Embed Size (px)
Citation preview
continuedInsulated Sill-Thresholds
830A, B, CH, PG
844A, B
825A, B
4 9 /16
1/81
3 1/ 2
1 3/ 8
3 1/ 2
1/81
Components:HARDWOOD TRIM - Stapled, replaceable.HARDWOOD CAP - has maximum cross section (over 11/16”) to resist bending and deflection, Adjustable from 1-1/8” to 1-3/8” in height or 1-3/8” to 1-5/8”.
FASTENERS - color coated zinc plated steel fastener engages in zinc plated steel, rivet-type T-nut. T-nut is locked into substrate by a flaring operation.SANTOPRENE ® By Monsanto - dual durometer rubber seal retains memory for a better, longer lasting seal.LEG VINYL - provides additional moisture barrier.SUBSTRATE - Selected products use a dimensionally stable wood product or stable composite material product.SIZES - Up to 144” length (1-1/8” high only).
ADJUSTABLE HARDWOOD THRESHOLDSCOMPOSITE & WOOD SUBSTRATE AVAILABLE
o 5 slope
o 5 slope
o 5 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 PRODUCTS ARE SHOWN ACTUAL SIZE 28
continuedInsulated Sill-Thresholds
849 A, B, PG
THIS DRAWING NOT TO SCALE
1 3/8
7 11 / 16
Now wi th composi te subst ra te !
827B, S
847B, S
4 9/ 16
1 1/4
1 1/4
4 9/ 16
ADJUSTABLE ALL ALUMINUM THRESHOLDS
3 1/ 2
1 1/4
COMPOSITE OR WOOD SUBSTRATE AVAILABLEAdjustable from 1-1/4” to 1-1/2” in height.
5
856B, S
o 5 slope
o 5 slope
o 5 slope
o 5 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 30
Available extenders shown on page 31.
Section 6 INSULATED SILL THRESHOLDS
THIS DRAWING NOT TO SCALE7 11 / 16
1/81
823A, B, PG
4 9/ 16
1/81
820A, B, CH, PG
822A, B,
1/81
5 5/ 8
FIXED HARDWOOD THRESHOLDSCOMPOSITE OR WOOD SUBSTRATE AVAILABLE
o 5 slope
o 5 slope
o 5 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)25
55/8
1 1/4
ADJUSTABLE FROM 1-3/8” TO 1-5/8”
1 1/4
7 11/16
1 3/8
5 5/8
1 3/8
7 11/16
757
777
continuedInsulated Sill-Thresholds
857B, CH, S
877B, CH, S
A, B
A, B
o 5 slope
o 5 slope
o 5 slope
o 5 slope
THIS DRAWING NOT TO SCALE
THIS DRAWING NOT TO SCALE
COMPOSITE CAP / ALUMINUM BODY ADJUSTABLE thresholds designed as a thermal-break.Height adjusts from 1-3/8" to 1-5/8" (1/4").
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)31
757A, B
777A, B
836 2”B, S
846 3”B, S
B, S
EXTENDERS Only for use with parts # 820, 830, 840, 841, & 850.
A, B, CH, PG, W
EXTENDERS Only for use with parts # 542, 822, 835, 842, 845, 847, 852, & 947.
834 1”
832 1”
A, B, CH, PG, W853 3”
A, B, CH, PG, W831 2”
continuedInsulated Sill-Thresholds
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558PRODUCTS ARE SHOWN ACTUAL SIZE33
THIS DRAWING NOT TO SCALE7 11/16
1 3/8
977B, CH, S
o 5 slope
THIS DRAWING NOT TO SCALE7
1/41
7/16
Section 7 OUT-SWING DOOR THRESHOLDS
5
1/41
7/16
PLEASE NOTE:“Outswing” Astra-Bolt on page 52
HARDWOOD & ALUMINUM OUTSWING
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)35
o 4 slope
o 4 slope
5 7/16
1/41
415 A, B, CH
ALL ALUMINUM OUTSWING
Wood substrate only.o4 slope
412 A, B, CH
410 A, B, CH
and specified lengths are cut exact.Center holes are counter-sunk.#10 phillips flathead screws ofappropriate length are included. Indicates location of standard fastener hole.
