Upload
vuongthien
View
231
Download
0
Embed Size (px)
Citation preview
International CAD Conference and Exhibition
Final Program – CAD’13 Volume 10
CAD’13 JUNE 17‐20, 2013 UNIVERSITY OF BERGAMO
BERGAMO, ITALY
www.cadconferences.com
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 2 of 226
International CAD Conference and Exhibition Final Program
ISSN 2291‐1987
CAD’13 Volume 10
www.cadconferences.com/Program/CAD13Program.html
Copyright © 2013
311 Digital Workflows Inc.
Ontario Corp. 002250165
26 Ormerod Close
Dundas, ON L9H 7N7 Canada
Tel (905) 379‐1378
www.cadconferences.com
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 3 of 226
Keynote Speakers
Umberto Cugini Politecnico di Milano
ITALY
Topic: From CAD to Virtual Prototyping: The Evolution of the Approach to Product Development
Abstract: Computer Aided Design tools for Mechanical Engineering have been available for over 50 years now. Their history started with simple 2D drafting tools. Today, we are in the era of Virtual Prototyping and Functional Mock Up. There has been an evolution from geometry, which represents statically the shape of machines and components, to functional models, which describe and drive the simulation of the system physical behaviour in real‐time within interactive environments. In the Product Development Process the evolutions of enabling tools went in the opposite direction: from modeling the documents that synthesize the results of the design process back to the initial problem setting, at an increasingly abstract level. The presentation will go through this evolution pointing out the lessons learned, and provide hints to forecast next steps.
Giovanni Ceccarelli Ceccarelli Yacht Design and Engineering
ITALY
Topic: Yacht Design and Engineering
Abstract: Ceccarelli Yacht Design and Engineering is one of the most famous Italian yacht design firms. The company was founded by Epaminonda Ceccarelli, and has now been passed to his son Giovanni.
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 4 of 226
Jan Larsson Siemens Industry Software Limited
UNITED KINGDOM
Topic: Embedding of Design and Engineering Intent within CAx Models and Assemblies
Abstract: Jan Larsson is the Senior Marketing Director EMEA for Siemens PLM Software’s Product Engineering solutions. His presentation will cover the need for a clear strategy when it comes to product and process re‐use and the value of embedding knowledge into the product engineering process to help innovation while maintaining standards, shorten lead time, and ensure manufacturability.
Masaharu Tosu iCAD Ltd. JAPAN
Topic: Ultra Fast 3D CAD System for Machine Design
Abstract: Mr. Masaharu Tosu is the General Manager, Research & Development Division, iCAD Ltd. His speaking topic is "Ultra Fast 3D CAD System for Machine Design”. Production facilities and machine tools consist of numerous parts, of the order of several thousands. The geometries of such partes are generally represented by analytic curved surfaces. On the basis of these features, iCAD has developed a 3D CAD system using Constructive Solid Geometry (CSG) that can display one million parts in 0.2 seconds. he will discuss the superiority of CSG over Boundary‐Representation (B‐Rep), and describe the technology underlying iCAD. Using a notebook PC, a demonstration of how iCAD performs at high speeds with massive datasets will be given.
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 5 of 226
Charlie C.L. Wang Chinese University of Hong Kong
CHINA
Topic: Design for Human‐Centered Freeform Products: What is the Next?
Abstract: Dr. Charlie C. L. Wang is currently an Associate Professor at the Department of Mechanical and Automation Engineering, the Chinese University of Hong Kong, where he began his academic career in 2003. He gained his B.Eng. (1998) in Mechatronics Engineering from Huazhong University of Science and Technology, M.Phil. (2000) and Ph.D. (2002) in Mechanical Engineering from the Hong Kong University of Science and Technology. He is a member of ASME and IEEE, and Past‐Chairman of Technical Committee on Computer‐Aided Product and Process Development (CAPPD) of ASME. He is currently on the editorial board of Computer‐Aided Design journal, International Journal of Precision Engineering and Manufacturing, and Journal of the Chinese Institute of Industrial Engineers. Dr. Wang has received a few awards including the ASME CIE Young Engineer Award (2009), the CUHK Young Researcher Award (2009), the CUHK Vice‐Chancellor's Exemplary Teaching Award (2008), the Best Paper Awards of ASME CIE Conferences (in 2008 and 2001), and the Prakash Krishnaswami CAPPD Best Paper Award of ASME CIE Conference in 2011.
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 6 of 226
Workshop
Emotional Engineering
Emotional Engineering is a challenging and fascinating research topic attracting many researchers from
various disciplines, including Engineering, Design, Neuroscience, Perception and Cognition, etc. The
primary purpose of the EE SIG workshop is to gather a community of researchers and practitioners from
different disciplines and sectors interested in exchanging and discussing ideas and issues about the
emerging role of emotions in the engineering disciplines in order to share a roadmap for further
researches and investigations in this new interdisciplinary field. Participant presentations and ideas will be
published and shared with the broader community through the EE‐SIG web page.
Invited speakers
Shuichi Fukuda, EE‐SIG Chair(Stanford University and ASME‐CIE)
Monica Bordegoni, EE‐SIG Co‐chair (Politecnico di Milano)
Marco Maiocchi (Politecnico di Milano)
Alberto Gallace (Università Milano Bicocca)
Emotional Engineering SIG (EE‐SIG) http://www.designsociety.org/ee‐sig
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 7 of 226
Sponsors / Exhibitors
CAD’13 gratefully acknowledges the generous financial support listed below:
Università Degli Studi di Bergamo
iCAD LTD.
iCAD LTD. (www.icad.jp) ‐ 3D CAD System for Designing Machinery
IQ Soft, Inc. (www.iqsoft.gr) – Custom Development and Software Outsourcing company with headquarters in Ioannina, Greece
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 8 of 226
Banquet and Awards Dinner, Monday, June 17, 2013 (included with all registrations)
7:30pm
Roof Garden Restaurant of Hotel S. Marco
Piazza della Repubblica, 6
24112 Bergamo (GB)
The Best Paper Awards, and other Acknowledgements, will be presented at the Banquet.
The location is near the listed hotels.
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 9 of 226
Gala Dinner, Wednesday, June 19, 2013 (separate purchase and reservation)
The CAD’13 Gala Dinner will be held at Villa Baiana (http://www.villabaiana.it) in Moticelli Brusati. Villa Baiana, laid out on three floors, is placed in a wonderful location. It has large halls and terraces with a panoramic view, and is surrounded by a park with ancient trees, among them a very valuable cedar of Lebanon, dated 1784, and a knotty tamarisk dated 1820.
La Montina, a Franciacorta wine producer (http://www.lamontina.it) is also located at this site. The La Montina estate consists of approximately 72 hectares of vineyard spread across 7 different communes of the Franciacorta region. The vineyards lie across low hillsides with soils consisting of calcareous clay and silt. The event includes a visit to the wine cellar and wine tasting.
PROGRAM h. 17.30: Leave the Conference Location by bus
h. 18.30: Visit to the wine cellar The event will start with a guided tour to the wine cellar during which it will be described the Franciacorta complex journey from vineyard to bottle, how much hard work goes into the production of each delicate glassful, about the 70 times that each bottle is carefully handled during its 3 year development in the cellar.
h. 19.30: Aperitif with small appetizers and local products
h. 20.15: Dinner with wine tasting
h. 22.30: Leave Villa Baiana by bus
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 10 of 226
Bergamo Map
For a higher resolution image refer to the conference web site.
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 11 of 226
CAD’13 Bus Schedule
During the conference, a bus named Special Service – CAD’13 will travel from the Hotels to the Conference
Site in the morning, and from the Conference Site to the Hotels in the afternoon. The schedule times are
listed below:
17 JUNE, 2013
h. 8:00 am ‐ from HOTELS to CONFERENCE h. 8:00 am ‐ departure from Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 8:05 am ‐ departure from Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
h. 8:15 am ‐ arrival of the bus in Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location.
h. 8:20 am ‐ from HOTELS to CONFERENCE h. 8:20 am ‐ departure from Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 8:25 am ‐ departure from Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
h. 8:35 am ‐ arrival of the bus in Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location.
h. 6:20 pm ‐ from CONFERENCE to HOTELS h. 6:20 pm ‐ departure from Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location
h. 6:25 pm ‐ arrival at Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 6:30 pm ‐ arrival at Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
h. 6:40 pm ‐ from CONFERENCE to HOTELS h. 6:40 pm ‐ departure from Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location
h. 6:45 pm ‐ arrival at Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 6:50 pm ‐ arrival at Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
18 JUNE, 2013
h. 8:20 am ‐ from HOTELS to CONFERENCE h. 8:15 am ‐ departure from Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 8:20 am ‐ departure from Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
h. 8:30 am ‐ arrival of the bus in Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location
h. 8:40 am ‐ from HOTELS to CONFERENCE h. 8:40 am ‐ departure from Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 8:45 am ‐ departure from Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
h. 8:55 am ‐ arrival of the bus in Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location
h. 6:20 pm ‐ from CONFERENCE to HOTELS h. 6:15 pm ‐ departure from Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location
h. 6:25 pm ‐ arrival at Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 6:30 pm ‐ arrival at Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
h. 6:40 pm ‐ from CONFERENCE to HOTELS h. 6:40 pm ‐ departure from Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location
h. 6:50 pm ‐ arrival in front of Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 6:55 pm ‐ arrival in front of Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 12 of 226
19 JUNE, 2013
h. 8:30 am ‐ from HOTELS to CONFERENCE h. 8:30 am – departure from Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 8:35 am ‐ departure from Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
h. 8:45 am ‐ arrival of the bus in Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location
h. 5:30 pm ‐ from CONFERENCE to HOTELS h. 5:30 pm ‐ departure from Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location
h. 5:40 pm ‐ arrival in front of Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 5:45 pm ‐ arrival in front of Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
20 JUNE, 2013
h. 8:30 am ‐ from HOTELS to CONFERENCE h. 8:30 am ‐ departure in front of Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 8:35 am ‐ departure from Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
h. 8:45 am ‐ arrival of the bus in Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location.
h. 4:00 pm ‐ from CONFERENCE to HOTELS h. 4:00 pm ‐ departure from Piazzale Sant'Agostino ‐ Bergamo (Upper Town) ‐ CAD'13 Location
h. 4:10 pm ‐ arrival in front of Hotel Cappello d'Oro ‐ Viale Papa Giovanni XXIII n° 12, Bergamo (Lower Town)
h. 4:15 pm ‐ arrival in front of Hotel Mercure ‐ Viale Papa Giovanni XXIII n° 100, Bergamo (Lower Town)
Alternatively, and at other times, you can take the Bus ATB Line n.1 (see Bergamo Map), Direction Colle
Aperto, Stop Mura.
