INCANDESCENT 1850 Wilson Avenue, Toronto, … more information call 1-800-661-9610(canada) 1-888-762-5384(usa) incandescent lampholders candelabra base lampholders phenolic with outer

Etlin-Daniels reserves the right to discontinue, modify designs and change specifications without incurring obligation. While every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct,no warranty is given in respect thereof and the company shall not be liable for any error herein.Copyright 12/2001 Etlin-Daniels

INC

AN

DE

SC

EN

TLA

MP

HO

LDE

RS

I1

1850 Wilson Avenue, Toronto,Ontario, Canada, M9M 1A1

Ph: 416-741-7336 Fax: 416-741-9104

SECTION IINCANDESCENTLAMPHOLDERS

Candelabra Base LampholdersIS101, IS102, IS103 Candelabra Outer Threaded Lampholders I2IS104, IS104S, IS104F, IS05, IS104-PS Candelabra Single Leg Hickey Lampholders I3-I6IS105. IS106, IS107 Candelabra Euro Style Phenolic Lampholders I7NLS Candelabra Lampholders with Snap In Clips I8Intermediate Base LampholdersIS115, IS272 Phenolic Intermediate Lampholders I9Medium Base LampholdersIS201, IS211 Phenolic/Porcelain Keyless Lampholders I10-I18IS2209, IS2210 Porcelain Keyless Lampholders I19IS212, IS213, IS242, IS243, IS245 Phenolic/Porcelain Snap In Lampholders I20-I21IS241, IS241P, IS241F, IS240 Outer Threaded Lampholders I22-I23IS292, IS313, IS322, IS309, IS1501 Sign Receptacles, Cleat Angle Pan, Lampholders I24-I25IS509, IS510, IS511 Porcelain Side Outlet, Twin Keyless Lampholders I26ISP Series Phenolic and Metal Caps for Lampholders I27IS215, IS235 Phenolic Two and Three Light Cluster for Lampholders I28-I30IS270, IS270-1, IS276 Medium Base Adapters and Extensions I31IS271, Curio Light Medium Base Special lampholders for cabinetry and furniture I324KV Pulse Rated HID LampholdersIS267S, IS268, IS4221 Medium and Mogul Base Lampholders I34Medium Base Table Lamp SocketsIS216, IS218 Bottom Turn Lampholders I35IS219I, IS2301, IS25X Series Interior Mechanisms I36IS219M, IS230M, IS25X-M Series Metal Shell Lampholders I37IS219P, IS230P, IS25X-P Series Phenolic Shell Lampholders I38Miscellaneous Medium Base Lampholders and AdaptersIS26X Series Ceiling and Surface Porcelain and Phenolic Lampholders I39-140IS513, IS514, IS515 Weatherproof Mediem Base Lampholders I41IS278, IS279, IS280, IS281 Socket Reducer Adapter I42IS283, IS284, IS285, IS286 Socket Adapters and Current Taps/Lampholders I43

FOR MORE INFORMATION CALL1-800-661-9610 (Canada) 1-888-762-5384 (USA)

IncandescentLampholders CANDELABRA BASE LAMPHOLDERS

PHENOLIC WITH OUTER THREADED BODY

BRACKETNUMBER A B HOLE WIDTH

701 1-3/16" 5/8" 0.150"703 1-11/32" 1/2" 0.189"705 1-13/32" 5/8" 0.150"707 1-11/16" 5/8" 0.150"709 1-7/8" 1/2" 0.189" 0.342"

BRACKETNUMBER A

721 1-1/2"

Angle Brackets For IS103 Series

Snap Spring For IS103 Series

13/32(10.32)

1(25.4)

1/2(12.7)

1-7/32(30.96)

13/32(10.32)

23/32(18.26)

ACROSSFLATS

.722(18.34)

.728(18.49)

.805(20.45)

.815(20.7)DIA.

IS101 Threaded Body With Shoulder (End)IS102 Threaded Body With Shoulder (Feed Thru)IS103 Threaded Body Without Shoulder

• Outer threaded phenolic body with special locking features to prevent body halves from misaligning

• Molded skeleton type screw shell• Specify lead type, length and stripping

• Sockets can be supplied with various hickeys and brackets• Can be supplied with phenolic rings in Black, Brown, Brass

or Silver Plated, or Die Cast Brass or Silver• 75W, 125V• UL Listed & CSA Certified

E-12

D

EF

L

AxN=ANA

D

EF

L

AxN=ANA

To order harness sets of two or more sockets:• Specify the style and number of socket pieces• Centre-to-centre distance between sockets

(2" minimum) and free end length

• Wire type, colour and strip length• Style and colour of finishing nut

A

B

701

A

721

ANGLED BRACKETS

SNAP-IN CLIP

I2

Inca

ndes

cent


IncandescentLampholdersCANDELABRA BASE

PHENOLIC LAMPHOLDERS

Brackets For IS104, IS104S & IS104X Series

BRACKET DIMENSION DESCRIPTION OFNUMBER A MOUNTING HOLE

600 N 1-15/32" 1/8" IPS NIPPLE601 N 1-1/2" 1/8" IPS NIPPLE

601 1-1/2" 1/8" IPS TAP EXTRUSION603 N 1/5/8" 1/8" IPS NIPPLE

603 1/5/8" 1/8" IPS TAP EXTRUSION605 N 1-11/16" 1/8" IPS NIPPLE

605 1-11/16" 1/8" IPS TAP EXTRUSION607 N 1-3/4" 1/8" IPS NIPPLE

607 1-3/4" 1/8" IPS TAP EXTRUSION609 N 1-7/8" 1/8" IPS NIPPLE611 N 2" 1/8" IPS NIPPLE

611 2" 1/8" IPS TAP EXTRUSION613 2-11/16" 1/8" IPS TAP EXTRUSION615 2-1/4" 1/8" IPS TAP EXTRUSION

617 N 2-1/2" 1/8" IPS NIPPLE617 2-1/2" 1/8" IPS TAP EXTRUSION618 2-3/4" 1/8" IPS TAP EXTRUSION

619 N 2-7/8" 1/8" IPS NIPPLE619 2-7/8" 1/8" IPS TAP EXTRUSION

621 N 3" 1/8" IPS NIPPLE621 3" 1/8" IPS TAP EXTRUSION622 3-1/8" 1/8" IPS TAP EXTRUSION



627 N 4" 1/8" IPS NIPPLE627 4" 1/8" IPS TAP EXTRUSION

629 N 4-1/2" 1/8" IPS NIPPLE629 4-1/2" 1/8" IPS TAP EXTRUSION631 4-3/4" 1/8" IPS TAP EXTRUSION633 4-7/8" 1/8" IPS TAP EXTRUSION635 5" 1/8" IPS TAP EXTRUSION

635 N 5" 1/8" IPS NIPPLE638 6" 1/8" IPS TAP EXTRUSION640 8" 1/8" IPS TAP EXTRUSION

A

0.709"

0.66

9"

1-7/

32"

A

IS104 Series Skeleton Screw Shell, Straight BodyIS104-S Series Full Screw Shell, Straight BodyIS104-X Series Skeleton Screw Shell, Octagonal Flanged Body

• Standard is IS104 Series• Has skeleton type contacts in molded phenolic threaded body

riveted to bracket• 75W, 125V• Standard leads are 18 AWG 105°C, AWM-TEW plastic wire• SPT-1 wire available upon request• Specify length and wire type when ordering

• On hickey or bracket with holes, leads are pulled through unless otherwise specified

• IS104-S Series has aluminum screw shell with the same features as the IS104 Series

• IS104-X Series has octagonal flange which allows easy installation in deep cups

• UL Listed & CSA Certified

E-12

A

A

1-1/2"

FEMALEHICKEY

MALE NIPPLEHICKEY

SNAP-INCLIP TYPEHICKEY

SINGLE LEG HICKEYS

I3

Incandescent


IncandescentLampholders CANDELABRA BASE


Brackets For IS104, IS104S & IS104X Series

BRACKET DIMENSION DESCRIPTION OFNUMBER A MOUNTING HOLE

651 S 1-1/2" 1/8" IPS TAP EXTRUSION653 N 2" 1/8" IPS NIPPLE655 S 3" 1/8" IPS TAP EXTRUSION657 S 3-7/8" 1/8" IPS TAP EXTRUSION

BRACKET DIMENSION DESCRIPTION OF

NUMBER A MOUNTING HOLE

670 1-3/4" QUICK HICKEY

671 1-15/16" QUICK HICKEY

673 2" QUICK HICKEY

BRACKET DIMENSIONNUMBER A

691 2"692 2-3/8"693 3"

