Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
PoE Switch
Media Converter with PoE
Industrial PoE Product Family
Industrial Product DM
Communication exTension Conversion
Regulated IEEE 1588V2
EN50121-4UL60950-1 u-Ring IEEE 1588v2NEMA TS2 SmartViewEN61000-6-2EN61000-6-4
Negativevoltage
CTC Union provides a variety of PoE products, ranging from injectors, converters to managed switches to fulfill different application
needs. All industrial PoE models are fanless and designed in robust IP30 housings that make them ideal for din rail installation or wall
mounting.
Additionally, PoE models all support IEEE 802.3af/802.3at standards which are able to provide up to 30W power per port. With power
boost and regulation technology, PoE devices can offer 24/48V DC input range to provide the required PoE output voltage for IEEE
802.3at.
• Redundant dual input power, 24/48VDC(20~57VDC)• Very high efficiency boost (94%~97%) technology• Regulated output voltage for PoE/PoE+ output, 4KV surge protection for PoE port• Supports negative voltage power input with isolated RS-232 console port (for example in telecom system)• 2.25K VDC Hi-pot isolation protection for Ethernet ports and power• Advance PoE management, PoE PD Auto check/reset when PD fail, PoE on/off weekly scheduling• SmartConfigTM for quick & easy mass configuration• SmartViewTM for centralized management• u-Ring (up-to 5 rings) for redundancy cabling• SNMP, Web, Telnet, CLI, IPV6, DHCP, RMON, MIB II, QoS, CoS, ACL,Security, IGMP, VLAN, LACP, IEEE1588 V2
Features
Model Managed TotalPort
RJ45 Port Fiber Port PoE PortRedundant Input Power
Certification
10/100Base-TX
10/100/1000Base-T
100/1000Base-X
IEEE802.3at( budget)
IEEE802.3bt( budget)
RailwayEN50121-4
TrafficNEMA TS2
SafetyUL60950-1
EN61000-6-2EN61000-6-4
CE, FCC
IGS-402SM-4PH24 6 4 2 SFP 4 (120W) 24/48V DC
IGS+402SM-4PH24 6 4 2 SFP 4 (120W) 24/48/-48V DC
IGS-402SM-4PU 6 4 2 SFP 4 (240W) 48/-48V DC
IGS-803SM-8PH24 11 8 3 SFP 8 (180W) 24/48V DC
IGS+803SM-8PH24 11 8 3 SFP 8 (180W) 24/48/-48V DC
IGS-1608SM-8PH 24 16 8 SFP 8(240W) 48, -48V DC
IFS-402GSM-4PH24 6 4 2 SFP 4 (120W) 24/48V DC
IGS-402SM-4PU 6 4 2 SFP 4 (240W) 48/-48V DC
IFS-803GSM-8PH24 11 8 3 SFP 8 (180W) 24/48V DC
IFS-1608GSM-8PH 24 16 8 SFP 8(240W) 48, -48V DC
Features• Redundant dual input power, 12/24/48VDC(10~57VDC)
• Regulated output voltage for PoE/PoE+ output
• Very high efficiency boost (94%~97%) technology
• Bandwidth control, VLAN, Remote loop back test
• PoE configuration and monitor
• SmartViewTM for centralized management
• Web, SNMP, In-band for management
Model ManagedRJ45 Port Fiber Port PoE Port
Redundant Input Power
Certification10/100
Base-TX10/100/1000
Base-T100
Base-FX100/1000Base-X
IEEE802.3at( budget)
RailwayEN50121-4
EN61000-6-2EN61000-6-4 CE, FCC
IMC-1000MS-PH12 1 1 SFP 1 (30W) 12/24/48V DC
IMC-1000S-PH12 1 1 SFP 1 (30W) 12/24/48V DC
IMC-100-PH12 1 1 SC/ST 1 (30W) 12/24/48V DC
PoE Extender
Industrial PoE Injector
• IEEE 802.3at/af PoE Injector
• Power output 15.4W, 30W, 36W, 60W, 72W select by DIP SW
• Redundant dual input power, 24/48VDC (20~57VDC)
• Very high efficiency boost (94%~97%) technology (INJ-IG60-24)
• Regulated voltage at 55VDC for PoE output (INJ-IG60-24)
• PoE Mode A/B Select by DIP SW
