WWW.INTSOK.COMFebruary 2012

Equipment and systems for offshore oil & gas field developmentsA catalogue of Norwegian based suppliers and service providers

SubseaUmbilicalsRisersFlowlines

2

3

Introduction 4

Capability Matrix 6

Detailed capabilities by category 8

4Subsea AS 12

ABB AS 13

AGR Facilities Solutions AS 14

Aker Solutions 15

Apply Nemo AS 16

AS Connector 17

Bredero Shaw Norway AS 18

ClampOn AS 19

CRE8 Systems AS 20

Deep Sea Anchors AS 21

DEEPOCEAN AS 22

Det Norske Veritas 23

DOF Subsea AS 24

EMAS AMC 25

Fedem Technology AS 26

FMC Technologies 27

FORCE Technology Norway AS 28

Framo Engineering 29

GE Oil & Gas 30

GRENLAND GROUP AS 31

Institute for Energy Technology 32

IKM Subsea 33

IKM Testing AS 34

iSURVEY Group 35

KONGSBERG Oil & Gas Technologies 36

MARINTEK 37

(Norsk Marinteknisk Forskningsinstitutt AS) 37

Multi Phase Meters AS (mpm) 38

Nexans Norway AS 39

A S NYMO 40

Parker Maritime 41

PG Pump Solutions (Ing Per Gjerdrum AS) 42

Presens 43

Proserv Norge AS 44

REINERTSEN AS 45

Roxar 46

Safetec Nordic AS 47

Sandvik Riser Technology AS 48

Scanmudring AS 49

Siemens Oil & Gas Subsea Solutions 50

SPT Group 51

Subsea 7 52

Technip in Norway 53

Techno Dive AS 54

TESS as 55

Trelleborg Offshore Norway AS 56

Vector AS 57

Contents

4

Under-water facilities for oil and gas production are gener-ally referred to using a subsea prefix, such as subsea well, subsea tree, subsea manifold, etc. Together with the engineering, manufacturing and installation of umbilical’s, risers, and flowlines, as well as associated services, this scope is often abbreviated as “SURF”.

Subsea production systems can be used to develop entire reservoirs, or parts of reservoirs (flanks), early production systems, satellite developments, infill drilling, brownfield optimization etc, which require drilling of wells from more than one location. Deep water conditions can inherently dictate development of a field by means of a subsea pro-duction system.

SURF systems will play an increasing role as fields are to be developed in deeper and more remote areas – as well as when developing marginal fields – smaller deposits are to be tied back to fixed or floating hubs covering larger areas.

The below graph shows some major trends in the develop-ment of offshore oil and gas fields. Compared with fixed platform solutions, development solutions applying floaters and or SURF solutions will be increasingly important. There will be a doubling of the offshore oil service market from 2010 to 2016 and offshore E&P spending will reach US$ 1 trillion in 2030. Today, development solutions containing floaters and SURF (subsea) covers roughly 40% of offshore field developments – increasing to 60% in 2030 when tie-backs will drive growth in the subsea market by 4 times in the period 2012–2030.

Scale Million US$

Introduction

1 000 000SubseaFloaterFixed

1991

1994

1997

2000

2003

2006

2009

2012

2015

2018

2021

2024

2027

2030

800 000

600 000

400 000

200 000

0

Reference: Rystad Energy 2011: INTSOK Market Report

5

SURF CatEgoRIESThe development and operations of subsea oil and gas fields require suppliers and service providers for:

• Engineering & Technical Services: Subsea and SURF technology is a highly specialized field of application with particular demands on Engineering & Technical Services; covering service elements from flow assurance simula-tions and studies, pipeline and subsea design to detailed installation and tie-in studies.

• Subsea production systems: These can range in complexity from a single satellite well with a single flowline tied back to a fixed platform or an onshore installation, to several wells on a template or clustered around a manifold, and transferring to a fixed or floating facility e.g. FPSO, or directly to an onshore installation. Subsea Production Systems include seabed located hardware, from wellheads and X-mas trees to templates, manifolds and connection

systems for flowlines and risers, as well as potential subsea power, separation and boosting systems. Also spe-cialized equipment like tooling for installing and maintaining the systems and working over the wells are included.

• Umbilicals, Risers & Flowlines: are hardware elements that are required to connect the subsea systems to top-side systems of a floating production unit.

• Marine operations and intervention: The installation of hardware and servicing it throughout its life cycle requires marine installation and/or intervention vessels. The ser-vicing requires deployment of tooling from an intervention vessel.

This SURF catalogue is a description of Norwegian based suppliers and service providers, providing equipment and systems for subsea field developments sorted in the above categories.

6

Engineering & technical Services Subsea Production Systems

Umbilicals & Flowlines

Marine operations, Intervention & Subsea

ServicesS

ubse

a E

ng.

Pip

elin

e E

ng.

Tech

nica

l A

naly

sis

Pro

duct

ion

Ser

vice

s

Tree

Sys

tem

s

Con

trols

&

mea

sure

men

ts

Sub

sea

Faci

litie

s

subs

ea

Pro

cess

ing

Sub

sea

Pow

er

Dis

t.

Tool

ing

Um

bilic

als

Ris

ers

&

Flow

lines

Sea

bed

surv

eys

& L

ight

In

terv

entio

nS

eabe

d In

stal

latio

n

Pip

elay

ing

Wel

l In

terv

entio

n

4 SubseaABBAGR Facilities Solutions ASAker SolutionsApply NemoAS ConnectorBredero ShawClampOnCRE8DeepOceanDeep Sea AnchorsDNVDOF SubseaEMAS AMCFedem TechnologyFMC TechnologiesFramo EngineeringForce TechnologyGE Oil & GasGrenland GroupInstitute for Energy TechnologyI surveyIKM SubseaIKM Testing ASKongsberg Oil & Gas

Capability Matrix

7

Engineering & technical Services Subsea Production Systems

Umbilicals & Flowlines

Marine operations, Intervention & Subsea

ServicesS

ubse

a E

ng.

Pip

elin

e E

ng.

Tech

nica

l A

naly

sis

Pro

duct

ion

Ser

vice

s

Tree

Sys

tem

s

Con

trols

&

mea

sure

men

ts

Sub

sea

Faci

litie

s

subs

ea

Pro

cess

ing

Sub

sea

Pow

er

Dis

t.

Tool

ing

Um

bilic

als

Ris

ers

&

Flow

lines

Sea

bed

surv

eys

& L

ight

In

terv

entio

nS

eabe

d In

stal

latio

n

Pip

elay

ing

Wel

l In

terv

entio

n

MARINTEKMPMNexansNymoParker MaritimePG Pump SolutionsPresensProServeReinertsen RoxarSafetecSandvik Riser TechnologyScanmudring ASSiemensSPT GroupSubsea 7Technip NorgeTechno Dive TessTrelleborgVector International

8

Engineering & technical Services Subsea Production Systems

Umbilicals & Flowlines

Marine operations, Intervention & Subsea

ServicesS

ubse

a E

ng.

Pip

elin

e E

ng.

Tech

nica

l A

naly

sis

Pro

duct

ion

Ser

vice

s

Tree

Sys

tem

s

Con

trols

&

mea

sure

men

ts

Sub

sea

Faci

litie

s

subs

ea

Pro

cess

ing

Sub

sea

Pow

er

Dis

t.

Tool

ing

Um

bilic

als

Ris

ers

&

Flow

lines

Sea

bed

surv

eys

& L

ight

In

terv

entio

nS

eabe

d In

stal

latio

n

Pip

elay

ing

Wel

l In

terv

entio

n

Category Company – Scope of supply – services

Engineering & technical Services

1. Subsea Engineering, Field development studies, FEED, detail engineering.

2. Pipeline Engineering & tie ins

3. technical analysis; Flow assurance analysis, integrity analysis, risk analysis.

4. Production Services, Flow management, condition & performance monitoring.

• 4subsea: 3: Technical analysis, structural analysis of flexible risers, rigid riser and wellhead systems, integrity management of flexible rigid riser, and wellhead systems. 4: Flexible riser annulus condition monitoring, Marine/WO riser operating guidelines.

• ABB: 1: Subsea engineering, FEED. 3: Technical analysis. 4: Production services, flow management, condition & performance monitoring

• AGR Facilities Solutions: 1: Subsea systems-studies & engineering. 2: Pipeline engineering. 3: Flow assurance analysis.

• Aker Solutions: 1: Subsea systems - studies & engineering including power, separation, compression and boosting systems. 2: Tie ins. 3: Flow assurance analysis. 4: Production services, flow management, condition & performance monitoring.

• Apply Nemo: 1: Early phase studies, detail design. 2: Pipeline engineering & tie ins. 3: Structural analysis, SE analyses, risk analysis.

• DNV: 2 & 3: Technical analysis and studies, pipeline integrity management, technology qualification, risk analysis, development of technical standards.

• Fedem Technology: 3: Conductor, wellhead and riser studies and integrity analysis, condition monitoring and lifetime assessment of offshore structures.

• FORCE Technology Norway: 3: Technical analysis, structural, riser, pipeline, integrity management & specification, technology qualification, risk management.

• FMC Technologies: 1: Subsea systems - studies & engineering. 4: Flow management. • Framo Engineering: 1: Pumping and compression - studies & engineering. 4: Production system

design and operability, condition monitoring. • GE Oil & Gas: 1: Subsea systems - studies & engineering. 3: Flow assurance analysis, risk analysis.

4: Flow management, condition & performance monitoring.• Institute for Energy Technology (IFE): 3 & 4: Corrosion prediction and inhibitor testing. Liquid

content measurement of gascondensate pipelines.• Kongsberg Oil & Gas: 3 & 4: Software for Flow assurance modelling (Leda Flow) and flow assurance

service. Start-up/ transient simulation studies, Operator Training Simulators and online Production Management Systems. Riser integrity management.

• MARINTEK: 3: Technical analysis, structural analysis of risers and pipelines.• Reinertsen: 1: Subsea systems – studies and engineering of subsea infrastructure. 2: Pipeline

engineering & tie-ins – including topside modifications, technical analysis, studies to detail design of structures, pipelines, flowlines, risers, and umbilicals.

• Safetec: 3: Integrated risk and asset management.• Siemens: 1:Field lay-out planning, planning and procedures for subsea operations, FEED studies,

detail engineering.• SPT Group: 3: Flow assurance software and services, Multiphase flow analysis. 4: Online flow

assurance systems.• Technip Norge: 1: Subsea engineering, field development studies, FEED, detail engineering. 2:

4:Pipeline engineering and tie-ins.

Detailed capabilities by category

9

Category Company – Scope of supply – services

Subsea Production Systems 1. tree Systems;

Wellheads, X-mas trees & completion and workover system

2. Controls & Measurement, Termination, all electric subsea systems.

3. Subsea Facilities, Manifolds / templates/ riser-bases/ protection structures/pipeline end terminations (PLET).

4. Subsea Processing; Separation, pumping, gas compression.

5. Subsea Power Distribution

6. tooling, Tools for tie in, intervention and IMR tools.

• ABB: 2: Control & measurements. 5: Subsea Power distribution, subsea electrification.• Aker Solutions: 1,2,3,4,5 & 6: EPC provider of Total Subsea Systems.• Apply Nemo: 3: EPC provider of tie-in systems, PLEM/PLETs, riser bases, manifolds, hot-tap tees &

wyes, spools, protection covers, subsea marinisation of process equipment. 6: Tools for tie-in, handling and intervention equipment and repair tooling.

• ClampOn: 2: Provider of subsea sand and corrosion measurement.• CRE8: 1: Intervention & workover control systems. 2: Wellhead Control Panels.• FMC Technologies: 1, 2, 3, 4 & 6: EPC provider of total subsea systems.• Force Technology: 2: Corrosion Protection Equipment.• Framo Engineering: 2, 3, 4 & 6: EPC provider of subsea pumping, boosting gas compression

Systems, subsea pump control systems, subsea production manifolds.• GE Oil & Gas: 1, 2, 3, 4, 5 & 6: EPC provider of Total Subsea Systems.• Grenland Group: Fabricator of 3: subsea facilities. 4: Processing systems.• IKM Testing: 1 & 3: Mechanical completion and commissioning service.• MPM: 2: Provider of subsea multiphase and wetgas meters. • Kongsberg Oil & Gas: 3. Provider of riser bases, PLETs and PLEMs • Nymo: Fabricator of 3: subsea facilities. 4: Processing systems.• PG Pumps Solutions: 4: Subsea pumping.• Presens: 2: Provider of pressure and temperature instruments.• Proserv: 1, 2, 3 & 4: Commissioning service, testing and flushing.• Reinertsen: 3: EPC provider of subsea facilities.• Roxar: 2: Provider of instrumentation for production and flow assurance monitoring.• Sandvik Riser Technology: 1: Completion and workover risers.• Siemens: 2: Subsea control system. 4: Subsea gas compressor. 5: Subsea power systems, Electro-

Hydraulic and fibre optical distribution. 6:Connection systems.• TESS: 2: Hydraulic Flying Leads, bundles and short lengths Subsea Umbilicals.• Trelleborg: 3: Provider of thermal insulation of subsea facilities.

Engineering & technical Services Subsea Production Systems

Umbilicals & Flowlines

Marine operations, Intervention & Subsea

ServicesS

ubse

a E

ng.

Pip

elin

e E

ng.

Tech

nica

l A

naly

sis

Pro

duct

ion

Ser

vice

s

Tree

Sys

tem

s

Con

trols

&

mea

sure

men

ts

Sub

sea

Faci

litie

s

subs

ea

Pro

cess

ing

Sub

sea

Pow

er

Dis

t.

Tool

ing

Um

bilic

als

Ris

ers

&

Flow

lines

Sea

bed

surv

eys

& L

ight

In

terv

entio

nS

eabe

d In

stal

latio

n

Pip

elay

ing

Wel

l In

terv

entio

n

10

Category Company – Scope of supply – services

Umbilicals & Pipelines;

1. Umbilicals; Cables & terminations.

2. Risers & flowlines Steel and flexible tie-in systems.

• ABB: 1: Power Cables.• Aker Solutions: 1: Provider of umbilical. 2: Provider of top tension production risers for TLPs.• AS Connector.: 2: Provider of pipeline connectors.• Bredero Shaw: 2: Applier of thermal insulation.• EMAS-AMC: 2: Provider of reelable steel risers/ flowlines• IKM Testing: 1 & 2: Pre-commissioning service.• Marintek: 1 & 2: Component qualification testing of flexible risers, umbilicals and power cables.• Nexans: 1: Provider of umbilical and cables.• Sandvik Riser Technology: 2: Sandvik ClikLoc® connector technology.• Subsea 7: 2: Provider of reelable stel flowlines.• Technip Norge: 1 & 2: Provider of flexible risers/flowlines, umbillicals and steel flowlines.• Trelleborg: 2: Provider of thermal insulation, fire- and corrosion protection for risers.• Vector International: 2: Provider of compact flanges & stress joints.

Engineering & technical Services Subsea Production Systems

Umbilicals & Flowlines

Marine operations, Intervention & Subsea

ServicesS

ubse

a E

ng.

Pip

elin

e E

ng.

Tech

nica

l A

naly

sis

Pro

duct

ion

Ser

vice

s

Tree

Sys

tem

s

Con

trols

&

mea

sure

men

ts

Sub

sea

Faci

litie

s

subs

ea

Pro

cess

ing

Sub

sea

Pow

er

Dis

t.

Tool

ing

Um

bilic

als

Ris

ers

&

Flow

lines

Sea

bed

surv

eys

& L

ight

In

terv

entio

nS

eabe

d In

stal

latio

n

Pip

elay

ing

Wel

l In

terv

entio

n

11

Engineering & technical Services Subsea Production Systems

Umbilicals & Flowlines

Marine operations, Intervention & Subsea

ServicesS

ubse

a E

ng.

Pip

elin

e E

ng.

Tech

nica

l A

naly

sis

Pro

duct

ion

Ser

vice

s

Tree

Sys

tem

s

Con

trols

&

mea

sure

men

ts

Sub

sea

Faci

litie

s

subs

ea

Pro

cess

ing

Sub

sea

Pow

er

Dis

t.

Tool

ing

Um

bilic

als

Ris

ers

&

Flow

lines

Sea

bed

surv

eys

& L

ight

In

terv

entio

nS

eabe

d In

stal

latio

n

Pip

elay

ing

Wel

l In

terv

entio

n

Category Company – Scope of supply – services

Marine operations, Intervention & Subsea Services

1. Seabed Surveys & Light Intervention, ROV based installation & IMR, diving

2. Seabed installation of subsea hardware incl. lifting

3. Pipelaying of flowlines, installation of risers & umbilical, incl. trenching and dredging

4. Well intervention

• 4subsea: 1: Wellhead fatigue monitoring, flexible riser repair system.• Aker Solutions: 1, 2, 3 & 4: Seabed surveys, light intervention, ROV based for installation & IMR, well

intervention.• AS Connector: 2: Provider of pipeline repair system including engineering preparations.• Deep Ocean: 1 & 2: Service provider of pipeline inspection, installation, construction support, seabed

mapping and IMR.• Deep Sea Anchors: 2: Anchor installation for various purposes. 3: Pipeline initiation.• DNV: 3: Marine warranty surveyor, technical analysis and verification.• DOF Subsea: 1 & 2: Service provider of offshore survey, seabed mapping, IMR, construction support

& installation.• EMAS-AMC: 1,2,3 &4: Installation and IMR contractor, Provider of Well Intervention Services• FMC Technologies: 4: Light well intervention services. • IKM Subsea: 1: Provider of ROV systems.• Kongsberg Oil & Gas: 3: Provider of Ancillary equipment/installation aids for pipelines• iSURVEY: 1: Subsea positioning and seabed mapping solutions.• Parker Maritime: 1: Subsea metrology using photogrammetry.• Scanmudring: 1 & 3: Executes seabed preparation (excavation and rockdumping), pipeline & cable

burial and deburial, including required planning and preparations.• Subsea 7: 1, 2 & 3: Installation and IMR contractor.• Technip Norge: 1, 2 & 3: Installation and IMR contractor.• Techno Dive: 1: Surface Supplied Air Diving.

12

4Subsea aSContact person: Henning Christensen Title: Managing DirectorE-mail address henning.christensen@4subsea.comCompany website www.4subsea.com

COMPANY DESCRIPTION:4Subsea AS is a leading independent engineering com-pany within subsea technology and renewable energy. Within subsea technology, the business objective is to develop and supply high-end services and solutions to the oil and gas industry with focus on flexible and rigid risers, and wellhead systems.

ThE OVERALL ROLE OF 4SUBSEA: • Provider of independent specialist services and solutions

on flexible pipes, rigid risers and wellhead systems• Caretaker of riser and subsea systems including supply

of life cycle management systems and software solutions • Provider of advisory systems for drilling and work-over

riser operations

PRODUCTS:• Flexible riser and dynamic umbilical external sheath

repair system• Flexible riser annulus conditions monitoring system• Flexible riser annulus repair clamp• Flexible riser motion monitoring system• Wellhead motion monitoring system• Drilling and work-over riser operational advisory system• Tailor made riser monitoring systems• Tailor made flexible riser repair systems• Database solutions for collection, systemization and use

of design and operational data• Software solutions for online operational support

SERVICES:Field development• Concept and FEED engineering on flexible riser systems• Flexible riser system design and operational guidelines• Upheaval buckling and protection analysis of flexible

pipes and tails• Marine and work-over riser system engineering • 3. party verification of drilling and work-over riser system

design• 3. party verification of flexible flowline and riser system

Advanced engineering• X-section analysis of flexible pipes and umbilicals• Fatigue analysis of drilling and work-over riser compo-

nents and wellhead systems

operational support• Flexible riser annulus testing • Flexible pipe service life analysis including service life

extension• Flexible pipe dissection and failure investigation• Wellhead fatigue monitoring and analysis• Work-over riser operational envelopes • Operational data management and processing

Software development• Web based database solutions built on SharePoint, MS

SQL server, Azure etc• Customized tools related to structural analysis, measure-

ment data and processing• Integrity management• Integrity management solutions and services related to

flexible riser and flowline systems

REFERENCES:Statoil, BP Norge, Norske Shell, ExxonMobil, Teekay PetroJarl, Framo Engineering, BW Offshore, FMC Technologies, Maersk Production

13

aBB aSContact person: Borghild LundeE-mail address: borghild.lunde@no.abb.com Company website: www.abb.com\oilandgas

COMPANY DESCRIPTION:ABB is a global leader in power and automation technolo-gies that enable utility and industry customers to improve their performance while lowering environmental impact. Sustainability is integral to all aspects of our business. We strive to balance economic, environmental and social

objectives and integrate them into our daily business decisions. Technology plays a key role for ABB. We have activities all over the world working to develop unique tech-nologies that make our customers more competitive, while minimizing environmental impact. ABB operates in more than 100 countries and has offices in 87 of those countries to give its global and local customers the support they need to develop and conduct their business successfully.

SERVICES:Modification, service agreements

SELECTED REFERENCES:Project operator/owner Delivery System deliveredÅsgard MF Project Statoil Hydro AC/DC Cabel, Transformers Electrification; Subsea, System calculations/

services Ormen Lange Subsea Statoil Hydro/Shell Transformers Electrification; subseaTyrihans Subsea StatoilHydro MV Drives, Transformers Electrification: Subsea, System calculations/ser-

vices, Electrical Control System Topacio Exxon-Mobil Transformers Electrification; subseaCeiba C3/C4 Amerada-Hess Transformers Electrification; subseaCeiba Full Field Amerada-Hess Transformers Electrification; subseaSEPDIS N/A-test unit Transformers Electrification; subseaNa-Kika Shell-Nakika Transformers Electrification; subseaTyrihans Statoil Transformers Electrification; subseaOrmen Lange Statoil Transformers Electrification; subseaJack St. Malo Chevron Jack St. Malo Electrification; subseaBouri Agip Harmony Topside control of subseaGirassol FTOTAL Harmony Topside control of subseaTerra Nova PETRO CANADA Harmony Topside control of subseaJudy Joanne ConocoPhillips UK Advant Master Topside control of subseaBlane / Ula BP Norge 800xA, PLC Connect Topside control of subseaRev Project /Armada Plattform BG Advant Master Topside control of subseaVincent Woodside 800xA, AC800M Topside control of subseaKitan Subsea ENI 800xA, AC800M Topside control of subsea

14

agR Facilities Solutions aSContact person: Inge HolmTitle: Vice PresidentE-mail address: inge.holm@agr-ps.comCompany website: www.agr.com

COMPANY DESCRIPTION:AGR Facilities Solutions AS provides a complete range of solutions for the oil and gas industry. Believing in the impor-tance of choice and flexibility, they recognize that clients need to easily select exactly what they need, wherever they may be. AGR Facilities Solutions AS is an independent ser-vice provider focusing on adding value through integrated teams, efficient technical solutions and new business models. The aim is to:• Achieve optimum field development solutions for our

clients• Assist Clients in the efficient and safe commercialization

of hydrocarbon resources, using leading edge technolo-gies and world-class processes

• Focus at an early stage on interaction between reservoir modeling, drilling and production strategy

• Promote highly skilled and experienced teams which integrate our subsurface, well construction, drilling operations, production system, risk and economics competences

• Provide an economic and commercial view of the invest-ment opportunity

• Deliver safe management and execution of subsea tie-back projects and general field development projects

• Take advantage of the market players and competitive bidding when selecting technical solutions, obtaining the best solution for the clients.

AGR Facilities Solutions AS integrates the experience of the Reservoir and Well Management teams. The division’s unrivalled subsea and project management expertise opti-mizes field development solutions.

PRODUCTS:AGR Facilities Solutions AS can provide, either as a com-plete team or parts of a team:AGR provides engineering and construction services, technologies, product solutions, and field-life solutions to the oil and gas industry worldwide. The company’s drilling technologies include drilling equipment and drilling lifecycle services; engineering solutions comprise studies and front end services, FEED and EPC contracts, offshore oil and gas production facilities, floater designs, jackets, onshore oil & gas receiving and processing facilities, riser systems; maintenance, modifications, and operations (MMO) consist of front end studies, technology services, and decommis-sioning (offshore facilities), as well as MMO modifications

contracts, portfolio contracts, frame agreements; and mooring and loading systems and lifecycle services. AGR Facilities Solutions provides complete design solutions within subsea production systems and technologies; sub-surface and well, including reservoir evaluation services, well intervention services, and deepwater well Intervention, as well as surface trees and wellheads, and wellstream processing solutions comprising process systems technolo-gies, process systems lifecycle and support, and subsea processing systems.

SERVICES:• Feasibility Studies – early phase screening to determine

that there is at least one commercial development option• Concept Selection – choosing the preferred development

option• FEED Studies (Front End Engineering Design) – prepar-

ing for execution• Preparation of ITT packages and assistance in tender

evaluation• Execution – implementation and management of total

subsea tie-back field development projects and general field development projects

• Planning and execution of abandonment projects on behalf of Clients

• Production – managing the reservoir, wells and facilities throughout the producing lifetime in close cooperation with AGR Field Operations.

• Continuous testing of concepts and plans against eco-nomic criteria and early identification and planning for key risks and opportunities

• Assist in a structured decision making process – in close co-operation with our Clients. Management teams will work either integrated with Client teams or as a stand-alone team with defined responsibility

• Focus on implementation and follow-up of HSE and quality requirements is maintained through all stages of a development.

SELECTED REFERENCES:Our core team consists of experienced personnel with extensive expertise in:• Conceptual design and front end studies for both subsea

and topside projects• Planning processes from high level to detailed level• Formal evaluation processes – both technical and

commercial• •Management of project execution for both subsea and

topside projects• Management of marine operations – installation and

recovery work• Management of operation phase for vessels.

15

aker Solutions Contact person: Severin RoaldTitle: VP communicationsE-mail address: severin.roald@akersolutions.comCompany website: www.akersolutions.com

COMPANY DESCRIPTION:Aker Solutions is a leading global oil service company providing solutions across the complete value chain of the subsea industry and beyond.

The company’s subsea and sub-surface offerings cover all phases of the life of oil and gas fields. From reservoir stud-ies, concept screening and design through manufacturing, fabrication, installation and commissioning to operational support, maintenance and final decommissioning.

Aker Solutions’ ability as a provider of complete subsea production and process systems is backed by an extensive service portfolio and a product range with a great record of technological innovation.

PRODUCTS:Product solutions • Subsea production systems including wellheads, subsea

trees, controls, manifolds, structures and tie-in systems• Subsea processing and compression systems including

subsea separators and pumps• Subsea power distribution systems• Static and dynamic umbilicals and subsea power cable

systems • Subsea intervention and workover systems• Mooring and loading systems• Deep water drilling technologies and equipment

SERVICES:Field life solutions• Geological services• Drilling services• Installation services

• Rental tool services• Maintenance, modifications & operations services includ-

ing field life extension and cost reducing activities• Well intervention services including cost effective deep-

water services by vessels• Condition monitoring and remote assistance services

Engineering solutions• Concept feasibility and field planning services• Front-end engineering and design (FEED) services• Flow assurance services• Product independent consultant services operating

worldwide• Third party verification services

SELECTED REFERENCES:Project owner/operator Systems deliveredÅsgard subsea compression system

Statoil Complete “all electric” subsea com-pression system including separa-tion, cooling, compression, pumping, power distribution, control system, templates manifolds and tooling. Aker Solutions is also responsible for the topsides modifications.

Goliat production system

ENI Complete subsea production system in the North Sea including wellheads, subsea trees, controls, umbilicals, manifolds, structures and tie-in systems

Reliance production system

Reliance Complete subsea production system in Indian Ocean including wellheads, subsea trees, controls, umbilicals, manifolds, structures and tie-in systems

Vigdis workover system

Statoil Large bore open water workover systems enabling well intervention operations on any subsea tree from any vendor, without any IP infringe-ment to other party equipment.

Computer rendering of Vigdis Workover System Computer rendering of Åsgard Subsea Compression Station

16

apply Nemo aSContact person: Anne Kristin MellemTitle: Chief Account/Market Support

CoordinatorE-mail address: Anne.Kristin.Mellem@Applynemo.comCompany website: www.applynemo.com

COMPANY DESCRIPTION:Apply Nemo is a highly qualified and experienced supplier in the development and manufacture of products for subsea pipeline systems. With our early entry into the subsea indus-try we have built one of the longest and most diverse track records in the subsea market. As an experienced engineer-ing and construction company, we deliver reliable products or subsea solutions tailored made for our clients.

The Apply Nemo companies are:• Apply Nemo AS, located at Lysaker close to Oslo,

Norway. The company was founded in 1989 and is head-quarter for the Apply Nemo group of companies.