Special anchors may be requiredon concrete slab constructionand are available at extra cost,(see page 54).Standard bumper seal isSantoprene (#9032T).Optional seals (see page 55).
Standard Sizes (Product is cutoversize to allow “cutting in”): 30”,32”, 36”, 42”, 48” (cut 3/8” over);60”, 64”, 72” (cut 1” over).Other lengths are available.(Extra cost over 73”)Routed thresholds (page 18)
For glue-down or nail-on applications.
For glue-down or nail-on applications.
Full length insert for glue-down or nail-on applications.
16
51
52
49
44
42
34
14
continuedInsulated Sill-Thresholds
7 11 / 16
1/81
5 5/ 8
1 3/ 8
845A, B
5 5/ 8
1/81
835A, B
840A, B, CH. PG
4 9/ 16
1 3/ 8
839 A, B, PG
o 5 slope
o 5 slope
o 5 slope
o 5 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)29
THIS DRAWING NOT TO SCALE
55/8
1 1/4
ADJUSTABLE FROM 1-3/8” TO 1-5/8”
1 1/4
7 11/16
1 3/8
5 5/8
1 3/8
7 11/16
757
777
continuedInsulated Sill-Thresholds
857B, CH, S
877B, CH, S
A, B
A, B
o 5 slope
o 5 slope
o 5 slope
o 5 slope
THIS DRAWING NOT TO SCALE
THIS DRAWING NOT TO SCALE
COMPOSITE CAP / ALUMINUM BODY ADJUSTABLE thresholds designed as a thermal-break.Height adjusts from 1-3/8" to 1-5/8" (1/4").
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)31
55/8
1 1/4
ADJUSTABLE FROM 1-3/8” TO 1-5/8”
1 1/4
7 11/16
1 3/8
5 5/8
1 3/8
7 11/16
757
777
continuedInsulated Sill-Thresholds
857B, CH, S
877B, CH, S
A, B
A, B
o 5 slope
o 5 slope
o 5 slope
o 5 slope
THIS DRAWING NOT TO SCALE
THIS DRAWING NOT TO SCALE
COMPOSITE CAP / ALUMINUM BODY ADJUSTABLE thresholds designed as a thermal-break.Height adjusts from 1-3/8" to 1-5/8" (1/4").
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)31
Available extenders shown on page 31.
continuedInsulated Sill-Thresholds
849 A, B, PG
THIS DRAWING NOT TO SCALE
1 3/8
7 11 / 16
Now wi th composi te subst ra te !
827B, S
847B, S
4 9/ 16
1 1/4
1 1/4
4 9/ 16
ADJUSTABLE ALL ALUMINUM THRESHOLDS
3 1/ 2
1 1/4
COMPOSITE OR WOOD SUBSTRATE AVAILABLEAdjustable from 1-1/4” to 1-1/2” in height.
5
856B, S
o 5 slope
o 5 slope
o 5 slope
o 5 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 30
continuedInsulated Sill-Thresholds
849 A, B, PG
THIS DRAWING NOT TO SCALE
1 3/8
7 11 / 16
Now wi th composi te subst ra te !
827B, S
847B, S
4 9/ 16
1 1/4
1 1/4
4 9/ 16
ADJUSTABLE ALL ALUMINUM THRESHOLDS
3 1/ 2
1 1/4
COMPOSITE OR WOOD SUBSTRATE AVAILABLEAdjustable from 1-1/4” to 1-1/2” in height.
5
856B, S
o 5 slope
o 5 slope
o 5 slope
o 5 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 30
continuedInsulated Sill-Thresholds
849 A, B, PG
THIS DRAWING NOT TO SCALE
1 3/8
7 11 / 16
Now wi th composi te subst ra te !
