Instruction Manual - Hitachi · 2020. 3. 25. · Service Filter Door Water Supply Hose Top Cover Drain Hose Installation NOTE 7 Product Description The product line chart is for reference

Thank you for purchasing aHitachi front loading washing machine.

Please read this Instruction Manualcarefully for proper operation of the machine.

Instruction Manual

Washing Machine

Front Loading Content

Safety Instructions

Safety Instructions ........................ 2

Product Description ...................... 7

Installation

Installation ..................................... 8

Quick Start ..................................... 12

Operation

13

ModelBD-60CEBD-70CEBD-80CE

Before Each Washing ...................

14Detergent Dispenser .....................

15Control Panel .................................Option ............................................. 16Other Function ............................... 17Programs ........................................ 18Washing Program Table ................ 19

Cleaning And Care ........................ 21

Maintenances

24Troubleshooting ...........................

25Technical Specifications ...............

26Specification ..................................

Please keep this Instruction Manual forfuture reference.

2

Safety InstructionsSafety Instructions

For your safety, the information in this manual must be followedto minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life.Explanation of the symbols:

WARNING！This combination of symbol and signal word indicatesa potentially dangerous situation which may result in death or serious injuries unless it’s avoided.

This combination of symbol and signal word indicatesa potentially dangerous situation which may result inslight or minor injuries or damage to property and theenvironment.

This combination of symbol and signal word indicatesa potentially dangerous situation which may result inslight or minor injuries.

NOTE

WARNING！

The electric shock!

● If the supply cord is damaged, it must be replaced by themanufacturer, its service agent or similarly qualifiedpersons in order to avoid a hazard.

CAUTION！

3

Risk to children!

Safety Instructions

● The new hose-sets supplied with the appliance are to beused and that old hose-sets should not be reused.

● Before any maintenance the device, unplug theappliance from the mains.

● Always unplug the machine and turn off the watersupply after use.

● To ensure your safety, power plug must be inserted intoan earthed three-pole socket. Check carefully and makesure that your socket is properly and reliably earthed.

● Make sure that the water and electrical devices mustbe connected by a qualified technician in accordancewith the manufacturer's instructions and local safety regulations.

● Children should be supervised to ensure that they do not play with appliance.

● Animals and children may climb into the machine. Checkthe machine before every operation.

● Kids should be supervised that they do not play withthe appliance.

● Do not pour water on the machine when it is running.This could cause an electric shock.

● Do not insert the plug with a wet hand.● Use the rated mains voltage and do not connect another plug at the same socket.● Do not use a mains plug adaptor or an extension cable.

● Do not dismantle, repair or modify the appliance. This could cause malfunction, fire, electric shock or injury.

For repair, please contact your local service center.

4

Risk of explosion!

Installing the product!

Safety Instructions● Glass door may be very hot during the operation. Keep

kids and pets far away from the machine during theoperation.

● Remove all packages and transport bolts before usingthe appliance. Otherwise, serious damage may result.

● Plug must be accessible after installation.

● Do not wash or dry articles that have been cleaned in, washedin, soaked in, or dabbed with combustible or explosivesubstances (such as wax, oil, paint, gasoline, degreasers,dry-cleaning solvents, kerosene, etc.) This may result infire or explosion.

● Beforehand thoroughly rinse items of washing by hand.

● This washing machine is for indoor use only.● It isn't intended to be built-in using.● The openings must not be obstructed by a carpet.● Washing machine shall not be installed in bath room or

very wet rooms as well as in the rooms with explosiveor caustic gases.

● The washing machine with single inlet valve only can beconnected to the cold water supply. The product withdouble inlet valves should be correctly connected to thehot water and cold water supply.

● Plug must be accessible after installation.

CAUTION！

● The installation of the appliance should be done by themanufacturer’s dealer or service agent.

● If there is a water outage or you remove the water supply hoseand reattach it, turn off the tap and press the Start/Pause button,then turn on the tap slowly after 40 seconds.Air pressure could damage the washing machine if there is a lotof air in the water pipe.

5

Risk of damaging appliance!

Operating the appliance!

Safety Instructions

● Remove all packages and transport bolts before usingthe appliance. Otherwise, serious damage may result.

