Upload
others
View
21
Download
0
Embed Size (px)
Citation preview
P. van Toi 10-01-2020
ITIS BV Columbusweg 64 NL-4462 HB Goes T +31 113568515 [email protected] www.itis-nl.com
Test certificate: 201900076-CQ02
ISO 15848-1 QUALIFICATION CERTIFICATE
Industrie Service
This certificate is to certify that the valve below has passed the fugitive emission requirements according to standard: Industrial valves - Measurement, test and qualification procedures for fugitive
emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015).
Test valve details Manufacturer Address Nominal size Pressure rating Type Valve design Drawing number Body material Stem material Gearbox
ERIKS Flow Control Cypresbaan 63, 2908 LT Capell aJd Ijssel, the Netherlands 1-1/2" / DN40 Class 600 Ball valve EN 12516-1 B37624 rev.C date: 20-12-2016 A351 CF8M AISI316 n.a.
pt Stem Seal Material a-ring Viton a-ring Viton
2nd Stem Seal Material R-PTFE R-PTFE
Stem Diameter (ODstem) 20mm 10mm up to 40mm
Stem motion Quarter turn Quarter turn
Body gaskets R-PTFE R-PTFE
Pressure Class Class 600 Class 600 and below
Endurance Class Cal Cal
Temperature Class tRT 5°C to 40°C
Tightness Class AH AH or less severe
Performance class: ISO FE AH - COI - SSA O - tRT - Class 600 - ISO 15848-1
This certificate refers to the above mentioned test valve. This certíñcate does not imply assessment of the production of the valves. This certificate is only valid in conjunction with the full ITIS BV test report number
201900076-R004.
I, Indu,:,ial iesting il. /,.;. =_ o Inspection 5€rV!C!!. ~
P. van Tal
ms BV Columbusweg 64 NL-4462 HB Goes T +31 113568515 [email protected] www.itis-nl.com
Test certificate: 201900076-CQOl
Industrie Service
ISO 15848-1 QUALIFICATION CERTIFICATE
This certificate is to certify that the valve below has passed the fugitive emission requirements according to standard: Industrial valves - Measurement, test and qualification procedures for fugitive
emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015).
Test valve details Manufacturer Address Nominal size Pressure rating Type Valve design Drawing number Body material Stem material Gearbox
ERIKS Flow Control Cypresbaan 63, 2908 LT Capell aJd Ijssel, the Netherlands 1-1/2" / DN40 Class 600 Ball valve EN 12516-1 B37624 rev.C date: 20-12-2016 A351 CF8M AISI316 n.a.
1 st Stem Seal Material a-ring Viton a-ring Viton
2nd Stem Seal Material R-PTFE R-PTFE
Stem Diameter (ODstem) 20mm 10mm up to 40mm
Stem motion Quarter turn Quarter turn
Body gaskets R-PTFE R-PTFE
Pressure Class Class 600 Class 600 and below
Endurance Class C03 C03 or less severe
Temperature Class tRT 5°C to 40°C
Tightness Class BH BH or less severe
Peñormance class: ISO FE BH - C03 - SSA O - tRT - Class 600 -ISO 15848-1
This certificate refers to the above mentioned test valve. This certificate does not imply assessment of the production of the valves. This certificate is only valid in conjunction with the full ITIS BV test report number
20 1900076-R003.
10-01-2020
Name Authority (TÜV SÜD)
P. van Tal
ITIS BV Columbusweg 64 NL-4462 HB Goes T +31 113568515 [email protected] www.itis-nl.com
Test certificate: 201900076-C004
Industrie Service
CERTIFICATE OF TESTING This certificate is to certify that the measured leak rates during the endurance test on the test valve below, were within the limits according to the requirements of TA LUFT (Technische Anleitung zur
Luft par. 5.2.6.4) Vom 24. Juli 2002 and VDI 2440 par. 3.3.1.3 November 2000, for 205 cycles at room temperature.
Test valve details Manufacturer Address Nominal size Pressure rating Type Valve design Drawing number Body material Stem material Stem seal material 1st Stem seal material 2nd Gland nut material Gland torque
ERIKS Flow Control Cypresbaan 63, 2908 LT Capell ajd Ijssel, the Netherlands 1-1/2" / DN40 Class 600 Ball valve EN 12516-1 B37624 rev.C date: 20-12-2016 A351 CF8M AISI316 O-ring Viton 70 GLT (brand: Chang Haring Rubber Co., Ltd) R-PTFE, FLON3010 (brand: Hontech) A194 Gr.8 20Nm
Stem motion
Stem (21 / Stem circumference 20mm / 62.8mm
Quarter turn
Valve size 1-1/2" / DN40
Test temperatures
Pressure Class Class 600
205 cycles Operational cycles
No thermal cycles Thermal cycles
16Nm
This certificate refers to the above mentioned test valve. This certî1iicate does not imply assessment of the production of the valves. This certificate may not be reproduced in whole or in part, without written approval of ITIS B.V. This certificate is only valid in conjunction with the full ITIS BV test report number 201900076-R006.
Maximum operation torque
Indust"j;:1 ic:sting & Inspection Services
10-01-2020
pproved signatory
ECON Premium FE-Test Certificate ISO 15848-1 CO3.pdfECON Premium FE-Test Certificate TA-Luft_RT.pdf