Index of Standards

Sr. No. DESCRIPTION BS1 Code for temperature measurement 1041

2 Measurement of fluid flow by means of orifice plates nozzles and Venturi tubes BS EN ISO 5167-1

3 1646

4 Methods for determining, thermal classification of electrical insulation 2757

5 Dimensions of temp., detecting elements and, corresponding pockets 27656 Specification for bursting, disc and bursting disc devices 2915

7 Specification for observation and gauge glass for pressure vessels 34638 Recommendation for the design of scales and indexes 3693

9 Graphic symbols for electric power, telecommunications and electronics 393910 Guide to selection of methods of measuring noise11 Steel compression coupling for tubes 436812 Acoustic and electro acoustic technology 4727

13 International Thermocouple Reference Tables BS EN 60584-2 & BS 184314 Specification for butterfly control valves15 Dial type extension, thermometer 523516 Specification for PVC insulated instrument cables 530817 Steel ball valves 535118 Safety signs and colours 537819 Components of Automatic Fire Detection Systems 5445 - EN 5420 Part1-Point type smoke Detectors 5446

21 5467

22 Protecting coating of iron steel structures23 Fire safety signs, notice & graphic symbols 5499

24 British standard for equip in hazardous area25 Part 2-Specification for Manual Call-Point 583926 Instrument signal ranges 586327 PVC insulated cables, for electric power and ,lighting 6004

28 Mechanical Cable Glands for Elastomeric and Plastic Insulated Cables 6121 & BS EN 5026229 Positive displacement Meters30 Turbine meters 6169

31 Specification for PVC insulated cables for switchgear and control gear wiring 623132 Polythene insulation and sheath of electric cable 6234

33 Code for Practice for Fire Protection for Electronic Data processing Installation 6266

34 6346

35 636036 Valves of cryogenic service 636437 Methods for testing insulation 646938 Insulated flexible cards 650039 Testing of Valves 6755

40 695941 Cryogenic tanks, Ethylene storage low temperature tanks 777742 Solenoid valve coil insulation 2557-3

43 Electromagnetic Capability for Industrial Process Measurement and control BS EN 60801

44

EN 50014 TO 020

534545 Specification for degrees of protection provided by enclosures EN 60529

46 Electrical Apparatus for Potentially Explosive Atmospheres-General Requirements EN50 014

47 EN50 018

48 Electrical Apparatus for Potentially Explosive Atmospheres-Intrinsically safe "i" EN50 02049 BS 6174

50 Specification of absolute & gauge pressure Transmitter with electrical output BS 644751 Method of calc. & classification of torque measuring device BS 7882

Symbolic representation, for process measurement, control functions and instrumentation

4196 & EN 23741/2

5155 & BS EN 593

Specs. for Armored cable with Thermosetting Insulation for Electric supply, (requirements and test methods of digital and power cables)

5493-BSEN ISO 12944/14713

5501 & EN50014/5/7/8/9/20/28/39

6169

PVC insulated, PVC sheathed, heavy duty armoured and un-armoured Digital cablesPolyethylene Insulated Cables for working voltages up to and incl.110 V. (Digital and power cable specs.)

Selection, Installation, use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases

Electrical apparatus for potentially explosive atmospheres (It covers flame proof enclosure and intrinsic safety)

50028 & 039,

Electrical Apparatus for Potentially Explosive Atmospheres-Flameproof enclosure "d"

Specification of differential TX. with electrical output

Back

http://www.instrumentationguide.com/main.asp?p=23

American Petroleum Institute (API)

Sr. No. DESCRIPTION API

1 Test procedure for pressure relieving devices, against various back pressure 525

2 527

3 540

Valves inspection and, testing (leak test on soft seated valves) 598

5 Steel gate valves flanged and butt welding ends 6006 Class 150 corrosion resistant gate and check valves 603

7 Fire test for soft seated quarter turn valves (butterfly, ball) 607

8 Metal ball valves-flanged and butt welding ends 6089 Lug and wafer type butterfly valves 609

Centrifugal pumps for refinery 61011 Steam turbines general purpose 611

Steam turbines special purpose 61213 Special purpose gear units for refinery service 613