BRACKET DESCRIPTION OF

NUMBER A B MOUNTING HOLE

661 1-7/8" 1/2" 0.126"

BRACKET DESCRIPTION OFNUMBER A B MOUNTING HOLE

681 2-3/4" 13/32" 0.110"683 2-5/32" 13/32" 0.134"684 2-7/8" 3/4" 0.142"

BRACKET DESCRIPTION OF

NUMBER A B MOUNTING HOLE

665 1" 25/32" 0.126"

AA

A

A

B

B

A

B

TWO LEG HICKEY STRAIGHTBRACKET

SNAP-INBRACKET

“Z” TYPEBRACKET

ANGLEBRACKET

SPECIALBRACKET

I4

Inca

ndes

cent

Incandescent


IncandescentLampholdersCANDELABRA BASE


One Leg Hickey For IS-05 Series

Two Leg Hickey For IS-05 Series

BRACKET DESCRIPTION OFNUMBER A MOUNTING HOLE TYPE

761 4-1/16" 1/8" IPS TAP EXTRUSION INWARD763 4-1/8" QUICK HICKEY764 3-7/8" 1/8" IPS TAP EXTRUSION INWARD

BRACKET DESCRIPTION OFNUMBER A MOUNTING HOLE TYPE

771 1-23/32" 1/8" IPS TAP EXTRUSION OUTWARD772 1-25/32" 1/8" IPS TAP EXTRUSION OUTWARD773 2-3/16" 1/8" IPS TAP EXTRUSION OUTWARD774 3-1/16" 1/8" IPS TAP EXTRUSION INWARD775 4" 1/8" IPS TAP EXTRUSION OUTWARD776 4-5/32" 1/8" IPS TAP EXTRUSION OUTWARD777 3-15/16" 1/8" IPS TAP EXTRUSION OUTWARD778 2-1/8" 1/8" IPS TAP EXTRUSION OUTWARD779 3-51/64" 1/8" IPS TAP EXTRUSION INWARD780 1-15/16" 1/8" IPS TAP EXTRUSION OUTWARD781 4" 1/8" IPS TAP EXTRUSION INWARD

OA

H

1-27

/64"

39/64"

13/16"

IS05 Series Candelabra Lampholder With Screw Terminals

• High heat phenolic body• Aluminum screw shell standard• 25¼32" diameter over insulating lining• Available with brackets listed below

• Snap-on paper liner per UL Standard 1571• With #6-32, 3¼8" head terminal screws backed out• 75W, 125V• UL Listed & CSA Certified

E-12

A

A

A

SINGLE LEG HICKEYINWARD EXTRUSION

DOUBLE LEG HICKEYOUTWARD EXTRUSION

DOUBLE LEG HICKEYINWARD EXTRUSION

I5


IncandescentLampholders CANDELABRA BASE


3 1/2" - 4 3/4"

0.787" 20mm

IS05-751 Series Candelabra LampholderWith Two Leg Adjustable Hickey

• Two leg adjustable hickey• Dimension "A" adjustable from 31¼2" to 43¼4" simply by

loosening two screws on the slotted legs and tightening at therequired height

• Has 1¼8" IPS tap outward extrusion

• 75W, 125V• UL Listed & CSA Certified

E-12

A

0.708" 18mm

IS104-PS Series Candelabra Porcelain LampholderWith Two Leg Hickey

• Hi heat porcelain body with phenolic insulating cover• Screw terminals for wiring• Solid screw shell

• Overall height 2" (50mm)• Has 1¼8" IPS tap outward double leg hickey• CUL Listed and UL Listed

E-12

IS104PS IS104-PS2

1.97” 50mm 1.81” 46mm“A”

I6

Inca

ndes

cent

Incandescent


IncandescentLampholders

I7

EUROSTYLECANDELABRA LAMPHOLDERS

M10X1

1.76" 44.8mm

1.06" 27.0mm

•3 piece phenolic body, base, cap and shell• Set screw terminals for wiring• Smooth shell to fit into cup• 1¼8" IPS molded internal thread for mounting

• Available with set screw on base to hold on tothe 1¼8" IPS pipe

• Ratcheting locking base once assembled, will not come apartwithout depressing the lock release

• Rated 75W 120W

M10X1

1.76" 44.8mm

1.12" 28.0mm

• 3 piece phenolic body, base, cap and shell• Set screw terminals for wiring• Smooth shell to fit into cup• 1¼8" IPS molded internal thread for mounting

• Available with set screw on base to hold on to the1¼8" IPS pipe

• Ratcheting locking base once assembled, will not comeapart without depressing the lock release

• Rated 75W 120W

M10X1

1.76" 44.8mm

1.12" 28.0mm

• 3 piece phenolic body, base, cap and shell• Set screw terminals for wiring• Half outer thread on the body and shade ring are used to

assemble a glass or reflector to the body• 1¼8" IPS molded internal thread for mounting

• Available with set screw on base to hold on to the1¼8" IPS pipe

• Ratcheting locking base once assembled, will not come apartwithout depressing the lock release• Rated 75W 120W

IS105 Euro Style Phenolic Candelabrawith Smooth Shell

E-12

IS106 Euro Style Phenolic Candelabra with FullOuterThread and Phenolic Shade Ring

E-12

IS107 Euro Style Phenolic Candelabra with Half Outer Thread and Phenolic Shade Ring

E-12



I8

CANDELABRA BASE LAMPHOLDERS PHENOLIC WITH SNAP-IN CLIPS

7/8"0.768"

1-1/

4"

1-37

/64

1-15/32"

• Phenolic body with flared opening, outside diameter 25¼32"• Full brass screw shell• Spring tempered steel clips hold socket firmly in place• Snaps into 1" diameter hole in 1¼16" panel

• Height of socket from panel is 1" high• Standard leads are TEW or SPT-1, please specify type,

colour, length and stripping• 75W, 125V• UL Listed & CSA Certified

25/32"

1"

1-7/

16"

• Phenolic body with flared opening, outside diameter 25¼32"• Has skeleton type contacts in molded phenolic threaded body

riveted to bracket• Spring tempered steel clips hold socket firmly in place• Snaps into 1" diameter hole in 1¼32" to 1¼8" thick panel

• Standard leads are TEW or SPT-1, please specify type, colour, length and stripping


Socket snaps into 1" Dia. hole

In line on-off switch

Polarized SPT-1 cord

• Pre-assembled snap-in socket with feed through in-line ON-OFF switch on 6’ SPT-1 cord,with polarized male plug

• Ideal for illuminating ceramic handicrafts• Available in many different lengths, switch locations and free

ends; contact the factory for ordering information

• Simply snap in to 1" diameter hole in 1¼32" to 1¼8" thick panel• UL Listed & CSA Certified

NLS-1 Series Candelabra Snap-In Mount

NLS-1F Candelabra Snap-In Mount

NLS-1F 6SPT1SW24F Assembled Socket & CordWith In-Line Switch forCeramic Industry

E-12

E-12

E-12

Inca

ndes

cent

Incandescent


IncandescentLampholdersINTERMEDIATE KEYLESS LAMPHOLDERS

A

15/16"

27/3

2" 1-27

/64"

IS115 Phenolic Intermediate Base Lampholder

• Phenolic intermediate base lampholder• Has skeleton type screw shell• The unit is supplied with wire leads, please specify wire

length, type and end stripping• Also available with push-in terminals for adding

your own leads

• Various brackets and hickeys are available• UL Listed & CSA Certified

E-17

IS272 Keyless Two Piece PhenolicIntermediate Lampholder

• High heat phenolic body• Brass screw shell riveted to body• White or Silver painted reflector, which tightens

on screw shell• Concealed #6-32 terminals backed out for quick wiring

• Provided with two tapped #6-32 holes on 11¼2" centres formounting

• For maximum 40 Watt Type "S" Lamp• UL Listed & CSA Certified

E-17

I9



I10

INTERMEDIATE KEYLESS LAMPHOLDERS

1-1/

2"

1-1/4"

3/8"

B

1-23

/64"

IS201 Series Phenolic Keyless Lampholders

• High heat phenolic body• Aluminum screw shell is standard, brass or nickel-plated

copper available to order• Standard leads are 18 AWG, EXL 125°C, 12" long, stripped

1¼2" or specify desired length and type of wire• Also available less leads with eyelets for soldering• The above series are designed to accommodate a wide

variety of hickeys or brackets, which can be ordered fromthe

following pages.

