Dear Sir, Thank you for your interesting in our production line. I am pleasure to provide quotation as fellow. If you have any questions, please don’t hesitate to contact me. Potato Peeler: Use for peeling the raw potato, with the help of special emery lining inside the feeder, Our peeler is designed aesthetically and is used to peel the skin of potatoes in faster way. Our potato peeler leads to minimum peel loss and for better peeling and continuous flow of water in the drum helps to carry away the waste from drainage pipe. The drum storage capacity 6 to 8 kg. Potatoes. The technical specifications of our peelers are:

Capacity : 100 - 150 kg/h Motor : 0.5 Hp motor 415 volt Dimension : 900mm x 500mm x 1000 mm Weight : 60 kg PotatoSlicer

Use for slicing the potato, with the help of cutting plate, provided with the machine, there are different types of plate, named as sally plate (useful for sticks chips)and raffle plate which is use for cutting potato in different shapes and design . All plates have adjustable blade. our machine avoids the deposition of broken pieces in the dye. It is hand press type potato slicer.

Capacity : 100 - 150 kg/h Motor : 0.5 Hp motor 415 volt Dimension : 590mm x 460mm x 1150 mm Weight : 65 kg Potato Drying machine

After the washing of sliced potato into water the excess surface water is removed in dryer machine which is centrifugal system and removes approximately 30% to 40% of water enabling the potato to fry properly machine. Contains S.S.basket with storing capacity is 8 to 10 Kg sliced

potatoes Capacity : 100 - 150 kg/h Motor : 0.5 Hp motor 415 volt Dimension : 1100mm x 810mm x 790 mm Weight : 80 kg

Page 1 cont…..

Potato chips fryer Machine It is circular batch fryer provided with diesel or kerosene operated burner which is insulated with ceramic blanket glass wool, refractory lining Outer body fabricated in stainless steel body , These enhancements mean that the manufacturing process becomes far more economical, environment friendly ,fully safe ,easy to operate. This system is ideally suited for

Potato Chips, Banana Chips and other low bulk density products like namkeens (salt snacks) Indian sweets, This system is available in different sizes depending upon the production capacity. Capacity : 25 to 50 kg/h Dimension : 800mm x 800mm x 500 mm Weight : 350 kg Note: We have different models and sizes available in fryers with Indian tradition and imported automatic burner.

OIL separator machine (optional) After deep oil frying sliced potato extra oil is remove in this machine which is centrifugal system

same as water separator only different is it runs in slow speed with different size of basket inside and removes approximately 30% oil which keep chips more fresh and tasty . Capacity : 100 - 150 kg/h Motor : 0.5 Hp motor 415 volt Dimension : 1100mm x 810mm x 790 mm Weight : 80 kg

Flavoring Machine(optional)

We manufacture batch type chips flavouring machine with stainless steel, which is food processing equipment used for adding various spices to fried chips in batches. This technically accurate machine is easy to install and requires less maintenance. Capacity : 100 kg/h Motor :1hp Dimension : 1500mm x 1000mm x 2000 mm Weight : 150 kg

Bend sealer (packing machine) (optional) It is continuous type band sealer with nitrogen flushing,

Power 230 volt, standard model, load 300 w Heater temperature controller 0 to 300 c . Its a tabletop machine require manpower for filling potato chips in PP pouch. Capacity : 50 kg/h Dimension : 1100mm x 810mm x 790 mm Weight : 35 kg

Page 2 cont…..

Utensil and Other Accessiores contains: Optional

1) Set of Alluminium vessel. 2) Colenders ,Big spoon for removing fryed chips. 3) Weighing scale 20 kg capacity . 4) Extra spare parts of machine (blades,rubber part,tools) 5) Temperatuer indicator.

Flow Chart of Manufacturing Potato crisp.

Potato (Raw Material)

1.15SG Fresh Potatoes, Weight is about from 150g to 250g, Sugar density less

than 1%. ↓

Your own storage place.

Storing the potatoes

Fresh potatoes will keep longest when stored in a cool, dry, dark area with good ventilation. Ideally, storage areas should

range between 5-10° C.

↓ Send potatoes into production

line. Control the feeding speed and the quality of potato.

Washing potato manual Rough Washing Wash away the dust on the potatoes ↓ Send cleaned potatoes into peeler by fix-

quantity. Peeler Peeling Peel the skin of the potato.

↓ Inspection Check the quality of peeled potato in the

container by workers. ↓

Slicing Adjust the sliced thickness of hand push

machine Slice. The available thickness is from 1.2mm to 2.0mm

↓ By warm water. Washing of the Starch Wash potato chips by warm water. In

order to prevent dark fried potato chip. ↓ Water Draining in

dewatering machine Draining the water in the potato chips in

order to promote the frying quality. ↓ Frying Fry potato chips by manual Continued

Type Oil Fryer. India style fryer. ↓ Oil draining and

Cooling In SS tray

↓ Seasoning Sprinkle seasoning flour evenly manually. ↓

Computerized Weighing Packing M/C or semi-Auto packing machine

Packing

Depend on buyer’s requirement of packing quality.

↓ Selling to the market

Page 3 cont…..

Quotation List------------------------05th, April, 2010 Dear Sir, Potato Chips Plant Thank you for your interesting in our production line. I am pleasure to provide quotation as fellow. If you have any questions, please don’t hesitate to contact me.

Machine Name Quantity (set)

Price INR

Peeler 1 26,000Slicer with 1 26,000Ruffle disc extra 1 5,000Drying 1 26,000Traditional Circular batch Fryer Diesel operated with motor blower 1hp, pipes and fitting accessories. Build with building material on site.

1 27,000

Total price Ex works

1,10,000

SS Circular batch Fryer (optional) Diesel operated with 36” aluminum pan

1 55,000

TECHNICAL PARAMETERS & RELEVANT SERVICES

1. Output per machine: 100Kg/hr.Per shift production capacity 400 to 500kg. 2. Connecting Material use Stainless steel 304. 3. Motor Voltage / Frequency (3 phase): 415V / 50Hz 4. Workers Required: 3-4 Workers 5. Warranty: At least 1 year from the date of completion of the commissioning. 6. Installation and commissioning extra. 7. Payment term 75% advance, 25% during delivery 8. Delivery periods 3 to 4 weeks. 9. Packing and transportation extra. 10. Quotation does not include frying pan and utensil. 11. Above Quotation Valid for 30 days only.

You’re faithfully, Blaze Machinery

Page 4 cont…..

Frequently asked question? Q.What type of potato use for chips? A. Potatoes for chips specially grown, bigger in size, it should not sweet in taste. Q.What is the ratio (wastage)? A. The ratio is 1/3rd for eg-100 kg of potato gives around 32 kg of ready chips. Q.How much temperature required for fry potato? A.195 degree Q.How much time requires for frying sliced potato? A. If you take 10 kg of sliced potato it takes around 4min to fry. Q.How much palm oil require while frying? A.300 Gms per kg. Q.How much diesel uses? A.350 Gms per kg. Q.Why does a potato change colour? A. If potatoes are exposing to air much, or extra frying is done it changes colour.