2
3. Select Posts (Fence...1-1/2" or 2" sq.; Gate...3" sq.) Select type: In-ground or surface mount In-Ground: 1-1/2" (60"H, 66"H or 84"H) and 2" (72"H or 96"H) Surface Mount: 37"H, 43"H or 61"H Flat caps standard - ball caps available on all posts Fenced Area 30’ Wide x 36’ Deep Building www.gilpininc.com • 800.348.0746 Steel Fence Styles Building codes Always check local building codes before starting an installation. Compliance with building codes is the installer’s responsibility Fence & Gate Selection 21 - 6'W fence sections 21 - packages of attachment fittings 20 - fence posts 2 - gate posts 1 - gate Installation Examples Installation Planning Fence & Gate Selection Determining your needs After you have measured installation area, use this chart to record items you will need for installation. Item Qty. Specifications Steel Pickets Picket Spacing Post Spacing Rails Posts Gate Posts Fence 1/2" Square (Tube or Solid) 4" or 6" o.c. 74" o.c. for 6'W Panel (when using 2" posts) 1-1/4" x 1-1/4" 1-1/2" or 2" square 3" square Steel Fence and Gate Information Five unique styles Steel fence and gate are coated with a black, baked-on enamel. Mounting hardware, cuts, holes, and scrapes must be painted with rust resistant paint. Posts and accessories sold separately. 4" o.c. spindle spacing (6" available on Metalist and Embassy). Styles available to meet many codes. Fence panels are 4’or 6’wide up to 72”installed height. Matching gates available. Metalist Embassy Deco Oasis Triton Embassy 1. Select Fence Size Select installed height: 36"H, 42"H, 60"H or 66"H (panel height is 4" less than installed height.) Select panel width: 4' or 6' Select spindle spacing: 4" or 6" (spindles are 1/2" square) Adjusts for slopes Deco, Oasis or Triton 1. Select Fence Size Select installed height: 48"H or 72"H (panel height is 3" less than installed height.) Select panel width: 4' or 6' Select spindle spacing: 4" (spindles are 1/2 square) 2. Select Fitting Sets One set required for each fence panel 3. Select Posts (Fence...2" square; Gate...3” square) Select type: In-ground or surface mount In-Ground: 72"H or 96"H Surface Mount: 43"H or 73"H Flat caps standard - ball caps available on all posts 4. Select Gate Size Select installed height: 36"H, 48"H, 60"H or 72"H Select width of Gate: 3'W or 4'W Please specify rough opening size Hinges and latch included Gate Options: self-closing spring, lock box, latch and cane bolt Metalist 1. Select Fence Size Select installed height: 36"H, 48"H, 60"H or 72"H (panel height is 2" less than installed height.) Select panel width: 4' or 6' Select spindle spacing: 4" or 6" (spindles are solid 1/2" square) Standard price does not include decorative finial No FInial Spear Point Spanish Fleur-de-Lis 5-1/2" 2. Select Fitting Sets One set required for each fence panel 2. Select Finials Select from Spear Point, Spanish, or Fleur-de-Lis 3. Select Fitting Sets One set required for each fence panel 4. Select Posts (Fence...2” square; Gate...3” square) Select type: In-ground or surface mount In-ground: 60"H, 72"H, 84"H or 96"H Surface mount: 37"H, 49"H or 61"H Flat caps standard - ball caps available on all posts 5. Select Gate Size Select installed height: 36"H, 48"H, 60"H or 72"H Select width of Gate: 3'W or 4'W Please specify rough opening size Hinges and latch included Add finials to match fence style Gate Options: self-closing spring, lock box, latch and cane bolt 4. Select Gate Size Select installed height: 36"H, 42"H or 60"H Select width of Gate: 3'W or 4'W Please specify rough opening size Hinges and latch included Gate Options: self-closing spring, lock box, latch and cane bolt

Installation Planning Fence & Gate Selection Steel Fence Styles

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Installation Planning Fence & Gate Selection Steel Fence Styles

3. Select Posts (Fence...1-1/2" or 2" sq.; Gate...3" sq.)• Select type: In-ground or surface mount• In-Ground: 1-1/2" (60"H, 66"H or 84"H) and 2" (72"H or 96"H)• Surface Mount: 37"H, 43"H or 61"H• Flatcapsstandard-ballcapsavailableonallposts

Fenced Area30’ Wide x 36’ Deep

Building

www.gilpininc.com • 800.348.0746

Steel Fence Styles

Building codesAlwayschecklocalbuildingcodesbeforestartinganinstallation.Compliancewithbuildingcodesistheinstaller’sresponsibility

Fence & Gate Selection

21-6'Wfencesections21-packagesofattachmentfittings20-fenceposts2-gateposts1 - gate

InstallationExamples

Installation Planning Fence & Gate Selection

Determining your needsAfteryouhavemeasuredinstallationarea,usethischarttorecorditemsyouwillneedforinstallation.