• Insulating fibre cover or cap can be attached upon request• Also available with ground wire• Many configurations are available, as well as many

mounting options• Can be harnessed together for many applications, such as

bathroom strips or showcase lighting, etc.• White Urea lampholders are available to order• 660W,250V• UL Listed & CSA Certified

E-26

B

TERMINAL SCREWS (2)

1.41

8"

1-1/4"

1-23

/64"

IS275 Series Phenolic Keyless Lampholders With Screw Terminals

• High heat phenolic body• Aluminum screw shell is standard, brass or nickel-plated

copper available to order• The above series are designed to accommodate a wide


following pages.

• Insulating fibre cover or cap can be attached upon request• 660W, 250V• UL Listed & CSA Certified

E-26

Inca

ndes

cent

Incandescent

I11


IncandescentLampholdersPHENOLIC/PORCELAIN LAMPHOLDERS

KEYLESS, MEDIUM BASE

B

1-3/

8"

5/32"

137/

16"

1-3/8"

3/8"

IS211

B

1-15

/32"

11/32"

1-37

/64"

1-3/8"

IS211AP

IS211 Series Porcelain Keyless Lampholders

• Unglazed porcelain body with wireways• Available with deep wire well to meet UL AP requirements,

specify part number IS211AP• Aluminum screw shell is standard, brass or nickel-plated


1¼2" or specify desired length and type of wire• The above series are designed to accommodate a wide


following pages.

E-26

NPSF1/8-27T.P.I

1.98"

0.53"

1.50"

1.40"

AA02100AA

IS211T Series Porcelain Keyless Lampholders With Screw Terminals

• Unglazed porcelain body with wireways• Aluminum screw shell is standard, brass or nickel-plated

copper available to order• With screw terminals – for wiring

• The above series are designed to accommodate a widevariety of hickeys or brackets, which can be ordered fromthe following pages.

• Insulating fibre cover or cap can be attached upon request• Many configurations are available, as well as many

mounting options• 660W, 250V• UL Listed & CSA Certified

E-26



I12

PHENOLIC/PORCELAIN LAMPHOLDERSKEYLESS, MEDIUM BASE

Hickeys and Brackets For IS201 & IS211 Series

BRACKET DESCRIPTION OFNUMBER B MOUNTING HOLE

01 1/2" 1/8" IPS TAP EXTRUSION01 N 1/2" 1/8" IPS NIPPLE

01 NS 1/2" 1/8" IPS NIPPLE01 RS 1/2" 1/4" IPS TAP EXTRUSION01 S 1/2" 1/8" IPS TAP EXTRUSION

02 5/8" 1/8" IPS TAP EXTRUSION02 N 5/8" 1/8" IPS NIPPLE

02 RS 5/8" 1/4" IPS TAP EXTRUSION02 S 5/8" 1/8" IPS TAP EXTRUSION

03 RS 11/16" 1/4" IPS TAP EXTRUSION04 3/4" 1/8" IPS TAP EXTRUSION

04 N 3/4" 1/8" IPS NIPPLE04 RS 3/4" 1/4" IPS TAP EXTRUSION04 S 3/4" 1/8" IPS TAP EXTRUSION

05 1" 1/8" IPS TAP EXTRUSION05 N 1" 1/8" IPS NIPPLE

05 NS 1" 1/8" IPS NIPPLE05 RN 1" 1/4" IPS NIPPLE05 RS 1" 1/4" IPS TAP EXTRUSION


06 RN 1-1/4" 1/4" IPS NIPPLE06 RS 1-1/4" 1/4" IPS TAP EXTRUSION07 N 1-3/8" 1/8" IPS NIPPLE

08 1-1/2" 1/8" IPS NIPPLE08 N 1-1/2" 1/8" IPS NIPPLE


10 2" 1/8" IPS TAP EXTRUSION10 S 2" 1/8" IPS TAP EXTRUSION10 N 2" 1/8" IPS NIPPLE

11 2-1/8" 1/8" IPS TAP EXTRUSION12 2-1/2" 1/8" IPS TAP EXTRUSION13 2-3/4" 1/8" IPS TAP EXTRUSION14 3" 1/8" IPS TAP EXTRUSION

15 N 3-1/2" 1/8" IPS NIPPLE16 N 7/8" 1/8" IPS NIPPLE16 S 7/8" 1/8" IPS TAP EXTRUSION17 S 2-7/32" 1/8" IPS TAP EXTRUSION18 N 29/64" 1/8" IPS NIPPLE

B

STYLE 01. 02,03

B

STYLE 01N, 02N, 03N

B

STYLE 01S, 02S, 03S

STRAIGHTFEMALEHICKEY

MALENIPPLEHICKEY

SLANTEDFEMALEHICKEY

Inca

ndes

cent

Incandescent

I13




Side Hickeys For IS201 & IS211 Series

BRACKET DESCRIPTION OFNUMBER A B MOUNTING HOLE TYPE

37 N 15/16" 3/8" 1/8" IPS NIPPLE38 1-13/16" 13/32" 1/8" IPS OD UNTAPPED39 1-13/32" 1/2" 0.393" OD UNTAPPED

40 S 23/32" 9/16" 1/8" IPS TAP INSIDE EXTRUSION (SLANTED)41 N 1-1/8" 5/16" 1/8" IPS NIPPLE42 1-1/8" 5/8" 1/8" IPS TAP INSIDE EXTRUSION

42 N 1-11/32" 5/16" 1/8" IPS NIPPLE43 1-1/2" 3/8" 1/8" IPS TAP INSIDE EXTRUSION

43 S 1-1/2" 1/2" 1/8" IPS TAP INSIDE EXTRUSION (SLANTED)44 1-9/16" 5/16" 1/8" IPS TAP INSIDE EXTRUSION

44 N 1-9/16" 5/16" 1/8" IPS NIPPLE45 1-21/32" 9/16" 0.393" OD UNTAPPED

46 S 1-11/16" 1/2" 0.406" DIAMETER HOLE SLANTED46 N 1-11/16" 13/32" 1/8" IPS NIPPLE47 1-5/8" 11/32" 0.425" OD UNTAPPED48 1-11/16" 1/2" 0.393" OD UNTAPPED49 3-1/2" 1/4" 1/8" IPS TAP INSIDE EXTRUSION

49 N 3-1/2" 1/4" 1/8" IPS NIPPLE50 1-7/16" 3/8" 1/8" IPS TAP INSIDE EXTRUSION

50 A 1-7/16" 1/2" 1/8" IPS TAP INSIDE EXTRUSION (12° ANGLE)

50 S 1-7/16" 1/2" 1/8" IPS TAP INSIDE EXTRUSION (SLANTED)51 N 4-19/32" 31/32" 1/8" IPS NIPPLE52 1-1/2" 35/64" 0.430" OD UNTAPPED

53 N 3-5/16" 1/4" 1/8" IPS NIPPLE54 N 1-9/16" 25/64" 1/8" IPS NIPPLE55 1-3/4" 5/16" 1/8" IPS TAP INSIDE EXTRUSION56 1-5/16" 5/16" 1/8" IPS TAP INSIDE EXTRUSION

57 N 2-1/8" 5/16" 1/8" IPS NIPPLE58 3" 1/4" 1/8" IPS TAP INSIDE EXTRUSION59 1-1/2" 35/64" 0.484" X 0.374" SLOT UNTAPPED

A

B

A

B

with male nipplewith femaleinside extrusion

Inca

ndes

cent



I14


“Z” Brackets For IS201 & IS211 Series

BRACKET DESCRIPTION OFNUMBER A B MOUNTING HOLE TYPE

90 3/4" 5/16" 0.150" U OR I91 3/4" 1" NO. 4-40 TAP U OR I92 7/8" 5/32" 0.189" U93 7/8" 5/16" 0.166" U OR I94 7/8" 5/16" 0.142" U95 7/8" 7/32" 0.142" U (ANGLED, C=34°)96 1" 1/4" 0.142" X 0.174" SLOTTED U97 1" 1/2" 0.126" U98 1" 1-1/16" 0.126" U OR D99 1-1/32" 1-1/8" 0.138" U OR D

100 1-3/8" 3/16" 0.142" U101 3/4" 1" 0.138" U OR D102 3/4" 5/16" NO.8-32 TAP U OR D141 1-5/16" 31/64" 0.142" U OR D

A

B

A

B

B

A

C

B

“U” TYPE “D” TYPE

“I” TYPE “U” TYPE (ANGLE)

Incandescent

I15




Straight Brackets For IS201 & IS211 Series

BRACKET DESCRIPTION OFNUMBER A MOUNTING HOLE

120 7/8" NO. 6-32 TAP121 1-5/16" 0.142"122 1-3/8" 0.142"

A

A "U" TYPE

"D" TYPE

BB

Angle Brackets For IS201 & IS211 Series


60U OR D 3/4" 19/64" 0.158" (USE FOR QUICK HICKEY)

