INTRODUCTIONW

IRE

DM

ICR

OP

HO

NE

S

2

In 2007, Electro-Voice celebrates 80 years of unmatched innovation inmicrophone design and manufacturing. Back in 1927, company founders AlKahn and Lou Burroughs started out as true pioneers, establishing theindustry standard for audio excellence and reliability while continuouslyupping the ante with breakthrough technologies like Variable-D™ and noisecancellation.

From day one, Electro-Voice built all its microphones to be bulletproof andsound beautiful. It’s not unusual to see a classic Electro-Voice microphones likethe 635A—the broadcast industry standard fondly known as the “BuchananHammer” after Electro-Voice’s former home in Michigan—still going strongafter 30 years on the job.

Eight decades on, Electro-Voice microphones continue to deliver the sound ofhistory’s most significant events. We’ve helped the world hear everything fromthe very first radio broadcasts to John Glenn’s first orbit of the Earth; fromElvis and the Beatles to world tours with today’s biggest artists; from KnutRockne using his “Electric Voice” at Notre Dame to the state-of-the-art mics atthis year’s Superbowl; from Presidential inaugurations to tonight’s eveningnews; from Dr. Martin Luther King’s “I Have A Dream” speech to the Next BigThing rehearsing in the garage next door…

Electro-Voice stays true to its roots as a great American brand while advancingto new heights in the 21st Century. We were the first to offer N/DYM™neodymium technology in microphones, and the only wireless to offerClearScan™ for quick, automatic wireless microphone channel coordination.And that’s just the beginning—our engineers are constantly working on newways to keep your tone intact…

Our latest and greatest? REV™. Made in the USA to the industry’s higheststandards, the new REV intelligent wireless system places Electro-Voice inpole position, adding its unique features to our hefty portfolio of patentsand award-winning wireless technologies. REV’s optimizedaudio path was developed to provide the truestrepresentation of a wired microphone or guitar soundpossible in a wireless system. Simply put, this is themost wired-sounding wireless you’ve ever heard.

From soundcheck to encore, Electro-Voicemicrophones offer great sound, durability,ergonomics and style, whether you’reoutfitting a world tour, a house of worship, aprofessional studio or a neighborhood blockparty. We believe the equipment you useshould withstand both the rigors ofperformance and the scrutiny of yourlisteners. At Electro-Voice, innovating newproducts to make you sound your best is jobnumber one—our name says it all.

WIR

ED

MIC

RO

PH

ON

ES

3

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

LIVE MICROPHONESRE410 – RE510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6–7N/DYM Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8–14RE200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15EV Raven & Cardinal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16–17Cobalt Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18–19

BROADCASTRE20 – RE27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20–21RE50, 635, RE16, ENG618 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22–25

INSTALLPolarChoice Satellite/Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26PolarChoice Plus, FL, XLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27RE90, RE92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28–31

GENERAL PURPOSE MICROPHONESGeneral Purpose Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32–33

ACCESSORIES / TECH INFOWired Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34–35Wired Microphones Tech Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36–37Wired Microphones Selection Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . .38–39

WIRELESS MICROPHONESRE-2 Wireless System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42–43REV Wireless System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44–45RE-2 Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46EV Wireless Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48–51FMR-500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52–53FMR-1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54–55Safe-1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56–57Soundmate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60–61Telex Wireless Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62–63Wireless Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64–67

LIVEMICROPHONES

4

I N T R O D U C T I O N

WIR

ED

MIC

RO

PH

ON

ES

Electro-Voice® Live Sound Microphones

Electro-Voice® has long been a leader in the design andmanufacture of live sound microphones. Preferred byperformers the world over since the company was founded,Electro-Voice microphones have been seen in the hands of themusic industry’s greatest artists. Today’s endorser list is no lessimpressive (please see page opposite) and includes performersfrom virtually every musical genre. So, why have so many top-name performers chosen Electro-Voice microphones overthe years? Let us explain...

Better Sound: The “Garbage In = Garbage Out” Factor

The bottom line is that no vocalist should go to a gig withouthis/her own mic, specifically chosen to match his/her vocaltype and music style. Electro-Voice engineers have putinnumerable hours into developing a number of microphonesthat suit various vocal types. Why? From the company’sengineering department to its sales and marketing staff,Electro-Voice is comprised of real, performing musicians. Theyrealize that the microphone is the first step in the signal pathand should represent the voice or instrument as naturally aspossible – because, after all, garbage in equals garbage out.The purest voices are often polluted by poor or improperlychosen equipment. Electro-Voice is dedicated to maintainingthe integrity of what the vocalist or musician puts into theirmics. No amount of equalization or processing can fix whatstarts out as garbage because of the wrong mic. And whetheryou’re playing a coffee house “open mic” or performing infront of 40,000, you should sound your very best.

Choices – Why Settle for the Old Standard?

Electro-Voice® provides the performer with options for bothvocal and instrument use. From lead vocals to kick drum orguitar amp, Electro-Voice has the perfect mic to suit yourunique application. Why settle for the old standard? All mics ARE NOT created the same.

5

ENDORSERS

WIR

ED

MIC

RO

PH

ON

ES

www.electrovoice.com

a.d.n. (Latin America)Al Davis (FOH engineer, Rev. Al Green, Lee Scratch Perry)Albert LeeAlexx CaliseAlison Hinds (Caribbean)Annie Minogue BandArizonaAsesinoAvishai CohenBill Racine (studio engineer, Mogwai,Mercury Rev, Whirlwind Heat, etc.) Black Label SocietyBlackbird McKnight (Parliament)BlackhawkBlasko (Ozzy Osbourne)Blue CountyBobby Bare Jr.Brian Herb (FOH engineer, Helmet)Bruce Reiter (FOH engineer, Static-X, Dragonforce)Captain YonderCaptured by Robots!Cesaria Evora (France)ChamptownChumley’s ToyClem Burke (Blondie)Clipp Payne (Parliament)Courtney PineCraig Schumacher (studio engineer,Neko Case, Calexico, etc.)dadaDamon Johnson (Alice Cooper)Dan Lance (FOH engineer for John Prine,Kris Kristofferson, Leon Redbone)Danny B. Harvey Dave Fridmann (Grammy Award winningrecording engineer, The Flaming Lips)Dave MustaineDave Wolfe TrioDavid FrizzellDavid Lee (Legendary Shack Shakers)Deke DickersonDevilDriverDevoDick DaleDino CezaresDJ AshbaDoug Short (FOH engineer, David Lee Roth, Slayer)Dr. DogDuane Dungey (FOH engineer, Parliament)Echo and the BunnymenEd “Mr. Improv” HullEric GalesEric TavaresFishboneGeezer Butler (Black Sabbath)George Clinton Parliament All-StarsGo Fish Gregg Rolie BandGWARHatebreedHeaven DavisHelen CorneliusHell YeahHenry Murphy and the SeahawksHerman Li (Dragonforce)

HoneydogsHoven Droven (Sweden)Jack FrostJames Lomenzo (Megadeth, Black Label Society)Jamey Jasta (Hatebreed, Headbangers Ball Host)Jeremy Smith (FOH engineer for GWAR)Jerry Montano (Hell Yeah, Danzig)Jim Baker (engineer for John Berry)Jim VilandreJimmy ClarkJimmy Keegan (Spock’s Beard)Joe BonamassaJoe Fraulob (Danzig)John BerryJohnny Hawthorn BandJohnny K (3 Doors Down, Disturbed)Johnny Kelly (Type-O-Negative, Danzig)Joshua Craig PodolskyKarl Denson’s Tiny UniverseKeith Capsuto Keith Frank Kenny Olson (Kid Rock, The Flask)Kenny Wayne ShepherdKeri NobleKerry King (Slayer)Kreg ViesselmanLarry RussellLee Scratch PerryLeroy Van DykeLos LobosLMT ConnectionLonesome SpursMaktubMarcus MillerMark Robertson (studio engineer, East Roswell Studios)Marthia SidesMeldrumMichel Montano (Caribbean)MinistryMoe BandyMogwaiNeal McCoyNick CataneseNiki BarrPete AndersonPete Shelley (Buzzcocks)Phi/BlochPresidents of the United States of AmericaProcussionsPurple ReignRafael Alkins (monitor engineer, Ricky Martin)Real Groove BandReamonn (Germany)Reverse CowgirlRichard BucknerRick WardRobosaurusRockie LynneRocky Holman (FOH engineer for John Mellencamp)Rogue WaveRupee (Caribbean)Sean Peel (FOH, Three Inches of Blood)Secret Agent Bill

SkywyndSnoop DogSouthern Culture on the SkidsStatic-XStereo FalloutSteve BrownSteve “Sonny” B. Taylor (engineer for Neal McCoy)Steve VaiT.M. StevensTerri NunnTerri WalkerTerry EvansThe Legendary Shack ShakersThe Black IrishThe BuzzcocksThe HoneydogsThe Lads (Australia)The MonksThe Reverend Al GreenThe RootsTheresa Andersson Three Days GraceThundherstruckTim Burlingame/Kathrin ShorrTim LepardTravis Larson BandTwisted SisterVibro ChampsWolf SimonYngwie MalmsteenZakk Wylde

EV® SERIESLive / Broadcast / Studio Microphones

WIR

ED

MIC

RO

PH

ON

ES

6

WIR

ED

MIC

RO

PH

ON

ES

7

The EV® Series Cardinal™ is a cardioidcondenser designed to capture the detail ofboth voice and instrument in live sound orstudio applications. Employing Class A,discrete ultra-low noise amplifier circuitry, theCardinal’s smooth and detailed performance issure to please even the most discerning artistsand engineers.

Cardinal• Pressure gradient cardioid condenser

• Class-A discrete ultra-low noise circuitry

• Unique double swivel-mounted design forideal positioning

• Innovative visual design with cherry finish

• Great for voice or instruments

The EV® Series Raven™ is a stylish dynamic microphonedesigned to capture the character of live and studiovocals. It is also the perfect microphone for live andstudio instruments. The Raven incorporates thecollaborative design work from the top industrymicrophone engineers to provide unparalleledperformance in a stunning package.

Raven• Dynamic mic with studio detail and clarity

• Cardioid pattern with excellent off-axis rejection

• Unique double swivel-mounted design forideal positioning

• Great for voice or instrument

• Innovative visual design

SPECS Cardinal Raven

Element Condenser (self-biased) DynamicPolar pattern Cardioid CardioidFrequency Response (-3 dB) 35 - 20,000 Hz 45 - 18,000 HzOpen Circuit Voltage (at 1,000 Hz) 10mV/Pascal 3.2 mV/PascalImpedance, Low-Z balanced 50 ohms 400 ohmsMaximum SPL (0.5% THD) 150dB SPL(0.5% THD) 162dB SPL(1% THD)Power requirement (Phantom power ±4V) +48 Vdc N/AIncluded accessories Stand adapter, Stand adapter,

cloth gig bag soft cloth bagConnector type 3-pin XLR 3-pin XLR

FREQUENCY RESPONSEFREQUENCY RESPONSE

RE-SERIESLive Performance Microphones

8

WIR

ED

MIC

RO

PH

ON

ES

9

The RE510 is the first choice ofmicrophones for smooth andaccurate sound reproduction.Its unique performance make ita favorite in the professionaltouring business.