• Apply Nemo AB, located in Stockholm, Sweden. The company delivers pipeline engineering services.

• Apply Nemo Pty Ltd located in Perth, Australia is serving the Australian and Asian market. The company offers a full suite of innovative engineering services, with a key focus on delivering innovative and cost-effective solutions.

• Apply NemoTech AS, located at Hokksund, Norway. Apply NemoTech is our manufacturing company with 25 years of experience in fabrication of products for the subsea market.

SERVICES:

• Tie-in systems Early phase studies

• Pipeline weak links Detail engineering of pipeline systems

• Subsea structures Subsea repair services

• Pipeline supports Subsea modification services

• GRP protection covers

• Active cooler• HIPPS system• Nemo actuators• Automated pig launcher• Handling and intervention equipment• Repair tooling• Retrofit hot-tap solutions• Pipeline- and hang-off clamps

SELECTED REFERENCES:Client: Statoil Provision of Åsgard retrofit hot-tap gooseneck, 2010–2012, Troll C N1 Manifold repair system, 2010Tordis & Vigdis tools for diverless replacement of control units, 2009–2012Snorre B repair clamps, several deliveries since 2004 Ormen Lange hot-tap valve module and isolation plug system, 2007–2010, Ormen Lange phase I & II protection cover system, 2007–2010, Gjøa development project, 2007–2008, Tyrihans development project, riser bases, inline tees and protection covers, 2006–2008

Client: FMC TechnologiesVisund tooling for riser plug inspection, 2011, Kirinskoye provision of tees and PLETs, 2011, Ormen lange adjusta-blel pipe supports, 2005–2006

Client: Technip NorwayBurullus hot-tap clamp, valve, gooseneck and GRP protection covers, 2009–2011, Gullfaks repair project, 2006–2009, Tampen Link subsea structures & remote tie-in connectioin system, 2005–2008, Åsgard anode pad repair clamps, 2005–2006

Client: BPSkarv actuator removal tool, 2009–2010

Client: Technip CanadaPipeline weak links, 2008–2009 and 2011

Client: Saipem UKOrmen Lange hot-tap tees, 2005–2006

17

aS ConnectorContact person: Pål Magne HisdalTitle: General ManagerE-mail address: pmh@as-connector.comCompany website: www.as-connector.com

Kokstadflaten 17, PB 22 Kokstad, 5863 Bergen

CoMPaNY DESCRIPtIoNAS Connector develops and delivers ROV operated pipe-line repair equipment and services

PRODUCTS:Our products include a complete Deepwater Pipeline Repair System consisting of:

• Pipeline Repair Connectors with Ball Joints• Pipeline Coating and Welding Seam Removal Tools• Pipeline Structural Clamps• Pipeline Lifting Tools• Pipeline Freespan Correction equipment • Pipeline Flange Bolt Exchange Tool• Pipeline Flange Safety Clamps• Cutting Tools

SERVICES:Solving Deepwater ChallengesEngineering Services

SELECTED REFERENCES:Petrobras

18

Bredero Shaw Norway aSContact person: Eirik SimonsenTitle: General Manager/

VP Global Flow AssuranceE-mail address: esimonsen@brederoshaw.comCompany website: www.brederoshaw.com

COMPANY DESCRIPTION:Bredero Shaw is the global leader in the development and manufacture of pipe coating solutions for the oil, gas, and water industries. Bredero Shaw has more than 75 years of experience, over 27 pipe coating facilities on 6 continents and the largest team of technical and service specialists in the business. Bredero Shaw offers techno-logically advanced solutions for anti-corrosion coatings, protective and weight coatings, thermal flow assurance coatings, internal coatings, custom coatings and field joints for both onshore and offshore applications.

PRODUCTS:Our product range for Offshore Pipelines, Field Joint and Subsea structures are: anti Corrosion Coatings, Concrete Weight Coating, thermal Insulation and Internal coatings.

SERVICES:• Bredero Shaw understands the offshore environment and

is capable of providing complete coating solutions on a global basis. As the leader in offshore pipe coating solu-tions, the company offers many advantages including:

• Complete solutions for all applications including anti-corrosion protection, thermal flow assurance, protective and weight coating, internal flow efficiency and custom coating

• A wide array of coating solutions ranging from small diameter flowlines and risers to large diameter trans-mission lines. The company has coated pipelines for the most diverse depth, environment and installation conditions.

SELECTED REFERENCES:Bredero Shaw has supplied services to all major offshore markets in the world and some key projects are:

Company name: Bredero Shaw Norway AS Contact person: Eirik Simonsen Title General Manager/VP Global Flow Assurance E-mail address: esimonsen@brederoshaw.com Company website: www.brederoshaw.com COMPANY DESCRIPTION: Bredero Shaw is the global leader in the development and manufacture of pipe coating solutions for the oil, gas, and water industries. Bredero Shaw has more than 75 years of experience, over 27 pipe coating facilities on 6 continents and the largest team of technical and service specialists in the business. Bredero Shaw offers technologically advanced solutions for anti-corrosion coatings, protective and weight coatings, thermal flow assurance coatings, internal coatings, custom coatings and field joints for both onshore and offshore applications.

PRODUCTS: Our product range for Offshore Pipelines, Field Joint and Subsea structures are : Anti Corrosion Coatings, Concrete Weight Coating, Thermal Insulation and Internal coatings. SERVICES: • Bredero Shaw understands the offshore environment and is capable of providing complete coating solutions on a global basis.

As the leader in offshore pipe coating solutions, the company offers many advantages including: • Complete solutions for all applications including anti-corrosion protection, thermal flow assurance, protective and weight

coating, internal flow efficiency and custom coating • A wide array of coating solutions ranging from small diameter flowlines and risers to large diameter transmission lines. The

company has coated pipelines for the most diverse depth, environment and installation conditions.

REFERENCES: Bredero Shaw has supplied services to all major offshore markets in the world and some key projects are:

Linepipe  and  Field  Joint  Insulation  for  Reeling   Linepipe  and  Field  Joint  Insulation  for  S-­‐lay   Linepipe  Insulation  

Portable  plant  technology   Custom  Coating  for  Anode  joints   Concrete  Weight  Coating  

Insulation  of  Valve  body  in  Polypropylene   Insulation  of  Tie-­‐Inn  connector   Insulation  of  Bends  

19

Clampon aSContact person: Tonje Dahl / Tine DaleTitle: Market CoordinatorE-mail address: tonje.dahl@clampon.com /

tine.dale@clampon.comCompany website: www.clampon.com

COMPANY DESCRIPTION:ClampOn is a leading worldwide manufacturer of topside and subsea non-invasive ultrasonic intelligent sensors for particle, PIG, leak, vibration and corrosion-erosion monitoring. We work with our customers in the oil & gas industry to optimize their productivity and to safeguard their investments. Since the beginning in 1994 it has been the stated aim of ClampOn to develop and produce the best equipment of the highest possible quality. To do this we developed a technological platform with intelligent process-ing, in which the software determined the area of applica-tion of the instrument. Focusing on our core technology has enabled us to sell user-friendly, cost-effective products to customers all over the world.

ClampOn´s head office is in Bergen, Norway. The company is represented in all major oil and gas regions in the world.

PRODUCTS:Sand/Particle Monitor, PIG Detector, Corrosion-Erosion Monitor, Leak Monitor, Vibration Monitor, Well Collision Detector. Topside- and subsea applications.

SERVICES:• Sand Management & Support• Real-time monitoring:

• changes in wall thickness• pigs in pipelines• leaks on valves• vibration on constructions/manifolds.• sand in production lines• directional drilling

SELECTED REFERENCES:Worldwide operators and engineering companies (Shell, Total, BP, Statoil, ExxonMobil, Nexen, ENI, Dong, Woodside, Saudi Aramco, FMC, Aker Solutions, Cameron, GE i.e.)For additional information please contact us.

20

CRE8 Systems aSContact person: Morten BøgildTitle: CEOE-mail address: morten.bogild@cre8.noCompany website: www.cre8-systems.com

COMPANY DESCRIPTION:CRE8 is an innovative and quality-oriented engineering company designing, manufacturing and assembling Electro/Hydraulic Control systems for the oil and gas industry.

PRODUCTS:CRE8 is a key partner with an unrivalled level of service and support to our customers within engineering and pro-duction of Electro/Hydraulic systems and services for both Topside and Subsea applications.

Typical Products:• Intervention & Workover Control Systems,• Hydraulic Power Units,• Subsea Control Modules Test Stand,• Wellhead Control Panels,• Local Control Panels,• Test & Flushing HPU,• Hydraulic & Electric Distribution Panels,

• Hydraulic Termination Panels,• X-mas Tree Instrumentation,• Umbilicals incl. Stab Connection Plates,• Hydraulic Accumulation Units,

SERVICES:CRE8 deliver innovative new technology to the market and is directly contributing to the success of our customers objectives by using standardised and modular technology. Our team has worked together for many years and is capable of executing the most complex systems within our line of business and our expertise includes:

• HSE-QA• Engineering and Studies• Design, Lay-out, Structural Calculations• Project Management• Supply Chain Management• Production Facilities• Testing Facilities• Courses, Training• Commissioning

SELECTED REFERENCES:The CRE8 team is within it`s area the most experienced in Norway and have references to most of the large interna-tional Engineering and Oil & Gas Companies.

21

Deep Sea anchors aSContact person: Ivar ErdalTitle: Chief Executive Officer E-mail address: ivar.erdal@deepseaanchors.comCompany website: www.deepseaanchors.com

COMPANY DESCRIPTION:Deep Sea Anchors AS is a technology developer and pro-vider of unique and patented anchor solutions for offshore floating structures, especially in soft seabed sediments. We deliver smart, responsive, end-to-end engineering, procurement, and construction (EPC) solutions for both permanent and non-permanent anchoring using Deep Penetrating Anchor (DPATM). We have expertise in marine soil mechanics to provide engineering design and geotech-nical consultancy, especially for anchoring larger floating structures, to the offshore energy industries as well as for offshore civil applications.

PRODUCTS:The Deep Penetrating Anchor (DPA™) is a dynamically installed anchor which is released freely from a prede-termined height over the seabed, using gravity as the installation force. The DPA™ has many advantages over conventional solutions. These anchors penetrate well below mud line into stiff clay sediments thus allowing for taut leg mooring. These factors translate into a cost effective alter-native, which is insensitive to water depth.

In comparison to alternative solutions, DPA™ offers the following advantages:• No external energy required for installation• Greater weather window than comparable suction

anchors solutions

• No orientation requirements, i.e. can be loaded in any direction

• Precise horizontal positioning• Quick installation• Applicable for taut leg mooring• Low sensitivity to increasing water depth• No restriction regarding water depth, i.e. no electrical

cables, pump skids, etc.• No proof loading required• Only one failure mode to analysis• More cost-effective with respect to fabrication and marine

operations than comparable alternative solutions

SERVICES:We provide a comprehensive range of anchoring solutions and services for offshore floating structures especially in soft seabed sediments.

Services offered range from various subjects such as, but not limited to:• geotechnical advice, design, and engineering• anchor sizing reports• fabrication and transportation of the Deep Penetrating

Anchors (DPATM)• installation procedures and supports

SELECTED REFERENCES:• Deep Sea Anchor has been ISO 9001:2008 certified and

is registered on Achilles JQS database of pre-qualified suppliers.

• Two full size 75 ton DPA™ were successfully installed at the Gjøa field in mid August 2009 and the DPA™ was qualified by class society in the last quarter 2009

22

DEEPoCEaN aSContact person: Bjorn Inge StaalesenTitle: Sales and Marketing ManagerE-mail address: bis@deepocean.noCompany website: www.deepocean.no

COMPANY DESCRIPTION:DeepOcean is a recognized market leader in the provi-sion of high quality ROV based subsea services within Inspection, Repair, and Maintenance, Survey and Construction Support and Decommissioning in the oil& gas, and energy industry.

The company was established in 1999 and is founded on the provision of high quality equipment and services combined with teams of highly experienced personnel with strong knowledge of subsea operations.

Having its origins in the North Sea , the company now operates on a global basis and has secured work in the North Sea, Mediterranean, West Africa, Brazil, Southeast Asia and Gulf of Mexico.

It is headquartered in Haugesund (Norway) and supports its overseas contracts through regional facilities in Den Helder (The Netherlands), Ciudad del Carmen (Mexico) and Macae (Brazil).

DeepOcean operate more than ten subsea vessels and own more than 15 ROV spreads. DeepOcean employ 600 highly skilled personnel and have annual revenues of more than 300 Million USD.

PRODUCTS:DeepOcean provide ROV based subsea services from specialized subsea support vessels.

Projects include provision of project management, opera-tional planning, engineering, fabrication, mobilization/demo-bilization, ROV vessel, offshore crew and have the overall responsibility during operations. Final reporting is typically. seabed maps, inspection reports, and final project reports.

SERVICES:We provide extensive engineering and design support for the planning and execution of offshore and subsea opera-tions in deep water down to 3000 meters. The Backbone of a successful subsea team is international experience combined with a good local knowledge and ability to adapt to new challenges.

Service range include; • Project Management and engineering• Pipeline and structural inspection• Seabed mapping• Lay support • Subsea maintenance and repair• Installation and construction support• Subsea decommissioning

SELECTED REFERENCES:DeepOcean have an extensive track record with major international oil&gas operators. Main Clients are Statoil, BP, Petrobras, Talisman, Marathon, ConocoPhillips,Total,Gaz de France Suez, Diavaz and Technip,

23

Det Norske VeritasContact person: Kåre KristoffersenTitle: Senior Vice PresidentE-mail address: kare.kristoffersen@dnv.comCompany website: www.dnv.com

COMPANY DESCRIPTION:DNV is a global provider of leading risk management competence. We help customers safely and responsibly improve their business performance, and turn risks into rewards. DNV is an independent organization with dedi-cated risk professionals in more than 100 countries.DNV is one of the world’s leading competence centers, and prime technical advisor for the offshore oil & gas industry.

PRODUCTS:DNV is a leading provider of advisory services related to quality and risk management in a lifetime perspective. DNV Software is a leading provider of software for managing risk.

DNV has developed rules and standards for ships for more than 140 years, and is a world leading classification society. We also develop rules and standards for the oil- and gas industry. DNV Offshores Standards such as DNV-OS-F101, DNV-OS-F201 & DNV Rules for Planning and Execution of Marine Operations as well as associated Recommended Practices.

