Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
1
THE ULTIMATE &
MOST DURABLE
INDESTRUCTiBLEHANDLE technology
STRIKING TOOLS
GH 01
NEVERREPLACE
A HAMMERAGAIN!
Outlasts wood & fibreglass handle hammers by
thousands of overstrikes !
33
STEEL LOCKING PLATE ELIMINATES HEAD GETTING LOOSE OR FALLING APART
Vulcanized Rubber handle
ABSORBS IMPACT & VIBRATION, REDUCING
USER FATIGUE
MADE FROM SPECIAL GRADE OF OZONE
RESISTANT RUBBER FOR USE IN TOUGH OUTSIDE
ENVIRONMENTS
Hi Visibility
HeadADDS INSTANT
IDENTIFICATION ON ANY JOB SITE
Drop Forged Head WITH STRIKING ENDS INDUCTION HARDENED 52-56 HRC
Steel ReInforced Lanyard Hole
Spring Steel bars
9/32” (7.1 mm) DIA. SPRING STEEL BARS RESIST OVERSTRIKE
WITHOUT BREAKING
Textured Non Slip
Grip
INDESTRUCTIBLE HANDLE
technology
4
In our desire to build the world’s strongest Sledge Hammer, we tested our Indestructible Handle Sledge Hammer against Sledges with different handles. We attached each Sledge to an Electronic drive machine & tested for both Direct & Overstrikes at a strike rate of 80 blows per minute
DIRECT STRIKE TEST OVERSTRIKE TEST
OUTSTANDING DURABILITY
Wood Handle broke in 450 Strikes
Fibre Glass Handle broke is 7,000 Strikes
Groz Indestructible Handle Hammers recorded 36,000 blows, with no evidence of deformation
Wood Handle broke in 208 Overstrikes
Fibre Glass Handlebroke in 4,126 Overstrikes
Groz Indestructible Handle Hammers recorded 36,000 blows, with no evidence of deformation
55
STRIKES ON WOODEN HANDLE
450
STRIKES ON FIBRE GLASSHANDLE
7,000
WE STOPPEDCOUNTING AFTER
STRIKES
the result
36,000
6
THE BEST THE WORLD HAS EVER SEEN!
IMPACT - ABSORBING HANDLESPRING STEEL BARSSTEEL LOCKING PLATE
superiorhandle
construction
Groz Indestructible Handle Sledge Hammers meet ANSI specifications "Hand Tools - Heavy Striking Tools Safety Requirements"
Groz Indestructible Handle Sledge Hammers meet BS 876 specifications for material, hardness & performance BS 876
7
• Indestructible handle is made with 4 spring steel bars that run all the way through the handle. Bars are
locked with the Hammer head using Steel locking plates ensuring that the head never gets dislodged
• Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue
• Special Bonding process ensures that head never gets loose from the handle
• Hammer Head is forged from special steel & is Induction case hardened to 52 to 56 HRC for extended life
INDESTRUCTIBLEHANDLE
club HAMMERS
• Driving in Stakes• Metalforming• Setting Bolts• Minor Demolition Work
CAT NR. ORDERING NR. HEAD WEIGHT HANDLE LENGTH
lbs kgs inch mm
CHID/2.5/12 34500 2.5 1.1 12 300
CHID/4/12 34501 4 1.8 12 300
CHID/4/16 34502 4 1.8 16 400
STEEL LOCKING PLATE
4 SPRINGSTEEL BARS
ERGONOMIC RUBBER GRIP HANDLE
APPLICATIONS
Best Seller
Do not strike objects harder than 40 HRC. Striking items of a greater hardness is liable to cause fracture or chipping
Working Temperature Range -10°C (14°F) to 50°C (122°F)
8
• Indestructible handle is made with 6 spring steel bars that run all the way
through the handle. Bars are locked with the Hammer head using Steel
locking plates ensuring that the head never gets dislodged
• Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue
• Special Bonding process ensures that head never gets loose from the handle
• Hammer Head is forged from special steel & is Induction case hardened to
52 to 56 HRC for extended life