• 4 Pairs (60W/72W) PD handshake mode select by DIP SW (Such as AXIS® IP cam)
Features
Features
• Long transmission data and power feeding distance up to 1200 meter
• Complies with IEEEE 802.3at PoE
• Simultaneous transmission of Ethernet data and PoE Power over Phone line wire or coaxial cable
ModelRJ45 UTP Long distance extended
Redundant Input Power
Certification10/100
Base-TXIEEE802.3at PoE(Power budget)
RJ11(2 wire) Coaxial Railway EN50121-4 EN61000-6-2
EN61000-6-4 CE, FCC
IEXT221-PH 1 1 (30W) 1 1 48V DC
IEXT224-4PH 4 4(30W) 1 1 48V DC
ModelLAN RJ45 Port PoE RJ45 Port Power Input Certification
10/100/1000Base-T(X)
10/100/1000 Base-T(X)
PoE 15.4W/30W/36W/60W Redundant Single Power EN61000-6-2
EN61000-6-4 EN50121-4 CE/FCC
INJ-IG60-24 24/48V DC
INJ-IG01-PH 48V DC
Key FeaturesHigh efficiency boosttechnology for PoE
• Regulated PoE output voltage to stabilize PoE device
• Guaranteed delivery of PoE power distance to 100meter
• Wide range input power 24/48VDC (20~57VDC)
• Built-in very high efficiency (94~97%) to boost PoE
output voltage
CTC Union
DC Boost & Regulate
NarrowPower Input Range
(48VDC)
Wide Power Input Range(24/48VDC)
57V
20V
57V
44VNon-DC Boost & Regulate
Stable Voltage
55V
Regulated PoE Output
Wireless AP
IP Camera
Wireless AP
IP Camera
VSUnstable VoltageOther Vendors
Copper/CoaxialRemote Power Feeding
SimultaneouslyData Power
IEEE802.3at +
Ethernet PoEData
PowerIP Cam
Display
Outdoor AP(Don’t need power supply)
Figure 1 : Remote Power feeding Enable
Local IEXT-221-PH-L
Local Power
Remote IEXT-221-PH-R
Ethernet
Welcome to CTCUMaximum 30W PoE power budget
Ethernet
48VDC power supply
Remote Power Feeding Enable
www.ctcu.comCTC UNION TECHNOLOGIES CO., LTD.8F, No.60, Zhouzi St. Neihu, Taipei 114, Taiwan TEL : +886 2 2659-1021 FAX : +886 2 2659-0237 [email protected]
R
03/2017 V1.0
Copyright 2017 CTC UNION TECHNOLOGIES CO., LTD.CTC UNION and the CTC UNION logo are trademarks of CTC UNION TECHNOLOGIES CO., LTD. All rights reserved. All other trademarks are the property of their respective owners.Specifications & design are subject to change without prior notice. Please visit CTC UNION website for more details.
Weekly PoE ON/OFF Scheduling• Offer weekly PoE ON/OFF scheduling function to provide PoE to PDs
• Reduce operational expenses.
Port 108:00
08:30
09:00
09:30
10:00
10:30
11:00
11:3012:00
SUN. MON. TUE. WED. THU. FRI. SAT.
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Scheduling
Remote PD Auto Test & Reset
Our PoE Switch can regularly send test packets to the connected PD devices so that users can know the real-time condition of the remote PD devices without paying on-site visits.
If PoE Switch does not receive responses from the connected PD devices for a certain period,
the PoE switch can initiate a reset action automatically to power down and power up the connected PD devices.
• PoE PD failure auto checking, and auto reset when PD fail.
• The feature helps to reduce operational expenses.
PD Status is Good
1Step
PD Status Good! PD PoE Camera
Testing Request
Testing Echo
Reset PD
3Step
PD Alive!
PoE
PowerON
PowerOFF
No Response from PD
2Step
No Response...
Testing Request
PoE Application
City Security
Bus Stop & E-Bus
Car Park Security ETC
Intelligent Highway Transportation
Intelligent Tunnel Transportation