Upload
badrinath-kadam
View
218
Download
0
Embed Size (px)
Citation preview
8/2/2019 INTERVIEW Question for L1-Desktop Eng Chandra
1/6
1. Difference between Fat32 partition and NTFS partition?
Ans- NTFS
1) Allows access local to w2k w2k3 XP win NT4 with SP4 & later may get access for some file.
2) Maximum size of partition is 2 Terabytes & more.
3) Maximum File size is upto 16TB.
4) File & folder Encryption is possible only in NTFS.
5) Disk Quota for users.
FAT 32
1) Fat 32 Allows access to win 95 98 win millennium win2k xp on local partition.
2) Maximum size of partition is upto 2 TB.
3) Maximum File size is upto 4 GB.
4) File & folder Encryption is not possible.
2. How to open Net meeting?
Ans-Type conf in Run.
3. How to increases Virtual memory in windows?
Ans-
In Windows XP
1.Click Start, and then clickControl Panel.
2.ClickPerformance and Maintenance, and then click System.
3.On the Advanced tab, under Performance, clickSettings.
4.On the Advanced tab, under Virtual memory, click Change.
5.Under Drive [Volume Label], click the drive that contains the paging file that you want to change.
6.Under Paging file size for selected drive, click to Custom size check box. You can enter the
amount of memory you would like to reserve for Virtual memory by entering the initial and maximum
size.
7.ClickSet
When you are prompted to restart the computer, click Yes.
Special Note: You should choose the same amount for the initial size and maximum size. This will
Stop your CPU from constantly changing the paging file.
HOT TIP: To stop your CPU from constantly changing the paging file, set the initial and maximum size
to the same value. For example, 500 and 500. The value should be at least 1.5 times more than your
physical RAM. If your computer has 512MB of RAM increase the virtual memory paging file to
1.5*512= 768
In Vista
1. ClickStart button Picture of the Start button
2. ClickControl Panel
8/2/2019 INTERVIEW Question for L1-Desktop Eng Chandra
2/6
3. Choose System and Maintenance and then clickSystem.
4. In the left pane, clickAdvanced system settings.
5.On the Advanced tab, under Performance, clickSettings.
6. Click the Advanced tab, and then, under Virtual memory, choose Change.
7. ClickCustom to change the Initial size (MB) and Maximum size. See the hot tip above.
Remember to choose the drive you would like to use to increase the virtual memory. In most cases it
usually your C: Drive. You can set the initial size and maximum size after clicking the Custom size
check box.Remember its better to keep the Virtual memory values the same.
Also having enough available space is absolutely necessary for your virtual memory and RAM to
function properly.
4. How to create local user in windows xp?
Ans-
To begin, open Control Panel and double-click the Users And Passwords icon. When you see the Users And
Passwords dialog box, shown in Figure A, click the Add button.
5. How to enable remote desktop in windows xp?
Ans-To set up the Remote Desktop, start with the host computer, which in this example is your work
computer.
1. Verify that you are signed in as the administrator.
2. Click Start, click Control Panel, and then click Performance and Maintenance.
3. Click System.
4. Click the Remote tab, select the Allow users to connect remotely to this computer check box, and then
click OK.
6. How to enable Hybernate? What is the use of Hibernate?
Ans-
1. ClickStart, clickControl Panel, clickPerformance and Maintenance, and then clickPower
Options.
2. Or, if you see the little battery indicator on your task bar, right-click it and then clickAdjust Power
Properties. The Power Options Properties dialog box opens, as shown in Figure 2.
Just click the Enable Hibernation check box and you're all set. You will, however, need enough free disk
space to hold all of your memory in a single file. This means, if your laptop has 512 MB of RAM as mine
does, you'll need roughly 512 MB of free disk space on drive C.
7. How to change Speed of Network adaptor?
Ans- Open configure properties LanSpeed advance &change the value. Duplex-
8/2/2019 INTERVIEW Question for L1-Desktop Eng Chandra
3/6
8. How to Find Mac address of Computer?
Ans- type in command prompt- Ipconfig /all,
Or Double click on LAN
Support
Detail
Mac address.
