Industrial Cables

TM

© Copyright Eltech Industries - 2012

This publication is copyright. Other than for the purposes of and subject to the conditions prescribed under the copyright act, no part of it may in any form or by any means be reproduced, stored in a retrieval system or transmitted without prior written permission of Eltech Industries.

While every effort has been made to ensure the accuracy of the information herein, Eltech Industries accepts no liability for any loss or damage, either direct or consequential, arising out of, or in relation to, the use or application of the said information or products referred to herein.

All information, specifi cations and prices are subject to change without any prior notice. All prices quoted exclude GST and delivery.

Photographs and images are for illustrative purposes only and may vary from products depicted.

Information correct at time of publication.

Brand and product names are trademarks or registered trademarks of their respective holders.

Specialised Cable Solutions

TM

About us

ContentsLow Voltage CablesPanel Flex V90HT 0.6/1kV ..........................................................6

SDI Flexible R-E-110 0.6/1kV ....................................................6

SDI Flexible R-E-110 1.9 /3.3kV ...............................................7

Fire Rated SDI Flexible 0.6/1kV .................................................7

Multicore Flexible Control Unscreened 300/500V V75 ........8-9

Multicore Flexible Control Screened 300/500V V75 .............. 10

Multicore Flexible Power Screened 0.6/1kV V75 .................. 11

Multicore Flexible Power H07RN-F Rubber 0.6/1kV ............. 12

Instrument Cable Multipair O/A Screened V90HT ................. 13

Instrument Cable Multipair Ind. & O/A Screened V90HT ...... 14

Instrument Cable Multipair O/A Screened V90HT SWA ....... 14

Power & Control Cable Double Brass Tape Screened .......... 15

Control Cable Copper Tape Screened ................................... 16

Medium Voltage CablesMedium Voltage Cables Single Core PVC Sheath ...........18-19

Medium Voltage Cables Single Core HDPE Sheath ............. 20

Medium Voltage Cables 3 Core PVC Sheath ...................21-22

Medium Voltage Cables 3 Core HDPE Sheath .................23-24

Medium Voltage Cables 3 Core Steel Wire Armour .........25-26

Medium Voltage Cables 3 Core Nylon Sheath ...................... 27

Cable Specifi cations .................................................30-38

Eltech Industries is pleased to announce the release of the Deltafl ex™ Infrastructure Cable product range to Australia’s industrial and construction industry sectors.

Tapping into the vast resource of experience and knowledge that our global cable suppliers can offer us, Eltech Industries is confi dent that the Deltafl ex™ range of high quality cables easily meets the demanding requirements and standards that these industries offer.

Eltech Industries and its suppliers specialize in designing and manufacturing customized cable solutions to stringent requirements and specifi cations as stipulated by its clients. With very low minimum order quantities applicable, the Deltafl ex™ Cables range is an ideal choice for your cable requirements.

Eltech Industries is a company dedicated to a commitment of product quality and the Deltafl ex™ Cables range is no exception to this committal. Not a stone is left unturned to ensure premium quality is maintained and all cables are put through thorough and exhaustive testing cycles during design and manufacture. That’s why Eltech Industries can guarantee long life spans with its Deltafl ex™ Cables products, no matter how harsh the application or environment.

Knowledge

Diversity

Conformity

Flexibility

Support

Free Call 1800 007 458

www.eltechindustries.com.au

Section 1Low Voltage CablesTM

Low

Vol

tage

Cab

les

Freecall: 1800 007 458 Fax: 1300 885 122 Web: www.eltechindustries.com.au6

Low Voltage CablesSection 1

TM

Part No. Nom Area mm²

Stranding No./mm

Cable O/D mm

Approx Weight Kg/km

Current Rating Amps

VX006-110 6 176/0.20 7.8 88 57

VX010-110 10 194/0.20 8.7 128 80

VX016-110 16 470/0.20 10.2 181 104

VX025-110 25 726/0.20 11.9 266 139

VX035-110 35 1040/0.20 13.2 364 171

VX050-110 50 1499/0..20 15.0 510 216

VX070-110 70 2165/0.20 17.2 722 272

VX095-110 95 2745/0.20 19.4 904 327

VX120-110 120 1544/0.30 21.7 1,146 388

VX150-110 150 1961/0.30 23.7 1,424 448

VX185-110 185 2331/0.30 25.9 1,679 513

VX240-110 240 3172/0.30 29.1 2,275 617

VX300-110 300 3965/0.30 33.8 2,828 711

VX400-110 400 5246/0.30 35.4 3,680 851

SDI FLEXIBLE R-E-110 0.6/1kV

Conductor:Annealed Copper Class 6 stranding

Sheath: Cross-linked Elastomer E-110-R

Insulation: Cross-linked Elastomer R-E-110

dd


Stranding No./mm

Cable O/D mm

Approx Weight Kg/km

Current Rating Amps

EVK11602 0.5 16/0.20 2.2 11 -

EVK12402 0.75 24/0.20 2.4 14 -

EVK13202 1 32/0.20 2.8 18 22

EVK130025 1.5 30/0.25 3.0 22 28

EVK150025 2.5 50/0.25 3.7 35 36

EVK15603 4 56/0.30 4.5 53 50

EVK18403 6 84/0.30 5.4 73 63

BD132202 10 322/0.20 6.4 114 88

BD151102 16 511/0.20 7.5 171 117

BD179202 25 792/0.20 9.3 300 156

BD1112102 35 1121/0.20 10.5 375 195

BD1159602 50 1596/0.20 12.6 510 245

BD1221202 70 2212/0.20 14.4 725 311

BD1302102 95 3021/0.20 16.5 970 375

BD1167203 120 1672/0.30 17.9 1225 447

PANEL FLEX V90HT 0.6/1kV

Class 6 Flexible Conductor

V-90HT Insulationon

Low

Vol

tage

Cab

les

7


Stranding No./mm

Cable O/D mm

Approx Weight Kg/km

Current Rating Amps

EHV10 10 80/0.40 10 180 99

EHV16 16 126/0.40 11 250 130

EHV25 25 196/0.40 13 350 175

EHV35 35 276/0.40 14 455 220

EHV50 50 396/0.40 15.5 610 265

EHV70 70 540/0.40 17 805 340

EHV95 95 715/0.40 19.5 1055 420

EHV120 120 920/0.40 21.5 1350 490

EHV150 150 1138/0.40 23 1655 570

EHV185 185 1390/0.40 25 1975 660

EHV240 240 1837/0.40 28 2550 790

EHV300 300 2275/0.40 32.5 3230 910

EHV400 400 3035/0.40 37.7 4222 1070

SDI FLEXIBLE R-E-110 1.9/3.3kV

Class 5 Flexible ConductorR-E-110

Insulation

Sheath: CPE Rubber Compound

Section 1

Low Voltage CablesTM


Stranding No./mm

Cable O/D mm

Approx Weight Kg/km

Current Rating Amps

FXR010-110 10 194/0.20 9.2 145 80

FXR016-110 16 470/0.20 10.2 208 104

FXR025-110 25 726/0.20 12.2 310 139

FXR035-110 35 1040/0.20 13.4 405 171

FXR050-110 50 1499/0.20 15.1 560 216

FXR070-110 70 2165/0.20 16.9 750 272

FXR095-110 95 2745/0.20 19.1 995 327

FXR0120-110 120 1544/0.30 21 1245 388

FXR0150-110 150 1961/0.30 23.4 1550 448

FXR0185-110 185 2331/0.30 25.8 1875 513

FXR0240-110 240 3172/0.30 28.6 2390 617

FXR0300-110 300 3965/0.30 31.7 3055 711

FXR0400-110 400 5246/0.30 35.4 3890 851

FIRE RATED FLEXIBLE 110°C 0.6/1kV XHF-110 LSHF

Class 6 Flexible Conductor

XHF-110 Insulation

Mica Glass Tape Flame Barrier

HFS-110-TP Sheath

Freecall: 1800 007 458 Fax: 1300 885 122 Web: www.eltechindustries.com.au

Low

Vol

tage

Cab

les

8

Part No. No. of Cores Nom Areamm2

StrandingNo./mm

Nom O/Dmm

Approx. WeightKg/km

CC002NE 2 Core No Earth 0.5 16/0.20 4.8 35


CC003NE 2 Core + Earth 0.5 16/0.20 5.1 42


CC004 3 Core + Earth 0.5 16/0.20 7 54

CC005 4 Core + Earth 0.5 16/0.20 6.2 63

CC007 6 Core + Earth 0.5 16/0.20 6.7 81

CC012 11 Core + Earth 0.5 16/0.20 8.9 131

CC018 17 Core + Earth 0.5 16/0.20 10.5 188

CC025 24 Core + Earth 0.5 16/0.20 12.4 261

CC030 29 Core + Earth 0.5 16/0.20 13.3 304

CC040 39 Core + Earth 0.5 16/0.20 15.4 400


CC103 2 Core + Earth 0.75 24/0.20 5.7 55


CC104 3 Core + Earth 0.75 24/0.20 6.2 66


CC105 4 Core + Earth 0.75 24/0.20 6.7 79

CC107 6 Core + Earth 0.75 24/0.20 7.3 101

CC112 11 Core + Earth 0.75 24/0.20 9.9 171

CC118 17 Core + Earth 0.75 24/0.20 11.7 244

CC125 24 Core + Earth 0.75 24/0.20 13.8 337

CC134 33 Core + Earth 0.75 24/0.20 15.1 448

CC141 40 Core + Earth 0.75 24/0.20 16 538

CC150 49 Core + Earth 0.75 24/0.20 18.1 648

CC202NE 2 Core No Earth 1 32/0.20 5.3 53


CC203 2 Core + Earth 1 32/0.20 5.6 65


CC204 3 Core + Earth 1 32/0.20 6.5 79

CC205 4 Core + Earth 1 32/0.20 7.1 94

CC207 6 Core + Earth 1 32/0.20 7.5 126

CC212 11 Core + Earth 1 32/0.20 10.5 205

CC218 17 Core + Earth 1 32/0.20 11.7 300

CC225 24 Core + Earth 1 32/0.20 14.7 408

CC236 33 Core + Earth 1 32/0.20 17.4 578

CC241 40 Core + Earth 1 32/0.20 17.7 661

CC250 49 Core + Earth 1 32/0.20 19.1 797

MULTICORE CONTROL CABLESUNSCREENED 300/500V V75

Continued Next Page

Core Insulation:PVC V75

Earth (Green/Yellow) Core

Conductor:Annealed Copper Class 5 Stranding

Sheath:PVC V75


TM

TM

ulation:ulation:


Low

Vol

tage

Cab

les

9


StrandingNo./mm

Nom O/Dmm

Approx. WeightKg/km


CC303 2 Core + Earth 1.5 30/0.25 6.7 84


CC304 3 Core + Earth 1.5 30/0.25 7.2 104

CC305 4 Core + Earth 1.5 30/0.25 8.1 128

CC307 6 Core + Earth 1.5 30/0.25 8.9 166

CC312 11 Core + Earth 1.5 30/0.25 12 279

CC318 17 Core + Earth 1.5 30/0.25 13.7 407

CC325 24 Core + Earth 1.5 30/0.25 16.9 560

CC334 33 Core + Earth 1.5 30/0.25 19.4 746

CC350 49 Core + Earth 1.5 30/0.25 23.5 1089


CC403 2 Core + Earth 2.5 50/0.25 8.1 132

CC404 3 Core + Earth 2.5 50/0.25 8.9 163

CC405 4 Core + Earth 2.5 50/0.25 10 200

CC407 6 Core + Earth 2.5 50/0.25 10.1 267

CC412 11 Core + Earth 2.5 50/0.25 13.9 445

CC418 17 Core + Earth 2.5 50/0.25 17.1 648

CC425 24 Core + Earth 2.5 50/0.25 20.8 890

Section 1




TM

Low

Vol

tage

Cab

les

10


StrandingNo./mm

Nom O/Dmm

Approx. WeightKg/km

130003 2 Core + Earth 0.5 16/0.20 7.2 83

130004 3 Core + Earth 0.5 16/0.20 7.8 94

130005 4 Core + Earth 0.5 16/0.20 8.3 108

130007 6 Core + Earth 0.5 16/0.20 9.5 136

130012 11 Core + Earth 0.5 16/0.20 11.3 195

130025 24 Core + Earth 0.5 16/0.20 15.2 384

130103 2 Core + Earth 0.75 24/0.20 7.8 98

130104 3 Core + Earth 0.75 24/0.20 7.8 113

130105 4 Core + Earth 0.75 24/0.20 9.1 130

130107 6 Core + Earth 0.75 24/0.20 10.4 184

130112 11 Core + Earth 0.75 24/0.20 12.5 292

130118 17 Core + Earth 0.75 24/0.20 14.2 393

130203 2 Core + Earth 1.00 32/0.20 7.6 103

130204 3 Core + Earth 1.00 32/0.20 8.5 146

130205 4 Core + Earth 1.00 32/0.20 8.7 169

130207 6 Core + Earth 1.00 32/0.20 9.3 219

130212 11 Core + Earth 1.00 32/0.20 11.7 350

130218 17 Core + Earth 1.00 32/0.20 15.6 479

130225 24 Core + Earth 1.00 32/0.20 18.4 605

130303 2 Core + Earth 1.5 30/0.25 8.9 153

130304 3 Core + Earth 1.5 30/0.25 9.6 181

130305 4 Core + Earth 1.5 30/0.25 10.3 211

130307 6 Core + Earth 1.5 30/0.25 11.3 262

130312 11 Core + Earth 1.5 30/0.25 14.8 480

130325 24 Core + Earth 1.5 30/0.25 20.1 837

MULTICORE CONTROL CABLES SCREENED 300/500V

Tinned Copper Braid Screen

Class 5 Conductor

PVC Bedding

V-75 PVC Insulation

Sheath:4V-75 Clear PVC

TM

VC

Coppep r PVC BBPV


Section 1


Low

Vol

tage

Cab

les

11

Part No. No. of Cores Nom Area mm2

Power CoresNom Area mm2

Earth CoresNom O/D

mmApprox. Weight

Kg/km

131304 3 Core + Earth 1.5 1.5 13.5 270

131404 3 Core + Earth 2.5 2.5 14.5 330

131504 3 Core + Earth 4.0 4.0 16.5 400

131604 3 Core + Earth 6.0 6.0 18.5 660

131704 3 Core + 3 x Earth 10.0 1.5 23.5 876

131804 3 Core + 3 x Earth 16.0 2.5 24.6 1087

131904 3 Core + 3 x Earth 25.0 4.0 30.1 1734

1311004 3 Core + 3 x Earth 35.0 6.0 33.7 2260

1311104 3 Core + 3 x Earth 50.0 10.0 40 3210

1311204 3 Core + 3 x Earth 70.0 10.0 43.3 3948

1311304 3 Core + 3 x Earth 95.0 16.0 48.7 5126

1311404 3 Core + 3 x Earth 120.0 16.0 51.7 5925

MULTICORE POWER CABLESSCREENED 600/1000V

Insulation:PVC V-75

Tinned Copper Braid

Conductor:Annealed Copper Class 5 Stranding

SheathPVC 4V-75Transparent

TM

n:5

• Brass Nickle Plated • IP68 Ingress protection

• Ideal for EMC braided cables • Temperature range: -40°C to +100°C

BRASS EMC CABLE GLANDS - METRIC THREAD

Part No. Size Cable Range Qty

EMCG12 M12 3-6.5mm 1

EMCG16 M16 5-10mm 1

EMCG20 M20 6-12mm 1

EMCG25 M25 7.5-14mm 1

EMCG32 M32 10-18mm 1

EMCG40 M40 16-25mm 1

EMCG50 M50 22-32mm 1

EMCG63 M63 30-38mm 1

Lock Nuts not included



TM

Low

Vol

tage

Cab

les

12

MULTICORE FLEXIBLE RUBBER CABLES600/1000V


StrandingNo./mm

Nom O/Dmm

Approx. WeightKg/km

EHO3G1.5B 2 Core + Earth 1.5 30/0.25 10.1 158

EHO3G2.5B 2 Core + Earth 2.5 50/0.25 12.0 229

EHO3G4.0B 2 Core + Earth 4.0 56/0.30 13.9 327

EHO3G6.0B 2 Core + Earth 6.0 84/0.30 15.4 430

EHO3G10B 2 Core + Earth 10.0 80/0.40 20.8 748

EHO3G16B 2 Core + Earth 16.0 128/0.40 23.4 1036

EHO3G25B 2 Core + Earth 25.0 200/0.40 29.2 1962

EHO4G1.0B 3 Core + Earth 1.0 32/0.20 10.0 168

EHO4G1.5B 3 Core + Earth 1.5 30/0.25 11.1 209

EHO4G2.5B 3 Core + Earth 2.5 50/0.25 13.2 304

EHO4G4.0B 3 Core + Earth 4.0 56/0.30 15.3 435

EHO4G6.0B 3 Core + Earth 6.0 84/0.30 17.2 571

EHO4G10B 3 Core + Earth 10.0 80/0.40 22.7 982

EHO4G16B 3 Core + Earth 16.0 128/0.40 25.6 1367

EHO4G25B 3 Core + Earth 25.0 200/0.40 32.4 2012

EHO4G35B 3 Core + Earth 35.0 280/0.40 35.7 2706

EHO4G50B 3 Core + Earth 50.0 400/0.40 41.5 3737

EHO4G70B 3 Core + Earth 70.0 356/0.50 46.6 4919

EHO4G95B 3 Core + Earth 95.0 485/0.50 53.2 6535

EHO4G120B 3 Core + Earth 120.0 614/0.50 58.0 7969

EHO5G1.5B 4 Core + Earth 1.5 30/0.25 11.0 209

EHO5G2.5B 4 Core + Earth 2.5 50/0.25 12.3 262

EHO5G4.0B 4 Core + Earth 4.0 56/0.30 14.5 379

EHO5G6.0B 4 Core + Earth 6.0 84/0.30 17.1 545

EHO5G10B 4 Core + Earth 10.0 80/0.40 19.1 712

EHO5G16B 4 Core + Earth 16.0 128/0.40 25.0 1216

EHO5G25B 4 Core + Earth 25.0 200/0.40 28.3 1699

EHO7G1.5B 6 Core + Earth 1.5 30/0.25 13.6 373

EHO7G2.5B 6 Core + Earth 2.5 50/0.25 16.1 565

EHO12G1.5B 11 Core + Earth 1.5 30/0.25 18.1 606

EHO12G2.5B 11 Core + Earth 2.5 50/0.25 21.8 925

EHO18G1.5B 17 Core + Earth 1.5 30/0.25 21.2 850

EHO18G2.5B 17 Core + Earth 2.5 50/0.25 25.5 1295

Anneal Plain Copper – Class 5 Stranding

R-EP-90 Rubber Compound

Elastomer Rubber GP-85-PCP


Freecall 1800 728 866 Fax (02) 4260 7888 Email [email protected]

Section 1


Low

Vol

tage

Cab

les

13

Part No. No. of Pairs Nom Areamm2

StrandingNo./mm

Nom O/Dmm

Approx. WeightKg/km

ELT7301P 1 Pair 0.5 7/0.30 5.8 60

ELT7302P 2 Pair 0.5 7/0.30 7.7 86

ELT7303P 3 Pair 0.5 7/0.30 8.9 129

ELT7304P 4 Pair 0.5 7/0.30 9.8 160

ELT7306P 6 Pair 0.5 7/0.30 11.2 224

ELT7308P 8 Pair 0.5 7/0.30 13.6 270

ELT7310P 10 Pair 0.5 7/0.30 14.4 331

ELT7312P 12 Pair 0.5 7/0.30 15.8 391

ELT7316P 16 Pair 0.5 7/0.30 17.2 498

ELT7320P 20 Pair 0.5 7/0.30 19.0 605

ELT7324P 24 Pair 0.5 7/0.30 20.6 712

ELT7401P 1 Pair 0.88 7/0.40 6.3 82

ELT7402P 2 Pair 0.88 7/0.40 8.5 121

ELT7501P 1 Pair 1.5 7/0.50 7.0 104

ELT7502P 2 Pair 1.5 7/0.50 8.8 155

ELT7503P 3 Pair 1.5 7/0.50 10.6 218

ELT7504P 4 Pair 1.5 7/0.50 12.0 290

ELT7506P 6 Pair 1.5 7/0.50 14.6 408

ELT7508P 8 Pair 1.5 7/0.50 16.5 518

ELT7510P 10 Pair 1.5 7/0.50 18.4 628

ELT7512P 12 Pair 1.5 7/0.50 20.3 759

INSTRUMENTATION CABLES MULTIPAIR OVERALL SCREENED V90HT

PVC V-75

Annealed Plain CopperClass 2 Stranding

Aluminium Tape Screen, Polyester Mylar Tape

Tinned Copper Drain Wire 7/0.20

Sheath:PVC V90HTTT

55

r



TM

Low

Vol

tage

Cab

les

14 Freecall: 1800 007 458 Fax: 1300 885 122 Web: www.eltechindustries.com.au


StrandingNo./mm

Nom O/Dmm

Approx. WeightKg/km

EILT7302P 2 Pair 0.5 7/0.30 8.8 79

EILT7303P 3 Pair 0.5 7/0.30 10.3 98

EILT7304P 4 Pair 0.5 7/0.30 10.7 119

EILT7306P 6 Pair 0.5 7/0.30 12.3 161

EILT7308P 8 Pair 0.5 7/0.30 14.1 200

EILT7310P 10 Pair 0.5 7/0.30 15.4 255

EILT7502P 2 Pair 1.5 7/0.50 9.1 127

EILT7504P 4 Pair 1.5 7/0.50 12.2 211

EILT7506P 6 Pair 1.5 7/0.50 14.8 294

EILT7508P 8 Pair 1.5 7/0.50 16.7 382

EILT7510P 10 Pair 1.5 7/0.50 21.1 482

INSTRUMENTATION CABLES, MULTIPAIR IND. & O/A. SCREENED V90HT

PVC V-75

Annealed Plain Copper – Class 2 Stranding

Alum. Tape Screen, Polyester Mylar Tape + Tinned Copper Drain Wire 7/0.20

Alum. Tape Screen, Polyester Mylar Tape

Sheath:PVC V90HT

er r rr


StrandingNo./mm

Nom O/Dmm

Approx. WeightKg/km

ELT7301PSWA 1 Pair 0.5 7/030 10.9 198

ELT7302PSWA 2 Pair 0.5 7/030 12.9 246

ELT7304PSWA 4 Pair 0.5 7/030 14.2 304

ELT7306PSWA 6 Pair 0.5 7/030 15.7 361

ELT7308PSWA 8 Pair 0.5 7/030 17.1 430

ELT7310PSWA 10 Pair 0.5 7/030 18.9 535

ELT7312PSWA 12 Pair 0.5 7/030 19.9 571

ELT7501PSWA 1 Pair 1.5 7/050 12.1 239

ELT7502PSWA 2 Pair 1.5 7/050 15.0 333

ELT7504PSWA 4 Pair 1.5 7/050 16.9 455

ELT7506PSWA 6 Pair 1.5 7/050 19.5 623

ELT7508PSWA 8 Pair 1.5 7/050 21.1 730

ELT7510PSWA 10 Pair 1.5 7/050 24.3 941

ELT7512PSWA 12 Pair 1.5 7/050 25.3 1075

INSTRUMENTATION CABLES, MULTIPAIR O/A. SCREENED V90HT SWA

PVC V-75

Annealed Plain CopperClass 2 Stranding

Aluminium Tape Screen, Polyester Mylar Tape

Galvanised Steel Wire Armour

Tinned Copper Drain Wire 7/0.20

Sheath:PVC V90HT

errrrrr

WWWWWWWWWW

Also available in blue outer sheath

Freecall 1800 728 866 Fax (02) 4260 7888 Email [email protected]