SERVICES:Verification and Certification: We ensure your projects are properly managed through transparent risk based verifi-cation and certification.ShE Risk Management: We develop, implement, main-tain and continuously improve the best practices in SHE management.Technology Qualification: We provide you with the confi-dence that your technology will function reliably.Asset Risk Management: We safeguard integrity and maintain optimal production safely and cost-efficiently.Enterprise Risk Management: We provide a complete view of your organisations total risk exposure and manage these risks in an integrated way.

Subsea services: Qualification of new technology, perfor-mance assurance, verification, quality surveillance, certifi-cation of material and components, integrity management, lifetime extensions and requalification, fatigue failure and laboratory testing, risk assessment and risk management, flow assurance and sand management.

Drilling and well services: Qualification of new technol-ogy, verification, quality surveillance, integrity management, lifetime extensions and requalification, independent design analyses, fatigue failure and laboratory testing, risk assess-ment and risk management.

Pipeline & Risers services: design verification, inde-pendent design analyses, installation analyses, quality surveillance, integrity management, lifetime extensions and requalification, certification of material and components, qualification of new technology, fatigue failure and labora-tory testing, flow assurance and sand management.

Marine operations verification, review, independent analy-sis and warranty approval of marine operations.

SELECTED REFERENCES:The above services are provided to major oil companies such as Statoil, ConocoPhillips, Shell, Total, BP ,to major Offshore Contractors and Ship owners.

Typical project references are• Nordstream (Nordstream AG)• Åsgard subsea compression (Statoil)• Well integrity (JIP)• Valemon (Statoil)• Snorre 2040 (Statoil)• Ekofisk (ConocoPhillips)• Gjøa (Statoil)• Tyrihans (Statoil)• Statefjord latelife (Statoil)• Integrity Management Recommended Practice (JIP)• Lined and Cladded Pipelines Recommended Practice

(JIP)

24

DoF Subsea aSContact person: Olav Arne DrønenTitle: Commercial ManagerE-mail address: oad@dofsubsea.comCompany website: www.dofsubsea.com

COMPANY DESCRIPTION:DOF Subsea AS has its main office in Norway and is a world-class offshore construction support, ROV, survey, and IRM contractor. With more than 1200 qualified employees and 25 state-of-the-art offshore vessels DOF Subsea AS aims at providing our Customers with products, technologies and services worldwide at any depth and of highest quality.

Further info on: www.dofsubsea.com

PRODUCTS:Engineering studies, Feed studiesSubsea installation and operational services from own vessels.

Project management, engineering, and fabrication. ROV/ROTV operation, AUV & survey operation and pro-cessing of data during vessel operation.Final reporting, inspection and project close out reports

SERVICES:IRMMooring design and installation servicesSeabed surveySubsea metrologyPipeline and structure inspectionModule HandlingROV and intervention servicesDiving and intervention servicesConstruction supportSubsea engineeringEPCI Contractor services

SELECTED REFERENCES:DOF Subsea has a long track record with all major oil com-panies and offshore contractors worldwide

Main Clients are Shell, Total, Petrobras, ExxonMobil, Statoil, BP,ENI, ConocoPhillips, Subsea 7, Technip, Heerema Marine Contractors

25

EMaS aMCContact person: Eric Cecil FulfordTitle: SVP CommercialE-mail address: eric.cecil.fulford@emas.comCompany website: www.emas.com

COMPANY DESCRIPTION:EMAS AMC is a specialized subsea installation and marine services company with differentiated assets, delivering inte-grated solutions to the offshore energy industry worldwide.

PRODUCTS:• SURF (EPIC) • Cable installation• Floater and FPSO Installation • Pipelay and Heavlylift• Floatover Installation• Decommissioning and Removal

SERVICES:EMAS AMC has a proven track record of laying pipelines, cables and umbilicals, including coated carbon steel pipelines and bundled applications. In-house engineering resources provide complete design, analysis and installa-tion support, complemented by a modern and versatile fleet of rigid S-lay, flexible and reel lay construction assets.

Through strategic supply chain partners, EMAS AMC pro-vides engineering, procurement, installation and construc-tion support for subsea umbilicals, risers and flowlines. With a long history of success, we strive to deliver best-value solutions with a diverse offering of assets, services and engineering designed to fully meet our client’s need. As part of the EMAS Group, a leading global offshore con-tractor providing construction, marine, production and well intervention services, we are well positioned to take on the most advanced and complex projects.

SELECTED REFERENCES:SURFShell Popeye BP Thunderhorse/Atlantis BP Blind Faith

Floater & FPSo InstallationBP SkarvStatoil Gjøa Exxon Mobil Adriatic LNG Floatover Installation: Woodside Energy Angel

Removal: Phillips Petroleum Maureen Total Frigg

26

Fedem technology aSContact person: Gunnar PaulsenTitle: Business Development ManagerE-mail address: gunnar.paulsen@fedem.comCompany website: www.fedem.com

COMPANY DESCRIPTION:Fedem technology aS is an independent company that performs engineering services and develops software for dynamic simulations and lifetime assessment of mechani-cal systems and offshore structures, both subsea and topside.

PRODUCTS:Fedem Technology develops and distributes the FEDEM software.

Our software solutions have been developed over 20 years, and have become the leading software for dynamic analyses of complex mechanical systems and structures in motion. The dynamic simulations are used for integrity analyses considering both strength and fatigue. The soft-ware is used within a wide range of areas, e.g.:

• Conductor, wellhead and riser systems; both rigid- and flexible risers

• Process facilities

• Winch- and crane systems• Offshore wind power

SERVICES:Our services include studies, detailed engineering or veri-fication of subsea equipment, well-/riser systems, offshore structures and vessels. Technical analyses are used to develop new products or more effective procedures for installation and operation.

Our goal is to reduce risk and cost for our customers by providing efficient and most accurate structural analysis and lifetime assessment.

To estimate the remaining lifetime, existing structures are analyzed based on dynamic simulations using historical data for loads and/or structural response. To ensure best possible lifetime assessment, the response can be moni-tored by instruments over a certain time, giving input to the simulations. Large and complex systems are modeled in the same global model with an ultimate level of details for most accurate determination of fatigue damage. Such analyses might often document extended structural capac-ity or lifetime compared to more simplified analysis, and thus representing a cost benefit for the project.

SELECTED REFERENCES:Our most recent subsea project references:

Client: Project: Task:Det norske oljeselskap Storebjørn, Stirby, Kalvklumpen, Jette Wellhead and drilling riser analysisStatoil Oseberg, Troll, Morvin and Vega Wellhead fatigue analysisOdfjell Well Management Grosbeak and Beta Statfjord South Conductor and wellhead analysisOdfjell Drilling Technology Heidrun BIT modifications Production and Workover riser analysis

Deep Sea Atlantic on Gullfaks BOP and drilling riser analysis

NEXANS Norway Thunder Horse (US) and Browse LNG (AUS) Subsea umbilical (riser) analysisLundin Petroleum NCS Well 16/1-14 Wellhead and riser analysisAker Solutions Alvheim, Visund, Trym and Goliat Wellhead analysisAGR Petroleum Services Zidane 2 Conductor, wellhead and riser analysis

27

FMC technologiesContact person: Arild SelvigTitle: Director Sales & MarketingE-mail address: arild.selvig@fmcti.comCompany website: www.fmctechnologies.com/subsea

COMPANY DESCRIPTION:FMC Technologies, Inc. is a leading global provider of tech-nology solutions for the energy industry & other industrial markets. FMC designs, manufactures and services subsea production & processing systems, surface wellhead sys-tems, high pressure fluid control equipment, measurement solutions, marine loading systems, blending and transfer systems, multiphase meters and direct drive systems for the oil and gas industry.

Subsea Systems: We are the world’s leading provider of subsea systems. Our goal is to help customers push the limits of offshore production with subsea processing systems that increase oil recovery from mature fields and enable the development of new ultra deepwater fields. We also engineer our traditional production systems to reduce installation and maintenance costs along with providing field service support that minimizes operational costs.

PRODUCTS:FMC Technologies is the leading manufacturer and supplier of subsea production systems, including subsea trees, controls and manifold and tie-in systems. In addition, FMC has a complement of engineering and customer support services, such as system engineering, flow assurance, flow measurement and project management.

SERVICES:FMC Technologies provides a complete range of services for any subsea production system. Our overall mission is to reduce the cost of a subsea system and its service needs.

REFERENCES:Please visit our web-pages http://www.fmctechnologies.com/en/SubseaSystems/GlobalProjects.aspx, to see an overview of our Global Subsea Projects.

The Subsea Global Projects pages provide detailed information for selected FMC Technologies subsea projects worldwide. It is divided in multiple geographical sections featuring key regional projects that have led to our global success.

28

FoRCE technology Norway aSContact person: Bjarne T. JensenTitle: Sales Manager E-mail address:bzj@force.noCompany website: www.forcetechnology.com

COMPANY DESCRIPTION:FORCE Technology’s operations within Oil & Gas contain several specialized technologies that focus primarily on servicing the offshore industry.Our competence in Norway is built on strong competences with 30 years of experience within innovative development and use of knowledge and technology.

PRODUCTS:• Flexible and Rigid- Riser and Structural Monitoring

Systems.• Analyzing/Modeling Software Programs.• Subsea NDT Inspection and Instrumentation• Corrosion Protection Equipment

SERVICES:• Structural integrity services• Material and corrosion management• Cathodic protection design, verification, management &

services• Inspection, onshore, offshore and world class subsea

inspection and verification. • Monitoring systems of risers, structures etc. including

FORCE Technology`s sophisticated sensors and online, historical and predictive modeling of fatigue processes/analyzing-intelligence systems.

• Maintenance management• Pipeline integrity management• Consulting services within asset integrity.

SELECTED REFERENCES:Statoil, BP, Petrobras,Shell, Total, Talisman, ExxonMobile, JK-Kenny, Technip, Subsea7/Acergy,GE/Vetco, Cameron, Aker, FMC….

29

Framo EngineeringContact person: Jan EldeTitle: Sales Manager, Pumps & Subsea SystemsE-mail address: je@framoeng.noCompany website: www.framoeng.no

COMPANY DESCRIPTION: Framo Engineering is one of the world’s leading companies within Subsea Multiphase and Single-phase Boosting systems, Metering systems and Swivel and Marine Systems. The company is engaged in major development and delivery projects with a significant market share for new – as well as mature, marginal and deepwater field developments. The company develops and delivers Subsea Boosting and Swivel systems under EPC contracts or as integrated supplier for subsea productions systems. Deliveries are supported by system integration testing performed in advanced Assembly and Test Dock facilities.

Framo Engineering has established a well organized Customer Support department for the after sales market, installation, commissioning and start-up, Service Agreements, 24/7 on-call support for Clients.

Framo Engineering has established branch offices in Houston, Aberdeen, Rio de Janeiro and Kuala Lumpur.

PRODUCTS:• Multiphase and Single-phase Booster Pump systems for

Subsea, Topside and Land applications • Multiphase Compressors systems for topside and subsea

installations• Multiphase /Wet Gas Flow Meters for topside and subsea

installation• Swivel stack / Turret systems for FPSO• Submerged offloading systems• Offshore Cryogenic Transfer systems

SERVICES:Framo Engineering has an integrated working methodol-ogy for its operation and maintenance support for subsea and topside booster pump systems, multiphase metering and fluid transfer/ swivel systems. Condition based- and planned preventive maintenance and operational support is practiced using the Client Web-portal FRIEND (FRamo Interactive ENabling Diagnostics).

The Customer Support Department manages all opera-tional and maintenance activity and follow-up of products and systems as well as the 24/7 on-call service. On-call personnel are alerted by FRIEND when equipment opera-tion deviates from recommended Best Practice.

CS Department offers a fully integrated working methodol-ogy and Integrated Operations with customers throughout the equipment life time, facilitated through Service Agreements.

SELECTED REFERENCES:Latest Multiphase Boosting and Compression projects:• Jack & St Malo Field in GoM for Chevron, EPC for 3

complete subsea booster pump systems, 15 kpsi and 2 400 m WD

• CLOV project for total, EPC contract for delivery of 1 off dual pump system, 1 300 m WD

• Wet Gas Compression qualification project

Latest Swivel and Marines systems projects:• OGX/Modec, OSX3 FPSO, complete swivel stack system• Teekay Petrojarl Production AS, BG Knarr FPSO, com-

plete turret and swivel system

Latest Multiphase Metering projects:• CLOV – FMC/Total – Angola – 20 Subsea PhaseWatcher

Vx multiphase meters• Liwan – Cameron/Husky Oil – Asia – 10 Subsea

PhaseWatcher Vx wetgas meters• BC-10 Phase II – Shell – Brazil – 8 Subsea

PhaseWatcher Vx multiphase meters

30

gE oil & gasContact person: Eva KristensenTitle: Managing DirectorE-mail address: eva.kristensen@ge.comCompany website: www.ge-energy.com

COMPANY DESCRIPTION:GE Oil & Gas is a world leader in advanced technology equipment and services for all segments of the oil and gas industry, from drilling and production, LNG, pipelines and storage to industrial power generation, refining and petro-chemicals. GE Oil & Gas also provides pipeline integrity solutions, including inspection and data management, and design and manufacture wire-line and drilling measurement solutions for the oilfields services segment. Our Oil & Gas team leverages technological innovation from other GE businesses, such as Aviation and Healthcare, to continu-ously improve oil and gas performance and productivity.

OUR NUMBERS:Employees: ~33,000Manufacturing: >25 sites worldwideOperating in 115 countries

INSTALLED BASE:Subsea drilling systems: used on 50% of all subsea wellsSubsea production: >1,000 systems installedDownhole measurement systems: >10,000 worldwideFlexible pipe manufactured since 1989: >2,500 nKm

PRODUCTS:Subsea Systems: Subsea trees & wellheads, Subsea power & processing, Controls, Manifolds, Flexible risers, Flow lines, Speciality connectors & pipes, Floating produc-tion systems

SERVICES:Remote monitoring & diagnostics, Pipeline inspection & integrity services, Conceptual and FEED engineering, Risk and Mitigation analysis, Flow assurance.

