Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Integrated Drive
Solutions
HowlandTechnology.com
Highly customizable drive packages for the
specific requirements of your application.
ET-010
ET-040
ET-080
Engineering Integration Expertise
VCL Proficiency
Specification from Component to Drive System
The most recent addition to our portfolio, Auburn Gear has been manufacturing exemplary gearing solutions
since 1982. Paired with CFR motors, these integrated drive packages are highly customizable to the specific
requirements of your application.
Phone: (847) 965-9808 [email protected] www.HowlandTechnology.com2
Primary Industries Served
Light EV
Material Handling
Work Platforms
Sweeper Scrubber Ground Support
Mining / Specialty Agriculture
On-Site/On-Staff Support
ET-010
ET-040
ET-080
ETRAC gearboxes are available with multiple reduction outputs and sizes. ET010, ET040, and ET080 can be mated with a variety of C.F.R. motors,
resulting in a completely custom solution tailored to your application.
Phone: (847) 965-9808 [email protected] www.HowlandTechnology.com 3
E-TRAC KIT PAIRINGS
ET010 24 V 18.6 Nm (164.6 in-lbs) 3.5 kW (4.69 hp) 2000
ET010 48 V 18.6 Nm (164.6 in-lbs) 3.5 kW (4.69 hp) 2000
ET040 48 V 28.7 Nm (254 in-lbs) 6 kW (8.04 hp) 2000
ET040 80 V 28.7 Nm (254 in-lbs) 6 kW (8.04 hp) 2000
ET040 48 V 38.2 Nm (338.1 in-lbs) 8 kW (10.72 hp) 2000
ET040 80 V 38.2 Nm (338.1 in-lbs) 8 kW (10.72 hp) 2000
ET040 48 V 47.8 Nm (423.1 in-lbs) 10 kW (13.40 hp) 2000
ET080 48 V 38.2 Nm (338.1 in-lbs) 8 kW (10.72 hp) 2000
ET080 80 V 38.2 Nm (338.1 in-lbs) 8 kW (10.72 hp) 2000
ET080 48 V 47.8 Nm (423.1 in-lbs) 10 kW (13.40 hp) 2000
ET080 80 V 57.3 Nm (507.1 in-lbs) 12 kW (16.09 hp) 2000
ET080 96 V 57.3 Nm (507.1 in-lbs) 12 kW (16.09 hp) 2000
Gearbox Voltage Nominal Motor Torque* Power Nominal RPM
*Kit output torque will change depending on the gear ratio selected.
• An integrated drive solution for 24 and 48 Volt systems.
• State-of-the-art advances in gearing and efficiency.
• Advanced E-TRAC system with custom wound AC motors.
• Superior power, performance, and reliability for your applications.
TARGET MARKETS AND APPLICATIONS• Commercial Turf Equipment Mowers, Sprayers• Aerial Work Platforms Scissor Lifts, Stock Pickers• Light Construction Floor Scrapers/Scrubbers• Ground Support Equipment Tugs, Helicopter Dollies• Industrial Equipment Automated Guided Vehicles• Specialty Agriculture
Phone: (847) 965-9808 [email protected] www.HowlandTechnology.com4
8000
7000
6000
5000
4000
3000
20001.48 1.28 1.08 0.88 0.68 0.48 0.28 0.08 -0.12 -0.32 -0.52 -0.72
Load
(lbs
.)
Max Radial Bearing LoadsBearing A Bearing C
Distance from Mounting Flange (in.)
ET010 E-TRAC DRIVE SOLUTION
GEAR RATIOS25.09 : 130.89 : 149.08 : 1
GENERAL SPECIFICATIONSMax. Intermittent Output Torque - 10,000 lb-inMax. Input Speed - 5000 RPMApprox. Paired Weight - 124.14 lbsApprox. Oil Capacity - 10 oz
BEARING CURVE
• An integrated drive solution for 48 and 80 Volt systems.
• State-of-the-art advances in gearing and efficiency.
• Advanced E-TRAC system with custom wound AC motors.
• Superior power, performance, and reliability for your applications.
16,000(7,256)14,000(6,349)12,000(5,442)10,000(4,535)8,000
(3,628)6,000
(2,721)4,000
(1,812)2,000(907)
0
2.27(57.66)Pref. Load Ctr.
