Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
En
glis
h
EINSTRUCTIONS
3
Thank you for purchasing a Canon product.The EOS ELAN 7NE (DATE) / ELAN 7N / 30V (DATE) / 33V is a high-performance, AF single-lens reflex camera with Eye Control∗ and sevenAF points. It is suited for a wide variety of subjects and situations withfully automatic and user-controlled shooting modes.Read this instruction booklet to familiarize yourself with your new camerabefore taking pictures.Also read “Handling Cautions” on page 6 to prevent camera malfunctionand damage.Keep this instruction booklet handy for easy reference.
Before Using Your Camera
• Before an important shoot, be sure to take test shots to make surethe camera operates properly.
• EOS cameras have a lens mount for dedicated operation(autofocusing, exposure control, etc.) with Canon EF lenses. Usinga non-Canon lens with an EOS camera may not result in propercamera or lens operation.Note that the warranty does not cover any camera malfunction ordamage occurring with the use of non-Canon products.
Symbols
The Caution symbol alerts you to avoid shooting problems.
The Note symbol gives supplemental information for basiccamera operation or picture-taking tips.
The Custom Function symbol indicates that there is a relevantCustom Function. For details, see “Custom Function Settings”on page 85.
∗m Model (EOS ELAN 7NE, 30V) only
4
Contents
Introduction
Handling Cautions .............................6
Quick Start Guide ..............................8
Nomenclature ..................................10
Conventions Used in this Instructions ...16
1 Before You Start.........................17
Installing the Batteries .....................18
Checking the Battery Level ..............19
Mounting and Detaching a Lens......20
Mounting a Lens..........................20
Detaching the Lens .....................20
How the Shutter Button Works.........21
5Loading and Unloading Film........22
Loading Film................................22
Checking the Film Speed ............23
Unloading Film ............................24
6Midroll Rewind .....................24
Dioptric Adjustment .........................25
Holding the Camera.........................26
2 Fully Automatic Shooting.........27
YFull Auto Mode ...........................28
AF-Assist beam with the Built-in Flash...29
Programmed Image Control Modes...30
U Portrait ...................................30
ILandscape.............................30
O Close-up ................................30
P Sports ....................................31
A Night Portrait..........................31
FUsing Red-eye Reduction ..........32
qUsing the Self-timer .....................33
Using the Eyepiece Cover ...............34
Imprinting the Date or Time .............35
Setting the Date and Time...........36
Replacing the Date Battery .........36
3 AF Modes and Metering Modes ...37
Selecting the AF Mode ....................38
One-Shot AF for Still Subjects.....39
AI Servo AF for Moving Subjects ...39
AI Focus AF for Automatic AF
Mode Switching ...........................40
3Selecting an AF Point .................41
Basic Procedure for AF Point
Selection......................................41
Automatic Selection.....................42
Manual Selection.........................42
e Eye Control Calibration...........43
Calibration Procedure..................43
Eye Control Calibration and
Operation Tips .............................46
Intelligent Eye Control .................46
Deleting Eye Control Calibration
Settings .......................................47
gUsing Eye Control .....................48
Eye Control Servo AF..................49
Turning Off Eye Control ...............49
5
Focusing Off-Center Subjects..........50
When Autofocus Fails
(Manual Focusing) ..........................51
8Manual Focusing ...................51
ZMetering Modes..........................52
4 User-Controlled Shooting.........53
S Program AE.................................54
R Shutter-Priority AE....................56
E Aperture-Priority AE .................58
Depth-of-field Preview .....................59
W Manual Exposure .......................60
Q Depth-of-field AE ....................62
Depth-of-field AE with a
Manually-Selected AF Point ........62
Depth-of-field AE with Eye Control ...64
Exposure Compensation .................67
LAuto Exposure Bracketing (AEB) ...68
Canceling AEB ............................69
jAE Lock.......................................70
Bulb Exposures................................71
4Multiple Exposures ....................72
HSelecting the Film Advance Mode ...73
D Setting the ISO Film Speed.....73
9Silencing the Beeper...................74
bLCD Panel Illumination................74
Mirror Lockup...................................75
KWireless Remote Control...............76
Using the Remote Switch ................76
5 Flash Photography....................77
Using the Built-in Flash....................78
In a Basic Zone Mode .................78
In a Creative Zone Mode.............78
aFlash Exposure Compensation ...80
Using an EOS-dedicated Speedlite...81
Using an EX-series Speedlite .....81
Using an EZ/E/EG/ML/TL-series
Speedlite .....................................81
6 Custom Functions (C.Fn) .........83
GSetting a Custom Function........84
Custom Function Settings................85
Reference ...................................89
Basic Photography Terms ................89
Feature Availability Table .................91
AE Lock Effects ...............................92
AF Mode and Film Advance
Mode Combination...........................92
Program Line ...................................93
Troubleshooting Guide.....................94
Major Specifications.........................95
Index ................................................98
6
Handling CautionsCamera Care and Storage• The camera is a precision instrument. Do not drop it or subject it to
physical shock.• The camera is not waterproof and should not be used in wet conditions
or underwater. If the camera gets wet, take it to your nearest Canondealer as soon as possible. If small amounts of water splash onto thecamera, wipe it with a clean dry cloth. If the camera is exposed to saltyair, wipe it thoroughly with a slightly damp cloth.
• Do not leave the camera in places prone to excessive heat such as in acar on a sunny day. Excessive heat can cause the camera tomalfunction.
• The camera contains precision electronic circuitry. Never attempt todisassemble the camera.
• Use only a blower brush to blow away any dust on the lens, eyepiece,mirror, focusing screen, film compartment, etc. Do not clean thecamera body or lens with any cleaner containing an organic solvent.For stubborn dirt, consult your nearest Canon dealer.
• The shutter curtains are extremely thin. Use only a blower to cleanthem. Be careful not to blow air too forcefully on the shutter curtains.The shutter curtains can be easily deformed or damaged. Also, whenloading and unloading film, be careful not to touch the shutter curtains.
• Do not touch the electrical contacts with your fingers. Otherwisecorrosion may develop on the contacts, resulting in improper cameraoperation.
• If the camera is not to be used for an extended period, remove thebatteries. Store the camera in a well-ventilated, cool, dry place. Duringstorage, press the shutter button once in a while to release the shuttera few times.
• Avoid storing the camera in a laboratory, cabinet, etc., where corrosivechemicals are present.
• If you have not used the camera for some time or if there is animportant shoot, have the camera checked by your Canon dealerbeforehand, or check for yourself that the camera components areworking properly.
LCD DisplaysLCD displays operate more slowly at low temperatures, and may appeardark at high temperatures. The display will return to normal at roomtemperature.
Batteries• Before installing the batteries, wipe the battery contacts to remove any
fingerprints and smudges. This is to prevent faulty connections andcorrosion.
• Never disassemble or recharge the batteries. Also, never store abattery in high-temperature places or short circuit the battery contactsor toss a battery into a fire.
• Although the batteries work well even at low temperatures, batteryperformance may decline slightly at freezing temperatures. In such acase, keep spare batteries warm in a pocket, etc., and use and warmthe batteries alternately.
How Low Battery Levels Affect Camera OperationOn the LCD panel, if the <r> icon blinks or it is not displayed, a properexposure can still be obtained as long as the shutter releases. However,when the battery level is low, the film advance and auto rewind mightstop midway or not work at all and the <r> icon may blink on the LCDpanel. After the batteries are replaced with new ones, film advance willbe possible and film rewind can resume by pressing the <6> button.
Lens Electrical ContactsAfter detaching the lens from the camera, put onthe lens caps or put down the lens with the rearend up to avoid scratching the lens surface andelectrical contacts.
7
Contacts
8
Quick Start Guide
1 Install the batteries.Refer to the batteryorientation diagram on thebattery chamber cover, andinsert two CR123A lithiumbatteries as shown. (p.18)
2Attach a lens.Align the red dots on thelens and camera and turnthe lens as shown by thearrow until it snaps in place.(p.20)
5 Load the film.Align the edge of the filmleader with the orange markon the camera and closethe camera back until itsnaps shut. (p.22)• The film will advance to
the first frame.
6Focus the subject.Aim the AF points on themain subject and press theshutter button halfway toautofocus. (p.21)• Under low-light or backlit
conditions, the built-inflash will pop-up and fireautomatically. (p.78)
+
–
9
3 On the lens, set thefocus mode switch to<AF>. (p.20)
4Turn the Mode Dial to<Y> (Full Auto).Keep pressing the ModeDial’s lock button whileturning the dial. (p.28)
7 Take the picture.Press the shutter buttoncompletely to take thepicture. (p.21)
8Unload the film.At the end of the roll, thefilm rewinds automatically.Open the camera back toremove the film cartridge.(p.24)
10
Nomenclature• Reference page numbers are in parentheses.• The camera controls are indicated as icons in brackets < >.
Built-in flash / AF-assist beam (p.78/29)
Red-eye reduction lamp / Self-timer/Remote control lamp(p.32/33/76)
AF mode dial (p.15, 38)
Remote control sensor (p.76)
Hot shoe (p.81)
**Eye Control switch (p.15, 43, 48)
Shutter button (p.21)
Grip / Batterycompartment(p.18)
Flash-sync contact
Dioptric adjustment knob (p.25)
Strap mount (p.17)
Lens release button (p.20)
Body cap (p.20)
<l> Main Dial (p.16) Mode Dial (p.14)
LCD panel (p.12)
LCD panel illumination button (p.74)
Depth-of-field preview button (p.59)
Film advance mode lever (p.15, 33, 73)
Mode Dial lock release button (p.14)
Lens lock pin
Lens mount
Contacts (p.7)
Mirror (p.75)
Back cover release lever (p.22)
11
<u> Quick Control Dial (p.16)
Tripod socket
<0>Function button(p.23, 32, 68, 72, 73, 74, 80)
Eyecup (p.25, 34)
Battery compartment cover release lever (p.18)
Viewfinder eyepiece
<6> Midroll rewindbutton (p.24)
Film check window
<3> AF pointselection button (p.41, 87)
*Date display panel (p.35)
<Z> Metering mode button (p.52)
*<q> button (p.35)
*<6> button (p.36)
*<7> button (p.36)
Quick Control Dial switch (p.16)
Remote control terminal(p.76)
<w> AE lock (p.70) / ***FE lock / Custom Function setting button (p.84)
<h> AF point selection key(p.41)
* DATE Model only** m Model only*** With an EX-series Speedlite.
12
Nomenclature
LCD Panel
<8> Manual focus
AF point mark
<5> Film mark
Exposure level indicator Exposure compensation amount AEB level Flash exposure compensation amountRed-eye reduction lamp-on indicatorFilm transport indicator
Battery level mark
Frame counter (E - A)Multiple-exposure setting (E - I)Self-timer operation (O - E)Remote control operation (R - E)
Aperture value (Q - V)Red-eye reduction setting (W, E)Beeper setting (W, E)AEB amount (Z - C)DEP points (E, R)Custom Function setting (W - Y)**Calibration No. (E - Y)
Shutter speed(D - K, y)Depth-of-field AE (r)ISO film speed (U - F)Custom Function No. (p - P)**Calibration (u)***FE lock (o)
<D> ISO film speed
<L> AEB
<7> Function pointer
<K> Remote control mark
Metering modeZ Evaluative meteringX Partial meteringC Center-weighted averaging metering
<9> Beeper
<F> Red-eye reduction
<a> Flash exposure compensation
<4> Multiple exposures
<V> Custom Function
** m Model only*** With an EX-series Speedlite.• The actual display will show only the applicable items.
13
Viewfinder Information
AF points(Superimposed display for 7 AF points)
<j> AE lock / ***FE lockAEB in progress
<M> Flash-ready***Improper FE lock warning
Shutter speed (D~K, y) ***FE lock (o)
Focusing screen
<N> ***High-speed sync(FP flash)
Aperture value (Q - V)
Exposure level indicatorExposure compensation amountAEB level
Red-eye reduction lamp-on indicator
<a> Flash exposure compensation
<m> **Eye Control <n> Focus confirmation light
**Calibration indicator (g - Y, h - Y)Depth-of-field AE indicator(r E, R)
14
Nomenclature
Custom Function Set
2OFF
Full Auto
Mode Dial lock release button
Basic Zone
Image Zone
Creative Zone
Mode Dial• The dial has modes in two zones.• The dial is locked when it is set to <2>. To release the lock, holddown the Mode Dial lock release button and turn the dial.
