IoT Device Catalogue - Proximus EnCo · IoT Qualified The IoT device has been tested by Proximus and deemed compatible with one of the Proximus IoT networks. MyThings integrated The

Sensitivity: Unrestricted

IoT Device Catalogue

8 March 2019 Sensitivity: Unrestricted 1


What is Internet of Things?Connecting things (devices or sensors) to a network on which they can send data to an application. IoT networks like LoRaWANTM and NB-IoT make it possible to connect devices running on a single battery for years.


The things1.

The Connectivity

2.

The Application

3.


IoT can generate added value for your company


Better Decision making

Improve Customer Experience

Cost Reduction

New Revenue Sales

Business Process Optimization


A device you want to use is not listed in this catalogue?• All other LoRaWANTM certified devices will work on the Proximus LoRaWANTM network

and can be managed from the IoT platform MyThings, but we cannot guarantee the same level of service since Proximus has no extended experience with them..

• If necessary, Proximus can test and integrate a device for you. Please contact your Proximus contact person.

What is the Device Catalogue?

To guide our customers and partners, Proximus has created a catalogue of ready-to-use IoT devices. Enterprises can use these IoT devices as functional building blocks for their own innovative projects and solutions. These devices in combination with the IoT network and the management platformof Proximus (MyThings).

The devices listed in this catalogue have proven to work on the Proximus IoT network and we have integrated most of them into MyThings. This facilitates companies to start with IoT projects and enables scalable projects.


We advise customers to use these devices instead of any others that could be found on the internet.This way, our customers can enjoy a better service.


Classifications used in this document

We use the following different classifications for devices:


LoRaWANTM

CertifiedThe device has passed the LoRaWANTM specification and should function well on any LoRaWANTM network.

Proximus IoT QualifiedThe IoT device has been tested by Proximus and deemed compatible with one of the Proximus IoT networks.

MyThingsintegratedThe logic and language of the device has been integrated into the IoT platform. Here customers can directly see the data the devices are sending in human readable ways.

This is the highest rating a device can get. We believe these devices are among the best of their kind. These are included in the Proximus selection as well and we continuously retain stock of these.

Proximus often does projects with these devices, has experience using them and can help you deploy them. These can be ordered at Proximus and delivered smoothly.


Push button(2)

Temperature(1)

Push counter(3)

Shock(4)

Shock counter (5)

Angle(6)

• All MySense Generic need to be combined with a subscription of MyThings Favorite or Intense• Limited stock left at discount and replaced by MySense+ Generic (next page)

Functionality

Generic multi-purpose device with 6 modes:1. Temperature reporting every X min2. Push button: immediate alert when pressed3. Push button counting and transmission every X

min4. Shock: immediate alert when shock detected5. Shock counting and transmission every X min6. Angle: rotation detection and alert* Note: only 1 mode active at the same time; X = 15 min by default

Characteristics

• Network: LoRaWANTM

• Casing: IP65• Dimensions: 40 x 25 x 23 mm• Dimensions with holder: 50 x 50 x 28 mm• Operating Temperature: - 20 to 70 ° C• Measurement range: - 20 to 65 ° C• Accuracy: +/- 1,5 ° C, +/- 1 ° angle• Mounting: adhesive tape or black holder (3mm

screws not included) [right image]• Weight: 25g• Power: 1000 mAh battery (non-replaceable)• Configuration: local (push button) or remote (downlink)• MyThings thing type: MySense GenericCertifications

• Proximus IoT Qualified• LoRaWANTM certified• MyThings integrated

Multi-purpose deviceMySense Generic


Push button(2)

Temperature & Humidity (1)

Push counter(3)

Shock(4)

Shock counter (5)

Angle(6)

* All MySense+ Generic need to be combined with a subscription of MyThings Favorite or Intense

Functionality

Generic multi-purpose device with 6 modes:1. Temperature & Humidity reporting every X min2. Push button: immediate alert when pressed3. Push button counting and transmission every X

min4. Shock: immediate alert when shock detected5. Shock counting and transmission every X min6. Angle: rotation detection and alert* Note: only 1 mode active at the same time; X = 15 min by default

Characteristics


• Casing: IP67• Dimensions: 53 x 25 x 23,2 mm• Measurement range: - 20 to 70 ° C, 0 to 100% RH• Accuracy: +/- 1,5 ° C, +/- 3% RH, +/- 1 ° angle• Mounting: adhesive tape or screw through holes

(3mm screws not included) • Weight: 25g• Power: 1000 mAh battery (non-replaceable)• Configuration: local (push button) or remote (downlink)• MyThings thing type: MySense+ Generic

Certifications


Multi-purpose deviceMySense+ Generic



Functionality

• Temperature, humidity and luminosity monitoring: send it at defined time intervals of 3, 10, 30 or 60min.