REFERENCES/GLOBAL CONTACTS:GE Oil & Gas Global:Head of Regional Operations & Global Sales – Manuel Terranova, Sr.Vice President

GE Oil & Gas Regional:• North America:

Wayne Wallace, Regional General Manager (Houston) tel. +17136832455

• Latin America: Fernando Martins, Regional General Manager (Rio de Jameiro) tel. +2138240613

• Scandinavia/Russia/Caspian: Eva Kristiansen, Regional General Manager (Sandvika) tel. +4766985500

• Asia Pacific: Alessandro Bresciani, Regional General Manager (Singapore) tel. +6568643438

• Europe/EUK: Matt Corbin, Regional General Manager (Aberdeen) tel. +441224852357

• Gulf/Algeria: Gordon Cameron, Regional General Manager (Doha) tel. +97444349417

• Angola/Sub-Sahara: Simon Bolton, Regional General Manager (Luanda) tel. +441224357950

• Nigeria: Francesco Mastronardi, Regional General Manager (Lagos) tel. +23414629421

• Australia: Mike Hosford, Regional General Manager (Perth) tel. 061862107340

31

gRENLaND gRoUP aSContact person: Tor AardalTitle: VP Sales and Marketing, FabricationE-mail address: toa@grenlandgroup.comCompany website: www.grenlandgroup.com

COMPANY DESCRIPTION:Grenland Group is an experienced, powerful and com-petitive Engineering, Procurement, Construction and Installation Company.

The company is situated at 9 different locations in Norway, in addition to Shanghai in China Grenland Group is an attractive employer for highly quali-fied personnel employing more than 1100 people in Norway and Asia

The company has three main business areas – Solutions, Maintenance and Modifications and Fabrication

SERVICES:• A world-leading fabrication of sub sea products and

systems• Grenland Group has fabricated over 200 manifold mod-

ules, separation systems, integrated template systems, and other sub sea equipment. We also build topside modules.

SELECTED REFERENCES:Fabrication:• Client: FMC Technologies.• Laggan and Tormore Project – Template Manifold

Systems• Ormen Lange Phase III – Template Manifold System• Kirinskoie Project – Manifold and Foundations• Pazflor – 3 off Sub Sea Separation Systems• Statoil Fast Track Projects, Visund Sør, Stjerne, Hyme,

Vigdis NØ,Visund Nord – Template and Manifold Systems• Ekofisk Phase I and II

32

Institute for Energy technologyContact person: Rolf NyborgTitle: Department Head E-mail address: Rolf.Nyborg@ife.noCompany website: www.ife.no

COMPANY DESCRIPTION:Institute for Energy Technology (IFE) is an independent research institute for energy and nuclear technology. The institute has a permanent staff of 550 and an annual turnover of about 125 MUS$. Within petroleum technology IFE has expertise in reservoir tracer studies, multiphase transport, corrosion control, and control room engineering. More than 80% of the turnover is financed by industry and more than 50% is financed by international clients.

SERVICES:IFE is mainly a research institution and as such delivers new knowledge, methods and technology for our clients. In addition to research projects some research-based com-mercial services are delivered.

Within the SURF-area IFE’s Corrosion and Materials Technology Department serves the industry with corrosion mitigation testing for safe use of carbon steel in multiphase flow-lines with presence of H2S and CO2. IFE delivers ser-vices for measurement of liquid content of gas-condensate pipelines using tracer technology.

IFE provides testing and consultancy services for:• corrosion control in gas condensate pipelines using pH-

stabilized glycol,• corrosion inhibitor qualification for high temperature or

high H2S content service,• scale control in MEG regeneration systems serving gas-

condensate tie-backs,• measurement of liquid content of gas-condensate pipe-

lines .

SELECTED REFERENCES:• Studies of pH stabilization for corrosion control, top of

line corrosion studies and operation of MEG regeneration system for an offshore gas field with high CO2 content. Project for a major IOC, 2003 – 2009.

• Evaluation and field support for scale and salt precipita-tion in glycol regeneration system for an offshore gas field. Project for a major IOC, 2002 – 2008.

• Studies of pH stabilization for corrosion control for a deep water offshore gas field. Project for a major IOC, 2004 – 2006.

• Corrosion inhibitor qualification for an offshore oil field with high H2S content. Project for Agip KCO, 2002 – 2005.

• Liquid content measurement of gas-condensate pipelines on the Norwegian Continental Shelf from 2003 and onwards; Huldra–Heimdal, Troll–Kollsnes, Kvitebjørn – Kollsnes, Mikkel – Åsgard, Midgard – Åsgard.

33

IKM SubseaContact person: Ben Pollard Mahesh GovindanTitle: Managing Director Business Development ManagerE-mail address: ben.pollard@ikm.no mahesh.govindan@ikm-group.com Company website: www.ikm.no/ikmsubsea

COMPANY DESCRIPTION:IKM Subsea is a Norwegian company specializing in ROV, trencher and related subsea equipment. As part of IKM, a large multidiscipline sub supplier to the oil & gas industry, we operate globally out of Bryne near Stavanger. We do have branch offices in Singapore and Malaysia

PRODUCTS:Electrical Workclass ROVElectrical Jet TrencherInspection Class ROV

SERVICES:ROV Operations, Trencher Operations

SELECTED REFERENCES:Solstad OffshoreOlympic ShippingK-Line ShippingStatnettOffshore Installation Group (OIG)

34

IKM testing aSContact person: Ørjan SkjerahaugTitle: International Sales ManagerE-mail address: Orjan.Skjerahaug@IKM.noCompany website: www.ikm.no

COMPANY DESCRIPTION:IKM Group is a multidiscipline service providers to the Oil & Gas industry. Through close collaboration with our clients and joint tenders the group is continuously growing and developing, and we endeavor to deliver cost effective, high quality solutions to our customers. Our ambition is that all of our clients will choose IKM as their preferred provider, and the priority area is growth. IKM will continue to establish new businesses, make strategic acquisitions and alliances in order to steadily develop IKM as a quality supplier.

IKM Testing is a company within the IKM Group. The company was established in 1992 and has grown to become a major supplier of Mechanical Completion and Commissioning services both to the onshore and the offshore industry in Norway and International locations. IKM Testing has its head office at Sola, Norway and depart-ments in Bergen, Kristiansund and Hammerfest. Subsidiary companies have been established in UK, Spain, Singapore, Indonesia, Thailand, Canada, Australia, Brazil, Kazakhstan and Poland.

IKM Testing’s operations can capitalize on the vast resources, personnel and equipment available from within own infrastructure as well as through locally established partnerships, which enable it to meet client requirements and demanding schedules. IKM Testing has participated in large scale projects and performed its services in all parts of the world.

IKM Testing has experienced and multi-skilled person-nel with high documented competence. To reinforce our

expertise we have established our own training and compe-tency centre, which is a very useful facility both for internal and external use.

SERVICES:• Pipeline, Flowline and Spools Pre-Commissioning• Pigging and Gauging• Flooding and Testing• Dewatering/Drying• Umbilical Testing• Decommissioning• Cuttings Transport System (CTS)• Nitrogen services • Video inspection • Pressure testing • Bolt working services• Hot oil flushing • Chemical cleaning • Hydrojetting • Drying/Air treatment• Preservation • Cold cutting services• On-site machining services• Pipe freezing • Certification of accumulators

SELECTED REFERENCES:• IKM Testing has extensive international experience, both

topside and subsea;• South Pars Phase 6/7/8 (Iran)• White Rose FPSO (Canada)• Adriatic LNG (Spain)• Kashagan (Kazakhstan)• Skarv FPSO (Korea)• Scarabeo 9 (China)• Hammerfest LNG/Snøvhit (Norway)• Ormen Lang Gas Plant (Norway)

35

iSURVEY groupContact person: Øivind RøeghTitle: CEOE-mail address: oiro@isurvey-group.comCompany website: www.isurvey-group.com

COMPANY DESCRIPTION:The iSURVEY group is a technology driven service company providing state of the art services to the offshore energy industry.

PRODUCTS:iSURVEY was founded in 2004, today consisting of 60 dedicated employees providing:• Experienced offshore surveyors and project management

staff• The iSURVEY system solutions (see image below)• Online 3D visualisation• Gyro and USBL calibrations

• LBL network planning, installation and operation• Bathymetric data acquisition and processing• Survey procedures• Survey and position data processing and reporting • Geodetic consultancy• GIS and CAD

All iSURVEY services are based on well proven HSE and ISO 9001:2008 certified procedures.

SERVICES:Based in Oslo and Singapore, iSURVEY offers specialist survey and positioning services supporting professional offshore operations internationally:• Rig and FPSO installations• Deep water marine construction work

SELECTED REFERENCES:The iSURVEY track record comprises projects world wide for the major oil companies and marine contracts.

36

KoNgSBERg oil & gas technologiesContact person: Terje GunnerødTitle: SVP Sales & MarketE-mail address: terje.gunnerod@kongsberg.comCompany website: www.kongsberg.com/en/KOGT

CoMPaNY DESCRIPtIoNWorld Class SURF Technology Expertise. Kongsberg Oil & Gas Technologies’ has over 20 yeras of development and project experience in SURF systems-, technology and man-agement. We offer proven technical excellence within subsea flowline and riser design, installation, operation and integrity. Our engineering capabilities and delivery capacity span from individual products and components to single source supplier of SURF technology, services and products to our worldwide customers. With over 500 completed projects Kongsberg provides essential engineering, consultancy and management services for SURF systems in the upstream oil & gas industry. Our customers are manufacturing companies, installation contractors and major oil companies.

PRODUCTS: (Please go online for additional information)We develop and deliver a range of field proven specialized products and technologies from concept and flow assurance studies to online monitoring systems for optimum vessel positioning during drilling and work-over operations to subsea pigging and installation systems for pipelines and flexible pipes.Subsea hardware: Pig Launchers/Receivers. PLETS, PLEMS, Structures (steel and GRP), Manifolds-, tie-in systems and riser base structures.Riser Monitoring Systems (RMS): Innovative monitoring system which increase operation envelopes, reduce riser stress and wellhead loads, reduce wear and provide critical information for the drill vessel in operation. Ancillary equipment/installation aids for pipelines: A wide range of ancillary equipment for efficient and safe work on offshore construction sites, all custom designed to suit each project’s exact requirements.LedaFlow®: Following a decade of development and indus-try collaboration, the next generation dynamic multiphase flow simulator is available. LedaFlow is addressing a market

demand for a better flow assurance modeling tool. Flow Assurance Services Experienced FA engineers can perform advanced multiphase flow simulations and flow assurance analysis by use of LedaFlow® and other avail-able tools. Kongsberg pioneered integrated flow assurance systems. + 80 solutions have been implemented world wide.

REFERENCES: (Please go online for additional information)The following examples are just a few of the hundreds of suc-cessful projects we have undertaken throughout the world:

Flexible pipe and umbilical analysis recent projects • Statoil Gjøa and Vega verification• Statoil Ormen Lange Southern field development 3rd

party analysis• Total Moho Bilindo fatigue• Statoil Troll B residual service life• Talisman Varg extended service life • Statoil Åsgard minimum flow • Marathon Volund water injection • SDAG Shtokman riser system

FlexStress project reference List • ExxonMobil multiple projects • Statoil Gjøa• Talisman Varg • Statoil Snorre 2040 life extention • Total Moho Bilondo • Statoil Visund

Recent hardware delivery reference list • Pig Launcher & Receivers: Technip (Gjøa, Ekofisk, Yme,)

Acergy (Ormen Lange), Subsea 7 (Vega)• PLET 5 off Subsea 7 (Vega) • RMS More than 20 systems delivered • Thermohydraulic analysis: – Flowline sizing – Thermal

insulation studies • Transient simulations: – Start-up – Shutdown – Ramp-up

– Turndown • Slugcatcher sizing • Inhibitor tracking

37

MaRINtEK (Norsk Marinteknisk Forskningsinstitutt aS)Contact person: Egil GiertsenTitle: Research DirectorE-mail address: info@marintek.sintef.noCompany website: www.marintek.com

COMPANY DESCRIPTION:The Norwegian Marine Technology Research Institute (MARINTEK) is a company in the SINTEF Group. MARINTEK performs research and development within ocean space technology in a global market, with main emphasis on the maritime sector, oil and gas, and ocean energy. MARINTEK has about 200 employees, and the main office and laboratories are at the Marine Technology Centre in Trondheim/Norway. We have subsidiaries in Rio de Janeiro/Brazil and Houston/Texas.

SERVICES:Research and development within:• Stress and fatigue analysis of risers, umbilicals and

power cables • Numerical analysis of vortex-induced vibrations (VIV) on

deepwater risers and flowlines • Static and dynamic analysis of pipelines; simulation of

pipelaying, free span assessment, upheaval buckling and snaking, on-bottom stability

• Full scale and component qualification testing of flexible risers, umbilicals and power cables

• Simulation of subsea operations

SELECTED REFERENCES:• STATOIL• Hydro• Nexans• NKT• Chevron

38

Multi Phase Meters aS (mpm)Contact person: Bjørn L. Pedersen Title: Sales DirectorE-mail address: blp@mpm-no.comCompany website: www.mpm-no.com

COMPANY DESCRIPTION:Multi Phase Meters (MPM) is an oil service company, specializing in supplying multiphase- and wetgas meters. MPM is a wholly owned subsidiary of FMC Technologies with headquarters in Stavanger, Norway.

MPM aims to serve customers in all regions of the world and has sales and service centers in Stavanger (Norway), Dubai (UAE), Houston (USA), Buenos Aires (Argentina), Milan (Italy) and Singapore.

PRODUCTS:MPM manufactures HighPerformanceFlowmeters for use in both multiphase & wetgas applications. The MPM Meter dif-fers from conventional meters by using a new and patented tomographic technology platform – 3D BroadbandTM.

The MPM HighPerformanceFlowmeter is designed for high-est operational stability and performance, and tests have

provided exceptional results in terms of stability, accuracy and repeatability. An extensive operator-driven test and qualification program was completed to qualify the MPM Meters for use in topside and subsea field applications.

The MPM meter is made to measure the oil companies’ most valuable asset.

MPM key words: • It works• It’s accurate• It’s easy to use• It’s self-calibrating

our Subsea meter withstands • a depth of 3500 meters,• a pressure of 1000 bar,• a temperature of 250°C

SERVICES:MPM recognizes the importance of dedication and long term commitment towards our customers. The organization is finely tuned towards performing high quality worldwide service and support. The high emphasis we put on this is reflected in our excellent customer satisfaction score.

