The IntelliKnight System is the easy wayto make the most of fire alarmtechnology.

Description5820XL performs drift compensationand calibration checks on each of thesensors in the system.The basic 5820XL system can beexpanded by adding modules such as5860 remote annunciator, 5815XLsignalling line circuit expander, 5824serial/parallel printer interface module(for printing system reports), and5895XL intelligent power module.5820XL also features a powerful built-indual line fire communicator that allowsfor reporting of all system activity to aremote monitoring location.

Features• Up to 508 addressable points• Uses standard wire—no shielded or

twisted pair required• Built-in digital communicator• Central station reporting by point or

by zone• Built-in synchronization for

appliances from AMSECO®,Gentex®, Faraday, System Sensor,and Wheelock®

• Flexput™ I/O circuits• Supports Class B (Style 4) and Class

A (Style 6) configuration for SLC,SBUS, and Flexput circuits

• Distributed, intelligent power• Drift compensation• 13 pre-programmed output cadences

(including ANSI-3.41) and 4programmable outputs

• Built-in annunciator with 80-character LCD display

• RS-485 bus provides communicationto system accessories

• Built-in RS-232 and USB interface forprogramming via PC

• Built-in Form C trouble relay rated at2.5 amps at 27.4 VDC

• Improvements in SKSS softwaredeliver five times fasteruploads/downloads

• Two built-in Form C programmablerelays rated at 2.5 amps at 27.4VDC.

• Supports sounder bases• 6 amp power supply and maximum

charging capacity of 35 amp hours(An additional cabinet enclosure isrequired for batteries in excess of 18amp hours)

• Programmable date setting forDaylight Saving Time

• Plex-1 door option combines a deadfront cabinet door with a clearwindow, limiting access to the panelwhile providing single buttonoperation of the reset and silencefunctions

Electrical SpecificationsPrimary AC: 120 VRMS at 50/60 Hz, 2.5A or240 VRMS at 50/60 Hz, 1.4A

Total Accessory Load: 6A @ 27.4 VDC,power-limitedStandby Current: 215 mAAlarm Current: 385 mA

Flexput Circuits: Six programmablecircuits which can be programmedindividually as:

Notification circuits: 3A @ 27.4 VDC per circuit, power-limitedAuxiliary power circuits: 3A @ 27.4VDC per circuit, power-limitedInitiation Circuits: 100 mA @ 27.4VDC per circuit, power limited

Mechanical SpecificationsFlush Mount Dimensions:

14.5”W x 24.75”H x 3.9”D(36.8 W x 62.9 H x 9.8 D cm )

Overall Dimensions:16.2”W x 26.4”H x 4.2”D(40.6 W x 67 H x 11.8 D cm)

Weight: 28 lbs. (12.8 kg)Color: RedBattery Charging Capacity: 7.0-35 AHBattery Size: 18 AH max allowed incontrol panel cabinet. Larger capacitybatteries can be housed in RBBaccessory cabinet.Telephone Requirements:FCC Part 15 and Part 68 approvedType of Jack: RJ31X (two required)

IntelliKnight 5820XL is the first fire alarm system to provide you withrevolutionary value and performance in addressable sensing technology.The 5820XL FACP offers exclusive, built-in digital communication,

distributed intelligent power, a modular design and an expanded, easy to use interface. Powerful features suchas drift compensation and maintenance alert are delivered in this powerful FACP from Silent Knight.For more information about the 5820XL system, or to locate your nearest source, please call 1-800-446-6444, or in Minnesota, call 763-493-6435.

IntelliKnight® Model 5820XLAddressable Fire Alarm

Control System

INTELLIKNIGHT FIRE ALARM CONTROL PANEL

Model 5820XL

INTELLIKNIGHT FIRE ALARM CONTROL PANEL

IntelliKnight Model 5820XLAddressable Fire Alarm Control Panel

Indicator LightsGeneral Alarm (Red): Flashes when inalarm; solid when alarm silenced

Supervisory (Yellow): Flashes when asupervisory condition exists; solid whensupervisory silenced

System Troubles (Yellow): Flasheswhen a trouble condition exists; solidwhen trouble silenced

System Silenced (Yellow): On when analarm, trouble or supervisory conditionhas been silenced but not yet cleared

System Power (Green): Flashes for ACfailure; solid when power systems arenormal

System Application5820XL has one built-in signalling linecircuit (SLC) which supports 127devices. Three additional loops can beadded using the 5815XL SLCexpanders to increase overall capacityto 508 devices.