RE510• Professional condenser

vocal microphone

• Selectable low-end roll-off

• Supercardioid pattern

• Excellent off-axis rejection

• Wide dynamic range

• Large diameter diaphragmfor clear, warm sound

• Warm grip handle for greatfeel and low handling noise

Element Condenser (self-biased)Polar pattern SupercardioidImpedance, Low-Z balanced 150 ohms Frequency Response (-3 dB) 50 - 20,000 HzSensitivity, open circuit voltage, 1kHz 2.5 mVEquivalent Noise (0 dB=20 micropascal) 18 dB SPLA-weightedMaximum SPL (1% distortion, 1,000 Hz) 140 dB SPL Power requirement (Phantom power) 12 - 52 VDC Specials transformerless

output deviceFilters switchable low-freq roll-offCase Material MetalFinish Warm-Grip

black handleIncluded accessories Stand adapter,

zippered vinyl carrying pouch

Connector type 3-pin XLRDimension (Length x max. Diameter) 180 x 50 mmWeight net 215 g

Element Condenser (self-biased)Polar pattern CardioidImpedance, Low-Z balanced 250 ohms Frequency Response (-3 dB) 50 - 20,000 Hz Sensitivity, open circuit voltage, 1kHz 3.2 mV Equivalent Noise (0 dB=20 micropascal)

N/DYM SERIESLive Performance Microphones

WIR

ED

MIC

RO

PH

ON

ES

10

Just listen to Static-X explain how the N/D967

performs: “The N/D967 was a real problem-solver

for us. Given the volume that the band performs at

and the kind of feedback rejection we were looking

for, there was nothing that worked for us. We then

discovered the N/D967. Wow, we were impressed.

In fact, you now see these on high-volume stages

around the world. This mic is a life-saver.”

– Bruce Reiter, FOH engineer, Static-X/Megadeth

11

Element DynamicPolar pattern SupercardioidImpedance, Low-Z balanced 150 ohmsFrequency Response (-3 dB),close response 50 - 13,000 HzFrequency Response (-3 dB),far response 120 - 13,000 HzOutput Level(0dB = 1 m W/Pascal)at 1.000 Hz - 52 dBOpen Circuit Voltage (at 1.000 Hz) 4.0 mV/PascalEquivalent Noise (0 dB=20 micropascal)A-weighted < 16 dB SPLMagnetic Circuit N/DYM®

Case Material MetalFinish Nonreflecting blackIncluded accessories Stand adapter,

soft zipperedcarrying pouch

Connector type 3-pin XLRDimension (Length x max. Diameter) 173 x 52 mmWeight net 205 g

The N/D767a is the singer and engineer’sfirst choice for outstanding vocal clarity inlive performance applications. With lowhandling noise and VOB™ technology, theN/D767a sounds more like a condensermicrophone allowing clarity through allfrequencies, reducing boominess and P-popping associated with other dynamicmics in its class. More and more performersare switching to this rugged and sonicallysuperior microphone.

N/D767 a• Top-class vocal microphone

• Multi-stage shock mount for unmatchedlow-handling noise

• Condenser-like performance

• VOB™ technology provides tailored bassresponse for controlled “proximityeffect”and exceptional vocal clarity

• Supercardioid pattern for superiorfeedback rejection and acoustic isolation

• Neodymium based magnet structureprovides greater sensitivity and signal-to-noise ratio

• Warm Grip™ handle for more comfortable feel

Element DynamicPolar pattern SupercardioidImpedance, Low-Z balanced 300 ohmsFrequency Response (-3 dB), close response 35 - 22,000 HzFrequency Response (-3 dB), far response 70 - 22,000 HzOutput Level(0dB = 1 m W/Pascal)at 1.000 Hz - 51 dBOpen Circuit Voltage (at 1.000 Hz) 3.1 mV/PascalEquivalent Noise (0 dB=20 micropascal) A-weighted < 17 dB SPLMagnetic Circuit N/DYM®

Case Material MetalFinish Nonreflecting blackIncluded accessories Stand adapter,

soft zippered carrying pouchConnector type 3-pin XLRDimension (Length x max. Diameter) 181 x 52 mmWeight net 260 g

FREQUENCY RESPONSEFREQUENCY RESPONSE

Hundreds of performers and engineersasked us for this microphone. They said:“Give us a mic that has excellent gain-before-feedback, excellent rejection ofextraneous noise like cymbals, and canreally take the high-SPL world of themetal and rap stage.” Our designengineers went out to countless showsand experienced first hand what ourcustomers were talking about… Theythen went back into the lab. Hundredsof gallons of coffee later, the engineersemerged with a godsend: the N/D967.

N/D967• Highest gain-before-feedback

performance vocal microphone

• Optimized response for liveperformance

• EV-exclusive personality switch shapes sound

• High N/DYM® sensitivity

• Unique removable front grilleassembly and pop filter for easyhygienic cleaning

• Superior multistage shock mount forunmatched low handling noise

• Warm Grip™ handle for morecomfortable feel

N/DYM SERIESLive Performance Microphones

WIR

ED

MIC

RO

PH

ON

ES

12

N/D267 a/as

Element DynamicPolar pattern CardioidImpedance, Low-Z balanced 300 ohmFrequency Response (-3 dB),close response 45 - 15,000 HFrequency Response (-3 dB),far response 100 - 15,000 HOutput Level(0dB = 1 m W/Pascal) at 1.000 Hz - 52 dBOpen Circuit Voltage (at 1.000 Hz) 2.9 mV/PascalEquivalent Noise (0 dB=20 micropascal) A-weighted < 17 dB SPLMagnetic Circuit N/DYMCase Material MetalFinish Nonreflecting blackIncluded accessories Stand adapter

soft zippered carrying pouchConnector type 3-pin XLRDimension (Length x max. Diameter) 181 x 52 mmWeight net 238 g

N/D267 a/asFREQUENCY RESPONSE

The N/D267a/as both incorporate EV’sunique VOB™ (Vocally-Optimized Bass™)technology to provide the performer withreduced resonant distortion at lowfrequencies. Critical damping of the lowfrequency resonant peak has resulted in amicrophone that replaces the “muddiness”found in competitive models with greaterwarmth and increased vocal clarity. Theincreased clarity permits greater workingdistances than other competitivemicrophones, and ensures a clean, clear,consistent sound that “punches throughthe mix.”

N/D267 a/as • VOB™ technology provides tailored bass

response for controlled “proximityeffect” and exceptional vocal clarity

• Cardioid pattern for superior feedbackrejection and acoustic isolation

• Consistent sound over greater workingdistances than competitive models

• Neodymium-based magnet structureprovides greater sensitivity and signal-to-noise ratio

• Warm Grip™ handle for more comfortable feel and low handling noise

• On/Off switch on N/D267as

13

The EV N/D367s features excellentgain-before-feedback and smooth,controlled frequency response. Thecontrolled response of the N/D367sallows the performer or speaker toeasily “work” the microphone foroptimal performance. It also features acardioid pattern for enhanced front-area sensitivity and acoustic rejectiondirectly behind the microphone,reducing feedback under liveperformance conditions. Additionally,the N/D367s’s polar patterns areunusually uniform with frequency,ensuring superior gain-before-feedback in live applications andsuperior isolation when used in thestudio. Although this is a popularchoice for both genders, it hasbecome recognized as the perfectcomplement to a woman's voice.

N/D367 s• Classic N/DYM® sound

• Smooth, controlled frequencyresponse

• High N/DYM® sensitivity

• Superior multistage shock mount for unmatched low handling noise

• Warm Grip™ handle for morecomfortable feel

• Noiseless on/off switch

• Also sounds great when used on a podium

• Cardioid pattern for excellentfeedback rejection and acousticisolation

N/D367s

Element DynamicPolar pattern CardioidImpedance, Low-Z balanced 300 ohmsFrequency Response (-3 dB),close response 25 - 20,000 HzFrequency Response (-3 dB),far response 55 - 20,000 HzOutput Level(0dB = 1 m W/Pascal) at 1.000 Hz - 53 dBOpen Circuit Voltage (at 1.000 Hz) 2.2 mV/PascalEquivalent Noise (0 dB=20 micropascal) A-weighted < 17 dB SPLMagnetic Circuit N/DYM®

Case Material MetalFinish Nonreflecting blackIncluded accessories Stand adapter,

soft zippered carrying pouchConnector type 3-pin XLRDimension (Length x max. Diameter) 181 x 52 mmWeight net 200 g

N/D367 sFREQUENCY RESPONSE

WIR

ED

MIC

RO

PH

ON

ES

14

N/DYM SERIESLive Performance Microphones

FREQUENCY RESPONSE

Designed specifically for horns, drums, acoustical and electricguitars, the N/D468 provides a smooth, natural sound,capturing the excitement of the instrument. The supercardioidpattern provides superior off-axis rejection and acousticisolation in any application. An innovative EV designharnesses the increased power of a neodymium-basedmagnet design, allowing a large-diameter voice coil (up to50% larger than other mics) for dynamic, efficient microphoneperformance. N/DYM® offers the power and clarity to “cutthrough the mix.” Whatever your instrument application, theN/D468 is sure to be a top performer.

N/D468• Designed specifically for instruments

• Supercardioid pattern for exceptional acoustic isolation andoff-axis rejection

• Unique pivoting head ensures perfect placement for use ondrums, horns, acoustic and electric guitar

• Accurate response, even in high sound pressure levels (SPL)

• Rugged steel construction for exceptional durability

15

N/D468 N/D868Element Dynamic DynamicPolar pattern Supercardioid Cardioid variantImpedance, Low-Z balanced 150 ohms 150 ohmsFrequency Response (-3 dB),close response 30 - 22,000 Hz 20 - 10,000 HzFrequency Response (-3 dB),far response 60 - 22,000 Hz —Output Level(0dB = 1 m W/Pascal)at 1.000 Hz - 51 dB - 52 dBOpen Circuit Voltage (at 1.000 Hz) 3.1 mV/Pascal 1.0 mV/PascalEquivalent Noise (0 dB=20 micropascal)A-weighted < 14 dB SPL < 17 dB SPLMagnetic Circuit N/DYM® N/DYM®

Case Material Metal MetalFinish Nonreflecting black Nonreflecting blackIncluded accessories Stand adapter, Stand adapter,

soft zippered soft zipperedcarrying pouch carrying pouch

Connector type 3-pin XLR 3-pin XLRDimension (Length x max. Diameter) 115 x 52 mm 133 x 60 mmWeight net 190 g 295 g

The N/D868 is truly a top performer in any application.Whether in a live sound or studio environment, the N/D868 isable to handle incredibly high sound pressure levels withoutdistortion or overriding the mixer input. With a responsespecifically designed to “kick”, the N/D868 can be used “asis” – no additional EQ required. Perfect for bass drum, theN/D868 has been applauded by drummers and engineers the world over.