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 13 of 226
Conference Rooms Map
Ground Floor
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 14 of 226
Conference Rooms Map
First Floor
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 15 of 226
Event Photos
Main Entrance
Plenary Session Lecture Room
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 16 of 226
Best Student Paper Award
Flavien Boussuge, Ahmad Shahwan, Jean‐Claude Léon, Stefanie Hahmann, Gilles Foucault and Lionel Fine Introduced by Wim Bronsvoort and presented by Alex Ntermaris (representing sponsor IQ Soft)
Best Overall Paper Award Kenjiro Miura (center) with Al Spence (left) and Wim Bronsvoort (right)
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 17 of 226
Umberto Cugini
Daniele Regazzoni
Janet Spence, Allan Spence, Caterina Rizzi, Giorgio Colombo
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 18 of 226
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 19 of 226
Organization
General Chair
Allan Spence, McMaster University, CANADA
Conference Co‐Chairs
Caterina Rizzi, University of Bergamo, ITALY
Giorgio Colombo, Politecnico di Milano, ITALY
Executive Coordinator
Janet Spence, 311 Digital Workflows Inc., CANADA
Lead Paper Chair
Willem F. Bronsvoort, Delft University of Technology, THE NETHERLANDS
Publications Coordinator and Computer‐Aided Design & Applications Editor‐in‐Chief
Les Piegl, University of South Florida, USA
Paper Co‐Chairs
C. Greg Jensen, Brigham Young University, USA
Ajay Joneja, University of Science and Technology, HONG KONG
Franca Giannini, CBR IMATI‐Ge, ITALY
Wael Abdelhameed, University of Bahrain, BAHRAIN
Amba Bhatt, M. N. National Institute of Technology, Allahabad, UP, INDIA
Host Committee
Daniele Regazzoni, University of Bergamo, ITALY
Davide Russo, University of Bergamo, ITALY
Giancarlo Facoetti, University of Bergamo, ITALY
Francesco Bassi, University of Bergamo, ITALY
Monica Bordegoni, Politechnic of Milan, ITALY
Massimo Fucci, Soluzionimpresa, ITALY
On‐Site Assistants
Andrea Vitali, University of Bergamo, ITALY
Giordano De Vecchi, University of Bergamo, ITALY
Roberto Morotti, University of Bergamo, ITALY
Marco Ramondino, Polytechnic of Milan, ITALY
Simone Bartesaghi, Politechnic of Milan, ITALY
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 20 of 226
Long Term Planning
Ramy Harik, Lebanese American University, LEBANON
Puneet Tandon, PDPM Indian Inst. Information Technology, INDIA
Philip Azariadis, University of the Aegean, GREECE
Industrial Advisory Board
Bob Hedrick, CNC Software, CANADA
Jordan Cox, Brigham Young University, USA
Ron Fritz, Tech Soft 3D, USA
Leslie Gordon, Machine Design, USA
Derek Murphy, Studica Limited, CANADA
David Kasik, The Boeing Company, USA
David Levin, LEDAS, Russia
Fenqiang Lin, MachineWorks Ltd., UK
John Stuart, PTC, USA
Tamas Varady, Geomagic, Inc., USA
Guy Haas, TeamEDA, USA
William Mondy, Adiana Research and Development, USA
International Program Committee
Charyar Mehdi‐Souzani, LURPA ‐ ENS CACHAN, FRANCE
Nadia Magnenat‐Thalmann, Nanyang Technological University, SINGAPORE
J. Cecil, Oklahoma State University, USA
Hui Zhang, Tsinghua University, CHINA
Jianmin Zheng, Nanyang Technological University, SINGAPORE
Michele Germani, Università Politecnica delle Marche Via Brecce Bianche, ITALY
Takashi Kanai, University of Tokyo, JAPAN
Shimin Hu, Tsinghua University, CHINA
Zhongke Wu, Beijing Normal University, CHINA
Anath Fisher, Technion, ISRAEL
James Yang, Texax Tech University, USA
Tae‐wan Kim, Seoul National University, KOREA
Junhai Yong, Tsinghua University, CHINA
Norimasa Yoshida, Nihon University, JAPAN
Ahmad Nasri, American University of Beirut, LEBANON
Juan Carlos Torres, Universidad Granada, SPAIN
Peter Hehenberger, Johannes Kepler University, AUSTRIA
Eraldo Jannone da Silva, Universidade de Sao Paulo, BRAZIL
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 21 of 226
Academic Advisory Board
C.K. Au, Nanyang Technological University, SINGAPORE
H. Bao, Zhejiang University, CHINA
E. Bohez, Asian Institute of Technology, THAILAND
C. Bradley, University of Victoria, CANADA
P. Brunet, Universitat Politecnica de Catalunya, SPAIN
G. Brunnett, Technische Universität Chemnitz, GERMANY
Y. Chen, The University of Hong Kong, HONG KONG
S.H. Choi , The University of Hong Kong, HONG KONG
C.‐H. Chu, National Tsing‐Hua University, TAIWAN
