Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
INSTRUCTION SHEET FOR MARVEL-SCHEBLER CARBURETOR MODEL TSX
--=-=----- \ 0 \
l25A \ -,24A \I \
-4A \
Al1A \ __ _ � 29/
.
• '-15
B..,....12
DISASSEMBLY: Use exploded view as a guide. The numerical sequence may generally be followed to disa�semble unit far enough to permit cleaning and inspection. Note: idle jet (14) and economizer jet (15) are not used in all carburetors. When removing idle jet (14), economizer jet (15), or power jet (26) be sure to use the proper size screwdriver. Jets can easily be broken. Before removing throttle valve (17), note angle identification mark facing flange face of carburetor. Power adjusting needle
seat (27} not used in all type B carburetors.
1.
1A.
2.
3.
4. -- ---
4A.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Needle (Type B) [Power adjusting]
Needle Assy. (Type C) [Power adjusting]
Spring [Power adj. needle]
Washer [Flat power adj. needle spring]
Gasket - -��- ----
[Power adj. needle]
Gasket (Type C)
[Power adj. ndl. assy.)
Needle [Idle adjusting]
Spring [Idle adj. needle]
Screw & lockwasher (4) [Bowl cover]
Bowl cover
Pin-float lever
Float & lever assy.
Gasket bowl cover
Venturi
Needle, seat & gasket assy.
Jet idle
Jet-economizer
16. Screw & lockwasher(2) [fhrottle valve]
17. Throttle valve
18. Shaft & lever assy.[fhrottle screw-throttle stop)
19 Screw [fhrottle stop]
2-_0._ fu)ring ____ [Throttle stop screw]
21. Retainer[fhrottle shaft seal]
22. Seal (felt)[fhrottle shaft]
22A. Seal (rubber) [fhrottle shaft]
23. Cup-throttle shaft
24. Nozzle (Type A-B)[Main]
24A. Nozzle main (Type C)
25. Gasket-main nozzle(Type A-B)
25A. Gasket-main nozzle (Type C)
26. Jet-power (Type A-B)
27. Seat-power adjustingneedle (Type B)
28. Screw-plug
29. Plug-bowl drain
30. Bowl assy. - float