N/D868• Designed specifically for kick drum applications in live

or studio environments; also excellent on bass guitar, floor toms, and electric guitar cabinets

• Optimized sensitivity for the high sound pressure levelsfound in bass drum micing

• Extended low frequency response

• Frequency response tailored for “plug-and-play”

• Rugged steel construction for exceptional durability

FREQUENCY RESPONSE

N/DYM SERIESLive Performance Microphones

WIR

ED

MIC

RO

PH

ON

ES

16

N/D478Element DynamicPolar pattern CardioidImpedance, Low-Z balanced 300 ohmsFrequency Response (-3 dB),close response 45 - 15,000 HzFrequency Response (-3 dB),far response 100 - 15,000 HzOutput Level(0dB = 1 m W/Pascal)at 1.000 Hz - 52 dBOpen Circuit Voltage (at 1.000 Hz) 2.9 mV/PascalEquivalent Noise (0 dB=20 micropascal)A-weighted < 17 dB SPLMagnetic Circuit N/DYM®

Case Material MetalFinish Nonreflecting blackIncluded accessories Stand adapter,

soft zipperedcarrying pouch

Connector type 3-pin XLRDimension (Length x max. Diameter) 181 x 52 mmWeight net 247 g

The N/D478’s acoustic response presentsoptimal performance in both a live sound or studio environment. VOB™ technology (Vocally-Optimized Bass™) provides theinstrumentalist with reduced resonant distortionat low frequencies. Critical damping of the lowfrequency resonant peak has resulted in amicrophone that replaces the “muddiness”found in competitive models with greaterwarmth and increased clarity. The result is anexceptional performing instrument microphonewith clean, clear, consistent sound.

N/D478 • Outstanding choice for electric guitar/bass

guitar amplifier, toms, snare, cymbals, hi-hat,brass, and acoustic guitar

• VOB™ technology provides tailored bassresponse for controlled “proximity effect” and exceptional sound clarity

• Excellent choice for micing acoustic or electricinstruments, whether in a live sound or studio environment

• Neodymium-based magnet provides greatersensitivity and signal-to-noise ratio

• Cardioid pattern for superior feedbackrejection and acoustic isolation

• Warm Grip™ handle for comfortable feel and lower handling noise

FREQUENCY RESPONSE

RE-200W

IRE

DM

ICR

OP

HO

NE

S

17

The Electro-Voice® RE200 is a cardioid,true condenser instrument microphonedesigned for the exacting acousticreproduction of choirs, strings,percussion and brass instruments in liveperformance and sound recordings.

RE200• True condenser design

• Continuous presence rise enhances sound quality

• Transformerless output

• Small, unobtrusive profile

• Includes stand clamp, windscreen and zippered vinyl pouch

• Cardioid pattern for excellent feedbackrejection and acoustic isolation

RE200Element True condenserPolar pattern CardioidImpedance, Low-Z balanced 200 ohmsFrequency Response (-3 dB) 50 - 18,000 HzSensitivity, open circuit voltage, 1kHz 10 mVEquivalent Noise (0 dB=20 micropascal) 21 dB SPLA-weightedMaximum SPL (1% distortion, 1,000 Hz) 130 dBPower requirement (Phantom power) 12 - 52 VDC Current Consumption 3.5 mAMagnetic Circuit N/ASpecials AcoustiDYM™,

transformerless output deviceFilters —Case Material MetalFinish Semi-gloss

camera blackIncluded accessories Stand adapter, windscreen Connector type 3-pin XLRDimension (Length x max. Diameter) 137 x 28 mmWeight net 185 g

FREQUENCY RESPONSE

COBALT SERIESLive Performance Microphones

WIR

ED

MIC

RO

PH

ON

ES

18

Co9 Premium Vocal Mic• Cardioid polar pattern with

excellent feedbackrejection and acoustic isolation

• Slight bass roll-off andaccentuated midrange

• Includes stand adapter andzippered vinyl carrying case

Co11 Condenser Vocal Mic• Versatile condenser

microphone, extendedfrequency response and widedynamic range

• Cardioid polar pattern withexcellent feedback rejectionand acoustic isolation

• High compliance shock mount effectively eliminateshandling noise

• Multistage pop filtereliminates breath pop noises

• Memraflex® hardened grille screen

Cobalt™ microphones offer roadworthyperformance, affordability, andergonomics – satisfying all the

microphone needs of musicians. TheCo11 is the newest addition to the line,

offering condenser performance at anaffordable price. The Co4 is ideal for a

variety of instruments and stageapplications; the other members of the

Cobalt family all provide outstandingperformance for vocal and spoken wordprogram. From the high-SPL handling of

the Co7 to the premium Co9, the Co5with its on/off switch, Cobalt provides

versatility and exemplary sound.

SPECS Co11 Co9Element Self-biased condenser DynamicPolar pattern Cardioid CardioidImpedance, Low-Z balanced Low-Z balanced (250 Ohms) 600 ohmsFrequency Response (-3 dB) 50 - 20,000 Hz 50 - 18,000 HzOpen Circuit Voltage (at 1,000 Hz) — 3.2 mV/PascalPower requirement (Phantom power) 24 to 48 Vdc N/ACurrent Consumption N/A N/AMagnetic Circuit N/A N/DYM®

Specials — —Case Material Die cast zinc Die cast zincFinish cobalt cobaltIncluded accessories Stand adapter, Stand adapter

zippered vinyl zippered vinyl carrying pouch carrying pouch

Connector type 3-pin XLR 3-pin XLRDimension (Length x max. Diameter) 170 x 53 mm 173 x 53 mmWeight net 292 g 335 g

WIR

ED

MIC

RO

PH

ON

ES

19

Co7 Crossroad Vocal Mic• Cardioid polar pattern with

excellent feedback rejection

• Excellent performance inhigh-SPL environments

• Low handling noise ideal incritical, acoustic settings

Co5 Classic Vocal Mic• Cardioid polar pattern with

excellent feedback rejection

• Designed for the performer whoprefers a careful balance ofhighs, midrange, and bass

• Exceptional vocal intelligibility

• Controlled proximity effect

• Features on/off switch

Co4 Instrument Mic• Designed to yield outstanding

performance when micing acousticand electric instruments

• Perfect for live sound and studio applications

• Applications include electric guitarand bass guitar amplifiers, toms,snare, cymbals, high-hat, brass, andacoustic guitar

Co7 Co5 Co4

Element Dynamic Dynamic DynamicPolar pattern Cardioid Cardioid CardioidImpedance, Low-Z balanced 600 ohms 600 ohms 600 ohmsFrequency Response (-3 dB) 50 - 18,000 Hz 50 - 18,000 Hz 50 - 18,000 HzOpen Circuit Voltage (at 1,000 Hz) 3.2 mV/Pascal 2.8 mV/Pascal 2.2 mV/PascalMagnetic Circuit N/DYM® N/DYM® N/DYM®

Specials — Low-noise —On/off-Switch

Case Material Die cast zinc Die cast zinc Die cast zincFinish cobalt cobalt cobaltIncluded accessories Stand adapter, Stand adapter Stand adapter,

zippered vinyl zippered vinyl zippered vinylcarrying pouch carrying pouch carrying pouch

Connector type 3-pin XLR 3-pin XLR 3-pin XLRDimension (Length x max. Diameter) 170 x 53 mm 170 x 53 mm 148 x 23 mmWeight net 332 g 306 g 340 g

RE-SERIESBroadcast / Studio Microphones

WIR

ED

MIC

RO

PH

ON

ES

20

The RE20 and RE27N/D are the first choice ofmicrophones for smooth and accurate sound

reproduction. Their unique and famous performancemakes them a favorite in the broadcast, recording studio

and live sound business. RE20 and RE27N/D microphoneswere developed with EV’s Variable-D® design to ensure

true and accurate response across all frequencies withoutthe up-close boominess associated with proximity effect.

As a result, these microphones have become the industrystandard for radio studios worldwide. And, when it comes

to studio recording or professional concert soundapplications, these mics provide you with the tools you

need to get the sound you’re after when recording vocals,guitars, drums, or brass.

WIR

ED

MIC

RO

PH

ON

ES

21

RE20• Variable-D® for minimal

proximity effect

• True cardioid with no colorationat 180-degrees off-axis

• Voice tailored frequencyresponse

• Studio condenser-likeperformance

• Large diaphragm

• Humbucking coil

• Switchable EQ (down to –4.5 dB from 400 to 100 Hz)

• Integral wind and blast filter

RE27• Variable-D® for minimal

proximity effect

• N/DYM® element designbrings 6 dB more sensitivity

• Ultra-flat frequency response

• Studio condenser-likeperformance

• Large diaphragm

• 3 selectable filters: -6 dB,250-100 Hz / -12 dB,1000-100 Hz/ -3 dB highfrequency roll-off

• Integral wind and blast filter

RE20 RE27Element Dynamic DynamicPolar pattern Cardioid CardioidImpedance, Low-Z balanced 150 ohms 150 ohmsFrequency Response (-3 dB) 45 - 18,000 Hz 45-20,000 HzPower Level (0dB = 1 mW/Pascal) - 57 dB -51 dBat 1.000 HzOpen Circuit Voltage (at 1,000 Hz) 1.5 mV/Pascal 3.1 mV/PascalEquivalent Noise (0 dB=20 micropascal) — —A-weightedMaximum SPL (1% distortion, 1,000 Hz) — —Magnetic Circuit — N/DYM®

Specials Variable-D® Variable-D®

Filters Tilt-down EQ 3 selectable EQsCase Material Steel SteelFinish Fawn beige Satin nickelIncluded accessories Stand adapter, Stand adapter,

zippered vinyl zippered vinylcarrying pouch, carrying pouch,hard-shell case hard-shell case

Connector type 3-pin XLR 3-pin XLRDimension (Length x max. Diameter) 217 x 54 mm 217 x 54 mmWeight net 737 g 709 g

FREQUENCY RESPONSE FREQUENCY RESPONSE

RE-SERIESBroadcast Microphones

WIR

ED

MIC

RO

PH

ON

ES

22

635N/D-B• Uniform 80 – 13,000 Hz

frequency response

• N/DYM® element designoffers higher output

• On-camera use with 422A desk stand

• Acoustalloy® diaphragmmaterial for very smoothresponse over a widefrequency range

• Integral windscreen andblast filter

• Black semi-gloss

RE50 B / RE50 N/D B 635A (B) 635 N/D (B)Element Dynamic Dynamic DynamicPolar pattern Omnidirectional Omnidirectional Omnidirectional