INDESTRUCTIBLEHANDLE SLEDGE
HAMMERS
STEEL LOCKING PLATE
6 SPRINGSTEEL BARS
ERGONOMIC RUBBER GRIP HANDLE
• Driving in Stakes• Heavy Demolition Work• Construction: Fracturing
Stone & Concrete• Driving Fence Posts• Police , Fire & Rescue• Rebar Work• Railroads• Bending & Shaping Metal
CAT NR. ORDERING NR. HEAD WEIGHT HANDLE LENGTH
lbs kgs inch mm
SHID/6/24 34510 6 2.7 24 600
SHID/6/30 34511 6 2.7 30 750
SHID/8/24 34512 8 3.6 24 600
SHID/8/30 34513 8 3.6 30 750
SHID/10/30 34514 10 4.5 30 750
SHID/12/30 34515 12 5.5 30 750
SHID/14/30 34516 14 6.3 30 750
APPLICATIONS
Best Seller
Do not strike objects harder than 40 HRC. Striking items of a greater hardness is liable to cause fracture or chipping
Working Temperature Range -10°C (14°F) to 50°C (122°F)
9
• Indestructible 14” (350 mm) long handle is made with spring steel bars that run all the
way through the handle. Bars are locked with the Hammer head using Steel locking
plates ensuring that the head never gets dislodged
• Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue
• Special Bonding process ensures that head never gets loose from the handle
• Hammer Head is forged from special steel & is Induction case hardened to 52 to 56
HRC for extended life
INDESTRUCTIBLEHANDLE
BALL PEINHAMMERS
• Bending & Shaping Metal• Driving Punches & Chisels• Concrete & Stone Work• Hand Forging• Setting Rivets• Peen Riveted & Welded
Material• Texturing face of Metal
CAT NR. ORDERING NR. HEAD WEIGHT HANDLE LENGTH
oz. inch mm
BPID/24/14 34540 24 14 350
BPID/32/14 34541 32 14 350
APPLICATIONS
Do not strike objects harder than 40 HRC. Striking items of a greater hardness is liable to cause fracture or chipping
Working Temperature Range -10°C (14°F) to 50°C (122°F)
10
• Indestructible 16” (400 mm) long handle is made with spring steel bars that run
all the way through the handle. Bars are locked with the Hammer head using
Steel locking plates ensuring that the head never gets dislodged
• Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue
• Special Bonding process ensures that head never gets loose from the handle
• Hammer Head is forged from special steel & is Induction case hardened to
52 to 56 HRC for extended life
INDESTRUCTIBLEHANDLE
CROSS PEIN HAMMERS
• Heavy Forging• Bending & Shaping Metal• Spreading Metal• Driving Punches &
Chisels• Driving Masonry Drills• Concrete & Stone Work• Starting Panel pins &
tacks
CAT NR. ORDERING NR. HEAD WEIGHT HANDLE LENGTH
lbs kgs inch mm
CPID/2/16 34530 2 0.9 16 400
CPID/3/16 34531 3 1.4 16 400
APPLICATIONS
Do not strike objects harder than 40 HRC. Striking items of a greater hardness is liable to cause fracture or chipping
Working Temperature Range -10°C (14°F) to 50°C (122°F)
11
• Indestructible handle is made with spring steel bars that run all the way
through the handle. Bars are locked with the Hammer head using Steel
locking plates ensuring that the head never gets dislodged
• Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue
• Special Bonding process ensures that head never gets loose from the
handle
• Hammer Head is forged from 99.9% pure Copper for Spark free use
• Copper Head resists sparking & reduces marring of most struck surfaces
INDESTRUCTIBLEHANDLE copper
head club hammer
• Metal Forming• Mining• Underground Coal
Mining
CAT NR. ORDERING NR. HEAD WEIGHT HANDLE LENGTH
lbs kgs inch mm
CHID/4/12/CU 34600 4 1.8 12 300