- “A” HubPref. Load Ctr.- “F” Hub
Maximum Load Line10,100 lb (4,590)
1.60(40.64)
(-127.0) (-101.6) (-76.2) (-50.8) (-25.4) (0.0) (25.4) (50.8) (76.2)-5.00 -4.00 -3.00 -2.00 -1.00 0.00 1.00 2.00 3.00
MAX
IMU
M R
ADIA
L LO
AD, L
B (K
G)
DISTANCE FROM FLANGE MOUNT TO RADIAL LOAD, INCH (MM)
MAXIMUM BEARING CAPACITY VS. RADIAL LOAD LOCATIONB10 LIFE BASED ON 3,000 HRS @ 100 RPM
TARGET MARKETS AND APPLICATIONS• Industrial Equipment Automated Guided Vehicles• Specialty Agriculture Augers, Traction Drives• Light Construction Piggy-back Forklifts• Ground Support Equipment Tugs, Belt Loaders• Specialty Agriculture
Phone: (847) 965-9808 [email protected] www.HowlandTechnology.com 5
BEARING CURVE
ET040 E-TRAC DRIVE SOLUTION
GEAR RATIOS14.30 : 115.88 : 117.95 : 120.80 : 122.72 : 1
25.16 : 128.37 : 132.79 : 1 37.55 : 146.74 : 1
51.65 : 158.12 : 167.01 : 1
GENERAL SPECIFICATIONSMax. Intermittent Output Torque - 40,000 lb-inMax. Input Speed - 5000 RPMApprox. Paired Weight - 173.18 lbs, 195.23 lbs, 228.30 lbsApprox. Oil Capacity - 27 oz
20,000(9,070)
17,500(7,936)
15,000(6,803)
12,500(4,536)
10,000(4,536)
7,500(3,401)
5,000(2,268)
2,500(1,134)
6 5 4 3 2 1 0 -1 -2 -3 -4 (152.4) (127.0) (101.6) (76.2) (50.8) (25.4) (0.0) (-25.4) (-50.8) (-76.2) (-101.6)
ALLO
WAB
LE R
ADIA
L LO
AD -
LBS
(KG
)
SAE B, B1, C:2.47 (62.7)
B4, B5, C4, C5:1.22 (31.0)
BEARINGLIFE
BEARING LIFE CURVE BASEDON LIFE = 3000 HRS. B10SPEED = 100 RPM OUTPUT
MAXIMUM LOAD LIFE
WHEEL FLANGE MTG. FACE
PREFERREDCENTEROF LOAD• Commercial Equipment
People Movers• Construction Puller / Tensioner• Ground Support Equipment Tugs• Specialty Agriculture
Phone: (847) 965-9808 [email protected] www.HowlandTechnology.com6
• An integrated drive solution for 48, 80 and 96 Volt systems.
• State-of-the-art advances in gearing and efficiency.
• Advanced E-TRAC system with custom wound AC motors.
• Superior power, performance, and reliability for your applications.
TARGET MARKETS AND APPLICATIONS
BEARING CURVE
ET080 E-TRAC DRIVE SOLUTION
GENERAL SPECIFICATIONSMax. Intermittent Output Torque - 100,000 lb-inMax. Input Speed - 5,000 RPMApprox. Paired Weight - 318.23 lbs, 351.30 lbsApprox. Oil Capacity - 57 oz
GEAR RATIOS14.39 : 117.83 : 122.59 : 125.71 : 1
30.50 : 134.20 : 1 41.42 : 149.00 : 1
E-TRAC KIT PAIRINGSHTI # Gearbox Voltage Nominal Motor Torque* Power Nominal RPM
4928.042.191s ET010 24 V 18.6 Nm 3.5 kW 2000
4929.042.191s ET010 48 V 18.6 Nm 3.5 kW 2000
4932.042.191s ET040 48 V 28.7 Nm 6 kW 2000
4935.042.191s ET040 80 V 28.7 Nm 6 kW 2000
4936.042.191s ET040 48 V 38.2 Nm 8 kW 2000
4939.042.191s ET040 80 V 38.2 Nm 8 kW 2000
4942.042.191s ET040 48 V 47.8 Nm 10 kW 2000
4944.042.191s ET080 48 V 38.2 Nm 8 kW 2000
4946.042.191s ET080 80 V 38.2 Nm 8 kW 2000
4949.042.191s ET080 48 V 47.8 Nm 10 kW 2000
4950.042.191s ET080 80 V 57.3 Nm 12 kW 2000
4951.042.191s ET080 96 V 57.3 Nm 12 kW 2000
*Kit output torque will change depending on the gear ratio selected.
Phone: (847) 965-9808 [email protected] www.HowlandTechnology.com 7
H1 - (5) M12x1.5 on a 8.500” (215.90 mm) BCH1 - (9) Wheel Studs on 9.50” (241.3) BCH1 - (8) Wheel Studs on a 12.375” (314.33mm) BC
S1 - (6) 3/8 - 16UNC on a 7.500” (190.5mm) BCS1 - (6) 5/8 - 16UNC on a 10.500” (266.70 mm) BC Pilot - 9.00/8.995 (228.60/228.47)S1 - (8) 5/8 - 11UNC on a 10.500” (266.70 mm) BC
Hub Mount
Frame Mounting
All kits have a variety of possible hub and frame mounting options. Some applications may be more suited to a particular type of mounting solution. Our engineering team may assist with proper specification for your specific application.
MOUNTING OPTIONS
Howland Technology, Inc. • 8129 North Austin Avenue, Morton Grove, IL 60053 USA
Phone: (847) 965-9808 • Fax: (847) [email protected] • www.HowlandTechnology.com
HowlandTechnology.com
Howland Technology is your premier sales and component distribution channel, factory authorized for the distribution of all the products showcased.
Dedication to our customers, guided by our everyday principles, is the cornerstone of our success.
Howland Technology has continuously expanded in our role as a key supplier of power-related components for mobile and stationary equipment. We supply parts for a wide range of applications in industries such as: Industrial, Transportation, Telecommunication, Energy, Factory and Mobile Automation, Material Handling, Solar, Wind, Medical, and a variety of mobile applications requiring electrified solutions.
• Provide Positive Customer Experience• Honesty and Integrity Always• High Quality Standards and Established Brand Name Products• Ease of Doing Business• Innovative Products and Solutions• Persistent Attention to our Business• Effective Communication• Help and Support When You Need It• Share, Give Back to Less Fortunate• Ideal Employer, Customer and Supplier Responsiveness
Values and Mission Statement
Howland Technlogy, Inc also represents the following world class manufactureres: