Embed Size (px)
Citation preview
144 Components and Spare Parts see pages 228 to 236
Screwdriver BitsIngenious Tools
6
HAZET Screwdriver Bits and AccessoriesSpecial steel for excessive use
High-precision, close-tolerance fabrication of tips and edges
Always the correct profile:
K L M b N O P W X S U
For electric and pneumatic screw driving toolsas well as for manual operation
HAZET Screwdriver Bits and Accessories
Screwdriver Bits Screwdriver Bits
• For slotted screws• g 8 = 5⁄16”• DIN 3127-C 8, ISO 2351
1 G D K 42210- 8 0,8 5,5 41 0144772210- 9 1,0 5,5 41 0144842210-10 1,2 6,5 41 0144222210-11 1,2 8,0 41 0144392210-12 1,6 8,0 41 0144462210-13 1,6 10,0 41 0144532210-14 2,0 12,0 41 014460
• For screws with internal serration (XZN)• g 6.3 = 1⁄4”• DIN 65254
1 & K 42211-4 4 25 0563922211-5 5 25 056408
• For screws with internal serration (XZN)• g 8 = 5⁄16”• DIN 65254
1 & K 42212- 6 6 35 0564152212- 8 8 35 0564222212-10 10 35 056439
Y
• For TRI-WING® screws• g 6.3 = 1⁄4”
1 42213-0 0787212213-1 0787382213-2 0787452213-3 078752
B
1 42213-4 0787692213-5 0787762213-6 078783
• For Phillips-Recess screws PH• Tough-hard for threaded screws• g 6.3 = 1⁄4”• DIN 3128-C 6.3
+ = reinforced design
1 K 42215-PH 1 25 0144912215-PH 2 25 0145212215-PH 3 + 25 0145692215-PH 4 + 32 014583very hard,e.g. for sheet metal screws
2215-PH 1 a 25 0145072215-PH 2 a 25 014538
• For Phillips-Recess screws PH• Long style• Tough-hard for threaded screws• g 6.3 = 1⁄4”• Hexagon according to DIN 3126-C, ISO 1173-C
1 K 42215 Lg-PH 2 50 014590
• For Pozidriv screws PZ• g 6.3 = 1⁄4”• Hexagon according to DIN 3126-C, ISO 1173-C
1 K 42216-PZ 1 25 0146062216-PZ 2 25 0146132216-PZ 3 25 014620
Screwdriver Bits
• For excessive use• For electric and pneumatic screwdrivers
as well as for manual operation• Special steel
For inside hexagon screwsg 6.3 = 1⁄4”DIN 7426 - C 6.3
1 S K 42204-1,5 1,5 25 0141322204-2 2 25 0141492204-2,5 2,5 25 0141562204-3 3 25 0141632204-4 4 25 0141702204-5 5 25 0141872204-6 6 25 0142002204-8 8 25 014217
• For inside hexagon screws• g 8 = 5⁄16”• DIN 7426-C 8
1 S K 42206- 5 5 30 0142622206- 6 6 30 0142792206- 8 8 30 0142862206-10 10 30 014255
• For slotted screws• g 6.3 = 1⁄4”• DIN 3127-C 6.3
1 G D K 42208- 4 0,5 4,0 25 0143612208- 6 0,6 4,5 25 0143852208- 8 0,8 5,5 25 0144082208- 9 1,0 6,0 25 0144152208-10 1,2 6,5 25 0143232208-11 1,2 8,0 25 0143472208-12 1,6 8,0 25 014354
YC
6
Components and Spare Parts see pages 228 to 236 145
Screwdriver BitsIngenious Tools
22042224
Screwdriver Bits
• For Pozidriv screws PZ• Long style• g 6.3 = 1⁄4”• Hexagon according to DIN 3126-C, ISO 1173-C
1 K 42216 Lg-PZ 2 50 014644
• For Phillips-Recess screws PH• g 8 = 5⁄16”• DIN 3128-C 8
+ = reinforced design
1 K 42217-PH 1 32 0146512217-PH 2 32 0146682217-PH 3 32 0146822217-PH 4 + 38 014699
Y
A• For Pozidriv screws PZ• g 8 = 5⁄16”• Hexagon according to DIN 3126-C, ISO 1173-C
+ = reinforced design
1 K 42218-PZ 1 32 0147052218-PZ 2 32 0147122218-PZ 3 32 0147292218-PZ 4 + 38 014736
Screwdriver Bits
• For TORQ-SET® screws• g 6.3 = 1⁄4”
1 K 42221- 0 25 0788062221- 1 25 0788132221- 2 25 0788202221- 3 25 0788372221- 4 25 0788442221- 5 25 0788512221- 6 25 0788682221- 8 25 0788752221-10 25 078882