• Detect movement in front of the device with a PIR sensor, in order to enable indicative passage counting.

Characteristics


• Casing: indoor, IP20• PIR opening/angle, range 130°, 5-6m distance• Dimensions: 86 x 86 x 25,5mm• Operating Temperature: 0 to 60 ° C• Measurement range: -40 to 60°C, 0-100%RH, 0-65k

Lux• Accuracy: 0,3 ° C, 1% RH, 3 Lux• Mounting: screws or adhesive tape• Weight: 120g• Power: 2x 3,6V battery (replaceable) or

5VDC power adapter (not included)• Configuration: DIP-Switches on backside device• MyThings thing type: Ambiance

Certifications


Possible use cases

• Fridge temperature monitoring• Smart building temperature & humidity monitoring• Proximus Smart Art solution

Environment monitoringTemperature, humidity, luminosity and passage counting



Functionality

• Temperature and humidity monitoring: send it at defined time intervals of 3, 10, 30 or 60min.

Characteristics


• Casing: indoor IP20• Dimensions: 86 x 86 x 25,5mm• Operating Temperature: 0 to 60 ° C• Measurement range: -40 to 60 ° C, 0 to 100% RH• Accuracy: 0,3 ° C, 1% RH• Mounting: screws or adhesive tape• Weight: 120g• Power: 2x 3,6V battery (replaceable) or

5VDC power adapter (notincluded)

• Configuration: DIP-Switches on backside device• MyThings thing type: Environment

Certifications


Possible use cases

• Fridge temperature monitoring• Smart building temperature & humidity monitoring

Environment monitoringTemperature & humidity



Functionality

• Temperature and humidity monitoring.➢ Mode of transmission (configured before delivery by

vendor):o Reporting mode: Periodically measure and

transmit the temperature & humidity (interval adjustable)

o Immediate alert mode: Short measurement interval and immediate notification when the temperature or humidity exceeds configured low or high limits

Characteristics


• Casing: indoor• Dimensions: 86 x 86 x 25,5mm• Operating Temperature: 0 to 55 ° C• Measurement range: -40 to 85 ° C, 0-100% RH• Accuracy: 0,3 ° C, 2% RH• Mounting: screws or adhesive tape• Weight: /• Power: 3,6V battery (replaceable)• Configuration: configuration is done by vendor

before delivery• MyThings thing type: Humidi indoor

Certifications


Possible use cases

• Fridge temperature monitoring• Smart building temperature & humidity monitoring

Environment monitoringTemperature & humidity



Functionality

• (internal and external) temperature monitoring. The external temperature probe serves to monitor temperatures in environments with very low or very high temperature in which normal electronics don’t function.➢ 2 modes of transmission:

o Periodic transmission of the temperature measurement

o Event based transmission: when the temperature exceeds a configurable low or high temperature threshold

Characteristics


• Casing: outdoor, IP67• Dimensions: 105 x 50 x 27 mm• Operating Temperature: -20 ° C to + 75 ° C• Measurement range: internal sensor: -30 to +70 °C;

external probe: -55 to +155 °C• Accuracy/resolution: 0,1 °C / 0,01 °C• Mounting: DIN-Rail, Collar• Weight: 130g • Power: 3,6V battery (replaceable)• Configuration: local (micro-USB) • MyThings thing type: Temp• Miscellaneous: cable length 2m; magnet needed

to (re)start the device

Certifications

• Proximus IoT Qualified• LoRaWANTM certified• MyThings integrated• Radio standards EN 300-220, EN 301-489, EN 60950

Possible use cases

• Remotely monitor temperature of rooms, pipes, machines• Extreme temperature monitoring• Cold chain monitoring

Environment monitoringExtreme temperature



Functionality

• CO2, temperature and relative humidity monitoring in a room or office.➢ Possible modes of transmission (by configuration):o Periodic transmission of CO2, temperature, relative

humidity and battery level.o Event based transmission: when a CO2,

temperature or humidity high or low threshold is reached

Characteristics


• Casing: indoor• Dimensions: 97 x 38 x 25 mm• Operating Temperature: -10 ° C to + 55 ° C• Accuracy: +/- 0,3 ° C, +/- 2% RH• Weight: /• Power: 3,6V battery (replaceable)• Configuration: remote (downlink)• MyThings thing type: CO2

