Upload
john-quinn
View
215
Download
1
Tags:
Embed Size (px)
Citation preview
International Experience for Freshman Engineering Students through Multi-National Global Design Projects
Ivan E. Esparragoza
The Pennsylvania State University
Outline
Introduction and Background
Planning the International Collaboration
Multi-national Collaborative Design Project
Difficulties and Benefits
Students Assessment and Response
Conclusion and Final Remarks
Introduction
Establishment of new regional economic alliances.
Almost all major corporations now operate globally.
Engineers are being challenged to: Design and develop new products for a global market Work with multinational teams Provide service to international customers Work in multinational corporations
Introduction
Globalization implies that engineers must be prepared to face the new world.
Incorporating multi-national design projects is a very effective practice to expose the students to the international experience .
The new technology available for communication has facilitated the implementation of multi-national projects with teams disperse in different countries .
Introduction
This work summarizes the first experience introducing multi-national global design projects in the freshman engineering design and graphics course.
The impact of this idea in the engineering students.
The advantages and difficulties in developing the international collaboration.
Background
Penn State Delaware County is part of the Penn State University system.
This is a commuter campus which offers the first two years of engineering.
The student population is formed mainly by local residents who are non-traditional students. Students hold part-time or full-time jobs while in the school No previous teamwork or design projects experience No knowledge of foreign language
Background
Recognizing for the future engineer the importance of: Diversity Worldwide market Multi-national teams, and Global design
Incorporate multi-national design projects for freshman engineering students on this campus.
Background
Partnership:
Universidade Federal deJuiz de Fora, Brazil
University Park Delaware County
Universidad AutonomaDe Occidente, Colombia
Planning the International Collaboration
Selection of the Courses: PSU – Engineering Design & Graphics UAO – Basic Design UFJF – Voluntaries
Academic Calendar: PSU – Second half UAO & UFJF – Mid & First half
Time Zone US-COL Same EST after two weeks US 1 hour ahead US-BR Brazil 2 hours ahead after two weeks 1 hour ahead
Planning the International Collaboration
Selection of the Students: PSU – Engineering Design & Graphics (Freshman) UAO – Basic Design (Freshman) UFJF – Voluntaries (Sophomore)
Language Requirements: English has been extensively used as a common language
for international collaborations and it was used as the official language for this initiative
Collaborative Tools: MSN messenger and Skype were used for the AV
conferences and chatting PSU cms used for exchange of files and information.
Planning the International Collaboration
International coordination Contact of instructors Coordinating schedules Selecting the project Interaction multi-national
teams Technology for
communication
Local coordination Technical resources Forming local teams Delivering the project Provide time for AV
conference
Task to be accomplished:
Multi-national Collaborative Design Project Methods of structuring international projects:
Type Description Length
Case Studies The single reporting of the final result of a design project to their opposite group.
One time
In-class experience
Show and Tell Work in separate projects in the different countries and come together to progressively explain to the other teams how the work is developing
Short term
In-class experience
Parallel Teams The student teams in each country work independently on the same design proposal. Students are encouraged to
share data and ideas.
Short term
Multi-team projects
Integrated Teams Students in each country work together on a joint design project.
Long term
Out of class professional project
Multi-national Collaborative Design Project Scheme structure for international project: parallel
design.
Week Activities
1 Establish personal relationship among the students and share their understanding of the problem.
2 Discuss the local development of the problem and the local ideas for design objectives.
3 Share selected solutions.
4 Share sketches and CAD drawings.
5 Assessment of the solutions.
Multi-national Collaborative Design Project Description of the design project:
The design of the mounting (support) system for a portable electronic warning sign for road emergencies which is easy to carry in the trunk of a car.
Following the parallel design projects scheme, students were allowed to work independently on each location.
Students were asked to share information and data with their international.
Difficulties and Benefits
Difficulties:
Time: time zones, schedules, delivery Language: translators Technology problems Resistance from the students to work with other
teams More work for the instructor
Difficulties and Benefits
Benefits:
Global design: more diversity International collaboration Cultural awareness: value of cultural differences in
design Teamwork: multi-national teams Communication skills Collaborative tools Fun into engineering courses Recruitment and retention
Students Assessment and Response
It is very important for the instructors to determine the impact and effectiveness of the global design projects and the international collaboration in reaching the learning outcomes set at the beginning of the process.
It is also critical to have the students’ perspective about this experience in terms of the structure and its implementation.
Students Assessment and Response
Students were formally evaluated by grading their final design and their participation in the international collaboration.
Students were also asked to assess the global design project.
Team assessment
Individual assessment
Students Assessment and Response
Team assessment: Number of times they had AV conference with their partners Number of time they had contact, besides the AV
conference, with their partners Number of times they discussed the problem and possible
solutions with their partners
The first revealing issue was that one team had at least five contacts with the international partner while the other team reported two including AV conference, chat sessions and e-mail exchange
Both teams reported technological problems for communication.
Students Assessment and Response
Individual assessment: Most of the students found very interesting working with
international students. All the students consider that this was a pleasurable
experience Many students reported that was somehow confusing what
their teams have to do with the global assignment. However, there was a group of students that understood the process from the very beginning.
By a simple majority students found more or less difficult to work with international teams. The others found not much difficult.
Students Assessment and Response
Individual assessment: Students placed language constraint as the number one
thread for this type of collaboration. No interaction beyond the AV conference was placed as number two and technical problems as number three
The majority of the students reported they would like to do more projects like this.
All the students think engineers must learn to work in distributed teams.
The majority of the students consider this experience helped them to be prepared to work in distributed teams.
Students Assessment and Response
Despite of the language constraint, the technical difficulties, the lack of experience and the few interactions of some participants, the overall experience was very positive for the students and the instructors.
It was also observed that students found the global design project more motivating than previous local projects.
Conclusion and Final Remarks
This first global design project experience provides the bases for the commitment of this campus to offer an international experience to the freshman engineering students.
The overall response of the students participating and the effort of the instructors coordinating this initiative contribute to a successful practice.
Conclusion and Final Remarks
Some of the issues to be considered for future alliances: Coordinate the schedules and meeting times with the other
participants ahead in advance. Try to start this type of collaborations with a number of
teams that can be easily managed. Assign specific activities for the AV conferences or chat
meetings and request a written progress report to keep the students engaged in the project.
Incorporate global design projects as part of a course and assign a grade to the project.
Collaborative tools: technology might be a problem in this type of initiatives. Have always a backup plan in case that a technological problem arises.
Conclusion and Final Remarks
The benefits discoveries in this type of projects are significant to the students and the instructors.
Students: Teaming international partners New friends Valuable international experience
Instructors Broader view of engineering education Links with colleagues for future exchange and research
collaboration