Section 1


Low

Vol

tage

Cab

les

15

POWER CABLE DOUBLE BRASS TAPE SCREENEDCOPPER CONDUCTOR, PVC/PVC

5V-90 PVC Sheath

Double Brass Tape Screen

Class 2 Conductor

V-90 PVC Insulation


Part No. Number ofCores

Nom Areamm2

StrandingNo./Dia mm

Cable O/Dmm

DBT-4X4 4 4 7/0.85 17

DBT-4X6 4 6 7/1.04 19

DBT-4X10 4 10 7/1.35 21

DBT-4X16 4 16 7/1.70 23

DBT-4X25 4 25 19/1.35 26

DBT-4X35 4 35 19/1.53 29

DBT-4X50 4 50 19/1.78 33

DBT-4X70 4 70 19/2.14 38

DBT-4X95 4 95 37/1.78

DBT-4X120 4 120 37/2.03

5V 90

C

CONTROL CABLE DOUBLE BRASS TAPE SCREENEDCOPPER CONDUCTOR, PVC/PVC

5V-90 PVC Sheath

Double Brass Tape Screen

Class 2 Conductor

V-90 PVC Insulation

Part No. Number ofCores

Nom Areamm2

StrandingNo./Dia mm

Cable O/Dmm

DBT-12X1.5 12 1.5 7/0.85 19

DBT-20X1.5 20 1.5 7/0.85 22

DBT-40X1.5 40 1.5 7/0.85 29

DBT-2X2.5 2 2.5 7/0.67 13

DBT-4X2.5 4 2.5 7/0.67 15

DBT-8X2.5 8 2.5 7/0.67 19

DBT-12X2.5 12 2.5 7/0.67 21

DBT-20X2.5 20 2.5 7/0.67 25

DBT-2X4 2 4 7/0.85 15

DBT-4X4 4 4 7/0.85 17

DBT-8X4 8 4 7/0.85 23

DBT-12X4 12 4 7/0.85 25

DBT-2X6 2 6 7/1.04 17

DBT-4X6 4 6 7/1.04 19

DBT-8X6 8 6 7/1.04 25

5V 90

C

Low

Vol

tage

Cab

les

16


TM

CONTROL CABLE COPPER TAPE SCREENEDCOPPER CONDUCTOR, XLPE/PVC

Part No. Number of Cores Conductor Size mm² Overall Diameter mm Diameter Over Screen Insulation Thickness Sheath Thickness

