Upload
vuliem
View
220
Download
1
Embed Size (px)
Citation preview
U.S. Patent No. 8,856,780
20171101
REVISION DATE
FT-RSA-MA3-[FT-DC2-S]FIRMWARE
FT-DC2-SHARDWARE
ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)
ACCESSORIES
DOCUMENT NUMBER
2014-2018 MAZDA 3 HATCHBACK PTS AT
www.idatalink.comAutomotive Data Solutions Inc. © 2017
INSTALL GUIDE
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
T001_H
T-HARNESS / COMPONENT LOCATOR - 1 OF 1
AB
C
PAGE 2 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
1
1
2
MS1
VS2
VS1
VS4
VS3
T001_H
1
8
2
9
3
10
4
11
5
12
6
13
7
14
2 31 4 65
MS2
2
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
T-HARNESS / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
OPTIONAL
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
START STOP UNIT, UNDER STEERING COLUMN (A)
1
1
2
CLOCK SPRING (B)
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
2020
010102020303
1212
0303
04040505060607070808090910101111
12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT
01010202
040405050606070708080909
1111
131314141515161617171818
010102020303040405050606
1919
GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT
GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT
09091010
(SWITCH SIDE)
(CONNECTOR SIDE)
01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT0808
RELAY
1: WHITE
1: WHITE
2: WHITE
2: VEHICLE HARNESS
1: VEHICLE HARNESS
HORN (-) BLUE - 01
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
HOOD SWITCH
!
M3
M2M5M4
PAGE 3 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
T001_W
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
A
C
B
PAGE 4 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
8 77 6 5 4 3 2 110 9
20212223 14 131819
12 11
17 16 1524
2
18
3
19
1
17
9
25
10
26
4
20
11
27
8
24
6
22
7
23
5
21
12
28
13
29
14
30
15
31
16
32
T001_W
1
8
2
9
3
10
4
11
5
12
6
13
7
14
2 31 4 65
1
1
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
HARDWIRE / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT
01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)
01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)
04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT06 WHITE•BLUE DOT
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
GROUND (-) BLACK - 13
ACCESSORY (+) BROWN - 14
KEYLESS (DATA) LTBLUE - 09
IGNITION (+) PURPLE - 17
CANH (DATA) WHITE - 07
CANL (DATA) RED - 08
IGNITION (+) LTGREEN - 10
12 (+) YELLOW - 12
PTS (-) LTBLUE - 17
STARTER (+) GREEN - 23
START STOP UNIT, UNDER STEERING COLUMN (A)
1: WHITE
2: WHITE
1 2
03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE
CLOCK SPRING (B)
HORN (-) BLUE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
1
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
1: WHITE
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
HOOD SWITCH
!
M3
M2M5M4
PAGE 5 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
ENGINE
START
STOP
STOP ACC ON STARTON
02
03
04
ENGINE
START
STOP
STOP ACC ON STARTSTOP
05
06
07
08
ENGINE
START
STOP
STOP ACC ON STARTON
09
10
11
ENGINE
START
STOP
STOP ACC ON STARTSTOP
>>
12
ENGINE
START
STOP
STOP ACC ON STARTSTART
13
14
15
16
MODULE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: All vehicle doors must be closed
and locked prior to remote start sequence.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait 10 seconds, LED 1 will flash GREEN
rapidly.
Set ignition to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
Connect power first. Connect module to
vehicle.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait, LED 1 will turn solid GREEN for 2
seconds.
Set ignition to OFF position.
If vehicle is equipped with power liftgate: open
and close the power liftgate with OEM keyfob.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN. Module
Programming Procedure completed.
PAGE 6 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
02
03
04
05
06
>>
TAKEOVER PROCEDURE - 1 OF 1
All vehicle doors must be closed and locked
prior to remote start sequence.
Time restriction. Complete steps 2 to 5 within
45 seconds.
Press unlock on OEM or aftermarket remote
or request switch.
Open driver door and enter vehicle.
Close driver door.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in
vehicle engine shutdown.
PAGE 7 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
Question 1: Do the doors lock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
Question 2: Do the doors unlock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 6: Does the vehicle remote start?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