Certifications

• Proximus IoT Qualified• MyThings integrated

Possible use cases

• Smart building CO2, temperature and humidity monitoring

Environment monitoringCO2, temperature & humidity



Functionality

• Count the passage of people through a door and send frequent updates of this counter. This device is mounted above a door with the PIR sensor facing downwardsAll people passing by in the same 3s will be counted as 1 which is inherent to the PIR technology.➢ Periodic based counting & transmission

Characteristics


• PIR opening angle: 10 by 20 °• Casing: indoor IP30• Dimensions: 91,5 x 50 x 25mm• Operating Temperature: 0 ° C to +55 ° C• Mounting: double-sided adhesive tape or

with countersunk screws• Weight: 75g• Power: 3,6V battery (replaceable)• Configuration: local (with RFID tool) & remote

(downlink)• MyThings thing type: PIR• Miscellaneous: magnet needed to (re)start the

device

Certifications


Possible use cases

• Footfall traffic• Usage-based cleaning services• Room occupancy

Presence detectionPIR sensor above doors



Functionality

• Detect the presence or absence of people in a space or at a desk by detecting movement in front of it. It can at the same time measure the temperature and humidity of the space where it is located.➢ Mode of transmission (configured before delivery by

vendor):• Reporting mode: Periodically measure and

transmit the occupancy status every reporting interval (interval adjustable)

• Immediate alert mode: Short measurement interval. Immediate notification when motion is detected.

Characteristics


• PIR opening/angle, range 94 by 82 °, 5m distance• Casing: indoor• Dimensions: 86 x 86 x 25.5mm• Accuracy 0,3 ° C, 2% RH• Resolution: 0,01 ° C, 0,01 % RH• Range: -20 ° C to +85 ° C, 0 to 100 %

RH• Mounting: screws / adhesive tape• Power: 3,6V battery (replaceable)• Configuration: configuration is done by vendor

before delivery• MyThings thing type: Pirio+

Certifications


Possible use cases

• Desk occupancy for flex desk usage• Room occupancy, gain insight into how office spaces are

used.• Intrusion detection (when ordered with immediate alert

mode)

Presence detectionPIR sensor with additional temperature & humidity



Functionality

• Detect & alert the opening / closing of doors and/or count the number of times it is opened or closed This device consists out of 2 pieces, One piece is a magnet that can be placed on e.g. a door. The other piece is a magnetic detector. ➢ Possible modes of transmission (by configuration):

o Event based:• Send when a door is opened or closed• Send when a door is opened ‘x’ amount of

timeso Time based:

• Send the number of times the door is opened when a certain time is elapsed

Characteristics


• Casing: indoor• Dimensions: 98 x 38 x25 mm• Operating Temperature: -10 ° C to +55 ° C• Mounting: mounting bracket• Weight: /• Power: 3,6V battery (replaceable)• Configuration: remote (downlink)• MyThings thing type: magnetic pulse

Certifications


Possible use cases

• Intrusion detection and alerting (e.g. a secure or dangerous location)

• Room occupancy• Footfall activity• Usage based toilet cleaning• Proximus Stairway to health project

Presence detectionMagnetic contact for doors, windows, etc. monitoring



Functionality

• Detect & alert the opening / closing of doors and/or count the number of times it is opened or closed This device consists out of 2 pieces, One piece is a magnet that can be placed. The other piece is a magnetic detector.

• Temperature and humidity monitoring.➢ Possible modes of transmission (by configuration):o Event based:

• When a door is opened or closed• When a door is opened ‘x’ amount of times• When a temperature or humidity high or low

threshold is reachedo Time based:

• send the number of times the door is opened when a certain time is elapsed

Characteristics


• Casing: indoor• Dimensions: 98 x 38 x25 mm• Operating Temperature: -10 ° C to +55 ° C• Accuracy: +/- 0,3 ° C, +/- 2% RH• Mounting: mounting bracket• Weight: /• Power: 3,6V battery (replaceable)• Configuration: remote (downlink)• MyThings thing type: magnetic door contact with

temperature & humidity

Certifications


Possible use cases

• Intrusion detection and alerting (e.g. a secure or dangerous location)

• Room occupancy with room temperature monitoring• Footfall activity• Usage based toilet cleaning• Proximus Stairway to health project

Presence detectionMagnetic contact with temperature & humidity



Functionality

• Track the location via GPS and sends the GPS coordinates of your assets.