CTS-4x025 4 2.5mm 15.9 12.1 0.7 1.9

CTS-8x025 8 2.5mm 18.3 14.5 0.7 1.9

CTS-2X040 2 4mm 15.5 11.7 0.8 1.9

CTS-4X040 4 4mm 17.3 13.5 0.8 1.9

CTS-2X060 2 6mm 17.3 13.5 0.8 1.9

CTS-4x060 4 6mm 16.7 12.9 0.8 1.9

PVC Sheath

PVC Insulation

Filler

Copper Tape Screen

nn

h

r


Low

Vol

tage

Cab

les

Freecall 1800 728 866 Fax (02) 4260 7888 Email [email protected] 9

Section 1


Section 2Medium Voltage CablesTM

Med

ium

Vol

tage

Cab

les

18

MEDIUM VOLTAGE CABLES SINGLE CORE PVC SHEATHCopper Conductor, XLPE/PVC

kV Part No. Conductor Size mm²

Core Diameter

Overall Diameter

Weight kg/m

AC Resistance 90° 50hz Ω/km

Inductance mH/km

Mutual Capacitance µF/km

Fault Current Rating kA/sec

Conductor Screen

3.8/6.6 MV-6C1P-035 35 15.13 22.65 1 0.668 0.471 0.249 5 5

MV-6C1P-050 50 16.43 24.04 1.3 0.467 0.446 0.283 7.2 7.2

MV-6C1P-070 70 17.89 25.6 1.8 0.332 0.429 0.32 10 10.1

MV-6C1P-095 95 19.45 27.27 2.1 0.247 0.409 0.359 13.6 10.1

MV-6C1P-120 120 20.81 28.73 2.4 0.196 0.388 0.393 17.2 10.1

MV-6C1P-150 150 22.27 30.29 2.7 0.157 0.375 0.43 21.5 10.1

MV-6C1P-185 185 23.8 31.93 3.1 0.128 0.363 0.468 26.5 10.1

MV-6C1P-240 240 26.14 34.43 3.7 0.099 0.35 0.511 34.3 10.1

MV-6C1P-300 300 28.62 37.09 4.5 0.08 0.341 0.538 42.9 10.1

MV-6C1P-400 400 32.07 40.77 5.5 0.061 0.334 0.585 57.2 10.1

6.35/11 MV-11C1P-035 35 17.02 24.67 1.1 0.668 0.486 0.217 5 5

MV-11C1P-050 50 18.32 26.06 1.4 0.467 0.46 0.244 7.2 7.2

MV-11C1P-070 70 19.78 27.63 1.8 0.332 0.441 0.275 10 10.1

MV-11C1P-095 95 21.34 29.29 2.2 0.247 0.421 0.308 13.6 10.1

MV-11C1P-120 120 22.7 30.75 2.5 0.196 0.399 0.336 17.2 10.1

MV-11C1P-150 150 24.16 32.31 2.8 0.157 0.386 0.366 21.5 10.1

MV-11C1P-185 185 25.69 33.95 3.2 0.128 0.374 0.397 26.5 10.1

MV-11C1P-240 240 27.82 36.23 3.9 0.099 0.358 0.441 34.3 10.1

MV-11C1P-300 300 29.88 38.44 4.6 0.08 0.347 0.482 42.9 10.1

MV-11C1P-400 400 32.91 41.67 5.6 0.062 0.338 0.544 57.2 10.1

12.7/22 MV-22C1P-035 35 21.43 29.39 1.3 0.668 0.515 0.173 5 5

MV-22C1P-050 50 22.73 30.78 1.5 0.467 0.488 0.193 7.2 7.2

MV-22C1P-070 70 24.19 32.35 2 0.332 0.468 0.215 10 10.1

MV-22C1P-095 95 25.75 34.01 2.4 0.247 0.446 0.238 13.6 10.1

MV-22C1P-120 120 27.11 35.47 2.7 0.196 0.424 0.258 17.2 10.1

MV-22C1P-150 150 28.57 37.03 3 0.157 0.41 0.279 21.5 10.1

MV-22C1P-185 185 30.1 38.67 3.5 0.128 0.397 0.302 26.5 10.1

MV-22C1P-240 240 32.23 40.95 4.1 0.099 0.385 0.332 34.3 10.1

MV-22C1P-300 300 34.29 43.16 4.9 0.08 0.372 0.362 42.9 10.1

MV-22C1P-400 400 37.32 46.39 5.9 0.061 0.357 0.405 57.2 10.1

19/33 MV-33C1P-050 50 27.98 36.4 1.9 0.467 0.518 0.16 7.2 7.2

MV-33C1P-070 70 29.44 37.96 2.4 0.332 0.495 0.177 10 10.1

MV-33C1P-095 95 31 39.63 2.7 0.247 0.473 0.194 13.6 10.1

MV-33C1P-120 120 32.36 41.09 3.1 0.195 0.455 0.21 17.2 10.1

MV-33C1P-150 150 33.82 42.65 3.4 0.157 0.439 0.226 21.5 10.1

MV-33C1P-185 185 35.35 44.28 3.9 0.127 0.425 0.242 26.5 10.1

MV-33C1P-240 240 37.48 46.57 4.6 0.098 0.407 0.265 34.3 10.1

MV-33C1P-300 300 39.54 48.77 5.3 0.08 0.398 0.287 42.9 10.1

MV-33C1P-400 400 42.57 52.01 6.4 0.061 0.38 0.32 57.2 10.1

Compact Cu Class 2 Stranded Conductor

Copper Wire Screen

PVC SheathSemi-conductive Conductor Screen

XLPE Insulation

Semi-conductive Insulation Screen

ductivee e e

n

Medium Voltage CablesSection 2

TM


Med

ium

Vol

tage

Cab

les

19

MEDIUM VOLTAGE CABLES SINGLE CORE PVC SHEATHAluminium Conductor, XLPE/PVC


Core Diameter

Overall Diameter

Weight kg/m


Inductance mH/km



Conductor Screen

3.8/6.6 MV-6A1P-035 35 15.13 21.9 0.66 1.106 0.471 0.249 3.3 3.3

MV-6A1P-050 50 16.43 23.2 0.84 0.773 0.446 0.283 4.7 4.7

MV-6A1P-070 70 17.89 25.3 1.06 0.553 0.429 0.32 6.6 6.8

MV-6A1P-095 95 19.45 26.9 1.32 0.408 0.409 0.359 9 9

MV-6A1P-120 120 20.81 27.6 1.54 0.323 0.388 0.393 11.3 10.1

MV-6A1P-150 150 22.27 29 1.65 0.259 0.375 0.43 14.2 10.1

MV-6A1P-185 185 23.8 30.5 1.76 0.211 0.363 0.468 17.5 10.1

MV-6A1P-240 240 26.14 32.9 2.04 0.162 0.35 0.511 22.7 10.1

MV-6A1P-300 300 28.62 35.3 2.31 0.13 0.341 0.538 28.3 10.1

MV-6A1P-400 400 32.07 39.8 2.7 0.099 0.334 0.585 37.8 10.1

6.35/11 MV-11A1P-035 35 17.02 23.7 0.72 1.106 0.486 0.217 3.3 3.3

MV-11A1P-050 50 18.32 25 0.9 0.773 0.46 0.244 4.7 4.7

MV-11A1P-070 70 19.78 27.1 1.16 0.553 0.441 0.275 6.6 6.8

MV-11A1P-095 95 21.34 28.7 1.43 0.408 0.421 0.308 9 9

MV-11A1P-120 120 22.7 29.4 1.6 0.323 0.399 0.336 11.3 10.1

MV-11A1P-150 150 24.16 30.8 1.71 0.259 0.386 0.366 14.2 10.1

MV-11A1P-185 185 25.69 32.3 1.87 0.212 0.374 0.397 17.5 10.1

MV-11A1P-240 240 27.82 34.5 2.15 0.162 0.358 0.441 22.7 10.1

MV-11A1P-300 300 29.88 36.5 2.37 0.13 0.347 0.482 28.3 10.1

MV-11A1P-400 400 32.91 40.6 2.75 0.0989 0.338 0.544 37.8 10.1

12.7/22 MV-22A1P-035 35 21.43 27.9 0.9 1.106 0.515 0.173 3.3 3.3

MV-22A1P-050 50 22.73 29.2 1.1 0.773 0.488 0.193 4.7 4.7

MV-22A1P-070 70 24.19 31.3 1.3 0.55 0.468 0.215 6.6 6.8

MV-22A1P-095 95 25.75 32.9 1.7 0.408 0.446 0.238 9 9

MV-22A1P-120 120 27.11 33.6 1.9 0.323 0.424 0.258 11.3 10.1

MV-22A1P-150 150 28.57 35 2 0.258 0.41 0.279 14.2 10.1

MV-22A1P-185 185 30.1 36.5 2.1 0.21 0.397 0.302 17.5 10.1

MV-22A1P-240 240 32.23 39.7 2.4 0.162 0.385 0.332 22.7 10.1

MV-22A1P-300 300 34.29 41.7 2.7 0.131 0.372 0.362 28.3 10.1

MV-22A1P-400 400 37.32 44.8 3.1 0.0987 0.357 0.405 37.8 10.1

19/33 MV-33A1P-050 50 27.98 34.2 1.4 0.773 0.518 0.16 4.7 4.7

MV-33A1P-070 70 29.44 36.3 1.7 0.55 0.495 0.177 6.6 6.8

MV-33A1P-095 95 31 37.9 2 0.408 0.473 0.194 9 9

MV-33A1P-120 120 32.36 39.6 2.2 0.323 0.455 0.21 11.3 10.1

MV-33A1P-150 150 33.82 41 2.4 0.258 0.439 0.226 14.2 10.1

MV-33A1P-185 185 35.35 42.5 2.5 0.21 0.425 0.242 17.5 10.1

MV-33A1P-240 240 37.48 44.7 2.8 0.162 0.407 0.265 22.7 10.1

MV-33A1P-300 300 39.54 47.7 3.1 0.13 0.398 0.287 28.3 10.1

MV-33A1P-400 400 42.57 50.8 3.5 0.098 0.38 0.32 37.8 10.1

Compact Al Class 2 Stranded Conductor

Copper Wire Screen

PVC SheathSemi-conductive Conductor Screen

XLPE InsulationSemi-conductive Insulation Screen

r

ductivee e ee

Section 2

Medium Voltage CablesTM


Med

ium

Vol

tage

Cab

les

20

MEDIUM VOLTAGE CABLES SINGLE CORE HDPE SHEATHCopper Conductor, XLPE/HDPE


Core Diameter

Overall Diameter

Weight kg/m


Inductance mH/km



Conductor Screen

6.35/11 MV-11C1H-035 35 17.02 26.27 0.94 0.668 0.486 0.217 5 5

MV-11C1H-050 50 18.32 27.67 1.22 0.467 0.46 0.244 7.2 7.2

MV-11C1H-070 70 19.78 29.23 1.65 0.332 0.441 0.275 10 10.1

MV-11C1H-095 95 21.34 30.9 1.97 0.247 0.421 0.308 13.6 10.1

MV-11C1H-120 120 22.7 32.36 2.29 0.196 0.399 0.336 17.2 10.1

MV-11C1H-150 150 24.16 33.92 2.62 0.157 0.386 0.366 21.5 10.1

MV-11C1H-185 185 25.69 35.55 2.99 0.128 0.374 0.397 26.5 10.1

MV-11C1H-240 240 27.82 37.84 3.64 0.099 0.358 0.441 34.3 10.1

MV-11C1H-300 300 29.88 40.04 4.35 0.08 0.347 0.482 42.9 10.1

MV-11C1H-400 400 32.91 43.28 5.34 0.062 0.338 0.544 57.2 10.1

12.7/22 MV-22C1H-035 35 21.43 30.99 1.12 0.668 0.515 0.173 5 5

MV-22C1H-050 50 22.73 32.39 1.32 0.467 0.488 0.193 7.2 7.2

MV-22C1H-070 70 24.19 33.95 1.8 0.332 0.468 0.215 10 10.1

MV-22C1H-095 95 25.75 35.62 2.2 0.247 0.446 0.238 13.6 10.1

MV-22C1H-120 120 27.11 37.08 2.49 0.196 0.424 0.258 17.2 10.1

MV-22C1H-150 150 28.57 38.64 2.78 0.157 0.41 0.279 21.5 10.1

MV-22C1H-185 185 30.1 40.27 3.28 0.128 0.397 0.302 26.5 10.1

MV-22C1H-240 240 32.23 42.55 3.88 0.099 0.385 0.332 34.3 10.1

MV-22C1H-300 300 34.29 44.76 4.67 0.08 0.372 0.362 42.9 10.1

MV-22C1H-400 400 37.32 48 5.66 0.061 0.357 0.405 57.2 10.1

19/33 MV-33C1H-050 50 27.98 37.15 1.69 0.467 0.518 0.16 7.2 7.2

MV-33C1H-070 70 29.44 38.71 2.18 0.332 0.495 0.177 10 10.1

MV-33C1H-095 95 31 40.38 2.47 0.247 0.473 0.194 13.6 10.1

MV-33C1H-120 120 32.36 41.84 2.88 0.195 0.455 0.21 17.2 10.1

MV-33C1H-150 150 33.82 43.4 3.18 0.157 0.439 0.226 21.5 10.1

MV-33C1H-185 185 35.35 45.03 3.67 0.127 0.425 0.242 26.5 10.1

MV-33C1H-240 240 37.48 47.32 4.36 0.098 0.407 0.265 34.3 10.1

MV-33C1H-300 300 39.54 49.52 5.08 0.08 0.398 0.287 42.9 10.1

MV-33C1H-400 400 42.57 52.76 6.16 0.061 0.38 0.32 57.2 10.1


Copper Wire Screen

HDPE SheathSemi-conductive Conductor Screen

XLPE Insulation Semi-conductive Insulation Screen

r

ductiver Screen

e e

nn


TM


Med

ium

Vol

tage

Cab

les

21

MEDIUM VOLTAGE CABLES 3 CORE PVC SHEATHCopper Conductor, XLPE/PVC


Core Diameter

Overall Diameter

Weight kg/m


Inductance mH/km



Conductor Screen

3.8/6.6 MV-6C3P-035 35 15.13 44.86 2.3 0.668 0.372 0.249 5 5

MV-6C3P-050 50 16.43 47.87 3 0.467 0.352 0.283 7.2 7.2

MV-6C3P-070 70 17.89 51.25 4 0.333 0.334 0.32 10 10.1

MV-6C3P-095 95 19.45 54.85 5 0.247 0.32 0.359 13.6 10.1

MV-6C3P-120 120 20.81 58 5.9 0.196 0.306 0.393 17.2 10.1

MV-6C3P-150 150 22.27 61.37 6.9 0.157 0.297 0.43 21.5 10.1

MV-6C3P-185 185 23.8 64.9 8.2 0.128 0.289 0.468 26.5 10.1

MV-6C3P-240 240 26.14 70.31 10.3 0.099 0.279 0.511 34.3 10.1

MV-6C3P-300 300 28.62 76.05 12.7 0.081 0.274 0.538 42.9 10.1

MV-6C3P-400 400 32.07 84.01 15.8 0.062 0.267 0.585 57.2 10.1

6.35/11 MV-11C3P-035 35 17.02 49.22 2.6 0.668 0.393 0.217 5 5

MV-11C3P-050 50 18.32 52.24 3.3 0.467 0.372 0.244 7.2 7.2

MV-11C3P-070 70 19.78 55.62 4.3 0.332 0.352 0.275 10 10.1

MV-11C3P-095 95 21.34 59.21 5.3 0.247 0.336 0.308 13.6 10.1

MV-11C3P-120 120 22.7 62.36 6.3 0.196 0.322 0.336 17.2 10.1

MV-11C3P-150 150 24.16 65.74 7.3 0.157 0.312 0.366 21.5 10.1

MV-11C3P-185 185 25.69 69.27 8.6 0.128 0.303 0.397 26.5 10.1

MV-11C3P-240 240 27.82 74.2 10.7 0.099 0.29 0.441 34.3 10.1

MV-11C3P-300 300 29.88 78.97 12.9 0.081 0.282 0.482 42.9 10.1

MV-11C3P-400 400 32.91 85.95 16.1 0.062 0.272 0.544 57.2 10.1

12.7/22 MV-22C3P-035 35 21.43 59.42 3.3 0.668 0.435 0.173 5 5

MV-22C3P-050 50 22.73 62.43 4 0.467 0.411 0.193 7.2 7.2

MV-22C3P-070 70 24.19 65.81 5.1 0.332 0.389 0.215 10 10.1

MV-22C3P-095 95 25.75 69.41 6.2 0.247 0.371 0.238 13.6 10.1

MV-22C3P-120 120 27.11 72.56 7.2 0.196 0.355 0.258 17.2 10.1

MV-22C3P-150 150 28.57 75.93 8.3 0.157 0.343 0.279 21.5 10.1

MV-22C3P-185 185 30.1 79.46 9.6 0.128 0.332 0.302 26.5 10.1

MV-22C3P-240 240 32.23 84.39 11.8 0.099 0.318 0.332 34.3 10.1

MV-22C3P-300 300 34.29 89.16 14.1 0.08 0.307 0.362 42.9 10.1

MV-22C3P-400 400 37.32 96.15 17.4 0.062 0.295 0.405 57.2 10.1

19/33 MV-33C3P-050 50 27.98 74.56 5.1 0.467 0.449 0.16 7.2 7.2

MV-33C3P-070 70 29.44 77.94 6.2 0.332 0.426 0.177 10 10.1

MV-33C3P-095 95 31 81.54 7.4 0.247 0.405 0.194 13.6 10.1

MV-33C3P-120 120 32.36 84.69 8.4 0.195 0.388 0.21 17.2 10.1

MV-33C3P-150 150 33.82 88.06 9.6 0.157 0.374 0.226 21.5 10.1

MV-33C3P-185 185 35.35 91.59 11 0.128 0.362 0.242 26.5 10.1

MV-33C3P-240 240 37.48 96.52 13.2 0.099 0.346 0.265 34.3 10.1

MV-33C3P-300 300 39.54 101.29 15.6 0.08 0.334 0.287 42.9 10.1

MV-33C3P-400 400 42.57 108.28 19.1 0.061 0.32 0.32 57.2 10.1


Copper Wire Screen

PVC Sheath

Filler

Semi-Conductive Conductor Screen


r

d ti eeeeeeen

n

Section 2



Med

ium

Vol

tage

Cab

les

22

MEDIUM VOLTAGE CABLES 3 CORE PVC SHEATHAluminium Conductor, XLPE/PVC


Core Diameter

Overall Diameter

Weight kg/m


Inductance mH/km



Conductor Screen

3.8/6.6 MV-6A3P-035 35 15.13 42.9 1.5 1.106 0.372 0.249 3.3 3.3

MV-6A3P-050 50 16.43 46.7 1.9 0.773 0.352 0.283 4.7 4.7

MV-6A3P-070 70 17.89 51.4 2.3 0.55 0.334 0.32 6.6 6.8

MV-6A3P-095 95 19.45 54.8 3 0.408 0.32 0.359 9 9

MV-6A3P-120 120 20.81 56.2 3.4 0.323 0.306 0.393 11.3 10.1

MV-6A3P-150 150 22.27 59.3 3.7 0.259 0.297 0.43 14.2 10.1

MV-6A3P-185 185 23.8 63.6 4.2 0.21 0.289 0.468 17.5 10.1

MV-6A3P-240 240 26.14 68.7 5.1 0.162 0.279 0.511 22.7 10.1

MV-6A3P-300 300 28.62 74 6.1 0.131 0.274 0.538 28.3 10.1

MV-6A3P-400 400 32.07 81.4 7.3 0.099 0.267 0.585 37.8 10.1

6.35/11 MV-11A3P-035 35 17.02 47.8 1.82 1.106 0.393 0.217 3.3 3.3

MV-11A3P-050 50 18.32 50.6 2.15 0.773 0.372 0.244 4.7 4.7

MV-11A3P-070 70 19.78 55.3 2.64 0.55 0.352 0.275 6.6 6.8

MV-11A3P-095 95 21.34 58.7 3.25 0.408 0.336 0.308 9 9

MV-11A3P-120 120 22.7 60.1 3.74 0.323 0.322 0.336 11.3 10.1

MV-11A3P-150 150 24.16 64.2 4.13 0.259 0.312 0.366 14.2 10.1

MV-11A3P-185 185 25.69 67.5 4.62 0.21 0.303 0.397 17.5 10.1

MV-11A3P-240 240 27.82 72.1 5.39 0.162 0.29 0.441 22.7 10.1

MV-11A3P-300 300 29.88 76.6 6.27 0.131 0.282 0.482 28.3 10.1

MV-11A3P-400 400 32.91 83.1 7.59 0.099 0.272 0.544 37.8 10.1

12.7/22 MV-22A3P-035 35 21.43 56.9 2.5 1.106 0.435 0.173 3.3 3.3

MV-22A3P-050 50 22.73 59.7 2.8 0.773 0.411 0.193 4.7 4.7

MV-22A3P-070 70 24.19 65.4 3.4 0.55 0.389 0.215 6.6 6.8

MV-22A3P-095 95 25.75 68.7 4.1 0.408 0.371 0.238 9 9

MV-22A3P-120 120 27.11 70.2 4.6 0.323 0.355 0.258 11.3 10.1

MV-22A3P-150 150 28.57 73.3 5.1 0.259 0.343 0.279 14.2 10.1

MV-22A3P-185 185 30.1 76.6 5.6 0.21 0.332 0.302 17.5 10.1

MV-22A3P-240 240 32.23 81.2 6.4 0.162 0.318 0.332 22.7 10.1

MV-22A3P-300 300 34.29 87.1 7.5 0.13 0.307 0.362 28.3 10.1

MV-22A3P-400 400 37.32 93.6 8.8 0.099 0.295 0.405 37.8 10.1

19/33 MV-33A3P-050 50 27.98 71.5 3.9 0.773 0.449 0.16 4.7 4.7

MV-33A3P-070 70 29.44 76.2 4.6 0.55 0.426 0.177 6.6 6.8

MV-33A3P-095 95 31 79.5 5.3 0.408 0.405 0.194 9 9

MV-33A3P-120 120 32.36 81 5.8 0.323 0.388 0.21 11.3 10.1

MV-33A3P-150 150 33.82 84.1 6.4 0.258 0.374 0.226 14.2 10.1

MV-33A3P-185 185 35.35 88.8 7 0.21 0.362 0.242 17.5 10.1

MV-33A3P-240 240 37.48 93.4 8 0.162 0.346 0.265 22.7 10.1

MV-33A3P-300 300 39.54 100.1 9 0.13 0.334 0.287 28.3 10.1

MV-33A3P-400 400 42.57 106.6 9.7 0.098 0.32 0.32 37.8 10.1


Copper Wire Screen

PVC Sheath

FillerSemi-Conductive Conductor Screen


r

ductive e e eeen


TM


Med

ium

Vol

tage

Cab

les

23

MEDIUM VOLTAGE CABLES 3 CORE HDPE SHEATHCopper Conductor, XLPE/HDPE


Core Diameter

Overall Diameter

Weight kg/m


Inductance mH/km



Conductor Screen

6.35/11 MV-11C3H-035 35 17.02 49.1 2.42 0.668 0.486 0.217 5 5

MV-11C3H-050 50 18.32 52.1 3.01 0.467 0.46 0.244 7.2 7.2

MV-11C3H-070 70 19.78 55.47 4.04 0.332 0.441 0.275 10 10.1

MV-11C3H-095 95 21.34 59.06 5.01 0.247 0.421 0.308 13.6 10.1

MV-11C3H-120 120 22.7 62.2 6.06 0.196 0.399 0.336 17.2 10.1

MV-11C3H-150 150 24.16 65.56 7.01 0.157 0.386 0.366 21.5 10.1

MV-11C3H-185 185 25.69 69.08 8.38 0.128 0.374 0.397 26.5 10.1

MV-11C3H-240 240 27.82 74 10.4 0.099 0.358 0.441 34.3 10.1

MV-11C3H-300 300 29.88 78.75 12.58 0.08 0.347 0.482 42.9 10.1

MV-11C3H-400 400 32.91 85.72 15.75 0.062 0.338 0.544 57.2 10.1

12.7/22 MV-22C3H-035 35 21.43 59.26 3.04 0.668 0.515 0.173 5 5

MV-22C3H-050 50 22.73 62.26 3.73 0.467 0.488 0.193 7.2 7.2

MV-22C3H-070 70 24.19 65.63 4.85 0.332 0.468 0.215 10 10.1

MV-22C3H-095 95 25.75 69.22 5.94 0.247 0.446 0.238 13.6 10.1

MV-22C3H-120 120 27.11 72.36 6.93 0.196 0.424 0.258 17.2 10.1

MV-22C3H-150 150 28.57 75.73 8.02 0.157 0.41 0.279 21.5 10.1

MV-22C3H-185 185 30.1 79.25 9.31 0.128 0.397 0.302 26.5 10.1

MV-22C3H-240 240 32.23 84.16 11.5 0.099 0.385 0.332 34.3 10.1

MV-22C3H-300 300 34.29 88.92 13.86 0.08 0.372 0.362 42.9 10.1

MV-22C3H-400 400 37.32 95.89 17.14 0.061 0.357 0.405 57.2 10.1

19/33 MV-33C3H-050 50 27.98 74.5 5.1 0.467 0.518 0.16 7.2 7.2

MV-33C3H-070 70 29.44 77.94 6.2 0.332 0.495 0.177 10 10.1

MV-33C3H-095 95 31 81.6 7.4 0.247 0.473 0.194 13.6 10.1

MV-33C3H-120 120 32.36 84.8 8.4 0.195 0.455 0.21 17.2 10.1

MV-33C3H-150 150 33.82 88.23 9.6 0.157 0.439 0.226 21.5 10.1

MV-33C3H-185 185 35.35 91.82 11 0.127 0.425 0.242 26.5 10.1

MV-33C3H-240 240 37.48 96.83 13.2 0.098 0.407 0.265 34.3 10.1

MV-33C3H-300 300 39.54 101.68 15.6 0.08 0.398 0.287 42.9 10.1

MV-33C3H-400 400 42.57 108.79 19.1 0.061 0.38 0.32 57.2 10.1

MV-22C3P-400 400 37.32 96.15 17.4 0.062 0.295 0.405 57.2 10.1


Copper Wire Screen

HDPE Sheath

Filler



e e e e een

nn

Section 2


r

ductivee


Med

ium

Vol

tage

Cab

les

24

MEDIUM VOLTAGE CABLES 3 CORE HDPE SHEATHAluminium Conductor, XLPE/HDPE


Core Diameter

Overall Diameter

Weight kg/m


Inductance mH/km



Conductor Screen

6.35/11 MV-11A3H-035 35 17.02 49.1 1.9 1.106 0.393 0.217 3.3 3.3

MV-11A3H-095 95 21.34 59.06 3.2 0.408 0.336 0.308 9 9

MV-11A3H-185 185 25.69 69.08 4.7 0.213 0.303 0.397 17.5 10.1

MV-11A3H-240 240 27.82 74 5.7 0.162 0.293 0.441 22.7 10.1

MV-11A3H-300 300 29.88 78.75 6.5 0.131 0.282 0.482 28.4 10.1

12.7/22 MV-22A3H-035 35 21.43 59.26 2.6 1.106 0.435 0.173 3.3 3.3

MV-22A3H-095 95 25.75 69.22 4 0.408 0.371 0.238 9 9

MV-22A3H-185 185 30.1 79.25 5.13 0.213 0.332 0.302 17.5 10.1

MV-22A3H-240 240 32.23 84.16 6.7 0.162 0.318 0.332 22.7 10.1

MV-6A3P-400 400 32.07 81.4 7.3 0.099 0.267 0.585 37.8 10.1


Copper Wire Screen

HDPE Sheath

FillerSemi-Conductive Conductor Screen


r

ductivee eeen

n


TM


Med

ium

Vol

tage

Cab

les

25

MEDIUM VOLTAGE CABLES 3 CORE STEEL WIRE ARMOURAluminium Conductor, XLPE/SWA/PVC


Core Diameter

Overall Diameter

Weight kg/m


Inductance mH/km



Conductor Screen

3.8/6.6 MV-6A3P-035-SWA 35 15.13 54.03 4 1.106 0.372 0.249 3.3 3.3

MV-6A3P-050-SWA 50 16.43 57.2 4.6 0.773 0.352 0.283 4.7 4.7

MV-6A3P-070-SWA 70 17.89 61.02 5.3 0.55 0.334 0.32 6.6 6.8

MV-6A3P-095-SWA 95 19.45 64.81 6.1 0.408 0.32 0.359 9 9

MV-6A3P-120-SWA 120 20.81 68.12 6.7 0.323 0.306 0.393 11.3 10.1

MV-6A3P-150-SWA 150 22.27 71.67 7.3 0.259 0.297 0.43 14.2 10.1

MV-6A3P-185-SWA 185 23.8 76.77 8.1 0.21 0.289 0.468 17.5 10.1

MV-6A3P-240-SWA 240 26.14 81.96 10.3 0.162 0.279 0.511 22.7 10.1

MV-6A3P-300-SWA 300 28.62 86.98 11.8 0.131 0.274 0.538 28.3 10.1

MV-6A3P-400-SWA 400 32.07 94.82 13.6 0.099 0.267 0.585 37.8 10.1

6.35/11 MV-11A3P-035-SWA 35 17.02 58.41 4.57 1.106 0.393 0.217 3.3 3.3

MV-11A3P-050-SWA 50 18.32 61.58 5.06 0.773 0.372 0.244 4.7 4.7

MV-11A3P-070-SWA 70 19.78 65.4 5.83 0.55 0.352 0.275 6.6 6.8

MV-11A3P-095-SWA 95 21.34 69.18 6.66 0.408 0.336 0.308 9 9

MV-11A3P-120-SWA 120 22.7 73.89 7.37 0.323 0.322 0.336 11.3 10.1

MV-11A3P-150-SWA 150 24.16 77.44 8.03 0.259 0.312 0.366 14.2 10.1

MV-11A3P-185-SWA 185 25.69 81.15 8.75 0.21 0.303 0.397 17.5 10.1

MV-11A3P-240-SWA 240 27.82 86.34 10.89 0.162 0.29 0.441 22.7 10.1

MV-11A3P-300-SWA 300 29.88 91.35 12.21 0.131 0.282 0.482 28.3 10.1

MV-11A3P-400-SWA 400 32.91 98.71 14.19 0.099 0.272 0.544 37.8 10.1

12.7/22 MV-22A3P-035-SWA 35 21.43 68.62 5.9 1.106 0.435 0.173 3.3 3.3

MV-22A3P-050-SWA 50 22.73 71.79 6.4 0.773 0.411 0.193 4.7 4.7

MV-22A3P-070-SWA 70 24.19 77 7.3 0.55 0.389 0.215 6.6 6.8

MV-22A3P-095-SWA 95 25.75 80.79 8.3 0.408 0.371 0.238 9 9

MV-22A3P-120-SWA 120 27.11 84.1 9.9 0.323 0.355 0.258 11.3 10.1

MV-22A3P-150-SWA 150 28.57 87.65 10.7 0.259 0.343 0.279 14.2 10.1

MV-22A3P-185-SWA 185 30.1 91.36 11.4 0.21 0.332 0.302 17.5 10.1

MV-22A3P-240-SWA 240 32.23 96.55 12.7 0.162 0.318 0.332 22.7 10.1

MV-22A3P-300-SWA 300 34.29 101.57 14.3 0.13 0.307 0.362 28.3 10.1

MV-22A3P-400-SWA 400 37.32 108.92 16.2 0.099 0.295 0.405 37.8 10.1