R.H. Crawford, University of Texas at Austin, USA
W.J.E. Derigent, Centre de Recherche en Automatique de Nancy, FRANCE
D. Dutta, University of Illinois at Urbana–Champaign, USA
C. M. Eastman, Georgia Institute of Technology, USA
G. Elber, TECHNION, ISRAEL
J.Y.H. Fuh, The National University of Singapore, SINGAPORE
R. Gadh, University of California, Los Angeles, USA
J. Gao, University of Greenwich at Medway, UK
J.S. Gero, University of Sydney, AUSTRALIA
S.K. Gupta, University of Maryland, USA
B. Gurumoorthy, Indian Institute of Science, INDIA
R.F. Harik, Lebanese American University , LEBANON
C.M. Hoffmann, Purdue University, USA
R. Joan‐Arinyo, Universitat Politcnica de Catalunya, SPAIN
A. Joneja, UST Hong Kong, HONG KONG
D.‐S. Kim, Hanyang University, SOUTH KOREA
M.‐S. Kim, Seoul National University, SOUTH KOREA
Y.S. Kim, Sungkyunkwan University, SOUTH KOREA
T.R. Kurfess, Georgia Institute of Technology, USA
A. Kusiak, The University of Iowa, USA
K. Lee, Seoul National University, SOUTH KOREA
Y.‐S. Lee, North Carolina State University, USA
W. Ma, City University of Hong Kong, HONG KONG
T. Maekawa, Yokohama National University, JAPAN
S. Mann, University of Waterloo, CANADA
R. R. Martin, University of Wales College of Cardiff, UK
H. Masuda, The University of Tokyo, JAPAN
C.‐H. Menq, The Ohio State University, USA
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 22 of 226
K. T. Miura, Shizuoka University, JAPAN
A. H. Nasri, American University in Beirut, LEBANON
S. C. Park, Ajou University, SOUTH KOREA
N. M. Patrikalakis, MIT, USA
Q. Peng, Zhejiang University, CHINA
K. Ramani, Purdue University, USA
E. Red, Brigham Young University, USA
W. C. Regli, Drexel University, USA
G. Renner, Hungarian Academy of Sciences, HUNGARY
C. A. Roberts, Arizona State University, USA
D. Rosen, Georgia Institute of Technology, USA
N. S. Sapidis, University of Western Macedonia, GREECE
C. H. Sequin, University of California, Berkeley, USA
J. Shen, University of Michigan ‐Dearborn, USA
K. Shimada, Carnegie Mellon University, USA
K. Sugihara, The University of Tokyo, JAPAN
J. Sun, Chinese Academy of Engineering, CHINA
W. Sun, Drexel University, USA
H. Suzuki, University of Tokyo, JAPAN
S.‐T. Tan, University of Hong Kong, HONG KONG
K. Tang, UST Hong Kong, HONG KONG
G. Turkiyyah, University of Washington, USA
C. C. L. Wang, The Chinese University of Hong Kong, HONG KONG
Y. Xiong, Chinese Academy of Sciences, CHINA
D. Xue, The University of Calgary, CANADA
M. Yang, Korea Advanced Institute of Science and Technology, SOUTH KOREA
D. H. Yoon, The University of Michigan ‐Dearborn, USA
M. M. F. Yuen, UST Hong Kong, HONG KONG
C. W. J. Zhang, University of Saskatchewan, CANADA
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 23 of 226
Reviewers and Volunteers The conference sincerely appreciates the efforts of the many peer reviewers, on‐site assistants, and everyone who volunteered their efforts to successfully bring the conference together.
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 24 of 226
Presentation Schedule – Title (Extended Abstract Number): Author1; Author2; …
Monday Morning, 17 June 2013
8:00‐8:50 Registration (Room 2)
8:50‐9:00 Welcome and Opening Remarks (Room 5), Chair: Allan Spence
Prof. Stefano Paleari, Rector of University of Bergamo
Introduced by Caterina Rizzi
9:00‐10:00 Keynote K1: From CAD to Virtual Prototyping:
The Evolution of the Approach to Product Development (Room 5)
Speaker: Umberto Cugini, Politecnico di Milano, ITALY
Chair: Caterina Rizzi
10:00‐10:20 Coffee Break (Room 5‐annex) Registration (Room 2)
10:20‐12:20 Virtual Prototyping I (A)
Chair: Monica Bordegoni (Room 5)
Bio‐Engineering I (B)
Chair: Ajay Joneja (Room 1)
Geometric Modeling (C)
Chair: Ramanathan
Muthuganapathy (Room 7)
10:20‐10:50 Streamlining Function‐oriented
Development by Consistent
Integration of Automotive Function
Architectures with CAD Models
(60): Moritz Cohrs; Stefan Klimke;
Gabriel Zachmann
Prosthesis socket design through
Shape Optimization (5): Francesco
Saverio Frillici; Federico Rotini
Substituting Simple Structural
Beam‐Frame Substructures with
Equivalent Beam‐Plate
Combinations (77): Steven Tebby;
Ahmad Barari; Ebrahim
Esmailzadeh
10:50‐11:20 Using Augmented 3D Objects
Instead Of Proxies In 3D UIs (107):
Tom Kuehnert; Stephan Rusdorf;
Guido Brunnett
Analysis and Evaluation of Limb
Alignment in Total Knee
Replacement (21): Nilesh