• Alerting when the device is moved / rotated➢ Default firmware:

o Developed for theft protection: sends alarms every 20min when the device is moved / rotated until it stops moving / rotating. Firmware for other use cases can be developed.

➢ Mode of transmission:o Periodic GPS updateo Alert when rotation/movement is detected

Characteristics


• Casing: outdoor, IP66• Dimensions: 102 x 50 x 90 mm• Operating Temperature: -40 ° C to +70 ° C• Mounting: (security) screws• Weight: 240g• Power: military grade battery (non-

replaceable)• Configuration: remote (downlink)• MyThings thing type: Asset Tracker• Miscellaneous: magnet needed to (re)start the

device

Certifications


Possible use cases

• Copper theft protection/prevention on wooden bobbins• Get a view of your stock of copper in the field

GPS TrackingAsset tracker for wooden bobbins



Functionality





Characteristics


• Casing: outdoor, IP67, stainless steel body

• Dimensions: 90 x 50 x 50 mm• Dimensions with backplate:129 x 50 x 53 mm• Operating Temperature: -40 ° C to +70 ° C• Mounting: mounting plate• Weight: 640g• Power: military grade battery (non-


device

Certifications


Possible use cases

• Copper theft protection/prevention on metal bobbins• Get a view of your stock of copper in the field• GPS tracking of trolleys, fleet of trucks, containers, etc.

GPS TrackingAsset tracker for steel bobbins, trolleys, containers, etc.



Functionality





Characteristics


• Casing: outdoor, IP66• Dimensions: 100 x 50 x 50 mm• Operating Temperature: -40 ° C to +70 ° C• Mounting: inserted in a hole in the pallet• Weight: 200g• Power: military grade battery (non-


device

Certifications


Possible use cases

• GPS tracking of pallets with valuable goods• Theft protection/prevention on pallets• Get a view and location of your goods

GPS TrackingAsset tracker for pallets



Functionality

• Tracks the location via GPS and sends the GPS coordinates of your asset.

• Movement detection and alerts when the device has started or stopped moving.➢ Mode of transmission:

o Periodic GPS updateo Event based:

• When started or stopped moving• Faster GPS updates when device is in

transit

Characteristics


• Casing: outdoor IP67• Dimensions: 100 x 60 x 37 mm• Operating Temperature: -20 ° C to +85 ° C• Mounting: magnets (optional) or screws

(not included)• Weight: /• Power: 8,8 Ah battery (replaceable)• Configuration: remote (downlink)• MyThings thing type: MCS1608 Tracker

Certifications


Possible use cases

• GPS tracking of trolleys, fleet of trucks, containers, etc

GPS TrackingAll-round asset tracker



Functionality

• Tracks the location via GPS and sends the GPS coordinates of your asset.

• Movement detection and alerts when the device has started or stopped moving.➢ Mode of transmission:

o Periodic GPS updateo Event based:

• When started or stopped moving• Faster GPS updates when device is in transit

• Additional sensors on board:• Temperature and rotation via magnetometer, gravity

sensor• Optional: connect a 1Wire sensor and/or 2x digital I/O

and /or 2x analog input for 0-5V DC measurement• Humidity, barometer via screw vent (not included)

Characteristics


• Casing: outdoor IP67• Dimensions: 100 x 60 x 37 mm• Operating Temperature: -20 ° C to +85 ° C• Mounting: magnets (optional) or screws

(not included)• Weight: /• Power: 8,8 Ah battery (replaceable)• Configuration: remote (downlink)• MyThings thing type: MCS1608 Full

Certifications


Possible use cases

• GPS tracking of trolleys, fleet of trucks, containers, etc

GPS TrackingAll-round asset tracker with additional sensors



Functionality

• Track the GPS location of something. A collar can be attached to the device. The device also contains a push button to call for help and send an extra GPS location.➢ Transmission modes:

o Periodic mode: GPS update every ‘x’ mino Motion mode: fast GPS updates when the

device is moving

Characteristics


• Casing: outdoor IPX7• Dimensions: 69,5 x 45,5 x 19,6 mm• Operating Temperature: -20 ° C / + 60 ° C• Mounting: collar, lanyard, clip-on belt

accessory• Weight: 57g• Power: 820mAh battery (rechargeable)• Configuration: local (micro-USB) • MyThings thing type: GPS Tracker