1 Basic ZoneFully automatic mode where thecamera takes care of everything.
Y : Full Auto (p.28)Basically, all you do is point andshoot.
Image Zone (p.30)Fully automatic modes for aparticular subject.
U : Portrait
I : Landscape
O : Close-up
P : Sports
A : Night Portrait
2 Creative ZoneSemi-automatic and manual modesenable you to take control of thecamera to obtain the desired result.
S : Program AE (p.54)
R : Shutter-priority AE (p.56)
E : Aperture-priority AE (p.58)
W : Manual exposure (p.60)
Q : Depth-of-field AE (p.62)
3 Custom Function SetG : Custom Function (p.83)
42 : OFF
15
AF Mode Dial
ONE SHOT AF (p.39)
AI FOCUS AF (p.40)
AI SERVO AF (p.39)
Eye Control OFF (p.49)
Eye Control ON (p.48)
Calibration (p.43)
Self-timer / Remote control mode (p.33, 76)
Continuous (p.73)
Single-frame (p.73)
Eye Control Switch (m Model only)
Film Advance Mode Lever
16
Conventions Used in this Instructions
• The <l> icon indicates the Main Dial.
• All the operations described in this booklet assumethat the Mode Dial is not set to <2>. Beforeproceeding with any operation, turn the Mode Dial toa picture-taking mode by pressing the lock buttonand turning the dial.
• The <u> icon indicates the Quick Control Dial.
• The <i> icon indicates the Quick Control Dialswitch. Operations with the <u> dial assume thatthe <i> switch is already set to <1>. Be sure itis set to <1>.
• The <h> icon indicates the AF point selection key.
• The camera control icons and markings used in this bookletcorrespond to the actual icons and markings found on the camera.
• Reference page numbers are in parentheses.• The ★ symbol indicates that the respective feature can be used only in
Creative Zone modes (S, R, E, W, Q).• In this instruction booklet, a Canon EF 28-105mm f/3.5-4.5 lens is used
for example purposes.• The procedures explained in this booklet assume that the Custom
Functions are set to the default settings.• The (0) and (1) icons indicate that the respective function remains
in effect for 4 and 6 sec. respectively after the button is released.
∗ This instruction booklet includes Eye Control instructions. Ignore thoseinstructions if your camera EOS ELAN 7N/33V does not have EyeControl.
1Before You Start
Attaching the StrapPass the end of the strap throughthe camera’s strap mount from thebottom. Then pass it through thestrap’s buckle as shown in theillustration. Pull the strap to makesure it does not slip out of thebuckle.• The eyepiece cover is alsoattached to the strap. (p.34)
17
This chapter explains a few preliminary steps and basiccamera operations.
Eyepiece cover
12
3
4
18
Installing the Batteries
The camera uses two lithium CR123A (or DL123A) batteries.
1 Open the battery compartmentcover.• Slide the release lever as shown by
the arrow and open the cover.
2 Install the batteries.• Make sure the battery contacts (+
and –) are properly oriented asshown.
• Do not mix old and new batteries.
3 Close the battery compartmentcover.• Press the cover until it snaps shut.
1
2
For places where CR123A (or DL123A) batteries may not be easily available,take spare batteries with you. Also carry spare batteries for extended shootingsessions.
∗ In the Americas, batteries are not included with the camera.
+
--
19
Checking the Battery LevelCheck the battery level after replacing the batteries and before using thecamera.
• The battery life shown above is based on Canon’s testing conditionswith new batteries.
• Figures in parentheses apply when the Eye Control switch is <1>.
Battery Life (With 24-ex. rolls)
Turn the Mode Dial to a shootingmode.• Hold down the dial’s lock release
button while turning the dial.sThe camera will then turn on and the
LCD panel will display one of thefollowing battery level mark:
: Battery level OK.
: The battery level is low. Keepspare batteries handy.
: The batteries will soon becompletely exhausted.
: Replace the batteries.
Temperature 0% Flash Use 50% Flash Use 100% Flash UseAt 20˚C 125 (115) rolls 38 (33) rolls 19 (17) rolls
At –20˚C 70 (65) rolls 20 (19) rolls 10 (9) rolls
• If nothing is displayed on the LCD panel, the batteries may have beeninstalled incorrectly. Take out the batteries and install correctly.
• If you often press the shutter button halfway for a prolonged period or justautofocus without taking a picture, the battery life will be affected.
• When not using the camera, set the Mode Dial to <2>.
20
Mounting and Detaching a Lens
1 Remove the caps.• Remove the rear lens cap and the
camera body cap.
2Mount the lens.• Align the red dots on the lens and
camera and turn the lens as shownby the arrow until it snaps in place.
3 On the lens, set the focus modeswitch to <AF>.• If the focus mode switch is set to
<MF>, autofocus will not operate.
4Remove the front lens cap.
Mounting a Lens
Detaching the Lens
5 While pressing the lens releasebutton, turn the lens as shown bythe arrow.• Turn the lens until it stops, then
detach it.
• Keep the removed caps where you will not lose them.• <AF> stands for “Auto Focus,” and <MF> stands for “Manual Focus.”• An EF-S lens cannot be attached to the camera.
112
Red dots
1
3
2
21
How the Shutter Button Works
If an Extender (sold separately) is used and the maximum aperture (thelowest f/number) of the lens becomes smaller than f/5.6, autofocusing will notoperate.
The shutter button has two stages.You can press it down halfway or fully.The two levels of shutter button operation are as follows:
When it is pressed halfway:sPressing the shutter button down
halfway activates autofocusing (AF)and automatic exposure (AE) and theshutter speed and aperture value areset.
sThe exposure (the combination ofshutter speed and aperture value)appears on the LCD panel and in theviewfinder (0).
When it is pressed fully:sThe shutter is released to take the
picture and the film advances by oneframe.
• After pressing the shutter button halfway, wait a moment before pressing itcompletely to take the picture. If you press the shutter button completely atone stroke or right after pressing it halfway, it will take a moment before thepicture is taken.
• Camera movement during the moment of exposure is called camera shake.Camera shake can cause blurred pictures. To prevent blurred pictures due tocamera shake:· Hold the camera steady.· Use your finger tip to touch the shutter button, grasp the camera with your
entire right hand, then press the shutter button gently.• If the AF Mode Dial has been set to <5>, the focus confirmation
light <n> will not light.• If the AF Mode Dial has been set to <5> and automatic AF point
selection is set (p.42), the AF point will not flash in red.
22
5Loading and Unloading Film
Loading FilmWhen you load the film, it advances automatically to the first frame. WithDX-coded film, the camera automatically sets the film’s ISO speed.
2Open the back cover.• Slide down the back cover release
lever and open the back.
1 Turn the Mode Dial to any settingexcept <2>.• Hold down the dial’s lock release
button while turning the dial.
3 Insert the film cartridge at a slightangle.
4Pull the edge of the film leader tothe orange mark on the camera.• Hold down the film cartridge while
pulling out the film leader.• If you pull out the film leader too
much, rewind it back into the filmcartridge.
5 Close the back cover.• Close the back cover until it snaps
shut.sThe film will advance to frame 1
automatically.sWhile the film advances, the ISO
speed will be displayed on the LCDpanel.
sWhen the initial film advance ends,the <5> icon and frame counter of“E” will be displayed on the LCDpanel.
Wrong
Orange mark
23
If the film is not loaded properly, the <5> icon will blink on the LCD panel andthe shutter will not work. Reload the film properly.
• The shutter curtains have been manufactured with very high precision. Nevertouch them with your fingers. When loading film, do not touch or damage thecurtains with your fingers or film.
• In hot and humid environments, do not remove the film packaging until youare ready to load the film.
• Infrared film cannot be used with this camera.
The camera reads the film cartridge’s DX code and sets the film speedautomatically within ISO 25 - 5000.• Set the Mode Dial to a Creative Zone mode.
Checking the Film Speed
Move the <7> arrow to the <D>icon.• Look at the LCD panel and press the
<0> button to move the arrow.(1)
sThe current film speed is displayed.
If you want to set a film speed different from the DX-coded film speed or if thefilm cartridge is not DX-coded, see “Setting the ISO Film Speed” on page 73.
C.Fn-03-1 can prevent the film speed from being set automatically with the DXcode. (p.85)
24
5Loading and Unloading Film
sDuring film rewind, the LCD panel willindicate the film rewinding and theframe count will count down.
sThe film rewind stops automatically.• Check that the <5> icon is blinking,
then open the camera back and takeout the film.
After the film’s last frame is exposed, the camera rewinds the filmautomatically.
Unloading Film
To rewind the film in midroll, follow the procedure below.
6Midroll Rewind
Press the <6> button.sFilm rewind will begin.sThe film rewind stops automatically.• Check that the <5> icon is blinking,
then open the camera back and takeout the film.
During film rewind, pressing the <6> button toggles between high-speedand low-speed (silent) rewind.
• C.Fn-01-1 can make the film rewind faster. (p.85)• C.Fn-02-1 can leave out the film leader when the film rewind ends. (p.85)
25
Dioptric Adjustment
If the dioptric adjustment knob still cannot make the viewfinder look clear, usea Dioptric Adjustment Lens Ed (10 types sold separately).
By adjusting the diopter, eyeglass wearers will not need their eyeglassesto see a sharp viewfinder image. The camera’s adjustable dioptric rangeis –2.5 to +0.5 dpt.
1 Remove the eyecup.• While grasping both sides at the
bottom of the eyecup, slide it upwardto remove.
2 Turn the dioptric adjustmentknob.• Turn the knob left or right so that the
AF points in the viewfinder looksharp.
• The illustration shows the knob at thestandard setting (–1 dpt).
3 Reattach the eyecup.
26
Holding the Camera
• Firmly grasp the camera grip with your right hand, and press your bothelbows lightly against your body.
• Hold the lens at the bottom with your left hand.• Press the camera against your face and look through the viewfinder.• To maintain a stable stance, place one foot in front of the other instead
of lining up both feet.
Horizontal shooting Vertical shooting
The camera automatically senses whether it is in the horizontal or verticalposition. The camera orientation sensor will make a small sound when youswitch to vertical or horizontal shooting.
To avoid taking blurred pictures, hold the camera steady to minimizecamera shake.
2Fully Automatic Shooting
Turn the Mode Dial to <Y>,<U>, <I>, <O>, <P>, or<A>.• The picture-taking procedure isthe same as with the “<Y> FullAuto mode” on page 28.
• The settings automatically set bythe Basic Zone modes areshown in the “Feature AvailabilityTable” on page 91.
27
This chapter describes how to use the camera’s Basic Zonemodes <Y> <U> <I> <O> <P> <A> for quick and easyshooting. In these modes, all you do is point and shoot. Also,these modes override the camera’s <l> <u> and AF Modedials, film advance mode lever (except <p>), and buttons(except <0> <6> and the shutter button). This is toprevent spoiled shots caused by accidental operation ofcamera controls.
Basic Zone
28
YFull Auto ModeAll you do is point the camera and press the shutter button. Everything isautomatic so it is easy to photograph any subject. With seven AF pointsto focus the subject, you just point and shoot.
1 Turn the Mode Dial to <Y>.
2Aim any of the AF points on thesubject.• The main subject, as determined by
the camera, will be focused by one ofthe AF points.
• To focus a subject not covered by anyof the AF points, see “Focusing Off-Center Subjects” on page 50.
3 Focus the subject.• Press the shutter button halfway to
focus.sWhen necessary, the built-in flash will
pop up automatically.sThe AF point that achieves focus will
flash in red. The beeper will alsosound and the focus confirmationlight <n> in the viewfinder will light.
AF point
4Check the exposure setting.sThe shutter speed and aperture
value will be set automatically anddisplayed in the viewfinder and onthe LCD panel. (0)
Aperture value
AF point mark
Shutter speed
29
Under low-light conditions, the built-in flash fires a brief burst of flasheswhen you press the shutter button halfway. This is to illuminate thesubject to enable easier autofocusing.
• The AF-assist beam does not function in the <I> <P> modes.• The built-in flash’s AF-assist beam is effective up to about 4 meters/13.1
feet.• In the Creative Zone modes, if the built-in flash is popped up, the AF-assist
light will emitted when necessary.