61U OR D 1-1/4" 19/64" 0.193"62U OR D 1-7/16" 7/16" 0.138"63U OR D 1-7/16" 11/32" 0.158"64U OR D 1-7/16" 11/32" 0.138"65U OR D 1-11/16" 5/16" 0.138"66U OR D 1-15/16" 9/32" 0.142"67U OR D 2-1/4" 1-1/8" NO. 8-32 TAP68U OR D 2-13/32" 9/32" 0.142"69U OR D 1-1/2" 9/32" NO.6-32 TAP70U OR D 1-7/16" 5/16" 0.142"

Inca

ndes

cent



I16


Snap-In Clips For IS201 & IS211 Series

BRACKETNUMBER A

401 3/8"402 1/2"

BRACKETNUMBER A

411U OR D 13/16"412U OR D 1-3/8"413U OR D 1-15/16"414U OR D 2"415U OR D 15/16"

BRACKETNUMBER A B

421U OR D 3/4" 15°422U OR D 3/4" 19°423U OR D 3/4" 23.5°424U OR D 27/32" 15°425U OR D 7/8" 25°426U OR D 15/16" 15°427U OR D 1" 10°428U OR D 1-3/8" 10°429U OR D 1-3/8" 18°430U OR D 1-3/8" 13°431U OR D 1-3/8" 11°432U OR D 1-31/32" 10°433U OR D 27/32" 10°434U OR D 1" 7°435U OR D 1-3/8" 7.5°

"U" TYPE

B A

"D" TYPE

B A

A"U" TYPE

A

"D" TYPE

A

Mounting panelthickness 0.015-0.040"(0.08" available on request)

0.395"

0.281"

VERTICAL TYPE

HORIZONTAL TYPE

ANGLED TYPE

Incandescent



I17


Brackets For IS201 & IS211 Series

BRACKETNUMBER A

458 1/2"459 3/4"460 11/16"

BRACKETNUMBER A B C

450 29/32" 1/2" 15°451 29/32" 1/2" 18°452 29/32" 2" 30°453 1-1/8" 1/2" 0°


165 N 1-21/32" 1/4" 1/8" IPS NIPPLE166 13/16" 1-1/4" 1/8" IPS TAP EXTRUSION

SNAP-IN

NON-SNAP-IN

A.281

.281

.718

.718

BA

C

A

B165N

A

B166


IncandescentLampholders PHENOLIC/PORCELAIN LAMPHOLDERS


Brackets For IS201 & IS211 Series (cont’d)

BRACKET DESCRIPTION OFNUMBER A B C D MOUNTING HOLE

157 1/2" 11/32" 1-11/32" 1-11/32" 1/8" IPS NIPPLE

A

C D

B

371 372

0.50

(12

.7)

0.32

8 (8

.33)

0.132 (3.35)0.125 (3.18)

0.12

5 (3

.18)

1.69

(42.

9)

0.69 (17.5)

0.75 (19.1)

0.75 (19.1)

0.38 (9.5)

0.12

5(3

.18)

PANEL

SUGGESTED PANEL LANCINGWITH ANTI-ROTATIONAL TAB

SOCKET AND CLIP IN PANEL. SLIDECLIP INTO PANEL LANCING AS SHOWN.

WIDTH OFLANCE

CENTER LINEOF SOCKET

FULLRADIUS

373

I18

Inca

ndes

cent


IncandescentLampholdersPORCELAIN LAMPHOLDERS


1-1/2"

1-23

/32"

27/32"

IS2209 Porcelain Keyless Lampholder WithTwo #6-32 Female Bushings For Mounting

• Unglazed porcelain body 123¼32" high and 11¼2" outerdiameter• Spring brass centre contact• Aluminum screw shell is standard, brass or nickel-plated

copper available to order

• Standard leads are 18 AWG, EXL 125°C, 12" long, stripped1¼2" or specify desired length and type of wire

• Available with screw terminals for wiring• Two threaded #6-32 female bushing for mounting• UL Listed & CSA Certified

E-26

27/32"

1-11

/16"

1-1/2"

IS2210 Porcelain Keyless LampholderWith Two #6-32" Screws For Mounting

• Unglazed porcelain body 111¼16" high with11¼2" outer diameter

• Spring brass centre contact• Aluminum screw shell is standard, brass or nickel-plated


1¼2" or specify desired length and type of wire

• Also available with screw terminals backed out and staked –specify part number IS2210-T when ordering

• Two #6-32 captive screws for mounting• Insulating cap IPS51 metal or IPS53 phenolic available• UL Listed & CSA Certified

E-26

I19

Incandescent


IncandescentLampholders PORCELAIN LAMPHOLDERS

SNAP-IN KEYLESS, MEDIUM BASE

(2) 6-32 TERMINAL SCREW

1-25/64(35.32)

27/32(21.43)

1-13/32(35.72)

1-11/16(42.86)

1-11/16(42.86)

39/64(15.48)

1-13/32(35.72)11/32(8.73)

1-17/32(38.89)

Panel Thickness 0.030-0.062 (0.76-1.57)

Suggested Panel Opening

IS212 Front Mount Shallow BackPorcelain Keyless Lampholder

• Unglazed porcelain body• Rust resistant spring tempered steel mounting clip riveted

to body• Aluminum screw shell is standard. Brass or nickel-plated


• Available with male quick connect tabs, #6-32 screwterminals, or wire leads

• Lampholders front mount into panel• Will accommodate 0.032" to 0.093" panel thickness• 660W, 250V• UL Listed & CSA Approved

E-26

IS213 Front Mount Shallow ShoulderPorcelain Keyless Lampholder

• Unglazed porcelain body• Rust resistant spring tempered steel mounting

clip riveted to body• Aluminum screw shell is standard. Brass or

nickel-plated copper available to order

• Available with male quick connect tabs, #6-32 screwterminals, or wire leads

• Lampholders front mount into panel• Will accommodate 0.032" to 0.093" panel thickness• 660W, 250V• UL Listed & CSA Approved

E-26

1-53/64(46.43)

21/64(8.33)

1-7/16(36.51)

Panel Thickness 0.035-0.045 (.89-1.14)

1-13/32(35.72)

5/16(7.94)

1-19/64

(32.94)

(2) 6-32 Terminal Screws

2-3/16(27.78)

1-5/8(41.28)

IS245P Rear Mount Porcelain Keyless Lampholder

• Unglazed porcelain body• Rust resistant spring tempered steel mounting clip riveted to body• Aluminum screw shell is standard. Brass or nickel-plated

copper available to order• Available with male quick connect tabs,

#6-32 screw terminals, or wire leads

• Mount from back of panel• Ideal for use in recessed cans and pot lights• Will accommodate 0.032" to 0.093" panel thickness• 660W, 250V• UL Listed & CSA Approved

E-26

I20

Inca

ndes

cent


IncandescentLampholdersPHENOLIC LAMPHOLDERS

SNAP-IN KEYLESS, MEDIUM BASE

1-25/64"

9/32"1-11/16" DIA

1-9/

16

1-13

/32"

DIA 11/32"

1-19/32"

IS242 Phenolic Keyless LampholderTop Flanged, Snap-In Clip

• One piece high heat phenolic body• U-shaped rust resistant tempered spring steel clip riveted

into the body• Aluminum screw shell is standard. Brass or nickel-plated


• Lampholders can be supplied with any type andlength of leads

• Ground lead available upon request• Front mount into panel• Will accommodate 0.032" to 0.093" panel thickness• UL Listed & CSA Certified

E-26

19/64"23/64"

1-13

/32"

DIA 11/32"

1-17/32"

1-23/64"DIA

1-11/16" DIA

1-37

/64"

IS243 Phenolic Keyless LampholderTapered Top Flange, Snap-in Clip

• One piece high heat phenolic body• U-shaped rust resistant tempered spring steel clip

riveted into the body• Aluminum screw shell is standard. Brass or nickel-plated

copper available to order• Lampholders can be supplied with any type and length of leads

• Ground lead available upon request• Front mount into panel• Will accommodate 0.032" to 0.060" panel thickness• UL Listed & CSA Certified

E-26

1-7/

16"

DIA .328

1.823

1-23/64" DIA

1-9/

16

1-5/8 DIA.FLANGE

5/167/64

IS245 Phenolic Keyless LampholderFlanged, Snap-in Clip

• One piece high heat phenolic body• U-shaped rust resistant tempered spring steel clip riveted into the body• Aluminum screw shell is standard. Brass or nickel-plated

copper available to order• Lampholders can be supplied with any type and length of leads

• Ground lead available upon request• Mounts from rear• Will accommodate 0.032" to 0.093" panel thickness• UL Listed & CSA Certified

E-26

I21

Incandescent


IncandescentLampholders PHENOLIC/PORCELAIN LAMPHOLDERS

MEDIUM BASE, OUTER THREADED BODY

2-1/

16

1-9/16 DIA.

