Upload
natarajan2006
View
212
Download
0
Embed Size (px)
Citation preview
8/7/2019 Indoor Sensor Mat_specsheet
1/2
Specification Sheet Fiber Defender
Indoor Sensor Mat
The worldwide increase in acts of terrorismcalls for enhanced security in and aroundmass-transit stations and platforms and otherpotential targets such as governmentinstallations. Vandalism, trespass, and evencarelessness can also pose threats to peopleand resources.
A revolutionary tool to combat threats is now
available in the form of a floor-based sensorsystem, the Fiber Defender Indoor Sensor Mat. Sophisticated yetsimple, the Indoor Sensor Mat uses fiber optics to detect thepresence of unauthorized personnel or objects left in such restrictedareas as the platform of a mass-transit station, as well as the trackbed. The Indoor Sensor Mat has many deployments, includingbanks, museums, chemical depots, and moreanywhere protectingpublic safety and/or resources is a concern.
The fiber-optic mat is an integrated unit, combining sensor cablewith durable flooring material, making it easy to install and maintain.The Fiber Defender Indoor Sensor Mat utilizes components that
meet the stringent guidelines established by the NFPA and ASTM.
Comprehensive tuning and calibration parameters filter out train andpedestrian noise and other potential nuisance alarms, whilemaintaining the sensitivity to identify any potential threat ofsabotage, vandalism, or a misstep into a protected area.
Remote operation Commercial Transit stationsCentrally located electronics Government Subways
Indoor/outdoor capabilities Military MuseumsSuperb sensitivity adjustment capabilityFire Marshall approved mat material
Chemical depotsCampuses
BanksMovie setsCourt housesAmusement parksTunnelsEmbassies
Description
Features Applications Deployments
8/7/2019 Indoor Sensor Mat_specsheet
2/2
Materials: Plenum-rated insensitive cable, IC-5D, with FC connectors
Plenum rated sensing cable, SC-5, with FC connectors
Mat can be pieced up to 100 m (328 ft) in 9 m or 5 m (10 or 5 yard) increments in length per zone
Works with the Fiber Defender Models 208R and 34X series Alarm Processing Units
Operating Temperature Range: -40C to 70C Humidity: 95% non-condensing
Certifications and Ratings Sensor mat minimum flame spread exceeds standards for mass transit and light rail industries - FMVSS 302
Specific Optical Density of Smoke Generated by Solid Materials - ASTM E662
Surface Flammability of Materials Using a Radiant Heat Energy Source - ASTM E162
Fixed Guideway Transit and Passenger Rail System - NFPA 130
Flame Travel and Smoke of Wires and Cables for Use in Air-Handling - ANSI/NFPA 262
Meets ADA guidelines
For optimum system performance, Fiber SenSys recommends tuning the Indoor Sensor Mat with SpectraView
Test Name Test Method Typical ValuesTensile Strength ASTM D412 800 PSI
Elongation ASTM D142 100%
Hardiness ASTM 2240 90 5 Shore A
Tear Strength ASTM D624 (Die C) 120 pounds per inch
Compression Set ASTM D395 (22hrs @ 25 C) 8 %
Flexibility ASTM F137, 1 mandrel No breaks or cracks
Dimensional Stability ASTM F2199 (70hrs @ 82 C) 0.1%
Impact Sound Transmission ASTM E392 - 73t Impact Noise Rating 18Impact Insulation Class 33
Color Depth Visual Homogeneous
Flame Spread FMVSS 302 Did not ignite/ self extinguishing
Critical Radiant Flux ASTM #648 >/-0.5 watts/cm2
Moisture Absorption ASTM D471 0.1% by weight (72 hours @ 70 F)
Fungus Resistance MIL-1-631D Completely resistant
Up to 100 meters per zone of protection can be covered by the Fiber Defender Indoor Sensor Mat. Sectionsmay be ordered in 9-meter (30 ft) increments, with short sections ordered to the nearest 5 meters (16 ft)measurement. Each section of indoor mat is .6 meters (2 ft) wide. The outdoor mat starts at .3 meters (1 ft), andcan be ordered incrementally by .3 meters (1ft, 2ft, 3ft, etc). The Fiber Defender Indoor Sensor Mat comes pre-assembled and can be ordered with either the FD-208R Alarm Processing Unit, used for installations requiringmore than two zones of coverage, or the FD-34X series Alarm Processing Unit, which satisfies requirements for
one to two zones of coverage. Contact your sales representative for pricing and ordering information.
2925 NW Aloclek Drive, Suite 130 Hillsboro, OR USA 97124 Phone: +1-503-692-4430 Fax: +1-503-692-4410www.fibersensys.com
Ordering Information
Product Specifications
Physical Properties