Impedance, Low-Z balanced 150 ohms 150 ohms 150 ohmsFrequency Response (-3 dB) 80 - 13,000 Hz 80 - 13,000 Hz 80 - 13,000 HzPower Level (0dB = 1 mW/Pascal) - 55 dB (-51 dB) - 55 dB - 51 dBat 1,000 HzOpen Circuit Voltage (at 1,000 Hz) — (2.0 mV/Pascal) — 2.0 mV/PascalEquivalent Noise (0 dB=20 micropascal) — — —A-weightedMaximum SPL (1% distortion, 1.000 Hz) — — —Power requirement (Phantom power) N/A N/A N/ACurrent Consumption N/A N/A N/AMagnetic Circuit Alnico (N/DYM®) Alnico N/DYM®

Specials Dyna-Damp™ — Acoustalloy®

(Dyna-Damp™ Memraflex)Filters — — —Case Material Aluminum Steel SteelFinish Semi-gloss Fawn beige (A) Semi-gloss

camera black Semi-gloss black (A/B) camera blackIncluded accessories Stand adapter zippered vinyl Stand adapter Stand adapter

carrying pouch hard-shell caseConnector type 3-pin XLR 3-pin XLR 3-pin XLRDimension (Length x max. Diameter) 197 x 49 151 x 36 mm 151 x 36 mmWeight net 269 g 170 g 170 g

You’ve seen Electro-Voice™ live interview microphones in the hands of reporters and news correspondentsaround the world – from interviews with the President of the United States to the family next door – EV’s RE50and 635A mics are famous in broadcast, television, and radio OBs (outside broadcasts). These microphones setworld standards for ENG (electronic news gathering) and EFP (electronic field production). They are extremelyrugged, withstand high humidity, temperature extremes and corrosive effects such as salt-air, while providingexcellent sound performance, and that legendary “Buchanan Hammer” durability.

635A (beige) or 635A/B (black)• Linear frequency

response

• Completely pop-freeperformance

• Four-stage pop anddust filter

• Internal effective shockabsorber

RE50B – RE50N/D B• Extremely low handling noise via Dyna-Damp™

“mic in-a-mic” shock mount system

• Impervious to wind noise and p-pops thanksto integrated four-stage pop filter, integralwind screen and blast filter

• Withstands high humidity, temperatureextremes, and corrosive salt air

• Acoustalloy® diaphragm material for verysmooth response over a wide frequency range

• N/D version offers higher output thanks toN/DYM capsule design

• No muddy lows when used near lips

• Black semi-gloss

WIR

ED

MIC

RO

PH

ON

ES

23

635A

635N/D

FREQUENCY RESPONSE

FREQUENCY RESPONSE

FREQUENCY RESPONSE

FREQUENCY RESPONSE

RE50B

RE50N/DB

RE-SERIESBroadcast Microphones

WIR

ED

MIC

RO

PH

ON

ES

24

RE16 • Variable-D® dynamic microphone,

supercardioid handheld

• Great for podium or handheld use

• Unique blast filter makes close-up use possible without popping

• Uniform response independent of angle

• Humbucking coil reduces electromagnetic hum pickup

• Bass roll-off switch

• Memraflex™ grill means screen keeps its shape

RE16Element DynamicPolar pattern Super-CardioidImpedance, Low-Z balanced Low-Z (150 Ohms nominal)Frequency Response (-3 dB) 80 - 5,000 HzOutput Level -56 dBOpen Circuit Voltage (at 1,000 Hz) —Current Consumption N/AMagnetic Circuit N/ACase Material SteelFinish Fawn beige micromatteIncluded accessories Stand adapter,

zippered vinyl carrying pouch

Connector type 3-pin XLRDimension (Length x max. Diameter) 187 x 45 mmWeight net 227 g

FREQUENCY RESPONSE

The EV® RE16 Variable-D dynamicsupercardioid microphone isdesigned for the most exactingprofessional use, employing anintegral blast filter to permithandheld and outdoor use without“P-popping” or excessive windnoise. In utilizing the Variable-Ddesign, the RE16 features adirectional characteristicindependent of frequency. This results in a microphone thatgenerates little off-axis coloration,while providing the greatestrejection of unwanted sounds. The supercardioid RE16 provides its greatest rejection at 150-degreesoff-axis; An easily-operated “bass-tilt” switch corrects spectrumbalance for boom use and otherlonger reach applications.

WIR

ED

MIC

RO

PH

ON

ES

25

ENG618Generating Element: Condenser, back electret Frequency Response: 50 - 8,000 Hz,

200Hz roll-off switchPolar Pattern: Hypercardioid-line Sensitivity, 19 mV/Pascal (Open Circuit Voltage, 1KHz)Power Level, 1kHz (0 dB = 1 mW/pascal) -55 dBClipping Level (1% THD) 120 dB SPLEquivalent Noise: 15 dB SPL, A-weightedDynamic Range: 105 dB Output Impedance, 1 kHz: 100 ohms Power Requirements: 12 - 52 V dc phantom

supply or 9V battery Current consumption: 2mA phantom, 20 mA battery

(20 hr estimated battery life) Dimensions: Length, collapsed / extended 46 cm (18 in) / 180 cm (6 ft)Diameter: 9 cm (3.5 in) Capsule diameter: 5.3 mm (0.21 in)

FREQUENCY RESPONSE

The Electro-Voice ENG618 combines a highly sensitive,hypercardioid-line (shotgun) back-electret condensermicrophones with a unique telescoping boom pole systemdesigned for broadcast news-gathering and film/videoapplications where selective pickup in a multi-soundenvironment is required. The ENG618 boom pole extendsquickly and easily for placement over or across anyobstruction with little effort. The systems lightweight designand excellent balance allows consistent audio coveragewithout fatigue, in a highly portable self-contained package.

The ENG618 offers very high sensitivity, an extremely naturalsound quality, and the hypercardioid-line design providesmaximum output from the desired sources, and excellentrejection of unwanted off-axis noise. A 200Hz, low-end roll-off switch provides additional flexibility.

The EV ENG618 - the industry's first newsworthy, integratedboom pole/shotgun microphone.

ENG618• Integrated Shotgun/Boom-pole Microphone and

built-in headphone pre-amp

• Designed for ENG/Broadcast news gathering

• Hypercardioid-line back-electret condenser microphone

• Ultra-lightweight boom-pole extends from18” to 6-ft. in length

• Operates from either phantom or battery power

WIR

ED

MIC

RO

PH

ON

ES

26

POLAR CHOICESERIESInstallation Microphones

XLR FL

The World’s ONLY

Wired and Wireless

Microphones with

Selectable Polar

Patterns.

PolarChoice, the first podiummicrophone that allows you to select the polar pattern,continues to get better.

PolarChoice is now available inseven different versions. Theseinclude the standard XLR, FL – Flange Mount, and PC Plusfor conventional, mounted podiummic installations. If a free-standingpodium mic is called for, the hard-wired PolarChoice Desktopand the one-of-a-kind wirelessPolarChoice Satellite round outthe most versatile and flexiblepodium microphone product linein the industry.

The latest addition to thePolarChoice family, thePolarChoice Boundary Satellite,expands PolarChoice’s offeringsinto the boundary style.

PC, XLR, FL, PLUS & DESKTOPElement type Back electret condenserSelectable Polar Patterns Omni, Cardioid, Supercardioid, HypercardioidImpedance 200 OhmsFrequency Response 50 Hz - 20 kHz(mic system)Open Circuit Voltage 5,6 mV/Pascal(mic system)Equivalent Noise < 26 dB SPL(A-weighted, mic system)Max. SPL >135 dB(mic system)Power requirement 24 to 52 Volt Phantom PowerCurrent Consumption 3 mAFinish Nonreflective BlackIncluded Accessories Multiport WindscreenConnector Type XLR

FREQUENCY RESPONSE

All versions of PolarChoice feature...• Selectable polar patterns

• A smooth and uniform response,no matter what pattern is selected

• Exceptional sound quality

• An extended low frequency responseand switchable high-pass filter

• EV’s exclusive Multiport™ windscreen which virtually eliminates “P” pops

WIR

ED

MIC

RO

PH

ON

ES

27

PolarChoiceSatelliteFor wireless applications.Integrated desk stand & configurable switch foruse with EV & Telexwireless beltpacks.

PolarChoiceDesktopFor wired use.Integrated deskstand & configurableswitch, with standard10’ XLR cable.

PolarChoice Boundary SatelliteThe new PolarChoice™ BoundarySatellite from Electro-Voice® isthe most flexible wirelessboundary microphone availabletoday. This unique productprovides the perfect solution forcountless applications, whilemeeting the critical demands ofcontractors, consultants andrental houses everywhere.

Features:

• Selectable polar patternsincluding Figure 8

• Easy to use on/off switchwhich is programmable andcompletely noiseless

• For use with EV and Telexbeltpack transmitters

Both Feature:

• Free-standing weighted base for reliablestability

• Exceptional sound quality with EV’s provenPolarChoice™ design

• Easy to use, programmable on/off mic switchwith mic status LED (see PC Plus for details)

• Available in three gooseneck lengths: 18”, 12” or 5”

PolarChoice PlusThe first podium microphone withthe flexibility to be installed into anyenvironment. It can be mounted viaa standard 3-pin XLR connector, orpermanently flush-mounted to thepodium or tabletop. Available in 5”,12” and 18” gooseneck lengths.

The PolarChoice® Plus also featuresan easy-to-use and programmablemicrophone mute switch

• The switch is oriented so thatanyone can use it

• Mic status LED above the muteswitch so the user can see if themic is on or off

• Configure the switch (via easy toset switches) to be either pushon/off or push-to-mute

PC SATELLITE & BOUNDARY SATELLITEElement Back electret condenserPolar patterns – Satellite Omni, Cardioid, Super-Card, Hyper-CardPolar patterns – Boundary Omni, Cardioid, Super-Card, Figure 8Impedance, Low-Z balanced 200 ohmsFrequency Response (-3 dB) 75 - 15,000 HzPower Level (0dB=1 m W/Pascal) at 1,000 Hz - 44 dBOpen Circuit Voltage (at 1,000 Hz) 5.6 mV/PascalEquivalent Noise (0 dB=20 micropascal) < 28 dB SPLA-weightedMaximum SPL (1% distortion, 1,000 Hz) 130 dBPower requirement 5 V DC from BeltpackCurrent Consumption 2.8 mAFinish Nonreflecting black Connector type TA4F

RE-SERIESInstallation Microphones

WIR

ED

MIC

RO

PH

ON

ES

28

RE90P• Gooseneck podium

microphone; available in 12- and 18-inch formats

• Uniform frequency response and polar pattern

• Strutted, yet flexible, ultra-thin gooseneck

• Features EV’s exclusive newMultiport™ windscreen, whichvirtually eliminates “P” pops