IS241 Outer Threaded Phenolic Lampholder

E-26


501 S 1-1/16" 2-5/32" 1/8" IPS TAP EXTRUSION502 S 1-5/16" 2-13/32" 1/8" IPS TAP EXTRUSION503 S 1-9/16" 2-21/32" 1/8" IPS TAP EXTRUSION504 S 1-13/16" 2-29/32" 1/8" IPS TAP EXTRUSION505 S 2-1/16" 5-5/32" 1/8" IPS TAP EXTRUSION506 S 2-5/16" 3-13/32" 1/8" IPS TAP EXTRUSION507 S 2-9/16" 3-21/32" 1/8" IPS TAP EXTRUSION

510 TWO NO. 6-32 TAPPED HOLESOAH

1-13/16"

Brackets For IS241 Series

1-13

/16"

23/3

2"

27/32"

1/2"

1-9/

16"

2-1/

16

1-9/16"

A

IS241

IS241-502S

IS241-510

• Molded two piece outer threaded phenolic body• Available in White Urea upon request• Aluminum screw shell is standard. Brass or nickel-plated

copper available to order• Standard leads are 18 AWG, EXL 125°C, 12" long, stripped1¼2"• Can be supplied with any wire type• SVT and SJT 2 or 3 conductor wires are available for use

with pendant fixtures• Many bracket heights and types are available• Can be harnessed together for many applications, such as

bathroom strips, etc.• Supplied with adjustable metal or phenolic counter ring• UL Listed & CSA Certified

I22

Inca

ndes

cent


IncandescentLampholdersPHENOLIC/PORCELIAN LAMPHOLDERS

MEDIUM BASE, OUTER THREADED BODY

1-11/36"

1-3/8"

IS241P Outer Threaded Porcelain Lampholder

• Unglazed porcelain body with wireway for side wiring• Aluminum screw shell is standard. Brass or nickel-plated

copper available to order• Available with screw terminals or 18 AWG, EXL 125°C,

12" long leads, stripped 1¼2"• Can be supplied with any wire type• SVT and SJT 2 or 3 conductor wires are available for use

with pendant fixtures

• Available with 1¼8" IPS die cast or Bakelite caps• Brackets are available with tapped holes or 1¼8" IPS

female extension• Supplied with adjustable metal or phenolic counter ring• UL Listed & CSA Certified

E-26

2-3/8"

9/16"

ISP-08

2-3/8"

2-9/32"1/4" 13/32"

ISP-08

2-1/4"

2-1/64" 0.14

11/32"

ISP-11

Rings For IS241 & IS241P Series

PHENOLIC RING METAL (STEEL) RING METAL (STEEL) RING

I23

1.45"(36.8mm)

0.418"(10.6mm)

0.542"(13.77mm) 0.405"(10.27mm)

TCO SERIES - Thermal Cutouts and Covers®

• Available in heat plastic or metal to securely hold thermal cut out in recessed housings

• Plastic body is easily and quickly snapped in to holes in the panel

• For ease of assembly the cover should beinserted into the panel in the same direction as panel pouch

• Metal body has metel ears which are easily rolled over the secure to the panel

• Eliminates the need for heat shrink tubing• Greatly enhances the assembly time• Available in 5ºC increments

from 80ºC to 130ºC• Thermal cut out come with 6" SEW-1 leads

as standard. Other lengths available.

Part Number DescriptionTCO Plastic Cover Snap in plastic coverTCO Metal Cover Metal Cover with earsTCO-85C-6 Thermal Cut Out 85ºCTCO-90C-6 Thermal Cut Out 90ºCTCO-105C-6 Thermal Cut Out 105ºCTCO-110C-6 Thermal Cut Out 110ºCTCO-130C-6 Thermal Cut Out 130ºC

0.227"

(5.78mm)1.17"

(29.75mm)

0.520"13.2mm

0.320"8.10mm

0.125"3.17mm

0.475"

0.50

" (1

.27m

m)

0.50

" (1

.27m

m)

0.17

5" 4

.45m

m

0.17

5" 4

.45m

mTCO PLASTIC COVER TCO METAL COVER

Panel Thickness 0.020 - 0.035

0.200 (2)

0.20

0

0.135 (2) 0.150

1.305

0.62

5 ±

0.00

2

Incandescent




13/16"

3/4"

2-5/16"1-7/16" Centres

IS292 Porcelain Keyless Two PieceReceptacle, Two Screw Mounting

• High heat porcelain body• Aluminum screw shell is standard. Copper or nickel-plated

copper available to order• Concealed screw terminals under ring• Mounts using two screws through base on 17¼16" centres

• Also available with wire leads• 660W, 250V• UL Listed & CSA Certified

E-26

1-3/4"

20/32"

21/32"

IS313 Porcelain Keyless Sign Receptacle,With Wire Leads

• High heat porcelain body• Two locking notches to prevent rotation• Aluminum screw shell is standard. Copper or nickel-plated

copper available to order• Leads are 18 AWG, TEW 105°C, 9”long, stripped 1¼2”

• Other leads are available, specify type, length and stripping• Mounts into a 17¼16" diameter hole in panel• 660W, 250V• UL Listed & CSA Certified

E-26

IS322 Porcelain Keyless Sign Receptacle,With Screw Terminals

• High heat porcelain body• Slots available to protect against rotation• Aluminum screw shell is standard. Copper or nickel-plated


• Also Available with 0.250" male terminals or wire leads• Mounts into a 17¼16" diameter hole in panel• 660W, 250V• UL Listed & CSA Certified

E-26

I24

Inca

ndes

cent


IncandescentLampholdersPORCELAIN LAMPHOLDERS


1-31/32"

1"

17/32"

IS309 Porcelain Keyless Lampholder For UseWith Commercial Reflector Units

• Glazed high heat porcelain body• Aluminum screw shell is standard. Copper or nickel-plated

copper available to order• Screw terminals are standard with wireways at bottom of

socket; also available with wire leads, specify type, length

and stripping when ordering• Mounts using 2 screws through #8-32 holes in mounting ears• 660W, 600V• UL Listed & CSA Certified

E-26

1-3/32"

7/8"

#6-32 Tapped Hole

IS1501 Porcelain Angle Pan Socket®

• Unglazed porcelain body mounts at an angle ofapproximately 15° to pan

• Aluminum screw shell is standard. Copper or nickel-plated copper available to order

• Leads are 18 AWG, TEW 105°C 9" long, stripped 1¼2"

• Other leads are available, specify type, length and stripping• Bracket has one hole tapped #6-32 for screw mounting• Pedestal of this socket fits through piercing in pan• 660W, 250V• UL Listed

E-26

I25

Incandescent



KEYLESS

2.00

0(50

.8)

1-1/2(38.1)

A

7/16(11.11)

1/8-27

IS509 Side Outlet Porcelain Keyless LampholderC US

®

• One piece unglazed porcelain body with 1¼8" IPS-27 NPSfemale bushing and set screw

• The cap is keyed to the body to prevent rotation• Insulator assures isolation of the screw terminals

• The screws are staked and backed out for fast andeasy assembly

• Standard screwshell is aluminum; brass or nickel-plated brass is also available

• CULUS Listed

E-26

IS510 Twin Porcelain Keyless LampholderWith 1¼8" IPS Bushing C US

®

• Two piece unglazed porcelain body joined through a steel strap with 1¼8" IPS-27 NPS female bushing and set screw

• Standard is aluminum screw shell• Screw terminals are standard

• Screw terminals are staked and backed out for easy wiring• Also available with leads attached• CULUS Listed

E-26

1-21/32"

2"

1-1/2"

IS511 Short Body Twin PorcelainKeyless Lampholder C US

®

• One piece unglazed short body with 1¼8" IPS-27 NPSfemale bushing and set screw on stamped steel cap

• An insulator serves to isolate the cap from thescrew terminals

• Standard is nickel-plated copper alloy screw shell• Screw terminals are staked and backed out for easy wiring• CULUS Listed

E-26

I26

Inca

ndes

cent


IncandescentLampholdersPHENOLIC & METAL CAPS

FOR LAMPHOLDERS

ISP-50 Phenolic Cap for IS201, IS211& IS275 Series

• Phenolic cap with wire outlets on centre and side• For use on IS201, IS211, and IS275 series lampholders

• Cap accepts any hickeys or clips on the above sockets

ISP-51 Metal Cap for IS2210 & IS267S1¼8" IPS

• Metal caps for porcelain sockets IS2210 and IS267 series• Has 1¼8" IPS thread and screw set