Question 7: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
17 Wait for the vehicle to start.
18 Press brake pedal.
Question 10: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once
[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHECKLIST - WITH AFTERMARKET KEYFOB
PAGE 8 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 2 OF 2
CHECKLIST - WITH OEM KEYFOB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
YES: Go to next step.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
PAGE 9 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
U.S. Patent No. 8,856,780
20171101
REVISION DATE
FT-RSA-MA3-[FT-DC2-S]FIRMWARE
FT-DC2-SHARDWARE
ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)
ACCESSORIES
DOCUMENT NUMBER
2014-2018 MAZDA 3 SEDAN PTS AT
www.idatalink.comAutomotive Data Solutions Inc. © 2017
INSTALL GUIDE
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
T001_H
T-HARNESS / COMPONENT LOCATOR - 1 OF 1
AB
C
PAGE 2 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
1
1
2
MS1
VS2
VS1
VS4
VS3
T001_H
1
8
2
9
3
10
4
11
5
12
6
13
7
14
2 31 4 65
MS2
2
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
T-HARNESS / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
OPTIONAL
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
START STOP UNIT, UNDER STEERING COLUMN (A)
1
1
2
CLOCK SPRING (B)
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
2020
010102020303
1212
0303
04040505060607070808090910101111
12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT
01010202
040405050606070708080909
1111
131314141515161617171818
010102020303040405050606
1919
GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT
GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT
09091010
(SWITCH SIDE)
(CONNECTOR SIDE)
01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT0808
RELAY
1: WHITE
1: WHITE
2: WHITE
2: VEHICLE HARNESS
1: VEHICLE HARNESS
HORN (-) BLUE - 01
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
HOOD SWITCH
!
M3
M2M5M4
PAGE 3 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
T001_W
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
A
C
B
PAGE 4 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
8 77 6 5 4 3 2 110 9
20212223 14 131819
12 11
17 16 1524
2
18
3
19
1
17
9
25
10
26
4
20
11
27
8
24
6
22
7
23
5
21
12
28
13
29
14
30
15
31
16
32
T001_W
1
8
2
9
3
10
4
11
5
12
6
13
7
14
2 31 4 65
1
1
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
HARDWIRE / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT
01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)
01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)
04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT06 WHITE•BLUE DOT
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
GROUND (-) BLACK - 13
ACCESSORY (+) BROWN - 14
KEYLESS (DATA) LTBLUE - 09
IGNITION (+) PURPLE - 17
CANH (DATA) WHITE - 07
CANL (DATA) RED - 08
IGNITION (+) LTGREEN - 10
12 (+) YELLOW - 12
PTS (-) LTBLUE - 17
STARTER (+) GREEN - 23
START STOP UNIT, UNDER STEERING COLUMN (A)
1: WHITE
2: WHITE
1 2
03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE
CLOCK SPRING (B)
HORN (-) BLUE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
1
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
1: WHITE
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
HOOD SWITCH
!
M3
M2M5M4
PAGE 5 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
ENGINE
START
STOP
STOP ACC ON STARTON
02
03
04
ENGINE
START
STOP
STOP ACC ON STARTSTOP
05
06
07
08
ENGINE
START
STOP
STOP ACC ON STARTON
09
10
11
ENGINE
START
STOP
STOP ACC ON STARTSTOP
>>
12
ENGINE
START
STOP
STOP ACC ON STARTSTART
13
14
15
16
MODULE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: All vehicle doors must be closed
and locked prior to remote start sequence.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait 10 seconds, LED 1 will flash GREEN
rapidly.
Set ignition to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
Connect power first. Connect module to
vehicle.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait, LED 1 will turn solid GREEN for 2
seconds.
Set ignition to OFF position.
If vehicle is equipped with power liftgate: open
and close the power liftgate with OEM keyfob.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN. Module
Programming Procedure completed.
PAGE 6 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
02
03
04
05
06
>>
TAKEOVER PROCEDURE - 1 OF 1
All vehicle doors must be closed and locked
prior to remote start sequence.
Time restriction. Complete steps 2 to 5 within
45 seconds.
Press unlock on OEM or aftermarket remote
or request switch.
Open driver door and enter vehicle.
Close driver door.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in
vehicle engine shutdown.
PAGE 7 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
Question 1: Do the doors lock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
Question 2: Do the doors unlock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 6: Does the vehicle remote start?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
Question 7: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
17 Wait for the vehicle to start.
18 Press brake pedal.
Question 10: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once
[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHECKLIST - WITH AFTERMARKET KEYFOB
PAGE 8 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 2 OF 2
CHECKLIST - WITH OEM KEYFOB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
YES: Go to next step.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
PAGE 9 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
U.S. Patent No. 8,856,780
20171101
REVISION DATE
FT-RSA-MA3-[FT-DC2-S]FIRMWARE
FT-DC2-SHARDWARE
ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)
ACCESSORIES
DOCUMENT NUMBER
2014-2018 MAZDA 6 PTS AT
www.idatalink.comAutomotive Data Solutions Inc. © 2017
INSTALL GUIDE
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
T002_H
T-HARNESS / COMPONENT LOCATOR - 1 OF 1
A
C
B
PAGE 2 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
MS1
VS2
VS1
VS4
VS3
T002_H
1
8
2
9
3
10
4
11
5
12
6
13
7
14
2
2 31 4 65
2
1
1
MS2
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
T-HARNESS / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
START STOP UNIT, UNDER STEERING COLUMN (B)
1 2
2020
010102020303
1212
0303
04040505060607070808090910101111
01010202
040405050606070708080909
1111
1313141415151616171718181919
010102020303040405050606
01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT080809091010
12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT
RELAY
1: WHITE
2: WHITE
2: VEHICLE HARNESS
1: VEHICLE HARNESS
CLOCK SPRING (D)
HORN (-) BLUE - 01
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT
GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
1
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
(SWITCH SIDE)
(CONNECTOR SIDE)
1: WHITE
HOOD SWITCH
OPTIONAL
!