The 5820XL SLC loops supportmultiple device types, including:

• Addressable photoelectric smokedetector

• Addressable ionization smokedetector

• Addressable heat sensor

• Addressable duct smoke detector

• Contact module

• Relay output module

• Addressable notification module

The following advanced sensorcapabilities are available with 5820XL:

• Automatic drift compensation

• Maintenance alert

• Built-in sensor test to comply withNFPA 72 calibration testingrequirements

5820XL features a 6 amp power supplyand maximum battery chargingcapacity of 35 amp hours. An additionalcabinet enclosure (PN RBB) is requiredfor batteries in excess of 18 amp hours.

Flexput circuits on 5820XL control canbe individually programmed to functionas notification circuits, auxiliary poweroutputs, or initiation circuits thatsupport both 2- and 4-wire smokedetectors.The 5820XL system operates on non-twisted, unshielded cable when wiredin compliance with standard wiringpractices as called out in the NationalElectric Code 760-51 specifications forpower-limited fire protective signallingcables. No special wiring is required.5820XL provides 13 preset notificationcadence patterns (including ANSI 3.41)and four user programmable selectionsfor fire alarm notification.Two programmable general purposeForm C relay outputs are provided on5820XL.Additionally, the IntelliKnight systemfeatures a built-in walk test and auto-programming. Its innovative, dead-frontcabinet design allows for flush orsurface mounting. System maintenanceis easy to perform.

User InterfaceThe 5820XL built-in annunciator with80 character LCD display and largeeasy-to-use tactile touchpad can beused for system operation,programming and maintenance. It hasfive LEDs for alarm, supervisory,system trouble, system silenced andsystem power. System operationsinclude silencing alarms and troubles,resetting alarms and the display ofalarm troubles and memory. Thesystem's non-volatile event historybuffer stores 1000 events for viewingfrom the built-in or remote annunciator.System operation can be initiated witha mechanical firefighter's key or a valid4- to 7-digit operator's code.

ProgrammingThe IntelliKnight system offers severaloptions to simplify and speed upprogramming. The JumpStart® featureminimizes programming

required to start a new system. Thebuilt-in keypad and 5860 remoteannunciator give on-site access to allprogramming. You can also programremotely using the 5660 Silent KnightSoftware Suite, which is Windows®-based software.

Built-In Digital Communicator5820XL features a built-in UL listeddigital communicator for remotereporting of system activity and systemprogramming. The communicator hasthe ability to seize two telephone linesto report alarms and troubles to amonitoring facility. The communicatorsupervises two phone lines and willactivate a trouble signal if a line failureis sustained for more than 45 seconds.Other communication features include:retry if communication fails, two phonenumber capability, download phonenumber capability and Touch-Tone orrotary dialing. The communicator iscompatible with SIA and AdemcoContact ID. The format is selectable byaccount number.

ApprovalsNFPA 13, NFPA 15, NFPA 16, NFPA 72: Central Station; RemoteSignalling; Local Protective SignallingSystems; Auxiliary Protected PremisesUnit; & Water Deluge ReleasingService. Suitable for automatic,manual, waterflow, sprinklersupervisory (DACT non-coded)signalling services.

Other Approvals: UL Listed; CSFM 7170-0559: 135; MEA 429-92-E Vol. VI; FM Approved

IntelliKnight Model 5820XLAddressable Fire Alarm Control Panel

INTELLIKNIGHT FIRE ALARM CONTROL PANEL

SLC Detectors5820XL devices feature a low profiledesign and EEprom addressing.EEprom addressing prevents waterintrusion problems via the back of thesensor and eliminates mechanicalfailures related to decade switches.

SD505-APSAddressable photoelectric smokedetector.

SD505-AISAddressable ionization smoke detector.

SD505-AHSAbsolute temperature heat detectorthat goes into alarm immediately if thetemperature exceeds theprogrammable trip point. Trip pointrange from 135ºF–150ºF(0ºC–37ºC).

SD505-6ABSix inch base for use with detectorheads SD505-APS, SD505-AIS, andSD505-AHS.

SD505-4ABFour inch base for use with detectorheads SD505-APS, SD505-AIS, andSD505-AHS.

SD505-6SBSix-inch sounder base for use withexisting sensor and base. Operates insingle and multi-station modes and/oras a system sounder. Requires 2additional wires for power.