19/33 MV-33A3P-050-SWA 50 27.98 85.34 9.7 0.773 0.449 0.16 4.7 4.7

MV-33A3P-070-SWA 70 29.44 89.16 10.3 0.55 0.426 0.177 6.6 6.8

MV-33A3P-095-SWA 95 31 92.94 11.3 0.408 0.405 0.194 9 9

MV-33A3P-120-SWA 120 32.36 96.26 12.1 0.323 0.388 0.21 11.3 10.1

MV-33A3P-150-SWA 150 33.82 99.8 13 0.258 0.374 0.226 14.2 10.1

MV-33A3P-185-SWA 185 35.35 103.52 14 0.21 0.362 0.242 17.5 10.1

MV-33A3P-240-SWA 240 37.48 108.71 15.4 0.162 0.346 0.265 22.7 10.1

MV-33A3P-300-SWA 300 39.54 113.72 16.8 0.13 0.334 0.287 28.3 10.1

MV-33A3P-400-SWA 400 42.57 121.07 19.5 0.098 0.32 0.32 37.8 10.1


Copper Wire Screen

PVC Bedding

Filler

HDPE or PVC Sheath


XLPE Insulation



uctiveScreen

e n

n

eelelll

Section 2



Med

ium

Vol

tage

Cab

les

26

MEDIUM VOLTAGE CABLES 3 CORE STEEL WIRE ARMOURCopper Conductor, XLPE/SWA/PVC


Core Diameter

Overall Diameter

Weight kg/m


Inductance mH/km



Conductor Screen

3.8/6.6 MV-6C3P-035-SWA 35 15.13 54.03 4.9 0.668 0.372 0.249 5 5

MV-6C3P-050-SWA 50 16.43 57.2 5.7 0.467 0.352 0.283 7.2 7.2

MV-6C3P-070-SWA 70 17.89 61.02 6.9 0.333 0.334 0.32 10 10.1

MV-6C3P-095-SWA 95 19.45 64.81 8.1 0.247 0.32 0.359 13.6 10.1

MV-6C3P-120-SWA 120 20.81 68.12 9.4 0.196 0.306 0.393 17.2 10.1

MV-6C3P-150-SWA 150 22.27 71.67 10.6 0.157 0.297 0.43 21.5 10.1

MV-6C3P-185-SWA 185 23.8 76.77 12.1 0.128 0.289 0.468 26.5 10.1

MV-6C3P-240-SWA 240 26.14 81.96 15.6 0.099 0.279 0.511 34.3 10.1

MV-6C3P-300-SWA 300 28.62 86.98 18.4 0.081 0.274 0.538 42.9 10.1

MV-6C3P-400-SWA 400 32.07 94.82 22.3 0.062 0.267 0.585 57.2 10.1

6.35/11 MV-11C3P-035-SWA 35 17.02 58.41 5.39 0.668 0.393 0.217 5 5

MV-11C3P-050-SWA 50 18.32 61.58 6.22 0.467 0.372 0.244 7.2 7.2

MV-11C3P-070-SWA 70 19.78 65.4 7.3 0.332 0.352 0.275 10 10.1

MV-11C3P-095-SWA 95 21.34 69.18 8.75 0.247 0.336 0.308 13.6 10.1

MV-11C3P-120-SWA 120 22.7 73.89 10.01 0.196 0.322 0.336 17.2 10.1

MV-11C3P-150-SWA 150 24.16 77.44 11.22 0.157 0.312 0.366 21.5 10.1

MV-11C3P-185-SWA 185 25.69 81.15 12.76 0.128 0.303 0.397 26.5 10.1

MV-11C3P-240-SWA 240 27.82 86.34 16.28 0.099 0.29 0.441 34.3 10.1

MV-11C3P-300-SWA 300 29.88 91.35 19.03 0.081 0.282 0.482 42.9 10.1

MV-11C3P-400-SWA 400 32.91 98.71 22.77 0.062 0.272 0.544 57.2 10.1

12.7/22 MV-22C3P-035-SWA 35 21.43 68.62 6.4 0.668 0.435 0.173 5 5

MV-22C3P-050-SWA 50 22.73 71.79 7.2 0.467 0.411 0.193 7.2 7.2

MV-22C3P-070-SWA 70 24.19 77 8.6 0.332 0.389 0.215 10 10.1

MV-22C3P-095-SWA 95 25.75 80.79 9.8 0.247 0.371 0.238 13.6 10.1

MV-22C3P-120-SWA 120 27.11 84.1 12 0.196 0.355 0.258 17.2 10.1

MV-22C3P-150-SWA 150 28.57 87.65 13.2 0.157 0.343 0.279 21.5 10.1

MV-22C3P-185-SWA 185 30.1 91.36 14.9 0.128 0.332 0.302 26.5 10.1

MV-22C3P-240-SWA 240 32.23 96.55 17.3 0.099 0.318 0.332 34.3 10.1

MV-22C3P-300-SWA 300 34.29 101.57 20.1 0.08 0.307 0.362 42.9 10.1

MV-22C3P-400-SWA 400 37.32 108.92 23.7 0.062 0.295 0.405 57.2 10.1

19/33 MV-33C3P-050-SWA 50 27.98 85.34 10.5 0.467 0.449 0.16 7.2 7.2

MV-33C3P-070-SWA 70 29.44 89.16 12 0.332 0.426 0.177 10 10.1

MV-33C3P-095-SWA 95 31 92.94 13.4 0.247 0.405 0.194 13.6 10.1

MV-33C3P-120-SWA 120 32.36 96.26 14.7 0.195 0.388 0.21 17.2 10.1

MV-33C3P-150-SWA 150 33.82 99.8 16.3 0.157 0.374 0.226 21.5 10.1

MV-33C3P-185-SWA 185 35.35 103.52 18 0.128 0.362 0.242 26.5 10.1

MV-33C3P-240-SWA 240 37.48 108.71 20.7 0.099 0.346 0.265 34.3 10.1

MV-33C3P-300-SWA 300 39.54 113.72 23.7 0.08 0.334 0.287 42.9 10.1

MV-33C3P-400-SWA 400 42.57 121.07 28.4 0.061 0.32 0.32 57.2 10.1


Copper Wire Screen

PVC Bedding

Filler

HDPE or PVC Sheath


XLPE Insulation



uctive Screenn

en

n

eel


TM


Med

ium

Vol

tage

Cab

les

Freecall 1800 728 866 Fax (02) 4260 7888 Email [email protected] 25

Section 2


Nylon Sheath Cables

PREVENT TERMITE DAMAGE

In areas where subterranean termite species such as Coptotermes acinaciformis are prevalent, Deltafl ex recommends cables manufactured with an additional nylon sheath. Nylon resists termite destruction due to its surface hardness and smooth texture. Termites are unable to breach the nylon layer as their mandibles are unable to grip the surface or penetrate it.

The nylon sheath is a very thin layer that is normally applied over a PVC sheath. A sacrifi cial sheath of HDPE or PVC is further applied to prevent mechanical damage to the nylon sheath during installation.

Deltafl ex can produce nylon sheathed cables up to 100mm diameter.

For further information

Freecall 1800 007 458

Eltech Industries is a company dedicated

to a commitment of product quality and the

Deltafl ex™ Cables range is no exception to this

committal. Not a stone is left unturned to ensure

premium quality is maintained and all cables are

put through thorough and exhaustive testing

cycles during design and manufacture. That’s

why Eltech Industries can guarantee long life

spans with its Deltafl ex™ Cables products, no

matter how harsh the application or environment.

“Committed to Service”

Specialised Cable Solutions

ducts, no

application or environment.Spe

Eltec

ong life

x™ Cables products, no

arsh the application or environment.Spec

e is no e

stone is left un

s maintained a

duct quality

bles range is no exce

t a stone is left untur

ity is maintained and

horough and exhau

des

Eltech Industries is a company dedicated

to a commitment of product quality and the

Deltafl ex™ Cables range is no exception to this

committal. Not a stone is left unturned to ensure

premium quality is maintained and all cables are

put through thorough and exhaustive testing

cycles during design and manufacture. That’s

why Eltech Industries can guarantee long li

spans with its Deltafl ex™ Ca

matter how hape

Specifi cations

Section 3TM

Spec

ifi ca

tion

s

30

Specifi cationsSection 3

TM

General

Type: Single core fl ex V90HT 0.6/1kV

Standards: AS/NZS1125, AS/NZS5000.1, AS/NZS1660, AS/NZS3808, AS3191, AS3178IEC60228, IEC60332-1

Voltage: 0.6/1kV

Operating Temp: -20°C - +105°C

Conductor

Material: Tinned annealed copper - from 0.50-6.00mm2

Stranding: Class 5

Insulation

Material: V90HT

Colours: Red, White, Blue, Black, Grey*, Violet*, Orange*, Pink*, Brown*, Green/Yellow, Stripes on request.*These colours are only available in sizes 0.50-1.5mm2

Panel Flex V90HT 0.6/1kV

General

Type: Single core double insulated fl ex 110°C 0.6/1kV

Standards: AS/NZS1125, AS/NZS5000.1, AS/NZS1660, AS/NZS3808, IEC60228, IEC60332-1

Voltage: 0.6/1kV


Conductor

Material: Annealed copper

Stranding: Class 6

Insulation

Material: R-E-110

Colour: White

Sheath

Material: E-110-R

Colour: Orange

SDI Flexible R-E-110 0.6/1kV


Spec

ifi ca

tion

s

31

Section 3

Specifi cationsTM

General

Type: Single core double insulated fl ex R-EP-110 1.9/3.3kV

Standards: AS/NZS1125, AS/NZS5000.1, AS/NZS 1429.1

Voltage: 1.9/3.3kV


Conductor

Material: Tinned annealed copper

Stranding: Class 5

Insulation

Material: EPR R-EP-110

Colours: Natural

Sheath

Material: CPE

Colours: Black

SDI Flexible R-E-110 1.9/3.3kV

General

Type: Single Core Double Insulated Fire Rated Flex 110°C 0.6/1kV XHF-110 LSHF

Standards: AS/NZS1125, AS/NZS5000.1, AS/NZS3013, IEC60228

Voltage: 0.6/1kV


Conductor

Material: Annealed Copper

Stranding: Class 6

Flame Barrier: Mica Glass Tape

Insulation Material: XHF-110

Colours: White

Sheath Material: HFS-110-TP

Colours: Red

Fire Rated Flexible 110°C 0.6/1kV XHF-110 LSHF


Spec

ifi ca

tion

s

32


TM

General

Type: Control Cable Copper Braid Screened V-75

Standards: AS/NZS1125.2001, AS/NZS5000.1, AS/NZS3808

Voltage: 300/500V


Conductor

Material: Plain annealed copper

Stranding: Class 5

Insulation

Material: V-75

Colour: Black with white numbering

Screen

Material: Tinned copper braid

Sheath

Material: PVC 4V-75

Colours: Clear

Multicore Control Cable - Screened 300/500V V75TM

General

Type: Multicore Control Cable CC

Standards: VDE 0281 Part 1, VDE 0293, VDE 0295

Voltage: 300/500V


Conductor


Stranding: Class 5

Insulation

Material: PVC V75

Colours: Black with White Numbers + Green/Yellow (Earth Core)

Sheath

Material: PVC

Colours: Grey

Multicore Control Cable - Unscreened 300/500V V75


Spec

ifi ca

tion

s

33

Section 3

Specifi cationsTM

General

Type: Power Cable Copper Braid Screened V-75


Voltage: 0.6/1kV


Conductor


Stranding: Class 5

Insulation

Material: V-75

Colour: Red, White, Blue, Green/Yellow

Screen

Material: Tinned copper braid

Sheath

Material: PVC 4V-75

Colours: Clear

Multicore Power Cable - Screened 600/1000VTM

General

Type: Multicore Flexible Rubber Cable H07RN-F 0.6/1kV


Voltage: 0.6/1kV


Conductor


Stranding: Class 5

Insulation

Material: R-EP-90

Colours: 2 Core: Blue, Brown3 Core: Blue, Brown, Green/Yellow 4 Core: Brown, Black, Grey, Green/Yellow5 Core: Brown, Black, Grey, Blue Green/Yellow

Sheath

Material: Elastomer Rubber GP-85-PCP

Colours: Black

Multicore Flexible Rubber Cable - 600/1000V


Spec

ifi ca

tion

s

34


TM

General

Type: Instrumentation Cable Overall & Individual Screened EILT

Standards: AS/NZS1125.2001, AS/NZS3808

Voltage: 240V – Not for mains connection


Conductor


Stranding: Class 2

Insulation

Material: PVC V-75

Colours: Black with w/- Numbers & White w/- Black numbers

Screen

Material: Aluminium tape screen, polyester mylar tape lapping and 7/0.20mm tinned copper drain wire