• For TORQ-SET® screws• g 8 = 5⁄16”
1 K 42222-1⁄4 32 0788992222-5⁄16 32 0789052222-3⁄8 32 078912
• For inside TORX® screws• g 6.3 = 1⁄4”• Hexagon according to DIN 3126-C, ISO 1173-C
1 r K 42223-T 6 1,67 25 0150232223-T 7 1,99 25 0150302223-T 8 2,31 25 0150472223-T 9 2,50 25 0150542223-T 10 2,74 25 0148662223-T 15 3,27 25 0148802223-T 20 3,86 25 0149032223-T 25 4,43 25 0149342223-T 27 4,99 25 0149582223-T 30 5,52 25 0149722223-T 40 6,65 25 014996
h Screwdriver Bits
AY
• For inside TORX® screws• Long style• g 6.3 = 1⁄4”• For screws at the seat frame cover plate and for
adjusting the steel sliding roof• Hexagon according to DIN 3126-C, ISO 1173-C
1 r K 4BMW 3 and 5-series
2223 Lg-T 25 4,43 65 015061AUDI 80 and 90 since 1988
2223 S Lg-T 25 4,43 110 015108
A
• For inside TORX® screws• Long style• g 6.3 = 1⁄4”• For installing and removing the airbag unit,
e.g. on MERCEDES-BENZ, VW-AUDI, OPEL,PORSCHE
• Hexagon according to DIN 3126-C, ISO 1173-C
1 r K 42223 Lg-T 30 5,52 70 015092
• For tamper resistant TORX® screws(inside TORX® screws with pin)
• With front bore hole• g 6.3 = 1⁄4”• T 30 H for sensor screw (airbag BMW)• Hexagon according to DIN 3126-C, ISO 1173-C
1 r K 42223-T 7 H 1,99 25 0580822223-T 8 H 2,31 25 0580992223-T 9 H 2,50 25 0581052223-T 10 H 2,74 25 0148732223-T 15 H 3,27 25 0148972223-T 20 H 3,86 25 0149102223-T 25 H 4,43 25 0149412223-T 27 H 4,99 25 0149652223-T 30 H 5,52 25 0149892223-T 40 H 6,65 25 015009
• For inside TORX® screws• g 8 = 5⁄16”• Hexagon according to DIN 3126-C, ISO 1173-C
1 r K 42224-T 25 4,43 35 0151152224-T 27 4,99 35 0151222224-T 30 5,52 35 0151392224-T 40 6,65 35 0151602224-T 45 7,82 35 0151772224-T 50 8,83 35 0151842224-T 55 11,22 35 015191
• For tamper resistant TORX® screws(inside TORX® screws with pin)
• With front bore hole• g 8 = 5⁄16”• 6-point according to DIN 3126 C, ISO 1173 C
1 r K 42224-T 25 H 4,43 35 0499362224-T 27 H 4,99 35 0499432224-T 30 H 5,52 35 0499502224-T 40 H 6,65 35 0499672224-T 45 H 7,82 35 0499742224-T 50 H 8,83 35 0499812224-T 55 H 11,22 35 049998
• For inside TORX® screws• Long style• g 8 = 5⁄16”• Hexagon according to DIN 3126-C, ISO 1173-C
1 r K 42224 S Lg-T 25 4,43 100 0152212224 S Lg-T 27 4,99 100 0152382224 S Lg-T 30 5,52 100 0152452224 S Lg-T 40 6,65 100 0152522224 S Lg-T 45 7,82 100 0152692224 S Lg-T 50 8,83 100 0152832224 S Lg-T 55 11,22 100 015306
146 Components and Spare Parts see pages 228 to 236
Screwdriver BitsIngenious Tools
6
h Screwdriver Bits
• For tamper resistant TORX® screws(inside TORX® screws with pin)
• With front bore hole• Long style• g 8 = 5⁄16”• Hexagon according to DIN 3126-C, ISO 1173-C
1 r K 42224 S Lg-T 25 H 4,43 100 0500002224 S Lg-T 27 H 4,99 100 0500172224 S Lg-T 30 H 5,52 100 0500242224 S Lg-T 40 H 6,65 100 0500312224 S Lg-T 45 H 7,82 100 0500482224 S Lg-T 50 H 8,83 100 0500552224 S Lg-T 55 H 11,22 100 050062
5-Star Screwdriver Bits
• For the operation of inside 5-star screws with pin• 20 H: Operation of the screwed connection
of the plug-in pump on MERCEDES-BENZ Ategoand ActrosMAZDA 3 1.4 and 1.6 – screwed connection at the control unitas well as of the air flow sensor on VW
• g 6.3 = 1⁄4”
