Upload
others
View
25
Download
0
Embed Size (px)
Citation preview
Round Automet cleaning system is specially designedto meet the requirement of cell production system of small components and child parts. With the loading andunloading at the same end the operator has enough timeto manage other machines as well in the cell. This compactmachine is capable of achieving very good level of cleaning, and can give a totally dry component.
The system mainly consists of cleaning rinsing and drying.
Good and continuous filtration system ensures the constantremoval of dirt from the cleaning solution and an effective oil skimmer increases the life of the cleaning solution.
The system is designed to clean onestandard basket and the productionrates upto 20 baskets per hourdepending on the required cycletimes.
Injection flood wash. Introductionof high pressure liquid in the processliquid to create strong turbulence.
Ultrasonic cleaning. By use of ultrasonic cavitational power the solvency of the cleaners are greatlyenhanced for oil and emulsion andalso very effectively dislodge the dirt particle which are loose and onthe component .
This turbulence makes liquid reachall parts of the component and
Large (250 litre) wash and rinsetanks extend solution life andreduce the likelihood of foamingf r o m a g i t a t i o n c a u s e d b y pumping action.
To reduce the risk of injury, a pump safetyinterlock on the process chamber closeand other safety guarding are standard features.
causes effective cleaning.
Standard Features
System specifications are subject to change without notice.
Model Name
Power required
Heating capacity
Footprint W x L
Machine height
Loading height
Basket size
Operating pressure
Operating temperature
Tank capacity
Round Automet
40A , 415 V, 3 ph, 50 Hz. +N+E
18 kw
1600 x 2800 mm
Its depends on parts
35 psi
Up to 140°F
250 litres
2000mm
1041mm
2, 4 bar
Up to 60°C
SystemSpecifications
Standard Multi-StageWash / Rinse / Blow-Off
2. Loading & unloading at same side
Highlights
3. Occupies very little area
4. Easy to locate & Start
5. PLC based system
INSIGHT ENGINEERING SYSTEMS PVT. LTD.
No.3, Bhavsar Compound, Shree Nagar, Opp. Shetty Chemicals, Off Saki Vihar Road, Saki Naka, Mumbai - 400072.
MMI interface process parametersettings and fault alarms
Cleans OneBasket at a time.
Pressure gaugesfor Detergent and Rinse water.
Large detergent and rinse tanksFor a robust process and longer solution life.
Easy to Load Basketdesign.
Powder Coated enclosureof mechanical componentsfor operator safety.
Easy access tomechanicalcomponents bypanel lock doors.
Control Panelequipped withlarge window.
Tel : +91-22-28478295 / +91-22-28470053.
E-mail : [email protected] : www.insightengg.com
Wash, rinse and Drying.Stainless-steel 304 bag filtrationwith pressure switch.3 mm thick stainless-steel304 Tanks 250 liters.Process tanks 60 liters capacity.Patented Rod type Powerful ultrasonic transducers.Up/down and indexing byPneumatic cylinders.Two vertical SS pumps.Baskets on request.Automatic top up for storage tank.Low liquid level heating systemprotection.Pump safety interlock for theprocess chamber operationLow energy consumption designresulting in lower heatingrequirements.Fully insulated solution tanks.Hot air drying.Optional vacuum drying.MMI display of machine status,fault alarms and diagnostics.Powder coated cabinet. See through control Panel
1. Best suited for Lean production
No.8, P.P. Amman Koil Street, Kalyani Puram,Nagelkeni, Chrompet, Chennai - 600 044.
Tel : +044-22380124.
Head Office :
Branch Office :