Installation Guide - Midland Valley · PDF fileMove Link for Petrel v2014.1..... 13 System Requirements ... We recommend that you should be a power/administrator user on Windows to

Installation Guide

(Version 2014.1)

Midland Valley Exploration Ltd

144 West George Street

Glasgow G2 2HG United Kingdom

Tel: +44 (0) 141 3322681

Fax: +44 (0) 141 3326792 www.mve.com

Table of Contents

1. Move2014 Software and Supporting Documentation ............................................... 3

Contents: .................................................................................................................. 3

2. System Requirements ............................................................................................. 4

Operating Systems ..................................................................................................... 4

Graphics Card ............................................................................................................ 4

Hardware .................................................................................................................. 5

Workstation/Desktop .................................................................................................. 5

Laptop/Notebook ........................................................................................................ 5

Screen/Monitor .......................................................................................................... 5

3. Installing Move ....................................................................................................... 6

Installing on Windows ................................................................................................. 6

License Agreement ..................................................................................................... 6

Installation Folder ...................................................................................................... 6

License Manager Components ...................................................................................... 7

Uninstalling Move on Windows ..................................................................................... 7

Uninstalling Licensing Service on Windows .................................................................... 7

Using Windows Remote Desktop .................................................................................. 8

Installing on Linux ...................................................................................................... 9

Extracting the software ............................................................................................... 9

Running the setup scripts ............................................................................................ 9

License Agreement ................................................................................................... 10

License Manager Components .................................................................................... 10

Uninstalling Move on Linux ........................................................................................ 10

Uninstalling Licensing Service on Linux ....................................................................... 10

Configuring OpenGL on Linux ..................................................................................... 10

Installing on MacOS X ............................................................................................... 11

License Manager Component ..................................................................................... 11

Uninstalling Move on MacOS X ................................................................................... 11

4. Move licensing ....................................................................................................... 12

5. Move Link for Petrel v2014.1 ................................................................................. 13

System Requirements ............................................................................................... 13

Software ................................................................................................................. 13

Operating System .................................................................................................... 13

Installation .............................................................................................................. 13

6. Move Link for OpenWorks R5000........................................................................... 15

Introduction............................................................................................................. 15

Software ................................................................................................................. 15

Operating System .................................................................................................... 15

Installation (client) ................................................................................................... 15

7. Contacting Midland Valley ..................................................................................... 17

Midland Valley Move2014.1 Installation Guide

3

1. Move2014 Software and Supporting

Documentation

Contents:

Move installer

MoveViewer installer

FieldMove installer

Midland Valley Licence Manager (FLEXnet 11.1) software

Move Link for Petrel installer

Move2014 Software Installers

Move2014.1.0/Windows64 Installers for Windows (64-bit)

Move2014.1.0/Linux64 Archive for Linux (64-bit)

Move2014.1.0/Mac64 Installers for Mac (64-bit)

FieldMove2014 Software Installers



MoveViewer 2014 Software Installers


Move2014.1.0/Linux64 Archive for Linux (64-bit)


License Manager Software

LicenseManager/FLEXnet11.1/Windows64 Licence Manager for Windows (64-bit)

LicenseManager/FLEXnet11.1/Linux64 Licence Manager for Linux (64-bit)

LicenseManager/FLEXnet11.1/Mac64 Licence Manager for Mac (64-bit) LicenseManager/FLEXnet11.1/docs License Manager Documentation

Move2014.1 documentation

The following documents are provided with Move2014 and also can be found in the Client section of our website (www.mve.com/clients).

Move2014 Release Notes

Move2014 Installation Guide

Move2014 Licensing Guide

Move2014 Tutorials

MoveViewer 2014 Installation Guide

FieldMove2014 Installation Guide

http://www.mve.com/

http://www.mve.com/


4

2. System Requirements

Operating Systems

Please check to ensure you have at least the minimum specification before installing:

Windows: 64-bit versions of Windows Vista, Windows 7 or Windows 8 Windows requires .NET Framework 4.0 or higher.

Recommend Windows 7 64-bit, SP1, Enterprise or Ultimate editions.

Linux: Linux Red Hat Enterprise 5 and 6 (64-bit only).

Move may run on other distributions of Linux however, these have not been tested. For optimal video performance with OpenGL when using an NVIDIA video card under Linux, it is recommended that you use the accelerated drivers provided by NVIDIA on their website www.nvidia.com.