9. How to open Group Policy in windows Xp?
Ans-Gpedit.msc or
10. Name of the windows service involved in printing process?
Ans-print spooler
11. Whats is the default location of Microsoft Outlook?
Ans. C:\Documents and Settings\ (Account Name) \Local Settings\Application Data\Microsoft\Outlook.
12. PST stands for??
Ans- Personal Storage Table
13. How to repair PST?
Ans-Scanpst.exe is tool inbuilt feature of Microsoft.
14. How to Set Signature in PST?
Ans-Tools Signatures. Mail format options
15. How to enable Read receipt option of mails in Microsoft outlook?.
Ans- Tools enable read receipt. Tracking Option Email option preference options
16. How to configure Ldap? Ldap Stand For???
Account Ans- tools Server Internet Directory Services New Address book Setting
user name password. name-
Ldap stand for
Lightweight Directory Access Protocol
17. The difference between half-duplex and full-duplex
8/2/2019 INTERVIEW Question for L1-Desktop Eng Chandra
4/6
?
Ans- Half-duplex devices let you send and receive, but only one-way at a time
But full-duplex devices let you send and receive in two-way at a same time.
18. Colour code for Straight cable?
Ans-
1.White orange
2.orange
3.White green
4.Blue
5.White blue
6.Green
7.White Brown
8.Brown
19. Colour Code for Cross Cable?
Ans-
20. How to renew ip address?
Ans- Step1
Command ipconfig /release prompt
Step2
Command ipconfig /renew prompt
21. Types of ram??
Ans- 1.SDRAM (Synchronous DRAM)
2.
DDR (Double Data Rate SDRAM)
3. Rambus DRAM (RDRAM)
22. How to enter in Bios?
Ans-press Del or F2, F12
23. Bios setting Not saving, Why???
Ans-Change Cmos battery or update cmos firmware.
24. How to change booting sequence in bios?
Ans- Boot order Tab Bios.
8/2/2019 INTERVIEW Question for L1-Desktop Eng Chandra
5/6
25. How to rectify memory dump????
Ans- replace Ram, and later replace hard disk cable.
26. What is Fdisk command??
Ans-used for Partition creation in windows 98.
27. How to check SMPS???
Ans-short green and black cable.
28. Types of hard disk??
Ans-
IDE , Scsi and Sata Interfaces
29Quota error during send/revive mail
Ans- Archive mails to release space from server and the compact the mail if
user have proper rights
30.User name not found on server during mail configuration?
Ans. Type the correct name if not know correct name then copy and paste
the id file name
31. Remote system no longer responding during opening mail box?
Ans. Check system is in network or not if in network then check it is
pinginging the server or not if not then put the correct server name in
setting if setting is correct then make entry in hot file for that server if entry
is already is there the check the firewall setting it should be off if still
problem is there then trace server like this(file>>Preferences>>user
preferences>> Ports>>Trace>>trace)
If After trace it show connected to server and still ploblem is there then
reconfigure lotus after taking proper backup
32.Archive setting tool box not opening?
Ans. Connect to sysadmin it is rights issue
33. Name not resolving from address book when type name in new memo
Ans. Exit from lotus and login again if still u found same check location
Document
34. In archive setting compact tab is not active?
Ans. Contact to sysadmin it is rights issue
8/2/2019 INTERVIEW Question for L1-Desktop Eng Chandra
6/6
35.
Mail not showing in inbox?
Ans. Check view all document and mark unread settings in the edit menu
36. you have different password on another id match the password of
another id when we Reconfigure Lotus?
Ans. Check the correct id file and replace old id file in data folder with
correct id otherwise contact to sysadmin to reset password
37.You are not authorized to open this mail box When we create mail box
icon in workspace?
Ans. Contact to sys admin in this case
38. User cannot close his read mail window in his inote when his mail opens
in separate window?
Ans. Upgrade the Jawa then login again in inote
39. Notes error while Opening the inbox when we open mail box
Ans. Kill two services from task manager 1 ntask ldr.exe 2 nlnotes.exe and
login again