• Available without set screw, order as ISP-51X

ISP-52 Metal Cap for IS2210 & IS267S1¼4" IPS

• Metal caps for porcelain sockets IS2210 and IS267• Has 1¼4" IPS thread and screw set

• Available without set screw, order as ISP-52X

ISP-53 Metal Cap for IS2210 1¼8" IPS

• Molded of high heat phenolic• Has 1¼8" IPS thread and screw set

• Available without set screw, order as IPS-53X

I27

Incandescent


IncandescentLampholders PHENOLIC TWO LIGHT

CLUSTER LAMPHOLDERS

.718"

.718

"

1-1/4"

2-31/64"

BA

TA

1-1/4"

2-31/64"

7/8"

TN

TA

BA

BN

1-47/64"

IS215 Series Phenolic Two Light Cluster Lampholders

• Twin socket molded of high heat phenolic,Black standard colour

• Available in White Urea• For 2 x 60W bulbs, overall distance is 93¼8"

with bulbs installed• Standard screw shell is aluminum• Available in many bracket configurations, fitted with nipples,

tapped holes, snap springs or bushings

• Standard nipples are 1¼8" IPS flat sided 5¼16" long• Rotary or pull switches are available• Standard leads are 18 AWG, TEW 105°C,

7" long, stripped 1¼2"• Items in () are optional and refer to the list of brackets below• UL Listed & CSA Certified

E-26

(G)-IS215-(801)-(842)-(7TEW)

LEAD LENGTH & TYPE

BOTTOM BRACKET NO.TOP BRACKET NO.

GROUND WIRE

BRACKET MOUNTINGNUMBER A B ALL BRACKETS ARE DOUBLE LEG

800 1" 1-1/4" SNAP SPRING801 1-1/16" 1-1/16" SNAP SPRING802 1-3/16" 1-7/16" SNAP SPRING803 1-11/32" 1-19/32" SNAP SPRING804 1-3/4" 2" SNAP SPRING805 2-3/8" 2-5/8" SNAP SPRING806 1-15/16" 2-3/16" SNAP SPRING807 2-1/2" 2-3/4" SNAP SPRING808 1-7/16" 1-11/16" SNAP SPRING809 2-3/32" 2-11/32" SNAP SPRING810 2-3/4" 3" SNAP SPRING820 1-19/32" 1-27/32" 1/8" IPS TAP EXTRUSION821 5/8" 7/8" 1/8" IPS TAP EXTRUSION822 1-1/8" 1-3/8" 1/8" IPS TAP EXTRUSION823 1-1/4" 1-1/2" 1/8" IPS TAP EXTRUSION824 1-1/2" 1-3/4" 1/8" IPS TAP EXTRUSION825 1-7/16" 1-11/16" NO. 6-32 THREAD826 1-3/4" 2" 1/8" IPS TAP EXTRUSION828 1-1/8" 1-3/8" 1/4" IPS NIPPLE830 1" 1-1/4" 1/8" IPS NIPPLE


A B

A B

TOP BRACKET

BOTTOMBRACKET

I28

Inca

ndes

cent


IncandescentLampholdersPHENOLIC TWO LIGHT

CLUSTER LAMPHOLDERS

A B


831 13/16" 1-1/16" 1/8" IPS NIPPLE832 1" 1-1/4" 1/8" IPS NIPPLE833 1-1/16" 1-5/16" 1/8" IPS NIPPLE834 1-1/8" 1-3/8" 1/8" IPS NIPPLE835 1-3/16" 1-7/16" 1/8" IPS NIPPLE836 1-11/32" 1-19/32" 1/8" IPS NIPPLE837 1-13/32" 1-21/32" 1/8" IPS NIPPLE838 1-1/2" 1-3/4" 1/8" IPS NIPPLE839 1-19/32" 1-27/32" 1/8" IPS NIPPLE840 1-3/4" 2" 1/8" IPS NIPPLE841 2-3/32" 2-11/32" 1/8" IPS NIPPLE842 2-3/8" 2-5/8" 1/8" IPS NIPPLE843 2-1/2" 2-3/4" 1/8" IPS NIPPLE844 1-1/4" 1-1/2" 1/8" IPS NIPPLE845 1-1/16" 1-5/16" 1/8" IPS NIPPLE846 1-13/16" 2-1/16" 1/8" IPS NIPPLE847 1-13/16" 2-1/16" 1/8" IPS NIPPLE848 1-7/16" 1-11/16" 1/8" IPS NIPPLE849 1-1/2" 1-3/4" 1/8" IPS NIPPLE850 1-13/32" 1-27/32" 1/8" IPS NIPPLE

Brackets For IS215 Series (cont’d) I29

Incandescent


IncandescentLampholders PHENOLIC THREE LIGHT

CLUSTER LAMPHOLDERS

1/8-27 THD

1/8-27 THD

2 FITTING

5/16

AB

7/16

IS235 Series Phenolic Three LightCluster Lampholders

• Molded of high heat phenolic• Available in White Urea• For 3 x 60W bulbs, overall distance is 91¼2"

with bulbs installed• Standard screw shell is aluminum• Available in many bracket configurations, fitted with nipples,

tapped holes, snap springs or bushings

• Standard nipples are1¼8" IPS flat sided 1¼2" long• Rotary or pull switches are available• Standard leads are 18 AWG, TEW 105°C, 7" long,

stripped 1¼2"• Items in () are optional and refer to the list of brackets below• UL Listed & CSA Certified

E-26

(G)-IS235-(865)-(865)-(7TEW)

LEAD LENGTH & TYPE

BOTTOM BRACKET NO.TOP BRACKET NO.

GROUND WIRE



860 5/16" 13/16" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP861 1/2" 1" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP862 3/4" 1-1/4" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP863 1" 1-1/2" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP864 1-1/2" 2" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP865 1-3/4" 2-1/4" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP866 2" 2-1/2" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP867 2-1/2" 3" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP868 3" 3-1/2" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP869 11/16" 1-3/16" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP870 7/8" 1-3/8" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP871 1-3/16" 1-11/16" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP872 1-5/16" 1-13/16" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP873 1-3/8" 1-7/8" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP874 1-7/8" 2-3/8" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP875 2-1/8" 2-5/8" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP876 2-3/8" 2-7/8" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP877 2-5/8" 3-1/8" 1/8" IPS THREADED HOLE, NIPPLE, SNAP-IN CLIP

Specify which one you require when ordering.

I30

Inca

ndes

cent


IncandescentLampholdersMEDIUM BASE ADAPTERS

& EXTENSIONS

1-1/2

1.275

1-11/16

IS270 Phenolic Adapter With Mounting Ears

• One piece phenolic body with standard male screw shell withreinforcing ring

• Has two ears on 19¼32" centres for mounting• Standard screw shell is aluminum. Brass or nickel-plated

brass available upon request• Adapter is available with or without leads

• Standard wire leads are 18 AWG, TEW 105°C,6" long, stripped 1¼2"

• Can be supplied harnessed to most sockets on request• 660W, 250V• UL Listed & CSA Certified

E-26

1-3/8

1-11/32

IS270-1 Phenolic Flanged Adapter

• One piece phenolic body with standard male screw shellwith reinforcing ring

• Standard screw shell is aluminum. Brass or nickel-platedbrass available upon request

• Adapter is available with or without leads

• Standard wire leads are 18 AWG, TEW 105°C,6" long, stripped 1¼2"

• Can be supplied harnessed to most sockets on request• 660W, 250V• UL Listed & CSA Certified

E-26

1-17/32

1.02

4"

2-7/

32"

MEDIUM BASE

IS276-A Porcelain One Piece ExtenderMedium to Medium

• One piece porcelain body• Used to extend lamp in cans and when using Capsulyte

halogen lamps• Extends lamp 11¼4" longer

• Standard screw shell is aluminum, nickel-plated copperavailable upon request


E-26

I31

Incandescent


IncandescentLampholders SPECIALTY LAMPHOLDERS FOR

CABINETRY & FURNITURE

1-15/32"

2-1/8"

1-35

/64"

29/3

2"

IS271 Keyless Two Piece Surface MountLamp Receptacle

• High heat phenolic body and cap 21¼8" outside diameter by 11¼32" overall height

• Cap tightens to screw shell• Aluminum screw shell is standard• Concealed #6-32 screw terminals backed out for easy wiring

• Provided with two #8-32 threaded brass bushings spaced on 17¼32" centres for mounting


E-26

8-9/16"(217)

2-3/

8"(5

9.8)