Mac: OS X 10.7 and up (64-bit only).

Using Move in a virtual machine (with Mac OSX as guest) is not supported.

Graphics Card

Move is a graphics intensive application and takes advantage of modern hardware GPUs in order to speed up 3D rendering. In some algorithmic operations Move also offloads parallel operations to the GPU to deliver faster computational results. The more memory on the graphics card the better Move will handle larger DEM and Image/Seismic data.

Graphics Card requirements (Notebook or Workstation):

1GB of RAM

Graphics card drivers fully up to date

Run pixel shader 2 or later

Be OpenGL compatible

Workstation Graphics Card Recommended:

NVIDIA with 2GB RAM

Workstation Graphics Card Preferred:

NVIDIA with > 2GB RAM - Quadro 6000, K5000, 4000, 2000

Notebook Graphics Card Recommended:

NVIDIA with 1GB RAM

../Move2010/originals/www.nvidia.com

5

Notebook Graphics Card Preferred:

NVIDIA with > 2GB RAM - Quadro M series, NVIDIA Geforce GTX/GT M series

Move will take advantage of standard GPU processing on the graphics card for 3D rendering. The Move Sediment Modelling module will optionally run a CUDA GPU version for maximum speed

depending on the hardware available. See the Sediment Modelling section in the Release Notes for further information.

Hardware

The following list of is provided as a general guide only. If your system configuration is different

and you are unsure of its capability then please email us: [email protected] with your system

details for further information. The hardware requirements greatly depend on the size of data sets you are using. If you are working with large data sets and utilising Move applications simultaneously then we would strongly suggest the following recommendations.

Workstation/Desktop

For example, Dell Precision T7610/T5610/T3610;Apple iMac, Apple Mac Pro.

Specification Recommended Minimum Recommended Ideal

CPU Single 2.0 GHz

Dual core CPU

One or Two 2.5+ GHz or faster CPUs

Each CPU Dual/Quad/Six-core

Memory 4 GB 8-32GB+

Laptop/Notebook

For example Dell Precision M3800 15”, M4800 15”, M6800 17”; Apple Macbook Pro 15”.

Specification Recommended Minimum Recommended Ideal

CPU 1.8 GHz Dual-core CPU 1.8 GHz+ Dual/Quad/Six core CPU

Memory 4 GB 4-16 GB

Screen/Monitor

Minimum screen resolution is a single monitor/screen with 1280x1024 pixels.

Move is a graphics intensive application supporting multiple simultaneous views of your data model, and we recommend as much screen space as you can afford in order to maximise your

experience and attention to detail.

Move will support dual monitors which are recommended at 24” in size and above.

Move supports the Macbook Pro Retina display, which is recommended.

../Move2010/originals/[email protected]


6

3. Installing Move

Windows, Linux and Mac have different installation instructions. Please refer to the

appropriate section below.

Installing on Windows

We recommend that you should be a power/administrator user on Windows to install or

with UAC elevated to administrator to install on Windows Vista and Windows 7.

To begin the installation process you must browse to the installer file, for example:

USB-Drive:\Move2014.1\Windows64\move_2014_1_windows_64-bit.exe

License Agreement

To continue with installation please accept the terms of the license agreement and click

Next.

Installation Folder

Select the folder in which you wish to install Move. You may select your own location by

clicking Choose or by typing the explicit location in the input box. You may accept the

default location which is C:\Program Files\Midland Valley\Move2014.1

7

License Manager Components

The Move installer will install a FLEXnet License Manager Windows Service as part of the

post-install process. This service MUST be installed. If you wish to run Move from a

network drive location, or copy/script a custom Move set-up, then please contact

Midland Valley for further instructions. Upon successful installation you should see

something like this in the Windows Services via the Administration Tool:

Uninstalling Move on Windows

Please use the Control Panel to uninstall Move.

Uninstalling Licensing Service on Windows

Upon successful installation you should see something like this in the Windows Services

via the Administration Tool.

You can remove the Windows Service using the above tool.

Alternatively you can remove the FLEXnet service via a Command Console:

C:\ sc delete "FLEXnet Licensing Service 64"

C:\ sc delete "FLEXnet Licensing Service"


8

Using Windows Remote Desktop

When connecting to a remote system using Microsoft’s Remote Desktop Services you

may experience issues when using larger models. This is due to limitations with the

software OpenGL driver that is used when using the remote connection. There are

several ways to work around such issues:

Use another remote display application that uses the hardware capabilities of the host

machine.

Start Move on the host machine BEFORE connecting to it. This requires physical access

to the host system.

Use the alternate software OpenGL drivers provided with Move. These are located in the

bin/mesa3d folder inside the location where Move was installed. When Move senses that

it is running remotely then it will prompt the user that the software drivers are being

copied into the bin folder and being utilised.

9

Installing on Linux

We recommend you should have root permission or be the root user on Linux to install.

Installing Move on Linux is a straight forward process of extracting the software from the

archive and running a script which will prompt for required input at the appropriate time.

The software can be installed anywhere, the following instructions assume it will be

installed in /opt/MVE.

Extracting the software

Move is bundled in compressed tar archive. To extract the software, follow these steps:

1. Go to destination directory:

prompt# mkdir -p /opt/MVE ; cd /opt/MVE

2. Copy tgz file:

prompt# cp USB_Drive/Move2014.1/Linux64/ move_2014.1_linux_66-

bit.tgz .

3. Extract archive

prompt# tar zxf move_2014.1_linux_64-bit.tgz

This will create a Move2014.1 folder containing the software.

Running the setup scripts

You now need to run the setup script which will complete the installation process.

1. Go to license_bin_utils directory:

prompt# cd /opt/MVE/Move2014.1/license

2. Run FLEXnet License Service set-up script

prompt# ./install_fnp.sh

3. Go to bin directory:

prompt# cd /opt/MVE/Move2014.1/bin

4. Run Move set-up script

prompt# ./setup.sh

Do you wish to install Move in '/opt/MVE/Move2014.1/bin' [Y/n]?

Do accept the terms of the license agreement [Y/n/v]?

Do you wish to install the Move tutorials [Y/n]?

Do you wish to clean up the intermediate files [Y/n]?

5. As shown above, you will be prompted for various information. The default

answer is shown in upper case; hit the Return key to accept it. Otherwise, type y

or n and hit the Return key to accept it.

Confirm location

Intermediary files (archives containing examples) can be removed to free up

disk space. It may however be useful to keep them as end users may wish to

install local copies elsewhere.


10

6. Once the setup script completes, it will display the installation log (saved in

/opt/MVE/Move2014.1/install.log). Any errors will be saved in that file.

7. To start Move, please use the ‘move’ script generated during the installation (do

not run the Move application directly).

prompt# /opt/MVE/Move2014.1/bin/move

License Agreement

To continue with installation accept the terms of the license agreement and click Next.

License Manager Components

The process outlined above will install a FLEXnet License Manager Service as part of the

pre-install process –using the setup_fnp.sh script. This service MUST be installed. If

you wish to run Move from a network location, or script a custom Move set-up, then

please contact Midland Valley for further instructions.

Uninstalling Move on Linux

Remove the entire installation directory using the following command:

prompt# /bin/rm -rf /opt/MVE/Move2014.1

Uninstalling Licensing Service on Linux

Remove the entire installation directory using the following command depending on 32-

bit or 64-bit:

prompt# /bin/rm –rf /usr/local/share/FNP/service64/11.11.0 OR

prompt# /bin/rm –rf /usr/local/share/FNP/service/11.11.0

Configuring OpenGL on Linux

On systems using nVidia Quadro 4* series cards, the drive may need to be configured to

disable VBlank and flipping. As illustrated below, open nvidia-settings application and

make sure both check boxes are NOT ticked.

11

Installing on MacOS X

MacOS distribution comes in three separate DMG archives. To install any one:

Double click on the dmg file in Finder,

Accept the terms of the licensing agreement,

Drag and Drop the application in the new window to the /Applications folder.

License Manager Component

Move will require license configuration after first launch. See details in the Move2014.1 Licensing Guide. If set it up is required manually, the install_fnp.sh script can be

found in the DMG inside the Utilities/license folder.

Uninstalling Move on MacOS X

Drag and drop the Move application from the /Applications folder into the Trash.


12

4. Move licensing

Please refer to the Move2014.1 Licensing Guide which can be found on the release

USB package and in the Client section of www.mve.com.

http://www.mve.com/


13

5. Move Link for Petrel v2014.1

The Move Link for Petrel provides a means for Petrel* users to share and transfer data

with Midland Valley's Move product.

Once installed, the Link allows the Petrel user to specify objects within the input tree to

send across to the Move application of the Move Suite. Once in Move, it is then possible

to perform model building, editing and analysis or utilise functionality within the

modelling modules to perform restoration, validation, balancing, geomechanical

modelling, fracture modelling and sediment modelling on the transferred objects (if

licenses for these modules have been purchased and are available).

*Mark of Schlumberger

System Requirements

Software

To use the Move Link for Petrel (version 2014.1), users are required to have a valid

licence of:

Midland Valley’s Move application 2014.1

Schlumberger’s Petrel seismic to simulation software version 2013.x or 2012.x

Move Link for Petrel version 2014.1 from Midland Valley. For clarification on

compatibility please email [email protected].

Operating System

Petrel is a Windows only product and therefore the Move Link for Petrel will only be

available where all products are running on Windows. See the Move system

requirements and the Petrel software system requirements for details.

Installation

As of Petrel 2011, Move Link for Petrel is installed via the Ocean Plugin manager.

To install for Petrel 2013:

Select Ocean Plugin Manager from the help menu.

Select Install plugin.

Browse to MoveLink.pip from the installation disk.

Close down Petrel.

When Petrel is restarted, the Move Link will be visible in the Processes pane.

mailto:[email protected]


14

It is recommended that the plugin is installed using administrator privileges.

Move Version Petrel Version Move Link for Petrel Version (via pip or msi)

2014.1 (64-bit) 2013.x (64-bit) Move_2014.1_link_for_Petrel_2013_64-bit

2014.1 (64-bit) 2012.x (64-bit) Move_2014.1_link_for_Petrel_2012_64-bit


15

6. Move Link for OpenWorks R5000

Introduction

The Move Link for OpenWorks R5000 provides a means for Landmark OpenWorks users

to share and transfer data with Midland Valley's Move Application of the Move Suite.

The Link allows the Move user to directly import objects within an OpenWorks R5000

database via the input tree to send them across to Move. Once in Move, it is then

possible to perform model building, editing and analysis or utilise functionality within the

modelling modules to perform restoration, validation, balancing, geomechanical

modelling, fracture modelling and sediment modelling on the transferred objects (if

licenses for these modules have been purchased and are available).

Software

To use the Move Link for OpenWorks R5000, users are required to have a licence of:

Move Link for OpenWorks R5000 software from Midland Valley.

Move software from version Move2014.1 from Midland Valley.

Linux - Landmark OpenWorks software from version 5000.8.3.0 back.

Windows - Landmark OpenWorks software from version 5000.8.3.0 back.

Oracle software version 11g onwards.

For clarification on compatibility please email [email protected].

Operating System

Please check to ensure you have at least the minimum specification before installing:

Windows: Microsoft Windows Vista, Windows 7 (64-bit).

Linux: Linux Red Hat Enterprise 5 and 6 (64-bit).

Installation (client)

The Link will work whether running Move from the same machine as OpenWorks is

installed on or alternatively from a client machine on the network that can see the

OpenWorks and Oracle installations.

Linux Move clients should ensure that Oracle and OpenWorks installations are on your

PATH and LD_LIBRARY_PATH and visible on the network. Optionally on Linux you can

install a local client of Oracle software.

Windows clients MUST install Oracle client and OpenWorks client software before you run

Move. See the installation guides from these products for more information. Midland



16

Valley do not supply Oracle or Landmark OpenWorks clients; these can be obtained as

part of your own OpenWorks installation - contact your own local OpenWorks

administrator.

Some environment variables that need to be set or will help set-up include:

OWHOME, OW_ORACLE_USER OW_HOME_DIR


17

7. Contacting Midland Valley

Support Email address

Licensing & Technical [email protected]

Geological [email protected]

Additional Licences [email protected]

Contact Details

Midland Valley Exploration Ltd +44 (0) 141 332 2681

144 West George Street +44 (0) 141 332 6792

Glasgow

G2 2HG [email protected]

UNITED KINGDOM www.mve.com

Copyright © 2014 Midland Valley

Move, 2DMove, 3DMove, FieldMove and MoveViewer are either registered trademarks or

trademarks of Midland Valley Exploration Ltd.

Petrel, *Mark of Schlumberger





http://www.mve.com/

Documents

Installation Guide - Midland Valley · PDF fileMove Link for Petrel v2014.1..... 13 System Requirements ... We recommend that you should be a power/administrator user on Windows to