SD505-6IBSix-inch isolator base for use withexisting base and the SD505-APS, SD505-AIS, and SD505-AHS sensors.Provides isolation for style 7 circuits.

SD505-6RBSix-inch relay base for use with existingsensor and base. Provides one Form Ccontact.

SD505-ADHDuct housing that detects smoke inHVAC ducts.

SD505-ADHRDuct detector base with relay. ProvidesForm C alarm contact. For use withSD505-APS and SD505-AIS sensors.Compatible with SD505-DTS remotetest switch.

SD500-PS/SD500-PSDASD500-PS is a single action pull stationand SD500-PSDA is a dual action pullstation.

SLC ModulesSD500-AIMDry contact input module for use withnormally open dry contacts. It featuresan indicator LED to show alarm status.

SD500-MIMMini dry contact input module is a smallversion of the SD500-AIM. For use withpull stations and other normally opendry contact inputs.

SD500-ANMAddressable notification moduleproviding a single Class A or Class Bnotification circuit on the SLC.

SD500-ARMAddressable relay module. Features 2Form C output relays. Providesindicator LED to show output status.

SD500-SDMTwo-wire detector input module. Allowsfor the connection of conventional 2-wire detectors on the SLC loop.Requires two additional wires forpower.

SD500-LIMA short circuit isolator module for SLCdevices. When a short occurs on theSLC loop, it is detected as a trouble,but all SLC devices protected by theisolator module continue to operate.

SD500-LEDAn LED driver module capable ofdriving 80 LEDs. Use up to 40 modulesper SLC loop and up to 100 SD500-LED modules per system.

S-BUS Accessories5860/R Remote Fire AnnunciatorFeatures the same 80 character backlitLCD display keypad and firefighter'skeyswitch as the 5820XL. 5860 is grayand 5860R is red.

5815XL Signal Line Circuit ExpanderThe SLC expander is used to add moreaddressable devices to the IntelliKnightsystem. 5820XL supports three5815XLs. Each 5815XL can support127 devices.

5895XL Intelligent Power ModuleAdds 6 amps of power, 6 Flexput I/Ocircuits and 2 Form C relay circuits to a5820XL system.

5496 Intelligent Power ModuleA 6 amp notification power expanderthat provides four power-limited notifi-cation appliance circuit outputs.

5880 LED/IO ModuleFeatures 40 LEDoutputs, 8 normallyopen dry contactinputs, and one piezooutput.

5865-3 and 5865-4 Remote LED AnnunciatorFeatures 30 programmable LED (15red and 15 yellow) outputs, and a piezosounder. The 5865-4 adds a silenceand reset switch to the package.

5883 Relay BoardFeatures 10 general purpose Form Crelays. Used with 5880 module.

5824 Serial/Parallel Printer Interface ModuleProvides one parallel and one RS-232serial port for connecting a printer tothe 5820XL. Use to print a real-time logof system events, detector statusreports, and event history. Interfaceswith building control system.

Miscellaneous Accessories5660 Silent Knight Software Suite(SKSS)User-friendly Windows software forremote programming of 5820XLs usinga PC. Upload and view panel accountinformation, event history, and detectorstatus.

5670 Silent Knight Software Suite(SKSS)Powerful end-user facility managementsoftware allows viewing of detectorstatus and event history via modem ordirect connection.

Plex-1Dead front cabinet door with clearwindow to limit access to the FACP.

RBBRemote battery box accessory cabinet.Use if backup batteries are too large tofit into FACP cabinet. Dimensions:16” W x 10” H x 6” D(406 mm W x 254 mm H x 152 mm D)

SD505-DTSRemote test switch. Used with SD505-ADHR. Provides remote keyoperated test function and annunciationof detector alarm.

INTELLIKNIGHT FIRE ALARM CONTROL PANEL

MADE IN AMERICA

FORM# 350210 Rev E, 04/06

Copyright © 2006 Silent Knight

This document is not intended to be used for installation purposes. We try tokeep our product information up-to-date and accurate. We cannot cover allspecific applications or anticipate all requirements. All specifications aresubject to change without notice. For more information, contact Silent Knight7550 Meridian Circle Suite 100, Maple Grove, MN 55369-4927. Phone: (800) 328-0103, Fax: (763) 493-6475.

IntelliKnight & JumpStart are Registered Trademarks of Silent KnightFlexput is a Trademark of Silent Knight