Certifications


Possible use cases

• Object tracking

GPS TrackingSmall tracker



Functionality

• A ready-to-use radio transmitter enabling the user to transform any type of meter into a wireless meter (smart meter). The device can count pulses and send that counter.Two 3 wires-meters or one 5 wires-meters may be controlled by a single device.➢ Modes of transmission:

o Periodic transmissiono Periodic transmission with buffered

measurements in between transmissionso Event based: Flow threshold alarm (high or

low)

Characteristics


• Casing: outdoor, IP67• Dimensions: 105 x 50 x 27 mm• Operating Temperature: -20 ° C / + 70 ° C• Mounting: DIN-Rail, Collar• Weight: 70g • Power: 3,6V battery (non-replaceable)• Configuration: local (micro-USB) & remote

(downlink)• MyThings thing type: Pulse• Miscellaneous: magnet needed to (re)start the

device

Certifications


Possible use cases

• Connect a water, gas or electricity meter to read out the consumption remotely.(may need extra hardware to generate the pulse on the meter depending on the meter)

LoRaWAN modemPulse



Functionality

• A ready-to-use radio transmitter enabling the user to transform any type of meter into a wireless meter (smart meter). The device can count pulses and send that counter.Two 3 wires-meters or one 5 wires-meters may be controlled by a single device.➢ Modes of transmission:

o Periodic transmissiono Periodic transmission with buffered

measurements in between transmissionso Event based: Flow threshold alarm (high or

low)

Characteristics


• Casing: outdoor, IP67• Dimensions: 105 x 50 x 27 mm• Operating Temperature: -20 ° C / + 70 ° C• Mounting: DIN-Rail, Collar• Weight: 70g • Power: 3,6V battery (non-replaceable)• Configuration: local (micro-USB) & remote

(downlink)• MyThings thing type: Pulse• Miscellaneous: magnet needed to (re)start the

device

Certifications

• Proximus IoT Qualified• LoRaWANTM certified• MyThings integrated• ATEX II 2GD/Ex ib IIC T3 Gb/Ex ib IIIC T200°C Db/-

20°C<=Ta<=40°C

Possible use cases

• Connect a water, gas or electricity meter in an ATEX environment to read out the consumption remotely.(may need extra hardware to generate pulse on meter)

LoRaWAN modemPulse ATEX



Functionality

• A ready-to-use radio transmitter enabling the user to transfer statuses and alarms or control a relay.4 configurable inputs or outputs➢ 2 modes of transmission:

o Periodic transmission of an event countero Alert when change on input (high, low edge or

both)

Characteristics

• Network: LoRaWANTM Class A• Casing: outdoor, IP67• Dimensions: 105 x 50 x 27 mm• Operating Temperature: -20 ° C / + 75 ° C• Mounting: DIN-Rail, Collar• Weight: 93g • Power: 3,6V battery (replaceable)• Configuration: local (micro-USB) & remote

(downlink)• MyThings thing type: Dry contacts• Miscellaneous: cable length 70cm + 10 cm bare

wire; magnet needed to (re)start the device

Certifications


Possible use cases

• Remote ON/OFF state monitoring of equipment, machines, etc.

• Remotely start machinery (LoRaWANTM Class A: by downlink after uplink of device)

• Door opening or access control monitoring & alerting

LoRaWAN modemDigital inputs / dry contacts



Functionality

• A ready-to-use radio transmitter enabling any type of 0-10V or 4-20mA sensor to be converted into a wireless communicating sensor.2 analog inputs available per device.➢ 3 modes of transmission:

o Periodico Alert when change on inputo Alert when low or high threshold exceeded

* Note: this device can transmit measurements of sensors but does not feed them

Characteristics


• Casing: outdoor, IP67• Dimensions: 105 x 50 x 27 mm• Operating Temperature: -20 ° C / + 75 ° C• Mounting: DIN-Rail, Collar• Weight: 70g • Power: 3,6V battery (replaceable)• Configuration: local (micro-USB) & remote

(downlink)• MyThings thing type: Analog• Miscellaneous: magnet needed to (re)start the

device

Certifications


Possible use cases

• Connect existing sensors• Tank level monitoring (4-20mA)