RE90H• Available in black as RE90H;

in white as RE90HW

• Hanging microphone

• Internal pre-amp

• Very uniform polar pattern

• Includes installation guide

RE90 P RE90 HElement Back electret condenser Back electret condenserPolar pattern Cardioid CardioidImpedance, Low-Z balanced 200 ohms 200 ohmsFrequency Response (-3 dB) 70 - 15,000 Hz 75 - 15,000 HzPower Level (0dB=1 m W/Pascal) at 1,000 Hz - 43 dB - 30 dB-Open Circuit Voltage (at 1,000 Hz) 4.5 mV/Pascal 27 mV/PascalEquivalent Noise (0 dB=20 micropascal) < 28 dB SPL < 25 dB SPLA-weightedMaximum SPL (1% distortion, 1,000 Hz) 130 dB 120 dBPower requirement (Phantom power) 9 - 52 VDC 9 - 52 VDCCurrent Consumption 2.5 mA 2.0 mASpecials transformerless external pre-amp

output deviceCase Material Steel SteelFinish Nonreflecting black Low-gloss blackIncluded accessories Windscreen, double-sided tape 760 cm braided cableConnector type 3-pin XLR 3-pin XLRDimension P-12: 281 x 6.4 mm 37 L x 13 D mm

P-18: 443 x 6.4 mmWeight net P-12: 400 g 157 g

P-18: 528 g

FREQUENCY RESPONSEFREQUENCY RESPONSE

WIR

ED

MIC

RO

PH

ON

ES

29

RE92 H

Element Back electret condenserPolar pattern CardioidImpedance, Low-Z balanced 250 ohmsFrequency Response (-3 dB) 40 - 20,000 HzPower Level (0dB=1 m W/Pascal) -at 1,000 Hz

Open Circuit Voltage (at 1,000 Hz) 5.6 mV/PascalEquivalent Noise < 30 dB SPL (A-weighted)(0 dB=20 micropascal) A-wdMaximum SPL >135 dB(1% distortion, 1,000 Hz)Power requirement (Phantom power) 24 to 52 V Phantom PowerCurrent Consumption 6 mASpecial external preamp

output deviceCase Material SteelFinish Nonreflecting black or whiteIncluded accessories mounting hardwareConnector type 3-pin XLRDimension 10.5 mm D x 32.1 mm L

(mic only)Weight net 240 g total

FREQUENCY RESPONSE

The wide frequency response of the RE92H picks upeverything from the bass to the sopranos, while thecardioid pattern makes sure that nothing extraneousgets into the performance. The mic features a 25 ft.cable, and is terminated in an in-line amp module.The RE92H’s XLR output provides an ultra-low noisefloor, a 12 dB/octave switch-able high pass filter, anda transformer-less differential output to drive longcable runs.

RE92H• Available in black as RE92H, in white as RE92HW

• Wide, smooth frequency response

• Cardioid polar pattern

• In-line electronics module

• 12 dB/octave switchable high pass filter

• Transformerless differential output to drive long cables

RE92L

WIR

ED

MIC

RO

PH

ON

ES

30

RE-SERIESInstallation Microphones

RE92LThe RE92L is based on a great-sounding newcardioid microphone element. This capsule features a broad and smoothfrequency response for a warm and natural sound,a tight cardioid polar pattern for excellent off-axisrejection, and extremely low noise to give a cleanand unadulterated sound.

The RE92L is the hardwired counterpart of the TXversion and is intended for spoken wordapplications. The RE92L features the same wideand smooth frequency response, well-controlledcardioid polar-pattern, while its 4-ft. cable isterminated into an in-line amplifier with XLRoutput. The amp features a 12 dB/octave switch-able high-pass filter for rolling off low frequencynoise, and its transformer-less differential outputeasily drives longer cable runs.

Accessories include:

• Two-stage mic wind-screen

• Both single and dual mic tie clips

• Amp housing belt clip

• Zippered gig-bag.

FREQUENCY RESPONSE

WIR

ED

MIC

RO

PH

ON

ES

31

RE90B

RE-SERIESInstallation Microphones

RE90B• Boundary layer

• Available in black as RE90B, in white as RE90BW

• Ultra-thin profile (16 mm) housing with rubbernon-slip bottom pad and strong steel screen

• Internal terminal block for disconnecting cable to insert thru holes

• Integrated pop filter

• Ideal working angle 60-degrees off-axis

Boundary Satelite RE90 B RE90 L RE92 LElement Dual condenser, Back electret condenser Back electret condenser Back electret condenser

Back electretPolar pattern Omnidirectional (Half-) Cardioid Omnidirectional Cardioid

Cardioid, SupercardioidImpedance, Low-Z balanced 1 kHz, 1000 ohms 200 ohms 100 ohms 250 ohmsFrequency Response (-3 dB) 50 - 20,000 Hz 80 - 15,000 Hz 50 - 18,000 Hz 40 - 20,000 HzPower Level (0dB=1 m W/Pascal) at 1,000 Hz — - 33 dB - 34 dB - 34 dBOpen Circuit Voltage (at 1,000 Hz) 17.8 mV/Pascal 25 mV/Pascal 12.6 mV/Pascal 5,6 mV/PascalEquivalent Noise (0 dB=20 micropascal) < 26 dB SPL < 25 dB SPL < 29 dB SPL < 30 dB SPL A-weightedMaximum SPL (1% distortion, 1,000 Hz) 130 dB 127 dB 130 dB >135 dBPower requirement (Phantom power) 5 VDC 9 - 52 VDC 9 - 52 VDC 24 to 52 V Phantom PowerCurrent Consumption < 1.5 mA 2.5 mA 1.0 mA 6 mASpecials transformerless external pre-amp external preamp

output deviceCase Material — Heavy-duty zinc diecast Polycarbonate resin —Finish Nonreflecting black Nonreflecting black or white Nonreflecting black Nonreflective black or whiteIncluded accessories — — Gig bag, tape mounting hardwareConnector type TA4F 3-pin XLR 3-pin XLR 3-pin XLRDimension 141 L x 81 W x 50 H mm 128 L x 94 W x 16 H mm 6 L x 5 D mm 10.5 mm D x 24.1 mm L Weight net 128 g 358 g 34 g 160 g total

RE90L• Ultra-miniature condenser lavalier microphone

for inconspicuous attachment

• Internal preamp and XLR termination

• Omnidirectional polar pattern provides cleansound and uniform response

• Complete assortment of clips

• Perfect for television, business and worship applications

RE90LFREQUENCY RESPONSE FREQUENCY RESPONSE

GENERAL PURPOSEMicrophones

WIR

ED

MIC

RO

PH

ON

ES

32

WIR

ED

MIC

RO

PH

ON

ES

33

649B The popular omnidirectional dynamic lavalier microphone has been an industrystandard for many years. Its frequency response is tailored for balancedperformance in the lavalier chest position. The turned aluminum case andnested mechanical parts assure rugged durability. The 649B is also used inindustrial applications.

785 Family Gooseneck Paging MicsA low-impedance, gooseneck microphone for single-zone paging. Designed forapplications where ruggedness, dependability and durability are the mainrequirements. Microphone housing is constructed of die-cast zinc alloy to standup to the toughest abuse and conditions. Features a recessed aluminum grillewith windscreen and a durable satin-chrome finish. All units include a heavy-duty, 3-hole mounting flange and an extra-strength 16-inch flex arm of steeltubing. SR785LN/O includes a push button switch with normally “open”switching. SR785L – Same as SR785LN/O except without normally “open”switching; 785L – Same as SR785LN/O except without a switch.

US690 Gooseneck MicA 12-inch flexible gooseneck microphone. Features N/DYM® magnet structuresthat provide up to 6 dB more sensitivity than conventional designs. A dynamiccardioid, the US690 terminates with an XLR-type connector and plug-in mount.Rugged design and mic element make the US690 ideal for the mostdemanding applications where good sound is required.

US600EL PTT Hand MicA hand microphone designed for maximum noise rejection in high ambientareas and effective use without “close talking” techniques. An excellent choicefor critical communication applications, US600EL is built to withstand roughusage and atmospheric extremes. US602FL – A hand microphone featuringclear speech transmission in high ambient noise level environments, convenientgrip-to-talk activation and noise-canceling dynamic design. Perfect for police,marine and mobile paging applications.

NC450D & 450D PTT Hand MicsA dynamic paging hand microphone. NC450D’s noise-canceling design makesit particularly effective for use in noisy locations and excellent voice responsecharacteristics make it a good choice in quiet areas as well. Output impedanceis 200 ohms for matching low impedance input circuits. A push-to-talk switch islocated on the molded ABS microphone housing. A soft rubber lip guardassure user of correct microphone-to-mouth positioning. 450D – Same asNC450D except without noise-cancellation. Molded Cycolac® housing inpebble-grain black finish and unterminated black neoprene coil cord relieved atthe housing by spring-type strain relief.

WP300 & WP300S Wall Plate MicsA dynamic, omnidirectional wall plate microphone. Ideal fro securitymonitoring, fast-food and retail outlets, warehouses and public usageapplications. WP-300S mounts on standard electrical, single-gang wall boxes.The housing of each unit is an aluminum assembly on a steel outlet plate with abrushed, satin-chrome finish. The assembly is complete with rubber shockmount. Includes a double-pole, double-throw switch for push-to-talk and lineshorting capabilities. WP300 – Same as WP-300S except without the double-pole, double-throw switch.

WIR

ED

MIC

RO

PH

ON

ES

34

TxA

326

ACCESSORIES

379-1 (black)376 (grey) 379-2 (red)

TxA The Electro-Voice® model TXA is a microphone accessory designedto enable the use of lavalier, head-worn, and other TA4F-terminatedElectro-Voice professional microphones in a wired configuration.Powering microphones using standard phantom power through theTXA ensures the same high quality audio performance that youexpect using Electro-Voice microphones over wireless systems. See page 48 & 49 for all EV lavalier and headworn mics which canbe worn with the TXA.

422A Desk stand with rubber shock mount – accepts mic stand clamps, black

309A Suspension shock mount for RE20, RE27, black

323S Mic stand clip for 1.0 inch diameter microphones (RE50, BK-1), black

311 Mic stand clamp for all EV 3/4-inch diameter microphones(635A, RE16, RE200, N/D468), black

MSA-COI Stand clamp for Cobalt® Co4 instrument microphone, black

320 Stand clamp for RE20, RE27, N/D868

376/379 Windscreen pop filter, 376 – gray, 379 – 1 black, 379 – 2 red

CPSM Shock mount for RE90P and PolarChoice™ gooseneck mics, black

368 Drum mic mounting clamp (N/D468, N/D478), black

314E (not shown) Windscreen pop filter for user with 635 series mics, gray

326 326 Mic stand clamp for all NDYM and Cobalt handheldmicrophones

422A

309A

323S

CPSM

368

311MSA-COI

320

35

TECHNICAL INFO

Variable-D®

Normal microphones generate increased bottom end whenused close up. This is typically called the “proximity effect”.While some lead vocalists like this effect and use it toenhance their performance, it is attainable only in close-upsituations. When the distance between the microphone andthe source is extended, the sound quality changesdramatically. Electro-Voice’s patented Variable-D® eliminatesthis disadvantage. On the rear side of the diaphragm thereis a perforated pipe (interference duct) with precise sonicslots at set distances. The duct provides maximum dampingthat is completely uncolored and undistorted at 180°off-axis, ensuring the same frequency response as if thesource was nearly on-axis.

Variable-D® designed microphones can be used very closeto other sound sources with no loss in clarity or definition.This makes them the preferred choice for tight vocals andchallenging instruments such as brass. Variable-D®

microphones like the RE20 and RE27 are favorites withbroadcast show hosts, vocal booths, voice-over studios, andprofessional touring or rental companies.

VOB™

Electro-Voice’s unique VOB™ technology (Vocally-OptimizedBass™) reduces low-frequency distortion in the microphone’soutput. Critical damping of the low-frequency resonantpeak results in a microphone that replaces the “muddiness”found in competitive models with greater warmth andincreased vocal intelligibility. With a wider range of workingdistances than other microphones, this intelligibility ensuresa clean, clear, consistent sound that “cuts through the mix”.

VOB™ counteracts proximity effect, sibilance, and P-popping, thus assuring maximum vocal intelligibility andmusical clarity.

In 1934, Electro-Voice® invented the hum-bucking coil for microphones, which isstill an industry standard almost 70 years later. The invention was the beginning ofEV’s success in building microphones, but not the end. Electro-Voice continues toset new standards for microphone design today. Electro-Voice was the firstmanufacturer to use neodymium-based magnet structures (N/DYM®) in itsmicrophones, thus achieving higher output and condenser-like qualities such ascrystal clarity and reliable performance. Electro-Voice’s goals in developingmicrophone technologies have always been the same: providing the highestsound quality, achieving better and more comfortable handling for the user, andcontinuing the company’s tradition of legendary reliability and warranty support.EV’s long list of patents attest to its success in meeting these goals.

WIR

ED

MIC

RO

PH

ON

ES

WIR

ED

MIC

RO

PH

ON

ES

36

GUIDELINESMicrophone Techniques

WIR

ED

MIC

RO

PH

ON

ES

37

General Microphone Use Guidelines

1. Always point the microphone at the desired source and away from the sources ofany unwanted sound.

2. The microphone should be located close to the sound source to minimizeinterference from other potential sound sources.

3. Use the 3-to-1 rule when using multiple microphones: place each microphonethree times farther away from other microphones as it is from the desired soundsource. (If the microphone is 1 foot away from the sound sources, it should be3 feet away from the next closest microphone).

4. Minimize over-handling of the microphone to reduce unwanted mechanical noise.

5. Positioning the microphone close to the sound source will increase gain-beforefeedback and will also increase the bass tone of the signal.

Microphone Techniques for Musical Instruments

Miking techniques are a matter of personal preference. These are merely guidelines to assistin the placement of the microphone to achieve optimal performance.

Usage Best Mic Placement & Suggested EV Mic Usage

SNARE DRUM Place mic 1-3” above the heads, 1-2” in from the rim. aim eachmic at the top head angled down 45 degrees. If the drum rings,tape deadening material to the head or use damping rings. for more “snare” sound, place a second mic under the drumaimed up a the bottom head.Suggested mics: N/D478, N/D468, Co4.

ELECTRIC GUITAR Place microphone approximately 1-2” from and at a 90 degreeangle to the speaker cone. To reduce boominess, move the bassmicrophone off axis to the cone from 90 degrees to 45 degrees,or move mic from center of cone to the edge.Suggested Guitar Amplifier Mics: RE20, N/D868, N/D468,Co4, Raven

TOM-TOMS On double-headed toms, place mic 1-3” over the top of the drumhead at a 45-degree angle to the drum surface and 1/2" from thedrum edge. On single headed toms, use above method or placemic inside tom from underneath at a 90-degree angle from thecenter of head, 3-5” away.Suggested mics: N/D468, for floor tom – RE20, N/D868

CYMBALS Place microphone one to two feet above the top of cymbals.Suggest mcs: RE200, Cardinal

HIGH-HAT Place 5” above outside edge at a 45-degree down angle.Suggested mics: RE200

BRASS 6-24” away, and on axis with the bell of the instrument.Suggested mics: RE20, Co4, N/D468, Raven

ACOUSTIC GUITAR Place mic 6-12” from where finger board joins the body.Suggested mics: N/D468, N/D478, Co4, RE20, RE200, Cardinal

WIR

ED

MIC

RO

PH

ON

ES

38

HM 2 HM 7 ENG 618 OLM 10 ULM 21

N/D 767A

RE 20 RE 27 RE 16 RE 50B/NDB

RE 635A RE 97TX RE 92TX RE 90TX RE 92L/H RE 90L/H RE 90P RE 90B

HM

2

HM

7

ENG

618

OLM

10

ULM

21

RE20

RE27

RE16

RE50

B/ND

BRE

635A

RE97

TX

RE92

TX

RE90

TX

RE92

L/H

RE90

L/H

RE90

P

RE90

B

Dynamic X X X X XCondenser X X X X X X X X X X X X

Supercardioid X XCardioid X X X X X X X X X(half) XOmni X X X X XShotgun X

StageLead Vox, female XLead Vox, male XBacking Vox XSpeech X

Kickdrum XSnare XToms XHiHat /Overhead XPercussion X

Guitar Amp XBass Amp XAcoustic Guitar XUpright Bass X

Strings X

Piano XAccordion X

Woodwinds XBrass X

StudioBoardrooms / Podiums X X X X(H-Version) X(H-Version) X(H-Version) XBoundary XSpeech / Broadcast X X X X X X X XInterview X X X X XSpeech Lav. / Head Set X X X X X X X X(L-Version) X(L-Version) X(L-Version)

Vocals XKickdrum X XSnare X XToms XHiHat /Overhead XPercussion X

Guitar Amp XBass Amp X XAcoustic Guitar XUpright Bass X X

Strings X

Piano XAccordion X X

Woodwinds X XBrass X X

EV MICROPHONEApplication Table

39

RE 920 RE 510 RE 410 N/D 967

N/D 367S N/D 267A(S) N/D 868 N/D 478 N/D 468

Cardinal

Raven

Cobalt Co11 Cobalt Co09

Cobalt Co07 Cobalt Co05 Cobalt Co04

RE 200 Polarchoice

H Card

inal

Rave

n

RE20

0

RE92

0

RE51

0

RE41

0

N/D

967

N/D

767A

N/D

367S

N/D

267A

(S)

N/D

868

N/D

478

N/D

468

Coba

ltCo

11Co

balt

Co09

Coba

ltCo

07Co

balt

Co05

Coba

ltCo

04Po

larc

hoic

e

X X X X X X X X X X X X

X X X X X X X

X X X X X X X X X X X X

X X X X X X X X

X

X X X X X X X X

X X X X X X X X X X

X X X X X X X X X X X X

X X X X X X X

X

X X X X

X X X X

X X X X X

X X X X X X X

X X X X X X

X

X X X X X

X

X X X X X

X X X X

X X X X X

X X X X X X X

X X X X X

X

X X

X

X

X

X X

X

X

X X

X

X X

X X

X X X

X X X

WIR

ELE

SSM

ICR

OP

HO

NE

S

40

WIRELESS MICROPHONES

41

INTRODUCTION

Why Choose a Telex/EV Wireless?All EV and Telex wireless systems are designed and built to exactingstandards in our Lincoln, Nebraska facility. That’s right – made here in theU.S. State-of-the-art manufacturing techniques are employed in eachwireless product, from the initial CAD design to the advanced auto-insertedsurface mount printed circuit board assembly. Every Telex/EV system istested as individual components and as a complete system to ensurereliable field performance.

Telex/EV wireless microphone products are supported from the factory inLincoln, Nebraska as well as authorized centers in Canada, Germany,Singapore, and Hong Kong.

Telex/EV has been in the business of providing quality wirelesscommunications for demanding professional events for almost thirty years.We have the experience and talent to solve any wireless need. When youare designing large multiple wireless installations, you can look to Telex/EVto provide the important frequency coordination, and system accessoriesfor a turnkey installation.

Key Strengths• Designed, built and supported in the USA

• Part of Bosch Communications Systems Solutions – EV Speakers & Amps, KT Processing, Midas Mixing, Telex Intercom

• ClearScan™ the original and best scanning technology on the planet

• Patented Posi-Phase® true diversity for dropout-free audio with thebest range in the business

• Complete variety of models and accessories to fit almost anyapplication or size of install

• Designed and built for maximum professional performance

• Superior design, construction and warranty

WIR

ELE

SSM

ICR

OP

HO

NE

S

42

RE-2UHF Wireless Microphone System

RE-2 Receiver• One touch Auto-ClearScan™

• Programmable in 25kHz steps across 28 MHz operatingbandwidth

• Backlit LCD displays the Group, Channel, Frequency,transmitter battery level, diversity operation, and RF andAudio signal level meters

• Balanced XLR audio output for Microphone or Line levelsignals and a 1/4-inch line level jack

• Fourth generation Posi-phase™ diversity and advancedaudio circuits

• Unique “Guitar” setting

• Detachable 1/4-wave antennas

RE-2 UHF Transmitter• Unique “smart” battery

• LCD Displays Group and Channel, Frequency, or Battery Level

• Low battery LED

• One On/Off button that also acts as a mute

• On/Off button can be disabled

RE-2 UHF Handheld• Available with four different microphone elements

• N/DYM 267a Dynamic element

• N/DYM® 767a Dynamic premium vocal microphone withVOB™ (Vocal-Optimized Bass™)

• RE410 cardioid condenser

• RE510 supercardioid condenser

• Internal 1/2-wave antenna

RE-2 UHF Bodypack• Cell phone style beltclip

• Optional pouches and fixed clip available

• A wide selection of lapel and headworn microphoneaccessories available

RE-2 UHF systems provide groups of up to 10 simultaneous,harmonized channels per frequency bands. Besidesindividual components, following complete sets, includingtransmitter and receiver are available:RE2-N2 Receiver + N/D267a handheld transmitterRE2-N7 Receiver + N/D767a handheld transmitterRE2-410 Receiver + RE410 handheld transmitterRE2-510 Receiver + RE510 handheld transmitterRE2-G Receiver + bodypack transmitter + MAC-G3

guitar cordRE2-BP Receiver + bodypack transmitterRE2-L10 Receiver + bodypack transmitter +OLM10

lavalier micRE2-L21 Receiver + bodypack transmitter +

ULM21lavalier micRE2-E Receiver + bodypack transmitter + RE97

headworn mic (beige or brown)RE2 Combo Receiver + N/D267a handheld + bodypack

transmitter + ULM21 lavalier mic

Whether you’re broadcasting from the local rock club, lecturing ata corporate seminar, or speaking in a house of worship, theElectro-Voice® RE-2™ brings ease-of-use, clear sound, and cleanchannels to wireless.

