid bulk cargoes New individual schedules for such cargoes as distillers
dried grains with solubles, ferrous sulphate heptahydrate, fly ash wet, granular ferrous sulphate, magnesium sulphate fertilizers and general wood products
References to the most recent SOLAS amendments Updated information from the 2010 edition of the IMDG
Code
11
Future amendments
Every two years Amendments 02-13 to the IMSBC Code, draft only: Upcoming changes presently include:
to the code’s provisions on application and implementation Certificates of test Sampling procedures and complementary test procedures
for determining the possibility of liquefaction Revision of some existing schedules for cargo carriage and
development of new schedules for specific cargoes It is expected to be finalized in 2012, and the new
edition published in early 2013.
12
Interim Measures for Early Implementation of the Draft Amendments (02-13) to the IMSBC Code Expected to be Adopted at MSC 92 - MSC.1/Circ.1441 Due to tragic incidents with bulk cargoes, urges contracting governments and other relevant parties to implement the draft amendments on a
voluntary basis beforehand. the draft amendments to
Section 4 are aimed at the carriage of concentrates and other dry bulk cargoes which may liquefy: The certificates of test provided by the shipper are to be issued by an entity recognised by the
Competent Authority at the port of loading The Competent Authority at the port of loading is to approve and check the implementation of
the shipper’s procedures for ensuring that the moisture content of the cargo is less than the Transportable Moisture Limit (TML)
If the cargo is to be loaded from barges, the shipper’s procedures are to include measures to protect the material from precipitation and water ingress
The master is to be provided with a document issued by the Competent Authority confirming that it has approved the shipper’s procedures
The shipper is to allow the vessel’s nominated representative to inspect, sample and test the cargo stockpiles
Section 8, in an effort to overcome the common misconception that cargo samples which do not exhibit signs of free moisture or fluid conditions following a “can” test always means that the cargo is safe. The statement emphasises the possibility that the moisture content of the material may
still exceed the TML if the samples remain dry.
13
Environmentally Hazardous Cargoes (EHS) If transporting EHS , as defined by IMDG Code, in chapter 2.9,
which, if found by a range various of tests to be hazardous to the aquatic environment, have to be classified under the IMDG Class 9, UN 3077 or as having a Marine Pollutant as subsidiary risk.
In such a cases, provisions of Marpol Annex III and Annex V has to be complied with.
The relevant carriage requirements for bulk cargoes which are found to be EHS have not been specifically addressed in the IMSBC Code so the „Provisional classification of solid bulk cargoes under the revised MARPOL Annex V“ prescribed by MEPC.1/Circ.791, from 18 October 2012, has to be used.
14
Structure of the code 1/3
Foreword Section 1 - General provisions Section 2 - General loading, carriage and unloading precautions Section 3 - Safety of personnel and ship Section 4 - Assessment of acceptability of
consignments for safe shipment
15
Structure of the code 2/3
Section 5 - Trimming procedures Section 6 - Methods of determining the angle of
repose Section 7 - Cargoes that may liquefy Section 8 - Test procedures for cargoes that may
liquefy Section 9 - Materials possessing chemical hazards Section 10 - Carriage of solid wastes in bulk Section 11 - Security provisions
16
Structure of the code 3/3
Section 12 - Stowage factor conversion tables Section 13 - References to related information and
recommendations Appendix 1 - Individual schedules of solid bulk
cargoes Appendix 2 - laboratory test procedures, associated
apparatus and standards Appendix 3 - Properties of solid bulk cargoes Appendix 4 - Index
17
IMSBC Code – The goals
The primary aim of the IMSBC Code is to provide information on the dangers associated with certain types of solid bulk cargoes and to provide procedures to be followed when shipping solid bulk cargoes.
18
Foreword
Document of Compliance – S/74-II-19.4 or II-2/54.3 – Differences may be applicable due to the
year of build: Cargo ships of gross tonnage 500 or more, constructed
on or after 1 September 1984. Cargo ships of gross tonnage less than 500, constructed
on or after 1 February 1992. – A DoC does not cover Class 6.2 and 7
A seperate Code for Grain in Bulk – Grain Code 1991
19
Not everything in the IMSBC Code is mandatory Shall -> Mandatory Should -> Recommendatory May -> Optional 1.4.2. the following provisions of this Code
remain recommendatory or informative: Security provisions (except subsection 11.1.1); Stowage factor conversion tables; References to related info and recommendations; Appendices other than appendix 1 Individual
schedules of solid bulk cargoes; and part of the texts in in appendix 1.
