Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
IOU SeriesManual
Index
p3-5
p6
p7-10
p11-13
p14-16
Product description
Recycling
Assembly instructions|IOU Back
Assembly instructions|IOU Bench
Maintenance & Repair
IOU Series Green Furniture Concept3
Ribs
Metal legs
Metal strip
Metal legsMetal strip
Ribs
IOU Back module
IOU Bench module
Product descriptionParts
IOU Series Green Furniture Concept4
IOU Back can be made to any curvature between 0-45 degrees, both concave and convex. Stand-ard modules are straight and convex /concave 45 degrees.
By opening the drawbolt catch the bench modules can be easily moved for annual cleaning or for reconfiguration.
Product descriptionApperance
The bench modules are snapped together and locked with a draw-bolt catch.
IOU Series Green Furniture Concept5
IOU ribs
The ribs are treated with hard wax oil which gives surface protection and color. Standard or custom colors can be chosen as well as color mixes. Special fire retardant treatment can be added.
The ribs are made of beech or maple veneer with a surface veneer of oak or other wood of choice. The table tops are made of massive beech, oak or other wood of choice.
Product descriptionApperance
IOU Series Green Furniture Concept6
Glides are made of PE and are sorted as plastic.
Recycling
The ribs are made of wood and are sorted as combustible.
Legs, strips, and small parts are madeof steel and are sorted as metal.
IOU Series Green Furniture Concept7
IOU Back Leg x2 IOU Back rib x17 IOU Seat rib x17
IOU Glides x4
Drawbolt Catch x1
IOU Back metal strip x2
Bolt A x20
Screw B x12
Screw A x90
Note: If you have a curved bench you will have two back metal strips in different lenght.
Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or similar to prevent damage to the ribs and metal parts.
Assembly instructionsIOU Back
IOU Seat metal strip x2
Note: If you have a curved bench you will have two seat metal strips in different lenght.
Bolt B x8
Nut A x8
IOU Series Green Furniture Concept8
Use bolt A to attach glides to the legs.
Use screw A to attach seat metal strips to theseat ribs. Do not attach the outermost rib on each side.
Use screw A to attach seat metal strips to theseat ribs. Do not attach the outermost rib on each side.
Use screw A to attach seat metal strips to theseat ribs. Do not attach the outermost rib on each side.
.
Assembly instructionsIOU Back
2b 2c
3a 3b
1 2a
Use screw A to attach back metal strips to theback ribs. Do not attach the outermost rib on each side.
Use screw A to attach back metal strips to theback ribs. Do not attach the outermost rib on each side.
IOU Series Green Furniture Concept9
Use bolt A to attach the back to the legs. Do not attach bolts in the center holes, use the upper and lower holes on each metal strip.
Use bolt B and nut A to attach the seat to thelegs. Use the wider holes and make sure that
Use screw B to attach the last back ribs.
Assembly instructionsIOU Back
5 6
8a
3c 4
Use screw A to attach back metal strips to theback ribs. Do not attach the outermost rib on each side.
nut A is mounted from the bottom.
Use screw B to attach the last seat ribs.
7
Use bolt A to attach drawbolt catch. Attach thelock in the inner holes. When buildning a series of benches make sure to put each lock on the same side of the benches.
IOU Series Green Furniture Concept10
Assembly instructionsIOU Bench
8b 9
Use the drawbolt catch to snap the benches together.
Use bolt A to attach drawbolt catch. Attach thehook in the outer holes. When buildning a series of benches make sure to put each lock on the same side of the benches.
IOU Series Green Furniture Concept11
IOU Bench Leg x2 IOU Seat rib x17 IOU Glides x4
Drawbolt Catch x1
Note: If you have a curved bench you will have two seat metal strips in different lenght.
Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or similar to prevent damage to the ribs and metal parts.
Assembly instructionsIOU Bench
IOU Seat metal strip x2
Bolt A x12
Screw B x8
Screw A x60
Bolt B x8
Nut A x8
IOU Series Green Furniture Concept12
Use bolt A to attach glides to the legs.
Assembly instructionsIOU Bench
2b 2c
3 4
1 2a
Use screw A to attach seat metal strips to theseat ribs. Do not attach the outermost rib on each side.
Use screw A to attach seat metal strips to theseat ribs. Do not attach the outermost rib on each side.
Use screw A to attach seat metal strips to theseat ribs. Do not attach the outermost rib on each side.
Use bolt B and nut A to attach the seat to thelegs. Use the wider holes and make sure that nut A is mounted from the bottom. Use screw B to attach the last seat ribs.
IOU Series Green Furniture Concept13
Assembly instructionsIOU Bench
5a
Use the drawbolt catch to snap the benches together.
6
5b
Use bolt A to attach drawbolt catch. Attach thelock in the inner holes. When buildning a series of benches make sure to put each lock on the same side of the benches.
Use bolt A to attach drawbolt catch. Attach thehook in the outer holes. When buildning a series of benches make sure to put each lock on the same side of the benches.
IOU Series Green Furniture Concept14
Background
The IOU Series wooden ribs are treated with hardwax Rubio Monocoat Oil Plus 2C, a maintenance series that is environmentally sound. We recommend that you use the Rubio Monocoats (Rubio) products for oiling to cleaning and maintenance, as these products are environmentally friendly and designed to be compatible at each stage.
Weekly cleaning
First cleaning can be done within six days after the original treatment. 1 Brush ribs from dirt and dust. 2 Immerse a cotton cloth or microfiber towel in a solution of Rubio Monocoat Soap. (Mixing ratio: 150ml RMC Soap per 10 liters of water. Wring out to semi-wet cloth) 3 Wipe 2-4 square meters of ribs. 4 Rinse the cloth in the bucket with clean water and wring out thoroughly.
Cleaning with RMC Soap helps to preserve the surface protection and helps to keep the matte surface
Maintenance/Repair
IOU Series Green Furniture Concept15
Note The product may NOT be diluted!Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.
1: Dark Oak rib 2: Scratched Dark Oak rib 3: Clean area with sandpaper or cloth
4: 5: Spread out a small quantity ofthe mix with a cloth. 6: Let the oil absorb during a few minutes.
7: Remove all excess oil with a dry cloth. 8: Treated Dark Oak rib. Let dry for at least 12h.
Touch up / Maintenance
Scratches can be touched up by local treatment with Rubio Monocoat Oil Plus 2C, with color according to the original treatment, giving no joints, making the damage less visible and gives the injured surface back it’s surface protection. Maintenance cycle depends on rate of use/wear.
Maintenance/Repair
IOU Series Green Furniture Concept16
Tightening the screws
Depending on humidity, screws and bolts may need to be tightened 3-6 months after delivery, otherwise the construction may become loose (applies to all wooden structures). Check the screws and bolts once a year.
Replace rib
If for any reason you need to change any of your ribs, it's easy to do.
Unscrew the four screws that belongs to the damaged rib or ribs.
Add the new rib or ribs. Screw the new rib or ribs in place.
Remove the damaged rib or ribs.
Maintenance/Repair
1 2
3 4
greenfc.com