IGS-20040MT

Industrial 16-Port 10/100/1000T + 4-Port 100/1000X

SFP Managed Switch (-40~75 degrees C)

2 / 41

Product Overview

Product Benefits

Product Features

Applications

Appendix

Presentation Outlines

3 / 41

Product Overview

Modes of Application

Factory Building

Transportation

4 / 41

Product Overview

Hardened Environments, Wide Operating Temperature

IGS-20040MT

5 / 41

Product Overview

PLANET Industrial Product Classification

Control Level

Device Level

Information Level

IGS-20040MT

Full Ports Gigabit

Managed Ethernet Switch

Unmanaged Ethernet Switch

Media Converter

6 / 41

Product Overview

The Layer 2/2+ Managed Industrial Ethernet Switch Family

Fast

Eth

ern

et

Gig

ab

it

Eth

ern

et

19” Rack Mount DIN-Rail

PoE

Non-PoE

IGSW-2840 24TP + 4G TPSFP -20~75 degrees C

IGSW-24040T 24TP w/ 4 SFP

-40~75 degrees C

IGS-10020MT 8G TP

+ 2 100/1000X SFP (-40~75 degrees C)

IGS-801M 8G TP

-10~60 degrees C

ISW-1022MT 8TP

+ 2G TP/SFP (-40~75 degrees C)

ISW-1022MPT 8TP PoE

+ 2G TP/SFP (-40~75 degrees C)

IGS-10080MFT 8 100/1000X SFP

+ 2G TP -40~75 degrees C

IGS-10020HPT 8GTP PoE+

+ 2 SFP (-40~75 degrees C)

ISW-514PTF 4TP PoE

+ 1 100X SFP (-10~60 degrees C)

ISW-504PS 4TP PoE + 1 TP

(-10~60 degrees C)

IGS-20040MT 16G TP

+ 4 100/1000 SFP -40~75 degrees C

IGS-10020PT 8GTP PoE + 2 SFP

(-40~75 degrees C)

IGS-20040MT 16G TP

+ 4-Port 100/1000 SFP

-40~75 degrees C

7 / 41

Product Overview

Front Panel of IGS-20040MT 1 6-pin Removable Terminal Block /

Redundant 12~48V DC power

input, 24V AC power input

Digital Input and Digital Output 2

1 x RS232 Console Port 5

16 x 10/100/1000Base-T

Ethernet Port

6

Reset Button 3 Power 1, Power 2, Fault, Ring

& Ring Owner LED 4

4 x 100/1000 SFP Slot 7

IP30 Aluminum Case 8

Product Overview

Top View of IGS-20040MT

B Pin Removable Terminal Block /

Redundant 48V DC Power Input

A Pin Removable Terminal Block /

Digital Input / Digital Output Interface

1 Digital Input Pin

2 Digital Output Pin

3 DI/DO Grounding Pin

4 48V DC Power 2 Input Pin

5 Fault Alarm Pin

6 48V DC Power 1 Input Pin

7 Case Grounding

8 / 41

9 / 41

Product Overview

Mechanical Drawing

Wall Mount Plates

DIN-Rail Kit

Unit: mm

10 / 41

Product Overview - Comparison

Compared with PLANET Industrial Switch

152 x 107 x 72mm

16 x 10/100/1000Mbps 4 x 100/1000Base-X Copper + SFP

Dimensions

Switch Fabric

DI/DO

IEEE 1588

IGS-20040MT

40Gbps

152 x 107 x 72mm

20Gbps

2 x 10/100/1000Mbps 8 x 100/1000Base-X

None

None

Supported

Supported

440 x 200 x 44.5mm

48Gbps

24 x 10/100/1000Mbps w/ 4 x 100/1000Base-X

None

None

11 / 41

Industrial Conformance

The smallest 20-port Gigabit Managed Switch in the industrial networking industry

12~48V DC, 24V AC redundant power

-40 to 75 degrees C operating temperature

IP30 aluminum case protection

Cost-effective IPv6 Industrial Backbone Switch

40Gbps High-Performance switching fabric

IPv4 / IPv6 Dual Stack helps to connect to IPv6 network now and in the future

Full / Secure Management

SSH, SSL and SNMPv3 protocols ensure security management

SNMP, RMON and Trap alarm for Centralized Network Management

Product Benefits

12 / 41

Key Features

20-Port Gigabit

DI/DO

100/1000X SFP

IP30 Aluminum

Case

IPv4/IPv6 Management

-40~75°C

Operating

Temp.