Where does the performing musician, corporate speaker, orreligious leader for professional sound? To Electro-Voice®, acompany that has over 25 years of experience in wirelessinnovations. The RE-2 wireless system takes frequency agility to awhole new level – professional power with previously unmatchedsimplicity. You can also be assured that there will be nointerference, drop-outs, or compromised audio quality. Simplypress the one-touch Auto-ClearScan™ button and the receiverfinds the clearest channels in seconds. That’s it. You do your jobas a professional performer, without the hassle and headacheassociated with many other wireless systems.

WIR

ELE

SSM

ICR

OP

HO

NE

S

43

RECEIVER

Front

Back

HANDHELD

Front

Top

Front

RE-2 ReceiverReceiver Type Synthesized PLLFrequency Range (RF) A Band 648 – 676 MHz (TV Channels 43 - 48)

B Band 696 – 724 MHz (TV Channels 51 - 56)Number of Channels 1112 possible channels

Programmable in 25 kHz stepsModulation +/- 40 kHz Diversity Digital Posi-Phase™ True DiversityRF Sensitivity < 1.0 uV for 12 dB SINADImage Rejection > 60 dBSquelch Tone Code plus AmplitudeUltimate Quieting > 100 dBFCC Certification Approved under Part 15Power Requirements 12 V AC/DC 300 mA Antennas Detachable 1/4 waveDimensions 1.72” H x 7.50” W x 5.9” D

43.69 cm H x 190.50 mm W x 150 mm D

Audio ParametersFrequency Response 50 – 15 kHz +/- 2 dBBalanced Output (max @ 40 kHz deviation)Mic Position -10 dBV Line Position Adjustable 10 mV-2V RMSUnbalanced Output Adjustable 10 mV-1V RMSDistortion 100 dB A Weighted Dynamic Range >100 dB

Transmitters, Bodypack (BPU-2), Handheld (HTU-2)Radiated Output 30 mW typicalMicrophone Head N/D 767a SupercardioidElectro-Voice 767a N/DYM DynamicMicrophone Head N/D 267a Versatile Electro-Voice 267a Cardioid DynamicMicrophone Head RE 410 Electro-Voice RE 410 Classic Cardioid condenserStandard Lavalier Microphone EV RE 90Tx MicroMini™

Omni-Directional CondenserTA4 Connector Wiring Pin 1: Ground; Pin 2 Mic Input;

Pin 3: +5V bias; Pin 4: +5V bias through a 3kW resistor

Audio Gain Adjustment 40 dB (handheld 26 dB)Power Requirements 9 Volt Alkaline BatteryBattery Life (Typical) > 8 hours with 9-Volt Alkaline TypicalBodypack Antenna Flexible external 1/4 waveHandheld Antenna Internal 1/2 waveDimensions (Handheld) 9.4 in. (24.0 cm) LongDimensions (Bodypack) 3.8 in. H x 2.6 in. W x 0.92 in. D

96.5 mm H x 66 mm W x 23.4 mm D

REVProfessional Wireless Microphones

WIR

ELE

SSM

ICR

OP

HO

NE

S

44

REV-PH Presentation Handheld• A tough high impact ABS shell using the new RC2

interchangeable microphone elements provides anexcellent alternative handheld for rental houses and otherusers at a lower price point.

• Accessible on/off switch that also acts as a mute, great forpauses in presentations and worship services.

• On/off button can be disabled to prevent accidentalturnoffs during a performance.

• One 9V battery powers the REV-PH for over eight hours ofcontinuous use and the Smart-Battery™ feature meansthere is no way to put the battery in wrong.

REV Single & Dual ReceiverOptimized analog audio path developed to provide the

truest representation of a wired microphone soundpossible in a wireless system.

• REV-Link™ PC software for remote monitoring, control andprogramming over a CAN bus connection through a UCC-1 converter or Netmax N8000.

• Factory set channel groups allow up to 16 systems tooperate simultaneously in one frequency band. For groupsup to 44 systems, EV can help with the coordination andcustom groups are easily programmed.

• Advanced ClearScan™, automatic group and channelselections for quick, simple setup.

• Backlit LCD Display shows the Sound Engineer theGroup/Channel, transmitter battery status, diversityoperation, RF and Audio level meters, and space for acustom name

• REV-D Dual Receiver includes antenna pass through jacksso up to six receivers can be connected to just twoantennas. All required cables are included.

• Specially designed “Sound Check” mode provides theability for one person to walk test the microphone in theperformance space with tangible results.

• Patented DSP Posi-Phase™ Diversity System for maximumrange and audio quality.

• Guitar mode matches the optimized instrument audio withthe REV-BP bodypack.

• Internal universal switching power supply, headsetmonitoring jack, and DC power on antenna input jacks foroptional RF amplifier

• Integrated rack mount ears and front mount antennacables included.

• Three-Year Limited Warranty.

Electro-Voice® has been at the forefront of wireless microphonetechnology since the ’80s. In the ‘90s EV invented the firstscanning wireless, EV® NRU, and in 2002 EV reinvented wirelesswith the professional RE-1, currently on tour with Zakk Wylde,Gretchen Wilson, the Reverend Al Green, Parliment, Static-X, andMegadeth, to name just a few. Now Electro-Voice establishes awhole new paradigm in professional wireless with the REV.

REV concert handheld• A rugged, fully machined aluminum handle

about the size and shape of a wiredmicrophone encourages proper microphonetechnique for better performances.

• Interchangeable microphone RC2 head allowsa choice of elements to fit the vocalist’s styleand environment. Microphone choicesinclude: — N/DYM® 767a, N/DYM 967, RE-410, RE-510

• Backlit LCD display controlled by three buttonsmounted out of harm’s way inside the batterycompartment. Battery level gauge alwaysvisible on the LCD display..

• RF transmit power (5 or 50mW) and audio gainare controlled from the LCD screen controls,no tools required.

• Two AA batteries power the REV-H for over tenhours of continuous use.

REV-BP Bodypack Transmitter• Cast magnesium case is extremely light and

durable with a cell phone style beltclip or flatmetal clip for comfortable wearing options.

• Backlit LCD display and three control buttonsmounted inside the battery housing makeprogramming a channel or frequency is quickand easy.

• Software controlled Guitar mode switches in a20dB pad, moves the low end response downto 30Hz and changes the audio circuit tooptimized guitar mode.

• One on/off switch that also acts as a mute,great for pauses in presentations and worshipservices but it can be disabled to preventaccidental turnoffs during a performance.

• Unique Smart-Battery circuit means there is noway to put the 9V battery in wrong.

• Battery level gauge always visible on the LCDdisplay. Low battery LED will light when thebattery needs a replacement.

• RF transmit power (5 or 50mW) and audio gainare controlled from the LCD screen controls,no tools required.

45

WIR

ELE

SSM

ICR

OP

HO

NE

S

775555005500GG PP CC HH

RR EE VV--BB PP

RR

dual receiver

POWE R

I/O

s et

menu

s elect

channel

1 2

cha nnel 1monitor

s et

menu

channel 2

S ingle receiver

POWE R

I/O

monitor

s et

menu

channel

DUAL R E CE IVE R

AUDIO 2

MADE IN U.S .A .

OUT IN

ANTENNA

AUDIO 1 POWER90-260 VAC 50-60 Hz

12 Vdc150 mAOut

PATE NT NO. 6,256,484

HIGHZ

HIGHZ

OUT IN

ANTENNA

12 Vdc150 mAOut

B ALANCED B ALANCED

R E V-DREMOTE

CANBUS

S E R IAL NO.

R E CE IVE R

AUDIO

MADE IN U.S .A .

ANTE NNA

POWE R90-260 VAC 50-60 Hz

PATENT NO. 6,256,484

HIGHZB ALANCED

R E V-SANTENNA

S E R IAL NO.

R EMOTE

CANBUS

755050

RR

755050

RR

REV Front and Rear Panel

REV BodyPack REV-H REV-PH

REV-S SINGLE AND REV-D DUAL RECEIVERSFront Panel Controls : On/Off, Menu, Set, Up, Down Buttons

1/4” Headset Jack with Selector and VolumeIndicators LCD: Group, Channel, Diversity, Label, Set-upBacklit Display: Menu-driven dot matrixBack Panel Connectors: 1/4” unbalanced adjustable line level outputXLR balanced mic/line level output RJ-45 CAN interface (x2, parallel)Antennas: Detachable 1/2 waveRF Specifications Frequency Range:

C1 Band 614 – 638 MHz (TV Channels 37-41)C2 Band 650 – 674 MHz (TV Channels 44-47)C3 Band 674 – 698 MHz (TV Channels 48-51)C5 Band 722 – 746 MHz (TV Channels 56-59)

Number of Channels: 950 possible (programmable in 25kHz steps)Diversity: DSP PosiPhase™ True DiversitySquelch: Tone Code plus Adjustable AmplitudeReceiver Type: Synthesized PLL Agile UHFRF Sensitivity: 110 dB (A)Dynamic Range: >100 dBREV-D Antenna Output: TNCPowered Antenna Inputs: 12Vdc,15mAInternal Switching Power Supply: Universal Cord, 90–240 VAC, 50–60 HzCAN Bus Monitoring & Control: REV-Link SoftwareSize: 1.72” H x 16” W x 12” D

43.7 mm H x 406.4 mm W x 304.8 mm DREV-H CONCERT HANDHELDControls: Power On/Off, Set, Up, Down ButtonsDisplays: Backlit LCD display showing: Battery Level,

Channel/Group or FrequencyBattery Life: 10 hours with two AA alkaline typicalAntenna: Internal ProprietaryMicrophone Elements: EV N/D 767a or N/D 967 Dynamic

EV RE510 or RE410 CondenserCase Material: Machined AluminumRF Output: Normal: 5 mW typical

High: 50 mW typicalSize: 24.8cm (9.75 in.) x 52mm (2.04 in.)