14 Lubrication, shaft sealing and control oil for special application 61415 Gas turbine for refinery service 616

16 Centrifugal compressors 617Reciprocating compressors 618

18 Rotary type positive displacement compressors 61919 Low pressure storage tanks 620

20 Monitoring systems for protection of equipment 67021 Packaged integrally geared centrifugal air compressor 672

22 Positive displacement pumps-Reciprocating 67423 Positive displacement pumps-controlled volume 675

24 Accelerometer based vibration monitoring system 678

25 Packaged reciprocating plant and instrument air compressor 68026 Developing a public Awareness program for operators 1162

27 Marking Liquid Petroleum pipeline Facilities 110928 Venting, Atmospheric, and Low Pressure storage Tanks 2000

29 2001

30 Method of gauging petroleum and petroleum, products 254531 Calibration of tanks 2550

32 Liquid calibration of tanks 2555

33 261034 Storage and handling of LPG 2510 A

35 Noise control in pumps (Sound control of mechanical equipment)615676

36 Pipe line valves, End closures, connectors and, swivels (to check leak) 6D

37 Specification for fire test for valves 6FA38 Vocabulary (Spanish version) Chapter 1

39 Tank Calibration by Internal Electro-Optical Distance-Ranging Method Chapter 2.2D40 Introduction to Proving Systems Chapter 4.1

41 Pipe Provers Chapter 4.242 Small Volume Provers Chapter 4.3

43 Field-Standard Test Measures Chapter 4.7

44 Chapter 4.9.1

45 Chapter 4.9.2

46 Chapter 4.9.3

47

48 Loading Rack and Tank Truck Metering System for Non-LPG Products chapter 6.2

49

50 Chapter 11.151 New Chapter 12.1.2

52 Chapter 12 Section 2

53 Calculation Procedures for Liquefied Petroleum Gases (New document)

54 Measuring, Sampling, Testing and Base Conditions for Natural Gas Fluids Chapter 14 Section 1

55 Installing and Proving Density Meters used to Measure Hydrocarbon Liquid Chapter 14 Section 6

56 New Chapter 17.1

57 New Chapter 17.658 Vessel Experience Factors

59 Chapter 19.261 Chapter 19.462 Proving Systems Chapter 463 General Considerations for Measurement by Meters Chapter 5 Section 1

64 Measured of Liquid Hydrocarbons by Turbine Meters Chapter 5 Secton365 Chapter 5 Section 4

66 Chapter 5 section 5

67 Metering Systems for Loading and Unloading Marine Bulk carriers Chapter 6 Section 568 Pipeline Metering Systems Chapter 6 section 6

69 Temperature Determination Chapter 770 Sampling Chapter 8

71 Standard practice for level measurement in stationary tanks by ATG

72

73

74

75 RP 52076 Guide to pressure relieving, and de-pressuring system RP 521

77 Flanged steel safety relief valves RP 52678 RP 550

79 RP 55180 Process Measurement Instrumentation RP 551

81 RP520 Pt.1

82 Transmission systems RP 55283 Inspection of Atmospheric & low pressure storage tank RP 575

84 cathodic protection of aboveground petroleum storage tanks RP 65185 Lining of aboveground petroleum storage tanks RP 652

86

87 Refractory installation quality control guidelines RP 93688 Avoiding environmental cracking in Amine units RP 945

89 Management of process hazards associated with RP 752

90 Recommended practice for retail or consumer Aviation Fusing Facilities RP 1501

91 RP 1626

92 RP 222093 Overfill protection RP 2350

94 RP 14H

95

96 RP 5B1

97 Recommended Practice for Testing Well Cements RP 10B

98 Recommended Practice for Drill Stem Elements and Operating Limits RP 7G

99 Recommended Practice for Drilling Fluid Processing Systems Evaluation RP 13C

100 Recommended Practice for Rheology and Hydraulics of Oil-well Drilling Fluids RP 13D

101 Recommended Practice for Shale Shaker Screen Cloth Desigination RP 13E102 Guidelines for Mud Engineers RP 13L103 Recommended Practice for Testing Heavy Brines RP 13J

104 Recommended Practice for Laboratory Testing Drilling Fluids RP 13I105 Evaluation procedures for casting,tubing connections RP 5C5

106 RP520 Pt. 2

Commercial seat tightness of safety Relief valves with metal to metal seats.