Ghongade; Dr. Ravi Warkhedkar;
Ashok Shyam
Domain Mapping for Volumetric
Parameterization using Harmonic
Functions (64): Vikash Gupta; Hari
K Voruganti; Bhaskar Dasgupta
11:20‐11:50 Re‐engineering of the haptic
feedback of a dishwasher door (14):
Francesco Ferrise; Serena Graziosi;
Guilherme Phillips Furtado; Monica
Bordegoni; Dino Bongini
FE analysis of contact between
stump and socket during simulation
of amputee motion (55): Giorgio
Colombo; Roberto Morotti;
Caterina Rizzi
Determining curves in the convex
hull from a set of planar freeform
closed convex curves (24):
Vishwanath A.V.; Ramanathan
Muthuganapathy
11:50‐12:20 Design of a Desktop Haptic System
driven by CAD and Multi‐body
Associativity (68): Mario
Covarrubias; Monica Bordegoni
A Study on Parametric Shape
Modifications of 3D Skeletal
Models (23): Jenson YC Lee; Ajay
Joneja
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 25 of 226
Monday Afternoon, 17 June 2013
12:20‐13:30 Lunch Break (Room 5‐annex)
13:30‐14:30 Keynote K2: Yacht Design and Engineering (Room 5)
Speaker: Giovanni Ceccarelli, Ceccarelli Yacht Design and Engineering
Chair: Giorgio Colombo
14:30‐14:50 Coffee Break (Room 5‐annex) Registration (Room 2)
14:50‐16:50 Machining (D)
Chair: Christophe Tournier
(Room 5)
Reverse Engineering (E)
Chair: Testsuo Oya (Room 1)
Architectural Design (F)
Chair: Nan‐Ching Tai (Room 7)
14:50‐15:20 A potential field approach for
collision avoidance in 5‐axis milling
(54): Virgile Lacharnay; Christophe
Tournier; Pierre‐Yves Péchard;
Claire Lartigue
A Rendering Method of Laser
Scanned Point Clouds of Large Scale
Environments by Adaptive Graphic
Primitive Selection (97): Hiroaki
Date; Takashi Maeno; Satoshi Kanai
Interactive interior design in
Augmented Reality environment
(57): Giandomenico Caruso; Guido
Re; Marina Carulli; Monica
Bordegoni
15:20‐15:50 Improved Spiral High Speed
Machining of Pockets With Islands
(51): Martin Held; Christian
Spielberger
Feature‐preserving outermost‐
surface polygonization from CT
images (36): Takashi Michikawa;
Masaki Moriguchi; Hiromasa Suzuki
Visual Architectural Topology ‐‐‐ An
Ontology‐Based Topological Tool in
an Architectural Case Library (7):
Chieh‐Jen Lin
15:50‐16:20 In‐Situ Measurement and
Distributed Computing for
Adjustable CNC Machining (95):
Allan Spence; Alan Sawula; James
Stone; Yu Pin Lin
Reconstruction method of trimmed
Surfaces with maintaining G1‐
continuity with adjacent surfaces
(26): Yuta Muraki; Katsutsugu
Matsuyama; Kouichi Konno;
Yoshimasa Tokuyama
Notes on Generative modeling,
Procedural Symmetry and
Constructability of Architectural
Design (73): Shen‐Guan Shih
16:20‐16:50 Integration Of Machining
Constraints In Design Optimization
Of A Guide Vane Cascade (59):
Julien Monge; Christian Vessaz;
François Avellan; Christophe
Tournier
High Quality shape fitting for
aesthetic modeling based on Class
A condition (91): Tetsuo Oya; Hiroki
Amemiya; Hideki Aoyama;
Masatake Higashi
Applications of Luminance Contrast
in Architectural Design (9): Nan‐
Ching Tai
16:50‐18:00 Vendor Time and Networking (Room 3)
Please visit with our vendors and sponsors
Registration (Room 2)
18:00‐19:30 Free Time
19:30‐23:00 Dinner and Awards Banquet: Volunteer Recognition and Best Paper Awards
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 26 of 226
Tuesday Morning, 18 June 2013
8:00‐9:00 Registration (Room 2)
9:00‐10:00 Keynote K3: embedding of design and engineering intent within CAx models and assemblies (Room 5)
Speaker: Jan Larsson, Siemens Industry Software Limited, United Kingdom
Chair: Caterina Rizzi
10:00‐10:20 Coffee Break (Room 5‐Annex) Registration (Room 2)
10:20‐12:20 Knowledge/Design Intent (G)
Chair: Les Piegl (Room 5)
Reverse Engineering II (H)
Chair: Jie Shen (Room 1)
Meshes (I)
Chair: Hiroaki Date (Room 7)
10:20‐10:50 An application of enhanced
knowledge‐based design in
automotive seat development (49):
Severin Stadler; Mario Hirz
Voxel‐based path planning for 3D
scanning of mechanical parts (33):
Claire Lartigue; Yann Quinsat;
Charyar Mehdi‐Souzani; Alexandre
Zuquete‐Guarato; Shadan Tabibian
Extraction of surface‐feature lines
on meshes using normal tensor
framework (27):
Shoichi Tsuchie; Masatake Higashi
10:50‐11:20 Mapping Design Rationale to
Support Function‐Behavior‐
Structure Modeling in Product
Design (56): Yan Liang; Ying Liu;
Davide Russo
REFM: A Reverse Engineering For
Manufacturing approach (98):