827B, S
847B, S
4 9/ 16
1 1/4
1 1/4
4 9/ 16
ADJUSTABLE ALL ALUMINUM THRESHOLDS
3 1/ 2
1 1/4
COMPOSITE OR WOOD SUBSTRATE AVAILABLEAdjustable from 1-1/4” to 1-1/2” in height.
5
856B, S
o 5 slope
o 5 slope
o 5 slope
o 5 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 30
A,B
A,B,CH
A,B,CH
A,B
3727
3747
3757
3777
For 3-1/2”ThresholdsFor 3-1/2”Thresholds
For 4-9/16”Thresholds
For 5-5/8”Thresholds
For 7-11/16”Thresholds
THIS DRAWING NOT TO SCALE
RE-USABLE PVC PROTECTIVE COVERS
continuedInsulated Sill-Thresholds
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 34
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
423
428
424
Full length insert for glue-down or nail-on applications.
A,B
A,B
A,B
Lowbumperthreshold.10x1½”phillipsflatheadscrewsareincluded.
Extrahighbumperthreshold.10x2”phillipsflatheadscrewsareincluded.
Widebumperthresholdwithvinylmoisturebarrier.10x2”phillipsflatheadscrewsareincluded.
DISCONTINUED - Available while supplies last.
3727
3747
3757
3777
For 3-1/2”ThresholdsFor 3-1/2”Thresholds
For 4-9/16”Thresholds
For 5-5/8”Thresholds
For 7-11/16”Thresholds
THIS DRAWING NOT TO SCALE
RE-USABLE PVC PROTECTIVE COVERS
continuedInsulated Sill-Thresholds
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 34
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
423
428
424
Full length insert for glue-down or nail-on applications.
A,B
A,B
A,B
Lowbumperthreshold.10x1½”phillipsflatheadscrewsareincluded.
Extrahighbumperthreshold.10x2”phillipsflatheadscrewsareincluded.
Widebumperthresholdwithvinylmoisturebarrier.10x2”phillipsflatheadscrewsareincluded.
DISCONTINUED - Available while supplies last.
THIS DRAWING NOT TO SCALE7
1/41
7/16
Section 7 OUT-SWING DOOR THRESHOLDS
5
1/41
7/16
PLEASE NOTE:“Outswing” Astra-Bolt on page 52
HARDWOOD & ALUMINUM OUTSWING
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)35
o 4 slope
o 4 slope
5 7/16
1/41
415 A, B, CH
ALL ALUMINUM OUTSWING
Wood substrate only.o4 slope
412 A, B, CH
410 A, B, CH
and specified lengths are cut exact.Center holes are counter-sunk.#10 phillips flathead screws ofappropriate length are included. Indicates location of standard fastener hole.
Special anchors may be requiredon concrete slab constructionand are available at extra cost,(see page 54).Standard bumper seal isSantoprene (#9032T).Optional seals (see page 55).
Standard Sizes (Product is cutoversize to allow “cutting in”): 30”,32”, 36”, 42”, 48” (cut 3/8” over);60”, 64”, 72” (cut 1” over).Other lengths are available.(Extra cost over 73”)Routed thresholds (page 18)
continuedOut-swing Door Thresholds
Indicates location of standard fastener hole.
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)37
continuedOut-swing Door Thresholds
Indicates location of standard fastener hole.
3111 A, B,1/2” Elevator for increasingheight of saddle thresholds.
1/2
5
5/8
5/8
Floor coveringarea.
5
5/8
5/8
5
5/8
5/8
472 A, BBumper thresholdwill allow for floorcovering.
471 A, BBumper threshold forcontinuous level floor.
10 x 1-1/2” phillipsflathead screws areincluded.
10 x 1-1/2” phillipsflathead screws areincluded.
470 A, BBumper threshold.
10 x 1-1/2” phillipsflathead screws areincluded.
ELEVATORS
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 PRODUCTS ARE SHOWN ACTUAL SIZE 38
continuedOut-swing Door Thresholds
Indicates location of standard fastener hole.
3111 A, B,1/2” Elevator for increasingheight of saddle thresholds.
1/2
5
5/8
5/8
Floor coveringarea.
5
5/8
5/8
5
5/8
5/8
472 A, BBumper thresholdwill allow for floorcovering.
471 A, BBumper threshold forcontinuous level floor.
10 x 1-1/2” phillipsflathead screws areincluded.
10 x 1-1/2” phillipsflathead screws areincluded.
470 A, BBumper threshold.
10 x 1-1/2” phillipsflathead screws areincluded.
ELEVATORS
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 PRODUCTS ARE SHOWN ACTUAL SIZE 38
3105 A,B
1/41/4”Elevatorforincreasingheightofsaddlethresholds.
THIS DRAWING NOT TO SCALE7
1/41
7/16
Section 7 OUT-SWING DOOR THRESHOLDS
5
1/41
7/16
PLEASE NOTE:“Outswing” Astra-Bolt on page 52
HARDWOOD & ALUMINUM OUTSWING
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)35
o 4 slope
o 4 slope
5 7/16
1/41
415 A, B, CH
ALL ALUMINUM OUTSWING
Wood substrate only.o4 slope
412 A, B, CH
410 A, B, CH
and specified lengths are cut exact.Center holes are counter-sunk.#10 phillips flathead screws ofappropriate length are included. Indicates location of standard fastener hole.
Special anchors may be requiredon concrete slab constructionand are available at extra cost,(see page 54).Standard bumper seal isSantoprene (#9032T).Optional seals (see page 55).
Standard Sizes (Product is cutoversize to allow “cutting in”): 30”,32”, 36”, 42”, 48” (cut 3/8” over);60”, 64”, 72” (cut 1” over).Other lengths are available.(Extra cost over 73”)Routed thresholds (page 18)
continuedOut-swing Door Thresholds
Indicates location of standard fastener hole.
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)37
continuedOut-swing Door Thresholds
Indicates location of standard fastener hole.
3111 A, B,1/2” Elevator for increasingheight of saddle thresholds.
1/2
5
5/8
5/8
Floor coveringarea.
5
5/8
5/8
5
5/8
5/8
472 A, BBumper thresholdwill allow for floorcovering.
471 A, BBumper threshold forcontinuous level floor.
10 x 1-1/2” phillipsflathead screws areincluded.
10 x 1-1/2” phillipsflathead screws areincluded.
470 A, BBumper threshold.
10 x 1-1/2” phillipsflathead screws areincluded.
ELEVATORS
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 PRODUCTS ARE SHOWN ACTUAL SIZE 38
continuedOut-swing Door Thresholds
Indicates location of standard fastener hole.
3111 A, B,1/2” Elevator for increasingheight of saddle thresholds.
1/2
5
5/8
5/8
Floor coveringarea.
5
5/8
5/8
5
5/8
5/8
472 A, BBumper thresholdwill allow for floorcovering.
471 A, BBumper threshold forcontinuous level floor.
10 x 1-1/2” phillipsflathead screws areincluded.
10 x 1-1/2” phillipsflathead screws areincluded.
470 A, BBumper threshold.
10 x 1-1/2” phillipsflathead screws areincluded.
ELEVATORS
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 PRODUCTS ARE SHOWN ACTUAL SIZE 38
3105 A,B
1/41/4”Elevatorforincreasingheightofsaddlethresholds.
THIS DRAWING NOT TO SCALE7
1/41
7/16
Section 7 OUT-SWING DOOR THRESHOLDS
5
1/41
7/16
PLEASE NOTE:“Outswing” Astra-Bolt on page 52
HARDWOOD & ALUMINUM OUTSWING
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)35
o 4 slope
o 4 slope
5 7/16
1/41
415 A, B, CH
ALL ALUMINUM OUTSWING
Wood substrate only.o4 slope
412 A, B, CH
410 A, B, CH
and specified lengths are cut exact.Center holes are counter-sunk.#10 phillips flathead screws ofappropriate length are included. Indicates location of standard fastener hole.