Electrical apparatus for potentially explosive atmospheres (It covers flame proof enclosure and intrinsic safety)

4

10

12

17

Fire protection facilities for petroleum refineries and oil/gas processing plants

Design,construction,operation,maintenance,& inspection of terminal & tank facilities

Introduction to Determination of the Volume of Displacement and Tank ProversDetermination of the Volume of Displacement and Tank Provers by the Waterdraw Method of CalibrationDetermination of the Volume of Displacement and Tank Provers by the Master Meter Method of CalibrationDetermination of the Volume of Displacement and Tank Provers by the Gravimetric Method Chapter 4.9.4

Determination of Water and Sediment in Crude Oil by the Centrifuge Method, Laboratory Procedure Chapter 10.3 VCF Calculation Procedures for Tank CarsInstructions for Calculating Liquid Petroleum Quantities Measured by Turbine Meters

New 12.1.3

Guidelines for Marine Cargo Inspection (Spanish version) Guidelines for Determining Fullness of Pipelines Between Vessels and Shore Tanks (Spanish version)

New Chapter 17.9 Evaporative Loss from Floating Roof Tanks

Speciation of Evaporative Losses

Accessory Equipment for liquid MetersFidelity and Security of Flow Measurement Pulsed-Data Transmission Systems

Manual of petroleum measurement ch-3, sec-1a & sec-1b

Standard practice for level measurement of liquid hydrocarbons in stationary pressurized storage tank by ATG

Manual of petroleum measurement ch-3 sec 4

Standard practice for level hydrocarbon measurement on marine vessels by ATG

Manual of petroleum measurement ch-3 sec-4

Standard practice for level measurement of light hydrocarbon liquids onboard marine vessels by ATG

Manual of petroleum measurement ch-3 sec-5

Sizing, selection, and installation of pressure, relieving system in refineries (Relieving capacity)

Installation of flow instrument

Installation standards for all instruments

Recommended Practice for the Design and Installation of Pressure-Relieving Systems in Refineries-Design

Management of process hazards associated with location process plant buildings

Recommended practised for storing & handling ethanol & gasoline-ethenol blends at distribution terminals & service stations.Improving owner & contractor safety performance committee on petroleum measurement

Installation,maintainance,& repair of surface safety valves & underwater safety valves offshoreRecommended practice for ultrasonic & magnetic examination of offshore structuresThreading,gauging & Thermal inspection of casting,tubing & line pipe threads

Recommended Practice for the Design and Installation of Pressure-Relieving Systems in Refineries-Installation

Indian Boiler Regulation Act (IBR)

Sr. No. DESCRIPTION IBR

1 Steam system design pressure 293

International Organization for Standards (ISO)

12345

6

7

891011

1213

14151617

18

Sr. No.


DESCRIPTIONInternational system for unitsSteel compression couplings for tubesPositive displacement MetersTurbine metersMechanical vibration of machines 10 to 200 rev/s

Symbolic representation, for process measurement control functions and instrumentation

Methods of measurement of fluid flow: estimation of uncertainty of a flow rate measurementTemp. measurement systemQuantity system principals and applicationsQuantity systems

Symbolic representation, for process measurement, control functions and instrumentationSpecification for bursting, disc and bursting disc devices

Guide to selection of methods of measuring noiseSafety signs and coloursProtecting coating of iron steel structuresPVC insulated cables. for electric power and, lighting

Positive displacement Meters

Specification for square-edged orifice plates nozzles and Venturi tubes inserted in circular cross section conduits running full


ISO10001179271427152954

3461

5167

5168831090009001

35116718

3864147138423

2714/2715

3740 To 3746

American Society of Mechanical Engineers (ASME)

Sr. No.

1234

56

7

89101112

13141516171819202122232425

26


DESCRIPTION

Relief valve design Pipe threadsOrifice flangesLarge diameter flanges (above 24")

Glossary of Terms Used in the Measurement of Fluid Flow in Pipes

Measurement Of Fluid Flow In Closed Conduit By Means Of Electromagnetic Flowmeters

Measurement Of Fluid Flow In Pipes Using Orifice, Nozzle & Venturi Not An ANSI StandardMeasurement Of Fluid Flow In Pipes Using Vortex FlowmetersMeasurement Of Fluid Flow Using Small Bore Precision Orifice MetersMeasurement of Gas Flow by Turbine MetersMeasurement Of Liquid Flow In Closed Conduits By Weighing Method

Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic FlowmetersMeasurement Uncertainty for Fluid Flow in Closed ConduitsMethod For Establishing Installation Effects On Flow MetersBimetallic Actuated ThermometersDiaphragm SealsPressure Gauges And Gauge AttachmentsPressure Limiter ValvesSnubberThermometers, Direct Reading and Remote ReadingStainless Steel PipeWelded and Seamless Wrought Steel PipeGraphic Symbols for Heating, Ventilating and Air ConditioningGraphic Symbols for Pipe Fittings, Valves and Piping

Graphic Symbols for Process Flow Diagrams in Petroleum and Chemical Industries

Fluid Flow in Closed Conduits: Connections for Pressure Signal Transmissions Between Primary & Secondary Devices


ASME

B 1.20.1B 16.36B 16.47

MFC-8MMFC-11M

MFC-16M

MFC-3MMFC-6MMFC-14MMFC.4MMFC-9M

MFC.5MMFC.2MMFC-10MB40.3B40.2B40.100-1998B40.6B40.5B40.200B36.19MB36.10MY32.2.4Y32.2.3

Y32.11

"Boiler pressure vessel code" section 8 and 1,

Indian Standards (IS)

ITEM DESCRIPTION1 Insulated flexible cards2 Cable trays/racks from MS HR sheets

3 Methods for determining, thermal classification of electrical insulation4 Design, Materials, and performance

5

67 Criteria for earthquake design8 Flame proof enclosures for elect, apparatus9 Hot dip galvanization of cable trays/racks10 Hot dip galvanization of cable trays/racks11 Recommended current, rating for cables

1213 Specification for Galvanized steel wire14 Noise generating equipment15 Electrical equipment for use in hazardous areas16 Classification of Hazardous Areas for Electrical Installations17 PVC insulation and sheath of electric cable18 Noise generating equipment19 Polyethylene insulation and sheath of electric cable20 Cross linked polyethylene, insulated PVC sheathed, cables21 Conductors for insulated, electric cables and flexible, cards

22

23 Classification of max. surface temp. of electrical equipment in explosive areas24 Noise generating equipment25 Methods for testing insulation

26 Polyethylene insulated & PVC sheathed cables rated Upto including 440/750V

27

PVC insulated, PVC sheathed, heavy duty armoured and un-armoured---Digital cablesPolyethylene Insulated Cables for working voltages Upto and incl.110V. (Digital and power cable specs.)

Polyethylene Insulated Cables for working voltages Upto and incl.110V (Digital and Power cable specs.)

Polyethylene Insulated Cables for working voltages Upto and incl. 110V (Digital and power cable specs.)

Selection, Installation and Maintenance of Automatic Fire Detection and Alarm System Code of Practice (Third Revision)

Indian Standards (IS)

IS694

1079

12711436

1554

159618932148262926393961

3961397545785571557258316098647470988130

8130

82391053410810

1596

2189

American Society for Testing Materials (ASTM)

Sr. No. DESCRIPTION ASTM1 Temp measurement system 14.03

2 Cover bolts for temperature gauge glass A 1933 Nuts for temperature gauge A 194

4 Sampling stream/system D 1066

Sr. No. DESCRIPTION DIN1 Industrial Resistance Thermometer Elements 43670

Explosion protection

2 Determination of explosion limits of gases and gas/air mixtures

3 Explosive atmospheres-explosion prevention and protection-Part:1 Basic concepts and methodology

4

5

6

7

8Protection against electric shock

9 Hand tools for live working at voltages up to 1000V-Extension bars (with male /female driving squares)10 Hand tools for live working at voltages up to 1000 V-Tee handle square drives11 Hand tools for live working at voltages up to 1000 V-Screwdrivers for slotted head screws12 Hand tools for live working at voltages up to 1000 V -Screwdrivers for cross-recessed head screws13 Hand tools for live working at voltages up to 1000 V-Keys with handle for hexagon socket screws14 Hand tools for live working at voltages up to 1000 V-Socket single hexagon tee wrenches15 Hand tools for live working at voltages up to 1000 V- spin type socket wrenches16 Hand tools for live working at voltages up to 1000 V-Single headed, open-ended engineers wrenches17 Hand tools for live working at voltages up to 1000 V-Single-end, deep offset box wrenches18 Hand tools for live working at voltages up to 1000 V-Square drive hexagon socket wrenches19 Hand tools for live working at voltages up to 1000 V-Ratchet handles20 Electrically insulating footwear for use on low voltage installations21 DIN EN 60990 1999-09

Radiation protection22 Protective gloves against ionizing radiation and radioactive contamination DIN EN 421 1994-06