● Your product is only for home use and is only designedfor the textiles suitable for machine washing.

● Do not climb up and sit on top cover of the machine.● Do not lean against machine door.● Do not put heavy objects on the washing machine.

1. Transport bolts shall be reinstalled to the machine by a specialized person.

2. The accumulated water shall be drained out of the machine.

3. Handle the machine carefully. Never hold each protruded part on the machine while lifting. Machine door can not be used as the handle during the conveyance.

4. This appliance is heavy. Transport with care.

● Please do not close the door with excessive forces. If itis found difficult to close the door, please check if theclothes are put in or distributed well.

● It is forbidden to wash carpets.

● Before washing the clothes at first time, the productshall be operated in one round of the whole procedureswithout the clothes inside.

● Flammable and explosive or toxic solvents are forbidden.Gasoline and alcohol etc. shall not be used as detergents.Please only select the detergents suitable for machinewashing, especially for drum.

● Cautions during Handling Machine:

Packaging/Old appliance

6

Safety Instructions

● Make sure that all pockets are emptied. Sharp and rigiditems such as coin, brooch, nail, screw or stone etc. maycause serious damages to this machine.

● Please check whether the water inside the drum hasbeen drained before opening its door. Please do not openthe door if there is any water visible.

● Be careful of burning when the product drains hotwashing water.

● Never refill the water by hand during washing.● After the program is completed, please wait for two

minutes to open the door.

This marking indicates that this product should not bedisposed with other household wastes throughout theEU. To prevent possible harm to the environment orhuman health from uncontrolled waste disposal, recycleit responsibly to promote the sustainable reuse ofmaterial resources. To return your used device, please usethe collection systems or contact the retailer where theproduct was purchased. They return and can take thisproduct for environmental safe recycling.

● Do not wash waterproof items such as raincoats, wet suits,ski suits, sleeping bags, cushions, pillows, shoes, etc.The washing machine may not work properly, or the itemsmay cause injury or damage the machine.

● If detergent, fabric softener or bleach spills on the surface ofthe machine, clean it up with a damp cloth immediately.The plastic or steel parts of the washing machine may getdamaged.

● Do not place heat sources near the washing machine.This may cause deformation of the machine.

Drum

Power Supply Cord

Control Panel

Detergent Dispenser

Service FilterDoor

Water Supply Hose

Top Cover

Drain Hose

Installation

NOTE

7

Product Description

The product line chart is for reference only, please refer to real product as standard.

Accessories

TransportBolts

Supply Hose (hot water)

Supply Hose(cold water)

Drain Hose Support

※Optional

Instruction Manual

※Optional(4pcs.)

Installation area

WARNING！

Unpacking the washing machine

WARNING！

Remove transport boltsWARNING！

8

Installation

Stability is important to prevent the product from

● wandering!

Make sure that the product should not stand on the power cord.

●

ww

W 20mm>

Before installing the machine, the location characterized follows shall be selected:

1. Rigid, dry, and level surface 2. Avoid direct sunlight3. Sufficient ventilation4. Room temperature is above 0°C5. Keep far away from the heat resources such as coal or gas.

●

● Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging

well away from children.

1. Remove the cardboard box and styrofoam packing.2. Lift the washing machine and remove the base packing. foam is removed with the bottom one together. If not, lay the unit down with side surface, then remove the small foam from the unit bottom manually.

Make sure the small triangle

3. Remove the tape securing the power supply cord and drain hose.4. Remove the inlet hose from the drum.

●● You must remove the transport bolts from the backside before using the product.

You’ll need the transport bolts again if you move the product, so make sure keep them in a safe place.

Please take the following steps to remove the bolts:1. Loosen 4 bolts with spanner and then remove them.2. Stop the holes with transport bolts.

3. Keep the transport bolts properly for future use.

Leveling the washing machine

WARNING！

1 2 3 4

Connect Water Supply Hose

WARNING！

1 2 3 41

2

9

Installation

● The lock nuts on all four feet must be screwed tightly against the housing.

1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts.

2. Loosen the lock nut turn the feet until it closely contacts with the floor. 3. Adjust the legs and lock them with a spanner, make sure the machine is steady.

