Upload
joseph-pope
View
226
Download
0
Tags:
Embed Size (px)
Citation preview
INDUSTRIAL MATERIALS
Instructed by: Dr. Sajid Zaidi
PhD in Advanced Mechanics, UTC, France
MS in Advanced Mechanics, UTC, France
B.Sc. in Mechanical Engineering, UET, Lahore
B.TECH Mechanical TechnologyIQRA COLLEGE OF TECHNOLOGY (ICT)INTERNATIONAL ISLAMIC UNIVERSITY, ISLAMABAD
Formation of AlloysIN
DU
ST
RIA
L M
AT
ER
IAL
S
For most manufacturing applications, metals are not used in their pure form.
Engineering materials tend to be ALLOYS, materials composed of two or more different elements, and they tend to exhibit their own characteristic properties.
An ‘‘alloy’’ can also be defined as a material that exhibits properties of a metallic material and is made from multiple elements.
There are different ways in which a metal might respond to the addition of another element.
The most popular way is when the two elements exhibit some degree of solubility in the solid state. The two materials form a SOLID SOLUTION, where the ALLOY ELEMENT dissolves in the BASE METAL.
Formation of AlloysIN
DU
ST
RIA
L M
AT
ER
IAL
S
The solid solution can be◦ Substitutional or Interstitial
In the substitutional solutions, some atoms of the alloy elements occupy lattice sites normally filled by atoms of the base metal. The replacement is totally random in nature, with the alloy atoms being distributed throughout the base lattice.
In the interstitial solutions, the alloy element atoms squeeze into the empty spaces between the atoms of the base metal lattice.
Substitutional Interstitial
PhasesAlloys can be classified as:
◦ Single – Phase Alloys◦ Multiple – Phase Alloys
A phase can be defined as a homogeneous portion of a system that has uniform physical and chemical characteristics.
A phase has the following characteristics:◦ same structure or atomic arrangement throughout◦ roughly the same composition and properties
throughout◦ definite interface between the phase and any
surrounding or adjoining phases.
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
PhasesWater has three phases:
liquid water, solid ice, and steam.Phases do not always have
to be solid, liquid, and gaseous forms
of a material.An element, such as iron (Fe), can exist in FCC and
BCC crystal structures. These two solid forms of iron are two different phases of iron that will be stable at different temperatures and pressure conditions.
Similarly, ice, itself, can exist in several crystal structures.
Carbon can exist in many forms (e.g., graphite or diamond). These are only two of the many possible phases of carbon.
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Phase Rule Josiah Willard Gibbs developed the phase rule in 1875–
1876. It describes the relationship between the number of components and the number of phases for a given system and the conditions that may be allowed to change (e.g., temperature, pressure, etc.)
The general form of Phase Rule is:
2 + C = F + P
C = number of chemically independent components
F = number of degrees of freedom
P = number of phases present
2 = both temperature and pressure are allowed to change
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Phase RuleIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Unary phase diagramMelting pointBoiling pointPhase Rule
◦ Point A
◦ Point B
◦ Point X
Triple Point (point X)Condition of sublimeP-T diagram
Schematic unary phase diagramfor magnesium
How much of each material or component we can combine without producing an additional phase i.e., the solubility of one material into another (e.g., sugar in water, copper in nickel, phosphorus in silicon, etc.).
SolubilityIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Unlimited Solubility Limited Solubility No Solubility
Water and Alcohol have unlimited solubility and when combined only one phase is produced.
Similarly, if we were to mix any amounts of liquid copper and liquid nickel, only one liquid phase would be produced. This liquid alloy has the same composition and properties everywhere, because nickel and copper have unlimited liquid solubility.
Unlimited SolubilityIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
If the liquid copper-nickel alloy solidifies and cools to room temperature while maintaining thermal equilibrium, only one solid phase is produced. After solidification, the copper and nickel atoms do not separate but, instead, are randomly located within the FCC crystal structure. Within the solid phase, the structure, properties, and composition are uniform and no interface exists between the copper and nickel atoms. Therefore, copper and nickel also have unlimited solid solubility. The solid phase is a solid solution of copper and nickel.