(Length x max diameter):REV-BP BODYPACK TRANSMITTERControls: Power On/Off, Set, Up, Down ButtonsIndicators: Red LED Low Battery Indicator, Back litLCD display showing: Battery Level, Channel/Group, or FrequencyBattery Life: 8 hours with 9V alkaline typicalAntenna: External 1/4 wave detachableConnector: TA4F input for microphone Pin 1 ground,

Pin 2 Mic input Pin 3 +5V Bias,Pin 4 +5V through 3k ohm

RF Output: Normal: 5 mW typicalHigh: 50 mW typical

Case Material: Cast MagnesiumSize: 3.75 in. H x 2.6 in. W x 0.9 in. D

94 mm H x 66 mm W x 23 mm D

RE-V ACCESSORIES AND PARTSModel #

Omnidirectional MicroMini™ Lapel Mic: RE90TX Unidirectional MicroMini™ Lapel Mic: RE92TX Lightweight omni headworn Mic: RE97TX Headworn Cardioid Condenser Mic: HM7 1/2 Wave Rx Antenna (C3 and C5 Bands): FA-1 1/2 Wave Rx Antenna (C1 and C2 Bands): CLA-3 1/2 Wave Antenna Bracket: AB-2 UHF Antenna Amplifier (520 - 806 MHz): UAA-500 Antenna /Pwr Distribution (600-780 MHz): APD4+ Termination Plug For APD4+: TP-2 Directional Rx Antenna (450-900 MHz): LPA-500Low Loss Coaxial Antenna Cable 25 – 100ft: CXU-XXXBodypack Pouch: WP-1000 Guitar Cord: MAC-G2 767a Dynamic Head: RC2-767 967 Dynamic Head: RC2-967 RE410 Condenser Head: RC2-410 RE510 Condenser Head: RC2-510 Mic Stand Adapter: MSA-REV

RE-2 PRO SERIESProfessional Wireless Microphones

WIR

ELE

SSM

ICR

OP

HO

NE

S

46

WIR

ELE

SSM

ICR

OP

HO

NE

S

47

Transmitters, Bodypack (BPU2PRO) and handheld (HTU2PRO) Additional FeaturesRadiated Output Normal 5 mW / High 50 mW typicalInterchangeable Microphone Heads 767a Supercardioid N/DYM Dynamic

967 Supercardioid N/DYM DynamicRE 410 Cardioid Condenser

RE 510 Supercardioid CondenserBodypack Antenna Detachable Flexible external 1/4 waveHandheld Antenna Internal 1/2 waveDimensions, Handheld (L) mm 268 mm longDimensions, Bodypack (H x W x D), mm 96.5 x 66,0 x 23.4 mm, Cast Magnesium

RE-2 Pro Receiver• All of the great RF and Audio features of

the RE-2 receiver plus all of the rackhardware to install it including frontmount antenna cables.

RE-2 Pro HandheldTransmitter• All of the great features of the RE-2

handheld plus Normal/High transmitpower, detachable microphone heads,and a choice of 767a, 967, RE410 orRE510 mic heads.

RE-2 Pro BodypackTransmitterAll of the great features of the RE-2transmitter plus a cast magnesium metalhousing, detachable antenna andNormal/High transmit power.

When applications like rentals, on locationbroadcasts, or tough environments call fora wireless microphone with a mix of RE-1and RE-2 features, the answer is RE-2PRO. The advanced features of the RE-1transmitter platforms allow more systemsin one location, longer range, moremicrophone head choices, and highquality materials like the cast magnesiumbodypack. Match the RE-2 transmitter andreceiver and the RE-2 PRO system offersprofessional wireless at a price pointbetween the RE-1 and RE-2.

FMC-K

RM-D

RM-S

EV ACCESSORIESWireless Microphones

WIR

ELE

SSM

ICR

OP

HO

NE

S

48

Use any EV lapel or headwornmic wired with a TXA.See page 34.

OLM 10• Lavalier mic

• Includesaccessories(shown)

ULM 21• Lavalier mic

• Includesaccessories(shown)

RE 90 TX• Lavalier mic

• Top-class

• Ultra-miniature

• Includesaccessories(shown)

RE92 TX• Lavalier mic

• High-Performance

• Includesaccessories(shown)

HM 2• Headset mic

• Includesaccessories(shown)

HM 7• Headset mic

• Top-class

• Super light weightand comfortable

• Includesaccessories (shown)

SPECS OLM 10 ULM 21 RE 90 TX RE92 TX HM 2 HM 7

Element Back electret Back electret Back electret Back electret Back electret Back electretcondenser condenser condenser condenser condenser condenser

Polar pattern Omnidirectional Cardioid Omnidirectional Cardioid Cardioid Supercardioid

Frequency Response (-3 dB) t.b.a. 80 – 16.000 Hz 50 - 18.000 Hz 40 – 20.000 Hz 30 - 18.000 Hz (12mm) 100 - 15.000 HzOutput Level (0dB = 1mW/Pascal) --- --- --- --- --- ---1.000 Hz)Open Circuit Voltage (at 1.000 Hz) t.b.a. 2.5 mV/Pascal 12.6 mV/Pascal 5.6 mV/Pascal 4.0 mV/Pascal 7.0 mV/PascalMaximum SPL (THD) t.b.a. 120 dB (1% THD). 130 dB (1% THD) 135 dB (1% THD) 120 dB (1% THD) 120 dB (3% THD)Power requirement from Bodypack from Bodypack from Bodypack from Bodypack from Bodypack from Bodypack(Phantom power)Current Consumption t.b.a. t.b.a. --- t.b.a. max. 0.5 mA @ 9 VDC ---Specials --- --- Sub-miniature replaceable element --- Ultra-lightweightCase Material Plastic Plastic Polycarbonate resin Metal Plastic Plastic(Capsule enclosure)Finish All Nonreflecting black Included accessories approx. 180 cm approx. 180 cm approx. 180 cm approx. 180 cm approx. 120 cm approx. 120 cm

permanently attached permanently attached permanently attached detachable permanently attached permanently attachedcable, windscreen, cable, windscreen, cable, windscreen, cable, windscreen, cable, windscreen, cable, windscreen,universal tie clip universal tie clip universal tie clip, tie tac universal tie clip cable clip cable clip

Optional Accessories --- --- --- --- --- ---Connector type 4-pin TA4F 4-pin TA4F 4-pin TA4F 4-pin TA4F 4-pin TA4F 4-pin TA4FDimension (Length x Diameter) t.b.a. 0.71 x 0.29 in. 0.25 x 0.19 in. 0.948 x 0.412 in. --- ---Weight net t.b.a. 23g 14 g 25g 25 g 70 g

SPECS RE920 TX RE97 TX

Element Back electret Back electretcondenser condenser

Polar pattern Cardioid Omnidirectional

Frequency Response (-3 dB) 80 – 18kHz. 40 – 20kHz Open Circuit Voltage (at 1.000 Hz) 1.3mV/Pascal 5.6 mV/Pascal Maximum SPL (THD) >148 dB 135 dB (1% THD)Power requirement from Bodypack from Bodypack(Phantom power)Current Consumption

WIR

ELE

SSM

ICR

OP

HO

NE

S

49

RE97-2 TX• Two sided band for stability

• Same mic element as RE97

• Available in beige, black and brown

• Can be worn on left or right side

RE97 TX Mini Mic• Extremely lightweight

earworn microphone

• Almost invisible

• Available in beige, brownand black

• Wear on left or right ear

• Omnidirectional for smooth,natural sound

RE920 TX• Unidirectional horn mic

• High SPL handling

• Custom clip for mounting

EV ACCESSORIESWireless Microphones

WIR

ELE

SSM

ICR

OP

HO

NE

S

50

EV Wireless Accessories - Antennas etc.

APD-4+ UHF Antenna/power distribution system (provides power and RF signals for 4 units) for use with RE-2, RE-1, and REV

RM-S Rack-mount kit - works with RE-2 Receivers

RM-D Rack-mount kit - double (for two receivers) works with RE-2

UAA-500 Wideband RF Antenna Amplifier for use with REV, APD-4+, and CDR-1000

AB-2 Universal mounting bracket for 1/2-wave antennas, with 10-foot coax cable

LPA-500 Directional log periodic antenna with mountinghardware and 10-foot coax

FA-500 1/2-wave UHF antenna

TP-2 50 ohm TNC termination plug for use with APD-4+

CXU-X Low-loss coax cable (X designates length, 25ft = 8 m, 50ft = 16 m)

APD-4+

AB-2

FA-500

TP-2

CXULPA-500

RM-D

UAA-500

WIR

ELE

SSM

ICR

OP

HO

NE

S

51

RC2

RC767A

RC967

RC410 RC510AN-FLEX

AN-SFLEX

MAC-2

379-1

HHCK

MAC-G3MAC-G2

MSA

WP1000

BC1000

RC967 NDYM 967 Dynamic Microphone Element for RE-1/RE2PRO

RC410 RE410 Condenser Microphone Element for RE-1/RE2PRO

RC767a NDYM 767a Dynamic Microphone Element for RE-1/RE2PRO

RC510 RE510 Condenser Microphone Element for RE-1/RE2PRO

AN-Flex Replacement Antenna for RE-1/RE2PRO bodypack transmitter

AN-Sflex Optional super flexible antenna for RE-1/RE2PRO bodypack transmitter

MSA Microphone Stand Clip for RE-2 (use MSA-1000 for RE-1/RE2PRO)

BC-1000 Swivel Beltclip and mounting stud for RE-1/RE2PRO

BC2-Clip (not shown) Swivel Replacement beltclip and mounting stud forRE-2 Bodypack

WP-1000 Leather bodypack pouch for use with WT-1000

HHCK Handheld Color Kit for RE-1/RE-2/REV-PH handheld transmitters, 6 colors

379-1 Windsceen for all handheld microphone elements

MAC-2 XLR to TA4F adapter cord

MAC-G3 TA4 to 1/4” plug George L’s Guitar cord for RE-2, straight plug only.

MAC-G2 TA4 to 1/4” plug George L’s® Guitar Cord for RE-1, REV,also includes right angle plug

RC2 RC2-767 NDYM 767a Dynamic Microphone Element for REV-H and PHRC2-967 NDYM 967 Dyanmic Microphone Element for REV-H and PHRC2-410 RE410 Cardioid Condenser Mic Element for REV-H and PHRC2-510 RE510 Supercardioid Condenser Mic Element for REV-H and PH

TELEX FMR-500Power, Performance, Flexibility

WIR

ELE

SSM

ICR

OP

HO

NE

S

52

The new HT-500 programmable handheldmicrophone transmitter is the smallestTelex has ever built. It features an LCDdisplay and has a screw-on battery coverthat also hides a controls. Choose the EV®

N/D767a dynamic microphone or the EVRE410 condenser microphone for highquality vocal performance.

The WT-500 bodypack transmitter featuresa cell phone style beltclip, dual latchingbattery door, and a TA4 connector with awide variety of lapel and headwornmicrophone options. The combination ofsound and RF features are hard to beat attwice the price.

The FMR-500 brings professional features and performance to the small- andmedium-sized wireless microphone installs that are so popular today. Onetouch Auto ClearScan™ selects the clearest channel in the clearest group ofcompatible channels in just seconds with the push of just one button.

FMR-500

• Up to 10 systems can operatesimultaneously from the presetgroups of channels in oneoperating band. Groups of 20coordinated channels betweenthe three bands are also present.

• Advanced ClearScan™ and onetouch Auto ClearScan automaticgroup and channel selections forquick and easy system setup.

• Completely programmable in25kHz steps across 28MHz for1112 possible frequencies.

• Backlit receiver LCD display showsthe Group/Channel, Frequency,transmitter battery status, diversityoperation, and RF and Audio level meters.

• Balanced XLR audio output forMicrophone or Line levelsignals and a 1/4-inch line leveljack to match any application.

• Fourth generation Posi-Phase™dive