Curio LightBottom Turn Socket, Pre-WiredWith Cord, Reflector & Lamp ®

• Bottom turn ON-OFF socket mounted to painted steelreflector bracket

• Has 10’ SPT-2 Brown cord attached, with polarizedmale plug

• Comes with 25W T10 lamp installed in socket

• Mounts easily into cabinet using 2 screws onreflector bracket

• Install into a minimum space of 18" x 12" x 12"• UL Listed

E-26

I32

Inca

ndes

cent

Incandescent



I33

MEDIUM BASE HID 4KVPULSE RATED LAMPHOLDERS

1-1/2"

27/32"

NO 6-32 UNCSCREW

1-21

/32"

IS267S-1 Medium Base 4KV Pulse Rated Lampholder

• White glazed porcelain body• Copper alloy nickel-plated screw shell• Copper alloy nickel-plated centre contact• Standard leads are 18 AWG, SEW-2 (SF2) 600V 200°C,

12" long, or specify desired wire and length

• Supplied with insulating fibre• Supplied with two #6-32 mounting screws on 27¼32" centres• Die cast caps are available• 660W, 600V• UL Listed & CSA Approved

E-26

1-1/2"

27/32"

3/16"

NO 6-32 UNCSCREW

1-21

/32"

IS267S-2 Medium Base 4KV Pulse Rated Lampholder

• White glazed porcelain body• Copper alloy nickel-plated screw shell• Copper alloy nickel-plated centre contact• With screw terminals

• Supplied with insulating fibre• Supplied with two captive #6-32

threaded bushings on 27¼32" centres• Die cast caps are available• 660W, 600V• UL Listed & CSA Approved

E-26

IS268 Medium Base 4KV Pulse RatedSnap-In Mounting Lampholder

• White unglazed porcelain body• Copper alloy nickel-plated screw shell• Has high dielectric construction with heat resistant mica

insulator between screw shell and centre contact

• Snaps in from the top of panel• Available with screw terminals, wire leads,

or .250" x .032” male quick connect tabs• 660W, 600V• UL Listed & CSA Approved

E-26

Inca

ndes

cent



I34

MOGUL BASE HIDPULSE RATED LAMPHOLDERS

1-3/8"

2-41

/64"

IS4221 Series Mogul Base HID 4KV Pulse RatedLampholder

• White glazed porcelain body with wireways• Nickel-plated copper alloy screw shell with lamp grips• Stainless steel centre contact• Standard leads are 16 AWG, SEW-2, 200°C,

12" long, stripped 1¼2"

• Available with 8¼32" pal nuts or bushings, or 8¼32" captivescrews• Insulator is included• Rated 1,500W, 600V• UL Listed & CSA Certified

E-40

IS4221-1 SeriesScrew Terminal Type

2-5/32"1-3/8"

IS4221-2 SeriesLeads Lugged To Screw Shell

And Centre Contact2-5/32"1-3/8"

IS4221-3 SeriesMale Tab Type

2-5/32"1-7/16"

IS4221-4 SeriesLeads Lugged To Screws

At Back Of Socket2-5/32"1-3/8"

To order, add series type to part number. Example: IS4221-X for the series type, therefore IS4221-4-12SNPLW is leads luggedto back of socket, 12" SEW-2 leads, NPCSS, pal nuts and wireways.

ISP55 1¼4" IPS Metal Cap For IS4221 SeriesISP55-1¼2

1¼2" IPS Metal Cap For IS4221 Series

• Die cast mogul cap for IS4221 series lampholders• Caps have two #8-32 tapped mounting holes on 13¼8" centres

Incandescent



I35

BOTTOM TURN KNOBMEDIUM BASE SOCKETS

7/16"15/16"

1-37

/64

OAH

1-1/4" DIA

• One piece phenolic bottom turn socket, featuring built-in rotary switch with non-removable knob

• Corrosion protected bracket mounted on 1¼8" IPS flat-sided bushing

• Available with screw terminals or wire leads• Screws are #6-32, backed out

• Standard leads are 18 AWG, TEW 105°C, 6" long,stripped 1¼2"

• Other lengths and wire types are available to order• Supplied with hex nut installed• Finishing nut supplied separately• UL Listed & CSA Approved

ITEM OVERALLNUMBER HEIGHT

IS216-1 1-53/64"IS216-2 2-1/8"IS216-3 2-19/32"

.286"

9/32"2-

7/16

"

2"

1-5/16" OD

• Phenolic interior and removable husk, featuring built-inrotary ON-OFF switch with non-removable knob

• Flats on bushing and husk prevent rotation of husk and finishing nut

• Standard screw is shell is aluminum, brass or nickel-plated copper are available upon request

• Available with #6-32 screws, backed out,or eyelets for soldering

• Two husks are available: R Type for SPT-1and D Type for SPT-2

• UL Listed & CSA Approved

IS216 Single Light One Piece Bottom Turn Knob Socket

E-26

IS218 Single Light Two Piece Bottom Turn KnobSocket With Phenolic Husk

E-26


IncandescentLampholders INTERIOR MECHANISMS

MEDIUM BASE

• Phenolic body• Aluminum screw shell• Terminal screws are

backed out• UL Listed & CSA Certified

IS219I Push-Thru ElectrolierScrew Terminals

• Phenolic body, aluminum screw shell• Push through single circuit, no screws• Simply push in tin dipped 18 AWG

wire into wire leads and turning in of the binding screw

• Rated 660W 250V• UR recognized and CSA approved

IS219I-PI Push Thru ElectrolierPush In Wire Terminals

• Phenolic body• Aluminum screw shell• Terminal screws are backed out• Beaded chain, 5" long• Brass finish• UL Listed & CSA Certified

IS230I Pull Chain Electrolier

• Phenolic body• Aluminum screw shell• Two tabs on body lock to

prevent rotation• Terminal screws are backed out• UL Listed & CSA Certified

IS250I Keyless Electrolier

• Phenolic body• Aluminum screw shell• Single circuit ON-OFF• Terminal screws are backed out• Removable turn knob• UL Listed & CSA Certified

IS251I Turn Knob Electrolier

• Phenolic body• Aluminum screw shell• 3-Way L-M-H-OFF• Terminal screws are backed out• Removable turn knob• UL Listed & CSA Certified

IS253I Tri-Light ElectrolierScrew Terminals

• Phenolic body• Aluminum screw shell• 3-Way L-M-H-OFF• No screws, simply push in

tin-dipped 18 AWG wire into wire terminal. Eliminateswrapping of wire leads and turning in of the binding screw

• Rated 660W 250V• UR recognized &

CSA Approved

IS253I-PI Tri-Light ElectrolierPush In Wire Terminals

I36

Inca

ndes

cent



I37

METAL SHELL LAMPHOLDERSELECTROLIER MEDIUM BASE

CAP

1-1/16

1-1/16

1-1/16

SET SCREW

BUSHING

2-7/32

LININGEXTENDS1/16"-1/8"1-1/4"

1-19/64"

1-23/64"

CENTREOF KEYKNOB OR PULL CHAIN SHELL

• Cap/shell made from aluminum• Polished gilt finish or polished

brass finish is available• Standard cap bushing is 1¼8" IPS• Standard shell is without UNO thread• Available with or without set

screw on cap - add suffix - SS to part number for set screw, e.g. IS253M-SS

Standard Metal Shell Lampholder

• Insulated nylon push bars• Travel of push bar is 1¼4"• Interior is No. IS219I• Screw terminals backed out• 660W, 250V• UL Listed & CSA Certified

IS219M Push-Thru ElectrolierScrew Terminals

• Insulated nylon push bar• Travel of push bar is 1¼4"• Push through single circuit ON-OFF• No Screw, simple push in tin dipped

18 AWG wire into wire terminal. Eliminates wrapping of wire leads and turning in of the binding screw.

• Rated 660W, 250V• UR recognized & CSA approved

IS219M-PI Push-Thru ElectrolierPush In Wire Terminals

• Pull chain single circuit ON-OFF• Beaded chain 5" long, with end bell• Interior is No. IS230I• Screw terminals backed out• 660W, 250V• UL Listed & CSA Certified

IS230M Pull Chain Electrolier

• Interior has two projections thatprevent rotation in shell

• Interior is No. IS250I• Screw terminals backed out• Less set screw unless

otherwise specified• UL Listed & CSA Certified

IS250M Keyless Electrolier

• Single circuit ON-OFF electrolier• Removable turn knob is

molded plastic• Interior is No. IS251I• Screw terminals backed out• Less set screw unless


IS251M Turn Knob Electrolier

• 3-Way L-M-H-OFF• For operating a 2 filament lamp• Removable turn knob• Interior is No. IS253I• Screw terminals backed out• Less set screw unless

otherwise specified• 250W, 250V• UL Listed & CSA Certified

IS253M Tri-Light ElectrolierScrew Terminals

• 3-Way L-M-H-OFF• For operating 2 filament lamp• Removable turn knob• No Screw, simply push in tin dipped