Salam Ali; Alexandre Durupt; Pierre
Antoine Adragna; Magali Bosch
Weaving a four‐dimensional mesh
model from a series of three‐
dimensional voxel models (93):
Masahiko Onosato; Yosuke Saito;
Fumiki Tanaka; Ryoji Kawagishi
11:20‐11:50 An integrated approach supporting
design, simulation and production
engineering of connection
techniques in automotive body‐in‐
white development (61): Katharina
Thum; Mario Hirz; Johannes Mayr
Iterative Sampling for Flatness
Inspection Using High Density Data
Points (79): Ahmad Barari; Sergio
Mordo
Optimal Rotational Symmetry Cell
Mesh Construction for FE Analysis
by Symmetry‐constrained Local
Delaunay Refinement (48):
Weijuan Cao; Ming Li; Shuming
Gao
11:50‐12:20 A knowledge‐guided approach to
line‐curve intersection (13):
Les Piegl; Khairan Rajab
Local‐Global Image Binarization for
Reconstructing the Cellular Structure
of Polymer Foam Materials (6):
Michael Greenleaf; Jie Shen; David
Yoon
Quality Improvement of Deformed
Mesh Models for FEA by Density
and Geometry‐recovering Phased
ODT Smoothing (89):
Hiroki Maehama; Hiroaki Date;
Satoshi Kanai
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 27 of 226
Tuesday Afternoon I, 18 June 2013
12:20‐13:30 Lunch Break (Room 5‐annex)
13:30‐15:00 Product Life Cycle Management
(J)
Chair: Qingjin Peng (Room 5)
Curves and Surfaces I (K)
Chair: Martin Held (Room 1)
Multi‐User Systems (L)
Chair: Wim Bronsvoort (Room 7)
13:30‐14:00 An integration of ECO‐DESIGN
guidelines based on structural
optimization in a CAD framework
(84): Davide Russo; Caterina Rizzi
Type‐Constrained Direct Fitting of
Quadric Surfaces (25): James
Andrews; Carlo Sequin
Data consistency and conflict
avoidance in a multi‐user CAx
environment (10): Robert Moncur;
C. Greg Jensen; Edward Red; Chia‐
Chi Teng
14:00‐14:30 Using 3D CAD models for value
visualization: an approach with
SIEMENS NX HD3D Visual
Reporting (42): Marco Bertoni;
Alessandro Bertoni; Henk Broeze;
Gilles Dubourg; Clive Sandhurst
It is time to drop the “R” from
NURBS (52): Les Piegl; Khairan Rajab
Effective Collaboration through
Multi‐user CAx by Implementing
New Methods of Product
Specification and Management
(81):
Vonn Holyoak; Edward Red; Greg
Jensen
14:30‐15:00 Interface adaptability for an
industrial painting machine (28):
Chonglin Hu; Qingjin Peng; Peihua
Gu
Curvature‐Continuous
Approximation of Planar Curvilinear
Profiles (31):
Martin Held; Dominik Kaaser
Scalable Integration of Commercial
File Types in Multi‐User CAD (69):
Ammon Hepworth; C. Greg Jensen;
Glen Phelps; Joshua Bennett;
Thomas Nysetvold
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 28 of 226
Tuesday Afternoon II, 18 June 2013
15:00‐15:20 Coffee Break (Room 5‐annex) Registration (Room 2)
15:20‐16:50 CAD‐CAE Integration (M)
Chair: Christopher Tierney
(Room 5)
Curves and Surfaces II (N)
Chair: Kenjiro Miura (Room 1)
CAD Education (O)
Chair: Ferruccio Mandorli (Room 7)
15:20‐15:50 A feature and script based
integration of CAD and FEA to
support design of variant rich
products (78): Joel Johansson
Algorithm for directional projection
of parametric curves onto B‐spline
surfaces (71): Hai‐Chuan Song; Jun‐
Hai Yong
Collaboration Platforms and the
Effectiveness of a Virtual Team: A
Case Study (66): Gerardo A. Garcia;
Pedro Orta; Héctor R. Siller
15:50‐16:20 On the use of machine learning to
defeature CAD models for
simulation model preparation
(53):
Florence Danglade; Jean‐Philippe
Pernot; Philippe Véron
Quasi‐Log‐Aesthetic Curves in
Polynomial Bézier Form (12):
Norimasa Yoshida; Ryo Fukuda;
Toshio Saito; Takafumi Saito
Analyzing Adaptive Expertise and
Contextual Exercise in Computer‐
Aided Design (86): Xiaobo Peng;
Prentiss McGary; Elif Ozturk;
Bugrahan Yalvac; Michael Johnson;
Lauralee Valverde
16:20‐16:50 Managing equivalent
representations of design and
analysis models (29): Christopher
Tierney; Declan Nolan; Trevor
Robinson; Cecil Armstrong
Designing Log‐aesthetic Splines with
G2 continuity (16):
Kenjiro Miura; Dai Shibuya;
Gobithaasan R.U.; Shin Usuki
Negative knowledge and a novel
approach to support MCAD
education (15): Ferruccio Mandorli;
Harald E. Otto
16:50‐18:00 Vendor Time and Networking (Room 3)
Please visit with our vendors and sponsors Registration (Room 2)
18:00‐ Free Evening
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 29 of 226
Wednesday Morning I, 19 June 2013
8:00‐9:00 Registration (Room 2)
9:00‐10:30 Genetic/Optimization Algorithms