LoRaWAN modemAnalog inputs



Functionality

• A ready-to-use radio transmitter enabling any type of 0-10V or 4-20mA sensor to be converted into a wireless communicating sensor.2 analog inputs available per device➢ 3 modes of transmission:

o Periodico Alert when change on inputo Alert when low or high threshold exceeded

* Note: this device can transmit measurements of sensors but does not feed them

Characteristics


• Casing: outdoor, IP67• Dimensions: 105 x 50 x 27 mm• Operating Temperature: -20 ° C / + 75 ° C• Mounting: DIN-Rail, Collar• Weight: 70g • Power: powered by external 5-36V DC,

90mA power supply• Configuration: local (micro-USB) & remote

(downlink)• MyThings thing type: Analog• Miscellaneous: magnet needed to (re)start the

device

Certifications


Possible use cases

• Connect existing sensors• Tank level monitoring (4-20mA)

LoRaWAN modemAnalog inputs with external power supply



Functionality

• A ready-to-use radio transmitter enabling the user to transfer statuses and alarms on its digital inputs or read out a voltage from remote.

• 2x digital inputs to alert a state change or count the number of state changes

• 2x analog inputs to read out 0-5V DC voltage• 1x 1-Wire attachable device/sensor (like temperature or

humidity 1-Wire sensor)➢ Mode of transmission:

o Periodic 1-255mino Count based for digital inputs

* Note: extra analog, digital or 1-Wire cable with connector needed.

Characteristics


• Casing: outdoor IP67• Dimensions: 100 x 60 x 37 mm• Operating Temperature: -20 ° C to +85 ° C• Mounting: magnets or screws• Weight: /• Power: 8,8 Ah Li-SOCl2 battery

(replaceable)• Configuration: remote (downlink)• MyThings thing type: MCS1608 IO

Certifications


Possible use cases

• Remote ON/OFF state monitoring of equipment, machines, etc.

• Connect and read out existing sensors remotely

LoRaWAN modemAnalog, digital & 1-Wire inputs



Functionality

• A ready-to-use radio transmitter with a MODBUS interface

• The device could handle, as the modbus master, up to 10 slaves with 15 registers by slave (max 24 registers in total).

• The product transmits the data from the slaves either periodically or in an event-related way based on high or low thresholds.

• RS232 and RS485 Compatible

Characteristics


• Casing: outdoor, IP67• Dimensions: 105 x 50 x 27 mm• Operating Temperature: -20 ° C / + 75 ° C• Mounting: DIN-Rail, Collar• Weight: 70g • External Power Supply: DC 6-24V (Max 90mA)• Configuration: local (micro-USB) & remote

(downlink)• MyThings thing type: Modbus• Miscellaneous: cable length 70cm

Certifications


Possible use cases

• Modbus monitoring & alerting

LoRaWAN modemModbus



Certifications


Possible use cases

• Satisfaction buttons in offices, retail stores to get feedback from customers, employees etc.

• Customer interaction• Usage based toilet cleaning• Room occupancy: occupy the room for 30 min by pressing

the button in the meeting room

Smart buttonWireless push button

Functionality

• Push button for home, retail or office environments• Led feedback when pressed

➢ Mode of transmission (configured before delivery by vendor):

o Event based:• When button is pressed shortly • When button is pressed long• When button is pressed short multiple times

(max 1,5s in between) in the last 10s• When button is pressed long multiple times

(max 1,5s in between) in the last 10s

Characteristics


• Casing: indoor• Dimensions: 86 x 86 x 25,5 mm• Operating Temperature: 0 to 55 ° C• Mounting: screws or adhesive tape• Weight: /• Power: 3,6V battery (replaceable)• Configuration: configuration is done by vendor

before delivery• MyThings thing type: Push1+1



Smart buttonWireless push button

Possible use cases

• Satisfaction campaign buttons in offices, retail stores to get feedback from customers, employees etc.