18 AWG wire into wire terminal.Eliminates wrapping of wire leads and turning in of the binding screw


IS253M-PI Tri-Light ElectrolierPush In Wire Terminals

Incandescent

PHENOLIC SHELL LAMPHOLDERSELECTROLIER MEDIUM BASE



2-11

/16"

1-17/32"

3/4"

2-13

/32"

• Cap/shell made from highstrength phenolic

• Standard colour is Brown• Standard cap bushing is 1¼8" IPS• Standard shell is without thread• Available with or without set

screw on cap

Standard Phenolic Shell Lampholder

• Pull chain single circuit ON-OFF• Beaded chain 5" long, with end bell• Interior is No. IS230I• Screw terminals backed out• 660W, 250V• UL Listed & CSA Certified

IS230P Pull Chain Electrolier

• Interior has two projections thatprevent rotation in shell

• Interior is No. IS250I• Screw terminals backed out• Less set screw unless


IS250P Keyless Electrolier

• Single circuit ON-OFF electrolier• Removable turn knob is

molded plastic• Interior is No. IS251I• Screw terminals backed out• Less set screw unless


IS251P Turn Knob Electrolier®

• 3-Way L-M-H-OFF• For operating a 2 filament lamp• Removable turn knob• Interior is No. IS253I• Screw terminals backed out• Less set screw unless

otherwise specified• 250W, 250V• UL Listed & CSA Certified

IS253P 3-Way ElectrolierScrew Terminals

• Insulated nylon push bar, travel of push bar is 1/4”

• Push bar through single circuit ON-Off• No Screw, simply push in tin dipped

18 AWG wire into terminal. Eliminates wrapping of wire leads and turning in of the binding screw


IS219P-P1 Tri-Light ElectrolierPush In Wire Terminals

• Insulated nylon push bar, travel of push bar is 1/4”

• Push bar through single circuit ON-Off• Screw terminals are backed out• Rated 660W, 250V• UR recognized & CSA approved

IS219P Tri-Light ElectrolierPush In Wire Terminals

• 3-Way L-M-H-OFF• For operating 2 filament lamp• Removable turn knob• No Screw, simply push in tin dipped

18 AWG wire into wire terminal. Eliminates wrapping of wire leads and turning in of the binding screw


IS253P-P1 Tri-Light ElectrolierPush In Wire Terminals

I38

Inca

ndes

cent



I39

CEILING AND SURFACEMEDIUM BASE LAMPHOLDERS

IS260 Ceiling Medium Base Receptacle with Pull Chain Switch

• Two piece heavy duty phenolic body allow forinterior replacement

• Mounts on 4" outlet boxes• Mounting screws are provided• 2" of ball chain with 36" pull cord and bell is provided• 4 backed out screws for easier wiring

• Standard colour is white• Rated 660W at 250V• CULUS listed

IS261 Ceiling Medium Base Keyless ReceptacleC US

®

• Two piece heavy duty phenolic body allow forinterior replacement

• Mounts on 4" outlet boxes• Mounting screws are provided• 4 backed out screws for easier wiring

• Aluminum screw shell is standard• Standard colour is white• Rated 660W at 250V• CULUS listed

IS262 Ceiling Medium Base Receptacle with Pull Chain SwitchC US

®

• Two piece heavy duty porcelain body allow forinterior replacement

• Mounts on 4" outlet boxes and have breakouts for 31¼4" boxes• Mounting screws are provided• 2" of ball chain with 36" pull cord and bell is provided

• 2 backed out screws for easier wiring • Standard colour is white• Rated 660W at 250V• CULUS listed

IS263 Ceiling Medium Base Receptacle with Pull Chain SwitchC US

®


• Mounts on 4" outlet boxes• Mounting screws are provided• 2" of ball chain with 36" pull cord and bell is provided


E-26

E-26

E-26

E-26

Incandescent



I40

CEILING AND SURFACEMEDIUM BASE LAMPHOLDERS


®

• Two piece heavy duty phenolic body• Mounts on 4" outlet boxes and have breakouts for 31¼4" boxes• Mounting screws are provided• 2 backed out screws for easier wiring

• Aluminum screw shell is standard• Standard colour is white• Rated 250W at 250V


®




IS266 Ceiling Medium Base Receptacle with Pull ChainSwitch and Outlet C US

®




Light Bulb Wire CageC US

®

• Used to protect lamps from accidental impact• Guard opens easily for bulb change

• Mounts to any of the ceiling lampholders which havea grooved neck

Inca

ndes

cent



I41

WEATHERPROOF MEDIUM BASELAMPHOLDERS

1.89" 48mm

1.59" 40.5mm

1.47" 37.4mm

0.59" 4"

IS513 Phenolic Pin Type Weatherproof LampholderC US

®

• Two piece heavy duty phenolic body• Accepts no. 14 AWG or no. 12 AWG stranded insulated wire• Ideal for stringing multiple lamps on the same conductors• As the cap is screwed on, the pin terminals pierce the

insulation of the wire to provide a safe positive connectionwithout stripping, bending or tightening screws.

• Has an integral molded screw shell withskeleton type contacts

• Rated 660W at 250V• CULUS listed

IS514 Phenolic Pin Type Weatherproof Lampholder with HookC US

®

• Two piece heavy duty phenolic body• Accepts no. 14 AWG or no. 12 AWG stranded insulated wire• Ideal for stringing multiple lamps on the same conductors• As the cap is screwed on, the pin terminals pierce the

insulation of the wire to provide a safe positive connectionwithout stripping, bending or tightening screws.

• With detachable plated steel wire hook• Has an integral molded screw shell with

skeleton type contacts• Rated 660W at 250V• CULUS listed

B-B

1.40

" 35

.5m

m

1.65

" 41

.8m

mIS515 Rubber Pigtail Weatherproof Lampholder

C US®

• Used for utility light applications, indoors or outdoors.Example, temporary lighting during building construction

• Rubber sockets have an extended lip to seal against the lamp• Aluminum screw shell is standard

• 6" TEW 18 AWG leads are standard, other wire typeand lengths can be special ordered

• Rated 660W at 250V• CULUS listed

E-26

E-26

E-26

Incandescent

Inca

ndes

cent



I42

TAPS, OUTLETS, ADAPTERELECTRICAL ACCESSORIES

1-1/

4"(3

1.4m

m)

1-1/16"(27.4mm)

IS280 Socket Reducer Adapter Intermediate to Candelabra

• Phenolic body with brass screw shell• Converts medium base to candelabra base

• Simply screws into existing lampholder• Rated 250W 250V

1-7/

8"(4

7.9m

m)

1-5/8"(41.2mm)

IS281 Socket Reducer Adapter Mogul to MediumC US

®

• Porcelain body with aluminum screw shell• Converts mogul base to medium base

• Simply screw into existing lampholder• Rated 660W 250V

1-1/

4"(3

1.4m

m)

1-1/16"(27.4mm)

IS279 Socket Reducer Adapter Medium to Candelabra

• Phenolic body with brass screw shell• Converts medium base to candelabra base


15/1

6"(2

3.8m

m)

11/16"(17.5mm)

IS278 Socket Reducer Adapter Intermediate to Candelabra

• Brass screw shell• Converts intermediate base to candelabra base


E-17 E-12

E-26 E-12

E-26 E-17

E-40 E-26

Incandescent



I43

TAPS, OUTLETS, ADAPTERELECTRICAL ACCESSORIES

IS285-BR Pull Chain Current Tap with Two Outlets - BROWNIS285-IV As Above in - IVORY C US

®

• Phenolic body• Screws into standard medium base socket• Pull chain operates the lampholder only

• Available in Brown and Ivory• Rated 660W 125V• CULUS listed

IS283 Medium Base to Plug Base 1-15R Adapter - BrownIS283-IV As Above in - IVORY C US

®

• Phenolic body• Parallel slots for 1-15P polarized plugs• Screws into standard medium base socket


IS284-BR Medium Base Socket Adapter - BROWNIS284-IV As Above in - IVORY C US

®

• Phenolic body• Plugs into an ordinary outlet and converts it to a

lampholder socket


IS286-BR Keyless Twin Socket Adapter - BROWNIS286-IV As Above in - IVORY C US

®

• Phenolic body• Screws into standard medium base socket• Converts a single socket to a double socket


Documents

INCANDESCENT 1850 Wilson Avenue, Toronto, … more information call 1-800-661-9610(canada) 1-888-762-5384(usa) incandescent lampholders candelabra base lampholders phenolic with outer