(P)
Chair: Alexander Martha (Room 5)
Curves and Surfaces III (Q)
Chair: Norimasa Yoshida (Room 1)
CAD Applications (R)
Chair: Roberto Raffaeli (Room 7)
9:00‐9:30 Particle Swarm Optimization (PSO)
Based Topology Optimization of
Part Design with Fuzzy Parameter
Tuning (20): Jianan Lu; Yonghua
Chen
High‐quality approximation
technique for two offset surfaces
adjoining with G1‐continuity (22):
Naoyuki Satoh; Katsutsugu
Matsuyama; Kouichi Konno;
Yoshimasa Tokuyama
Simulating a system of locomotion
similar to the architecture of the
frog via oblique planes (37):
Dina Rochman; Sergio Vazquez
9:30‐10:00 Optimization of assembly processes
of an automobile wire harness (44):
Masakazu Kobayashi; Masatake
Higashi
Shape Analysis of Cubic Bézier
Curves – Correspondence to Four
Primitive Cubics (83): Takafumi
Saito; Midori Yamada; Norimasa
Yoshida
Parametric Design and Structural
Analysis of Deployable Origami
Tessellation (8): Nixon Wonoto;
Daniel Baerlecken; Russell Gentry;
Matthew Swarts
10:00‐10:30 Preprocess‐Optimization for
polypropylene laser sintered parts
(19): Thomas Reinhardt; Alexander
Martha; Gerd Witt; Peter Köhler
A web‐based platform to support
contract furniture design (76):
Maura Mengoni; Margherita
Peruzzini; Roberto Raffaeli;
Damiano Raponi
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 30 of 226
Wednesday Morning II, 19 June 2013
10:30‐11:00 Coffee Break (Room 5‐annex) Registration (Room 2)
11:00‐12:30 Object Archival and Retrieval (S)
Chair: Jerry Fuh (Room 5)
Bio‐Engineering II (T)
Chair: Remus Tutunea‐Fatan
(Room 1)
Circuit Design (U)
Chair: Miri Weiss Cohen (Room 7)
11:00‐11:30 A review on 3D Object Retrieval
methodologies using a part‐based
representation (96): Panagiotis
Theologou; Ioannis Pratikakis;
Theoharis Theoharis
GPU Parallel Computation of Bio‐
Material Damage (88): Vela Diego;
Jie Shen; Chi Chow
A Design System for 3D Bending
Shape of Flexible Printed Circuit in
Electronics Device (87): Rie Ohta;
Hiromasa Suzuki; Takashi
Michikawa; Yutaka Ohtake; Eiji
Ohta; Masayosh Hashima; Yuich
Sato
11:30‐12:00 Unsupervised shape classification
of convexly touching coated parts
with different geometries (45):
Rajalingappaa S; Ramamoorthy B.;
Ramanathan Muthuganapathy
Computer‐aided dental setup
simulation for orthodontic
treatment (106): Hong‐Tzong Yau;
Tsan‐Jui Yang
Computer‐Aided 3D ICs Layout
Design (47): Katarzyna Grzesiak‐
Kopeć; Maciej Ogorzałek
12:00‐12:30 Sampling Strategies for 3D Partial
Shape Matching and Retrieval
Using Bag‐of‐Words Model (18):
Yan Wang; W.F. Lu; J.Y.H. Fuh
Minimization of Bone Removal
Through Optimal Humeral Implant
Alignment in Total Elbow
Arthroplasty (72): Alexander
Heroux; Remus Tutunea‐Fatan;
Shaun Salisbury; Ahmad Barari
A Decision Support System for
Analog Circuit Design using Genetic
Algorithms (32): Miri Weiss Cohen;
Michaa Aga
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 31 of 226
Wednesday Afternoon, 19 June 2013
12:30‐13:30 Lunch Break (Room 5‐annex)
13:30‐14:30 Keynote K4: Ultra Fast 3D CAD System for Machine Design (Room 5)
Speaker: Masaharu Tosu, General Manager, Research & Development Division, iCAD Ltd., Japan
Chair: Allan Spence
14:30‐14:50 Coffee Break (Room 5‐annex) Registration (Room 2)
14:50‐16:50 Workshop: Emotional Engineering
Chair: Monica Bordegoni (Room 5)
Emotional Engineering is a challenging and fascinating research topic attracting many researchers from
various disciplines, including Engineering, Design, Neuroscience, Perception and Cognition, and others. The
purpose of this workshop is to gather a community of researchers and practitioners from different
disciplines and sectors interested in exchanging and discussing ideas and issues about the emerging role of
emotions in the engineering disciplines in order to share a roadmap for further researches and
investigations in this new interdisciplinary field.
Panelists and Speakers:
Shuichi Fukuda, EE‐SIG Chair (Stanford University and ASME‐CIE)
Monica Bordegoni, EE‐SIG Co‐chair (Politecnico di Milano)
Marco Maiocchi (Politecnico di Milano)
Alberto Gallace (Università Milano Bicocca)
16:50‐17:30 Vendor Time and Networking (Room 3)
Please visit with our vendors and sponsors Registration (Room 2)
17:30‐23:00 Gala Dinner (Wine tasting at La Montina followed by dinner at Villa Baiana):
Buses leave from and return to conference site. For those who have purchased tickets.
