Upload
kirkan
View
45
Download
1
Embed Size (px)
DESCRIPTION
Inserting a Component. Inserting one 3” Long Pipe Component before another Piping Component (Flg pair) Using the Bottom Bar or the Dialog Bar of TRIFLEX: Insert Ahead Arrow. Light Green Arrow Facing down on dialog bar. Insert component ahead of current component. Existing Pipe Components. - PowerPoint PPT Presentation
Citation preview
1
Inserting one 3” Long Inserting one 3” Long Pipe Component before Pipe Component before
another Piping another Piping Component (Flg Pair).Component (Flg Pair).
Inserting one 3” Long Inserting one 3” Long Pipe Component before Pipe Component before
another Piping another Piping Component (Flg Pair).Component (Flg Pair).
www.pipingsolutions.com
TRIFLEX® Windows
2
Inserting a ComponentInserting a Component
Inserting a ComponentInserting a ComponentInserting a ComponentInserting a Component
•Inserting one 3” Long Pipe Component before another Piping Component (Flg pair)
•Using the Bottom Bar or the Dialog Bar of TRIFLEX: •Insert Ahead Arrow.
•Light Green Arrow Facing down on dialog bar.
•Insert component ahead of current component.
www.pipingsolutions.com
TRIFLEX® Windows
Inserting a ComponentInserting a Component3
Anchor
Pipe
Flange Pair
Objective is to insert a 3” segment of pipe prior to the flange pair after data point 10 and before data point
15. The new component is to be labeled 12.
Existing Pipe ComponentsExisting Pipe Components
www.pipingsolutions.com
TRIFLEX® Windows
Inserting a ComponentInserting a Component4Existing Pipe ComponentsExisting Pipe Components
Click on the Component immediately following the location at which you wish to insert the 3” segment of Pipe. This will make the Flange Pair the Current
Component.
www.pipingsolutions.com
TRIFLEX® Windows
Inserting a ComponentInserting a Component5
Click on the “Insert Ahead” of mode of input found in
the lower left corner of the dialog.
Insert Ahead
Using Insert AheadUsing Insert Ahead
www.pipingsolutions.com
TRIFLEX® Windows
Inserting a ComponentInserting a Component6
Enter the desired Delta Dimensions.
Dimensions in this case we entered 3” along the X
axis.
Click on the Pipe Icon and this
dialog will appear.
Change the To Node to 12.
Using Insert AheadUsing Insert Ahead
www.pipingsolutions.com
TRIFLEX® Windows
Inserting a ComponentInserting a Component7
When OK is clicked, the 3” section of Pipe is inserted in the model prior to the flange pair. The new component is numbered from 10 to 12 and TRIFLEX automatically renumbers the starting number of the Flange Component
to 12.
New Component
Editing Pipe ComponentsEditing Pipe Components
www.pipingsolutions.com
TRIFLEX® Windows
Inserting a ComponentInserting a Component8
For more details please contact:
6219 Brittmoore Road
Houston, Texas 77041-5114 U.S.A.
Voice: 713 849 3366
Fax: 713 849 3654