Embed Size (px)
Citation preview
M2M CAPTURE SOFTWARE
I NSTALLATION GUIDE
June 2019 | Ref : CAPTURE_INSTALLATION_GUIDE_how_to_install_CAPTURE_US - B
SUMMARY
INSTALLATION OF…
1. CAPTURE SOFTWARE ON THE DEVICE
2. CAPTURE PC
3. CAPTURE VIEWER
Current release
CAPTURE SOFTWARE
INSTALLATION PROCEDURE (1/6)
1. Download the « Capture_Update_3.X.cap » file on the
website.
2. Copy the « Capture_Update_3.X.cap » file on the root
of a USB disk.
3. On GEKKO or MANTIS, press to access to the
general settings.
Note: This process shall be done with the equipment
connected to the AC Power supply.
Current release
CAPTURE SOFTWARE
INSTALLATION PROCEDURE (2/6)
4. Press on “Upgrade”.
CAPTURE SOFTWARE
Current release
INSTALLATION PROCEDURE (3/6)
5. The name of the release 3.X. appears. Press on
“Upgrade”.
Current release
CAPTURE SOFTWARE
INSTALLATION PROCEDURE (4/6)
5. Repository update.
If you press ”Yes”, you will update all the libraries (specimens,
probes, and scanner) and the applications. This procedure
will not erase the existing user files. Only the files installed
within our repository and with the same name will be replaced.
If you press “No” the libraries will not be updated.If you need
later to update the libraries, download
“Capture_Repository_Update_3.X.cap” and install them as
specified in INSTALLATION PROCEDURE 1/6
Note: If you want to remove some or all libraries, you can delete
all the folders and install the new repository.
CAPTURE SOFTWARE
Current release
INSTALLATION PROCEDURE (5/6)
7. Wait the reboot of your device
CAPTURE SOFTWARE
INSTALLATION PROCEDURE (6/6)
8. The new release is now available
In case of problem, please contact the support team
Current new release
CAPTURE PC
INSTALLATION PROCEDURE (1/2)
PC CONFIGURATION NEEDS
- Operating system: Windows 7 /Windows 8/ Windows 10
- Archive management tool (7z, WinRAR, WinZip...)
1. Download the « Capture_PC_3.x.exe » file and extract the contents (folder location
free).
Extracting operation generates the « Capture_PC_3.x » folder.
2. Windows UAC configuration
Better to have the Admin rights at any time to use the CAPTURE PC software.
CAPTURE PC
For this reason, you need to configure the windows UAC at the
minimum level (see next page)
INSTALLATION PROCEDURE (2/2)
2. Windows UAC configuration
- Go to user account then Modify the user account parameters in
the Control panel
- Set the scale button to its minimum level as shown on the right
picture
Once all steps are done, restart your PC
CAPTURE PC
LAUNCHING CAPTURE PC
Once PC restarted, connect the dongle on your computer.
Execute the « Go_Capture.bat » file located in the «
Capture_PC_3.x » folder.
If your PC is Windows 8 operated, you need to « execute as
Admin » after right-click on the Go_Capture file.
- The CAPTURE Home page should appear as shown on the
right picture
• If a crash occurs, please repeat the installation steps and try
again.
• In case of problems, please contact
CAPTURE VIEWER
INSTALLATION PROCEDURE (1/2)
You don’t need a dongle to launch the Capture Viewer
1. Upload and extraction of the file.
• Copy the file “Capture_Viewer_3.X.exe” on your computer.
• Double-click on the file.
• Select the saving location then extract.
CAPTURE VIEWER
INSTALLATION PROCEDURE (2/2)
2. Launch the viewer
• To launch the software, open the file
“Capture_Viewer_3.X.exe” and double-click on
“Go_Capture_Viewer.bat”.
CAPTURE VIEWER
LAUNCHING CAPTURE VIEWER
2. Launch the viewer
• The CAPTURE viewer Home page is displayed.
CAPTURE VIEWER
LOAD YOUR FILE (2/2)
3. Import your file
• Click on the import button to import inspection files
from the computer or an external drive.
• Select the inspection file from the Home panel then press
Start to begin the analysis.
CAPTURE VIEWER
START THE ANALYSE
4. Open the inspection file and start the analyse
• The viewer software offers basic analysis tools.
• Please refer to the document GEKKO_New features_US-A
and to the GEKKO user manual for further information
about the analysis tools.
contact - [email protected]