Unlimited SolubilityIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
A solid solution is not a mixture. A mixture contains more than one type of phase whose characteristics are retained when the mixture is formed. In contrast to this, the components of a solid solution completely dissolve in one another and do not retain their individual characteristics.
Conditions of Unlimited Solubility
In order for an alloy system to have unlimited solid solubility, certain conditions must be satisfied. These conditions, the Hume-Rothery rules, are as follows:
Size factor: The atoms or ions must be of similar size, with no more than a 15% difference in atomic radius, in order to minimize the lattice strain
Unlimited SolubilityIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Crystal structure: The materials must have the same crystal structure; otherwise, there is some point at which a transition occurs from one phase to a second phase with a different structure.
Valence: The ions must have the same valence; otherwise, the valence electron difference encourages the formation of compounds rather than solutions.
Electronegativity: The atoms must have approximately the same electronegativity. Electronegativity is the affinity for electrons. If the electronegativities differ significantly, compounds form as when sodium and chlorine atoms combine to form sodium chloride.
Unlimited SolubilityIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Salt or sugar have a limited solubility in water. If we add a small amount of liquid zinc to liquid copper, a
single liquid solution is produced. When that copper-zinc solution cools and solidifies, a single solid solution having an FCC structure results, with copper and zinc atoms randomly located at the normal lattice points.
However, during the solidification of the liquid solution containing more than about 30% Zn, some of the excess zinc atoms combine with some of the copper atoms to form a CuZn compound.
Two solid phases now coexist: a solid solution ofcopper saturated with about 30% Zn plus a CuZn
compound.The solubility of zinc in copper is limited.
Limited SolubilityIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Limited SolubilityIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
In metallic materials, one of the important effects of solid-solution formation is the resultant solid-solution strengthening.
This strengthening is caused by increased resistance to dislocation motion.
This is one of the important reasons why brass (Cu-Zn alloy) is stronger than pure copper.
Similarly small levels of carbon strengthen iron. Jewelry could be made out of pure gold or silver.
However, pure gold and pure silver are extremely soft and malleable and the jewelry pieces made will not retain their shape. That’s why jewelers add copper to gold or silver.
Solid – Solution Strengthening
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Solid – Solution StrengtheningIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
The effects of severalalloying elements on theyield strength of copper.Nickel and zinc atoms areabout the same size ascopper atoms, but berylliumand tin atoms are muchdifferent from copperatoms. Increasing bothatomic size difference andamount of alloying elementincreases solid-solutionStrengthening.
Degree of Solid-Solution Strengthening
The degree of solid-solution strengthening depends on two factors.
First, a large difference in atomic size between the original (host or solvent) atom and the added (guest or solute) atom increases the strengthening effect.
A larger size difference produces a greater disruption of the initial crystal structure, making slip more difficult.
Second, the greater the amount of alloying element added, the greater the strengthening effect. A Cu-20% Ni alloy is stronger than a Cu-10% Ni alloy.
Solid – Solution Strengthening
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Effect of Solid-Solution Strengthening on Properties
The yield strength, tensile strength, and hardness of alloys are greater than those of the pure metals. For example, small concentrations of Mg are added to aluminum to provide higher strength to the aluminum alloys used in making aluminum beverage cans.
Almost always, the ductility of the alloy is less than that of the pure metal. Only rarely, as in copper-zinc alloys, does solid-solution strengthening increase both strength and ductility.
Solid – Solution Strengthening
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Effect of Solid-Solution Strengthening on Properties
Electrical conductivity of the alloy is much lower than that of the pure metal. This is because electrons get more scattered off the atoms of the alloying elements. Solid-solution strengthening of copper or aluminum wires used for transmission of electrical power is not recommended because of this pronounced effect. Electrical conductivity of many alloys, although lower than that of pure metals, is often more stable as a function of temperature.
The resistance to creep, or loss of strength at elevated temperatures, is improved by solid-solution strengthening. High temperatures do not cause a catastrophic change in the properties of solid-solution-strengthened alloys. Many high-temperature alloys, such as those used for jet engines, rely partly on extensive solid-solution strengthening.
Solid – Solution StrengtheningIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Solid – Solution Strengthening
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
The effect of additions of zinc to copper on the properties of the solid-solution strengthenedAlloy.
A phase diagram shows the phases and their compositions at any combination of temperature and alloy composition.
When only two elements or two compounds are present in a material, a binary phase diagram can be constructed.
Isomorphous binary phase diagrams are found in a number of metallic and ceramic systems. In the isomorphous systems, which include the copper-nickel systems, only one solid phase forms; the two components in the system display complete solid solubility.
In phase diagram, x-axis represents mole%, weight%, atomic% or mole fraction of one of the components. The y-axis represents the temperature.
A ternary phase diagram is a phase diagram for systems consisting of three components.
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Transition in structure appear as characteristic points in the temperature – time plot of the cooling history, known as cooling curve. It is obtained when a fixed composition material is heated and subsequently cooled at a uniformly slow rate
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Liquidus
Cooling curves for Cu-Ni alloy form different Ni composition
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Liquidus temperature is the
temperature above which a material
is completely liquid. The upper
curve represents the liquidus
temperatures for copper-nickel
alloys for different compositions.We must heat an alloy above
the liquidus temperature to produce
a completely liquid alloy that can
then be cast into a useful shape. The
liquid alloy begins to solidify when the temperature
decreases to the liquidus temperature. For the Cu-40%Ni
alloy in figure the liquidus temperature is 1280ºC.
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Solidus temperature is the
temperature below which the alloy
is 100% solid. The lower curve in
figure represents the solidus
temperatures for Cu-Ni alloys for
different compositions.An alloy is not completely solid
until the material cools below the
solidus temperature. If we use a copper-nickel alloy at high temperatures, we
must be sure that the service temperature is below the solidus so that no melting occurs. For the Cu-40% Ni alloy in figure, the solidus temperature is 1240ºC.
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Alloys melt and freeze over a
range of temperatures between the
liquidus and the solidus. The
temperature difference between the
liquidus and the solidus is the
freezing range of the alloy.Within the freezing range, two
phases coexist: a liquid and a solid.
For Cu-Ni, the solid is a solution of
copper and nickel atoms and is designated as the α phase.For the Cu-40% Ni alloy in figure, the freezing range is
1280 – 1240 = 40ºC. Note that pure metals solidify at a fixed temperature i.e.,
the freezing range is zero degrees.
Often we are interested to know the phases present in an alloy at a particular temperature.
If we plan to make a casting, we must be sure that the metal is initially all liquid.
If we plan to heat treat an alloy component, we must be sure that no liquid forms during the process.
Different solid phases have different properties. For example, BCC Fe (indicated as α phase on the iron carbon phase diagram) is magnetic. However, FCC iron (indicated as γ phase on the Fe-C diagram) is not.
The phase diagram can be treated as a road map; if we know the temperature and alloy composition we can determine the phases present.
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
From the phase diagram for the NiO-MgO binary system [figure below], describe a composition that can melt at 2600ºC but will not melt when placed into service at 2300ºC. Often we are interested to know the phases present in an alloy at a particular temperature.
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
One method to improve the
fracture toughness of a ceramic
material is to reinforce the
ceramic matrix with ceramic
fibers. A materials designer has
suggested that Al2O3 could be
reinforced with 25% Cr2O3 fibers, which would interfere
with the propagation of any cracks in the alumina. The
resulting composite is expected to operate under load at
2000ºC for several months. Criticize the appropriateness of
this design.
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Gibbs Rule for Isomorphous Phase Diagram
We keep the pressure fixed (e.g., one atmosphere), which is normal for binary phase diagrams.
