USA: +1 800.337.9423 +1 513.831.3211 • Belgium: +32 (0)13 53 95 47 • Germany: +49 (0)6551 9606.0 Middle East: +962-6-5662481 • Canada: +1 800.337.9423 X501 • Latin America: +52 (81)10 97 0445 • www.coldjet.com CLEANING METHOD NO SECONDARY WASTE NON- CONDUCTIVE NON-TOXIC* NON- ABRASIVE Dry Ice Blasting • • • • Sand Blasting • • Soda Blasting • • Water Blasting • • Hand Tools • • Solvents/Chemicals • Upon contact, traditional blasting materials become contaminated when used to clean hazardous substances and objects. These blasting materials are then classified as toxic waste and require appropriate safe disposal. * Cold Jet vs traditional cleaning methods. * * * Industry Overview: Foundry and Forging Reduced cleaning time = less downtime A Faster, More Productive Clean. A major issue for the foundry and forging industries is the downtime caused when cleaning permanent aluminum molds, core box vents, semi-solid castings and die casting machines. Typical manual cleaning methods require cool down, disassembly, unproductive hours of messy hand cleaning or bead blast cleaning, and then reassembly. In addition, most traditional cleaning methods are not fully effective and often result in damage to the part or equipment. Dry ice blasting offers significant improvement in cleaning times (up to 60%) as well as reduction of damage to equipment and resulting scrap product. As dry ice blasting allows a non-conductive, in-place method to clean parts, even touch- up cleanings are safe and easy. • Permanent Aluminum Molds • Refractory Coatings • Core Boxes and Vents • Die Cast Tooling • Shell Core Molds • Semi-solid Castings / Forging • Remove Resins & Release Agents • General Equipment & Facility • Conveyors • General part cleaning • Reduce production downtime • Eliminate disassembly of molds • Clean better, hot and in-place • Eliminate waste disposal cost • Increase production time • Non-abrasive, no damage to tooling • Environmentally responsible • Delivers superior as-cast finish KEY BENEFITS REFERENCES APPLICATIONS Join industry leaders already benefitting from Cold Jet dry ice blast cleaning systems. Discover Cold Jet. Contact Cold Jet today to speak with an industry expert and choose the best cleaning solution for your application. Call 1.800.337.9423 or visit us online at www.coldjet.com to learn more. Before After

Industry Overview: Foundry and Forging€¦ · Cold Jet vs traditional cleaning methods. * * * Industry Overview: Foundry and Forging Reduced cleaning time = less downtime A Faster,

Download PDF Report

Upload
others
View
13
Download
0

Embed Size (px)

Citation preview

CLEANING METHOD

NO SECONDARY

WASTE

NON-CONDUCTIVE NON-TOXIC* NON-

ABRASIVE

Dry Ice Blasting • • • •Sand Blasting • •Soda Blasting • •Water Blasting • •

Hand Tools • •Solvents/Chemicals •Upon contact, traditional blasting materials become contaminated when used to clean hazardous substances and objects. These blasting materials are then classified as toxic waste and require appropriate safe disposal.

Cold Jet vs traditional cleaning methods.

Industry Overview: Foundry and ForgingReduced cleaning time = less downtime

A Faster, MoreProductive Clean.A major issue for the foundry and

forging industries is the downtime caused when cleaning permanent aluminum molds, core box vents, semi-solid castings and die casting machines. Typical manual cleaning methods require cool down, disassembly, unproductive hours of messy hand cleaning or bead blast cleaning, and then reassembly. In addition, most traditional cleaning methods are not fully effective and often result in damage to the part

or equipment.

Dry ice blasting offers significant improvement in cleaning times (up to 60%) as well as reduction of damage to equipment and resulting scrap product. As dry ice blasting allows a non-conductive, in-place method to clean parts, even touch-up cleanings are safe and easy.

• Permanent Aluminum Molds• Refractory Coatings• Core Boxes and Vents• Die Cast Tooling• Shell Core Molds• Semi-solid Castings / Forging• Remove Resins & Release Agents• General Equipment & Facility• Conveyors• General part cleaning

• Reduce production downtime

• Eliminate disassembly of molds

• Clean better, hot and in-place

• Eliminate waste disposal cost

• Increase production time

• Non-abrasive, no damage to tooling

• Environmentally responsible

• Delivers superior as-cast finish

KEY BENEFITS

REFERENCES

APPLICATIONS

Join industry leaders already benefitting from Cold Jet dry ice blast cleaning systems.Discover Cold Jet.

Contact Cold Jet today to speak with an industry expert and choose the best cleaning solution for your application. Call 1.800.337.9423 or visit us online at www.coldjet.com to learn more.

Before

After

R 78, G 97, B 114

R 0, G 53, B 150

R 0, G 118, B 204