Raise Lower

Lock nut

foot

● To prevent leakage or water damage, follow the instructions in this chapter. Do not kink, crush, modify or sever water inlet hose.●

For the model equips hot valve, connect it to hot water tap with hot water supply ● hose. Energy consumption will decrease automatically for some program.

Connect the inlet pipe as indicated. There are two ways to connect the inlet pipe.

Connection between ordinary tap and inlet hose.

clamp nutLoosen clamp nut and four bolts

Tighten clamp nutPress slide bushing, insert inlet hose into connecting base

Slide Bushing

Connection finished

Connection between screw tap and inlet hose.

Tap with threads and inlet hose

Slide Bushing

Special tap for washing machine

● Check the alignment of the washing machine with level, and adjust the feet if it’s aligned.

Drain Hose

WARNING！

WARNING！

10

Installation

Water Supply HoseWater Inlet Valve

● Do not kink or protract the drain hose. Position drain hose properly, otherwise damage might result of water leakage. ●

There are two ways to place the end of drain hose:

Water trough

Min

.60c

m

Max

.100

cm

1.Put it into the water trough. 2.Connect it to the branch drain pipe of the trough.

NOTEIf the machine has drain hose support, please install it like the following. ●

Trough

Hose Retainer

Bind

Max.100cmMin.60cm

Min

.60c

mM

ax.1

00cm

● ●

When installing drain hose, fix it properly with a rope. If drain hose is too long, do not force it into washing machine as it will cause

abnormal noises.

Hose Connector

Rubber Seal

● Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten the pipe tightly clockwise.● Optimum water pressure is 0.05~1.0MPa.

11

InstallationChecking operation

1

Checking after installation

Turn on the water tap and close the washing machine door.

2 Press the Power button to switch power on.

3 Select the cotton program and press the Start/Pause button.

4 After 5 minutes, check if there is no water leakage from anywhere.

5 Press the Power button to switch power off.

6 Press the Power button again to switch power on.

7 Select the Spin program and press the Start/Pause button.

8 Check if there is no abnormal vibration or sound, and that water is drained out properly.

If any of the following conditions or other abnormalities occur, immediately pull outthe power plug to prevent an accident and contact your local service center.

● The washing machine does not operate when you switch power on.

● The power cord has cracks.

● There are abnormal vibrations and sounds during operation.

● There is a smell of burning.

12

OperationsQuick Start

Before washing, please make sure it’s installed properly.● Before washing at first time, the washing machine shall be operated in one ● of the whole procedures without clothes in as follows.

1

2

Before Washing

1 2 3 4 5

Plug in Open tap Load Close door

Main wash

Prewash

Softener

Add detergent

● Detergent need to be added in “case I” after selecting pre-washing for machines

NOTE

with this function.

Washing

1 2 3

Select Programs Select function or default Start up

● If default is selected, step 2 can be skipped.

3 After Washing“End” on display.

CAUTION！

NOTE

OperationsBefore Each Washing

13

● The working condition of the washer should be 0-40°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is placed under

condition of 0°C or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen

before use. ● Please check the labels and the explanation of using detergent before wash. Use

non-foaming or less-foaming detergent suitable for machine washing properly.

Check the label Take out the items out of the pockets

Knot the long strips, zip or button

Put small clothes into the pillow slip

Turn easy-pilling and long-pile fabric inside out

Separate clothes with different textures

WARNING！● When washing a single clothes, it may easily cause great eccentricity and give

alarm due to great unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that spinning can be done smoothly.

● Don’t washing the clothes touching with kerosene, gasoline, alcohol and other flammable materials.

● Washing the following items may cause injury or malfunction due toabnormal vibration.

- Waterproof items such as a wet suit, ski suit, etc.- Anti-slip treated items with rubber bottoms such a doormat.- Cushions, pillows, shoes, etc.- Do not put the fabric which can absorb the water very well (towel, jeans, etc.)

in the laundry net when washing.

OperationsDetergent Dispenser

-

-

14

Pre wash detergentMain wash detergentSoftener

III

Dam-board

Dam-board

Liquid detergent

Powder detergent

● Detergent only need to be added in “case I” after selecting pre-washing for machines with this function.