• Customer interaction• Usage based toilet cleaning• Room occupancy: occupy the room for 30 min by pressing

the button in the meeting room

Functionality

• Push button for home, retail or office environments.• Led feedback when pressed Possible

➢ Modes of transmission (by configuration):o Event based:

• Alert when the button is pushed• Alert when the button is pushed ‘x’ amount of

timeso Time based:

• send the push counter when a certain time is elapsed

Characteristics


• Casing: indoor• Dimensions: 73 x 85 x 55 mm• Operating Temperature: 20 ° C to +55 ° C• Weight: /• Power: 3,6V 2,7A battery (replaceable)• Configuration: remote (downlink)• MyThings thing type: Push Button

Certifications




Smart buttonIndustrial wireless push button

Functionality

• Push button with industrial look & feel.➢ Modes of transmission (by configuration):

o Event based:• Alert when the button is pushed• Alert when the button is pushed ‘x’ amount of

timeso Time based:

• send the push counter when a certain time is elapsed

Characteristics


• Casing: indoor• Dimensions: 90 x 65 x 55 mm• Operating Temperature: 20 ° C to +55 ° C• Weight: /• Power: 3,6V 2,7A battery (replaceable)• Configuration: remote (downlink)• MyThings thing type: Push Button

Certifications


Possible use cases

• Manufacturing: an operative can press the button to alarm that his stock of materials is almost empty and if not replenished soon the manufacturing chain will not be able to continue to run.



Functionality

• Measure the consumption on your single-phase or three-phase electrical installation.With 12 attachable clamps to the same device, you can sub-meter your electrical installation to know how much power each part consumes.4 clamp sizes available: 10, 16, 24 and 36mm diameter with max current from 60-600A (clamps to be ordered separately)➢ Modes of transmission

o Periodic transmission each 10, 20, 30 or 60 min.

Characteristics


• Casing: indoor• Dimensions: 90 x 88 x 62 mm• Operating Temperature: 0 ° C to +50 ° C• Mounting: DIN-rail or wall• Weight: 152g (without clamps)• Accuracy: +-5%• Power: 5V DC power needed

(230V AC to 5V DC DIN-rail)• Configuration: DIP-Switches on backside device• MyThings thing type: Squid

Certifications


Possible use cases

• Smart building current consumption monitoring

EnergyPower consumption monitoring



Functionality

• Reboot, shutdown or supply power to devices or appliances from a distance via the network.

• Detect when the power falls out (or turned back on). It contains a backup battery for sending messages when the power is off.➢ Modes of transmission:

o Event based• When the power falls out• When the power is back on again

o Periodic based• Hourly status update

Certifications


Possible use cases

• Smart building• Smart home• Appliance monitoring

EnergySmartplug

Characteristics

• Network: LoRaWANTM Class C• Casing: indoor• Dimensions: 120 x 65 x 66 mm• Relay: 230V, 16A• Mounting: EU electricity socket• Weight: /• Power: DC power supply + 3,6V backup

battery• Configuration: configuration is done by vendor

before delivery; remote (downlink) toggle on/off possible

• MyThings thing type: Plugio



Fill levelUltrasonic range for waste management

Functionality

• Measure the fill level of containers. It can be mounted on the inside of a waste bin for example. The device contains 2 ultrasonic distance sensors for extra accuracy. It can take from 1 to 24 measurements before doing a transmission.➢ Modes of transmission:

o Periodic based• Send the last 24 measurements of the percentage

o Event based• When low or high temperature threshold is surpassed

(vandalism)• When the sensor detected a rotation of x degrees

(emptying, vandalism)

* Note: the device requires a connectivity subscription with downlinks (for acknowledgements of uplink messages)

Certifications


Possible use cases

• Filling percentage in large waste bins

Characteristics


• Casing: outdoor, IP66• Dimensions: /• Distance measurement: 35 cm to 300 cm• Operating Temperature: - 20 to +85 ° C• Mounting: assembly bush• Weight: /• Power: military grade 2600mA battery

(non-replaceable)• Configuration: remote (downlink)• MyThings thing type: Ultrasonic Range• Miscellaneous: magnet needed to (re)start the

device



Fill levelUltrasonic range for waste management with external antenna

Functionality

• Measure the fill level of containers. It can be mounted on the inside of a waste bin for example. The device contains 2 ultrasonic distance sensors for extra accuracy. It can take from 1 to 24 measurements before doing a transmission.➢ Modes of transmission:

o Periodic based• Send the last 24 measurements of the percentage

o Event based• When low or high temperature threshold is surpassed

(vandalism)• When the sensor detected a rotation of x degrees

(emptying, vandalism)

* Note: the device requires a connectivity subscription with downlinks (for acknowledgements of uplink messages)

Certifications


Possible use cases

• Filling percentage in large waste bins

Characteristics


• Casing: outdoor, IP66• Dimensions: /• Distance measurement: 35 cm to 300 cm• Operating Temperature: - 20 to +85 ° C• Mounting: assembly bush• Weight: /• Power: military grade 2600mA battery

(non-replaceable)• Configuration: remote (downlink)• MyThings thing type: Ultrasonic Range• Miscellaneous: magnet needed to (re)start the

device



Fill levelLPG tank monitoring with Rochester gauge

Functionality

• The device is able to read out the dial-gauge position and send the fill level of the tank over the network. It can take frequent measurements and buffer that data locally until the next transmission which saves on battery life.