M3
M2M5M4
PAGE 3 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
T002_W
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
A
C
B
PAGE 4 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
8 77 6 5 4 3 2 110 9
20212223 14 131819
12 11
17 16 1524
2
18
3
19
1
17
9
25
10
26
4
20
11
27
8
24
6
22
7
23
5
21
12
28
13
29
14
30
15
31
16
32
T002_W
1
8
2
9
3
10
4
11
5
12
6
13
7
14
1
1
2 31 4 65
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
HARDWIRE / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT
01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT
20 BLACK - GROUND (-)20 BLACK - GROUND (-)
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
GROUND (-) BLACK - 13
ACCESSORY (+) BROWN/RED - 14
KEYLESS (DATA) GREEN/ORANGE - 09
CANH (DATA) WHITE OR WHITE/BLACK - 07
CANL (DATA) RED OR RED/YELLOW - 08
IGNITION (+) LTGREEN/RED - 10
12 (+) YELLOW - 12
PTS (-) RED/BLACK - 17
STARTER (+) BROWN/BLACK - 23
START STOP UNIT, UNDER STEERING COLUMN (A)
1: WHITE
2: WHITE
1 2
19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT
12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT
10 WHITE/BLACK•BLACK10 WHITE/BLACK•BLACK
01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)
04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT06 WHITE•BLUE DOT
03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE
CLOCK SPRING (B)
HORN (-) BLUE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
IGNITION (+) PURPLE - 17
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
HOOD SWITCH
1
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
1: WHITE
!
M3
M2M5M4
PAGE 5 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
ENGINE
START
STOP
STOP ACC ON STARTON
02
03
04
ENGINE
START
STOP
STOP ACC ON STARTSTOP
05
06
07
08
ENGINE
START
STOP
STOP ACC ON STARTON
09
10
11
ENGINE
START
STOP
STOP ACC ON STARTSTOP
>>
12
ENGINE
START
STOP
STOP ACC ON STARTSTART
13
14
15
16
MODULE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: All vehicle doors must be closed
and locked prior to remote start sequence.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait 10 seconds, LED 1 will flash GREEN
rapidly.
Set ignition to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
Connect power first. Connect module to
vehicle.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait, LED 1 will turn solid GREEN for 2
seconds.
Set ignition to OFF position.
If vehicle is equipped with power liftgate: open
and close the power liftgate with OEM keyfob.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN. Module
Programming Procedure completed.
PAGE 6 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
02
03
04
05
06
>>
TAKEOVER PROCEDURE - 1 OF 1
All vehicle doors must be closed and locked
prior to remote start sequence.
Time restriction. Complete steps 2 to 5 within
45 seconds.
Press unlock on OEM or aftermarket remote
or request switch.
Open driver door and enter vehicle.
Close driver door.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in
vehicle engine shutdown.
PAGE 7 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
Question 1: Do the doors lock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
Question 2: Do the doors unlock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 6: Does the vehicle remote start?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
Question 7: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
17 Wait for the vehicle to start.
18 Press brake pedal.
Question 10: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once
[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHECKLIST - WITH AFTERMARKET KEYFOB
PAGE 8 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 2 OF 2
CHECKLIST - WITH OEM KEYFOB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
YES: Go to next step.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
PAGE 9 OF 9
U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
U.S. Patent No. 8,856,780
20171101
REVISION DATE
FT-RSA-MA3-[FT-DC2-S]FIRMWARE
FT-DC2-SHARDWARE
ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)
ACCESSORIES
DOCUMENT NUMBER
2016-2018 MAZDA CX-3 PTS AT
www.idatalink.comAutomotive Data Solutions Inc. © 2017
INSTALL GUIDE
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
T005_H
T-HARNESS / COMPONENT LOCATOR - 1 OF 1
A
B
C
PAGE 2 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
MS1
VS2
VS1
VS4
VS3
T005_H
1
8
2
9
3
10
4
11
5
12
6
13
7
14
MS2
1
1
87654321
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
T-HARNESS / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
START STOP UNIT, UNDER STEERING COLUMN (A)
2020
010102020303
1212
04040505060607070808090910101111
010102020303040405050606070708080909
1111
1313141415 BROWN15 BROWN161617171818
010102020303040405050606
0101020203030404050506060707080809091010
RELAY
1: WHITE
2: WHITE
1 22: VEHICLE HARNESS
1: VEHICLE HARNESS
(SWITCH SIDE)
1212
1919
CLOCK SPRING (B)
HORN (-) PINK - 01
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT
GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOT
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) BLACK - 02
PARKING LIGHT 1 (-) BLUE - 01
11: WHITE
HOOD SWITCH
(CONNECTOR SIDE)
22017 CX-3 w/AWD : CUT AND INSULATE BOTHENDS OF THE BROWN WIRE LOCATED IN PIN 15
2
!
M3
M2M5M4
PAGE 3 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
T005_W
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
A
B
C
PAGE 4 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
8 77 6 5 4 3 2 110 9
20212223 14 131819
12 11
17 16 1524
2
18
3
19
1
17
9
25
10
26
4
20
11
27
8
24
6
22
7
23
5
21
12
28
13
29
14
30
15
31
16
32
T005_W
1
8
2
9
3
10
4
11
5
12
6
13
7
14
1
1
87654321
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
HARDWIRE / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT
01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT
20 BLACK - GROUND (-)20 BLACK - GROUND (-)
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
GROUND (-) BLACK - 13
CANH (DATA) GREEN - 07
CANL (DATA) RED - 08
IGNITION (+) YELLOW - 10
12 (+) PINK - 12
PTS 2 (-) RED - 17
STARTER 1 (+) GRAY - 23
START STOP UNIT, UNDER STEERING COLUMN (A)
1: WHITE
2: WHITE
1 2
19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT
12 WHITE•BLACK DOT12 WHITE•BLACK DOT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT
06 WHITE•BLUE06 WHITE•BLUE
CLOCK SPRING (B)
HORN (-) PINK - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
KEYLESS (DATA) PINK - 09
01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) BLACK - 02
PARKING LIGHT 1 (-) BLUE - 01
11: WHITE
HOOD SWITCH02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)
04 WHITE/RED•BLUE - IGNITION (+)04 WHITE/RED•BLUE - IGNITION (+)05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT
03 GRAY/RED•BLUE DOTDOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOTDOT - PARKING LIGHT 2 (-) CONNECTOR SIDE
IGNITION (+) BROWN - 17
!
M3
M2M5M4
PAGE 5 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
ENGINE
START
STOP
STOP ACC ON STARTON
02
03
04
ENGINE
START
STOP
STOP ACC ON STARTSTOP
05
06
07
08
ENGINE
START
STOP
STOP ACC ON STARTON
09
10
11
ENGINE
START
STOP
STOP ACC ON STARTSTOP
>>
12
ENGINE
START
STOP
STOP ACC ON STARTSTART
13
14
15
16
MODULE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: All vehicle doors must be closed
and locked prior to remote start sequence.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait 10 seconds, LED 1 will flash GREEN
rapidly.
Set ignition to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
Connect power first. Connect module to
vehicle.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait, LED 1 will turn solid GREEN for 2
seconds.
Set ignition to OFF position.
If vehicle is equipped with power liftgate: open
and close the power liftgate with OEM keyfob.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN. Module
Programming Procedure completed.
PAGE 6 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
02
03
04
05
06
>>
TAKEOVER PROCEDURE - 1 OF 1
All vehicle doors must be closed and locked
prior to remote start sequence.
Time restriction. Complete steps 2 to 5 within
45 seconds.
Press unlock on OEM or aftermarket remote
or request switch.
Open driver door and enter vehicle.
Close driver door.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in
vehicle engine shutdown.
PAGE 7 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
Question 1: Do the doors lock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
Question 2: Do the doors unlock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 6: Does the vehicle remote start?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
Question 7: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
17 Wait for the vehicle to start.
18 Press brake pedal.
Question 10: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once
[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHECKLIST - WITH AFTERMARKET KEYFOB
PAGE 8 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 2 OF 2
CHECKLIST - WITH OEM KEYFOB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
YES: Go to next step.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
PAGE 9 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
U.S. Patent No. 8,856,780
20171101
REVISION DATE
FT-RSA-MA3-[FT-DC2-S]FIRMWARE
FT-DC2-SHARDWARE
ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)
ACCESSORIES
DOCUMENT NUMBER
2013-2016 MAZDA CX-5 PTS AT
www.idatalink.comAutomotive Data Solutions Inc. © 2017
INSTALL GUIDE
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
T004_H
T-HARNESS / COMPONENT LOCATOR - 1 OF 1
C
AB
PAGE 2 OF 9
U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
MS1
VS2
VS1
VS4
VS3
T004_H
1
8
2
9
3
10
4
11
5
12
6
13
7
14
MS2
2
2 31 4 65
2
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
T-HARNESS / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
START STOP UNIT, UNDER STEERING COLUMN (A)
1 2
2020
010102020303
1212
04040505060607070808090910101111
01010202030304040505060607070808090910101111
131314141515161617171818
010102020303040405050606
01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT080809091010
12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT
1919
RELAY
1: WHITE
2: WHITE
2: VEHICLE HARNESS
1: VEHICLE HARNESS
CLOCK SPRING (B)
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
HORN (-) PURPLE - 01
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT
GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
1
(SWITCH SIDE)
(CONNECTOR SIDE)
1: WHITE
HOOD SWITCH
!
M3
M2M5M4
PAGE 3 OF 9
U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
T004_W
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
C
AB
PAGE 4 OF 9
U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
8 77 6 5 4 3 2 110 9
20212223 14 131819
12 11
17 16 1524
2
18
3
19
1
17
9
25
10
26
4
20
11
27
8
24
6
22
7
23
5
21
12
28
13
29
14
30
15
31
16
32
T004_W
1
8
2
9
3
10
4
11
5
12
6
13
7
14
1
1
2 31 4 65
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
HARDWIRE / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT
01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT
20 BLACK - GROUND (-)20 BLACK - GROUND (-)
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
GROUND (-) BLACK - 13
ACCESSORY (+) BROWN/RED - 14
KEYLESS (DATA) GREEN/ORANGE - 09
CANH (DATA) WHITE/BLACK - 07
CANL (DATA) RED/YELLOW - 08
IGNITION (+) LTGREEN/RED - 10
12 (+) YELLOW - 12
PTS (-) RED/BLACK - 17
STARTER (+) BROWN/BLACK - 23
START STOP UNIT, UNDER STEERING COLUMN (A)
1: WHITE
2: WHITE
1 2
19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT
12 WHITE•BLACK DOT12 WHITE•BLACK DOT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT
01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE
06 WHITE•BLUE DOT06 WHITE•BLUE DOT
CLOCK SPRING (B)
HORN (-) PURPLE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
02 WHITE/BLACK•BLU DOTE - IGNITION (+)02 WHITE/BLACK•BLU DOTE - IGNITION (+)
04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT
03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE
IGNITION (+) PURPLE - 17
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
HOOD SWITCH
1
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
1: WHITE
!
M3
M2M5M4
PAGE 5 OF 9
U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
ENGINE
START
STOP
STOP ACC ON STARTON
02
03
04
ENGINE
START
STOP
STOP ACC ON STARTSTOP
05
06
07
08
ENGINE
START
STOP
STOP ACC ON STARTON
09
10
11
ENGINE
START
STOP
STOP ACC ON STARTSTOP
>>
12
ENGINE
START
STOP
STOP ACC ON STARTSTART
13
14
15
16
MODULE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: All vehicle doors must be closed
and locked prior to remote start sequence.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait 10 seconds, LED 1 will flash GREEN
rapidly.
Set ignition to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
Connect power first. Connect module to
vehicle.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait, LED 1 will turn solid GREEN for 2
seconds.
Set ignition to OFF position.
If vehicle is equipped with power liftgate: open
and close the power liftgate with OEM keyfob.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN. Module
Programming Procedure completed.
PAGE 6 OF 9
U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
02
03
04
05
06
>>
TAKEOVER PROCEDURE - 1 OF 1
All vehicle doors must be closed and locked
prior to remote start sequence.
Time restriction. Complete steps 2 to 5 within
45 seconds.
Press unlock on OEM or aftermarket remote
or request switch.
Open driver door and enter vehicle.
Close driver door.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in
vehicle engine shutdown.
PAGE 7 OF 9
U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
Question 1: Do the doors lock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
Question 2: Do the doors unlock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 6: Does the vehicle remote start?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
Question 7: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
17 Wait for the vehicle to start.
18 Press brake pedal.
Question 10: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once
[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHECKLIST - WITH AFTERMARKET KEYFOB
PAGE 8 OF 9
U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 2 OF 2
CHECKLIST - WITH OEM KEYFOB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
YES: Go to next step.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
PAGE 9 OF 9
U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
U.S. Patent No. 8,856,780
20171101
REVISION DATE
FT-RSA-MA3-[FT-DC2-S]FIRMWARE
FT-DC2-SHARDWARE
ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)
ACCESSORIES
DOCUMENT NUMBER
2017-2018 MAZDA CX-5 PTS AT
www.idatalink.comAutomotive Data Solutions Inc. © 2017
INSTALL GUIDE
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
T008_H
T-HARNESS / COMPONENT LOCATOR - 1 OF 1
C
AB
PAGE 2 OF 9
U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
MS1
VS2
VS1
VS4
VS3
T008_H
1
8
2
9
3
10
4
11
5
12
6
13
7
14
MS2
2
2 31 4 65
2
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
T-HARNESS / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
START STOP UNIT, UNDER STEERING COLUMN (A)
1 2
2020
010102020303
1212
04040505060607070808090910101111
01010202030304040505060607070808090910101111
131314141515161617171818
010102020303040405050606
01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT080809091010
12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT
1919
RELAY
1: WHITE
2: WHITE
2: VEHICLE HARNESS
1: VEHICLE HARNESS
CLOCK SPRING (B)
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
HORN (-) PURPLE - 01
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT
GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
1
(SWITCH SIDE)
(CONNECTOR SIDE)
1: WHITE
HOOD SWITCH
!
M3
M2M5M4
PAGE 3 OF 9
U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
T008_W
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
C
AB
PAGE 4 OF 9
U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
8 77 6 5 4 3 2 110 9
20212223 14 131819
12 11
17 16 1524
2
18
3
19
1
17
9
25
10
26
4
20
11
27
8
24
6
22
7
23
5
21
12
28
13
29
14
30
15
31
16
32
T008_W
1
8
2
9
3
10
4
11
5
12
6
13
7
14
1
1
2 31 4 65
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
HARDWIRE / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT
01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT
20 BLACK - GROUND (-)20 BLACK - GROUND (-)
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
GROUND (-) BLACK - 13
ACCESSORY (+) PINK - 14
KEYLESS (DATA) GREEN - 09
CANH (DATA) WHITE - 07
CANL (DATA) RED - 08
IGNITION (+) PINK - 10
12 (+) YELLOW - 12
PTS (-) RED - 17
STARTER (+) BROWN - 23
START STOP UNIT, UNDER STEERING COLUMN (A)
1: WHITE
2: WHITE
1 2
19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT
12 WHITE•BLACK DOT12 WHITE•BLACK DOT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT
01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE
06 WHITE•BLUE DOT06 WHITE•BLUE DOT
CLOCK SPRING (B)
HORN (-) PURPLE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
02 WHITE/BLACK•BLU DOTE - IGNITION (+)02 WHITE/BLACK•BLU DOTE - IGNITION (+)
04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT
03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE
IGNITION (+) PURPLE - 17
PARKING LIGHT 2 (-) GREEN - 04
PARKING LIGHT 1 (-) YELLOW - 03
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
HOOD SWITCH
1
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
1: WHITE
!
M3
M2M5M4
PAGE 5 OF 9
U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
ENGINE
START
STOP
STOP ACC ON STARTON
02
03
04
ENGINE
START
STOP
STOP ACC ON STARTSTOP
05
06
07
08
ENGINE
START
STOP
STOP ACC ON STARTON
09
10
11
ENGINE
START
STOP
STOP ACC ON STARTSTOP
>>
12
ENGINE
START
STOP
STOP ACC ON STARTSTART
13
14
15
16
MODULE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: All vehicle doors must be closed
and locked prior to remote start sequence.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait 10 seconds, LED 1 will flash GREEN
rapidly.
Set ignition to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
Connect power first. Connect module to
vehicle.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait, LED 1 will turn solid GREEN for 2
seconds.
Set ignition to OFF position.
If vehicle is equipped with power liftgate: open
and close the power liftgate with OEM keyfob.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN. Module
Programming Procedure completed.
PAGE 6 OF 9
U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
02
03
04
05
06
>>
TAKEOVER PROCEDURE - 1 OF 1
All vehicle doors must be closed and locked
prior to remote start sequence.
Time restriction. Complete steps 2 to 5 within
45 seconds.
Press unlock on OEM or aftermarket remote
or request switch.
Open driver door and enter vehicle.
Close driver door.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in
vehicle engine shutdown.
PAGE 7 OF 9
U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
Question 1: Do the doors lock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
Question 2: Do the doors unlock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 6: Does the vehicle remote start?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