1 K 4Components2225-10 H 25 0970432225-15 H 25 0970502225-20 H 25 0970672225-25 H 25 0970742225-27 H 25 0970812225-30 H 25 0970982225-40 H 25 097104Assortment with holder• Bit holder with magnetic bit retention• Practical and space-saving
bit storage in the handle• 7 parts
Contents:2225-10 H 15 H 20 H 25 H 27 H 30 H2262
2225/7 H 097333
Adapters
Adapters
1 p j 42230 S-1 6,3 = 1⁄4” 6,3 = 1⁄4” 0153202230 S-2 6,3 = 1⁄4” 10 = 3⁄8” 0153372230 S-3 8 = 5⁄16” 10 = 3⁄8” 0153442230 S-4 6,3 = 1⁄4” 12,5 = 1⁄2” 0153512230 S-5 8 = 5⁄16” 12,5 = 1⁄2” 015368
• For the connection of socketsj 6.3 = 1⁄4” (DIN 3120 - A 6.3) andoperating tools with i drive 6.3 = 1⁄4”,(DIN 3126-E 6.3)
• With ball retention• Chrome-Vanadium• Surface burnished
1 K 42238-1 50 063741
• With permanent magnetensuring a safe grip of bits and screws
• Chrome-Vanadium• Brass socket galvanized• Hexagon drive burnished
1 K 4• For drilling machines and cordless screwdriversi D 6.3 = 1⁄4” g C 6.3 mm
• DIN 7427-Bconnection according to DIN 3126, ISO 1173
2239-1 60 015375
• With permanent magnetensuring a safe grip of bits and screws
• Chrome-Vanadium• Brass socket galvanized• Hexagon drive burnished
1 K 4• For screw driving machinesh D 6,3 = 1⁄4” g A 5.5 mm,e.g. AEG, Bosch, Holz Her, Metabo
• DIN 7427-BConnection according to DIN 3126, ISO 1173
2239-2 72 015382
• With permanent magnetensuring a safe grip of bits and screws
• Chrome-Vanadium• Brass socket galvanized• Hexagon drive burnished
1 K 4• For screw driving machinesh D 6,3 = 1⁄4” g E 6.3 mm,e.g. AEG, Atlas Copco, Black & Decker, Bosch
• DIN 7427-BConnection according to DIN 3126, ISO 1173
2239-3 75 015399
• For screw driving machines• With inside square and inside
hexagon tool insert, with clamp ring• Chrome-Vanadium• Surface burnished• DIN 7427-A
Screwdriver Bits Set
/6 b L M O
Contents:850-5 5,5 6 7 8 9
10 11 12 13 142204-2 2,5 3 4 5 6 82208-4 6 8 102215-PH 1 PH 2 2216-PZ 1 PZ 22223-T 10 H T 15 H T 20 H T 25 H T 30 H T 40 H2238-1 2239-3 2264 2304
1 42200/36 063734
Screwdriver Bits Set
/
• Assortmentfor slotted screws, Phillips-Recess and Pozidriv screws
• In plastic box• With PUR foam insert
103 parts:2208-6 8 10 10 pcs. each2215-PH 1 PH 2 PH 3 PH 4 10 pcs. each2216-PZ 1 PZ 2 PZ 3 10 pcs. each2239-1 3 pcs. each
1 42240/103 015412
Adapters
• For manual operation• With inside square and inside hexagon insert• With clamping ball for bits• Chrome-Vanadium• Surface chrome-plated
1 b j K 42250-1 6,3 = 1⁄4” 6,3 = 1⁄4” 23,5 0154432250-2 6,3 = 1⁄4” 10 = 3⁄8” 30 0154502250-3 8 = 5⁄16” 10 = 3⁄8” 31 0154742250-4 6,3 = 1⁄4” 12,5 = 1⁄2” 35 0155042250-5 8 = 5⁄16” 12,5 = 1⁄2” 36 015511
B
C
6
Components and Spare Parts see pages 228 to 236 147
Screwdriver BitsIngenious Tools
22242262
Holder for Screwdriver Bits
A
• i drive 8 = 5⁄16”
1 K 42251-1 310 015535
• i drive 6.3 = 1⁄4”• T-handle• Magnetic bit retention• Aluminium
1 b K 42253 6,3 = 1⁄4” 135 015559
• i drive 6.3 = 1⁄4”• Magnetic bit retention
1 b K 42255 6,3 = 1⁄4” 190 015566
• drive i 6.3 = 1⁄4”• Flexible shaft
1 K 42255-1 312 050079
Bit Holders for Screwdriver Bits
1 K 410 parts
Contents:2223-T 9 T 10 T 15 T 20
T 25 T 27 T 30 T 402239-1
2260/10 T 147,5 015702