The phase rule can be rewritten as:
1 + C = F + P (for constant pressure)Determine the degrees of freedom in a Cu-40% Ni alloy
at (a) 1300ºC, (b) 1250ºC, and (c) 1200ºC.◦ At 1300ºC, P = 1, C = 2,
1 + C = F + P → F = 2
◦ At 1250ºC, P = 2, C = 2,
1 + C = F + P → F = 1
◦ At 1200ºC, P = 1, C = 2,
1 + C = F + P → F = 2
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Gibbs Rule for Isomorphous Phase Diagram
As there is only one degree of freedom in a two-phase region of a binary phase diagram, the compositions of the two phases are always fixed when we specify the temperature. Therefore, we can use a tie line to determine the composition of the two phases.
A tie line is a horizontal line
within a two-phase region drawn at
the temperature of interest (see
figure). In an isomorphous system,
the tie line connects the liquidus and
solidus points at the specified
temperature. The ends of the tie line
represent the compositions of the
two phases in equilibrium. Tie lines are not used in
single-phase regions because we do not have two phases to ‘‘tie’’ in.
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Use of Tie Line
Determine the
composition of each
phase in a Cu-40% Ni
alloy at 1300ºC,
1270ºC, 1250ºC, and
1200ºC (see fig.).
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Lever Rule (amount of each phase)
To calculate the amounts of liquid and solid, we construct a lever on our tie line, with the fulcrum of our lever being the original composition of the alloy. The leg of the lever opposite to the composition of the phase, whose amount we are calculating, is divided by the total length of the lever to give the amount of that phase.
The lever rule in general can be written as:
Phase percent = opposite arm of lever x 100
total length of tie line
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Lever Rule (amount of each phase)
Fraction of the solid phase = (Wo – Wl)/(Ws-Wl)
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Lever Rule (amount of each phase)
Determine the amount of each phase in the Cu-40% Ni alloy at 1300ºC, 1270ºC, 1250ºC, and 1200ºC.
at 1300ºC: There is only one phase, so 100% L.
at 1270ºC: %L = 50 – 40 x 100 = 77%
50 – 37
%α = 40 – 37 x 100 = 23%
50 – 37
Phase DiagramIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
EutecticA eutectic or eutectic mixture is a mixture of two or more
phases at a composition that has the lowest melting point. It is where the phases simultaneously crystallize from
molten solution. The proper ratios of phases to obtain a eutectic is
identified by the eutectic point on a binary phase diagram.The eutectic point is the point where the liquid phase
borders directly on the solid (α + β) phase.
Eutectic point
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
The eutectic point represents the minimum melting temperature of any possible A-B alloy.
The temperature that corresponds to this point is known as the eutectic temperature.
Not all binary system alloys have a eutectic point: those that form a solid solution at all concentrations, such as the Cu-Ni system, have no eutectic.
An alloy system that has a eutectic is often referred to as a eutectic system, or eutectic alloy.
EutecticIN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Binary – Eutectic Phase Diagram
Cu – A
g Ectectic Phase
Diagram
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Binary – Eutectic Phase Diagram
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Cu –Ag Eutectic Phase DiagramThree single-phase regions can be found on the diagram:
α, β, and liquid.The α phase is a solid solution rich in copper; it has silver
as the solute component and an FCC crystal structure.The β phase solid solution also has an FCC structure, but
copper is the solute.No liquid below TE
CE is the composition at TE
The intersection of CE and TE is called the
eutectic point. If the alloy has the eutectic
composition, it will simultaneously crystallize from molten
solution i.e., without having any freezing range.
Cooling curve of a eutectic alloy
Binary – Eutectic Phase Diagram
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Cu –Ag Eutectic Phase DiagramThe solubility in each of the solid phases is limited.The solubility limit for the α phase corresponds to the
boundary line, CBA, between the α/(α+β) and α/(α+L) phase regions.
It increases with temperature to a maximum [8.0 wt% Ag at 779ºC] at point B, and decreases back to zero at the melting temperature of pure copper, point A [1085ºC].
