Embed Size (px)
Citation preview
www.aitelong.com Aitelong Technology Co.,Ltd.
SAT-AR01Battery internal resistance tester
Keeping your system safe and running!
TM
Internal resistance and Voltage out of
gauge alarm
User-exchangeable probes and Clamp
High precision online testing
Powerful data management function
As a digital storage and multifunction test equipment
which can analysis the battery according
to the history data.
AT-AR01 Storage battery internal resistance tester cans quick and accurate measurement of battery running status. It can show and
record multi group battery voltage resistance etc.And also precisely judge battery s condition (Good or Bad) and Data analyzing
software.
S
Full automatically switch the testing range and great capacity data storage.
Automatically switch the testing range between 0.000m -99.999m .
store up to 999 groups battery parameter and 200 groups battery parameter setting.
USB flash Drive or RS232 for Data transfer
Enhanced over pressure protecting function.
Self recovery the over current protecting function.
Use the SOC chip to improve the tester stability.
Big capacity Lithium cell and AC 100V-240V
power supply
Low battery indicates.
Automatic testing mode make user to test
expediently.
Technical indicator
PC software management
Regarding the conclusion about Conductance and Capacity
Keeping your system safe and running!
TM
www.aitelong.com Aitelong Technology Co.,Ltd.
A301 Qinfeng Pavilion, Xi'an Software Park, No.68, 2nd Keji Road, Xi'an, Shaanxi, P.R.China 710075
SAT-AR01Battery internal resistance tester
Automatically analysis battery bad state.
Building the history record base, describe the battery sate curve.
Batteries contrastive analysis in the same battery pack.
All batteries are administrated by different levels(excellent, good, medium, bad)
t present, Lead acid storage battery maintenance is applied for the check of Float voltage of battery at home, it has been found that
Voltage is irrelevance with Capacity of battery, because Voltage is only to show battery s basic parameters.
Internationally, Resistance test is widely applied in daily battery maintenance instead of Voltage check, because Resistance is reflection
to internal parameters of battery with high precision worldwide.
Regarding the conclusion about Conductance and Capacity: when battery conductance is lower than 25% of Initial Value (basic value),
battery can t be the test of Capacity. When battery resistance is higher than 2 times of initial value, battery capacity will be lower 80%
of rated capacity.
A
Internal resistance 0.000m -99.999m Voltage 0.000v--25v
Internal resistance 1 Voltage 1mV
Internal resistance 0.5%rdg 6dgt Voltage 0.2%rdg 6dgt
10.8V,1900mAh, Rechargeable Lithium battery
Work for 8 hours continuously.
16Mbit Flash
320 x 240 LCD
280 x 105 x 83 mm
1.2Kg
-5 --60
90%RH
Testing range
Min. measurement resolution
Measurement precision
Power supply
Working time
Storage capacity
Display
Size
N.W
Working temperature
Humidity
Phone: +86 (29) 87669465 Fax: +86 (29) 87669645 Email: [email protected]
