Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Instrumentation Division
Jones Engineering Group is in business for over 120 years and are currently working in
Ireland, UK, Europe and the Middle East
Saudi Arabia Limited Qatar Limited Technology Providers
BioEnergyInternational
UK
Jones Engineering through its subsidiary Douglas Calibration Services Ltd. (DCS) provides a full range of Instrumentation services.
Industries served: Pharmaceutical Food & BeverageBiotech HealthcarePetrochemical Water/UtilitiesEnergy Manufacturing/IndustrialMedical Devices Semi-conductor
01
Instrumentation Division Overview
•••••
•••••
Saudi Arabia Limited Qatar Limited Technology Providers
BioEnergyInternational
UK
02
Services
Instrument Procurement and Installation
In-house and Satellite Calibration Laboratories
Bench Calibrations
Specifications Verification
Data Logging & Temperature Profiling
Preventative Maintenance Support
Loop Checking
ATEX Inspections
Test Equipment Certification
Plant Start-Up Assistance
Portable Appliance Testing
Flow Measuring
Shut Down Support
Turnarounds
On-Site / Field Calibrations
Test Equipment Asset Management
•
•
•
•
•
•
•
• •
•
• • • •
• •
03
ATEX / Calibration
ATEXATEX inspection and Installationservices for potentially explosiveatmospheres. We have trainedinspectors who can carry out yourinitial visual and detailed inspectionsprior to start-up on existing installations or after modification works to achieve ATEX compliance for our clients. We can also provide assistance with the preparation and calculations for the generation of your DSD’s (Descriptive System Documents) for all Intrinsically Safe loops.
Calibration LabsFrom our calibration laboratory we can offer our clients calibration solutions which are supported by a proven ISO 9001:2008 Quality Management System. This provides our clients with the knowledge and assurance that all calibrations performed are completed to the highest standard by technically competent technicians using approved procedures and certified traceable test equipment. All test equipment is cross-checked on a quarterly basis to maintain a high level of confidence in the calibration reports generated.
Selection of our Industrial Projects
04
Eli Lilly Shell
Conoco PhilipsPfizer
Centocor Merck Sharp & Dohme
05
ESB Bord Gais
Kinsale Energy
Diageo Biomarin
Conoco Philips
TemperatureRange -80°C to 350°C. Sensors (RTD / TC), Transmitters, Switches, Indicators /Gauges & Digital Handheld Indicators
Temperature Mapping/Validation Range-196°C to 350°C / 5% to 95% rH Refrigerators & Freezers (both front load & walk-in), Autoclaves, Incubators & Ovens, Stability Rooms, Chambers, SIP / TFF skids, Media Lines and Reactor Vessels, Furnaces, Cold Stores, Rooms & Warehouse Facilities
PressureRange -0.95 Bar to 550 Bar Transmitters, Indicators/Gauges, Switches, Magnehelics & Relief Valves
FlowRange 0.2 Kg/min to 1750Kg/min. Any area including hazardous & hygienic for Positive Displacement,Turbine, Electromagnetic, Coriolis, Vortex & DP Orifice Plate
MassRange OIML class M1 and F1 weights 0 to 2000 KG. Weigh Systems, Load Cells, Floor Scales, Platform Weighers, Laboratory Balances, Check Weighers
Scope of Measurements & Capabilties
06
07
Mechanical/Dimensional Measurement Range 0 to 3000mm Micrometers, Callipers, Depth Gauges & Torque Wrenches
Analytical Range 0 to 14pH, 1 to 500,000 microsiemens, 124 to 650mV redox, ph, Conductivity, Resistivity & Redox Monitoring and Controlling Systems
Speed/VelocityRange 0 to 60’000 rpm Agitators, Conveyors & Pumps
HumidityRange 5% to 95% rH Transmitters, Hand Held Indicators & Data Loggers
TimeTiming Devices Range minimum 1 second. Controllers, PLC activities & General Timing Devices
ATEX Inspection Services COMPEX Trained Inspectors, Visual, Close & Detailed Inspections, Assistance with EPD & DSD Calculations and Support Documentation, Planned Periodic Maintenance & Inspection Schedules
Selection of our Clients
08
• Air Products• Bord Gais• Esso• Aughinish Alumina• Conoco Phillips• GAMA Power Stations• Shell• Top• Siemens• Eli Lilly• Diageo• Elan
• Texaco• Fluor• Jacobs• BOC• PM Group• Loughwood Greene• Marathon• Endesa• Johnson & Johnson• Merck Sharp & Dohme• GlaxoSmithKline
“Quality work through quality people”
We have over 1,800 employees working worldwide
Douglas Calibration Services Ltd.
Euro Business Park,Little Island,Cork.
Tel: +353 (0) 21 4510700
Head OfficeDublin, IrelandTel: +353 (0)1 6711500
Damastown Office, IrelandTel: +353 (0)1 8697100
London Office, United Kingdom+44 207 242 1706
Riyadh Office, Kingdom of Saudi ArabiaTel: +966 121 505 28
Jeddah Office, Kingdom of Saudi ArabiaTel: +966 504 586 259
For office locations see www.joneseng.com
Doha Office, Qatar Tel: +974 448 067 97
Al Khobar Office,Kingdom of Saudi ArabiaTel: +966 54 111 3901
Office Locations
Working Internationally
joneseng.com