23

24 Screens for laser working places-Safety requirement and testingAlarm and warning systems

26 DIN EN 50133-2-1 1998-09

27 DIN EN 50133-7 1998-09

28 Alarm systems-Social alarm systems-Part 1: System requirements DIN EN 50134-1 1999-10

29 DIN EN 50134-2-1 1995-11

30 Alarm systems-Social alarm systems-Part3:Local unit and controller

31

32 DIN EN 50136-1-2 1996-07

33

34

35 DIN EN 50136-2-1 1997-02

36 DIN EN 50136-2-2 1997-02

37

38 DIN EN 50136-2-4 1997-02

39 Alarm transmission systems; part4:annuciation equipment DIN EN 50136-4 1994-0340 Electrical apparatus for the detection of combustible gases in domestic premises DIN EN 50194 1996-01

41

42 DIN EN 50241-2 1996-1143 Guide for selection, installation, use and maintenance of domestic combustible gas detectors DIN EN 50244 1998-0744 DIN EN 50271 1998-0845 Electrical apparatus for the detection of carbon monoxide in domestic DIN EN 50291 1998-0646 DIN EN 50292 1998-06

Deutsche Industries Norm (DIN)

DIN EN 51649-1 1986-12

DIN EN 1127-1 1997-10 Potentially explosive atmospheres-Explosion prevention and protection-Part1:Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres: Trilingual version pr EN 13237-1:1998 DIN EN 13237 1998-07 Explosion protection systems; part1:determination of explosion indices of combustible dust in air (ISO 6184-2:1985) DIN EN 26184-1 1991-06 Explosion protection systems; part 2:determination of explosion indices of combustible gases in air (ISO 6184-2:1985) DIN EN 26184-2 1991-06 Explosion protection systems; part3: determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures (ISO 6184-3:1985 ) DIN EN 26184-3 1991-06 Explosion protection systems: part4: determination of efficacy of explosion suppression systems (ISO 6184-4:1985) DIN EN 26184-4 1991-06

DIN 7434 1998-08 DIN 7436 1998-08 DIN 7437 1998-08 DIN 7438 1998-08 DIN 7439 1998-08 DIN 7440 1998-08 DIN 7445 1998-08 DIN 7446 1998-08 DIN 7447 1998-08 DIN 7448 1998-08 DIN 7449 1998-08 DIN 50321 1998-08Protection against electric shock-Draft IEC 60990, Edition 2: Methods of measurement of touch current

and protective conductor current (IEC 74/518/FDIS:1999)

Protective clothing against radioactive contamination -Part 1: Requirements and test methods for ventilated protective clothing against particular radioactive contamination DIN EN 1073-1 1998-02

DIN EN 12254 1999-02

25 Guide for the selection , installation, use and maintenance of apparatus for the detection and measurement of combustible gases DIN EN 50073 1996-11Alarm systems-Access control systems for use in security applications-Part2-1: General requirements for components

Alarm systems-Access control systems for use in security applications-Part7: Application guidelines

Alarm systems-Social alarm systems-Part 2-1:Trigger devices

DIN EN 50134-3 1995-11Alarm systems-Alarm transmission systems and equipment-Part1-1:General requirements for alarm transmission systems DIN EN 50136-1-1 1996-07 Alarm systems-Alarm transmission systems and equipment-Part 1-2:Requirements for systems using dedicated alarm pathsAlarm systems-Alarm transmission systems and equipment-Part1-3:Requirements for systems with digital communicators using the public switched telephone network DIN EN 50136-1-3 1996-07 Alarm systems-Alarm transmission systems and equipment-Part 1-4:Requirements for systems with voice communicators using the public switched telephone network DIN EN 50136-1-4 1996-07 Alarm systems-Alarm transmission systems and equipment-Part2-1:General requirements for alarm transmission equipment Alarm systems-Alarm transmission systems and equipment-Part 2-2:Requirements for equipment used in systems using dedicated alarm pathsAlarm systems-Alarm transmission systems and equipment-Part2-3:Requirements for equipment used in systems with digital communicators using the public switched telephone network DIN EN 50136-2-3 1997-02 Alarm systems-Alarm transmission systems and equipment-part2-4:Requirements for equipment used in systems with voice communicators using the public switched telephone network

Specification for open path apparatus for the detection of gases and vapours-Part1:General requirements and test methods DIN EN 50241-1 1996-11 Specification for open path apparatus for the detection of gases and vapours-Part2:Performance requirements for apparatus for the detection of combustible gases

Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen-Requirements and tests for detectors using software and/or digital technologies

Electrical apparatus for the detection of carbon monoxide in domestic premises-Guide on the selection, installation ,use and maintenance

National Fire Protection Association (NFPA)

Sr. No DESCRIPTION1 Water spray fixed systems2 Dry chemical extinguishing system3 Flammable and combustible liquids4 Storage and handling of LPG

5 Fire hazardous properties of flammable liquids, gases and volatile solids6 Intrinsically safe apparatus in div 1 hazardous location7 Production. storage and handling of LNG

8 Fire and smoke detection system

9 Standard for Automatic Fire Detectors

National Fire Protection Association (NFPA)

NFPA15173058

325493

59 A

CENELEC

NFC-72E

Institute of Electrical & Electronic Engineers (IEEE)

Sr. NO.

1


DESCRIPTION

Guidelines for Documentation of Computer Software for Real Time and Interactive Systems


IEEE

IEEE

Institute of Petroleum (IP)

Sr. No. DESCRIPTION1 Automatic tank level gauging

2 Area classification code for petroleum installation3 Refinery safety code4 Large bulk storage and refrigerated LPG

5 Fire precautions at petroleum refineries & bulk storage installation

Institute of Petroleum (IP)

IP205/71

PART 15PART 3PART 9

Part 19

Oil Industry Safety Directorate (OISD)

ITEM

123


Fire protection facilities for petroleum refineries and oil/gas processing plantsFire protection facilities for depots and terminalsLPG bottling plant operation

DESCRIPTION


OISD

116117144

International Electromechanical Commission (IEC)

Sr.No.123

45

678910111213

141516

171819

20

21

22

23

24252627

282930

31323334353637

383940

41

42

434446


DESCRIPTIONInternational standards for resistance of copperInstrument transformersColours of indicating lights and push buttons

Standard rated current of fuse links for low voltage fuses

Polyethylene insulated & PVC sheathed cables rated Upto including 440/750V.Conductors for insulated, electric cables and flexible, cardsElectric relaysLow voltage fusesStandard colours for insulating low frequency cables and wiresFire resisting Characteristics of electric cablesControl switchesMarking of insulated and bare conductors by colour

Stabilized power supply DC outputSpecification for degrees of protection provided by enclosures

Industrial -Process Control Valves, Part4: inspection and Routine TestingIndustrial-Process Control Valves, Part 5: Marking

International thermocouple reference tablesGraphic symbols for electric power, telecommunications and electronics

Electrical measuring transducers for converting AC quantities to DC electrical quantities

Mineral insulated cables, and their termination, with rated voltage not. exceeding 750v

Common methods for insulating and sheathing, materials of electric cables

Common test methods for insulating and sheathing materials of electric cablesCircuit breakersMeasurement of smoke density of electric cables, under fire conditionsTest on electric cables, under fire conditions

Electrical Apparatus for Explosive gas Atmospheres, part 14:Electrical Installation in Hazardous Areas (Other than mines)

Electrical Apparatus for Explosive Gas Atmospheres, Part17 : Inspection and Maintenance of Electrical Installation in Hazardous Areas (Other than Mines)

Electrical Apparatus for Explosive Gas Atmospheres, Part 19: Repair and Overhaul for Apparatus Used in Explosive Atmospheres Other than Mines or Explosive)

Guides for the inclusion of Reliability Clauses into Specification of Components (or Parts) for Electronic Equipment

Industrial -Process Control Valves, Part 8: Noise Considerations, Section2:Laboratory Measurement of Noise Generated by Hydrodynamic Flow Through Control ValvesIndustrial-Process Control Valves, Part 8:Noise Consideration, Section4:Prediction of Noise Generated by Hydrodynamic Flow

Specs. for armored cables with Thermosetting Insulation for Electric supply, (requirements and test methods of digital and power cables)

Instrument signal rangesThermocouple, extension and compensating cablesTest on gases evolved during combustion of materials from cables

Electro magnetic compatibility for industrial process measurement and controlSpecification of conduit fitting for electrical installationAcceptance test of steam turbine control systemProgrammable controllersNuclear instrumentationDimension of metal sheathed thermometer elementsField bus standard for control system