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 32 of 226
Thursday Morning, 20 June 2013
8:00‐9:00 Registration (Room 2)
9:00‐10:00 Keynote K5: Design for Human‐Centered Freeform Products: What is the Next? (Room 5)
Speaker: Charlie C.L. Wang, Chinese University of Hong Kong, China
Chair: Les Piegl
10:00‐10:20 Coffee Break (Room 5‐annex) Registration (Room 2)
10:20‐12:20 Assembly Design (V)
Chair: Joshua Summers (Room 5)
Reverse Engineering III (W)
(Room 1)
Chair: Francesca Campana
Rapid Prototyping (X)
Chair: Chair:Ahmad Barari (Room 7)
10:20‐10:50 Virtual Simulation of Assembly
Sequencing using Disassembly
Method (46): Wen F. Lu; Yoke San
Wong
Knowledge management for the
selection of 3D digitizing systems
in relation with application
requirements (94): Nicolas
Audfray; Charyar Mehdi‐Souzani;
Claire Lartigue
Slice Generation and Data Retrieval
Algorithm for Rapid Manufacturing of
Heterogeneous Objects (39):
Vikas Gupta; Puneet Tandon
10:50‐11:20 Solving under‐constrained
assembly problems incrementally
using a kinematic method (62):
Yong Liu; Hai‐Chuan Song; Jun‐Hai
Yong
A development of tailor‐made
design system for arm brace(75):
Katsutoshi Ootsubo; Kazuya
Kobayashi, G.; Ken Yamaguchi
Robust Slicing Procedure based on
Surfel‐Grid (11): Di Qi; Long Zeng;
Matthew, M.‐F. Yuen
11:20‐11:50 Template‐based geometric
transformations of a functionally
enriched DMU into FE assembly
models (65): Flavien Boussuge;
Ahmad Shahwan; Jean‐Claude
Léon; Stefanie Hahmann; Gilles
Foucault; Lionel Fine
A computational method for
bilateral symmetry recognition in
asymmetrically scanned human
faces (41): Luca Di Angelo; Paolo
Di Stefano
Direct Slicing of surface models in
CAD systems for rapid manufacturing
applications (17): Alexander Martha;
Peter Köhler
11:50‐12:20 Design Enabler to Recognize
Duplicate Geometries in CAD
Assemblies (3): Aravind
Shanthakumar; Joshua Summers
Study of a point cloud
segmentation with part type
recognition for automatic
tolerance inspection of plastic
components via Reverse
Engineering techniques (92):
Francesca Campana; Michele Bici;
Luca Tito; Stefano Petriaggi
Adaptive Slicing Approach to Control
Surface Error Factor in Rapid
Prototyping Process (82): Snahungshu
Sikder; Ahmad Barari; Hossam
Kishawy
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 33 of 226
Thursday Afternoon, 20 June 2013
12:10‐13:30 Lunch Break (Room 5‐annex)
13:30‐14:00 Virtual Prototyping II (Y)
Chair: Daniele Regazzoni (Room 5)
Model Reconstruction (Z)
Chair: Masaji Tanaka (Room 1)
CAD Support (AA)
Chair: Niccolò Becattini (Room 7)
13:30‐14:00 Methods Of CAD Based Automation
And Simulation By The Example Of
Virtual Stone Chipping Testing (43):
Markus Ernst; Mario Hirz; Severin
Stadler
A method to analyze 2D vector
floor plan and reconstruct 3D
models (101):
Junfang Zhu; Hui Zhang; Yamei
Wen
The importance of geometric trace
in the accuracy of models (38):
Marisol Anguiano; Carlos Flores;
Dina Rochman
14:00‐14:30 Identification of Weld Beads in
Assemblies of B‐Rep Models (40):
Roberto Raffaeli; Marco Mandolini;
Michele Germani
Reconstruction of 3D geometry of
general curved surfaces from a
single image (85): Alok Jha; B
Gurumoorthy
CAD Feature Extraction Using Opitz
Coding System (108): Leila
Zehtaban; Dieter Roller
14:30‐15:00 Digital Human Models and Virtual
Ergonomics to Improve
Maintainability (99): Daniele
Regazzoni; Caterina Rizzi
A Feature‐Based Method to
Reconstruct 3D Models from
sketches of Mechanical Parts (80):
Masaji Tanaka
Question/answer techniques within
CAD environments: an investigation
about the most effective interfaces
(4): Niccolò Becattini; Yuri
Borgianni; Gaetano Cascini;
Federico Rotini
15:00‐15:15 Wrap‐Up (Room 5)
Chair: Allan Spence
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 225 of 226
AN ANNUAL, INTERNATIONAL CONFERENCE
CONNECTING PEOPLE IN CAD/CAM/CAE
RESEARCH, EDUCATION AND BUSINESS
11th Annual CAD Conference June 23‐26, 2014 – Hong Kong, China
It is a pleasure to announce that the 11th annual International CAD Conference and Exhibition will be held at the Hong Kong University of Science and Technology, China, June 23‐26, 2014.
Opened in 1991, The campus occupies a beautifully landscaped 150 acre site on Clear Water Bay peninsula in East Kowloon, less than 30 minutes from Central Hong Kong. It is easily reached by taxi from the Hong Kong International Airport (HKG).
Hong Kong is a First Class Asia World City, with many, many towering skyscrapers, a Ladies’ Market, Tsim Sha Tsui Promenade, Temple Street Night Market, The Big Buddha and Po Lin Monastery, and beautiful views from Victoria Harbour. There are many festivals, and wonderful food. Just beyond is the Pearl River Delta, and of course mainland China.
Contributions from all aspects of CAD are expected including Modeling, Analysis, High‐Performance Graphics, Data Management, Knowledge Engineering, Collaborative Design, Reverse Engineering, and Prototyping. Applications can be in Architecture, Bio‐ Medicine, Civil Engineering, Fashion Industry, Industrial Design, Sustainable Energy Design, etc.
International CAD Conference and Exhibition, Final Program CAD’13 Volume 10 Page 226 of 226
CORE ORGANIZATION Host Chairs: Ajay Joneja, Hong Kong University of Science & Technology [email protected] Weiyin Ma, City University of Hong Kong [email protected]
General Chair: Al Spence, McMaster University, CANADA [email protected]
Lead Paper Chair: Wim Bronsvoort, Delft University of Technology, THE NETHERLANDS [email protected]
Journal Publications Chair: Les Piegl, University of South Florida, USA [email protected]
WEBSITES Conference: www.cadconferences.com Journal: www.cadanda.com
IMPORTANT DATES November 4, 2013 – Extended Abstract Submission System Opens
January 6, 2014 – Extended Abstract Submission Deadline: See conference website for details.
January 20, 2014 – Extended Abstract Decisions
February 17, 2014 – Invited Journal Manuscript Submission Deadline
March 17, 2014 – Journal Manuscript Decisions
April 11, 2014 – Registration and Visa Assistance Deadline At least one author must register by this date.
May 2, 2014 – Author Submitted Final Materials Deadline
June 23‐26, 2014 – CAD’14 at Hong Kong University of Science and Technology, China