Layer 3 Static Routing

12~48V DC or 24V AC

Input IGS-20040MT

13 / 41

Product Features

Hardware

16-port 10/100/1000BASE-T RJ45 interfaces, auto MDI / MDIX

4 SFP slots, flexible for Fiber-Optic network extension

• SFP type, plug and play

• 1000BASE-SX/LX: Maximum 120 kilometres

• 100BASE-FX compatible, up to 60 kilometres

9K bytes jumbo frame

40Gbps switch fabric

IP30 aluminum case

DIN-rail and wall-mount design

12V ~ 48V DC or 24V AC redundant power input

-40 ~ 75 degrees C operating temperature

RJ45 to DB9 RS-232 console port for local management and maintenance

14 / 41

Product Features

Wide-ranging Redundant Power Design

PWR1 and PWR2 12~48V DC or 24V AC redundant power input

1A@24V relay alarm for power down and port down

Power polarity reverse protection

Connective, removable terminal block for primary and backup power

Product Features – Fault Alarm

The IGS-20040MT supports a Fault Alarm feature which can alert the users when

there is something wrong with the switches. With this ideal feature, the users

would not have to waste time to find where the problem is. It will help to save time

and human resource.

15 / 41

Product Features – DI & DO

Digital Input Configuration

Digital Output Configuration

16 / 41

Product Feature -- Digital Input

Digital Input offers detection of environment device status via sensing login signal from

high to low or from low to high, and then system is going to log message to local,

remote log server, or alarm message via SNMP trap or SMTP with customized error

message.

Digital Input

Security OK Alarm Warning

17 / 41

Reed Switch

Product Feature -- Digital Output

Digital Output offers detection of IGS-20040MT port failure or power

failure, and then output logic signal of High/Low to trigger the

performance of the external device.

Digital Output

DC Power Failure

Trigger Alarm

Port Failure

Trigger Alarm

18 / 41

Product Feature – E.R.P.S

Redundant Ring, Fast Recovery for Critical Network Applications

The IGS-20040MT incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection

Switching) technology and redundant power input system into customer’s industrial automation

network to enhance system reliability and uptime in harsh factory environments.

19 / 41

Product Feature – IEEE 1588

1588 Time Protocol for Industrial Computing Networks

The IGS-20040MT is intended for Telecom and Carrier Ethernet applications, supporting MEF

service delivery and timing over packet solutions for IEEE 1588 and Synchronous Ethernet.

PTP Transparent Configuration

Device type = e2eTransp

2 Step Flag = False (for single step mode)

One way = False (for both Sync and delay messages so frequency and phase can be calculated)

Protocol = Ethernet (for PTP over layer 2)

Now can choose any port from Master Grand and any port to Slave.

Then the TC node will forward all PTP frames received on one port to the

other and update the correction field in the PTP frames.

PTP

PTP PTP PTP

20 / 41

Product Features – Dual-speed SFP

IGS-20040MT Fiber Connection

MFB-Series

MGB-Series

Dual-speed SFP

1000BASE-SX / LX / BX

SFP Transceiver

100BASE-FX / BX

SFP Transceiver

21 / 41

Product Features – DDM

22 / 41

23 / 41

Product Features

Full Management

IPv4 / IPv6 dual stack

IPv6 IP address / NTP / DNS management

Standard-based management

• Web-based

• Telnet

• Console

• SNMP v1, v2c, v3

Security Authentication for secure management

• SSH

• SSL

• SNMPv3

SNMP RMON 1, 2, 3, 9 for in/out network traffic and event monitoring

SNMP trap for device Linkup / Linkdown status monitoring

User Privilege levels control

24 / 41

Product Features

Supports VLANs

IEEE 802.1Q tagged VLAN

Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

Private VLAN edge (PVE)

Protocol-based VLAN

MAC-based VLAN

Voice VLAN

Supports Spanning Tree Protocol

STP, IEEE 802.1D (Spanning Tree Protocol)

RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)

MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN

BPDU Guard and BPDU Filtering enhance switch network reliability, manageability,

and security.

25 / 41

Product Features

Quality of Service

8 priority queues on all switch ports

Traffic Classification by:

• 802.1p CoS

• IP DSCP/Precedence of IPv4 / IPv6 packets

• IP TCP/UDP port number

• Typical network applications

Ingress Shaper and Egress Rate Limit per port bandwidth control

Strict priority and Weighted Round Robin (WRR) CoS policy

Traffic-policing policies on the switch port

DSCP Remarking

26 / 41

Product Features

Multicast

Supports IGMP Snooping v1, v2 and v3

Support MLD Snooping v1 and v2

Querier mode support

IGMP Snooping filtering

MLD Snooping filtering

MVR (Multicast VLAN Registration)

Supports Link Aggregation

IEEE 802.3ad Link Aggregation Control Protocol (LACP)

Cisco ether-channel (static trunk)

Up to 40Gbps bandwidth (duplex mode)

27 / 41

Product Features

Security

Network Access Authentication Mechanism

• IEEE 802.1x Port-based authentication for user identity control

• MAC-based authentication for easy deployment

• RADIUS / TACACS+ / local profile

Access Control List (ACL)

• IP-based filtering to permit or deny traffic

• MAC-based filtering to permit or deny traffic

Management Source MAC / IP address binding to prevent unauthorized intruder

28 / 41

Product Features

Enhanced Security

DHCP Snooping to filter un-trusted DHCP messages

Dynamic ARP Inspection

• Discards ARP packets with invalid MAC address to IP address binding.

• Protects the network from certain "man-in-the-middle" attacks.

IP Source Guard

• Helps prevent IP spoofing attacks when a host tries to spoof and use the IP

address of another host.

• Any IP traffic with a source IP address other than that assigned will be filtered out.

Auto DoS rule to defend DoS attack

29 / 41

Product Features

Management Tools

IPv6 IP address / NTP / DNS management

Built-in Trivial File Transfer Protocol (TFTP) client

DHCP for IP address assignment

Auto-configuration for IPv6 address assignment

Firmware upload/download via HTTP / TFTP

NTP (Network Time Protocol)

Link Layer Discovery Protocol (LLDP) Protocol

Universal Plug and Play (uPnP)

PLANET Smart Discovery Utility for management deployment

30 / 41

Applications – Industrial Backbone Switch

120KM maximum fiber optic

cable length supported.

Work in conjunction with media

converter for more applications.

Redundant connection for data

recovery automatically.

31 / 41

Security Building Automation Switch

The IGS-20040MT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) and

Port Security for enforcing security to the edge.

It can be used to restrict network access by denying packets based on source and destination

IP address, TCP/UDP ports or defined typical network applications.

Applications

32 / 41

Applications

33 / 41

Comparison Table

34 / 41

Comparison Table

35 / 41

Comparison Table

36 / 41

Comparison Table

37 / 41

Appendix Sales Target

Target Markets

IE Distributor

Factory

System Integrator

Tender Market (Public Construction)

Transportation, Hospital, Bank, etc.

Profitable Products The following IE switches and IE media converters are potential to

all customers:

• IGS-10020MT

• IGSW-24040T

• IGS-10020PT/HPT

• IGS-10080MFT

• IGT-1205AT / IGT-90x / IGTP-80x

Appendix

Available Gigabit Ethernet Fiber Optic SFP Modules:

38 / 41

Appendix

Available Gigabit Ethernet WDM Fiber Optic SFP Modules:

39 / 41

Appendix

Available Fast Ethernet Fiber Optic SFP Modules:

40 / 41

41 / 41

Available DIN-Rail Power Supplies:

PWR-40-24 40W 24V DC Industrial DIN Rail Power Supply

PWR-60-24 60W 24V DC Industrial DIN Rail Power Supply

PWR-75-24 75W 24V DC Industrial DIN Rail Power Supply

PWR-120-48 120W 48V DC Industrial DIN Rail Power Supply

PWR-240-48 240W 48V DC Industrial DIN Rail Power Supply

Appendix

42 / 41