Take the picture.• Compose the shot and press the
shutter button fully.
• When focus is achieved, the autofocus and auto exposure setting will also belocked.
• If the focus confirmation light <n> blinks, the picture cannot be taken. (p.51)• Out of the seven AF points, the one covering the closest subject is selected
automatically to achieve focus.• If multiple AF points flash in red simultaneously, it indicates that all those AF
points have achieved focus.• In the Basic Zone modes (except <I> <P> ), the built-in flash will pop up
and fire automatically in low-light or backlit conditions. To retract the flash,push it back down.
5
• If you want to zoom, do it before focusing. Turning the zooming ring afterachieving focus may throw off the focus.
• If the built-in flash’s pop-up operation is obstructed, the <r> icon will blink onthe LCD panel. Press the shutter button halfway to resolve the problem.
AF-Assist beam with the Built-in Flash
30
Programmed Image Control Modes
This mode blurs the background to make thehuman subject stand out.• Holding down the shutter button executes
continuous shooting.• For better background blur, use a telephoto lens
and fill the frame with the subject or have thesubject stand closer to the camera.
sThis automatically sets the AF mode to<4>, the film advance mode to <H>,and the metering mode to <Z>.
Select a shooting mode to suit the target subject, and the camera will beset to obtain the best results.
This is for wide scenic views, night scenes, etc.• Using a wide-angle lens will further enhance the
depth and breadth of the picture.sThis automatically sets the AF mode to
<4>, the film advance mode to <J>(single-frame shooting), and the metering modeto <Z>.
U Portrait
I Landscape
Use this mode to take close-up shots offlowers, insects, etc.• As much as possible, focus the subject at the
lens’ closest focusing distance.• To obtain a larger magnification, use the
telephoto end of a zoom lens.• For serious close-up shots, optional EOS-
dedicated macro lenses are recommended.sThis automatically sets the AF mode to
<4>, the film advance mode to <J>(single-frame shooting), and the metering modeto <Z>.
O Close-up
31
• A blinking shutter speed indicates that the shutter speed is too slow toprevent a blurred picture caused by camera shake. Hold the camera steadyand press the shutter button smoothly, or use a tripod. (The shutter speedindicator still blinks when you use a tripod, but camera shake will not be aproblem.)
• In the <A> mode, use a tripod to prevent camera shake.
This is for fast-moving subjects when you wantto freeze the action.• The camera will first track the subject with the
center AF point. Focus tracking will thencontinue with any of the seven AF pointscovering the subject.
• While you hold down the shutter button, focusingwill continue for continuous shooting.
• Using a telephoto lens and ISO 400 or higherspeed film is recommended.
• The focus confirmation light will not light evenwhen focus is achieved.
sThis automatically sets the AF mode to<5>, the film advance mode to <H>,and the metering mode to <Z>.
P Sports
This mode is for taking pictures of people attwilight or at night. The flash illuminates thesubject while a slow sync speed obtains anatural-looking exposure of the background.• If you want to photograph only a night scene
(without people), use the <I> mode instead.• Tell the subject to keep still even after the flash
fires.sThis automatically sets the AF mode to
<4>, the film advance mode to <J>(single-frame shooting), and the metering modeto <Z>.
A Night Portrait
32
FUsing Red-eye Reduction (with the built-in flash)
When flash is used in a low-light environment, the subject’s eyes maycome out red in the photograph. “Red eye” happens when the light fromthe flash reflects off the retina of the eyes.The camera’s red-eye reductionfeature turns on the red-eye reduction lamp to shine a gentle light into thesubject’s eyes to narrow the pupil diameter or iris. A smaller pupil reducesthe chances of red eye from occurring. Red-eye reduction can be set inany shooting mode except <I> <P>.
2 Turn the <l> dial to set “E” onthe LCD panel.• Press the shutter button halfway to
return to normal camera operation.• To cancel red-eye reduction, set “W”
on the LCD panel.
1 Move the <7> arrow to the <F>icon on the LCD panel.• Look at the LCD panel and press the
<0> button to move the arrow.(1)
• When you press the shutter button halfway, thered-eye reduction lamp-on indicator will appear inviewfinder and on the LCD panel.
• Red-eye reduction will not work unless thesubject looks at the red-eye reduction lamp. Tellthe subject to look at the lamp.
• For maximum effectiveness, press the shutterbutton fully after the red-eye reduction lamp turnsoff (after 1.5 sec.).
• You can take a picture even while the red-eye reduction lamp is lit.• The effectiveness of red-eye reduction varies depending on the subject.• To further increase the effectiveness of red-eye reduction, go to a brighter
environment or move closer to the subject.
Red-eye reductionlamp-on indicator
33
Do not stand in front of the camera when you press the shutter button to startthe self-timer. Doing so prevents the camera from focusing the subject.
• To cancel the self-timer after it starts, set the film advance mode lever to<J> (single-frame shooting) or <H>.
• When using the self-timer to take a picture of only yourself, first lock thefocus (p.50) on an object at the same distance where you will be in thepicture.
• The self-timer beeper can be silenced. (p.74)
You can use self-timer in any Basic Zone mode or Creative Zone mode.We recommend using a tripod when you use the self-timer.
qUsing the Self-timer
1 Set the film advance mode leverto <p>.sThe <K> icon will be displayed on the
LCD panel.
2 Take the picture.• The picture-taking procedure is the
same as with the <Y> Full Automode on page 28.
• Look through the viewfinder andpress the shutter button fully to startthe self-timer.
sThe picture will be taken about 10sec. later.During the first 8 seconds, thebeeper beeps slowly and the red-eyereduction lamp flashes.During the final 2 seconds, thebeeper beeps faster and the red-eyereduction lamp stays lit.
sDuring the self-timer operation, theLCD panel counts down the secondsuntil the picture is taken.
34
Using the Eyepiece Cover
Attach the eyepiece cover.• The eyepiece cover is attached to the
strap.• Slide the eyepiece cover down into
the eyepiece groove to attach it.
When using the self-timer or optional wireless remote control, you shoulduse the eyepiece cover (p.17) to prevent stray light from entering theeyepiece and affecting the exposure reading.
1
2
Remove the eyecup from theeyepiece.• Push up both sides at the bottom of
the eyecup.
Month, day, year (Dec. 24, 2004)
Day, month, year (24 Dec. 2004)
Year, month, day (2004 Dec. 24)
Day, hour, minute (24th 16:45)
Hyphens (Blank)
• <W> is displayed above the month.• When a picture is taken, the bar <9> will blink to indicate that the
date or time has been imprinted.
35
Imprinting the Date or Time (DATE Model only)
The camera has a date feature withan automatic calendar to 2019. It canimprint the date or time on thephotograph as shown in the leftphoto.The date or time can be imprinted inany shooting mode.
Press the <q> button.sEach time the button is pressed, the
imprinting format changes in thefollowing sequence as shown on thequartz date display panel:
36
Imprinting the Date or Time (DATE Model only)
Setting the Date and Time
Replacing the Date Battery
1 Select the date or time display.• Press the <q> button.
1 Remove the battery chamber cover.• Open the camera back and loosen
the screw as shown in the illustration.
2 Take out the battery.
3 Insert a new battery.• The battery’s positive contact (+)
must face up.
4Reattach the battery chamber cover.• Set the correct date and time.
2Select the digit to be set.• Press the <6> button until the
digit blinks.sEach time you press the button, the
settable digit will change as follows:Year→ month → day. Or hour → minute →“a”
3 Set the correct number.• Keep pressing the <7> button until
the correct number appears.• Repeat steps 2 and 3 until all the
date and time digits are set correctly.
4Finalize the setting.• Keep pressing the <6> button
until no digits blink.• If “a” is blinking and you press
<6>, the seconds will be resetto 0.
When the date/time on the imprinted photograph looks faded, replacethe CR2025 lithium battery as follows. Battery life is about 3 years.
3AF Modes and Metering
Modes
• The ★ symbol indicates that the respective feature canbe used only in Creative Zone modes (S,R,E,W,Q).
37
The viewfinder has seven AFpoints.You can select the AF pointclosest to the subject to make iteasier and faster to compose thepicture.You can also select the AFmode to suit the subject orshooting conditions.
Evaluative, partial, and center-weighted averaging meteringmodes are provided. Set themetering mode to suit shootingconditions and obtain the desiredexposure.
38
Selecting the AF Mode★
The AF mode is the autofocusing method. The camera has three AFmodes: 1. One Shot AF for still subjects, 2. AI Servo AF for movingsubjects, and 3. AI Focus AF that switches automatically from One-ShotAF to AI Servo AF if the subject starts to move.
1 Set the lens focus mode switch to<AF>.
2Set the Mode Dial to a CreativeZone mode.
3 Turn the AF mode dial to selectthe AF mode.
ONE SHOT : One-Shot AF
AI FOCUS : AI Focus AF
AI SERVO : AI Servo AF
39
While you press the shutterbutton halfway, the camerafocuses continuously• This AF mode suits moving subjects
when the focusing distance keepschanging.
sWith predictive AF∗, the camera canalso focus track a subject whichsteadily approaches or retreats fromthe camera.
sThe exposure settings are setimmediately before the picture istaken.
If focus has not been achieved, the focus confirmation light <n> in theviewfinder will blink. In this case, you cannot take a picture even when youpress the shutter button fully. Recompose the shot and try and focus again.Also see “When Autofocus Fails” (p.51).
AI Servo AF for Moving Subjects
One-Shot AF for Still SubjectsPressing the shutter buttonhalfway activates AF operationand achieves focus once.sThe AF point which achieves focus
will flash briefly and the focusconfirmation light in the viewfinder willlight at the same time.
sWith evaluative metering, theexposure setting (shutter speed andaperture value) will be set when focusis achieved. The exposure setting andfocus will be locked as long as theshutter button is pressed halfway.(p.50) You can then recompose theshot while retaining the exposuresetting and point of focus.
AF point Focusconfirmation light
40
Selecting the AF Mode★
• When focus is achieved, the focus confirmation light <n> in the viewfinderwill not light and the beeper will not sound.
• If the focus confirmation light <n> in the viewfinder blinks, it means focushas not been achieved.
• Focus lock cannot be used.
With C.Fn-04-2, holding down the <w> button will temporarily stop theAF operation in the AI Servo AF mode. (p.85)
∗ Predictive AFIf the subject approaches or retreats from the camera at a constant rate,the camera tracks the subject and predicts the focusing distanceimmediately before the picture is taken. This is for obtaining correct focusat the moment of exposure.• When the AF point selection is automatic, the camera first uses the
center AF point to focus. If the subject moves away from the center AFpoint, focus tracking continues as long as the subject is covered byanother AF point. The active AF point will not flash in red.
• With a manually selected AF point, the selected AF point is used forpredictive AF.
• In the Eye Control mode, Eye Control Servo AF (p.49) will be used. Aslong as one of the AF points cover the moving subject, predictive AFwill continue to track the subject as you follow it with your eye.
AI Focus AF for Automatic AF Mode SwitchingThe AI Focus AF mode switchesautomatically from One-Shot AF to AIServo AF if the subject starts to move.If focus is achieved in the One-Shot AFmode and the subject starts to movecontinuously, the camera will detect themovement and switch automatically toAI Servo AF to focus track the subject.
41
If you use an external, EOS-dedicated Speedlite and focus cannot beachieved with the AF-assist beam, select the center AF point.
3Selecting an AF Point★
The AF point is used for focusing. The AF point can be selectedautomatically by the camera or manually by you. In the Basic Zonemodes and <Q> mode, the AF point selection is automatic only.In the <S> <R> <E> <W> modes, the AF point can be selectedeither automatically or manually.
• Automatic AF Point SelectionThe camera selects the AF point automatically to match the subject.
• Manual AF Point SelectionYou can select any of the seven AF points manually. This is best whenyou want to focus a particular subject, or to compose a particular shotquickly.
• Eye Control (p.43 - 49)Select one of the seven AF points by looking at it.
Basic Procedure for AF Point Selection
1 Set the Eye Control switch to<2>.
2Press the <3> button. (1)sThe current AF point will be indicated
on the LCD panel and in theviewfinder.
3 Select the desired AF point.• Look at the viewfinder or LCD panel
and press the <h> key.sPress the <h> keys on the left,
right, top, or bottom to select the left,right, top, or bottom AF pointrespectively.