Special anchors may be requiredon concrete slab constructionand are available at extra cost,(see page 54).Standard bumper seal isSantoprene (#9032T).Optional seals (see page 55).
Standard Sizes (Product is cutoversize to allow “cutting in”): 30”,32”, 36”, 42”, 48” (cut 3/8” over);60”, 64”, 72” (cut 1” over).Other lengths are available.(Extra cost over 73”)Routed thresholds (page 18)
continuedOut-swing Door Thresholds
Indicates location of standard fastener hole.
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)37
continuedOut-swing Door Thresholds
Indicates location of standard fastener hole.
3111 A, B,1/2” Elevator for increasingheight of saddle thresholds.
1/2
5
5/8
5/8
Floor coveringarea.
5
5/8
5/8
5
5/8
5/8
472 A, BBumper thresholdwill allow for floorcovering.
471 A, BBumper threshold forcontinuous level floor.
10 x 1-1/2” phillipsflathead screws areincluded.
10 x 1-1/2” phillipsflathead screws areincluded.
470 A, BBumper threshold.
10 x 1-1/2” phillipsflathead screws areincluded.
ELEVATORS
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 PRODUCTS ARE SHOWN ACTUAL SIZE 38
continuedOut-swing Door Thresholds
Indicates location of standard fastener hole.
3111 A, B,1/2” Elevator for increasingheight of saddle thresholds.
1/2
5
5/8
5/8
Floor coveringarea.
5
5/8
5/8
5
5/8
5/8
472 A, BBumper thresholdwill allow for floorcovering.
471 A, BBumper threshold forcontinuous level floor.
10 x 1-1/2” phillipsflathead screws areincluded.
10 x 1-1/2” phillipsflathead screws areincluded.
470 A, BBumper threshold.
10 x 1-1/2” phillipsflathead screws areincluded.
ELEVATORS
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 PRODUCTS ARE SHOWN ACTUAL SIZE 38
3105 A,B
1/41/4”Elevatorforincreasingheightofsaddlethresholds.
3727
3747
3757
3777
For 3-1/2”ThresholdsFor 3-1/2”Thresholds
For 4-9/16”Thresholds
For 5-5/8”Thresholds
For 7-11/16”Thresholds
THIS DRAWING NOT TO SCALE
RE-USABLE PVC PROTECTIVE COVERS
continuedInsulated Sill-Thresholds
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 34
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
THIS DRAWING NOT TO SCALE7 7/16
1/41
417 A, B, CH
continuedOut-swing Door Thresholds
Wood orCompositesubstrate.
o4 slope
COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558
PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 36
428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.
2 1/4
1/81
424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 2” phillips flathead screws are included.
424*A, B, Low bumper threshold. .10 x 1-1/2” phillips flathead screws are included.
3 7/16
3/4
* DISCONTINUED - Available While Supplies Last2 1/4
5/8
OUTSWING BUMPER THRESHOLDS
423
428
424
Full length insert for glue-down or nail-on applications.
A,B
A,B
A,B
Lowbumperthreshold.10x1½”phillipsflatheadscrewsareincluded.
Extrahighbumperthreshold.10x2”phillipsflatheadscrewsareincluded.
Widebumperthresholdwithvinylmoisturebarrier.10x2”phillipsflatheadscrewsareincluded.
DISCONTINUED - Available while supplies last.
A, B
![Series 525 impact storefront · SECTION III-FABRICATION D - SILL WEEP NOTCHES [FIG. 7] [FIG. 8] PAGE 11 END OF SILL NOTCH LEGS AT EACH END INTERIOR END OF SILL TOP OF SILL EXTERIOR](https://img.pdfslide.net/doc/110x75/5e7747156c40261b1a1b3886/series-525-impact-storefront-section-iii-fabrication-d-sill-weep-notches-fig.jpg)