ProgramsCotton EcoCotton

Rinse&SpinSpin Duvet

Means must ○　Means optional

Programs

WoolDelicateMix

Synthetic

NOTE● As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and overflowing while filling water.

Please choose suitable type of detergent for the various washing temperature to get the best washing performance with less water and energy consumption.

●

Rapid 15Daily 45Daily 60

Tub Clean

OutdoorBaby Care

CAUTION！

● Use the amount of detergent recommended on the detergent package. The type and amount of detergent depends on the type of fabric, load size, degree of soiling and hardness of the water used. Use less detergent if : You wash a small load and the laundry is slightly soiled.● Too much detergent can result in excess foam formation which reduces rinse efficiency or may cause a water leak.

OperationsControl Panel

4

1

3 2

5

A C

B

E D

A

B

D

CE

15

Model: BD-60CE /BD-70CE /BD-80CE

ProgramsAvailable according to the laundry type.

PowerProduct is on/off.

Start Pause/Press the button

washing cycle.to start or pause the

Option This allows you to select an additionalfunction and will light when selected.

DisplayThe display shows the settings, estimated time remaining, options, and status messages

for your washer. The display will remain on through the cycle.

NOTEThe chart is for reference only, please refer to real product as standard.●

Child Lock

Reload

Display

End Temp. (°C)

Door Clean

Door Lock

Wash Time (h:min) Delay Time

Speed (r/m)

*For spin speed above 1,000 (r/m), display shows first two digits.

Error

Display

OperationsOption

16

Prewash

Pre Wash: The Prewash function can get an extra wash before main wash, it is suitable for washing the

Extra Rinse

dust rises to surface of the clothes; You need to put detergent into the Case (I) when select it.

Extra Rinse: The laundry will undergo extra rinse once after you select it.

Timer Timer: Set the Timer function

Press the Function button to choose

Press the Function button to choose

1. Select a programme 2. Press the Timer button to choose the time (the delaying time is 0-24 H.); 3. Press[Start/Pause to commence the delay operation]

Timer

Cancel the Timer function

Press the [Timer] button and [Start/Pause] button until the display be 0h. It should bepressed before starting the programme. If the programme already started, should switchoff programme to reset a new one.

Stain Level

Stain Level The washing time will increase or decrease after you select it.

● If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and when the power is restarted, the program will continue.

Option Programme OptionExtrarinse

Means optional (Some models have intelligent weighing function, please refer to the actual product)○　

Cotton EcoCottonRapid 15Daily 45Daily 60 Rinse&SpinSpin Duvet

Tub CleanWoolDelicateMixOutdoorBaby CareSynthetic

Prewash

Prewash

ExtrarinseTimer Timer

Programme

CAUTION！

Timer SpinSpeed

OperationsOther Function

Temp:

Spin Speed:

Press the Temp button to choose

Press the Spin Speed button to choose

Temp

SpinSpeed

Child Lock:

Mute the buzzer :

Memory:

17

Memory

Door Clean: The shower inlet to door glass before final spin process and before opration.

Reload:

Press the button to regulate the temperature (Cold, 20°C, 30°C, 40°C, 60°C, 90°C)

Press the button to change the speed.1200: 0-400-600-800-1000-1200

Daily 45

Programme

Cotton EcoCotton

Rinse&SpinSpin Duvet

Default Speed(r/m) Programme

WoolDelicateMix

Synthetic

Default Speed(r/m)

800

1000

800

1200

1000

1200

800

1000

1200

800

1000

400600

12001000

400

800

Tub Clean

OutdoorBaby Care

Rapid 15

Daily 60

Means optional (Some models have intelligent weighing function, please refer to the actual product)*For spin speed above 1,000 (r/m), display shows first two digits.○　

To avoid misoperation by children.

● Press the two button 3 sec. also to be released the function.● The “Child Lock” will lock all buttons except Power button.● Cut off the power supply, the kid’s protection is to be released.● The child lock will remain effective when the power is resumed for some models.

Temp.Choose Press the Temp. button for 3sec.,[ ]the buzzer is mute.

To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset.

the Programme

Choose the Programme Start

Press [ ] [ ]Delay and Speed

● After muting the buzzer function, the sounds will not be activated any more.

To memory the frequently used programs.After choosing the program and setting the options, press [Spin Speed] 3 sec. before start to wash. The default setting course is Cotton Eco.

CAUTION！

CAUTION！

Door Clean

Reload

You can add fabric when your press [Start/Pause] button for 3sec.Before the water high level and the temperature up to 60°C.

Cotton

OperationsPrograms

Synthetic

Baby Care

Daily 45

Mix

MemoryRapid 15

Daily 45

Daily 60

Outdoor

Baby Care

Rinse & Spin

Cotton Eco

Cotton

Mix

Wool

Delicate

DuvetTub Clean

Spin

Synthetic

Daily 60

Outdoor

Rapid 15

Wool

Spin

Cotton Eco

Tub Clean

Duvet

Delicate

18

Programs are available according to the laundry type.

Hard-wearing textiles, heat-resistant textiles made of cotton or linen.

Wash synthetic articles, for example: shirts, coats, blending. While washing the knitting textiles, detergent quantity shall be reduced due to its loose string construction and easily forming bubbles.

Washing the baby’s clothes, it can make the baby’s wear cleaner and make the rinse performance better to protect the baby skin.

Washing few and not very dirty clothes quickly.

Mixed load consisting of textiles made of cotton and synthetics.

It is suitable for washing few and not very dirty clothes quickly.

Specially for outdoor clothes.

Extra short program approx suitable for lightly soiled washing as a small amounts

,

Hand or machine - washable wool or rich wool textiles. Especially gentle wash program to prevent shrinkage, longer program pauses (textiles rest in wash liquor).

Extra spin with selectable spin speed.

To increase the washing effects, washing time is increased.

Specially set in this machine to clean the drum and tube. It applys 90°C high temperature sterilization to make the clothes washing more green. When this programme is performed, the clothes or other washing cannot be added.When proper amount of chlorine bleaching agent is put in, the barrel cleaning effect will be better. The customer can use this programme regularly according to the need.

This program is specially designed for washing duvet coats.

For delicate washable, e.g. made of silk, satin, synthetic fibres or blended fabrics.

of laundry.

OperationsWashing Programs Table

NOTE

19

Programs Load(kg) Default Time

Default

30

Cold

Synthetic 40

30

Cold

40Cotton

Spin

Wool

Rinse & Spin

40

30Delicate

Mix 40

Temp.(°C)

Cotton Eco 30

6.0 7.0 8.08.0

2.0

4.0

2.0

8.0

8.0

2.0

2.5

8.0

8.0

7.0

2.0

3.5

2.0

7.0

7.0

2.0

2.5

7.0

7.0

6.0

2.0

3.0

2.0

6.0

6.0

2.0

2.5

6.0

6.0

2.02.02.0

8.07.06.0

8.07.06.0

-

8.07.06.0

90

40

0:45

1:40

1:20

1:00

0:12

1:21

1:06

0:31

1:48

1:00

1:13

0:58

2:40

0:15

- -

-

-

Model: BD-60CE /BD-70CE /BD-80CE

Rapid 15

Daily 45

Daily 60

Outdoor

Baby Care

Tub Clean

402.52.5Duvet 1:202.5

Energy test program: Cotton Eco 60/40 . Speed: the highest speed; Other as the default.

● The EU energy efficiency class is: A+++ °C

Half load for 6.0/7.0/8.0Kg machine: 3.0/3.5/4.0Kg.

● “Cotton Eco 60/40°C” is the standard washing programs to which the information in the label and the fiche relates, and they are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in terms of combined energy and water consumptions for washing that type of cotton laundry, that the actual water temperature may differ from the declared cycle temperature.

● The parameters in this table are only for user's reference. The actual parameters maybe different with the parameters in above mentioned table.

OperationsDuvet program

NOTE● Do not use blanket net. This may cause excessive vibration when spinning.

1 Load the laundry

1 2 3

20

1

2

3

Fold a large items such as a duvet or blanket as follows.

Load laundry into the drum with the ends facing the rear of the drum.

Drum

Laundry ends facingrear of drum

Push laundry insidenot to exceed this line

Press the Power button to switch power on.