39

Nexans Norway aSContact person: Bjørn BjørnstadTitle: Sales ManagerE-mail address: Bjorn.Bjornstad@Nexans.comCompany website: www.nexans.no

COMPANY DESCRIPTION:Nexans Norway AS is one of the world’s leading suppliers of subsea umbilicals and high-voltage submarine cables, and is the leading supplier of power and telecommunica-tions cables in Norway. Nexans Norway AS develops, manufactures and markets submarine, land and offshore umbilicals, and cables for power and telecommunication transmission. The company also markets cables manufac-tured by NVC in Japan, a production company which is a joint venture between Viscas and the Nexans group.

Nexans Skagerrak AS is a wholly owned subsidiary of Nexans Norway AS. Nexans Skagerrak AS is engaged in transport, laying and installation of submarine power cables and owns the cable laying vessel C/S Nexans Skagerrak.

Nexans Norway’s plants are located in Namsos, Rognan, Karmøy, Halden and Langhus and the company’s head office is in Oslo. Nexans Norway has approx. 1,300 employees.

Nexans Norway AS is part of the French Nexans group – one of the world’s largest cable manufacturers - and the company is a wholly owned subsidiary of Nexans participa-tions SA in Paris.

PRODUCTS:Nexans has worked with cables for almost 100 years, and has more than 25 years experience as a manufacturer of umbilicals for the offshore industry adapted to harsh North Sea conditions.

Nexans has qualified control umbilical and power umbilical for 3000 meters water depth, and aims beyond this.

Nexans provides complete EPC (engineering, procurement and construction) umbilical solutions from engineering to manufacturing and the qualification and testing.

SERVICES:Nexans provide installation services with its fully owned installation vessel Skagerrak, and trenching services with the ROV based CAPJET.

SELECTED REFERENCES:Among our references are Atlantis, NaKika, Ormen Lange, Snøhvit, Norne, BP King, Tyrihans, Mexilhao, Usan and Tambau and Urugua. Read more on www.nexans.no/umbilical

40

a.S NYMoContact person: Einar AanonsenTitle: Director Projects and MarketsE-mail address: einar.aanonsen@jjuc.no Company website: www.nymo.no

COMPANY DESCRIPTION:AS Nymo is a full-service engineering, procurement and construction company within the oil & gas and process industry. Nymo offers total solutions to customers and has earned confidence for versatility, reliability, quality service, timely delivery, good project management and commitment to HSE excellence.A.S Nymo has extensive experience and expertise in designing and fabricating offshore drilling packages.

PRODUCTS:Our staff is well experienced in detail design, procurement of materials, fabrication and testing of complete units for seabed installation. The fabrication skills include all rel-evant material qualities used in subsea equipment.Units delivered:• Manifolds for multi well field developments• Satellite production wellhead frames• Injection wellhead frames

• Seabed separation and compression units• Prefabricated seabed pipe branch connections• Platform tie-in pipelines• Risers

SERVICES:AS Nymo has since 1990 fabricated subsea structures and piping systems for subsea production and injection wells. In total number approx 100 units are delivered mainly for the Norwegian continental shelf. Most known fields delivered to are Troll Oil Province in the North Sea and Snøhvit Gas field in the Barents Sea. Detail engineering is available for structural and piping disciplines. Special subsea platforms with depth of 10 m and 30 m are available for submerged testing. Overhead lifting capacity of 200 MT.

SELECTED REFERENCES:Some major projects:• Tordis, EPC contract subsea manifold• Snorre B, Fabrication of subsea manifold and structures• Troll Olje, Fabrication of 23 off manifolds, 5 off riser

bases and 5 off satellites• Snøhvit, 6 off template manifold subsea• BP Angola Block 18, Well jumper kit fabrication• Alvheim, Manifolds and Riser bases

41

 Parker MaritimeContact person: Rolv JohannessenTitle: Marketing ManagerE-mail address: rj@parkermaritime.noCompany website: www.parkermaritime.no

COMPANY DESCRIPTION:Parker Maritime is business unit of Parker’s Energy Products Division (EPD) that provides global subsea metrology, survey, and dimensional control and installation solutions. Our products and services are catered to the offshore oil, gas and maritime markets. When your project requires the highest performance and accuracy, our solu-tions will surpass your expectations.

PRODUCTS:Parker Position Monitoring systems, ParkerPMS™ and ParkerRPMS™

SERVICES:Parker Maritime is a provider of many services related to the oil, gas and maritime industries, including: Subsea metrology (SICAMS®), on and offshore dimensional control survey, windmill installation attitude survey, vessel and ROV gyro attitude verifications, GPS ‘health-checks’, and seabed mapping. In addition, Parker Maritime has developed a position monitoring system, ParkerPMSTM for shuttle tankers and vessels.

SELECTED REFERENCES:Statoil, Subsea7, Technip, Aker Solutions, Petrobras, Teekay, Knutsen OAS, Hyundai, Canship Ugland, Saipem, Maersk, DeepOcean, Oceaneering, WestCon, Bibby Offshore, BP, Kongsberg Maritime, Fluor.

42

Pg Pump Solutions (Ing. Per gjerdrum aS)Contact person: Per E. SørumTitle: VP. Bus. DevelopmentE-mail address: per.sorum@pergjerdrum.noCompany website: www.pergjerdrum.no

COMPANY DESCRIPTION:PG Pump Solutions has delivered innovative and tailor-made pump solutions to the offshore and marine markets in more than 20 years. Base on pump knowledge and experi-ence, as well as high-quality sub-suppliers and numerous pump start-ups and services, the Oslo-based company is expanding activities to cover worldwide deliveries of a chal-lenging and new subsea liquid pump solution.

PRODUCTS:PG MAPS – Subsea Pump and control systemsPG-MAPS – Multi Application Pump Solution for offshore and subsea – is designed for abrasive liquid handling. The

multipurpose pump for heavy duty pumping applications is a new and unique pumping solution developed by combin-ing hose diaphragm pump heads and reciprocating power end using a permanent magnet linear electric motor. The unit has high pressure rating combined (< 350 bar) with superior volume capacities.

SERVICES:The PG service department and workshop in Drammen area performs repair, startup and commissioning of PG pumps supplies, worldwide.

SELECTED REFERENCES:The PG MAPS prototype is undergoing comprehensive testing throughout 2011.

43

PresensContact person: Martin NygaardTitle: CFO/Bus DevE-mail address: mail@presens.comCompany website: www.presens.com

COMPANY DESCRIPTION:PRESENS supply high performance sensor solutions for subsea oil and gas and space. PRESENS develops and manages the entire chain from core technology to sensor system and is one of the market leaders for high perfor-mance sensors. The company has state of the art devel-opment and production facilities in combination with the office facilities in Oslo, Norway. Presens first subsea field installations was in 2000 and several thousand sensors are installed subsea worldwide delivering extremely accurate and stable measurement of pressure and temperature.

PRODUCTS:PRESENS’ sensor systems are specifically made to deliver high-accuracy pressure, temperature and flow measure-ments in severe environments such as offshore oil and gas operations throughout the life of the field. The highly reliable and accurate data generated by our sensors is ideal input for advanced monitoring and control systems – allowing them to operate to their full potential.

Presens sensors are being used by market leaders in a wide range of subsea applications. Examples includes subsea production trees and manifolds, separation/pro-cessing, pumping systems, pipelines, water and chemical

injection, production system intervention, ROV/AUV, tran-sponders/deep water positioning, depth measurement, sea bed mapping etc.

Product portfolio includes pressure and temperature sen-sors for subsea production trees, differential pressure sen-sors for flow calculations such as in single and multiphase meters, flow sensors for subsea processing and boosting, single phase flow meters, chemical injection valve pressure sensor etc.

SERVICES:Presens can provide key capabilities required for develop-ing, evaluating and qualifying new products / technology for subsea. Presens has distinctive know-how covering the entire technology chain from technology development, to the core sensor to mechanical packaging. Presens is recognized as having world class engineering capabilities within multiple fields such as sensing technology, mechani-cal design, electronics design, software, weld design & assembly, and subsea qualification and documentation.

REFERENCES:PRESENS has delivered O&G subsea sensors worldwide since 1999 enabling extremely accurate and stable mea-surements for advanced monitoring and control systems allowing them to operate to their full potential. More than 6000 sensors are installed subsea in all major subsea regions. Presens is delivering to all major subsea produc-tion system suppliers and oil&gas companies.

44

Proserv Norge ASContact person: Morten C JensenTitle: Sales & Marketing ManagerE-mail address: M.Jensen@proserv-group.comCompany website: www.proserv.com

COMPANY DESCRIPTION:Proserv set for strong international growth and expansion Production technology services provider Proserv has created a new platform for robust and sustainable growth after restructuring its business into a fully integrated global organisation with a new company brand and fresh strategic focus.

The new organisation, with global headquarters located in Westhill, Aberdeen, UK, brings together five respected and successful companies under the new Proserv brand. Leveraging the strong market positions, track records and capabilities of these individual companies, Proserv can offer clients an enhanced portfolio of field-proven comple-mentary technologies, in-depth engineering expertise and world-class service.

The five businesses now known as Proserv were: Proserv Technology, Proserv Offshore, Hydrafit Subsea, located in north east Scotland and Houston-based Gilmore Valve and Argus Subsea. The Proserv businesses have enjoyed well-established reputations in their specialist markets; Proserv Technology as a leading provider of Instrumentation and Calibration, Oil and Gas Sampling and Automation and Controls products and services, and Proserv Offshore as a leading specialist of IRM and Decommissioning services.

The other three were formerly part of the Galathea Group, which was the parent company to some of the most innovative oilfield service companies in the world. Hydrafit Subsea, which is located at Echt, near Aberdeen, is dedi-cated to the design, manufacture and service of subsea production equipment. Established in 2002, Hydrafit is a

trusted partner for subsea tree manufacturers around the world and one of the few service companies able to carry out the build, test and SIT of subsea tress for OEM manu-facturers and end users alike.

Gilmore Valve was established in the 1960s and has developed an enviable reputation as a world-class valve designer and manufacturer specialising in high-pressure, high-performance hydraulic valve solutions for the drilling, production and subsea markets. Argus is an innovative company created to meet the growing needs of the highly demanding subsea production sector. Argus focuses on the design, manufacture and delivery of subsea trees ideal for marginal-field developments and fast-tracked projects, where time is critical and quicker deployment can lead to great opportunities and success for operators.

In June 2011, a new financing arrangement was completed for $115m which allowed the Proserv and Galathea com-panies to merge into one single entity. As one company, Proserv is a leading player in the energy services market, focused on maximising recovery, minimising costs and enhancing sustainability for it clients.

Proserv employs approximately 850 people in over 20 operating centres based in 10 countries. Annual revenue is currently in the region of $200m. Intervale Capital, an energy-focused private equity firm that manages a $280 million dollar private equity fund, is the majority shareholder of Proserv.

PRODUCTS:Decommission, Subsea sampling, subsea valves, Umbilical termination unit, Subsea HPU, Work over control system, Smart Well Panel, Wellhead Control module, Autoclave High pressure fittings subsea,

SERVICES:Commisioning service, testing, flushing, instrumentation.

45

REINERtSEN aSContact person: Geir T. SuulTitle: Director Business DevelopmentE-mail address: geir.suul@reinertsen.comCompany website: www.reinertsen.no

COMPANY DESCRIPTION:Reinertsen AS is a privately own company supplying turn key and EPCI projects within Oil & Gas and industry, and Civil Engineering, construction and transport. The company was established in 1946 and is today 100% owned by Erik and Torkild Reinertsen.

In 2010 Reinertsen presented a 400 million Euro turnover. With its 2100 employees, REINERTSEN are represented in Trondheim (main office), Orkanger, Oslo, Bergen, Gothenburg, Stockholm and Murmansk.

REINERTSEN has been a supplier of services and prod-ucts to the oil & gas industry since 1980, and is one of the largest engineering offices in Norway. The organization is recognized by a high educational level, and extensive experience. REINERTSEN has many large and demanding clients requiring streamlined execution of large projects. This has driven a fast development of systems within IT, HES&QA, engineering, procurement and material management. REINERTSEN cover all phases of a project, from early conceptual studies through detail engineer-ing, procurement, fabrication, installation and operation/maintenance.

PRODUCTS:REINERTSEN is an EPC provider of Subsea facilities, manifolds / templates / riser-bases / protection structures /pipeline end terminations (PLET).

SERVICES:Reinertsen provides services related to all phases of a project ranging from pure Engineering services and studies through to full EPCI services.

Reinertsen provides engineering services related to subsea systems – studies and engineering of subsea infrastruc-ture; Pipeline engineering & Tie-ins – including topside modifications; Technical analysis, studies to detail design of structures, piplines, flowlines, risers, and umbilicals.

SELECTED REFERENCES:

ÅSgaRD SUBSEa CoMPRESSIoN DEtaIL ENgINEERINg (2011, ongoing) Client: StatoilDetail engineering of all pipelines and PLEM’s and PLETs for the Åsgard subsea compression project including sev-eral tie-ins, spools as well as routing of power cables and umbilicals

oRMEN LaNgE SUBSEa CoMPRESSIoN (2010, ongoing)Client: Norske Shell ASOrmen Lange Subsea Compression – Field lay-out and flowline concept studies. Reinertsen had the overall responsibility for field-layout and cost and schedule esti-mates for the flowline system.

SNØHVIt FUtURE (2011, ongoing)Client: Statoil Conceptual study of Snøhvit Future Development including conceptual flowlines and pipeline engineering and overall field layout development including optimization of number and location of PLEM`s and flowline manifolds.

SKaRV SURF FEED (2005–2007)Client: BPA complete design of the subsea systems, umbilicals, risers, flowlines (SURF) and the gas export pipeline to Åsgard Transport System.

oRMEN LaNgE PIPELINE ENgINEERINg (2003 to 2008)Client: Norsk HydroDetail engineering of 2 x 30” multiphase pipelines, 2 x 6 5/8” MEG lines and two umbilicals from the Ormen Lange Field to Aukra. The engineering also includes the landfall and the first 33 km of the 42” Langeled pipeline.

HEIDRUN FIELD DEVELoPMENt PRoJECt (1991)Client: ConocoThe contract included detail engineering and procurement assistance for:• 56 slot template structure• Positioning pile guide frame for installation of TLP foun-

dation pods• Tie-in of 28” gas pipeline, 16” oil pipeline system incl.

PLEM and flexible riser 6x14” exp./imp. lines, and 8x8 flowlines

• 28” gas export riser system• 16” oil export riser system

46

RoxarContact person: Vincent VieugueTitle: Vice President Sales & Marketing E-mail address: Vincent.vieugue@roxar.comCompany website: www.roxar.com

COMPANY DESCRIPTION:Roxar is a leading provider to the oil & gas industry of advanced technology for production optimisation, production regularity and improved decision making. Our technologies help operators maximise their reservoir’s performance.

Roxar understands reservoir description and flow dynam-ics. Our technologies take operators through the entire reservoir lifecycle from interpretation of geological data through to collection and analysis of real-time production data. Roxar’s 3D reservoir geological modelling and simu-lation software, and our comprehensive range of topside, subsea and downhole metering and monitoring instrumen-tation maximises return from your reservoir assets.

PRODUCTS:Multiphase meters (Topside / Subsea / Downhole)

Wetgas meters (Topside / Subsea)Sand monitors (Topside / Subsea)Pig detectors (Topside / Subsea)Pressure and Temperature gauges (Downhole)Roxar downhole Wireless PT sensor systemChemical Injection valves (subsea)Intrusive Corrosion Monitoring (Topside / Subsea)Non Intrusive Corrosion Monitoring (Topside / Subsea)Field Signature Method (Topside / Subsea)Subsea ROV retrieval systemProduction management Software

SERVICES:TrainingEngineering supportGlobal on-site supportRemote technical supportPreventative maintenanceService project managementTechnical service agreements

SELECTED REFERENCES:Please contact Roxar for references.

47

Safetec Nordic aSContact person: Øyvind ElsethTitle: VP Sales and MarketingE-mail address: oel@safetec.noCompany website: www.safetec.no

COMPANY DESCRIPTION:Safetec is a leading provider of integrated risk and asset management services. With a focus on minimum downtime and safe production, Safetec offers life-cycle optimisation services, from concept evaluation to decom¬mis¬sioning.

Safetec has provided the worldwide offshore, maritime and land based industries with services since 1984. We are committed to helping customers reduce risk, increase safety, improve health and environmental performance and enhance profits.

Our customers are served from our offices in Norway (Trondheim, Oslo, Stavanger and Bergen) the UK (London and Aberdeen) and Malaysia (Kuala Lumpur). In addition,

Safetec HMS Utleie provides specialist manning services.Safetec has more than 100 skilled employees working with Risk and Reliability Analyses, SHE, Safety Management and Emergency Preparedness – delivering insight with foresight!

SERVICES:Reliability, availability and maintainability analysis Production Performance Studies Reliability and vulnerability of safety systems SIL-analysis and PFD calculations Collection and analysis of experience dataRAMS-management (reliability, availability, maintainability and safety management)Qualitative methods REGOP (Regularity and Operability) Failure mode, effects and criticality analysis (FMECA)Hazard identification (HAZID) and HAZOP Frequency evaluations of all major events Consequence evaluations Impairment evaluations Quantification of risk to personnel, environment and asset

48

Sandvik Riser Technology ASContact person: Tore SalteTitle: Sales ManagerE-mail address: tore.salte@sandvik.comCompany website: www.clikloc.com

COMPANY DESCRIPTION:Sandvik Riser Technology AS design and manufacture the brand Sandvik ClikLoc® connector and riser tubes to be used within well completion and intervention work. Sandvik Riser Technology is a part of Sandvik Material Technology AB who is a world leading manufacture of high value-added products in advanced stainless steel and special alloys.

PRODUCTS:The Sandvik ClikLoc® – a revolution in multiple make and break connections

The new, patented, high performance ClikLoc from Sandvik Riser Technology AS combines hook-up time savings with increased operating safety. Make and break can be reduced by at least 80%, and since no loose components or make-up tool are involved, the hazard of falling objects has been eliminated.

Designed and manufactured in accordance with ISO 13628-7 and DNV certified for completion and workover riser systems, the Sandvik ClikLoc® is a bayonet type, stab-in, self centering coupling which means no rotation of the riser during set-up. The metal to metal seal needs very low pretention – the weight of the riser joint is sufficient – and the seal guaranteed when locked. The seal is also reusable allowing multiple make and breaks.

Sandvik ClikLoc® is suitable for sour and standard service, the connector operates at temperatures up to 121ºC and pressure up to 10.000 psi.

The Sandvik ClikLoc® is made from powder technology, super duplex stainless steel grade Sandvik SAF 2507.

Typical applications are coil tubing High Pressure stack-up risers, work over and completion risers and hook-up of landing string to slick (case wear) joint, flow head and BOP in CT and WL operations.

SELECTED REFERENCES:When performing production well cleanup operation to a semi submersible drilling rig a landing string system is connected to the wellhead. Using traditional technology, the last connection of the landing string is made by rotating the assembly above the surface flow tree or use flange con-nection who is time consuming.

BP Norway at BP SKARV and Marathon Norway at ALVHEIM choose to use the Sandvik ClikLoc®. The customer’s concludes: “Overall we have been very pleased with the connector. It has certainly made connecting the surface flow tree assembly and above equipment much simpler and safer than other connection.”

The larges foreign operator in Norway continental shelf was looking for a safer and time saving alternative to the con-ventional rigging of coil tubing stack up risers. Conventional rigging of a 30-meter tall riser tower involves more than 900 potentially falling objects. One single bolt can weigh as much as 4 Kg.

By employing Sandvik ClikLoc® at Ekofisk X in the North Sea for well intervention, the oil company able to increase crew safety dramatically. Speedy rig up and rig down has minimized the time the well intervention riser tower has to occupy valuable time on the platform skid deck.

Other company using the Sandvik ClikLoc® is Baker Hughes, Shlumberger and Statoil

49

Scanmudring aSContact person: Niels-Henrik Brodtkorb Title: General ManagerE-mail address: postmaster@scanmudring.comCompany website: www.scanmudring.com

COMPANY DESCRIPTION:Your preferred subsea Dredging and Excavation partner.Scanmudring AS performs special underwater work tasks – removal or relocation of any type of seabed soil is our specialty. Operations are successfully carried out in deep water, difficult conditions and in areas with restricted access worldwide.Scanmudring believes in and supports the Zero Accident Philosophy.Scanmudring AS Quality management system is certified according to ISO-9001.Scanmudring AS Health and Safety management is certi-fied according to OHSAS 18001.Scanmudring AS Environmental management system is certified according to ISO 14001.

Scanmudring customizes our subsea machinery configura-tions, and performs efficient dredging and excavation.We aim to be your preferred partner in bringing a seabed area back to Mother Nature, without compromising safety.

MAChINERY AND TOOLS:ScanmachinesScancrawlerScandredgesScanrovdredges

Scandredge Manipulator armsScangrabberScancutters

SERVICES:Subsea precision dredgingLeveling and modification of seabedRock dump and drill cut removal / relocationAssistance and preparation for installation and decommis-sioning of platformsTool carrier for excavation, cutting and others hydraulically controlled equipmentPipeline and cable deburial in connection with maintenance workSubsea construction and excavation taskProject planning and preparationsUmbilical/wire emergency cutterLimited special trenching tasksBoulder / rock relocationFeasibility studies

SELECTED REFERENCES:Dredging for platform decommissioning on Ekofisk/HMC/ConocoPhillipsSpudcans Dredging on Shearwater/Technocean/ShellDredging and Trenching services on Valhall/Technocean and Technip/BPCable deburial Oslofjord/NorNed/StatnettSeabed Leveling on Ormen Lange/DOF Subsea/Statoil

For more information please download our Track Record on www.scanmudring.com

50

Siemens oil & gas Subsea SolutionsContact person: Henrik Steine MadsenTitle: Sales Manager – EuropeE-mail address: Henrik-steine.madsen@siemens.comCompany website: www.siemens.com/oilgas

COMPANY DESCRIPTION:Siemens Oil & Gas Solutions has been a major player in the Norwegian offshore sector since early 1970s, and keeps expanding its activities to key offshore markets around the world. The company’s global offshore activity is headquartered in Norway. Siemens Subsea Solutions is focused on the supply of systems and products to the subsea industry, that can improve the reliability and reduce the capital expenditures and/or operational cost for our customers.

PRODUCTS:Siemens Subsea Systems are developing and supplying state of the art solutions for power supply in order to enable subsea processing and control and monitoring systems for increased functionality and improved data quality from the subsea production systems. Siemens Subsea Systems also supply power supply systems for Direct Electric Heating systems.• Subsea Power Grid – Subsea transformers, switches and

variable speed drives• Siemens Subsea Controller – Subsea control units for

various applications• Siemens DEH Power Supply – Power supply for DEH

including state of the art control and protection solutions

Siemens Subsea Products supplies products and tailor-made solutions in the fields of subsea distribution, seismic equipment and oceanology. The sealing and termination technology Siemens Subsea Products have supplied for more than 35 years indicate our reliability and drive to deliver the best products to the best actors in the market. Our first “Anguila” jumper was developed for Snorre B in 1993 and have become the industry standard for the Oil & Gas sub sea activity.• Subsea distribution – Production of electrical, fibre optic

and hydraulic jumpers. Range from high-voltage switches to pressure-compensated electrical or fiber optical system.

SERVICES:Siemens offers customized service plans that can comprise troubleshooting, 24/7 hotline support, spare parts delivery, repairs, system upgrades and maintenance operations. Siemens’ strong local presence ensures that your service needs are met locally. Within Siemens Subsea Products our strength and specialist competence lies in the produc-tion of additional equipment, modifications and upgrading of equipment, and we can offer a “One Stop Shop” for subsea services of signal and cable system. From our systems engineering team we supply services like subsea engineering, field lay-out planning, planning and proce-dures for subsea operations, FEED studies and other tasks related to the subsea industry.

SELECTED REFERENCES:Subsea control systems: • Snorre UPA, Well Control Units• Snorre B, Well Control Units, Downhole Instrument and

Control System, Sand Monitoring System

Subsea power systems: • Procab, Petrobras, subsea transformer• EMGS, Subsea EM source (Converter) for geophysical

data acquisition (16 units)• Various subsea motors• High Power Change Over Switch – Various projects

(Lyell, Yme, Athena)

Subsea distribution:• Various projects (Troll B & C, Heidrun/ SSP, Norne, Fram

Vest, Troll, Snorre B + +)

Subsea engineering:• Subsea enclosures for Ormen Lange Subsea

Compression Pilot (VSD, UPS, Circuit Breakers)• Various FEED, life extension and marine operation

studies

51

SPt groupContact person: Christian A. AUbertTitle Senior Vice PresidentE-mail address christian.aubert@sptgroup.comCompany website www.sptgroup.com

COMPANY DESCRIPTION:Value creation and safe operationsSPT Group is the leader in modelling for the oil and gas industry. Customer supported innovation and research has been at our core for more than 30 years, and we have successfully transformed R&D into software solutions and consulting services that deliver trusted insight and real impact. With more than 200 highly skilled professionals worldwide, we deliver advanced software and consulting services to help our customers solve multiphase flow and reservoir engineering challenges.

PRODUCTS:OLGA: Dynamic simulator for engineering of flow

of oil, water and gas in wells, pipelines and receiving facilities

Drillbench: Dynamic and steady state simulator for advanced drilling engineering and well control

OLGA Online: The modelling centrepiece for real time flow management in integrated operations

WELLFLO: Steady state simulator for well production and UBD/MPD analysis

PIPEFLO: Steady state simulator for flow assurance. PIPEFLO Dynamic combines steady state with a limited dynamic features

FORGAS: The most reliable and efficient solution to model some of the largest gas fields in the world

MEPO: Multiple realisations for robust prediction of reservoir performance, history matching and forward modelling MEPO integrates the tools used in common work processes and automates tasks using advanced methodologies to deliver better and quicker results.

SERVICES:SPT Group has a worldwide network of offices that offers competence and support to customers. Our consultants play a major role in our business by building the crucial bridge between the users and the developers and providing product feedback and market understanding.

SPT Group believes consulting services to be an important factor in guaranteeing our customers the best service and the best products in the market.

The market for OLGA has, in part, been developed by SPT Group, offering consulting services that deliver state-of-the-art solutions to our customers.

SPT Group has access to unique competence and tools within hydraulics and well engineering and planning.

MEPO continues the SPT Group model of offering consult-ing as a link between users and developers by providing product feedback and market understanding. The MEPO team has fine-tuned this process and strives not only to sell software and services, but also to generate an increased value and to identify uncertainties for the client’s project.

REFERENCES:Over 500 clients in 50 different countries, including:• Integrated Oil and Gas Firms: Majors, Super-majors,

National Oil Companies and independents• Leading subsea and onshore equipment vendors• Integrated and specialist engineering firms• Global and local service providers• Engineering software providers

52Page 1 of 25

Subsea 7 S.a. announces third Quarter 2011 Results Luxembourg – November 2, 2011 – Subsea 7 S.A. (formerly Acergy S.A.) (the “Group”) (Oslo Børs: SUBC) announced today results for the third quarter 2011 which ended on September 30, 2011. The combination between Acergy S.A. and Subsea 7 Inc. was completed on January 7, 2011. Upon completion, Acergy S.A. was renamed Subsea 7 S.A. As a result of the combination and the change in fiscal year, the results for the first three quarters of 2011 incorporate the ten-month period from December 1, 2010 to September 30, 2011 for Subsea 7 S.A. and the results of Subsea 7 Inc. following the date of combination. Unless otherwise stated, the comparative period is the three and nine months ended August 31, 2010 for Acergy S.A.

ForInformation

Three Months Ended

ten Months Ended

Nine Months Ended

In $ millions, except Adjusted EBITDA margin % Sep.30.11 Unaudited

Aug.31.10 Unaudited

Sep.30.11 Unaudited

Sep.30.11 Unaudited

Continuing operations:

Revenue 1,432 495 4,059 3,843

adjusted EBItDa1 279 124 776 752

adjusted EBItDa margin %1 19.5% 24.9% 19.1% 19.6%

Net operating income 200 89 504 491

Net income 173 59 344 336

Backlog 7,903 3,496 7,903 7,903

Cash and cash equivalents 641 548 641 641

Net assets 5,740 1,080 5,740 5,740

Earnings per share – in $ per share (Diluted) Continuing operations $0.45 $0.24 $0.94 $0.89 total operations $0.45 $0.27 $0.94 $0.89 Weighted average number of common shares and common share equivalents outstanding

379.0m 206.8m 362.3m 379.9m

Jean Cahuzac, Chief Executive Officer, said: “We have delivered a good quarter in line with our expectations. These results reflect high offshore activity in West Africa on large projects, good vessel utilisation in the North Sea and a strong contribution from our Joint Ventures. Nevertheless, the higher activity levels in the North Sea are, as expected, still impacted by margin pressure on contracts awarded in 2010. Operational delays on projects in the North Sea have also impacted these results. For fiscal year 2011, we expect to deliver an Adjusted EBITDA in line with expectations.

Despite recent macroeconomic turmoil we continue to see good order book momentum and our backlog remains strong and diverse. I am very pleased with the progress we are making integrating the Group and remain confident with our ability to meet our objectives.”

Outlook: 2012 will be a year of progress for Subsea 7 but it will also be a transition year. West Africa will move through a period of lower offshore activity on those projects awarded over the past 18 months. We also foresee an above average impact arising from planned dry-docks while in the North Sea we expect to see improved margins year-on- year.

1 For explanations and a reconciliation of Adjusted EBITDA and Adjusted EBITDA margin, please refer to Note 7 to the Condensed

Consolidated Financial Statements included herein.

Subsea 7Contact person: Siri Skaar StornesTitle: Communication ManagerE-mail address: Siri.skaar.stornes@subsea7.comCompany website: www.subsea7.com

COMPANY DESCRIPTION:We are a seabed-to-surface engineering, construction and services contractor to the offshore energy industry worldwide.

PRODUCTS:Pipeline ServicesSubsea/Diving/ROV Technology ServicesEngineering ServicesSubsea ServicesSubsea Construction ServicesPipelaying/Cable ServicesCranes/Heavy lift ServicesMarine Installation ServicesSubsea Pipeline ServicesGeophysical and Hydrographic Site Survey ServicesRisersUmbilicalField Development

SERVICES:We are experts in the design, fabrication, installation and commissioning of seabed-to-surface projects.

Our extensive experience in deepwater Subsea, Umbilical, Riser and Flowline (SURF) and Life-of-Field projects has made us the preferred contractor and trusted partner for national and international energy companies.We provide integrated services and we plan, design and manage the delivery of complex projects in harsh and chal-lenging environments.

Many of our activities fall within Engineering, Procurement, Installation and Commissioning (EPIC) project delivery, where our experience is based on a proven track record of successful delivery.

SELECTED REFERENCES:Africa & Gulf of Mexico • Addax Okwori & Antan• BP Block 18 • BP Block 31 PSVM • BP Greater Plutonio • BP Thunder Horse• Chevron Tombua Landana, Africa• ExxonMobil EPC2B• Marathon Droshky• Total Girassol Pipeline Repair• Total Pazflor• Shell Perdido

Asia Pacific & Middle East • Apache Van Gogh Development Project• Santos Casino-Henry• Woodside Pluto

Brazil • Chevron Frade• Petrobras P-55 Export Lines• Petrobras PRA-1• Shell BC-10

North Sea, Mediterranean & Canada • BG Miskar• BP Skarv• Encana Deep Panuke• Shell Flags Hot Tap• Shell Underwater Services Contract• Statoil Vega• Total Jura West• Hess South Arne Bundle

53

technip in NorwayContact person: Tim CromeTitle: Director Sales and Business DevelopmentE-mail address: TCrome@technip.comCompany website: www.technip.com

COMPANY DESCRIPTION:If energy were easy, there would be no need for a company like Technip. We work with our clients, today and tomorrow, wherever they are, to bring energy to the World. We will continue to contribute to their success through our constant customer focus and our integrated and sustainable project approach.

Technip’s mission is to deliver safe and successful energy projects across the World for the benefit of all our stakeholders. ‘Take it further’ is our approach to business, partnerships and aspirations. It conveys the unique mes-sage that Technip intends to excel in what we do, suc-ceeding together, exceeding expectations and innovating continuously.

Within the domain of subsea hydrocarbon field develop-ment, Technip’s main focus area in Norway, our activities cover the design, manufacture and installation of rigid and flexible subsea pipelines and umbilicals. Technip is a key integrated player in this market thanks to our portfolio of state-of-the-art subsea pipe technologies and our industrial and operational assets.

Technip’s workforce in Norway comprises ~500 employees out of ~25,000 worldwide, is split between the main office in Sandvika, near Oslo, and offices in Stavanger and Haugesund. Since the mid 1990s Technip in Norway has been playing a leading role in the development of subsea fields, including the infield transportation and flexible riser systems essential for the development and implementation of subsea and floating production facilities. The Technip spoolbase in Orkanger is specialized in the welding of exotic pipeline materials and the fabrication of high specifi-cation pipelines, such as Pipe-in-pipe systems and HDPE

lined water injection flowlines, and has delivered many hundreds of kilometers of infield flowlines for installation by reeling on the Norwegian Continental Shelf.

PRODUCTS:Rigid steel pipelines for installation by the reel method in sizes up to 16” OD (18” from 2013), with a unique track record in the welding of exotic materials (13%Cr, Clad, Lined) and fabrication of highly insulated passive Pipe-in-Pipe systems and the newly developed Electrically Trace Heated (ETH-PIP) system.

Flexible flowlines and risers in sizes from 2” to 18” ID for design conditions matching water depths and oil and gas production profiles for the most severe subsea develop-ments. Flexible manufacturing plants in France, Brazil and Malaysia.

Customized umbilical systems for subsea development projects, with manufacturing plants in Great Britain, United States of America, Angola and Malaysia.

SERVICES:EPCI Project Management services for Onshore, Offshore and Subsea projects.

Offshore construction with an extensive fleet of specialized vessels, including: Reel-lay vessels for rigid pipelines; Deep Blue, Apache II and Deep Energy (available in 2013), Diving and Heavy Construction vessels; Skandi Arctic, Skandi Achiever, Deep Pioneer, Deep Constructor and Normand Pioneer and specialized Flexible installation ves-sels for the Brazilian market; Sunrise 2000, Skandi Nitteroi and Skandi Vitoria.

SELECTED REFERENCES:For references within any of the various fields of com-petence in Technip please check the internet site given above or contact the Director for Sales and Business Development for Technip in Norway at the email address stated.

54

Techno Dive ASContact person: Bjørn UtsethTitle: General ManagerE-mail address: post@techno-dive.no Company website: www.techno-dive.no

COMPANY DESCRIPTION: Your worldwide partner for safe- and efficient under water work.

PRODUCTS:Under water paint. Together with Lestin ag in Austria, we present the only functional under water epoxy paint, applied by our divers carrying brush and bucket under water. The product applied guarantee a strong adhesion and quality totally preventing corrosion for years. The product is tested

by DNV and used both for sealing purposes as well as for preventing corrosion on semis, ships and quays worldwide.

SERVICES:Special Periodic Surveys (SPS), Underwater inspections, Thruster replacement/work/change-outs, Structural repairs and upgrades (uw welding, sandblasting and painting), Anode replacement in wet or dry conditions, Blinding of valves and sea chests, Overhaul of valves, Hull cleaning and polishing, Pulling of Tail shaft, Underwater engineering, Equipment – Dry habitats

SELECTED REFERENCES:Techno Dive is approved by all major class societies as DNV, ABS, Bureau Veritas Norge and Lloyds.And we are approved supplier to Statoil, BP, Shell and rig owners Transocean, Noble, Seadrill, Dolphin etc.

55

tESS asContact person: Stefan JohnsenTitle: Sales Manager SubseaE-mail address: Stefan.johnsen@tess.noCompany website: www.tess.no

COMPANY DESCRIPTION:TESS is Norway´s leading supplier of engineered systems and services for hoses and hydraulics for the OIL & Energy industry. TESS coordinates more than 100 service centers nationwide with approved workshops and Hose Engineers approved by DnV. TESS is also located in Scotland (Aberdeen), Denmark (Esbjerg) and Brazil (Macaé). TESS is recognized as a reliable supplier of high quality products and services for more than 40 years. 800 employees served a turnover of more than USD 333 Million in 2010.

PRODUCTS:Our experts and engineering staff are continuously improv-ing our product range enabling TESS to meet the present

and future demands. TESS is innovative, and cooperates directly with some of the world’s leading manufactures. TESS offers:• Hydraulic Flying Leads (HFL) and bundles• Subsea umbilical’s• Industrial and hydraulic hoses

SELECTED REFERENCES:• Statoil• FMC Technologies• Aker Solutions• Shell• Exxon Mobil• Schlumberger• Maersk

56

trelleborg offshore Norway aSContact person: Ingrid ThomasgårdTitle: Marketing CoordinatorE-mail address: Ingrid.thomasgaard@trelleborg.comCompany website: www.trelleborg.com/offshore/no

COMPANY DESCRIPTION:Trelleborg Offshore Norway is a part of Trelleborg Offshore which has a global presence with many class leading manufacturing facilities around the world. We serve demanding industries within the offshore and defense sector in addition to general industry Since 1896 we have taken advantage of the well-known rubber proper-ties to evolve the company from producing footwear into supplying highly engineered products. Our competence has been reined into advanced polymer technology, serving the worldwide market with corrosion- and fire protection and thermal insulation together with molded products

PRODUCTS AND SERVICES:Trelleborg Offshore Norway produces tailor made solutions in rubber for protection of other materials, against corro-sion, fire, heat and wearing. Rubber also gives excellent

performance as a construction material in vibration and shock dampening, in elimination of structural noise and is the ultimate material for sealing systems.

We are highly experienced in developing tailored solutions combining the highest level of performance and competi-tiveness and we are in constant contact with our customers in order to define their particular requirements. The innova-tion process is conducted on three levels:

• Basic know-how in the physics and chemistry of polymers• Experience and knowledge of polymers applications• Design of products including production an installation

REFERENCES:Corrosion- and Passive Fire Protection to Totals Libondo project.Fire-protection of main legs on JRP jacket and JLq Platform at the Jasmin project of ConocoPhillips.Thermal insulation/high temp to BPs Devenik project.Fire water/deluge system on the ConocoPhillips project Eldfisk 2/7B

57

Vector aSContact person: Svend Skjeggedal Title: Managing DirectorE-mail address: svend.skjeggedal@vectorint.comCompany website: www.vectorint.com

COMPANY DESCRIPTION:Vector Technology Group (VTG) is a major single source supplier of bespoke compact sealing solutions for the oil & gas, subsea and topside markets. It’s core products are OPTIMA a Subsea ROV operable subsea connector, the SPO Compact Flange, and the TECHLOK Clamp con-nector; for use in Offshore platforms, subsea installations, FPSO’s, production plants, refineries and riser and swivel application. The core features are high integrity and mini-misation of weight and space, allied to installation time and maintenance cost reductions. Vector Technology Group’s high level of technical expertise, broad industry knowledge and problem solving capabilities have earned VTG industry wide recognition, helping to build close working relation-ships with customers whilst delivering high quality products and customised solutions on-time. In combination with an efficient supply chain VTG is able to deliver both flexible and fast track deliveries, in addition to executing larger projects. Its products cover pressure classes up to 15,000 psi and have a proven track record within High Pressure / High Temperature and harsh environment applications where fatigue, high bending and stress loads are of primary importance.

PRODUCTS:SPO Compact Flange: The SPO Compact Flange is a smaller and lighter proven alternative to conventional ASME flanges. It features a fully Static Connection where loads are transferred via metal to metal contact of flange faces, thereby, completely eliminating the potential for movement between the assembled SPO Compact Flanges whilst under dynamic loading. SPO Compact Flanges incorporate two independent metal to metal sealing mecha-nisms, offering High Integrity Sealing with a very limited leakage probability. With our recent release of the 5K, 10K and 15K standards, the SPO Compact flange now offers the most comprehensive range of bolted connectors, cover-ing all piping classes. We also have our full range of Swivel Ring Flanges, available in all sizes and pressure classes, making the SPO Compact Flange the perfect flange con-nector for subsea applications.

Optima Subsea Connector: The Optima subsea connector has been developed in close collaboration with some of the industry’s major operators and features a simple & efficient design which reduces initial cost and installation time. The Optima makes use of unique angular and radial alignment capacity and the male-female hub profiles ensure the most accurate alignment during assembly. The Optima makes use of our DuoSeal technology, a double pressure ener-gised metal seal preventing internal or external leakage (alloy 725 or equivalent as standard).

It has been engineered for remote operation in the most demanding deep and ultra deep water conditions, for use in depths up to and exceeding 4,000 meter. The Optima is available in size 2”–36” NPS and pressure ratings up to 15,000psi.

Techlok Clamp Connector: The Techlok Clamp Connector has only 4 bolts to tighten rather than up to 24 on a con-ventional flange, with no bolt holes to align. Maintenance downtime can be minimized thanks to it’s quicker and easier make-up and breakout. Several Techlok connectors can usually be assembled or disassembled in the time it takes for a single ANSI or API flange connection. The clamp allows a 360° rotation round the hub for easy bolt orientation and tightening. The Techlok Clamp Connector is up to 75% lighter and significantly smaller than a com-parable ANSI or API flange. The Techlok Clamp Connector has a proven track record of gas tight leak free operation when correctly installed. The pressure energised bore type seal withstands temperature and load variations which ultimately can cause conventional flanges to leak.

SERVICES:• Design engineering: FEA, inhouse assessments to recog-

nised codes, Full 3D CAD (solidworks) & CAM• Offshore / site assistance• Product training: The training course covers Introduction,

Handling & Protection, Assembly/Dis-assembly, Bolting and Damage assessment. Plus any additional compo-nents as specified by the client.

• Product Support: Dimensional Inspection, Leak investiga-tion, Damage assessment, repair management.

SELECTED REFERENCES: For a complete reference list please visit our website www.vectorint.com.

58

59

PROMOTING NORWEGIAN OIL AND GAS CAPABILITIES IN INTERNATIONAL MARKETS

INtSoK, oSLoHoffsveien 23, 2nd floorP.O. Box 631 SkøyenNO-0214 OsloNorway

Phone: +47 22 06 14 80Fax: +47 22 06 14 90E-mail: intsok@intsok.comWeb: www.intsok.com

INtSoK, StaVaNgERProf. Olav Hanssens vei 7aP.O. Box 8034NO-4068 StavangerNorway

Phone: +47 51 87 48 80Fax: +47 51 87 48 81E-mail: intsok@intsok.comWeb: www.intsok.com

INtSoK, BERgENStrandgaten 6NO-5030 BergenNorway

Phone: +47 91 39 23 27E-mail: intsok@intsok.comWeb: www.intsok.com