Radiation Protection & Monitoring instruments

Performance of gas analyzers

Expression of Performance of Electrochemical Analyzers, Part 1: General

Expression of Performance of Electrochemical Analyzers, Part2: pH valueProgrammable Controllers, Part 1: General InformationProgrammable Controllers, Part 2: Equipment Requirements and TestsProgrammable controllers, Part 3: Programming LanguagesProgrammable controllers, Part 4: User GuidelinesMethods for determining, thermal classification of electrical insulationInstrument signal ranges

Ultrasonic-continuous -wave Doppler

Controllers with Analogue signals for Use in Industrial-Process Control Systems,Part1: Methods of Evaluating the PerformanceControllers with Analogue Signals for Use in Industrial-Process Control Systems, Part2: Guidance for Inspection and Routine Testing


IEC600286004460073

60017.14

60079.17

60079.1960088

6022760228602556026960304603316033760391

604096047860529

60534-460534-5

60534-8.2

60534-8.46058460617

60688

60702

60811

60811

60885609346103460332-3

60381-160584-360754-1

60801-3610356106461131611516115261158

6120661207

60546-1

60546-260746-1

60746-261131-161131-261131-361131-46008560381

61171/61343/42/43

American National Standards Institute (ANSI)

Sr. No.12

3

4567891011121314

15

16


DESCRIPTIONControl Valve Seat LeakageFace to face and end to end dimensions of ferrous valves

Test on valves

Steel valves, Flanges and , Butt weld ends (Valve design, body pressure temperature rating)Steel valves, Flanges and Butt weld endsHydro static testing on control valvesPipe flanges and flanged fittings, steel nickel alloy and other special alloySteel pipe flanges and, flanged fittingsSteel pipe flanges, and fittingsPower pipingChemical Plant and Petroleum Refinery PipingGauges-pressure and vacuum gaugesSurface texture gasket seating area)Surface texture

Temperature measurement, thermocouples

Thermocouples, extension and compensating cables


ANSI70.2B 16.10

B 16.104

B 16.34B 16.34B 16.37B 16.5B 16.5B 16.5B 31.1B 31.3B 40.1B 46.1B 46.1

MC 96.1

MC 96.1

API SPEC 6D

API 526

API 527

ANSI/API STD 594

API 598

ANSI/API 599

ANSI/API 600Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries - Modified National Adoption of ISO 10434:1998.

API 602

ANSI/API 603

ANSI/API 607

Specification for Pipeline Valves. API Specification 6D is an adoption of ISO 14313: 1999, Petroleum and Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves. This International Standard specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems.

Flanged Steel Pressure Relief Valves. The standard is a purchase specification for flanged steel pressure relief valves. Basic requirements are given for direct spring-loaded pressure relief valves and pilot-operated pressure relief valves as follows: orifice designation and area; valve size and pressure rating, inlet and outlet; materials; pressure-temperature limits; and center-to-face dimensions, inlet and outlet.

Seat Tightness of Pressure Relief Valves R(2002). Describes methods of determining the seat tightness of metal- and soft-seated pressure relief valves, including those of conventional, bellows, and pilot-operated designs.

Check Valves: Flanged, Lug, Wafer and Butt-welding. API Standard 594 covers design, material, face-to-face dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for two types of check valves.

Valve Inspection and Testing. The standard covers inspection, supplementary examination, and pressure test requirements for both resilient-seated and metal-to-metal seated gate, globe, plug, ball, check, and butterfly valves. Pertains to inspection by the purchaser and to any supplementary examinations the purchaser may require at the valve manufacturer's plant.

Metal Plug Valves - Flanged, Threaded and Welding Ends. A purchase specification that covers requirements for metal plug valves with flanged or butt-welding ends, and ductile iron plug valves with flanged ends, in sizes NPS 1 through NPS 24, which correspond to nominal pipe sizes in ASME B36.10M. Valve bodies conforming to ASME B16.34 may have flanged end and one butt-welding end. It also covers both lubricated and nonlubricated valves that have two-way coaxial ports, and includes requirements for valves fitted with internal body, plug, or port linings or applied hard facings on the body, body ports, plug, or plug port.

Compact Steel Gate Valves - Flanged, Threaded, Welding, and Extended-Body Ends. The standard covers threaded-end, socket-welding-end, butt-welding-end, and flanged-end compact carbon steel gate valves in sizes NPS4 and smaller.