At temperatures below 779ºC, the solid solubility limit line separating the α and α+β phase regions is termed as solvus line (CB).
The boundary AB between the α and α+L regions is the solidus line.
Binary – Eutectic Phase Diagram
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Cu –Ag Eutectic Phase DiagramFor the β phase, both solvus and solidus lines also exist,
HG and GF, respectively. There are also three two-phase regions found for the
copper–silver system: α+L, β+L, and α+β.The α and β phase solid solutions coexist for all
compositions and temperatures within the α+β phase field.
The α+liquid and β+liquid phases also coexist in their respective phase regions.
An important reaction occurs for an alloy of composition CE as it changes temperature in passing through TE; this reaction may be written as follows:
Binary – Eutectic Phase Diagram
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Cu –Ag Eutectic Phase DiagramUpon cooling, a liquid phase is transformed into the two
solid α and β phases at the temperature TE; the opposite reaction occurs upon heating. This is called a eutectic reaction; CαE and CβE are the respective compositions of the α and β phases at TE. Thus, for the copper–silver system, the eutectic reaction may be written as follows:
The eutectic reaction, upon cooling, is similar to solidification for pure components, however, the solid product of eutectic solidification is always two solid phases, whereas for a pure component only a single phase forms.
Binary – Eutectic Phase Diagram
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Pb –Sn Eutectic Phase Diagram
L+ aL+b
a + b
200
T(°C)
18.3
C, wt% Sn20 60 80 1000
300
100
L (liquid)
a183°C
61.9 97.8
b
• For a 40 wt% Sn-60 wt% Pb alloy at 150°C, determine: -- the phases present Pb-Sn
system
(Ex) Pb-Sn Eutectic System
Answer: a + b-- the phase compositions
-- the relative amount of each phase 150
40C0
11C
99C
Answer: Ca = 11 wt% Sn Cb = 99 wt% Sn
W
=C - C0
C - C
= 99 - 4099 - 11
= 5988
= 0.67
W
C0 - C
C - C=
=2988
= 0.33=40 - 1199 - 11
Answer:
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
Answer: Ca = 17 wt% Sn
-- the phase compositions
L+b
a + b
200
T(°C)
C, wt% Sn20 60 80 1000
300
100
L (liquid)
a b
L+ a
183°C
• For a 40 wt% Sn-60 wt% Pb alloy at 220°C, determine: -- the phases present:
(Ex contd. )
-- the relative amount of each phase
Wa=CL - C0
CL - C=
46 - 40
46 - 17
= 6
29 = 0.21
WL =C0 - C
CL - C=
23
29 = 0.79
40C0
46CL
17C
220
Answer: a + L
CL = 46 wt% Sn
Answer:
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
(Ex contd.)IN
DU
ST
RIA
L M
AT
ER
IAL
SFo
rmat
ion
of A
lloy
s
Determine (a) the solubility of tin in solid lead at 100ºC, (b) the maximum solubility of lead in solid tin, (c) the amount of β that forms if a Pb-10% Sn alloy is cooled to 0ºC.
(a) Determine the amount and composition of each phase in a lead-tin alloy of eutectic composition. (b) Calculate the mass of phases present. (c) Calculate the amount of lead and tin in each phase, assuming you have 200 g of the alloy.
Hypoeutectic and Hypereutectic Alloys
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
A hypoeutectic alloy is an alloy whose composition will be between that of the left-hand-side end of the tie line defining the eutectic reaction and the eutectic composition. As a hypoeutectic alloy cools, the liquid begins to solidify at the liquidus temperature, producing solid α. However, solidification is completed only after going through the eutectic reaction.
An alloy composition between that of the right-hand-side end of the tie line defining the eutectic reaction and the eutectic composition is known as a hypereutectic alloy.
Hypoeutectic and Hypereutectic Alloys
IND
US
TR
IAL
MA
TE
RIA
LS
Form
atio
n of
All
oys
The cooling curve for a hypoeutectic Pb-30% Sn alloy