45

Select the Duvet program.

Add detergent into the detergent dispenser.

Press the Start /Pause button.

MaintenancesCleaning And Care

21

● Before your maintenance starts, please unplug the machine and close the tap.

1

2

3

Cleaning The CabinetProper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed.

NOTEFormic acid and its diluted solvents or equivalent are forbidden, such as ● alcohol, solvents or chemical products, etc.

Cleaning The DrumThe rusts left inside the drum by the metal articles shall be removed immediately with chlorine-free detergents.Never use steel wool.

Formic acid and its diluted solvents or equivalent are forbidden, such as ● alcohol, solvents or chemical products, etc.

Cleaning The Door Seal And GlassWipe the glass and seal after each wash to remove lint and stains. If lint builds up, it can cause leaks. Remove any coins, buttons and other objectsfrom the seal after each wash.

WARNING！

NOTE

Do not apply too much force during door below cleaning because it may cause of door bellow take out and the water leakage problem.

● CAUTION！


4 Cleaning The Inlet FilterNOTE

5 Cleaning The Detergent Dispenser

1 2 3 4

22

NOTE

NOTE

● Inlet filter must be cleaned if there is less water.

Washing the filter in the tap1.Close the tap.2.Remove the water supply hose from the tap.3.Clean the filter.4.Reconnect the water supply hose.

Washing the filter in washing machine:

1.Screw off the inlet pipe from the backside of the machine.2.Pull out the filter with long nose pliers and reinstall it back after being washed.3.Use the brush to clean the filter.4.Reconnect the inlet pipe.

● If the brush is not clean, you can pull out the filter washed separately;● Reconnect, turn on the tap.

1.Press down the arrow location on softener cover inside the dispenser drawer.2.Lift the clip up and take out softener cover and wash all grooves with water.3.Restore the softener cover and push the drawer into position.

Do not use alcohol, solvents or chemical products to clean the machine.●

Pull out the dispenser drawer with press the A

Clean the dispenser drawer under water

Clean inside the recess with an old toothbrush

Insert the dispenser drawer

Filter

Softenercover

A


6 Cleaning The Drain Filter

1

3 4 5

23

2

Be careful of the hot water!● Allow detergent solution to cool down.●

● Unplug the machine to avoid electrical shock before washing.● Drain pump filter can filter the yarns and small foreign matters from the washing.● Clean the filter periodically to ensure the normal operation of washing machine.

Open the filter by turning to the counter clockwise

Remove extraneous matter Close the lower cover cap

● Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted aligning to hole plates otherwise water may leak.

● Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped. Rotate lower cover cap directly to make water run into basin.

● When the appliance is in use and depending on the programme selected there can be hot water in the pump Never remove the pump cover during a wash cycle always . , , . wait until the appliance has finished the cycle and is empty When replacing the cover ensure it is securely re-tightened, .

Open the lower cover cap

Select the Spin program and start to drain remaining water in the drum.Make sure to drain the water first with Drainprogram, otherwise a lot of hot water may come out.

●

●

● Do not open the drain filter when a program is running.● Do not operate the washing machine without the drain filter.

WARNING！

CAUTION！

MaintenancesTroubleshooting

Error Codes

NOTE●

24

The start of the appliance does not work or it stops during operation.First try to find a solution to the problem, if not, contact the service centre.

Description Reason SolutionRestart after the door is closedCheck if the clothes is stuck

Door is not closed properly

Door can’t be opened

Washer's safety protection design is working

Disconnect the power, restart the product

Water leakage The connection between inlet pipe or outlet hose is not tightCheck and fasten water pipesClean up outlet hose

Clean and wipe the detergent box

Abnormal noise Check if the fixing (bolts) have been removed

and level floorCheck it’s installed on a solid

Indicator or display does not light

Disconnect the power PC board or harness has connection problem

Check if the power is shut down and the power plug is connected correctly

Washing machine cannot start up

Detergent residues in the box

Detergent is dampened or agglomerated

Description Reason Solution

Check if the water pressure is too lowStraighten the water pipeCheck if the inlet valve filter is blockedCheck if the drain hose is blocked

Water injecting problem while washing

Overtime water draining

Please try again first, call up service line if there are still troubles

Others

Water overflowThis is caused by a faulty device sensor.

