Intro.to Computer

Embed Size (px)

Citation preview

  • 7/29/2019 Intro.to Computer

    1/28

    1

    Introduction to Computers

    Muhammad Faisal

    Siddiqi

  • 7/29/2019 Intro.to Computer

    2/28

    2

    What Is A Computer?

    A computer is an electronic device, operatingunder the control of instructions (software)stored in its own memory unit, that canaccept data (input), manipulate data(process), and produce information (output)from the processing. Generally, the term is

    used to describe a collection of devices thatfunction together as a system.

  • 7/29/2019 Intro.to Computer

    3/28

    3

    Devices that comprise a computer system

    Printer(output)

    Monitor(output)

    Speaker(output)

    Scanner(input)

    Mouse(input)

    Keyboard(input)

    System unit

    (processor, memory)

    Storage devices(CD-RW, Floppy,Hard disk, zip,)

  • 7/29/2019 Intro.to Computer

    4/28

    4

    What Does A Computer Do?

    Computers can perform four generaloperations, which comprise the information

    processing cycle.

    Input

    Process

    Output Storage

  • 7/29/2019 Intro.to Computer

    5/28

    5

    Data and Information All computer processing requires data, which is a collection of

    raw facts, figures and symbols, such as numbers, words,images, video and sound, given to the computer during the

    input phase. Computers manipulate data to create information. Information

    is data that is organized, meaningful, and useful.

    During the output Phase, the information that has been createdis put into some form, such as a printed report.

    The information can also be put in computer storage for futureuse.

  • 7/29/2019 Intro.to Computer

    6/28

    6

    Why Is A Computer So Powerful? The ability to perform the information

    processing cycle with amazing speed.

    Reliability (low failure rate). Accuracy.

    Ability to store huge amounts of data and

    information. Ability to communicate with other computers.

  • 7/29/2019 Intro.to Computer

    7/287

    How Does a Computer Know

    what to do? It must be given a detailed list of instructions,

    called a compute program or software,

    that tells it exactly what to do. Before processing a specific job, the

    computer program corresponding to that jobmust be stored in memory.

    Once the program is stored in memory thecompute can start the operation by executingthe program instructions one after the other.

  • 7/29/2019 Intro.to Computer

    8/288

    What Are The Primary

    Components Of A Computer ? Input devices.

    Central Processing Unit

    (containing the controlunit and thearithmetic/logic unit).

    Memory.

    Output devices. Storage devices.

  • 7/29/2019 Intro.to Computer

    9/289

    Input Devices Keyboard.

    Mouse.

  • 7/29/2019 Intro.to Computer

    10/28

    10

    The Keyboard

    The most commonly used input device is thekeyboard on which data is entered bymanually keying in or typing certain keys. Akeyboard typically has 101 or 105 keys.

  • 7/29/2019 Intro.to Computer

    11/28

    11

    The Mouse

    Is a pointing device which is used to controlthe movement of a mouse pointer on thescreen to make selections from the screen. A

    mouse has one to five buttons. The bottom ofthe mouse is flat and contains a mechanismthat detects movement of the mouse.

  • 7/29/2019 Intro.to Computer

    12/28

    12

    The Central processing Unit

    The central processing unit (CPU) containselectronic circuits that cause processing tooccur. The CPU interprets instructions to thecomputer, performs the logical and arithmeticprocessing operations, and causes the inputand output operations to occur. It isconsidered the brain of the computer.

  • 7/29/2019 Intro.to Computer

    13/28

    13

    Memory

    Memory also called Random Access Memoryor RAM (temporary memory) is the mainmemory of the computer. It consists ofelectronic components that store dataincluding numbers, letters of the alphabet,graphics and sound. Any information stored inRAM is lost when the computer is turned off.

    Read Only Memory or ROM is memory that isetched on a chip that has start-up directionsfor your computer. It is permanent memory.

  • 7/29/2019 Intro.to Computer

    14/28

    14

    Amount Of RAM In Computers

    The amount of memory in computers istypically measured in kilobytes or megabytes.One kilobyte (K or KB) equals approximately

    1,000 memory locations and one megabyte(M or MB) equals approximately one millionlocations A memory location, or byte, usuallystores one character.

    Therefore, a computer with 8 MB of memorycan store approximately 8 million characters.One megabyte can hold approximately 500pages of text information.

  • 7/29/2019 Intro.to Computer

    15/28

    15

    Output Devices

    Output devices make the informationresulting from the processing available foruse. The two output devices more commonlyused are the printer and the computerscreen.

    The printer produces a hard copy of youroutput, and the computer screen produces asoft copy of your output.

  • 7/29/2019 Intro.to Computer

    16/28

    16

    Storage Devices

    Auxiliary storage devices are used to storedata when they are not being used inmemory. The most common types of auxiliary

    storage used on personal computers arefloppy disks, hard disks and CD-ROM drives.

  • 7/29/2019 Intro.to Computer

    17/28

    17

    Floppy Disks

    A floppy disk is a portable, inexpensivestorage medium that consists of a thin,circular, flexible plastic disk with a magnetic

    coating enclosed in a square-shaped plasticshell.

  • 7/29/2019 Intro.to Computer

    18/28

    18

    Structure Of Floppy Disks Initially Floppy disks were 8-inches wide, they then

    shrank to 5.25 inches, and today the most widelyused folly disks are 3.5 inches wide and can typically

    store 1.44 megabytes of data. A folly disk is a magnetic disk, which means that it

    used magnetic patterns to store data.

    Data in floppy disks can be read from and written to.

    Formatting is the process of preparing a disk forreading and writing.

    A track is a narrow recording band that forms a fullcircle on the surface of the disk.

  • 7/29/2019 Intro.to Computer

    19/28

    19

    Disks Storage

    The disks storage locations are divided into pie-

    shaped sections called sectors.

    A sectors is capable of holding 512 bytes of data. A typical floppy stores data on both sides and has 80

    tracks on each side with 18 sectors per track.

  • 7/29/2019 Intro.to Computer

    20/28

    20

    Hard Disks Another form of auxiliary storage is a hard disk. A

    hard disk consists of one or more rigid metal platescoated with a metal oxide material that allows datato be magnetically recorded on the surface of theplatters.

    The hard disk platters spin at a high rate of speed,typically 5400 to 7200 revolutions per minute (RPM).

    Storage capacites of hard disks for personalcomputers range from 10 GB to 120 GB (one billionbytes are called a gigabyte).

  • 7/29/2019 Intro.to Computer

    21/28

    21

    Compact Discs A compact disk (CD), also called an optical disc, is a

    flat round, portable storage medium that is usually4.75 inch in diameter.

    A CD-ROM (read only memory), is a compact discthat used the same laser technology as audio CDs forrecording music. In addition it can contain othertypes of data such as text, graphics, and video.

    The capacity of a CD-ROM is 650 MB of data.

  • 7/29/2019 Intro.to Computer

    22/28

    22

    Computer Software

    Computer software is the key toproductive use of computers.

    Software can be categorized intotwo types:

    Operating system software Application software.

  • 7/29/2019 Intro.to Computer

    23/28

    23

    Operating System Software

    Operating system software tells the computerhow to perform the functions of loading,storing and executing an application and howto transfer data.

    Today, many computers use an operatingsystem that has a graphical user interface(GUI) that provides visual clues such as icon

    symbols to help the user. MicrosoftWindows 98 is a widely used graphicaloperating system. DOS (Disk OperatingSystem) is an older but still widely used

    operating system that is text-based.

  • 7/29/2019 Intro.to Computer

    24/28

    24

    Application Software

    Application Software consists of programsthat tell a computer how to produceinformation. Some of the more commonly

    used packages are:

    Word processing

    Electronic spreadsheet

    Database

    Presentation graphics

  • 7/29/2019 Intro.to Computer

    25/28

    25

    Word Processing

    Word Processing software is used to create and printdocuments. A key advantage of word processingsoftware is that users easily can make changes indocuments.

  • 7/29/2019 Intro.to Computer

    26/28

    26

    Electronic Spreadsheets

    Electronic spreadsheet software allows the user to

    add, subtract, and perform user-defined calculationson rows and columns of numbers. These numberscan be changed and the spreadsheet quicklyrecalculates the new results.

  • 7/29/2019 Intro.to Computer

    27/28

    27

    Database Software

    Allows the user to enter, retrieve, and update data inan organized and efficient manner, with flexibleinquiry and reporting capabilities.

  • 7/29/2019 Intro.to Computer

    28/28

    28

    Presentation Graphics

    Presentation graphic software allows the user to

    create documents called slides to be used in makingthe presentations. Using special projection devices,the slides display as they appear on the computerscreen.