Question 7: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
17 Wait for the vehicle to start.
18 Press brake pedal.
Question 10: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once
[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHECKLIST - WITH AFTERMARKET KEYFOB
PAGE 8 OF 9
U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 2 OF 2
CHECKLIST - WITH OEM KEYFOB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
YES: Go to next step.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
PAGE 9 OF 9
U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
U.S. Patent No. 8,856,780
20171101
REVISION DATE
FT-RSA-MA3-[FT-DC2-S]FIRMWARE
FT-DC2-SHARDWARE
ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)
ACCESSORIES
DOCUMENT NUMBER
2016-2018 MAZDA CX-9 PTS AT
www.idatalink.comAutomotive Data Solutions Inc. © 2017
INSTALL GUIDE
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
T006_H
T-HARNESS / COMPONENT LOCATOR - 1 OF 1
A
C
B
PAGE 2 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
MS1
VS2
VS1
VS4
VS3
T006_H
1
8
2
9
3
10
4
11
5
12
6
13
7
14
MS2
1
1
87654321
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
T-HARNESS / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
START STOP UNIT, UNDER STEERING COLUMN (A)
2020
010102020303
1212
04040505060607070808090910101111
010102020303040405050606070708080909
1111
131314141515161617171818
010102020303040405050606
0101020203030404050506060707080809091010
RELAY
1: WHITE
2: WHITE
1 22: VEHICLE HARNESS
1: VEHICLE HARNESS
(SWITCH SIDE)
1212
1919
CLOCK SPRING (B)
HORN (-) WHITE/BLACK - 01
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT
GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOT
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) BLACK - 02
PARKING LIGHT 1 (-) BLUE - 01
11: WHITE
HOOD SWITCH
(CONNECTOR SIDE)
!
M3
M2M5M4
PAGE 3 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
T006_W
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
A
C
B
PAGE 4 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
8 77 6 5 4 3 2 110 9
20212223 14 131819
12 11
17 16 1524
2
18
3
19
1
17
9
25
10
26
4
20
11
27
8
24
6
22
7
23
5
21
12
28
13
29
14
30
15
31
16
32
T006_W
1
8
2
9
3
10
4
11
5
12
6
13
7
14
1
1
87654321
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
HARDWIRE / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT
01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT
20 BLACK - GROUND (-)20 BLACK - GROUND (-)
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
GROUND (-) BLACK - 13
CANH (DATA) PINK OR GREEN - 07
CANL (DATA) GREEN/RED OR BLUE - 08
IGNITION (+) LTBLUE OR BROWN - 10
12V (+) GREEN OR RED - 12
PTS (-) GRAY - 17
STARTER (+) YELLOW/BLACK - 23
START STOP UNIT, UNDER STEERING COLUMN (A)
1: WHITE
2: WHITE
1 2
19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT
ACCESSORY (+) GRAY OR TAN - 14
12 WHITE•BLACK DOT12 WHITE•BLACK DOT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT
06 WHITE•BLUE06 WHITE•BLUE
CLOCK SPRING (B)
HORN (-) WHITE/BLACK - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
KEYLESS (DATA) BLUE - 09
01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) BLACK - 02
PARKING LIGHT 1 (-) BLUE - 01
11: WHITE
HOOD SWITCH02 WHITE/BLACK•BLUE DOT - IGNITION 2 (+)02 WHITE/BLACK•BLUE DOT - IGNITION 2 (+)
04 WHITE/RED•BLUE - IGNITION 2 (+)04 WHITE/RED•BLUE - IGNITION 2 (+)05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT
03 GRAY/RED•BLUE DOTDOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOTDOT - PARKING LIGHT 2 (-) CONNECTOR SIDE
IGNITION 2 (+) RED/BLACK - 17
!
M3
M2M5M4
PAGE 5 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
ENGINE
START
STOP
STOP ACC ON STARTON
02
03
04
ENGINE
START
STOP
STOP ACC ON STARTSTOP
05
06
07
08
ENGINE
START
STOP
STOP ACC ON STARTON
09
10
11
ENGINE
START
STOP
STOP ACC ON STARTSTOP
>>
12
ENGINE
START
STOP
STOP ACC ON STARTSTART
13
14
15
16
MODULE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: All vehicle doors must be closed
and locked prior to remote start sequence.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait 10 seconds, LED 1 will flash GREEN
rapidly.
Set ignition to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
Connect power first. Connect module to
vehicle.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait, LED 1 will turn solid GREEN for 2
seconds.
Set ignition to OFF position.
If vehicle is equipped with power liftgate: open
and close the power liftgate with OEM keyfob.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN. Module
Programming Procedure completed.
PAGE 6 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
02
03
04
05
06
>>
TAKEOVER PROCEDURE - 1 OF 1
All vehicle doors must be closed and locked
prior to remote start sequence.
Time restriction. Complete steps 2 to 5 within
45 seconds.
Press unlock on OEM or aftermarket remote
or request switch.
Open driver door and enter vehicle.
Close driver door.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in
vehicle engine shutdown.