• To return to shooting, press theshutter button halfway or press the<3> button again.
42
3Selecting an AF Point★
Display the desired AF point inred.• See the diagram on the left on how
the AF point selection changes withthe <3> button.
• When you press the <3> button toswitch from automatic AF pointselection to manual AF pointselection, the selection will start withthe center AF point.
Display all AF points in red.• When you try to select an AF point
beyond a peripheral AF point,automatic focusing selection will beset.
• C.Fn-10-1 can disable the AF point from flashing in red. (p.87)• C.Fn-11-1 enables you to select a AF point directly with the <h> keys
without having to press the <3> button first. (p.87)• C.Fn-11-2 enables you to select a AF point with the <l> and <u> dials
instead of the <h> keys. (p.87)• C.Fn-12-1 can make the <3> button switch to the center AF point. (p.88)
Automatic Selection
Manual Selection
Automatic Selection
Automatic Selection
Aut
omat
icS
elec
tion
Aut
omat
icS
elec
tion
Center AF point selected
43
With Eye Control, the camera detects which AF point your eye is lookingat. That AF point is then selected and used to focus the subject.
e Eye Control Calibration (m Model only)
1 Set the Eye Control switch to<e>.s“u” and the CAL No. are displayed
on the LCD panel.Blinking number:Indicates unregistered calibration.Non-blinking number:Indicates registered calibration.
2Select a blinking CAL No.• Turn the <l> dial to select a
number.• If there is no blinking CAL No., see
“Deleting Eye Control CalibrationSettings” on page 47.
3 Hold the camera horizontally andlook at the viewfinder.
Calibration ProcedureBefore using Eye Control, you must calibrate the camera so that it cancorrectly detect the movements of your eye looking through theeyepiece. To calibrate it, look at the blinking AF point, then press theshutter button.You must calibrate it for both the horizontal and verticalcamera orientations. The camera can save up to five calibration settings.• To maximize the calibration precision, read “Eye Control
Calibration and Operation Tips” on page 46.• Before starting, complete any necessary dioptric adjustment. (p.25)• While calibrating the camera, do not take your eye off the eyepiece.∗ “e” stands for calibration.
44
e Eye Control Calibration (m Model only)
Let go of the shutter button.
4
5Repeat steps 4 and 5.sThe AF point will blink in the following
sequence: 2 → 3 → 4.
6
Check the viewfinder display.sWhen the calibration is completed,
the CAL No. will stop blinking and“i” will be displayed.
7
Hold the camera vertically andlook at the viewfinder.• Calibrate vertically under the same
CAL No.• You can hold the camera vertically
with the grip pointing up or down.
8
Keep looking at the blinking AFpoint in the viewfinder and pressthe shutter button.• The right-most AF point will blink first.
While looking at the blinking AF point,press the shutter button.
sThe AF point will stop blinking andstay lit. The beeper will sound at thesame time.
• During this calibration procedure,pressing the shutter buttoncompletely will not take a picture.
1
23
4
45
9While looking at the blinking AFpoint, press the shutter button.• Follow steps 4 to 6.sThe AF point will blink in the following
sequence: 5 → 6 → 7 → 8.
10Check the viewfinder display.sWhen the calibration is completed,
the CAL No. will stop blinking and“i” will be displayed.
11Set the Eye Control switch to<g>.• This completes the calibration
procedure, and you can now use EyeControl (p.48) to take pictures.
• If you do the calibration procedure only for the horizontal orientation, EyeControl during vertical picture-taking might not be so accurate. Be sure toalso complete the calibration procedure for the vertical orientation.
• If you interrupt the calibration procedure, wait until the AF point in theviewfinder stops blinking, then start over from step 3.
• If the calibration does not go well, see “Eye Control Calibration OperationTips” (p.46).
• If the beeper setting (p.74) is set to “W”, the beeper will not sound.
If the camera does not detect your eye movement properly during thecalibration, the beeper will sound and the CAL No. will blink on the LCD panel.In such a case, press the shutter button and start from step 3.
5
6
78
46
e Eye Control Calibration (m Model only)
Eye Control Calibration and Operation Tips• Hold the camera as you always do while looking through the viewfinder.• Look through the viewfinder so you can see all four corners of the
viewfinder.• Avoid squinting or blinking your eye.• When using Eye Control, look through the eyepiece in the same way
you did during the calibration.• During the calibration procedure, keep looking (without moving your
eye) at the blinking AF point until it lights and the beeper sounds.• Keep both eyes open while looking through the viewfinder.• If you wear eyeglasses, wear them properly without having them slide
down your nose.
Eye Control calibration and operation might not be possible in thefollowing cases:• When you wear bifocal eyeglasses or hard contact lenses.• You wear mirror-type sunglasses or other specially-coated glasses.• Your eye is too far away from the eyepiece due to eyeglasses, etc.• Your eye is too close to the viewfinder.
Intelligent Eye ControlYou can repeat the calibration procedure under different conditions suchas when you are outdoors, indoors, or at night. The camera can savethese additional calibration settings under the same CAL No. Byaccumulating more calibration settings, the camera can provide moreprecise Eye Control.
Two or more users must not share the same CAL No. Each user should havehis or her own CAL No. If necessary, delete the calibration settings savedunder another CAL No. to store another user’s calibration settings. (p.47)
47
Deleting Eye Control Calibration SettingsIf you want to save new calibration settings under a CAL No. that alreadyhas calibration settings, follow the procedure below to first delete theprevious calibration settings.You can then do the calibration procedureand save the new calibration settings under that CAL No.
1 Set the Eye Control switch to<e>.
2Select the CAL No. whosecalibration settings are to bedeleted.• Select a non-blinking CAL No.
3 Press the <w> button and <3> button simultaneously.sThe CAL No. will start blinking to
indicate that the calibration settingshave been deleted.
48
gUsing Eye Control (m Model only)
With Eye Control, you just look at the AF point where you want to focus.• Eye Control can be used in all shooting modes except <Y> (Full
Auto).• In the <Y> (Full Auto) mode, Eye Control information is also added to
the automatic AF point selection program for more precise automaticAF point selection.
1 Set the Eye Control switch to<e>.
2Select the CAL No.• Turn the <l> dial to select your
CAL No.Non-blinking number:Indicates registered calibration.Blinking number:Indicates unregistered calibration.
3 Set the Eye Control switch to<g>.
4Select a shooting mode.• Turn the Mode Dial to select the
desired shooting mode.
5 Turn the AF mode dial to selectthe AF mode.
49
6Keep looking at the focusingpoint you want to select andpress the shutter button halfway.sThe <m> icon lights in the
viewfinder.sThe AF point you look at will flash in
red and focus the subject.
7 Take the picture.
• If the camera fails to detect which AF point you are looking at, the <m> iconin the viewfinder will blink and automatic AF point selection will take effect.
• If Eye Control does not work well, check if you are using the correct CAL No.and see “Eye Control Calibration and Operation Tips” on page 46.
Eye Control Servo AFWhen you use Eye Control in the AI Servo AF mode (or AI Focus AF setto AI Servo AF), you can focus a moving subject continuously just bylooking at it. This is called Eye Control Servo AF.If the subject focused with Eye Control starts to move, you can continueto focus-track the subject with your eye by looking at the next AF pointcovering the subject while holding down the shutter button halfway.
Turning Off Eye ControlTurn the Eye Control switch to <2>.The AF point can then be selectedautomatically or manually.
50
Focusing Off-Center SubjectsAfter achieving focus, you can lock the focus on a subject andrecompose the shot. This is called “focus lock.”Focus lock works when the AF mode is set to One Shot AF.
1 Set the camera to a Creative Zonemode.
2Select the desired AF point.
3 Focus the subject.• Aim the AF point on the subject, then
press the shutter button halfway.
4Keep pressing the shutter buttonhalfway and recompose thepicture as desired.
5 Take the picture.
Focus lock also works in the Basic Zone modes (except <P>). Just start fromstep 3 above.
51
When Autofocus Fails (Manual Focusing)Autofocus can fail to achieve focus (the focus confirmation light <n>blinks) with certain subjects such as the following:
Difficult Subjects for Autofocusing• Low-contrast subjects.
Example: Blue sky, flat surface with a solid color.• Subjects in very low light.• Extremely backlit or reflective subjects.
Example: Automobile with a strong reflection.• Overlapping near and far objects.
Example: Animal behind bars in a cage.
In such cases, do one of the following:(1)Focus lock an object at the same distance as the subject and
recompose.(2)Set the lens focus mode switch to <MF> and focus manually.
8Manual Focusing
1 Set the lens focus mode switch to<MF>.
2 Focus the subject.• Turn the lens focusing ring until the
subject looks sharp.
If you hold down the shutter button halfway while focusing manually, the AFpoint achieving focus will flash in red and the focus confirmation light <n> willlight.
Focus ring
52
ZMetering Modes★
The camera has three metering modes: Evaluative, partial, and center-weighted averaging metering. The Basic Zone uses evaluative metering.In the Creative Zone, any of the three modes can be selected.
Partial metering and FE lock can be linked to the active AF point. (See page87 for C.Fn-08-1.)
1 Press the <Z> button. (1)
2Select the metering mode.• Turn the <l> dial.
• To start shooting again, press theshutter button halfway or press the<Z> button again.
ZEvaluative meteringThis is the camera’s standard metering mode suited formost shooting including backlit conditions. Based on thesubject’s position in the viewfinder, brightness, background,front or back lighting conditions, etc., the camera alwayscalculates the proper exposure for the subject.• During manual focusing, evaluative metering is based on the
center AF point.• If the subject brightness and background light level are very
different (strong backlight or spotlight), partial metering (X)is recommended instead.
XPartial meteringThis is effective for backlit subjects. An area covering about10% of the viewfinder screen at the center is used formetering. The partial metering area is shown on the left.
CCenter-weighted averaging meteringThe metering is weighted at the center and then averagedfor the entire scene.
4User-Controlled Shooting
53
With Creative Zone modes, youcan set the desired shutter speedor aperture value to obtain theexposure you want.You takecontrol of the camera.
Creative Zone
• The ★ symbol indicates that the respective feature canbe used only in Creative Zone modes (S,R,E,W,Q).
• Press the shutter button halfway and release, and theexposure setting will be displayed for approximately 4seconds on the LCD panel and viewfinder.
• The functions that can be set in Creative Zone modes arelisted in the “Function Availability Table” (p.91).
• Before proceeding, turn the <i> switch to <1>.
54
S Program AELike the <Y> (Full Auto) mode, thisis a general-purpose mode to makepicture-taking easy. It sets theshutter speed and aperture valueautomatically to suit the subject’sbrightness.∗ <S> stands for Program.∗ “AE” stands for auto exposure.
1 Turn the Mode Dial to <S>.
2 Focus the subject.• Move the AF point over the subject
and press the shutter button halfway.
3 Check the display.sThe shutter speed and aperture
value are set automatically anddisplayed in the viewfinder and onthe LCD panel.
• If the shutter speed and aperturevalue do not blink, a correct exposurewill be obtained.
AF point
Aperture valueShutter speed
AF point mark
55
4Take the picture.• Compose the shot and press the
shutter button fully.
• If the “K” shutter speed and maximum aperturedisplay blink, it means the subject is too dark. Useflash.
• If the “D” shutter speed and minimum aperturedisplay blink, it means the subject is too bright. Attachan ND filter (sold separately) to reduce the lightentering the lens.
The Difference Between <S> and <Y>• The shutter speed and aperture value are set in the same way in both
modes.• The following features can be used in the <S> mode, but not in the <Y>
mode.
About Program Shift• In the Program AE mode, you can freely change the shutter speed and
aperture value combination (program) set by the camera while retaining thesame exposure. This is called program shift.
• To shift the program, press the shutter button halfway and turn the <l>dial until the desired shutter speed or aperture value is displayed.
• Program shift is canceled automatically after the picture is taken.• Program shift cannot be set when the built-in flash is used.
· Manual AF point selection· Metering mode selection· Film advance mode selection· Program shift· Exposure compensation· AEB· AE lock with the <j> button· Depth-of-field preview· Multiple exposures
· Custom Functions· Built-in flash manual firing· EX-series Speedlite compatibility
- FE lock- High-speed sync (FP flash)- Flash ratio control- FEB- 2nd-curtain sync- Modeling flash
56
R Shutter-Priority AEIn this mode, you set the shutter speed and the camera sets the aperturevalue automatically to suit the subject brightness. A fast shutter speedcan freeze the motion of a fast-moving subject and a slow shutter speedcan blur the subject to give the impression of motion.∗ <R> stands for Time value which is the shutter speed.