Sheath

Material: PVC V90HT

Colours: Black

Instrumentation Cable Multipair Overall & Individual Screened V90HT

General

Type: Instrumentation Cable ELT

Standards: AS/NZS 1125, AS/NZS 3808



Conductor


Stranding: Class 2

Insulation

Material: PVC V75


Screen


Sheath

Material: PVC V90HT

Colours: Black

Instrumentation Cable Multipair Overall Screened V90HT


Spec

ifi ca

tion

s

35

Section 3

Specifi cationsTM

General

Type: SWA Instrumentation Cable ELT

Standards: AS/NZS 1125, AS/NZS 3808



Conductor


Stranding: Class 2

Insulation

Material: PVC V90HT


Screen


Armour

Material: Single Layer Galvanised Steel Strands

Sheath

Material: PVC V90HT

Colours Black or Blue

SWA Instrumentation Cable Multipair Overall Screened V90HT

General

Type: Double Brass Tape Screened Power Cable

Standards: AS/NZS1125, AS/NZS 3008, AS/NZS3808, AS/NZS 5000.1, AS/NZS1660

Voltage: 0.6/1kV

Operating Temp: -25°C to +90°C

Conductor

Material: Plain Annealed Copper

Stranding: Class 2

Insulation

Material: PVC V90

Colours: Red, White, Blue, Black

Screen

Material: Laid Up Double Brass Tape – 0.8mm thick

Sheath

Material: PVC 5V-90

Colours Black

Power Cable Double Tape Brass Screen


Spec

ifi ca

tion

s

36


TM

General

Type: Double Brass Tape Screened Power Cable

Standards: AS/NZS1125, AS/NZS 3008, AS/NZS3808, AS/NZS 5000.1, AS/NZS1660

Voltage: 0.6/1kV


Conductor

Material: Plain Annealed Copper

Stranding: Class 2

Insulation

Material: PVC V90

Colours: White with Black numbering

Screen

Material: Laid Up Double Brass Tape – 0.8mm thick

Sheath

Material: PVC 5V-90

Colours: Black

Control Cable Double Tape Brass Screen

General

Type: Control Cable Copper Tape Screened V90


Voltage: 0.6/1kV


Conductor


Stranding: Class 2

Insulation

Material: PVC V90

Colours: White with Black Numbering

Screen

Material: Copper tape screen, 0.8mm thick, min. 25% lapping

Sheath

Material: PVC 5V-90

Colours: Black

Control Cable Copper Tape Screened


Spec

ifi ca

tion

s

37

Section 3

Specifi cationsTM


General

Type: Single Core PVC/HDPE Sheath

Voltage Rating: 11, 22, 33kV

Operating Conductor Temperature: -25 to 90°C

Emergency Conductor Temperature: 105°C

Short Circuit Conductor Temperature: Max. 250°C for 5 sec

Max. Working Tension: 0.07kN/mm² (total)

Conductor: Class 2 Compact Stranded Plain Annealed Copper or Aluminium

Insulation: Triple Extruded XLPE & Semi-Conductive Layers

Screen: Annealed Plain Copper Strands

Sheath: PVC or HDPE

Armour:

Core Identifi cation: White

Standards ASNZS 1125, AS/NZS 1429.1, AS/NZS 3808

Medium Voltage Single Core PVC/HDPE Sheath

General

Type: Three Core PVC Sheath

Voltage Rating: 6.6, 11, 22, 33kV








Sheath: UV Stabilised PVC

Armour:

Core Identifi cation: Red, White, Blue


Medium Voltage Three Core PVC Sheath

Spec

ifi ca

tion

s

38


TM

General

Type: Three Core Steel Wire Armoured

Voltage Rating: 6.6, 11, 22, 33kV





Conductor: Class 2 Compact Stranded Plain Annealed Copper



Sheath: UV Stabilised PVC (HDPE on Request)

Armour: Single Layer Galvanised Steel Strands


Standards ASNZS 1125, AS/NZS 1429.1, AS/NZS 3808, AS/NZS 3863

Medium Voltage Three Core Steel Wire Armoured

General

Type: Three Core HDPE Sheath

Voltage Rating: 11, 22, 33kV








Sheath: HDPE

Armour:



Medium Voltage Three Core HDPE Sheath


Custom cable enquiry received & forwarded on to

our ‘in-house’ electrical engineering team.Stage 1

Specifi cations established & enquiry forwarded on

to one of our notable global cable factories.Stage 2

Proposal including technical specifi cation details

submitted back to you for your evaluation.Stage 3

Should the proposal be favorable & meet

your requirements, both parties sign-off on

the submitted specifi cation sheet as approved

and suitable for the application the cable is required for.

Stage 4

Stage 1Stage 1

The cable is then manufactured, checked &

tested to the relevant standards. The cable is then

signed-off by Eltech and delivered with

the relevant test reports.Stage 5

THE 5 STAGE PROCESS TO

CUSTOMER SATISFACTION

CABLE MANAGEMENT

SUPPLIERS OF SPECIALISED HARDWARE & TOOLING TO THE INDUSTRIAL ELECTRICAL & AUTOMATION INDUSTRIES

• Galvanised Saddles• Girder Clips• P-Clips• Jack Chain• Earth Stakes & Clips• Glands & Locknuts• Nylon Hole Plugs & Snap Bushes• PVC Screw Bushes & Conduit Stops• Spiral Binding & Loom Tube• Nylon Cable Ties & Accessories• Stainless Steel Cable Ties• Heatshrink Products• Electrical Tapes

CABLE TERMINATION

Freecall: 1800 007 458 Web: www.eltechindustries.com.au

• Pre-insulated Terminals• Insulated Screw Connectors

• Terminal Block Strip Connectors• Cord End Ferrules

• Crimp Lugs & Links

For our complete range of products

visit www.eltechindustries.com.au to view or download our Catalogue

Term

s &

Cond

itio

ns

42

1. Defi nitions1.1 “Company” shall mean JA Arkcoll ATF Clancy Estate Trust and others T/A Eltech

Industries and its successors and assigns.1.2 “Customer” shall mean the Customer or any person acting on behalf of and with the

authority of the Customer.1.3 “Guarantor” means that person (or persons), or entity who agrees herein to be liable for

the debts of the Customer on a principal debtor basis.1.4 “Goods” shall mean Goods supplied by the Company to the Customer (and where the

context so permits shall include any supply of Services as hereinafter defi ned).1.5 “Services” shall mean all services supplied by the Company to the Customer and includes

any advice or recommendations (and where the context so permits shall include any supply of Goods as defi ned supra).

1.6 “Price” shall mean the cost of the Goods as agreed between the Company and the Customer subject to clause 4 of this contract.

2. Acceptance2.1 Any instructions received by the Company from the Customer for the supply of Goods

and/or the Customer’s acceptance of Goods supplied by the Company shall constitute acceptance of the terms and conditions contained herein.

2.2 Where more than one Customer has entered into this agreement, the Customer’s shall be jointly and severally liable for all payments of the Price.

2.3 Upon acceptance of these terms and conditions by the Customer the terms and conditions are irrevocable and can only be rescinded in accordance with these terms and conditions or with the written consent of the manager of the Company.

2.4 None of the Company’s agents or representatives are authorised to make any representations, of the Company in writing nor is the Company bound by any such unauthorised statements.

2.5 The Customer undertakes to give the Company not less than fourteen (14) days prior written notice of any proposed change in the Customer’s name and/or any other change in the Customer’s details (including but not limited to, changes in the Customer’s address, facsimile number, or business practice).

3. Goods3.1 The Goods are as described on the invoices and quotation as provided by the Company

to the Customer.4. Price And Payment4.1 At the Company’s sole discretion; (a) The Price shall be as indicated on invoices provided by the Company to the Customer

in respect of Goods supplied; or (b) The Price shall be the Company’s current Price, at the date of delivery of the Goods,

according to the Company’s current Price list; or (c) The Price of the Goods shall (subject to clause 4.2) be the Company’s quoted Price

which shall be binding upon the Company provided that the Customer shall accept in writing the Company’s quotation within fourteen (14) days.

4.2 Any variation from the plan of scheduled works or specifi cations will be charged for on the basis of the Company’s quotation and will be shown as variations on the invoice. Payment for all variations must be made in full at their time of completion.

4.3 Time for payment for the Goods shall be of the essence and will be stated on the invoice, quotation or any other order forms. If no time is stated then payment shall be on delivery of the Goods.

4.4 The Company may withhold delivery of the Goods until the Customer has paid for them, in which event payment shall be made before the delivery date.

4.5 At the Company’s sole discretion, for certain approved Customers payment will be due thirty (30) days following the date of the invoice.

4.6 Payment will be made by cash on delivery, or by cheque, or by bank cheque, or by credit card, or by direct credit, or by any other method as agreed to between the Customer and the Company.

4.7 The Price shall be increased by the amount of any GST and other taxes and duties which may be applicable, except to the extent that such taxes are expressly included in any quotation given by the Company

5. Delivery Of Goods / Services5.1 Delivery of the Goods shall be made to the Customer’s address. The Customer shall make

all arrangements necessary to take delivery of the Goods whenever they are tendered for delivery, or delivery of the Goods shall be made to the Customer at the Company’s address.

5.2 Delivery of the Goods to a carrier, either named by the Customer or failing such naming to a carrier at the discretion of the Company for the purpose of transmission to the Customer, is deemed to be a delivery of the Goods to the Customer.

5.3 The costs of carriage and any insurance which the Customer reasonably directs the Company to incur shall be reimbursed by the Customer (without any set-off or other withholding whatever) and shall be due on the date for payment of the Price. The carrier shall be deemed to be the Customer’s agent.

5.4 Where there is no agreement that the Company shall send the Goods to the Customer, delivery to a carrier at limited carrier’s risk at the expense of the Customer is deemed to be delivery to the Customer.

5.5 The Company may deliver the Goods by separate installments (in accordance with the agreed delivery schedule). Each separate installment shall be invoiced and paid for in accordance with the provisions in this contract of sale.

5.6 Delivery of the Goods to a third party nominated by the Customer is deemed to be delivery to the Customer for the purposes of this agreement.

5.7 The Customer shall take delivery of the Goods tendered notwithstanding that the quantity so delivered shall be either greater or less than the quantity purchased provided that;

(a) such discrepancy in quantity shall not exceed 10%, and

(b) the Price shall be adjusted pro rata to the discrepancy.5.8 The failure of the Company to deliver shall not entitle either party to treat this contract as

repudiated.5.9 The Company shall not be liable for any loss or damage whatsoever due to failure by the

Company to deliver the Goods (or any of them) promptly or at all.6. Risk6.1 If the Company retains property in the Goods nonetheless, all risk for the Goods passes

to the Customer on delivery.6.2 If any of the Goods are damaged or destroyed prior to property in them passing to the

Customer, the Company is entitled, without prejudice to any of its other rights or remedies under these Terms and Conditions of Trade (including the right to receive payment of the balance of the Price for the Goods), to receive all insurance proceeds payable for the Goods. This applies whether or not the Price has become payable under the Contract. The production of these terms and conditions by the Company is suffi cient evidence of the Company’s rights to receive the insurance proceeds without the need for any person dealing with the Company to make further enquiries.

7. Customer’s Disclaimer7.1 The Customer hereby disclaims any right to rescind, or cancel the contract or to sue

for damages or to claim restitution arising out of any misrepresentation made to him by any servant or agent of the Company and the Customer acknowledges that he buys the Goods relying solely upon his own skill and judgement and that the Company shall not be bound by nor responsible for any term, condition, representation or warranty other than the warranty given by the Manufacturer which warranty shall be personal to the Customer and shall not be transferable to any subsequent Customer.

8. Defect/Returns8.1 The Customer shall inspect the Goods on delivery and shall within seven (7) days of

delivery notify the Company of any alleged defect, shortage in quantity, damage or failure to comply with the description or quote. The Customer shall afford the Company an opportunity to inspect the Goods within a reasonable time following delivery if the Customer believes the Goods are defective in any way. If the Customer shall fail to comply with these provisions, the Goods shall be conclusively presumed to be in accordance with the terms and conditions and free from any defect or damage.

8.2 For defective Goods, which the Company has agreed in writing that the Customer is entitled to reject, the Company’s liability is limited to either (at the Company’s discretion) replacing the Goods or repairing the Goods provided that:

(a) the Customer has complied with the provisions of clause 8.1; (b) the Company will not be liable for Goods which have not been stored or used in a

proper manner; (c) the Goods are returned in the condition in which they were delivered with all packaging

material and accompanied by proof of purchase.(d) Goods must be accompanied by a GOODS RETURN FORM, which is included in this

catalogue.8.3 The Company may (in its discretion) accept the Goods for credit but this may incur a

restocking fee of 20% of the value of the returned Goods plus any freight.8.4 Goods made to special order, Customer specifi cation, non-catalogue items or product

cut to length are under no circumstances acceptable for credit or return. Cancellation of orders for special or non-catalogue items will defi nitely not be accepted, once these orders have been processed.

9. Lien9.1 Where the Company has not received or been tendered the whole of the price, or the

payment has been dishonoured, the Company shall have: (a) a lien on the goods; (b) the right to retain them for the price while the Company is in possession of them; (c) a right of stopping the goods in transit whether or not delivery has been made or

ownership has passed; and (d) a right of resale, (e) the foregoing right of disposal, provided that the lien of the Company shall continue

despite the commencement of proceedings or judgement for the price having been obtained.

10. The Commonwealth Trade Practices Act 1974 and Fair Trading Acts10.1 Nothing in this agreement is intended to have the affect of contracting out of any

applicable provisions of the Commonwealth Trade Practices Act 1974 or the Fair Trading Acts in each of the States and Territories of Australia, except to the extent permitted by those Acts where applicable.

11. Intellectual Property11.1 Where the Company has designed or drawn Goods for the Customer, then the copyright

in those designs and drawings shall remain vested in the Company, and shall only be used by the Customer at the Company’s discretion.

11.2 Conversely, in such a situation, where the Customer has supplied drawings, the Company in its sale conditions may look for an indemnity (the specifi cations and design of the Goods (including the copyright, design right or other intellectual property in them) shall as between the parties be the property of the Company).

11.3 Where any designs or specifi cations have been supplied by the Customer for manufacture by or to the order of the Company then the Customer warrants that the use of those designs or specifi cations for the manufacture, processing, assembly or supply of the Goods shall not infringe the rights of any third party.

11.4 Customer warrants that all designs or instructions to the Company will not cause the Company to infringe any patent, registered design or trademark in the execution of the Customers order.

12. Default & Consequences Of Default12.1 Interest on overdue invoices shall accrue from the date when payment becomes due daily

Eltech Industries – Terms & Conditions of Trade

Terms & ConditionsTM


Term

s &

Cond

itio

ns

43

until the date of payment at a rate of 2.5% per calendar month and shall accrue at such a rate after as well as before any judgement.

12.2 If the Customer defaults in payment of any invoice when due, the Customer shall indemnify the Company from and against all the Company’s costs and disbursements including on a solicitor and own client basis and in addition all of the Company’s nominees costs of collection.

12.3 Without prejudice to any other remedies the Company may have, if at any time the Customer is in breach of any obligation (including those relating to payment), the Company may suspend or terminate the supply of Goods to the Customer and any of its other obligations under the terms and conditions. The Company will not be liable to the Customer for any loss or damage the Customer suffers because the Company exercised its rights under this clause.

12.4 If any account remains unpaid at the end of the second month after supply of the goods or services the following shall apply: An immediate amount of the greater of $20.00 or 10.00% of the amount overdue shall be levied for administration fees which sum shall become immediately due and payable.

12.5 In the event that: (a) any money payable to the Company becomes overdue, or in the Company’s opinion

the Customer will be unable to meet its payments as they fall due; or (b) the Customer becomes insolvent, convenes a meeting with its creditors or proposes

or enters into an arrangement with creditors, or makes an assignment for the benefi t of its creditors; or

(c) a receiver, manager, liquidator (provisional or otherwise) or similar person is appointed in respect of the Customer or any asset of the Customer; then without prejudice to the Company’s other remedies at law

(i) the Company shall be entitled to cancel all or any part of any order of the Customer which remains unperformed in addition to and without prejudice to any other remedies; and

(ii) all amounts owing to the Company shall, whether or not due for payment, immediately become payable.

13. Title13.1 It is the intention of the Company and agreed by the Customer that property in the Goods

shall not pass until: (a) The Customer has paid all amounts owing for the particular Goods, and (b) The Customer has met all other obligations due by the Customer to the Company in

respect of all contracts between the Company and the Customer, and that the Goods shall be kept separate until the Company shall have received payment and all other obligations of the Customer are met.

13.2 It is further agreed that: (a) The Customer shall not deal with the money of the Company in any way which may be

adverse to the Company. (b) Until such time as ownership of the Goods shall pass from the Company to the

Customer the Company may give notice in writing to the Customer to return the Goods or any of them to the Company. Upon such notice the rights of the Customer to obtain ownership or any other interest in the Goods shall cease.

(c) If the Customer fails to return the Goods to the Company then the Company or the Company’s agent may enter upon and into land and premises owned, occupied or used by the Customer, or any premises as the invitee of the Customer, where the Goods are situated and take possession of the Goods, without being responsible for any damage thereby caused.

(d) Receipt by the Company of any form of payment other than cash shall not be deemed to be payment until that form of payment has been honoured, cleared or recognised and until then the Company’s ownership of rights in respect of the Goods shall continue.

(e) The Customer shall not charge the Goods in any way nor grant nor otherwise give any interest in the Goods while they remain the property of the Company.

(f) The Company may require payment of the Price or the balance of the Price due together with any other amounts due from the Customer to the Company arising out of these terms and conditions, and the Company may take any lawful steps to require payment of the amounts due and the Price.

(g) The Company can issue proceedings to recover the Price of the Goods sold notwithstanding that ownership of the Goods may not have passed to the Customer.

(h) Until such time the Customer has the Company’s authority to convert the Goods into other products and if the Goods are so converted, the parties agree that the Company will be the owner of the end products.

(i) Until such time the Customer has the Company’s authority to convert the goods into other products and if the goods are so converted, the parties agree that the Company will be the owner of the end products.

14. Security And Charge14.1 Notwithstanding anything to the contrary contained herein or any other rights which the

Company may have howsoever: (a) Where the Customer and/or the Guarantor (if any) is the owner of land, realty or any

other asset capable of being charged, both the Customer and/or the Guarantor agree to mortgage and/or charge all of their joint and/or several interest in the said land, realty or any other asset to the Company or the Company’s nominee to secure all amounts and other monetary obligations payable under the terms and conditions. The Customer and/or the Guarantor acknowledge and agree that the Company (or the Company’s nominee) shall be entitled to lodge where appropriate a caveat, which caveat shall be released once all payments and other monetary obligations payable hereunder have been met.

(b) Should the Company elect to proceed in any manner in accordance with this clause and/or its sub-clauses, the Customer and/or Guarantor shall indemnify the Company from and against all the Company’s costs and disbursements including legal costs on a solicitor and own client basis.

(c) To give effect to the provisions of clause [14.1 (a) and (b)] inclusive hereof the Customer

and/or the Guarantor (if any) do hereby irrevocably nominate constitute and appoint the Company or the Company’s nominee as the Customer’s and/or Guarantor’s true and lawful attorney to execute mortgages and charges (whether registerable or not) including such other terms and conditions as the Company and/or the Company’s nominee shall think fi t in his/her/its/their absolute discretion against the joint and/or several interest of the Customer and/or the Guarantor in any land, realty or asset in favour of the Company and in the Customer’s and/or Guarantor’s name as may be necessary to secure the said Customer’s and/or Guarantor’s obligations and indebtedness to the Company and further to do and perform all necessary and other acts including instituting any necessary legal proceedings, and further to execute all or any documents in the Company’s absolute discretion which may be necessary or advantageous to give effect to the provisions of this clause.

15. Cancellation

15.1 The Company may cancel these terms and conditions or cancel delivery of Goods at any time before the Goods are delivered by giving written notice. The Company shall not be liable for any loss or damage whatsoever arising from such cancellation.

16. Privacy Act 1988

16.1 The Customer and/or the Guarantor/s agree for the Company to obtain from a credit reporting agency a credit report containing personal credit information about the Customer and Guarantor/s in relation to credit provided by the Company.

16.2 The Customer and/or the Guarantor/s agree that the Company may exchange information about Customer and Guarantor/s with those credit providers named in the Application for Credit account or named in a consumer credit report issued by a reporting agency for the following purposes:

(a) To assess an application by Customer;

(b) To notify other credit providers of a default by the Customer;

(c) To exchange information with other credit providers as to the status of this credit account, where the Customer is in default with other credit providers; and

(d) To assess the credit worthiness of Customer and/or Guarantor/s.

16.3 The Customer consents to the Company being given a consumer credit report to collect overdue payment on commercial credit (Section 18K(1)(h) Privacy Act 1988).

16.4 The Customer agrees that Personal Data provided may be used and retained by the Company for the following purposes and for other purposes as shall be agreed between the Customer and Company or required by law from time to time:

(a) provision of Services & Goods;

(b) marketing of Services and or Goods by the Company, its agents or distributors in relation to the Services and Goods;

(c) analysing, verifying and/or checking the Customer’s credit, payment and/or status in relation to provision of Services/Goods;

(d) processing of any payment instructions, direct debit facilities and/or credit facilities requested by Customer; and

(e) enabling the daily operation of Customer’s account and/or the collection of amounts outstanding in the Customer’s account in relation to the Services and Goods.

16.5 The Company may give, information about the Customer to a credit reporting agency for the following purposes:

(a) to obtain a consumer credit report about the Customer; and or

(b) allow the credit reporting agency to create or maintain a credit information fi le containing information about the Customer.

17. Unpaid Company’s Rights To Dispose Of Goods

17.1 In the event that:

(a) the Company retains possession or control of the Goods; and

(b) payment of the Price is due to the Company; and

(c) the Company has made demand in writing of the Customer for payment of the Price in terms of this contract; and

(d) the Company has not received the Price of the Goods, then, whether the property in the Goods has passed to the Customer or has remained with the Company, the Company may dispose of the Goods and may claim from the Customer the loss to the Company on such disposal.

18. General

18.1 If any provision of these terms and conditions shall be invalid, void or illegal or unenforceable the validity existence, legality and enforceability of the remaining provisions shall not be affected, prejudiced or impaired.

18.2 All Goods supplied by the Company are subject to the laws of Victoria and the Company takes no responsibility for changes in the law which affect the Goods supplied.

18.3 The Company shall be under no liability whatsoever to the Customer for any indirect loss and/or expense (including loss of profi t) suffered by the Customer arising out of a breach by the Company of these terms and conditions.

18.4 In the event of any breach of this contract by the Company the remedies of the Customer shall be limited to damages. Under no circumstances shall the liability of the Company exceed the Price of the Services.

18.5 The Customer shall not set off against the Price amounts due from the Company.

18.6 The Company may license or sub-contract all or any part of its rights and obligations without the Customer’s consent.

18.7 The Company reserves the right to review these terms and conditions at any time and from time to time. If, following any such review, there is to be any change in such terms and conditions, that change will take effect from the date on which the Company notifi es the Customer of such change.

18.8 Neither party shall be liable for any default due to any act of God, war, terrorism, strike, lock out, industrial action, fi re, fl ood, drought, storm or other event beyond the reasonable control of either party.

Terms & ConditionsTM


Eltech Industries 8 Industry Court (P.O. Box 84)Lilydale, VIC, 3140, Australia

Phone: (+61 3 ) 9737 2100Fax: (+61 3) 9735 4588Toll free: 1800 007 458

General Enquiriessales@eltechindustries.com.auwww.eltechindustries.com.au

“Committed to Service”

SUPPLIERS OF SPECIALISED HARDWARE & TOOLING TO THE INDUSTRIAL ELECTRICAL & AUTOMATION INDUSTRIES

Documents

Industrial Cables