PAGE 7 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
Question 1: Do the doors lock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
Question 2: Do the doors unlock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 6: Does the vehicle remote start?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
Question 7: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
17 Wait for the vehicle to start.
18 Press brake pedal.
Question 10: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once
[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHECKLIST - WITH AFTERMARKET KEYFOB
PAGE 8 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 2 OF 2
CHECKLIST - WITH OEM KEYFOB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
YES: Go to next step.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
PAGE 9 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
U.S. Patent No. 8,856,780
20171101
REVISION DATE
FT-RSA-MA3-[FT-DC2-S]FIRMWARE
FT-DC2-SHARDWARE
ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)
ACCESSORIES
DOCUMENT NUMBER
2016-2018 MAZDA MX-5 PTS AT
www.idatalink.comAutomotive Data Solutions Inc. © 2017
INSTALL GUIDE
NOTICE
The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
T007_H
T-HARNESS / COMPONENT LOCATOR - 1 OF 1
A
C
B
PAGE 2 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
MS1
VS2
VS1
VS4
VS3
T007_H
1
8
2
9
3
10
4
11
5
12
6
13
7
14
MS2
1
1
87654321
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
T-HARNESS / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
START STOP UNIT, UNDER STEERING COLUMN (A)
2020
010102020303
1212
04040505060607070808090910101111
010102020303040405050606070708080909
1111
131314141515161617171818
010102020303040405050606
0101020203030404050506060707080809091010
RELAY
1: WHITE
2: WHITE
1 22: VEHICLE HARNESS
1: VEHICLE HARNESS
(SWITCH SIDE)
12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT
1919
CLOCK SPRING (B)
HORN (-) PINK - 01
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT
GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOT
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) BLACK - 02
PARKING LIGHT 1 (-) BLUE - 01
11: WHITE
HOOD SWITCH
(CONNECTOR SIDE)
!
M3
M2M5M4
PAGE 3 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
T007_W
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
A
C
B
PAGE 4 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
!
8 77 6 5 4 3 2 110 9
20212223 14 131819
12 11
17 16 1524
2
18
3
19
1
17
9
25
10
26
4
20
11
27
8
24
6
22
7
23
5
21
12
28
13
29
14
30
15
31
16
32
T007_W
1
8
2
9
3
10
4
11
5
12
6
13
7
14
2
2
1
1
87654321
CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY
HARDWIRE / WIRING DIAGRAM - 1 OF 1
M5
M4
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT
01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT
20 BLACK - GROUND (-)20 BLACK - GROUND (-)
07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT
GROUND (-) BLACK - 13
CANH (DATA) WHITE - 07
CANL (DATA) RED - 08
IGNITION (+) LTGREEN - 10
12V (+) RED - 12
PTS (-) GRAY - 17
STARTER (+) BROWN - 23
START STOP UNIT, UNDER STEERING COLUMN (A)
1: WHITE
2: WHITE
1 2
19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT
OPTIONAL12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT
06 WHITE•BLUE06 WHITE•BLUE
CLOCK SPRING (B)
HORN (-) PINK - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
KEYLESS (DATA) YELLOW - 09
01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE
PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)
INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE
SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,
FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.
PARKING LIGHT 2 (-) BLACK - 02
PARKING LIGHT 1 (-) BLUE - 01
11: WHITE
HOOD SWITCH02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)
04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT05 GRAY•BLUE DOT
03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE
IGNITION (+) BROWN - 17
!
M3
M2M5M4
PAGE 5 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
ENGINE
START
STOP
STOP ACC ON STARTON
02
03
04
ENGINE
START
STOP
STOP ACC ON STARTSTOP
05
06
07
08
ENGINE
START
STOP
STOP ACC ON STARTON
09
10
11
ENGINE
START
STOP
STOP ACC ON STARTSTOP
>>
12
ENGINE
START
STOP
STOP ACC ON STARTSTART
13
14
15
16
MODULE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: All vehicle doors must be closed
and locked prior to remote start sequence.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait 10 seconds, LED 1 will flash GREEN
rapidly.
Set ignition to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
Connect power first. Connect module to
vehicle.
Set ignition to ON position.
Wait, LED 1 will turn solid RED to confirm that
the ignition is ON.
Wait, LED 1 will turn solid GREEN for 2
seconds.
Set ignition to OFF position.
If vehicle is equipped with power liftgate: open
and close the power liftgate with OEM keyfob.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN. Module
Programming Procedure completed.
PAGE 6 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
>>
01
02
03
04
05
06
>>
TAKEOVER PROCEDURE - 1 OF 1
All vehicle doors must be closed and locked
prior to remote start sequence.
Time restriction. Complete steps 2 to 5 within
45 seconds.
Press unlock on OEM or aftermarket remote
or request switch.
Open driver door and enter vehicle.
Close driver door.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in
vehicle engine shutdown.
PAGE 7 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
Question 1: Do the doors lock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
Question 2: Do the doors unlock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 6: Does the vehicle remote start?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
Question 7: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
17 Wait for the vehicle to start.
18 Press brake pedal.
Question 10: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once
[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHECKLIST - WITH AFTERMARKET KEYFOB
PAGE 8 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101
INSTALLATION CHECKLIST - 2 OF 2
CHECKLIST - WITH OEM KEYFOB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
YES: Go to next step.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
YES: Go to next step.
NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
PAGE 9 OF 9
U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN
20171101