Item Qty.

Specifications

Steel Pickets

Picket Spacing

Post Spacing

Rails

Posts

Gate Posts

Fence

1/2" Square (Tube or Solid)

4" or 6" o.c.

74" o.c. for 6'W Panel (when using 2" posts)

1-1/4" x 1-1/4"

1-1/2" or 2" square

3" square

Steel Fence and Gate Information• Fiveuniquestyles• Steelfenceandgatearecoatedwithablack,baked-onenamel.• Mountinghardware,cuts,holes,andscrapesmustbepainted withrustresistantpaint.• Postsandaccessoriessoldseparately.• 4"o.c.spindlespacing(6"availableonMetalistandEmbassy).• Stylesavailabletomeetmanycodes.• Fencepanelsare4’or6’wideupto72”installedheight.• Matchinggatesavailable.

Metalist

Embassy

Deco

Oasis

Triton

Embassy1. Select Fence Size• Select installed height: 36"H, 42"H, 60"H or 66"H (panelheightis4"lessthaninstalledheight.)• Select panel width: 4' or 6'• Select spindle spacing: 4"or6"(spindlesare1/2"square)• Adjustsforslopes

Deco, Oasis or Triton1. Select Fence Size• Select installed height: 48"H or 72"H (panelheightis3"lessthaninstalledheight.)• Select panel width: 4' or 6'• Select spindle spacing: 4"(spindlesare1/2square)

2. Select Fitting Sets• Onesetrequiredforeachfencepanel

3. Select Posts (Fence...2" square; Gate...3” square)• Select type: In-ground or surface mount• In-Ground: 72"H or 96"H• Surface Mount: 43"H or 73"H• Flatcapsstandard-ballcapsavailableonallposts

4. Select Gate Size• Select installed height: 36"H, 48"H, 60"H or 72"H• Select width of Gate: 3'W or 4'W Please specify rough opening size• Hingesandlatchincluded• Gate Options: self-closingspring,lockbox,latchandcanebolt

Metalist1. Select Fence Size• Select installed height: 36"H, 48"H, 60"H or 72"H (panelheightis2"lessthaninstalledheight.)• Select panel width: 4' or 6'• Select spindle spacing: 4"or6"(spindlesaresolid1/2"square)• Standardpricedoesnotincludedecorativefinial

No FInial Spear Point Spanish Fleur-de-Lis

5-1/2"

2. Select Fitting Sets• Onesetrequiredforeachfencepanel

2. Select Finials• SelectfromSpearPoint,Spanish,orFleur-de-Lis

3. Select Fitting Sets• Onesetrequiredforeachfencepanel

4. Select Posts (Fence...2” square; Gate...3” square)• Select type: In-ground or surface mount• In-ground: 60"H, 72"H, 84"H or 96"H• Surface mount: 37"H, 49"H or 61"H• Flatcapsstandard-ballcapsavailableonallposts

5. Select Gate Size• Select installed height: 36"H, 48"H, 60"H or 72"H• Select width of Gate: 3'W or 4'W Please specify rough opening size• Hingesandlatchincluded• Addfinialstomatchfencestyle• Gate Options: self-closingspring,lockbox,latchandcanebolt

4. Select Gate Size• Select installed height: 36"H, 42"H or 60"H• Select width of Gate: 3'W or 4'W Please specify rough opening size• Hingesandlatchincluded• Gate Options: self-closingspring,lockbox,latchandcanebolt

Page 2: Installation Planning Fence & Gate Selection Steel Fence Styles

Gate Options See All the Gilpin ProductsFence Steel Fence

Pre-drilled and ready for assembly Easy do-it-yourself installation

Heavy-duty constructionBlack, baked-on finish

Five styles

O r n a m e n t a l S t e e l a n d A l u m i n u m

Toreviewourfulllineofsteelandaluminumproducts,pleaserequestabrochurebyphoneorthroughourwebsite.

1819 Patterson Street • 1-800-348-0746Fax 260-724-9849

www.gilpininc.com • [email protected]

©GilpinInc2010

Metalist,Embassy,Oasis,Deco,Triton,GilpinInclogoandnamearealltrademarksorregisteredtrademarksforGilpinIncornamentalsteelproducts.

Latch - includedwith steel gates

Ornamental LatchSingle Lockbox Ball Cap

Metalist

Embassy

Oasis

Deco

Triton

Limited lifetime warrantyItistheresponsibilityoftheinstallertopaintallscratches,abrasions,nicksorotherdefectsafterinstallationandtomaintainthefinishduringthelifetimeoftheproduct.Wedonotwarrantagainstrustorcorrosionoragainstdefectsinthecoating.