Restart the washer

Restart after the door is closedCheck if the clothes is stuck

Door is not closed properly

After the check activate the appliance If the problem occurs or the display , . shows other alarm codes again, contact the service centre.

25

MaintenancesTechnical Specifications

MAX.Current

Standard Water Pressure

10A

0.05MPa~1MPa

Power Supply 220-240V, 50Hz

595*470*850BD-60CE

Dimension(W*D*Hmm)

6.0kg

7.0kg

Rated PowerNet WeightWashing CapacityModel

595*495*850

54kg 2100W

61kg 2000W

H

W D

BD-70CE

8.0kg 595*565*850 2000W68kgBD-80CE

26

MaintenancesSpecifications

BD-60CE

6kg

1200 rpm

A +++

153 kWh /annual

0.5W

1.0W

9240L /annual

B

Cotton Eco

0.80/0.8/0.77 kwh /cycle

0.59/0.59/0.62 kwh /cycle

0.57/0.57/0.58 kwh /cycle

230/230/240min

223/223/230min

220min

48L /cycle

37L /cycle

37L /cycle

50%

55%

55%

59dB (A)

76dB (A)

Model

Capacity

Spin Speed

Energy efficiency class

Annual energy consumption

Power consumption of off - mode

Power consumption of Left on -mode

Annual water consumption

Spin- drying efficiency class

Standard washing cycle

Energy consumption of the standard 60°C at full load

Energy consumption of the standard 60°C at partial load


Programme duration of standard 60°C at full load

Programme duration of standard 60°C at partial load


Water consumption of the standard 60°C at full load

Water consumption of the standard 60°C at partial load


Remaining moisture content of the standard 60°C at full load

Remaining moisture content of the standard 60°C at partial load


Noise level of washing

Noise level of spinning

27

BD-70CEModel


7kg

1200rpm

A +++

174 kWh /annual

0.5W

1.0W

10000/10000/10000/10000/9900L /annual

B

Cotton Eco

0.90/0.90/0.90/0.90/0.91 kwh /cycle

0.72/0.72/0.72/0.72/0.71 kwh /cycle

0.62 kwh /cycle

235/235/235/235/230min

225/225/225/225/215min

223/223/223/223/210min

50L /cycle

42/42/42/42/41L /cycle

42/42/42/42/41L /cycle

50%

55%

55%

59dB (A)

78dB (A)

Capacity

Spin Speed






















28


BD-80CE

Model

8kg

1200 rpm

A +++

196 kWh /annual

0.5W

1.0W

11000L /annual

B

Cotton Eco

0.93/0.93/0.93/0.93/0.90 kwh /cycle

0.84/0.84/0.84/0.84/0.88 kwh /cycle

0.81 kwh /cycle

239/239/239/239/230 min

228/228/228/228/220 min

225/225/225/225/210 min

54L /cycle

45/45/45/45/47L /cycle

45/45/45/45/47L /cycle

50%

55%

55%

59dB (A)

78dB (A)

Capacity

Spin Speed






















Memo

29

PART NO.

BD-60CE-Page-1BD-60CE-Page-2BD-60CE-Page-3BD-60CE-Page-4BD-60CE-Page-5BD-60CE-Page-6BD-60CE-Page-7BD-60CE-Page-8BD-60CE-Page-9BD-60CE-Page-10BD-60CE-Page-11BD-60CE-Page-12BD-60CE-Page-13BD-60CE-Page-14BD-60CE-Page-15BD-60CE-Page-16BD-60CE-Page-17BD-60CE-Page-18BD-60CE-Page-19BD-60CE-Page-20BD-60CE-Page-21BD-60CE-Page-22BD-60CE-Page-23BD-60CE-Page-24BD-60CE-Page-25BD-60CE-Page-26BD-60CE-Page-27BD-60CE-Page-28BD-60CE-Page-29BD-60CE-Page-30

Documents

Instruction Manual - Hitachi · 2020. 3. 25. · Service Filter Door Water Supply Hose Top Cover Drain Hose Installation NOTE 7 Product Description The product line chart is for reference