Taken with a fast shutter speed. Taken with a slow shutter speed.
1 Turn the Mode Dial to <R>.
2Select the desired shutter speed.• Turn the <l> dial.• The shutter speed can be set in half-
stop increments.
3 Press the shutter button halfwayto focus the subject.sThe aperture value is set
automatically.
4Check the viewfinder display andtake the picture.• A correct exposure will be obtained
as long as the aperture value displayis not blinking.
57
• If the maximum aperture value blinks, it indicatesunderexposure. Turn the <l> dial to set a slowershutter speed until the blinking stops.
• If the minimum aperture value blinks, it indicatesoverexposure. Turn the <l> dial to set a fastershutter speed until the blinking stops.
Shutter Speed DisplayThe shutter speeds from “D” to “R” indicate the denominator of thefractional shutter speed. For example, “S” indicates 1/125 sec. Also, “H”indicates 0.7 sec, and “J” indicates 15 sec.
58
E Aperture-Priority AEIn this mode, you set the desired aperture value and the camera sets theshutter speed automatically to suit the subject brightness.The larger or brighter the aperture (lower f/number) the more blurred thebackground will become. This effect is ideal for portraits. The smaller ordarker the aperture (higher f/number), the clearer the focus will be forboth near and far objects (wider depth of field).∗ <E> stands for aperture value.
Taken with a small aperture.Taken with a large aperture.
1 Turn the Mode Dial to <E>.
2Select the desired aperture value.• Turn the <l> dial.• The aperture value can be set in half-
stop increments.
3 Press the shutter button halfwayto focus the subject.sThe shutter speed is set
automatically.
4Check the viewfinder display andtake the picture.• A correct exposure will be obtained
as long as the shutter speed displaydoes not blink.
59
• If the slowest shutter speed blinks, it indicatesunderexposure. In such a case, turn the <l> dial toset a larger aperture value (smaller f/number) until theshutter speed display stops blinking.
• If the fastest shutter speed blinks, it indicatesoverexposure. In such a case, turn the <l> dial toset a smaller aperture value (larger f/number) until theshutter speed display stops blinking.
Aperture Value DisplayThe larger the f/number, the smaller the diaphragm will be. The aperture valuedisplay will differ depending on the lens. When no lens is attached to thecamera, “Q” will be display for the aperture value.
Depth-of-field Preview★
Press the depth-of-field preview buttonto stop down to the current aperturesetting. The diaphragm in the lens willbe set to the current aperture so youcan check the depth of field (range ofacceptable focus) through theviewfinder.
• This feature can be used in the Creative Zone.• While you press the depth-of-field preview button, the exposure will also be
locked (AE lock).
60
W Manual ExposureIn this mode, you set both the shutterspeed and aperture as desired. Todetermine the exposure, refer to theexposure level indicator in theviewfinder or use a handheldexposure meter. This method iscalled manual exposure. In the <W>mode, the center-weighted averagingmetering will be set automatically.∗ <W> stands for Manual.
1 Turn the Mode Dial to <W>.
2Select the desired shutter speed.• Turn the <l> dial.
3 Select the desired aperture value.• Turn the <i> switch to <1> and
turn the <u> dial.
4Press the shutter button halfwayto focus the subject.sThe exposure setting will be
displayed.• The exposure level mark <z>
indicates how close the exposurelevel is to the correct exposure.
61
5 Determine the exposure.• Look at the exposure level indicator
and set the shutter speed andaperture value as desired.
6Take the picture.
If the exposure level mark <z> blinks at the <o> or <s> level, it indicatesthat the difference between the standard exposure exceeds +/–2 stops.
Exposure level mark
Standard exposure index
: This is the reference point for a standard exposure.
: To set it to the standard exposure level, set a slower shutterspeed or a larger aperture value (smaller f/number).
: To set it to the standard exposure level, set a faster shutterspeed or a smaller aperture value (larger f/number).
62
Q Depth-of-field AE
Depth-of-field AE with a Manually-Selected AF Point
The depth-of-field AE mode is for obtaining wide depth of field between anear and far subject. It is effective for group shots and landscapes. Theoptimum point of focus, aperture, and shutter speed are setautomatically to obtain the desired depth of field. For DEP, you canspecify the AF points manually or with Eye Control AF.• The <Q> mode cannot be used if the lens focus mode switch is set
<MF>. Make sure it is set to <AF>.∗ <Q> stands for depth of field.
1 Turn the Mode Dial to <Q>.sThe AF mode will be set
automatically to <4>.
2 Turn the Eye Control switch to<2>.
3 Select the AF point.• Press the <3> button and use
the <h> keys to select the AFpoint.
• If automatic AF point selection hasbeen set, use the center AF point tofocus.
63
4Focus the nearest subject.• Aim the selected AF point on the
nearest subject, then press theshutter button. (0)
sThe focus confirmation light <n> willlight, and “s” will be displayed.
• In steps 4 and 5, pressing theshutter button completely will not takethe picture.
5 Focus farthest subject.• Repeat step 4.s“d” will be displayed.• Steps 4 and 5 can also be done in
reverse order.
6Compose the picture and pressthe shutter button halfway. (0)sThe optimum point of focus, aperture,
and shutter speed to obtain thedesired depth of field are setautomatically.
• When you let go of the shutter button,the display will change to “r”.
• The exposure setting is set when thepicture is taken.
7 Take the picture.• The desired depth of field will be
obtained as long as the aperturevalue display does not blink.
• A correct exposure will be obtainedas long as the shutter speed andaperture value displays do not blink.
64
Q Depth-of-field AE
Depth-of-field AE with Eye Control (m Model only)
With Eye Control, you can easily set the desired depth of field withouthaving to recompose so much.
1 Turn the Mode Dial to <Q>.
2Set the Eye Control switch to<g>.• Make sure the correct CAL No. has
been set. (p.48)
3 Focus the nearest subject youwant in focus.• Look at the subject and press the
shutter button. (0)sThe focus confirmation light <n> will
light, and “s” will be displayed.• In steps 3 and 4, pressing the
shutter button completely will not takethe picture.
4Focus the farthest subject youwant in focus.• Repeat step 3.s“d” will be displayed.• Steps 3 and 4 can also be done in
reverse order.
• If the aperture display blinks, it means that the desireddepth of field cannot be obtained. Move further awayfrom the subject or use the wide-angle end if you areusing a zoom lens. Then try it again.
• If the “K” shutter speed and maximum aperturedisplay blink, it means the subject is too dark. The<Q> mode cannot be used.
• If the “D” shutter speed and minimum aperturedisplay blink, it means the subject is too bright. Attachan ND filter (sold separately) to reduce the lightentering the lens.
65
5 Press the shutter button halfway.• While looking at the AF point where
you want the exposure to be set,press the shutter button halfway.
sThe optimum point of focus, aperture,and shutter speed to obtain thedesired depth of field are setautomatically.
• When you let go of the shutter button,the display will change to “r”.
• The exposure setting is set when thepicture is taken.
6Take the picture.• If the aperture value display does not
blink, the desired depth of field will beobtained.
• A correct exposure will be obtainedas long as the shutter speed andaperture displays do not blink.
66
Q Depth-of-field AE
• If you are using a zoom lens, do not zoom before the picture is taken.• If a slow shutter speed is set, use a tripod to prevent camera shake.• The <Q> mode cannot be used if the lens focus mode switch is set
<MF>. The result will be the same as using the <S> mode.• The <Q> mode cannot be used if you use flash or remote control. The
result will be the same as using the <S> mode with flash.• If you are using the <Q> mode with a lens that has a focus-limiting
switch, set the switch to “minimum focusing distance - ∞.”
• To cancel <Q> at any time, turn the Mode Dial to any setting except<Q>.
• To check the depth of field while using depth-of-field AE, set DEP points 1and 2 and press the shutter button halfway. Then press the depth-of-fieldpreview button.
• To further increase the depth of field, use a wide-angle lens.• Setting DEP points 1 and 2 at the same point on the subject will make the
depth of field shallow. The foreground and background will then be blurred,making the subject stand out. Using a telephoto lens enhances this effect.
67
Exposure Compensation★
Exposure compensation is used to alter the camera’s standard exposuresetting.You can make the picture look lighter (increased exposure) ordarker (decreased exposure). The exposure compensation amount canbe set up to +/–2 stops in half-stop increments.
1 Turn the Mode Dial to a CreativeZone mode except <W>.
2Check the exposure setting.• Press the shutter button halfway and
check the display.
3 Set the exposure compensationamount.• Turn the <i> switch to <1> and
turn the <u> dial.• To cancel the exposure
compensation, set the exposurecompensation amount to <b>.
• The exposure compensation amount set is retained even after the Mode Dialis set to <2>.
• Assuming that a shutter speed of 1/125 sec. and an aperture value of f/8.0 willgive a correct exposure, setting the exposure compensation amount to plus orminus 1 stop will change the shutter speed or aperture value as follows:
Standard exposure index
Exposure level mark
Increased exposure
Decreased exposure
–1 stop ← 0 → +1 stopShutter speed 250 ← 125 → 60Aperture value 11 ← 8.0 → 5.6
Decreasedexposure
Increasedexposure
4Take the picture.
68
LAuto Exposure Bracketing (AEB)★
With AEB, the camera automatically changes the exposure within a setrange (up to +/-2 stops in 1/2-stop increments) for three successiveframes.
1 Move the <7> arrow to the <L>icon.• Look at the LCD panel and press the
<0> button. (1)
2Set the desired AEB amount.• Turn the <l> dial.• Press the shutter button halfway to
return to normal camera operation.
3 Take the picture.sThe three bracketed shots will be
exposed in the following sequence:standard exposure, decreasedexposure, and increased exposure.
sAs shown on the left, the respectivebracketing amount will be displayedas each bracketed shot is taken.
sThe picture will be taken in thecurrent film advance mode.
Standard exposure (0) Decreased exposure (–1/2 stop) Increased exposure (+1/2 stop)
standard exposure
decreased exposure
increased exposure
AEB amount
AEB range
• During AEB shooting, the <7> arrow will appear next to the <L> icon and theAEB level <x> will be displayed. In the viewfinder, the <j> icon will blink.
• In the <H> film advance mode, the camera stops shooting automaticallyafter taking the three AEB shots. In the <J> (single frame) mode, press theshutter button completely three times to take the three AEB shots.
• If you use the self-timer or remote control, the three AEB shots will be takencontinuously automatically.
• If C.Fn-05-1 is set (mirror lockup), single-frame film advance will take effectduring AEB shooting even if the continuous film advance mode has been set.
• AEB can also be set in combination with exposure compensation. If you setthe exposure compensation amount beyond the displayable range, theindicator will look as shown below. However, the exposure compensationamount will still take effect.In the <S> <R> <E> <Q> modes:
: ±1 stop AEB.
: ±1 stop AEB with –1-stop exposure compensation.
: ±1 stop AEB with –1.5-stop exposure compensation.
: ±1 stop AEB with –2-stop exposure compensation.
In the <W> mode:
: ±1 stop AEB with –2-stop exposure compensation.
: ±1 stop AEB with over –2-stop exposure compensation.
69
Canceling AEB
• After the three bracketed shots aretaken, the AEB setting will not becanceled automatically. To cancelAEB, follow steps 1 and 2 to set theAEB amount to “Z”.
• AEB will also be canceledautomatically if the flash is ready to fire.
AEB cannot be used with flash or bulb exposures.
70
jAE Lock★
AE lock enables you to lock the exposure at a different spot from thepoint of focus. After locking the exposure, you can recompose the shotwhile maintaining the desired exposure level. This feature is useful forbacklit and spotlighted subjects.
1 Focus the subject.• Press the shutter button halfway to
focus.sThe exposure setting will be
displayed.
2Press the <j> button. (0)sThe <j> icon will light in the
viewfinder to indicate that theexposure setting has been locked(AE lock).
• Each time you press the <j>button, it locks the current exposuresetting.
3 Compose the shot and take thepicture.• If you want to maintain the AE lock
while taking more pictures, hold downthe <j> button and press theshutter button to take another picture.
AE lock indicator
• In the One-Shot AF and AI Focus AF modes (except AI SERVO AF), AE lockwill take effect while you press the shutter button halfway to focus.
• AE lock works differently depending on the selected AF point and meteringmode. For details, see “AE Lock Effects” (p.92).
C.Fn-04-1 enables you to apply AE lock by pressing the shutter button halfwayand focus by pressing the <j> button. (p.85)
71
Bulb Exposures★
When bulb is set, the shutter is open while you keep pressing the shutterbutton fully. Bulb exposures are useful when long exposures are requiredfor night scenes, fireworks, astronomical photography, etc.
1 Turn the Mode Dial to <W>.
2Set the shutter speed to “y”.• Look at the LCD panel and turn the
<l> dial to select “y”.• “y” follows “K”
3 Select the desired aperture value.• Turn the <i> switch to <1> and
turn the <u> dial.
4Start the bulb exposure.sDuring the bulb exposure, “y”
blinks on the LCD panel.• The bulb exposure continues as long
as you hold down the shutter button.
• Remote Switch RS-60E3 (sold separately) is convenient for bulb exposures.• Bulb exposures are also possible with the Remote Controller RC-1/RC-5
(sold separately). When you press the transmit button, the exposure willstart. To end the exposure, press the button again.
• With a new set of batteries, the maximum bulb exposure time (at 20˚C) willbe about 10 hours.
72
4Multiple Exposures★
The film is not advanced after each shot, so you can expose multipleshots on the same frame. Shoot up to nine shots on a single frame.
1 Move the <7> arrow to the <4>icon.• Look at the LCD panel and press the
<0> button. (1)s“E” will be displayed.
2Set the desired number ofmultiple exposures.• Turn the <l> dial.• Press the shutter button halfway to
return to normal camera operation.
3 Take the picture.sAfter you take all the multiple
exposures, the film advances to thenext frame automatically and themultiple-exposure setting is canceled.
If you shoot multiple exposures on the first few or last few frames of a roll, themultiple exposures might not be precisely aligned due to the film curling.
• During multiple-exposure shooting, the <7> arrow next to the <4> icon onthe LCD panel will blink.
• To cancel multiple exposures before shooting, set the number of multipleexposures to “E”.
• To cancel multiple exposures after shooting, follow steps 1 and 2 to set thenumber of multiple exposures to blank.
• Since the same frame is exposed multiple times, exposure compensationshould be set to a negative value for each shot.
General Guide for Exposure CompensationThese are only suggested exposure compensation amounts. The optimumamount depends on the scene. Experiment to find the optimum compensationamount.
Multiple Exposures 2 exposures 3 exposures 4 exposuresExposure Compensation Amount –1.0 stop –1.5 stop –2.0 stop
73
HSelecting the Film Advance Mode★
The film advance mode can be set to Single <J> or Continuous <H>.
If the film is not DX-coded or if you want to set a different film speed,load the film in the camera and set the film speed manually as follows.The settable film speed range is ISO 6 to 6400.
D Setting the ISO Film Speed★
1 Move the <7> arrow to the<D> icon.• Look at the LCD panel and press the
<0> button to move the arrow.(1)
sThe current film speed is displayed.
2Set the desired film speed.• Turn the <l> dial to set the film
speed.• Press the shutter button halfway to
return to normal camera operation.
• To set the film advance mode, turnthe film advance mode lever.
• The film advance mode takes effectin the Creative Zone modes.
• The continuous shooting speed willbe as follows:
4 : Approx. 4 fps5 : Approx. 3.5 fps
With C.Fn-03-1, you can retain the manually-set film speed even after takingout the film and loading another DX-coded roll of film. (p.85)
The manually-set film speed will be canceled if the film is taken out and DX-coded film is loaded.
74
9Silencing the BeeperThe beeper can be silenced in all of the picture-taking modes.
1 Move the <7> arrow to the <9>icon.• Look at the LCD panel and press the
<0> button. (1)
2Set the setting to “W”.• Turn the <l> dial.• To enable the beeper to sound, set to
“E”.• Press the shutter button halfway to
return to normal camera operation.
LCD panel illumination is provided.Press the <b> button to illuminate theLCD panel for about 5 sec. Theillumination can be turned off bypressing the button again. Turn on theillumination when it is too dark to seeLCD panel. The illumination turns offautomatically after the picture is taken.
bLCD Panel Illumination
If you use any button or dial for shooting while the LCD panel is illuminated,the illumination time will be extended.
75
Mirror Lockup★
Mirror lockup is enabled with C.Fn-05-1. This prevents mirror-causedvibrations which may blur the image during close-ups or when atelephoto lens is used. To set this Custom Function, see “Setting aCustom Function” on page 84. When mirror lockup is set, the cameraoperates as follows.
1 Press the shutter button fully.sThe mirror will lock up.sAfter 30 seconds, it will go back down
automatically.
2Press the shutter button fullyagain.sThe picture will be taken and the
mirror will go back down.• To take another shot with mirror
lockup, start from step 1 again.
• If you are shooting a very bright scene such as the beach or ski slope withmirror lockup, take the picture promptly after the mirror goes up.
• During mirror lockup, do not point the lens toward the sun. Doing so maydamage the shutter curtains due to the sun’s heat.
• If you use mirror lockup with the self-timer for a bulb exposure, keep pressingthe shutter button completely (10-sec. self-timer + bulb exposure). If you letgo of the shutter button during the self-timer, there will be a shutter-releasesound. It is not the shutter release.
• For mirror lockup, using the Remote Switch RS-60E3 or Remote ControllerRC-1/RC-5 (both sold separately) is recommended.
• During mirror lockup, the film advance mode will be Single even if it is set to<H>.
• If mirror lockup is used with the self-timer, pressing the shutter button fullywill lock up the mirror first and the picture will be taken 10 sec. later.
76
KWireless Remote Control
Using the Remote Switch
With Remote Controller RC-1 (sold separately), wireless operation ispossible up to 5 m/16.4 ft away from the front of the camera.
1 Turn the film advance mode leverto <p>.sThe <K> icon appears on the LCD
panel.
Connect the Remote Switch RS-60E3’s (sold separately) plug to thecamera’s remote control terminal. Totake a picture, press the RemoteSwitch’s shutter-release button.
2 Take the picture.• Point the signal transmitter toward
the camera’s remote control sensorand press the signal button.
sThe remote control lamp will light,and the picture will be taken.
• For details on using the remotecontrol, see the RC-1’s instructions.
Remote controlsensor
Certain types of fluorescent light may cause camera misoperation. Duringwireless remote control, try to keep the camera away from fluorescent light.
• You can also use Remote Controller RC-5 (sold separately).• If you set the film advance mode lever to <p> and do nothing for four
minutes, the wireless remote control mode will be canceled automatically tosave battery power.
5Flash Photography
77
With the built-in flash or EOS-dedicated Speedlite, you caneasily take flash pictures in thesame way as normal AE shooting.In the Basic Zone modes (except<I> <P>), the built-in flash isfully automatic. In Creative Zonemodes, it can be used at any time.
78
Using the Built-in Flash
In low-light or backlit conditions, the built-in flash will pop up and fireautomatically (except in <I> <P> modes).
In a Basic Zone Mode
In a Creative Zone Mode
S : Use this mode for automatic flash photography. The flashsync speed (within 1/60 sec. - 1/125 sec) and aperture valuewill be set automatically as with the <Y> (Full Auto) mode.
R : Use this mode if you want to set the flash sync speedmanually (within 30 sec. - 1/125 sec.). The camera will set theflash aperture value automatically to obtain a correct flashexposure.
E : Use this mode if you want to set the flash aperture value.The camera will set the flash sync speed (within 30 sec. -1/125 sec.) automatically to obtain the best exposure for theaperture you set. For portraits with a night scene or darkbackground, a slow sync speed will be set to obtain a properexposure for both the subject and background. The flashilluminates the subject, while the background is properlyexposed with a slow shutter speed.• Because automatic slow-sync shooting uses a slow shutter
speed, always use a tripod.
W : Enables you to manually set the shutter speed (30 sec. -1/125 sec. or bulb) and aperture. The subject is properlyexposed with the flash and the background is exposed with theflash sync speed and aperture value you have set.
Q : This mode gives the same flash result as the <S> mode.
Just pop-up the built-in flash to fire the flash regardless of the ambientlight level.
79
• Use the built-in flash at least 1 meter (3.3 ft) away from the subject. Closerdistances may result in the flash partially obstructed by the lens barrel.
• When using the built-in flash, detach any hood attached to the lens. A lenshood will partially obstruct the flash coverage.
• When a super telephoto lens or a fast, large-aperture lens is attached, thebuilt-in flash coverage might be obstructed. Using an EOS-dedicatedSpeedlite is recommended.
• The built-in flash’s flash coverage is suited for a 28mm lens. If you use ashorter wide-angle lens, the flash picture may look dark along the periphery.
• To retract the built-in flash, push it down.• In <R> or <W> mode, even if you set the shutter speed faster than 1/125
sec. 1/125 sec. will be set automatically.• If the camera finds it difficult to focus, the AF-assist beam will fire
automatically (except <I> <P>).
• C.Fn-07-3 disables the built-in flash from firing. (p.86)• C.Fn-06-1 enables 2nd-curtain sync with the built-in flash. (p.86)• With C.Fn-09-1, the flash sync speed will be fixed at 1/125 sec. in the <E>
mode. (p.87)
Flash Distance Range (With EF28-105mm f/3.5-4.5) [m/ft]
ISO28mm 90mm
Negative Film Slide Film Negative Film Slide Film
100 1 - 5.2 / 3.3 - 17.2 1 - 3.7 / 3.3 - 12.1 1 - 4.0 / 3.3 - 13.4 1 - 2.8 / 3.3 - 9.4
200 1 - 7.4 / 3.3 - 24.3 1 - 5.2 / 3.3 - 17.2 1 - 5.7 / 3.3 - 18.9 1 - 4.0 / 3.3 - 13.4
400 1 - 10.5 / 3.3 - 34.4 1.2 - 7.4 / 3.9 - 24.3 1 - 8.1 / 3.3 - 26.8 1 - 5.7 / 3.3 - 18.9
80
Using the Built-in Flash
aFlash Exposure Compensation★
Flash exposure compensation can be set in the same way as withexposure compensation. It can be set up to +/–2 stops in 1/2-stopincrements.
1 Move the <7> arrow to the <a>icon on the LCD panel.• Press the <0> button to move
the arrow. (1)
2Set the flash exposurecompensation amount.• Turn the <i> switch to <1> and
turn the <u> dial.• To cancel flash exposure
compensation, set the amount backto <c>.
• Press the shutter button halfway toreturn to normal camera operation.
Re flash exposure index
Flash exposure level mark
Increased flash exposure
Decreased flash exposure
Decreased flashexposure
Increased flashexposure
3 Take the picture.
• The flash exposure compensation amount is retained even after the ModeDial is set to <2>.
• You can also set the compensation amount with the Main Dial.• Even with an EOS-dedicated Speedlite attached, you can still set the flash
exposure compensation with the camera as explained above.
81
Using an EOS-dedicated SpeedliteThe camera is compatible with the EX/EZ/E/EG/ML/TL-series EOS-dedicated Speedlites.For details on operating the Speedlite, refer to the Speedlite’sinstruction booklet.
Using an EX-series SpeedliteWith E-TTL II autoflash (AF point-linked,evaluative flash metering with preflash),you can easily take natural-looking flashpictures centering on the subject in thesame way as normal AE shooting.
With A-TTL/TTL autoflash (AF point-linked, off-the-film flash metering),you can easily take flash pictures in the same way as normal AEshooting.
Using an EZ/E/EG/ML/TL-series Speedlite
• Before attaching an external Speedlite, retract the built-in flash.• If you use a flash unit (with multiple contacts) dedicated to another camera
brand or a high-voltage flash, the camera may not work properly ormalfunction may result.
• If focus is difficult to achieve, the EOS-dedicated Speedlite (one with a built-in AF-assist light) will automatically emit the AF-assist light (except in <I><P> modes).
• With regard to EOS-dedicated Speedlites, this is a Type A camera(compatible with E-TTL II autoflash).
