1
For TCQ Use Only: IHW RE/ /CO/ /UPDATE Inactiate Your Solid Waste Registration Submit this form to inactivate your Solid Waste Registration (SWR). enerators that meet the qualifications below do not have a notification requirement and should inactivate their SWR. Facilities that close must also submit Waste Management Unit (WMU) closure information per Texas Administrative Code (TAC) §335.8. Requirements and guidance to close WMUs are at http://www.tceq.texas.gov/remediation/corrective_action/closure.html. Solid Waste Registration Number: EPA ID Number: Facility Name: Check here if the site above will not generate any reportable waste for the current reporting year. Checking this box substitutes for submittal of the Annual Waste Summary for the current year. Check here to inactivate generator activities on this registration. Check here to inactivate transporter activities on this registration. Check here to inactivate receiver activities on this registration. To inactivate your SWR as a generator, your facility must meet all the following qualifications: During the remainder of the current report year and future years, the facility will not generate more than: o 220 pounds of hazardous waste each month o 220 pounds of industrial Class 1 waste each month o 2,200 pounds of hazardous waste during the year o 2,200 pounds of industrial Class 1 waste during the year o 2.2 pounds of acutely hazardous waste during the year (Acute waste carries a P-listed EPA Waste Number.) o 220 pounds of contaminated soil, waste, or other debris resulting from the cleanup of acute hazardous waste spilled into or on land or water During the remainder of the current report year and future years, the facility will not store more than: o 2,200 pounds of hazardous waste o 2.2 pounds of acute hazardous waste o 220 pounds of contaminated soil, waste, or other debris resulting from the cleanup of acute hazardous waste spilled into or on land or water I certfy that the faclty wth the SWR number above meets all the qualfcatons lsted above, and that I wsh to nactvate the SWR. Printed Name of Facility Representative: Signature of Facility Representative: Date: Telephone Number: Mal or fax ths form to: Texas Commsson on Envronmental Qualty Regstraton and Reportng Secton, MC-129 P.O. Box 13087 Austn, Texas 78711-3087 Fax: 512-239-6410 If you have questions on how to fill out this form or about the Industrial and Hazardous Waste Registration Program, please contact us at 512-239-6413 or email [email protected]. Individuals are entitled to request and review their personal information that the agency gathers on its forms. They may also have any errors in their information corrected. To review such information, contact us at 512-239-3282. TCEQ form #20848 (Rev. 04/2019) For TCQ Use only: Log #

Inactivate Your Solid Waste Registration · Inactivate Your Solid Waste Registration Submit this form to inactivate your Solid Waste Registration (SWR). Generators that meet the qualifications

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Inactivate Your Solid Waste Registration · Inactivate Your Solid Waste Registration Submit this form to inactivate your Solid Waste Registration (SWR). Generators that meet the qualifications

For TC Q Use Only: IHW RE / /CO/ /UPDATE

Inacti ate Your Solid Waste Registration Submit this form to inactivate your Solid Waste Registration (SWR). enerators that meet the qualifications below do not have a notification requirement and should inactivate their SWR.

Facilities that close must also submit Waste Management Unit (WMU) closure information per Texas Administrative Code (TAC) §335.8. Requirements and guidance to close WMUs are at http://www.tceq.texas.gov/remediation/corrective_action/closure.html.

Solid Waste Registration Number: EPA ID Number:

Facility Name:

Check here if the site above will not generate any reportable waste for the current reporting year. Checking this box substitutes for submittal of the Annual Waste Summary for the current year.

Check here to inactivate generator activities on this registration.

Check here to inactivate transporter activities on this registration.

Check here to inactivate receiver activities on this registration.

To inactivate your SWR as a generator, your facility must meet all the following qualifications:

• During the remainder of the current report year and future years, the facility will not generate more than:

o 220 pounds of hazardous waste each month

o 220 pounds of industrial Class 1 waste each month

o 2,200 pounds of hazardous waste during the year

o 2,200 pounds of industrial Class 1 waste during the year

o 2.2 pounds of acutely hazardous waste during the year (Acute waste carries a P-listed EPA WasteNumber.)

o 220 pounds of contaminated soil, waste, or other debris resulting from the cleanup of acute hazardouswaste spilled into or on land or water

• During the remainder of the current report year and future years, the facility will not store more than:

o 2,200 pounds of hazardous waste

o 2.2 pounds of acute hazardous waste

o 220 pounds of contaminated soil, waste, or other debris resulting from the cleanup of acute hazardouswaste spilled into or on land or water

I cert fy that the fac l ty w th the SWR number above meets all the qual f cat ons l sted above, and that I w sh to nact vate the SWR.

Printed Name of Facility Representative:

Signature of Facility Representative: Date:

Telephone Number:

Ma l or fax th s form to: Texas Comm ss on on Env ronmental Qual ty Reg strat on and Report ng Sect on, MC-129 P.O. Box 13087 Aust n, Texas 78711-3087 Fax: 512-239-6410

If you have questions on how to fill out this form or about the Industrial and Hazardous Waste Registration Program, please contact us at 512-239-6413 or email [email protected].

Individuals are entitled to request and review their personal information that the agency gathers on its forms. They may also have any errors in their information corrected. To review such information, contact us at 512-239-3282.

TCEQ form #20848 (Rev. 04/2019) For TC Q Use only: Log #