20
General provisions
1.1 Introductory note 1.2 Cargoes listed in this Code 1.3 Cargoes NOT listed in this Code 1.4 Application and implementation 1.5 Exemptions and equivalent measures 1.6 Conventions 1.7 Definitions
21
General provisions
1.1 Introductory note It should be noted that other international and national
regulations exist and that those regulations may recognize all or part of the provisions of this Code.
In addition, port authorities and other bodies and organizations should recognize the Code and may use it as a basis for their storage and handling bye-laws within loading and discharge areas.
1.2 Cargoes listed in this Code Typical cargoes currently shipped in bulk, together with
advice on their properties and methods of handling, are given in the schedules for individual cargoes. However, these schedules are not exhaustive and the properties attributed to the cargoes are given only for guidance.
22
General provisions, 2
Consequently, before loading, it is essential to obtain current valid information from the shipper on the physical and chemical properties of the cargoes presented for shipment.
The shipper shall provide appropriate information about the cargo to be shipped (see section 4.2).
Where a solid bulk cargo is specifically listed in appendix 1 to this Code (individual schedules for solid bulk cargoes), it shall be transported in accordance with the provisions in its schedule in addition to the provisions in sections 1 to 10 and 11.1.1 of this Code.
The master shall consider to consult the authorities at the ports of loading and discharge, as necessary, concerning the requirements which may be in force and applicable for the carriage.
23
General provisions, 3
1.3 Cargoes NOT listed in this Code If a solid cargo which is not listed in appendix 1 to this Code is
proposed for carriage in bulk, the shipper shall, prior to loading, provide the competent authority of the port of loading with the characteristics and properties of the cargo in accordance with section 4 of this Code.
Based on the information received, the competent authority will assess the acceptability of the cargo for safe shipment.
1.3.1.1 When it is assessed that the solid bulk cargo proposed for carriage may present hazards as those defined by group A or B of this Code as defined in 1.7, advice is to be sought from the competent authorities of the port of unloading and of the flag State.
The three competent authorities will set the preliminary suitable conditions for the carriage of this cargo.
24
General provisions, 4
1.3.1.2 When it is assessed that the solid bulk cargo proposed for carriage presents no specific hazards for transportation, the carriage of this cargo shall be authorized. The competent authorities of the port of unloading and of the flag State shall be advised of that authorization.
1.3.2 The C.A. of the port of loading shall provide to the master a certificate stating the characteristics of the cargo and the required conditions for carriage and handling of this shipment. The C.A. of the port of loading shall also submit an application to IMO, within one year from the issue of the certificate, to incorporate this solid bulk cargo into appendix 1 of this Code.
The format of this application shall be as outlined in subsection 1.3.3.
25
General provisions, 5
1.4.3 In certain parts of this Code, a particular action is prescribed, but the responsibility for carrying out the action has not been specifically assigned to any particular person. It remains the exclusive right of each Government to assign
this responsibility 1.5.1 When a particular provision shall be complied with, a C.A.
may authorize any other provision by exemption if satisfied that such provision is at least as effective and safe as that required by this Code. Acceptance of an exemption authorized under this section by a C.A. not party to it, is subject to the discretion of that C.A.
Acceptance of an exemption authorized under this section by a C.A. not party to it, is subject to the discretion of that C.A. Accordingly, prior to any shipment covered by the exemption, the recipient of the exemption shall notify other competent authorities concerned
26
General provisions, 6
1.5.2 C.A.(s) which have taken the initiative with respect to the exemption: .1 shall send a copy of such exemption to IMO, which shall bring
it to the attention of the Contracting Parties to SOLAS; and .2 shall take action to amend this Code to include the provisions
covered by the exemption, as appropriate 1.5.3 The exemption shall be valid for max. 5 years. When the
IMSBC Code is not amended the exemption may be renewed. 1.5.4 A copy of the exemption or an electronic copy thereof shall
be maintained on bord each ship transporting solid bulk cargoes in accordance with the exemption, as appropriate.
27
General precautions
2.1 Cargo distribution The shipper must supply adequate information as
specified in section 4 Reference is made to ships stability booklet
and/or loading calculator Master shall be able to calculate stabillity Shifting is to be prevented by e.g. bulkheads Special care is to be taken with high density
(heavy) cargoes
28
General precautions, 2
2.2 Loading and unloading Cargo hold inspection & preparation before
loading Special attention to the bilges, bilgelines and
sound pipes Ventilation should not blow cargo dust into the
accomodation Dust can damage moving parts of machinery on
deck as well as navigational aids
29
Safety of personnel & ship
3.1 General requirements • Medical First Aid Guide
3.2 Poisoning, corrosive & asphyxiation hazards
3.3 Health hazards due to dust 3.4 Flammable atmosphere 3.5 Ventilation 3.6 Fumigation
30
Bulk cargo risks
Loss of stability loss or reduction of stability during a voyage
Breaking structural damage due to improper cargo distribution
Chemical reactions of cargoes Explosions Fires Loss of oxygen Intoxication
(Due vapours of the cargo or fumigants) Etc……
31
Assesment of acceptability
4.1 Indentification & classification 4.2 Provision of information 4.3 Certificates of test 4.4 Sampling procedures 4.5 Intervals between sampling & loading 4.6 Sampling procedures
• for concentrate stockpiles 4.7 Standarized sampling procedures
32
Transport Documents
4.8 Documentation DG stowage list (manifest) Stowage plan Emergency response plan (dealing with incidents involving the cargoes)
– Document of Compliance • For detailed information see 4.8.3. and SOLAS
4.1 Identification and classification 4.1.1 Each solid bulk cargo in this Code has been assigned a Bulk Cargo
Shipping Name (BCSN). When a solid bulk cargo is carried by sea it shall be identified in the transport documentation by the BCSN. The BCSN shall be supplemented with the United Nations (UN) number when the cargo is dangerous goods.
4.1.2 If waste cargoes are being transported for disposal, or for processing for disposal, the name of the cargoes shall be preceded by the word "WASTE".
4.2.1 The shipper shall provide the master or his representative with appropriate information on the cargo sufficiently in advance of loading to enable the precautions which may be necessary for proper stowage and safe carriage of the cargo to be put into effect.
4.2.2 Cargo information shall be confirmed in writing and by appropriate shipping documents prior to loading.
33
BCSN
Bulk Cargo Shipping Name and requireddata form
34
Trimming procedures
5.1 General provisions 5.2 Special provisions multi-deck ships 5.3 Special provions cohesive bulk cargoes 5.4 Special provions non-cohesive bulk
cargoes
35
AoR test Methods
6. Methods of determining the Angle of Repose 6.1 General
6.2 Recommended test methods6.2.1 Tilting box method6.2.2 Shipboard test method
Methods of determining the angle of repose An angle of repose of a non-cohesive solid bulk material shall be measured
by a method approved by the appropriate authority as required by section 4.1.4 of this Code
There are various methods in use to determine the angle of repose for non-cohesive solid bulk materials.
The recommended test methods are: 6.2.1 Tilting box method
– This laboratory test method is suitable for non-cohesive granular materials with a grain size not greater than 10 mm (subsection 2.1 of appendix 2). 6.2.2 Shipboard test method
– In the absence of a tilting box apparatus, an alternative procedure for determining the approximate angle of repose is given in subsection 2.2 of appendix 2
36
AoR Shipboard test method
To determine the angle of repose, a quantity of the material to be tested is poured very carefully out of a flask onto a sheet of rough-textured paper, in such a way that a symmetrical cone is formed The necessary equipment is - a horizontal table free from vibrations; sheet of rough-textured paper onto which the material should be poured; protractor; 3-litre conical flask.
Put the sheet of paper on the table. Split 10 litre of the material to be tested into three sub-samples and test each in the following way:
• Pour two thirds of the sub-sample (i.e., 2 litre) onto the sheet, producing a starting cone. The remainder of this sub-sample is then poured very carefully from a height of a few millimetres on top of the cone – Care should be taken that the cone will be built up symmetrically. This may be achieved by revolving the flask slowly close around the top of the cone when pouring When measuring, care should be taken that the protractor does not touch the cone; otherwise this may result in sliding of the material and spoil the test The angle has to be measured at four places around the cone, about 90 degrees apart. This test should be repeated on the other two sub-Samples
Calculations The angle of repose is taken as the mean of the 12 measurements and is reported to half a degree. This figure can be
converted to the tilting box value as follows: • At = As + 3° • At = angle of repose according to the tilting box test • As = angle of repose according to the survey test
37
Solid Bulk Cargo Groups:
Group A Cargo consist of the cargoes which may liquefy if shipped with moisture content in excess of their transportable moisture limit; shall only be accepted for loading when the actual moisture
content of the cargo is less than its TML; Group B Cargo consists of cargoes which possess a
chemical hazard which could give rise to a dangerous situation on a ship and harm persons or enviroment (MHB, IMDG, EHS)
Group C Cargo neither group A or B
38
Cargoes that may liquefy
7.1 Introduction 7.2 Condition of hazard 7.3 Provisions 7.3.1 General 7.3.2 Specially constructed or fitted ships
Test procedures 8.1 General 8.2 Measuring moisture content 8.3 Determining the TML 8.4 Liquefaction test for master
39
Chemical hazards
9.1 General 9.2 Classification 9.2.2 Class 4.1, 4.2, 4.3, 5.1, 6.1, 7, 8, 9 9.2.3 MHB 9.3 Stowage & segregation
40
Solid wastes
10.1 Preamble 10.2 Definitions
Dumping, incineration, other disposal 10.3 applicabillity 10.4 Transboundary movements (Basel convention) 10.5 Documentation
Waste movement document 10.6 Classification 10.7 Stowage & handling as schedule 1-9 & Group B
requirements 10.8 Segregation as 9.3.3 & 9.3.4 10.9 Accident procedures
41
11. Security
This is recommendatory only 11.1 Provisions company, ship and port 11.2 Provisions for shore-side personnel
Includes training requirements 11.3 High-consequence cargoes
42
Stowage factor, References
12. Stowage factor conversion A table to “translate” Cubic metres per metric tonn to cubic
feet per long ton And vice versa References:
SOLAS IMDG Code FSS Code MFAG Load line convention Basel convention MSC circulaires and resolutions
Safe use of pesticides Entering enclosed spaces
43
Individual schedules of solid bulk cargoes Appendix 1
244 pages varying from 1 (Alfalfa) upto 9 (Coal) pages per product Total almost 150 different products
44
Labratory test procedures
Appendix 2 1. Materials that may liquiefy
flow table test, penetration test, Proctor / Fagerberg test 2. Determining Angle of Repose 3. Standards used in test 4. Exothermic decomposition of fertilizers 5. Resistance to detonation 6. Self heating of charcoal Associated apparatus
45
Properties of solid bulk cargoes Appendix 3
1. Non-cohesive cargoes Prior to completion of loading, the angle of repose of the materials to
be loaded should be determined (6) so as to determine which provisions of this Code relating to trimming apply (5).
Non-cohesive cargoes shall be carried according to the provisions applicable to the stowage of grain cargoes.
AII cargoes other than those listed in this appendix are cohesive, and the use of the angle of repose is, therefore, not appropriate. Cargoes not listed should be treated as cohesive until otherwise shown.
2. Cargoes which may liquefy 3. Precautions for the cargoes which may possess a chemical
hazard
List and additional provisions, use of MFAG.
46
INDEX
APPENDIX 4 Lists
MATERIAL (Solid Bulk Shipping Names) GROUP (A, B, C) REFERENCES
47
Supplement
BLU Code Code of Practice for the Safe Loading and Unloading of Bulk Carriers BLU Manual
Manual on loading and unloading of solid bulk cargoes for terminal representatives Uniform method of measurement of the density of bulk cargoes
MSC/Circ. 908 (4 June 1999) Lists of solid bulk cargoes for which a fixed gas fire-extinguishing
system may be exempted or for which a fixed gas fire extinguishing system is ineffective MSC/Circ.1146 (75 December 2004)
Recommendations for entering enclosed spaces aboard ships Resolution A.864(20) (adopted on 27-11-1997) REVISED by
A 27/Res.1050 on 20 December 2011
48
Segregation 9.3.3 IMSBC
7.6.3.5 (IMDG) Segregation between bulk materials possessing chemical hazards and dangerous goods in packaged form: Unless otherwise required in this Code or in the IMSBC Code,
segregation between bulk materials possessing chemical hazards and dangerous goods in packaged form shall be in accordance with the following table
Numbers and symbols relate to the following terms, as defined in this chapter:
1 – “Away from” 2 – “Separated from” 3 – “Separated by a complete compartment or hold from” 4 – “Separated longitudinally by an intervening complete
compartment or hold from” X – The segregation, if any, is shown in the Dangerous Goods
List in this Code or the individual entries in the IMSBC Code .
49
Segregation 9.3.3 IMSBC, table
50
51
9.3.4 Segregation between solid bulk cargoes possessing chemical hazards
52
Numbers relate to the following segregation terms – 2: 2 "Separated from":
In different holds when stowed under deck. Provided an intervening deck is resistant to fire and liquid, a vertical separation, i.e. in different compartments, may be accepted as equivalent to this segregation.
53
Numbers relate to the following segregation terms – 3: 3 "Separated by a
complete compartment or hold from": Either a vertical or a
horizontal separation. If the decks are not resistant to fire and liquid, then only a longitudinal separation, i.e. by an intervening complete compartment, is acceptable.
54
Numbers relate to the following segregation terms – X: X
Segregation, if any, is shown in the individual schedules in this Code.
For 1 and 2: RED – referent material GRAY – incompatibile material
Deck resistant to liquid and fire Vertical lines represent transverse watertight
bulkheads between cargo spaces.
55
Thank you.
Questions?