About E-TTL II AutoflashE-TTL II is a new autoflash exposure system incorporating improved flashexposure control and lens focusing distance information, making it moreprecise than the previous E-TTL (evaluative flash metering with preflash)system.The camera can execute E-TTL II autoflash with any EX-series Speedlite.
82
• C.Fn-07-3 can disable the EOS-dedicated Speedlite from firing a flash.(p.86)
• C.Fn-06-1 can set second-curtain flash synchronization for an EOS-dedicated Speedlite. (p.86)
• With C.Fn-09-1, the flash sync speed will be fixed at 1/125 sec. in the <E>mode. (p.87)
Using an EOS-dedicated Speedlite
6Custom Functions (C.Fn)
83
Custom Functions enable you tocustomize various camera featuresto suit your picture-takingpreferences.In the previous text, the <V>symbol was used to point outrelevant Custom Functions. In thischapter, all the Custom Functionsare described in detail.
• Custom Function settings are applied in the CreativeZone modes.They are not applied in the Basic Zonemodes.
84
GSetting a Custom Function
1 Turn the Mode Dial to <G>.sThe <V> icon and Custom
Function No. are displayed on theLCD panel.
2Select the Custom Function No.• Turn the <l> dial to select the
Custom Function No.
3 Set the Custom Function setting.• Press the <w> button. The
Custom Function setting changeseach time you press the button.
• The “W” setting is the default.• Repeat steps 2 and 3 above to set
any other Custom Functions.
4Finalize the setting.• Turn the Mode Dial to a shooting
mode.sThe <V> icon remains displayed
on the LCD panel and the CustomFunction setting is set.
“C.Fn” stands for Custom Function.
Custom FunctionSetting No.
FunctionSetting No.
85
Custom Function SettingsC.Fn-01 Film rewind speed
Increase the film rewind speed.0 : Normal (silent) rewind1 : High-speed rewind
C.Fn-02 Film leader position after film rewind
Prevent the film leader from being rewound in the film cartridge afterfilm rewind.0 : Rewinds film leader into the cartridge1 : Leaves film leader outside the cartridge
C.Fn-03 DX-coded film speed setting method
Prevent the camera from automatically setting the ISO film speedwhen the film is loaded.0 : Enabled1 : Disabled
C.Fn-04 Shutter button and <j> functions
0 : AF activation with shutter button pressed halfway, and AElock with the <j> button.
1 : AF activation with the <j> button, and AE lock with shutterbutton pressed halfway.Makes focusing and AE lock separate operations.
2 : AF activation with shutter button pressed halfway, andsuspend AF operation with the <j> button.During AI SERVO AF, if an obstruction comes in front of thesubject, you can press the <j> button to stop the AF operationmomentarily. The exposure is determined when the shot is taken.
86
Custom Function Settings
C.Fn-05 Mirror lockup
0 : Disabled (Normal operation)1 : Enabled
Effective for close-up and telephoto shots to prevent camera shakecaused by the mirror’s reflex action. See page 75 to use thisfeature.
C.Fn-06 Shutter curtain sync with built-in flash/EOS-dedicated Speedlite
0 : 1st-curtain sync1 : 2nd-curtain sync
With second-curtain sync and a slow shutter speed, you cancreate a light trail following a moving subject. The flash fires rightbefore the shutter closes. Second-curtain sync can be set evenwith EOS-dedicated Speedlites which cannot switch the shuttercurtain synchronization. The Speedlite with a shutter curtainsynchronization setting will override the camera’s setting.
C.Fn-07 AF-assist beam emission / Main flash firing
The AF-assist beam from the camera and the EOS-dedicatedSpeedlite can be enabled/disabled, and the flash from the camera andEOS-dedicated Speedlite can be enabled/disabled.0 : Enable AF-assist and flash1 : Disable AF-assist and enable flash2 : Enable AF-assist only with EOS Speedlite and enable flash3 : Enable AF-assist and disable flash
87
C.Fn-08 Partial metering linkage with AF point/FE lock
Partial metering and FE lock can be linked to the selected AF point.Effective for composing the shot.0 : Disabled (Partial metering/FE lock linked to center AF point)1 : Enabled
C.Fn-09 Flash sync speed in Av mode
0 : Auto1 : 1/125 sec. (fixed)
When you use flash in the aperture-priority mode (Av), the flashsync speed will be fixed at 1/125 sec. This prevents the camerafrom setting a slow sync speed in low-light conditions.
C.Fn-10 Superimposed display for focus confirmation
0 : On1 : Off
Disables the AF point from flashing in red when it achieves focus.When the AF point is selected, it will still flash in red.
C.Fn-11 AF point selection method
0 : <3> button + <h>1 : Select AF point manually with <h> or select automatically
with <3>While the metering is active (0), you can manually select the AFpoint with the <h> button. Convenient if you have to change theAF point often or if you want to change the AF point in the AISERVO AF mode.
2 : <3> button + <l> <u>After you press the <3> button, turn the <l> or <u> dial toselect the AF point. Turn the <l> dial to select a horizontal AFpoint or turn the <u> dial to select a vertical AF point.
88
C.Fn-12 Switch to center AF point with the <3> button
0 : Disabled1 : Enabled
Press the <3> button to immediately switch to the center AFpoint. Convenient if you often use the center AF point.
C.Fn-13 Lens AF stop button function
0 : AF stop1 : AF start
AF operates only while the AF stop button is pressed. While youpress the button, AF operation with the camera is disabled.
2 : AE lock while meteringWhen you press the button while metering timer is still active, AElock takes effect. Convenient when you want to focus and meterseparately.
3 : AF point selection method switching (between automatic andmanual).In the manual AF point selection mode, holding down the buttonswitches to automatic AF point selection. Holding down the buttonswitches from manual AF point selection to automatic AF pointselection immediately. Convenient when you are no longer able tofocus track a moving subject with a manually-selected AF point inthe AI Servo AF mode.In the automatic AF point selection mode, holding down the buttonselects the center AF point.
4 : AF mode switching (between One-Shot AF and AI Servo AF)In the One-Shot AF mode, holding down the button switches to AIServo AF mode. In the AI Servo AF mode, holding down the buttonswitches to One-Shot AF mode. Convenient when you need tokeep switching between One-Shot AF and AI Servo AF for asubject that keeps moving and stopping.
5 : IS startWith the lens’ IS switch already ON, the Image Stabilizer operatesonly while you hold down the AF stop button.
Custom Function Settings
The AF stop button is provided only on super telephoto lenses.
89
Reference
Basic Photography TermsAEAbbreviation for auto exposure. It is an automatic metering and exposuresystem that sets the optimum exposure (shutter speed and/or aperturevalue) based on the reading by the built-in exposure meter.
ExposureExposure occurs when the film is exposed to light. Correct exposure isobtained when the film is exposed to a proper amount of light inaccordance with the film’s sensitivity to light. The correct exposure isadjusted with the camera’s shutter speed and aperture.
Shutter speedThe shutter speed is the length of time the camera’s shutter opens toexpose the film to the light coming through the lens. The camera displaysthe shutter speed from “D” (1/4000 sec.) to “K” (30 sec.) and“y”.
Aperture valueThe aperture setting (f-number) indicatesthe size of the aperture opening in thelens. It is used to adjust the amount of lightstriking the film. The camera can displaythe aperture setting from “X” to “V”. Theactual aperture range displayed dependson the lens.
ISO film speedThe ISO film speed indicates the film’s sensitivity to light. The higher thefilm speed, the more sensitive the film is. Therefore, ISO 400 and higher-speed films are suited for low-light conditions. The ISO film speed is setin accordance with standards set by the International StandardizationOrganization (ISO). The camera can display the ISO film speed from “U”to “F”.
Basic Photography Terms
90
Depth of fieldThis is the range where acceptable focus can be achieved in front of andbehind the point of focus. The smaller the aperture value (the higher thef/number), the deeper the depth of field. And the larger the aperturevalue (the lower the f/number), the shallower the depth of field.
The depth of field is affected as described below:(1) A smaller aperture value (a higher f/number) increases the depth of
field.For example, stopping down to f/8 obtains a deeper depth of fieldthan f/4.5.
(2) A lens with a shorter focal length increases the depth of field.A wide-angle lens obtains a deeper depth of field than a telephotolens.
(3) A longer distance between the camera and subject increases thedepth of field.
(4) The depth of field behind the point of optimum focus (2) is longer thanthe depth of field in front of the point of optimum focus (1).
1 2
Depth of fieldPoint of optimum focus
Aperture set to f/2. Aperture set to f/22.
91
Feature Availability Table
Mode Dial mode
AF
Eye Control∗
Auto
Manual
Met
erin
g M
ode
Film
Adv
ance
Bui
lt-in
Fla
shF
unct
ions
AE Lock
Custom Functions
Exposure Compensation
Midroll Rewind
One-Shot
AF-Assist beam
Center-weighted avg.
Flash off
AF Point Selection
Evaluative
Partial
Single
Continuous
Self-timer
Auto Firing
Manual Firing
ISO Speed
Red-eye Reduction
Beeper
Multiple Exposures
Flash Exposure Compensation
AEB
AI Servo
AI Focus
●
●
●
●
●
◯
●
◯
◯
◯
●
●
◯
●
●
●
◯
●
◯
◯
◯
●
●
◯
●
●
●
◯
●
◯
◯
◯
●
●
◯
●
●
●
◯
●
◯
◯
◯
●
●
◯
●
●
◯
●
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
●
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
●
●
◯
●
●
◯
●
◯
◯
Y U O AI S R E QWP
: Set automatically. : User-selectable/settable. (p.48)
∗m Model only
Film AdvanceMode One-Shot AF AI Servo AF
J(Single frame)
H(Continuous)
AI Focus AF
92
AE Lock Effects
AF Mode and Film Advance Mode Combination
∗ If you use Eye Control AF and press the <j> button before you press theshutter button halfway, AE lock will be applied to the center AF point.
AF Point SelectionMethod
Metering Mode
Manual AF PointSelection / Eye Control
AE lock is set at theselected AF point.
AE lock is set at the AF pointwhich achieved focus.
AE lock is set at thecenter AF point.
AE lock is set at the center AF point.
AE lock is set at theselected AF point.∗
AE lock is set at thecenter AF point.
Automatic AF Point Selection
Z Evaluative
X Partial
C.Fn-08-0
C.Fn-08-1
C Center-weightedaveraging
The picture cannot betaken until focus isachieved. When focusis achieved, it alsolocks at the sametime. The evaluativemetering’s exposuresetting is also locked.(The exposure settingis retained until thepicture is taken.)
The same conditionsabove apply duringcontinuous shooting.(approx. 4 frames persec.)
The subject is focus-tracked for continuousautofocus. Theexposure is set whenthe picture is taken.
The same conditionsabove apply duringcontinuous shooting.(approx. 3.5 framesper sec.)
Automaticallyswitches betweenOne Shot AF and AIServo AF accordingto the subject status.
93
Program LineThe program line below applies when the camera is used in the <S>Program AE mode with an EF 28-105mm f/3.5-4.5 lens.
Aperture value
Shutter speed
: At 28mm focal length : At 105mm focal length
12
25
50
ISO 6
100
200
400
800
1600
3200
6400
5
4
3
2
1
0
–1
–2
–3
–4
–5
30 15 8 4 2 1 2 4 8 15 30 60 125 250 500 1000 2000 4000
32
22
16
11
8
5.6
4
2.8
2
1.4
1.0
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 f/No
Program Line DescriptionThe bottom horizontal axis represents the shutter speed and the rightvertical axis represents the aperture value. On the left edge and topedge of the graph, the Exposure Value (EV) is indicated for therespective shutter speed and aperture value combination set by theProgram AE mode and denoted by the program line.
Example: When the 105mm focal length is used and the subjectbrightness is EV 12, the point where the diagonal line from EV 12 (onthe top edge of the graph) intersects the program line indicates thecorresponding shutter speed (1/125 sec.) and aperture value (f/5.6)which the program sets automatically.The arrowhead lines above the graph indicate the metering range for therespective film speed.
94
Troubleshooting GuideIf there is a problem, first refer to this Troubleshooting Guide.
Nothing is displayed on the LCD panel.
The batteries are exhausted. / The batteries have been installedincorrectly.sReplace the batteries with new ones. / Install the batteries correctly.
(p.18)
The picture looks blurred.