Corrosion-Resistant, Bolted Bonnet Gate Valves - Flanged and Butt-Welding Ends. The standard covers corrosion-resistant bolted bonnet gate valves with flanged or butt-weld ends in sizes NPS 1/2 through 24, corresponding to nominal pipe sizes in ASME B36.10M, and Classes 150, 300, and, 600, as specified in ASME B16.34.

http://www.engineeringtoolbox.com/iso-standards-d_760.html

API 609

API 6FA

API 6FC

API 6RSReferenced Standards for Committee 6, Standardization of Valves and Wellhead Equipment.

API 11V6

ANSI/API RP 11V7

API 520-1

API 520-2

ANSI/API 574

ANSI/API 576

ANSI/API 608

Fire Test for Soft-Seated Quarter Turn Valves. The standard covers the requirements for testing and evaluating the performance of straightway, soft-seated quarter-turn valves when the valves are exposed to certain fire conditions defined in this standard. The procedures described in this standard apply to all classes and sizes of such valves that are made of materials listed in ASME B16.34.

Butterfly Valves: Double Flanged, Lug- and Wafer-Type. The standard covers design, materials, face-to-face dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for gray iron, ductile iron, bronze, steel, nickel-base alloy, or special alloy butterfly valves that provide tight shutoff in the closed position and are suitable for flow regulation.

Specification for Fire Test for Valves. The standard covers the requirements for testing and evaluating the performance of API Spec 6A and Spec 6D valves when exposed to specifically defined fire conditions.

Fire Test for Valve with Automatic Backseats. The standard covers the requirements for testing and evaluating the performance of API Spec 6A and Spec 6D valves with automatic backseats when exposed to specifically defined fire conditions.

Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves. The standard sets guidelines for continuous flow gas lift installation designs using injection pressure operated valves.

Recommended Practice for Repair, Testing, and Setting Gas Lift Valves. The standard applies to repair, testing, and setting gas lift valves and reverse flow (check) valves.

Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries: Part I - Sizing and Selection. The recommended practice applies to the sizing and selection of pressure relief devices used in refineries and related industries for equipment that has a maximum allowable working pressure of 15 psig (1.03 bar g or 103 kPa g) or greater.

Recommended Practice 520: Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries-Part II, Installation. The recommended practice covers methods of installation for pressure-relief devices for equipment that has a maximum allowable working pressure of 15 psig (1.03 bar g or 103 kPa g) or greater. It covers gas, vapor, steam, two-phase and incompressible fluid service.

Inspection Practices for Piping System Components. The standard covers the inspection of piping, tubing, valves (other than control valves) and fittings used in petroleum refineries.

Inspection of Pressure Relieving Devices. The recommended practice describes the inspection and repair practices for automatic pressure-relieving devices commonly used in the oil and petrochemical industries.

Metal Ball Valves - Flanged and Butt-Welding Ends. The standard covers Class 150 and Class 300 metal ball valves that have either butt-welding or flanged ends and are for use in on-off service.

Country Standard No.

Germany

A. D. Merkblatt A2

TRD 421

TRD 721

United Kingdom, UK BS 6759

France

AFNOR NFE-E

29-411 to 416

NFE-E-29-421

Korea KS B 6216

Japan JIS B 8210

Australia SAA AS1271

USA

ASME I

ASME III

ASME VIII

ANSI/ASME PTC 25.3

API RP 520

API RP 521

API STD 526

API STD 527

Europe EN ISO 4126

International ISO 4126

Description

Pressure Vessel Equipment safety devices against excess pressure - safety valves

Part 1 specification for safety valves for steam and hot water

Part 2 specification for safety valves for compressed air and inert gas

Part 3 specification for safety valves for process fluids

Safety and relief valves

Safety and relief valves

Spring loaded safety valves for steam boilers and pressure vessels

Steam boilers and pressure vessels - spring loaded safety valves

Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels

Boiler applications

Nuclear applications

Unfired Pressure Vessel Applications

Safety and Relief Valves - performance test codes

Sizing selection and installation of pressure relieving devices in refineries, Part 1 Design, Part 2 Installation

Guide for pressure relieving and depressurizing systems

Flanged steel pressure relief valves

Seat tightness of pressure relief valves

Safety devices for protection against excessive pressure

Safety valves - general requirements

Technical Equipment for Steam Boilers Safeguards against excessive pressure - safety valves for boilers of groups I, III & IV

Technical Equipment for Steam Boilers Safeguards against excessive pressure- safety valves for steam boilers group II

Documents

Index of Standards