• i drive 6.3 = 1⁄4”• Magazine handle
with bits 6.3 = 1⁄4” gand adapter for drills and cordless screwdrivers,may be fixed also in the plastic magazine(screwdriver handle)
1 K 46 parts
Contents:2208-6 8 2215-PH 1 PH 22239-1
2260/6 147,5 01574010 parts
Contents:2208-4 6 8 102215-PH 1 PH 22216-PZ 1 PZ 22239-1
2260/10 147,5 015573B
• i drive 6.3 = 1⁄4”• Magazine handle empty• Magnetic bit retention• Short style
1 K 42261 90 015795
• i drive 6.3 = 1⁄4”• Magazine handle, empty• Magnetic bit retention
1 K 4long style
2262 200 015825
C
• i drive 6.3 = 1⁄4”• Magazine handle• Magnetic bit retention• Short style• Bit set, 7 parts, in magazine handle
Contents:2208-6 8 9 112215-PH 1 PH 22261
1 K 42261/7 90 015801
• i drive 6.3 = 1⁄4”• Magazine handle• Magnetic bit retention• Long style• Bit set, 7 parts, in handle
Contents:2208-6 8 9 112215-PH 1 PH 22262
1 K 42262/7 200 015832
HIGHLIGHTSHIGHLIGHTS
Bit Holders with Screwdriver Bits
148 Components and Spare Parts see pages 228 to 236
Screwdriver BitsIngenious Tools
6Repair Sets
1 4Repair Set for shift leverconsisting of: shift lever, screws, ball, compression spring for 863, 863 G, 863 P, 863 PC, 863 Q,863 S, 863 ST, 2264
863 P/5 038589Repair Set for shift lever,consisting of: shift lever, screws, ball, compression springfor 8816 G, 8816 GK, 8816 P,8816 S, 8816 ST2264-1,6110 CT, 6110-1 CT, 6111-1 CT,6114-1 CT, 6115-1 CT6402-1, 6402-1 S, 6408-1
8816 P/5 042227Repair Set for ratchet wheel 6.3 = 1⁄4” iconsisting of: ratchet wheel, pawl, shift lever, screws, ball, compression springfor 2264, 6408
2264/7 015917Repair Set for ratchet wheel 8 = 5⁄16” iconsisting of:ratchet wheel, pawl, shift lever, screws, ball, compression springfor 2264-1, 6408-1
2264-1/7 015900
Reversible Ratchets for Bits
• For screwdriver bitsi drive 6.3 = 1⁄4”and i 8 = 5⁄16”
• With magnetic bit retention• With ratchet function, reversible• Special steel• Surface bright chrome-plated
1 K 4flat style
2265-1 140 079636offset style
2265-2 137 076253
Bit Screwdriver
K L M
• i drive 6.3 = 1⁄4”,• Free-running trinamic handle• Right-hand and left-hand rotation• Operation is possible in fixed position• Magazine with bits• Blade with permanent magnet• Knurled shank ensures a good grip
allows easy and non-skidding turning• Blade with hex bolster• 7 parts
Contents:2208-4 82215-PH 1 PH 22216-PZ 1 PZ 22266
1 K 42266/7 236 015931Bit Screwdriver, empty
2266 236 015924
Impact Screwdriver
Impact Screwdriver
1 K 42272 165 015979
Impact Screwdriver Set (Bits)
b /G
• i drive 8 = 5⁄16”• In sheet metal box• With plastic insert• 17 parts
Contents:2206-5 6 8 102210-8 9 10 12 142217-PH 2 PH 3 PH 42224-T 30 T 40 T 45 T 502272
1 42272/17 015986
Adapters
• For the connection of sockets with square drive according to DIN 3120 and operating tools with hexagon drive
• Chrome-Vanadium• Surface burnished
1 i g 42304 6,3 = 1⁄4” 6,3 = 1⁄4” 0160202311 12,5 = 1⁄2” 10 = 3⁄8” 016068
• For impact loosening and tightening of screws
• i drive 8 = 5⁄16”
Reversible Ratchets for Bits
• For screwdriver bits• Chrome-Vanadium• Surface chrome-plated, polished
1 K 4i drive 6.3 = 1⁄4”,20 teeth
2264 115 015887i drive 8 = 5⁄16”,30 teeth
2264-1 200 015894
B
C