• It works with Rochester gauge R3D/TwinsiteSenior/Junior (5V version)

• Configurable reporting schedule and alarms from remote• 2 modes of transmission:

• Periodic transmission of the tank fill level with buffered measurements

• Event based transmission: when the fill level exceeds a configurable low or high threshold

* Note: the device requires a connectivity subscription with downlinks for acknowledgements of 1 in 4 uplink messages

Certifications

• Proximus IoT Qualified• LoRaWANTM certified V1.0.2• MyThings integrated• ATEX Directive 2014/34/EU: ATEX Zone II 2 G Ex ib IIA T3

Gb

Possible use cases

• Connecting existing LPG tanks• Refill tanks based on monitored levels of all tanks in the

field

Characteristics


• Casing: IP68, IK06, UL94-V0, UV resistant

• Dimensions: 60 x 105 x 73mm• Operating Temperature: -20 ° C to + 55 ° C• Mounting: Wall mount /w screws, Vertical

or horizontal pipe mounting /w cable ties

• Weight: 220g (excl. gauge)• Power: 3.6V 3.6Ah battery (non-

replaceable)• Configuration: remote (downlink)• MyThings thing type: LPG tank fill level



Functionality

• Test and verify the coverage indoor or outdoor,➢ 2 modes of transmission:

o Periodic basedo Event based: by pushing the button

• Data displayed on the screen: • UL / DL, RSSI/SNR/PER, channels, GPS,

temperatureNote: the signal strength (RSSI) on the screen is the signal strength of the downlink message received by the device. For uplink coverage please check the network logs on the MyThings platform.* Note: the device requires a connectivity subscription with downlinks (for acknowledgements of uplink messages)

Characteristics


• Casing: indoor• Dimensions: 180 x 72 x 21 mm• Operating Temperature: -20 ° C to + 75 ° C• Weight: 140g • Power: battery (rechargeable)• Configuration: local (micro-USB)• MyThings thing type: Demo sensor

Certifications


Possible use cases

• Network coverage testing at remote locations

Field testingLoRaWANTM network tester



IoT Coverage ExtenderLoRaWANTM ICE Ethernet

Functionality

• The LoRaWANTM ICE can provide extra LoRaWANTM

coverage indoor in a building or site. It works as a bridge between the Proximus LoRaWANTM network and an ethernet connection.

• We provide these ICEs in a renting formula.• We have different types and will provide you with the

model that is currently in stock.

* Note: The ICE requires an ethernet connection. A company firewall may block the connections used by the ICE. If there is a firewall present, you will be required to open a list of specific ports and IP addresses used by the ICE on the firewall

Certifications


Possible use cases

• Extending coverage indoor

Characteristics


• Casing: Indoor• Mounting: On flat surface or against the

wall• Backhaul: Ethernet• Power: Standard EU electricity socket



IoT Coverage ExtenderLoRaWANTM ICE Cellular

Functionality

• The LoRaWANTM ICE can provide extra LoRaWANTM

coverage indoor in a building or site. It works as a bridge between the Proximus LoRaWANTM network and Proximus cellular network connection (3G/4G). An additional ethernet connection is also available.

• We provide these ICEs in a renting formula.• We have different types and will provide you with the

model that is currently in stock.

* Note (only if the ethernet connection is used): A company firewall may block the connections used by the ICE. If there is a firewall present, you will be required to open a list of specific ports and IP addresses used by the ICE on the firewall

Certifications


Possible use cases

• Extending coverage indoor

Characteristics


• Casing: Indoor• Mounting: On flat surface or against the

wall• Backhaul: Cellular (3G/4G), ethernet is also

available as backup• Power: Standard EU electricity socket


Thank you

More [email protected]


All information in this document is non contractual

Documents

IoT Device Catalogue - Proximus EnCo · IoT Qualified The IoT device has been tested by Proximus and deemed compatible with one of the Proximus IoT networks. MyThings integrated The