Inner Ring Adjusts 1/2" to 1-1/2" in Depth —Before or After Drywall Installation!

Adjustable Ring

Typical Applications:• Outside firewalls in hotel, casino and residential high-rise structures• Hospital construction, where drywall depth often varies• Ceramic-tile walls• Any other application in which a stud-mounted box and ring mayrequire depth adjustment prior to final trim work

Now there’s a quick, easy and economical way toensure that stud-mounted outlet boxes fit flush withfinished drywall, plaster or ceramic tile. The Steel City®

Adjustable Ring features an inner ring that adjusts from1/2" to 1-1/2" in depth to accommodate various drywallthicknesses. Marked with a measured rule and equippedwith two adjustment screws, the inner ring can be set to theanticipated depth prior to installation and then easily adjustedafter drywall installation to accommodate any variation in depth(1/2 to 1-1/2). Rely on the Steel City® Adjustable Ring for acode-compliant finish in many applications.

Steel City ® Adjustable Ring

Finally a Quick, Easy Solution fora Common Rough-In Problem!

2 adjustment screwsin opposing corners

Flush is 1/2"

Measuredrule

1

2

3

Adjustable Ring Installation/Adjustment Steps:

Loosen…The 2 adjustment screws located in opposing cornersof the ring.

Re-tighten…Adjustment screws.

Adjust…Inner ring to be flush with wall surface.

Rough-In Phases:Install Ring to box with the inner ring in the extended position

Set the depth of the inner ring to the anticipated drywall/tile thickness and lock intoplace by tightening adjustment screws

NOTE: Ring is shipped assembled with the inner ring not preset

Problem: Ring is set too far back/forward

1

2

Solution:

Steel City ® Adjustable Ring

Adjustability Enables Flush Fitwith Drywall Every Time!

• Patent-pending design, rugged steel construction similarto standard ring but with greater flexibility

• Quick-release locking mechanism enables fast and easyadjustment of inner ring

• Locking mechanism located behind outer ring remains safefrom router damage or excess mudding

• Adjustment screws located outside inner ring leave maximumcapacity for devices — won’t take up crucial box area

• Measured rule on inner ring for simple pre-fab settingin pre-drywall installs

• Mounts to any standard 4" square 2-1/8" deep outlet boxsuch as the Iberville® BC52171-K

• Accepts industry standard devices, including GFCIs• CSA Certified• Not intended for 1-1/2" deep boxes

Steel City® Adjustable Mud RingCat. Std. Pkg. UPCNumber Description Qty. Number

52-C-ADJ Single-Gang Adjustable Ring, 1/2" to 1-1/2" 25 78599104454

2 adjustment screwsin opposing corners

Flush is 1/2"

Measuredrule

Atlantic Region Quebec Region Ontario Region Western Region

Thomas & Betts Limited106 Chain Lake Drive, Unit 2CHalifax, Nova Scotia B3S 1A8Tel.: (902) 450-1307Toll Free: 1-877-862-4357Fax: (902) 450-1309

Thomas & Betts Limited7900 Taschereau BoulevardBuilding D, Suite 108Brossard, Quebec J4X 1C2Tel.: (450) 466-1102Toll Free: 1-800-465-1399Fax: (450) 466-1163

Thomas & Betts Limited2000 Argentia RoadPlaza 5, Suite 500Mississauga, Ontario L5N 2R7Tel.: (905) 858-1010Toll Free: 1-877-291-7771Fax: (905) 858-1080

Thomas & Betts Limited6531-148th Street, #1Surrey, British ColumbiaV3S 3C5Tel.: (604) 598-9811Toll Free: 1-866-540-8220Fax: (604) 598-9840

Thomas & Betts Limited4836 Eleniak RoadEdmonton, Alberta T6B 2S1Tel.: (780) 424-7092Toll Free: 1-888-664-5666Fax: (780) 424-7093Toll Free: 1-866-424-4082

©2008 Thomas & Betts Limited. All rights reserved. Printed in Canada. 08/08/4000 Order No. SCMUDRING-E