APPLICATIONS
STEEL LOCKING PLATE
4 SPRINGSTEEL BARS
ERGONOMIC RUBBER GRIP HANDLE
Working Temperature Range -10°C (14°F) to 50°C (122°F)
12
STEEL LOCKING PLATE
6 SPRINGSTEEL BARS
ERGONOMIC RUBBER GRIP HANDLE
• Mining• Underground Coal
Mining
INDESTRUCTIBLEHANDLE
copper head sledge hammer
CAT NR. ORDERING NR. HEAD WEIGHT HANDLE LENGTH
lbs kgs inch mm
SHID/8/24/CU 34610 8 3.6 24 600SHID/14/30/CU 34611 14 6.4 30 750
• Indestructible handle is made with spring steel bars that run all the way
through the handle. Bars are locked with the Hammer head using Steel
locking plates ensuring that the head never gets dislodged
• Ergonomic rubber grip handle absorbs shock & vibration reducing fatigue
• Special Bonding process ensures that head never gets loose from the handle
• Hammer Head is forged from 99.9% pure Copper for Spark free use
• Copper Head resists sparking & reduces marring of most struck surfaces
APPLICATIONS
Working Temperature Range -10°C (14°F) to 50°C (122°F)
13
Indestructible Technology makes our HAMMERS ideal for use in mining AND construction jobs, where a failure is more than just an inconvenience
14
Club Hammers
Sledge Hammers (6 to 10 lbs)
Sledge Hammers (12 to 14 lbs)
Ball Pein Hammers
Cross Pein Hammers
Copper Head Hammers
Construction: Fracturing Stone & Concrete Y Y
Minor Demolition Work Y
Heavy Demolition Work Y Y
Driving Fence Posts Y Y
Driving in Stakes Y Y Y
Setting Bolts Y
Rebar Work Y Y
Railroads Y Y
Police , Fire & Rescue Y Y
Concrete & Stone Work Y
Driving Masonry Drills Y
Mining Y Y
Underground Coal Mining Y
Metalforming Y Y
Heavy Forging Y
Hand Forging Y
Bending & Shaping Metal Y Y
Spreading Metal Y
Texturing face Of Metal Y
Starting Panel pins & tacks Y
Setting Rivets Y
Peen Riveted & Welded Material Y
Driving Punches & Chisels Y Y Y
Whilst every effort has been made to ensure accuracy of information given in this catalogue at the time of going to print, Feb 2012, our policy of continuous improvement determines the right to change specifications without notice. Customers must ensure that goods are suitable for the purpose intended.
Groz Engineering Tools (P) Ltd.Groz Net Industries
Village Kherki Daula, National Highway-8Gurgaon-122001, Haryana, INDIATEL +91.124.282.7700 / 221.4050FAX +91.124.2827986 / 221.4224FAX (USA) +1.509.271.7848FAX (UK) +44.870.121.1854
E-MAIL [email protected] www.groz-tools.com
The GROZ name, GROZ logo and the mark are trademarks of Groz Engineering Tools (P) Ltd., India
16
Sledge Hammers are used, abused & misused day-in & day-out. Used for heavy demolition work in construction environments, railroad, underground mining etc. , these are rough use tools that take a lot of beating. No matter how much care you take, incorrectly hitting the hammer on the handle instead of the head cannot be avoided. Conventional Wooden Handle & Fibre Glass handles cannot take this. They fall apart not just when overstriked, but in a few hundred strikes even when used with full care.
Here comes a Hammer that just doesn’t get damaged. The Groz INDESTRUCTIBLE hammer won’t stop no matter what you do to it. Paying a little extra compared to conventional hammers for a lifetime of use works out to a fraction of the cost than what you would spend buying mutiple units of conventional hammers for the same Job.
THINK LONG TERM, BUY GROZ!
The Worlds most Cost Effective Sledge Hammers !