The lens focus mode switch is set to <MF>.sSet the lens focus mode switch to <AF>. (p.20)
There was camera shake when the picture was taken.sHold the camera steady or use a faster shutter speed. (p.21)
The shutter does not work.
On the LCD panel, the frame count is not displayed and the <5>icon blinks.sTake out the film and load it correctly. (p.22)
The focus confirmation light <n> in the viewfinder blinks andfocus cannot be achieved.sSelect another AF point. (p.41)
If focus still cannot be achieved, focus manually. (p.51)
The <r> icon blinks on the LCD panel.
The battery level is very low.sReplace the batteries with new ones. (p.18)
A misoperation has occurred.sPress the shutter button halfway. (p.21) / Remove the batteries and
reload it. (p.18) If the blinking <r> icon does not turn off, consultyour nearest Canon dealer.
95
Major Specifications• TypeType....................................35 mm AF/AE SLR camera with built-in flashRecording media ................35 mm filmImage size..........................24 x 36 mmCompatible lenses..............Canon EF lenses (except EF-S lenses)Lens mount ........................Canon EF mount (electronic control)
• ViewfinderType....................................Eye-level pentaprismCoverage............................90% vertical and 92% horizontal coverageMagnification ......................0.7x (–1 diopter with 50mm lens at infinity)Eyepoint .............................19.5 mmDioptric adjustment range ...–2.5 - +0.5 diopterFocusing screen.................Fixed, all-matte screenMirror..................................Quick-return half mirror (Transmission:reflection ratio of
40:60, no mirror cut-off with EF 600mm f/4 or shorterlens)
Viewfinder information........AF (AF points, focus confirmation light, Eye Control∗);Exposure (shutter speed, aperture value, exposurelevel, AE lock); Flash (flash ready, red-eye reduction, hi-speed sync, FE lock, Flash Exposure Compensation)
Depth-of-field preview ........Depth-of-field preview button
• AutofocusType....................................TTL-CT-SIR with a CMOS sensor
(TTL secondary image-registration, phase detection)AF points ............................7AF working range ...............EV 1 - 18 (at 20˚C, ISO 100)Focusing modes.................One-Shot AF, AI Servo AF, AI Focus AF, Manual
focusing (MF)AF point selection...............Automatic selection, manual selection, manual
selection with Eye Control (Eye Control AF)∗Selected AF point display ...Superimposed in viewfinder and displayed on LCD
panel.AF-assist beam ..................Built-in flash fires intermittent burst automatically.
Effective range: Approx. 4.5 meters at center, Approx. 4meters at periphery.
• Eye Control∗Type....................................Eye position detected by IREDs.Calibration ..........................Up to five calibration settings can be stored (Intelligent
feature provided).
96
Major Specifications
• Exposure controlExposure metering modes...TTL full aperture metering with 35-zone SPC
• Evaluative metering (linkable to any AF point)• Partial metering (approx. 10% of viewfinder at center)• Center-weighted average metering
Metering range ...................EV 1 - 20 (normal temperature, 50mm f/1.4, ISO 100)Exposure control ................Program AE (Full Auto, Portrait, Landscape, Close-up,
Sports, Night Portrait, Program), shutter-priority AE,aperture-priority AE, depth-of-field AE, manualexposure, E-TTL II/A-TTL/TTL autoflash
Film speeds........................ISO 6 - 6400 (Set automatically for DX-coded film withinISO 25 - 5000)
Exposure compensation.....Manual exposure compensation: ±2 stops in 1/2-stopincrements (can be used with AEB)Auto Exposure Bracketing (AEB): ±2 stops in 1/2-stopincrements
AE lock ...............................Auto AE lock: In One-Shot AF mode, AE lock appliedwhen focus achieved.Manual AE lock: AE lock applied with AE lock button.
Multiple exposures .............Max. 9 exposures
• ShutterType....................................Electronically controlled focal-plane shutterShutter speeds ...................1/4000 - 30 sec. in 1/2-stop increments, bulb, X sync at
1/125 sec.Shutter release...................Soft touch electromagnetic releaseSelf-timer............................Shoot after 10 sec. delayRemote control...................Remote Switch RS-60E3,
Remote Controller RC-1/RC-5
• Built-in FlashType....................................Retractable, auto pop-up flashFlash metering system.......AF point-linked, 3-zone TTL autoflashGuide No. ...........................13 (ISO 100, meters), 43 (ISO 100, ft.)Recycling time....................Approx. 2 sec.Flash-ready indicator..........Flash-ready icon lights in viewfinderFlash coverage...................28mm lens angle coveredFiring preconditions............In Basic Zones (except Landscape and Sports):
Auto pop-up and firing in low light and backlit conditionsin daylight.
Red-eye Reduction.............LampFlash exposure compensation...±2 stops in 1/2-stop increments.
97
• External Speedlite..........E-TTL II/A-TTL/TTL autoflash with EOS-dedicatedSpeedlites
• Film transportFilm loading........................Automatic advance to frame 1.Film advance modes ..........Single-frame / continuous shooting / Self-timer/Remote
controlContinuous shooting speeds...One Shot AF: Max. 4 fps
AI Servo AF: Max. 3.5 fpsFrame counter ....................Counts upFilm rewind.........................Automatic. Mid-roll rewindFilm rewind time .................Silent: Approx. 13 sec., High-speed: Approx. 5 sec. (24-
ex. film)• Date imprinting (DATE Mode only)Automatic dating.................Up to Dec. 31, 2019Imprinting format ................Month, day, year; Day, month, year;Year, month, day;
Day, hour, min.; or blankImprinting color...................OrangePower source .....................One CR2025 lithium battery
• Customize Function.......13 Custom Functions with 34 settings
• Power SourceBattery................................Two CR123A (or DL123A) lithium batteriesBattery check .....................Auto (4-level indicator)Battery life ..........................
• With 24-ex. film. Figures in parentheses apply whenEye Control AF is turned on.
LCD Panel illumination .......Provided
• Dimensions and WeightDimensions (W x H x D).....146.7 x 103 x 69 mm / 5.78 x 4.06 x 2.72 in.Weight (body only) .............Eye Control/DATE model: 585 g / 20.6 oz
Eye Control/Non-DATE model: 580 g / 20.5 ozNon-Eye Control/Non-DATE model: 575 g / 20.3 oz
• All the specifications above are based on Canon’s testing and measuringstandards.
• Specifications and external appearance are subject to change without notice.• Asterisked items apply to Eye Control models only.
Temperature 0% Flash Use 50% Flash Use 100% Flash Use
At 20˚C 125 (115) rolls 38 (33) rolls 19 (17) rolls
At –20˚C 70 (65) rolls 20 (19) rolls 10 (9) rolls
98
IndexA
AE .....................................................89AE Lock.......................................70, 92AEB...................................................68AF Mode ...........................................38AF Mode Dial ....................................15AF Point ............................................41AF point selection key.......................16AF-Assist Beam ................................29AI Focus AF ......................................40AI Servo AF.......................................39Aperture value...................................89Attaching the Strap ...........................17A-TTL/TTL autoflash .........................81Automatic Selection ..........................42Av ......................................................58
B
Basic Photography Terms .................89Basic zone.........................................14Batteries ............................................18Battery Life........................................19Beeper...............................................74Built-in flash ......................................78Bulb Exposures.................................71
C
C.Fn ..................................................83CAL ...................................................43Calibration Procedure .......................43Center-weighted averaging metering...52Checking the Battery Level ...............19Close-up............................................30Continuous shooting ........................73Creative zone ....................................14Custom Functions .............................83
D
Date/Time..........................................35DEP...................................................62Depth-of-field ..............................59, 90Dioptric Adjustment...........................25
E
E-TTL II autoflash .............................81Evaluative metering...........................52Exposure ...........................................89Exposure Compensation...................67External flash ....................................81Eye Control .................................43, 48Eye Control Switch............................15Eyecup ........................................25, 34Eyepiece Cover.................................34
F
Film ...................................................22Film Advance Mode ..........................73Film advance mode lever ..................15Flash Exposure Compensation.........80Focus confirmation light ....................13Focus lock .........................................50Full Auto ............................................28Function ............................................11Function Availability Table .................91
H
Handling Cautions...............................6Holding the Camera ..........................26
I
Image zone .......................................14ISO film speed ............................73, 89ISO Speed ..................................73, 89
L
Landscape.........................................30LCD Panel.....................................7, 12LCD Panel Illumination......................74Lens ..................................................20
M
M (Manual) ........................................60Main Dial ...........................................16Major Specifications..........................95Manual Focusing...............................51
99
Manual Selection...............................42Metering Modes ................................52MF...............................................20, 51Midroll Rewind...................................24Mirror Lockup ....................................75Mode Dial ..........................................14Multiple exposures ............................72
N
Night Portrait .....................................31Nomenclature....................................10
O
One-Shot AF .....................................39
P
P (Program).......................................54Partial metering.................................52Portrait...............................................30Predictive AF.....................................40Program AE.......................................54Program Line.....................................93Program Shift ....................................55
Q
Quick Control Dial .............................16Quick Start Guide................................8
R
Red-eye Reduction ...........................32Remote Controller .............................76Remote Switch..................................76Replacing the Date Battery...............36
S
Self-timer...........................................33Shooting modes ................................14Shutter Button
Halfway pressing ............................21Full pressing...................................21
Shutter speed....................................89Single-frame shooting .......................73Speedlite .....................................78, 81Sports................................................31
T
Tv ......................................................56
V
Viewfinder .........................................13
W
Wireless Remote Control ..................76
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Thisdevice may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If suchchanges or modifications should be made, you could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Consult the dealer or an experienced radio/TV technician for help.
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as setout in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry Canada.
PRINTED IN TAIWAN© CANON INC. 2003CT1-1265-000
This Instruction booklet is current as of December 2003. For information onusing the camera with system accessories introduced after this date, contactyour nearest Canon Service Center.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A. CANON U.S.A. INC.For all inquiries concerning this camera, call toll free in the U.S.1-800-OK-CANON or write to: Customer Relations, Canon U.S.A., Inc.One Canon Plaza, Lake Success, N.Y. 11042-1198
CANADA CANON CANADA INC. HEADQUARTERS6390 Dixie Road, Mississauga, Ontario L5T 1P7, CanadaCANON CANADA INC. MONTREAL BRANCH5990, Côte-de-Liesse, Montréal Québec H4T 1V7, CanadaCANON CANADA INC. CALGARY OFFICE2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, CanadaFor all inquiries concerning this camera, call toll free in Canada1-800-OK-CANON
EUROPE, CANON EUROPA N.V.AFRICA & Bovenkerkerweg 59-61, P.O. Box 2262, 1180 EG Amstelveen, MIDDLE EAST The Netherlands
CANON COMMUNICATION & IMAGE FRANCE S.A.102, Avenue du Général de Gaulle 92257 La Garenne-Colombes Cedex, FranceCANON UK LTD.Woodhatch Reigate Surrey RH2 8BF, United KingdomCANON DEUTSCHLAND GmbHEuropark Fichtenhain A10, 47807 Krefeld, GermanyCANON ITALIA S.p.A.Via Milano 8 I-20097 San Donato Milanese, Milano, ItalyCANON Schweiz AGGeschäftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, SwitzerlandCANON G. m. b. H.Oberlaaerstrasse 233, 4th floor, 1100 Wien, AustriaCANON España, S. A.C/Joaquín Costa, 41, 28002 Madrid, SpainSEQUE Soc. Nac. de Equip., Lda.,Praça da Alegria, 58, 2°, 1269-149 Lisboa, Portugal
CENTRAL & CANON LATIN AMERICA, INC. DEPTO DE VENTASSOUTH AMERICA 703 Waterford Way Suite 400 Miami, FL 33126 U.S.A.
CANON LATIN AMERICA, INC. CENTRO DE SERVICIO Y REPARACIONApartado 2019, Zona Libre de Colón, República de Panamá
ASIA CANON HONGKONG CO., LTD.9/F, The Hong Kong Club Building, 3A Chater Road, Central, Hong KongCANON SINGAPORE PTE. LTD.79 Anson Road #09-01/06 Singapore 079906
OCEANIA CANON AUSTRALIA PTY. LTD.1 Thomas Holt Drive, North Ryde, N.S.W. 2113, AustraliaCANON NEW ZEALAND LTD.Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
JAPAN CANON SALES CO., INC.16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan